718cf2ccb9
Mainly focus on files that use BSD 2-Clause license, however the tool I was using misidentified many licenses so this was mostly a manual - error prone - task. The Software Package Data Exchange (SPDX) group provides a specification to make it easier for automated tools to detect and summarize well known opensource licenses. We are gradually adopting the specification, noting that the tags are considered only advisory and do not, in any way, superceed or replace the license texts.
543 lines
20 KiB
C
543 lines
20 KiB
C
/*-
|
|
* SPDX-License-Identifier: BSD-2-Clause OR GPL-2.0
|
|
*
|
|
* This file is provided under a dual BSD/GPLv2 license. When using or
|
|
* redistributing this file, you may do so under either license.
|
|
*
|
|
* GPL LICENSE SUMMARY
|
|
*
|
|
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of version 2 of the GNU General Public License as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
|
|
* The full GNU General Public License is included in this distribution
|
|
* in the file called LICENSE.GPL.
|
|
*
|
|
* BSD LICENSE
|
|
*
|
|
* Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* * Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
/**
|
|
* @file
|
|
* @brief This file defines all of the SCSI related constants, enumerations,
|
|
* and types. Please note that this file does not necessarily contain
|
|
* an exhaustive list of all constants, commands, sub-commands, etc.
|
|
*/
|
|
|
|
#ifndef _SCSI_H__
|
|
#define _SCSI_H__
|
|
|
|
|
|
//******************************************************************************
|
|
//* C O N S T A N T S A N D M A C R O S
|
|
//******************************************************************************
|
|
|
|
/**
|
|
* @enum _SCSI_TASK_MGMT_REQUEST_CODES
|
|
*
|
|
* @brief This enumberation contains the constants to be used for SCSI task
|
|
* management request codes. SAM does not specify any particular
|
|
* values for these codes so constants used here are the same as
|
|
* those specified in SAS.
|
|
*/
|
|
typedef enum _SCSI_TASK_MGMT_REQUEST_CODES
|
|
{
|
|
SCSI_TASK_REQUEST_ABORT_TASK = 0x01,
|
|
SCSI_TASK_REQUEST_ABORT_TASK_SET = 0x02,
|
|
SCSI_TASK_REQUEST_CLEAR_TASK_SET = 0x04,
|
|
SCSI_TASK_REQUEST_LOGICAL_UNIT_RESET = 0x08,
|
|
SCSI_TASK_REQUEST_I_T_NEXUS_RESET = 0x10,
|
|
SCSI_TASK_REQUEST_CLEAR_ACA = 0x40,
|
|
SCSI_TASK_REQUEST_QUERY_TASK = 0x80,
|
|
SCSI_TASK_REQUEST_QUERY_TASK_SET = 0x81,
|
|
SCSI_TASK_REQUEST_QUERY_UNIT_ATTENTION = 0x82,
|
|
|
|
} SCSI_TASK_MGMT_REQUEST_CODES;
|
|
|
|
/**
|
|
* @enum _SCSI_TASK_MGMT_RESPONSE_CODES
|
|
*
|
|
* @brief This enumeration contains all of the SCSI task management response
|
|
* codes.
|
|
*/
|
|
typedef enum _SCSI_TASK_MGMT_RESPONSE_CODES
|
|
{
|
|
SCSI_TASK_MGMT_FUNC_COMPLETE = 0,
|
|
SCSI_INVALID_FRAME = 2,
|
|
SCSI_TASK_MGMT_FUNC_NOT_SUPPORTED = 4,
|
|
SCSI_TASK_MGMT_FUNC_FAILED = 5,
|
|
SCSI_TASK_MGMT_FUNC_SUCCEEDED = 8,
|
|
SCSI_INVALID_LUN = 9
|
|
} SCSI_TASK_MGMT_RESPONSE_CODES;
|
|
|
|
/**
|
|
* @enum _SCSI_SENSE_RESPONSE_CODE
|
|
*
|
|
* @brief this enumeration depicts the types of sense data responses as
|
|
* per SPC-3.
