d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
4cbba6ae24
freebsd-dev/sys/net80211/ieee80211_sta.c
Adrian Chadd f1481c8d3b [net80211] Migrate HT/legacy protection mode and preamble calculation to per-VAP flags 
The later firmware devices (including iwn!) support multiple configuration
contexts for a lot of things, leaving it up to the firmware to decide
which channel and vap is active.  This allows for things like off-channel
p2p sta/ap operation and other weird things.

However, net80211 is still focused on a "net80211 drives all" when it comes to driving
the NIC, and as part of this history a lot of these options are global and not per-VAP.
This is fine when net80211 drives things and all VAPs share a single channel - these
parameters importantly really reflect the state of the channel! - but it will increasingly
be not fine when we start supporting more weird configurations and more recent NICs.
Yeah, recent like iwn/iwm.

Anyway - so, migrate all of the HT protection, legacy protection and preamble
stuff to be per-VAP.  The global flags are still there; they're now calculated
in a deferred taskqueue that mirrors the old behaviour.  Firmware based drivers
which have per-VAP configuration of these parameters can now just listen to the
per-VAP options.

What do I mean by per-channel? Well, the above configuration parameters really
are about interoperation with other devices on the same channel. Eg, HT protection
mode will flip to legacy/mixed if it hears ANY BSS that supports non-HT stations or
indicates it has non-HT stations associated.  So, these flags really should be
per-channel rather than per-VAP, and then for things like "do i need short preamble
or long preamble?" turn into a "do I need it for this current operating channel".
Then any VAP using it can query the channel that it's on, reflecting the real
required state.

This patch does none of the above paragraph just yet.

I'm also cheating a bit - I'm currently not using separate taskqueues for
the beacon updates and the per-VAP configuration updates.  I can always further
split it later if I need to but I didn't think it was SUPER important here.

So:

* Create vap taskqueue entries for ERP/protection, HT protection and short/long
  preamble;
* Migrate the HT station count, short/long slot station count, etc - into per-VAP
  variables rather than global;
* Fix a bug with my WME work from a while ago which made it per-VAP - do the WME
  beacon update /after/ the WME update taskqueue runs, not before;
* Any time the HT protmode configuration changes or the ERP protection mode
  config changes - schedule the task, which will call the driver without the
  net80211 lock held and all correctly serialised;
* Use the global flags for beacon IEs and VAP flags for probe responses and
  other IE situations.

The primary consumer of this is ath10k.  iwn could use it when sending RXON,
but we don't support IBSS or AP modes on it yet, and I'm not yet sure whether
it's required in STA mode (ie whether the firmware parses beacons to change
protection mode or whether we need to.)

Tested:

* AR9280, STA/AP
* AR9380, DWDS STA+STA/AP
* ath10k work, STA/AP
* Intel 6235, STA
* Various rtwn / run NICs, DWDS STA and STA configurations
2020-07-01 00:23:49 +00:00