|
|
*/
|
|
typedef enum _SCSI_SENSE_RESPONSE_CODE
|
|
{
|
|
SCSI_FIXED_CURRENT_RESPONSE_CODE = 0x70,
|
|
SCSI_FIXED_DEFERRED_RESPONSE_CODE = 0x71,
|
|
SCSI_DESCRIPTOR_CURRENT_RESPONSE_CODE = 0x72,
|
|
SCSI_DESCRIPTOR_DEFERRED_RESPONSE_CODE = 0x73
|
|
|
|
} SCSI_SENSE_RESPONSE_CODE;
|
|
|
|
/**
|
|
* @enum _SCSI_SENSE_DATA_DESCRIPTOR_TYPE
|
|
*
|
|
* @brief this enumeration depicts the types of sense data descriptor as
|
|
* per SPC-4.
|
|
*/
|
|
typedef enum _SCSI_SENSE_DATA_DESCRIPTOR_TYPE
|
|
{
|
|
SCSI_INFORMATION_DESCRIPTOR_TYPE = 0x00,
|
|
SCSI_CMD_SPECIFIC_DESCRIPTOR_TYPE = 0x01,
|
|
SCSI_KEY_SPECIFIC_DESCRIPTOR_TYPE = 0x02,
|
|
SCSI_FIELD_REPLACEABLE_UNIT_DESCRIPTOR_TYPE = 0x03,
|
|
SCSI_STREAM_CMD_DESCRIPTOR_TYPE = 0x04,
|
|
SCSI_BLOCK_DESCRIPTOR_TYPE = 0x05,
|
|
SCSI_OSD_OBJ_IDENTIFICATION_DESCRIPTOR_TYPE = 0x06,
|
|
SCSI_OSC_RESPONSE_INTEGRITY_DESCRIPTOR_TYPE = 0x07,
|
|
SCSI_OSD_ATTR_IDENTIFICATION_DESCRIPTOR_TYPE = 0x08,
|
|
SCSI_ATA_STATUS_RETURN_DESCRIPTOR_TYPE = 0x09,
|
|
SCSI_PROGRESS_INDICATION_DESCRIPTOR_TYPE = 0x0a,
|
|
SCSI_USER_DATA_SEGEMNT_REF_DESCRIPTOR_TYPE = 0x0b
|
|
} SCSI_SENSE_DATA_DESCRIPTOR_TYPE;
|
|
|
|
#define SCSI_CMD_SPECIFIC_DESCRIPTOR_ADDITIONAL_LENGTH 0x0a
|
|
#define SCSI_CMD_SPECIFIC_DESCRIPTOR_LENGTH 0x0c
|
|
#define SCSI_INFORMATION_DESCRIPTOR_ADDITIONAL_LENGTH 0x0a
|
|
#define SCSI_INFORMATION_DESCRIPTOR_LENGTH 0x0c
|
|
#define SCSI_BLOCK_DESCRIPTOR_ADDITIONAL_LENGTH 0x2
|
|
#define SCSI_BLOCK_DESCRIPTOR_LENGTH 0x4
|
|
|
|
#define SCSI_SENSE_DATA_DESC_BIT 0x01
|
|
|
|
// This constant represents the valid bit located in byte 0 of a FIXED
|
|
// format sense data.
|
|
#define SCSI_FIXED_SENSE_DATA_VALID_BIT 0x80
|
|
|
|
#define SCSI_FIXED_SENSE_DATA_BASE_LENGTH 18
|
|
|
|
// This value is used in the DATAPRES field of the SCSI Response IU.
|
|
#define SCSI_RESPONSE_DATA_PRES_SENSE_DATA 0x02
|
|
|
|
/**
|
|
* @name SCSI_SENSE_KEYS
|
|
*
|
|
* These constants delineate all of the SCSI protocol sense key constants
|
|
*/
|
|
/*@{*/
|
|
#define SCSI_SENSE_NO_SENSE 0x00
|
|
#define SCSI_SENSE_RECOVERED_ERROR 0x01
|
|
#define SCSI_SENSE_NOT_READY 0x02
|
|
#define SCSI_SENSE_MEDIUM_ERROR 0x03
|
|
#define SCSI_SENSE_HARDWARE_ERROR 0x04
|
|
#define SCSI_SENSE_ILLEGAL_REQUEST 0x05
|
|
#define SCSI_SENSE_UNIT_ATTENTION 0x06
|
|
#define SCSI_SENSE_DATA_PROTECT 0x07
|
|
#define SCSI_SENSE_BLANK_CHECK 0x08
|
|
#define SCSI_SENSE_VENDOR_SPECIFIC 0x09
|
|
#define SCSI_SENSE_COPY_ABORTED 0x0A
|
|
#define SCSI_SENSE_ABORTED_COMMAND 0x0B
|
|
#define SCSI_SENSE_VOLUME_OVERFLOW 0x0D
|
|
#define SCSI_SENSE_MISCOMPARE 0x0E
|
|
/*@}*/
|
|
|
|
/**
|
|
* @name SCSI_ADDITIONAL_SENSE_CODES
|
|
*
|
|
* These constants delineate all of the SCSI protocol additional sense
|
|
* code constants.
|
|
*/
|
|
/*@{*/
|
|
#define SCSI_ASC_NO_ADDITIONAL_SENSE 0x00
|
|
#define SCSI_ASC_INITIALIZING_COMMAND_REQUIRED 0x04
|
|
#define SCSI_ASC_LUN_SELF_TEST_IN_PROGRESS 0x04
|
|
#define SCSI_ASC_LUN_FORMAT_IN_PROGRESS 0x04
|
|
#define SCSI_ASC_LUN_NOT_RESPOND_TO_SELECTION 0x05
|
|
#define SCSI_ASC_UNRECOVERED_READ_ERROR 0x11
|
|
#define SCSI_ASC_INVALID_COMMAND_OPERATION_CODE 0x20
|
|
#define SCSI_ASC_LBA_OUT_OF_RANGE 0x21
|
|
#define SCSI_ASC_INVALID_FIELD_IN_CDB 0x24
|
|
#define SCSI_ASC_LOGICAL_UNIT_NOT_SUPPORTED 0x25
|
|
#define SCSI_ASC_INVALID_FIELD_IN_PARM_LIST 0x26
|
|
#define SCSI_ASC_WRITE_PROTECTED 0x27
|
|
#define SCSI_ASC_NOT_READY_TO_READY_CHANGE 0x28
|
|
#define SCSI_ASC_MEDIUM_FORMAT_CORRUPTED 0x31
|
|
#define SCSI_ASC_ENCLOSURE_SERVICES_UNAVAILABLE 0x35
|
|
#define SCSI_ASC_SAVING_PARMS_NOT_SUPPORTED 0x39
|
|
#define SCSI_ASC_MEDIUM_NOT_PRESENT 0x3A
|
|
#define SCSI_ASC_INTERNAL_TARGET_FAILURE 0x44
|
|
#define SCSI_ASC_IU_CRC_ERROR_DETECTED 0x47
|
|
#define SCSI_ASC_MEDIUM_REMOVAL_REQUEST 0x5A
|
|
#define SCSI_ASC_COMMAND_SEQUENCE_ERROR 0x2C
|
|
#define SCSI_ASC_MEDIA_LOAD_OR_EJECT_FAILED 0x53
|
|
#define SCSI_ASC_HARDWARE_IMPENDING_FAILURE 0x5D
|
|
#define SCSI_ASC_POWER_STATE_CHANGE 0x5E
|
|
#define SCSI_DIAGNOSTIC_FAILURE_ON_COMPONENT 0x40
|
|
#define SCSI_ASC_LOGICAL_UNIT_FAILED 0x4C
|
|
#define SCSI_ASC_ATA_DEVICE_FEATURE_NOT_ENABLED 0x67
|
|
#define SCSI_ASC_MICROCODE_HAS_CHANGED 0x3F
|
|
/*@}*/
|
|
|
|
/**
|
|
* @name SCSI_ADDITIONAL_SENSE_CODE_QUALIFIERS
|
|
*
|
|
* This enumeration contains all of the used SCSI protocol additional
|
|
* sense code qualifier constants.
|
|
*/
|
|
/*@{*/
|
|
#define SCSI_ASCQ_NO_ADDITIONAL_SENSE 0x00
|
|
#define SCSI_ASCQ_INVALID_FIELD_IN_CDB 0x00
|
|
#define SCSI_ASCQ_INVALID_FIELD_IN_PARM_LIST 0x00
|
|
#define SCSI_ASCQ_LUN_NOT_RESPOND_TO_SELECTION 0x00
|
|
#define SCSI_ASCQ_INTERNAL_TARGET_FAILURE 0x00
|
|
#define SCSI_ASCQ_LBA_OUT_OF_RANGE 0x00
|
|
#define SCSI_ASCQ_MEDIUM_NOT_PRESENT 0x00
|
|
#define SCSI_ASCQ_NOT_READY_TO_READY_CHANGE 0x00
|
|
#define SCSI_ASCQ_WRITE_PROTECTED 0x00
|
|
#define SCSI_ASCQ_UNRECOVERED_READ_ERROR 0x00
|
|
#define SCSI_ASCQ_SAVING_PARMS_NOT_SUPPORTED 0x00
|
|
#define SCSI_ASCQ_INVALID_COMMAND_OPERATION_CODE 0x00
|
|
#define SCSI_ASCQ_MEDIUM_REMOVAL_REQUEST 0x01
|
|
#define SCSI_ASCQ_INITIALIZING_COMMAND_REQUIRED 0x02
|
|
#define SCSI_ASCQ_IU_CRC_ERROR_DETECTED 0x03
|
|
#define SCSI_ASCQ_LUN_FORMAT_IN_PROGRESS 0x04
|
|
#define SCSI_ASCQ_LUN_SELF_TEST_IN_PROGRESS 0x09
|
|
#define SCSI_ASCQ_GENERAL_HARD_DRIVE_FAILURE 0x10
|
|
#define SCSI_ASCQ_IDLE_CONDITION_ACTIVATE_BY_COMMAND 0x03
|
|
#define SCSI_ASCQ_STANDBY_CONDITION_ACTIVATE_BY_COMMAND 0x04
|
|
#define SCSI_ASCQ_POWER_STATE_CHANGE_TO_IDLE 0x42
|
|
#define SCSI_ASCQ_POWER_STATE_CHANGE_TO_STANDBY 0x43
|
|
#define SCSI_ASCQ_ATA_DEVICE_FEATURE_NOT_ENABLED 0x0B
|
|
#define SCSI_ASCQ_UNRECOVERED_READ_ERROR_AUTO_REALLOCATE_FAIL 0x04
|
|
#define SCSI_ASCQ_ATA_PASS_THROUGH_INFORMATION_AVAILABLE 0x1D
|
|
#define SCSI_ASCQ_MICROCODE_HAS_CHANGED 0x01
|
|
/*@}*/
|
|
|
|
/**
|
|
* @name SCSI_STATUS_CODES
|
|
*
|
|
* These constants define all of the used SCSI status values.
|
|
*/
|
|
/*@{*/
|
|
#define SCSI_STATUS_GOOD 0x00
|
|
#define SCSI_STATUS_CHECK_CONDITION 0x02
|
|
#define SCSI_STATUS_CONDITION_MET 0x04
|
|
#define SCSI_STATUS_BUSY 0x08
|
|
#define SCSI_STATUS_TASKFULL 0x28
|
|
#define SCSI_STATUS_ACA 0x30
|
|
#define SCSI_STATUS_ABORT 0x40
|
|
/*@}*/
|
|
|
|
/**
|
|
* @name SCSI_OPERATION_CODES
|
|
*
|
|
* These constants delineate all of the SCSI command/operation codes.
|
|
*/
|
|
/*@{*/
|
|
#define SCSI_INQUIRY 0x12
|
|
#define SCSI_READ_CAPACITY_10 0x25
|
|
#define SCSI_SERVICE_ACTION_IN_16 0x9E
|
|
#define SCSI_TEST_UNIT_READY 0x00
|
|
#define SCSI_START_STOP_UNIT 0x1B
|
|
#define SCSI_SYNCHRONIZE_CACHE_10 0x35
|
|
#define SCSI_SYNCHRONIZE_CACHE_16 0x91
|
|
#define SCSI_REQUEST_SENSE 0x03
|
|
#define SCSI_REPORT_LUNS 0xA0
|
|
#define SCSI_REASSIGN_BLOCKS 0x07
|
|
#define SCSI_READ_6 0x08
|
|
#define SCSI_READ_10 0x28
|
|
#define SCSI_READ_12 0xA8
|
|
#define SCSI_READ_16 0x88
|
|
#define SCSI_WRITE_6 0x0A
|
|
#define SCSI_WRITE_10 0x2A
|
|
#define SCSI_WRITE_12 0xAA
|
|
#define SCSI_WRITE_16 0x8A
|
|
#define SCSI_VERIFY_10 0x2F
|
|
#define SCSI_VERIFY_12 0xAF
|
|
#define SCSI_VERIFY_16 0x8F
|
|
#define SCSI_SEEK_6 0x01
|
|
#define SCSI_SEEK_10 0x02
|
|
#define SCSI_WRITE_VERIFY 0x2E
|
|
#define SCSI_FORMAT_UNIT 0x04
|
|
#define SCSI_READ_BUFFER 0x3C
|
|
#define SCSI_WRITE_BUFFER 0x3B
|
|
#define SCSI_SEND_DIAGNOSTIC 0x1D
|
|
#define SCSI_RECEIVE_DIAGNOSTIC 0x1C
|
|
#define SCSI_MODE_SENSE_6 0x1A
|
|
#define SCSI_MODE_SENSE_10 0x5A
|
|
#define SCSI_MODE_SELECT_6 0x15
|
|
#define SCSI_MODE_SELECT_10 0x55
|
|
#define SCSI_MAINTENANCE_IN 0xA3
|
|
#define SCSI_LOG_SENSE 0x4D
|
|
#define SCSI_LOG_SELECT 0x4C
|
|
#define SCSI_RESERVE_6 0x16
|
|
#define SCSI_RESERVE_10 0x56
|
|
#define SCSI_RELEASE_6 0x17
|
|
#define SCSI_RELEASE_10 0x57
|
|
#define SCSI_ATA_PASSTHRU_12 0xA1
|
|
#define SCSI_ATA_PASSTHRU_16 0x85
|
|
#define SCSI_WRITE_LONG_10 0x3F
|
|
#define SCSI_WRITE_LONG_16 0x9F
|
|
#define SCSI_PERSISTENT_RESERVE_IN 0x5E
|
|
#define SCSI_PERSISTENT_RESERVE_OUT 0x5F
|
|
#define SCSI_SECURITY_PROTOCOL_IN 0xA2
|
|
#define SCSI_SECURITY_PROTOCOL_OUT 0xB5
|
|
#define SCSI_UNMAP 0x42
|
|
#define SCSI_WRITE_AND_VERIFY_10 0x2E
|
|
#define SCSI_WRITE_AND_VERIFY_12 0xAE
|
|
#define SCSI_WRITE_AND_VERIFY_16 0x8E
|
|
/*@}*/
|
|
|
|
/**
|
|
* @name SCSI_SERVICE_ACTION_IN_CODES
|
|
*
|
|
* Service action in operations.
|
|
*/
|
|
/*@{*/
|
|
#define SCSI_SERVICE_ACTION_IN_CODES_READ_CAPACITY_16 0x10
|
|
/*@}*/
|
|
|
|
/**
|
|
*
|
|
* Service action mask.
|
|
*/
|
|
/*@{*/
|
|
#define SCSI_SERVICE_ACTION_MASK 0x1f
|
|
/*@}*/
|
|
|
|
/**
|
|
* @name SCSI_MAINTENANCE_IN_SERVICE_ACTION_CODES
|
|
*
|
|
* MAINTENANCE IN service action codes.
|
|
*/
|
|
/*@{*/
|
|
#define SCSI_REPORT_TASK_MGMT 0x0D
|
|
#define SCSI_REPORT_OP_CODES 0x0C
|
|
/*@}*/
|
|
|
|
/**
|
|
* @name SCSI_MODE_PAGE_CONTROLS
|
|
*
|
|
* These constants delineate all of the used SCSI Mode Page control
|
|
* values.
|
|
*/
|
|
/*@{*/
|
|
#define SCSI_MODE_SENSE_PC_CURRENT 0x0
|
|
#define SCSI_MODE_SENSE_PC_CHANGEABLE 0x1
|
|
#define SCSI_MODE_SENSE_PC_DEFAULT 0x2
|
|
#define SCSI_MODE_SENSE_PC_SAVED 0x3
|
|
/*@}*/
|
|
|
|
#define SCSI_MODE_SENSE_PC_SHIFT 0x06
|
|
#define SCSI_MODE_SENSE_PAGE_CODE_ENABLE 0x3F
|
|
#define SCSI_MODE_SENSE_DBD_ENABLE 0x08
|
|
#define SCSI_MODE_SENSE_LLBAA_ENABLE 0x10
|
|
|
|
#define SCSI_MODE_PAGE_CONTROL_D_SENSE_DISABLE 0x0
|
|
#define SCSI_MODE_PAGE_CONTROL_D_SENSE_ENABLE 0x1
|
|
/**
|
|
* @name SCSI_MODE_PAGE_CODES
|
|
*
|
|
* These constants delineate all of the used SCSI Mode Page codes.
|
|
*/
|
|
/*@{*/
|
|
#define SCSI_MODE_PAGE_READ_WRITE_ERROR 0x01
|
|
#define SCSI_MODE_PAGE_DISCONNECT_RECONNECT 0x02
|
|
#define SCSI_MODE_PAGE_CACHING 0x08
|
|
#define SCSI_MODE_PAGE_CONTROL 0x0A
|
|
#define SCSI_MODE_PAGE_PROTOCOL_SPECIFIC_PORT 0x19
|
|
#define SCSI_MODE_PAGE_POWER_CONDITION 0x1A
|
|
#define SCSI_MODE_PAGE_INFORMATIONAL_EXCP_CONTROL 0x1C
|
|
#define SCSI_MODE_PAGE_ALL_PAGES 0x3F
|
|
/*@}*/
|
|
|
|
#define SCSI_MODE_SENSE_ALL_SUB_PAGES_CODE 0xFF
|
|
#define SCSI_MODE_SENSE_NO_SUB_PAGES_CODE 0x0
|
|
#define SCSI_MODE_SENSE_PROTOCOL_PORT_NUM_SUBPAGES 0x1
|
|
#define SCSI_MODE_PAGE_CACHE_PAGE_WCE_BIT 0x04
|
|
#define SCSI_MODE_PAGE_CACHE_PAGE_DRA_BIT 0x20
|
|
#define SCSI_MODE_PAGE_DEXCPT_ENABLE 0x08
|
|
#define SCSI_MODE_SENSE_HEADER_FUA_ENABLE 0x10
|
|
#define SCSI_MODE_PAGE_POWER_CONDITION_STANDBY 0x1
|
|
#define SCSI_MODE_PAGE_POWER_CONDITION_IDLE 0x2
|
|
|
|
#define SCSI_MODE_SENSE_6_HEADER_LENGTH 4
|
|
#define SCSI_MODE_SENSE_10_HEADER_LENGTH 8
|
|
#define SCSI_MODE_SENSE_STD_BLOCK_DESCRIPTOR_LENGTH 8
|
|
#define SCSI_MODE_SENSE_LLBA_BLOCK_DESCRIPTOR_LENGTH 16
|
|
|
|
#define SCSI_MODE_PAGE_INFORMATIONAL_EXCP_DXCPT_ENABLE 0x08
|
|
#define SCSI_MODE_PAGE_19_SAS_ID 0x6
|
|
#define SCSI_MODE_PAGE_19_SUB1_PAGE_NUM 0x1
|
|
#define SCSI_MODE_PAGE_19_SUB1_PC 0x59
|
|
|
|
#define SCSI_MODE_HEADER_MEDIUM_TYPE_SBC 0x00
|
|
|
|
//Mode Select constrains related masks value
|
|
#define SCSI_MODE_SELECT_PF_BIT 0x1
|
|
#define SCSI_MODE_SELECT_PF_MASK 0x10
|
|
#define SCSI_MODE_SELECT_MODE_PAGE_MRIE_BYTE 0x6
|
|
#define SCSI_MODE_SELECT_MODE_PAGE_MRIE_MASK 0x0F
|
|
#define SCSI_MODE_SELECT_MODE_PAGE_SPF_MASK 0x40
|
|
#define SCSI_MODE_SELECT_MODE_PAGE_01_AWRE_MASK 0x80
|
|
#define SCSI_MODE_SELECT_MODE_PAGE_01_ARRE_MASK 0x40
|
|
#define SCSI_MODE_SELECT_MODE_PAGE_01_RC_ERBITS_MASK 0x1F
|
|
#define SCSI_MODE_SELECT_MODE_PAGE_08_FSW_LBCSS_NVDIS 0xC1
|
|
#define SCSI_MODE_SELECT_MODE_PAGE_1C_PERF_TEST 0x84
|
|
#define SCSI_MODE_SELECT_MODE_PAGE_0A_TST_TMF_RLEC 0xF1
|
|
#define SCSI_MODE_SELECT_MODE_PAGE_0A_MODIFIER 0xE0
|
|
#define SCSI_MODE_SELECT_MODE_PAGE_0A_UA_SWP 0x38
|
|
#define SCSI_MODE_SELECT_MODE_PAGE_0A_TAS_AUTO 0x47
|
|
#define SCSI_MODE_SELECT_MODE_PAGE_D_SENSE 0x4
|
|
|
|
#define SCSI_CONTROL_BYTE_NACA_BIT_ENABLE 0x04
|
|
#define SCSI_MOVE_FUA_BIT_ENABLE 0x08
|
|
#define SCSI_READ_CAPACITY_PMI_BIT_ENABLE 0x01
|
|
#define SCSI_READ_CAPACITY_10_DATA_LENGTH 8
|
|
#define SCSI_READ_CAPACITY_16_DATA_LENGTH 32
|
|
|
|
// Inquiry constants
|
|
#define SCSI_INQUIRY_EVPD_ENABLE 0x01
|
|
#define SCSI_INQUIRY_PAGE_CODE_OFFSET 0x02
|
|
#define SCSI_INQUIRY_SUPPORTED_PAGES_PAGE 0x00
|
|
#define SCSI_INQUIRY_UNIT_SERIAL_NUM_PAGE 0x80
|
|
#define SCSI_INQUIRY_DEVICE_ID_PAGE 0x83
|
|
#define SCSI_INQUIRY_ATA_INFORMATION_PAGE 0x89
|
|
#define SCSI_INQUIRY_BLOCK_DEVICE_PAGE 0xB1
|
|
#define SCSI_INQUIRY_BLOCK_DEVICE_LENGTH 0x3C
|
|
#define SCSI_INQUIRY_STANDARD_ALLOCATION_LENGTH 0x24 //36
|
|
|
|
#define SCSI_REQUEST_SENSE_ALLOCATION_LENGTH 0xFC //252
|
|
|
|
/** Defines the log page codes that are use in gathing Smart data
|
|
*/
|
|
#define SCSI_LOG_PAGE_SUPPORTED_PAGES 0x00
|
|
#define SCSI_LOG_PAGE_INFORMATION_EXCEPTION 0x2F
|
|
#define SCSI_LOG_PAGE_SELF_TEST 0x10
|
|
|
|
/**
|
|
* @name SCSI_INQUIRY_VPD
|
|
*
|
|
* The following are constants used with vital product data inquiry pages.
|
|
* Values are already shifted into the proper nibble location.
|
|
*/
|
|
/*@{*/
|
|
#define SCSI_PIV_ENABLE 0x80
|
|
#define SCSI_LUN_ASSOCIATION 0x00
|
|
#define SCSI_TARGET_PORT_ASSOCIATION 0x10
|
|
|
|
#define SCSI_VEN_UNIQUE_IDENTIFIER_TYPE 0x00
|
|
#define SCSI_NAA_IDENTIFIER_TYPE 0x03
|
|
|
|
#define SCSI_T10_IDENTIFIER_TYPE 0x01
|
|
#define SCSI_BINARY_CODE_SET 0x01
|
|
#define SCSI_ASCII_CODE_SET 0x02
|
|
#define SCSI_FC_PROTOCOL_IDENTIFIER 0x00
|
|
#define SCSI_SAS_PROTOCOL_IDENTIFIER 0x60
|
|
/*@}*/
|
|
|
|
#define SCSI_VERIFY_BYTCHK_ENABLED 0x02
|
|
|
|
#define SCSI_SYNCHRONIZE_CACHE_IMMED_ENABLED 0x02
|
|
/**
|
|
* @name SCSI_START_STOP_UNIT_POWER_CONDITION_CODES
|
|
*
|
|
* The following are SCSI Start Stop Unit command Power Condition codes.
|
|
*/
|
|
/*@{*/
|
|
#define SCSI_START_STOP_UNIT_POWER_CONDITION_START_VALID 0x0
|
|
#define SCSI_START_STOP_UNIT_POWER_CONDITION_ACTIVE 0x1
|
|
#define SCSI_START_STOP_UNIT_POWER_CONDITION_IDLE 0x2
|
|
#define SCSI_START_STOP_UNIT_POWER_CONDITION_STANDBY 0x3
|
|
#define SCSI_START_STOP_UNIT_POWER_CONDITION_LU_CONTROL 0x7
|
|
#define SCSI_START_STOP_UNIT_POWER_CONDITION_FORCE_S_CONTROL 0xB
|
|
/*@}*/
|
|
|
|
#define SCSI_START_STOP_UNIT_IMMED_MASK 0x1
|
|
#define SCSI_START_STOP_UNIT_IMMED_SHIFT 0
|
|
|
|
#define SCSI_START_STOP_UNIT_START_BIT_MASK 0x1
|
|
#define SCSI_START_STOP_UNIT_START_BIT_SHIFT 0
|
|
|
|
#define SCSI_START_STOP_UNIT_LOEJ_BIT_MASK 0x2
|
|
#define SCSI_START_STOP_UNIT_LOEJ_BIT_SHIFT 1
|
|
|
|
#define SCSI_START_STOP_UNIT_NO_FLUSH_MASK 0x4
|
|
#define SCSI_START_STOP_UNIT_NO_FLUSH_SHIFT 2
|
|
|
|
#define SCSI_START_STOP_UNIT_POWER_CONDITION_MODIFIER_MASK 0xF
|
|
#define SCSI_START_STOP_UNIT_POWER_CONDITION_MODIFIER_SHIFT 0
|
|
|
|
#define SCSI_START_STOP_UNIT_POWER_CONDITION_MASK 0xF0
|
|
#define SCSI_START_STOP_UNIT_POWER_CONDITION_SHIFT 4
|
|
|
|
#define SCSI_LOG_SENSE_PC_FIELD_MASK 0xC0
|
|
#define SCSI_LOG_SENSE_PC_FIELD_SHIFT 6
|
|
|
|
#define SCSI_LOG_SENSE_PAGE_CODE_FIELD_MASK 0x3F
|
|
#define SCSI_LOG_SENSE_PAGE_CODE_FIELD_SHIFT 0
|
|
|
|
/**
|
|
* @name MRIE - Method of reporting informational exceptions codes
|
|
*/
|
|
/*@{*/
|
|
#define NO_REPORTING_INFO_EXCEPTION_CONDITION 0x0
|
|
#define ASYNCHRONOUS_EVENT_REPORTING 0x1
|
|
#define ESTABLISH_UNIT_ATTENTION_CONDITION 0x2
|
|
#define CONDITIONALLY_GENERATE_RECOVERED_ERROR 0x3
|
|
#define UNCONDITIONALLY_GENERATE_RECOVERED_ERROR 0x4
|
|
#define GENERATE_NO_SENSE 0x5
|
|
#define REPORT_INFO_EXCEPTION_CONDITION_ON_REQUEST 0x6
|
|
/*@}*/
|
|
|
|
#define SCSI_INFORMATION_EXCEPTION_DEXCPT_BIT 0x08
|
|
|
|
//Reassign Blocks masks
|
|
#define SCSI_REASSIGN_BLOCKS_LONGLBA_BIT 0x02
|
|
#define SCSI_REASSIGN_BLOCKS_LONGLIST_BIT 0x01
|
|
|
|
#endif // _SCSI_H_
|
|
|