2052 lines
60 KiB
C
Raw Blame History

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 2007-2008 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
#ifdef __FreeBSD__
__FBSDID("$FreeBSD$");
#endif
/*
* IEEE 802.11 Station mode support.
*/
#include "opt_inet.h"
#include "opt_wlan.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/mbuf.h>
#include <sys/malloc.h>
#include <sys/kernel.h>
#include <sys/socket.h>
#include <sys/sockio.h>
#include <sys/endian.h>
#include <sys/errno.h>
#include <sys/proc.h>
#include <sys/sysctl.h>
#include <net/if.h>
#include <net/if_media.h>
#include <net/if_llc.h>
#include <net/if_dl.h>
#include <net/if_var.h>
#include <net/ethernet.h>
#include <net/bpf.h>
#include <net80211/ieee80211_var.h>
#include <net80211/ieee80211_sta.h>
#include <net80211/ieee80211_input.h>
#ifdef IEEE80211_SUPPORT_SUPERG
#include <net80211/ieee80211_superg.h>
#endif
#include <net80211/ieee80211_ratectl.h>
#include <net80211/ieee80211_sta.h>
#include <net80211/ieee80211_vht.h>
#define IEEE80211_RATE2MBS(r) (((r) & IEEE80211_RATE_VAL) / 2)
static void sta_vattach(struct ieee80211vap *);
static void sta_beacon_miss(struct ieee80211vap *);
static int sta_newstate(struct ieee80211vap *, enum ieee80211_state, int);
static int sta_input(struct ieee80211_node *, struct mbuf *,
const struct ieee80211_rx_stats *, int, int);
static void sta_recv_mgmt(struct ieee80211_node *, struct mbuf *,
int subtype, const struct ieee80211_rx_stats *, int rssi, int nf);
static void sta_recv_ctl(struct ieee80211_node *, struct mbuf *, int subtype);
void
ieee80211_sta_attach(struct ieee80211com *ic)
{
ic->ic_vattach[IEEE80211_M_STA] = sta_vattach;
}
void
ieee80211_sta_detach(struct ieee80211com *ic)
{
}
static void
sta_vdetach(struct ieee80211vap *vap)
{
}
static void
sta_vattach(struct ieee80211vap *vap)
{
vap->iv_newstate = sta_newstate;
vap->iv_input = sta_input;
vap->iv_recv_mgmt = sta_recv_mgmt;
vap->iv_recv_ctl = sta_recv_ctl;
vap->iv_opdetach = sta_vdetach;
vap->iv_bmiss = sta_beacon_miss;
}
/*
* Handle a beacon miss event. The common code filters out
* spurious events that can happen when scanning and/or before
* reaching RUN state.
*/
static void
sta_beacon_miss(struct ieee80211vap *vap)
{
struct ieee80211com *ic = vap->iv_ic;
IEEE80211_LOCK_ASSERT(ic);
KASSERT((ic->ic_flags & IEEE80211_F_SCAN) == 0, ("scanning"));
KASSERT(vap->iv_state >= IEEE80211_S_RUN,
("wrong state %s", ieee80211_state_name[vap->iv_state]));
IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE | IEEE80211_MSG_DEBUG,
"beacon miss, mode %s state %s\n",
ieee80211_opmode_name[vap->iv_opmode],
ieee80211_state_name[vap->iv_state]);
if (vap->iv_state == IEEE80211_S_CSA) {
/*
* A Channel Switch is pending; assume we missed the
* beacon that would've completed the process and just
* force the switch. If we made a mistake we'll not
* find the AP on the new channel and fall back to a
* normal scan.
*/
ieee80211_csa_completeswitch(ic);
return;
}
if (++vap->iv_bmiss_count < vap->iv_bmiss_max) {
/*
* Send a directed probe req before falling back to a
* scan; if we receive a response ic_bmiss_count will
* be reset. Some cards mistakenly report beacon miss
* so this avoids the expensive scan if the ap is
* still there.
*/
ieee80211_send_probereq(vap->iv_bss, vap->iv_myaddr,
vap->iv_bss->ni_bssid, vap->iv_bss->ni_bssid,
vap->iv_bss->ni_essid, vap->iv_bss->ni_esslen);
return;
}
callout_stop(&vap->iv_swbmiss);
vap->iv_bmiss_count = 0;
vap->iv_stats.is_beacon_miss++;
if (vap->iv_roaming == IEEE80211_ROAMING_AUTO) {
#ifdef IEEE80211_SUPPORT_SUPERG
/*
* If we receive a beacon miss interrupt when using
* dynamic turbo, attempt to switch modes before
* reassociating.
*/
if (IEEE80211_ATH_CAP(vap, vap->iv_bss, IEEE80211_NODE_TURBOP))
ieee80211_dturbo_switch(vap,
ic->ic_bsschan->ic_flags ^ IEEE80211_CHAN_TURBO);
#endif
/*
* Try to reassociate before scanning for a new ap.
*/
ieee80211_new_state(vap, IEEE80211_S_ASSOC, 1);
} else {
/*
* Somebody else is controlling state changes (e.g.
* a user-mode app) don't do anything that would
* confuse them; just drop into scan mode so they'll
* notified of the state change and given control.
*/
ieee80211_new_state(vap, IEEE80211_S_SCAN, 0);
}
}
/*
* Handle deauth with reason. We retry only for
* the cases where we might succeed. Otherwise
* we downgrade the ap and scan.
*/
static void
sta_authretry(struct ieee80211vap *vap, struct ieee80211_node *ni, int reason)
{
switch (reason) {
case IEEE80211_STATUS_SUCCESS: /* NB: MLME assoc */
case IEEE80211_STATUS_TIMEOUT:
case IEEE80211_REASON_ASSOC_EXPIRE:
case IEEE80211_REASON_NOT_AUTHED:
case IEEE80211_REASON_NOT_ASSOCED:
case IEEE80211_REASON_ASSOC_LEAVE:
case IEEE80211_REASON_ASSOC_NOT_AUTHED:
IEEE80211_SEND_MGMT(ni, IEEE80211_FC0_SUBTYPE_AUTH, 1);
break;
default:
ieee80211_scan_assoc_fail(vap, vap->iv_bss->ni_macaddr, reason);
if (vap->iv_roaming == IEEE80211_ROAMING_AUTO)
ieee80211_check_scan_current(vap);
break;
}
}
static void
sta_swbmiss_start(struct ieee80211vap *vap)
{
if (vap->iv_flags_ext & IEEE80211_FEXT_SWBMISS) {
/*
* Start s/w beacon miss timer for devices w/o
* hardware support. We fudge a bit here since
* we're doing this in software.
*/
vap->iv_swbmiss_period = IEEE80211_TU_TO_TICKS(
2 * vap->iv_bmissthreshold * vap->iv_bss->ni_intval);
vap->iv_swbmiss_count = 0;
callout_reset(&vap->iv_swbmiss, vap->iv_swbmiss_period,
ieee80211_swbmiss, vap);
}
}
/*
* IEEE80211_M_STA vap state machine handler.
* This routine handles the main states in the 802.11 protocol.
*/
static int
sta_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg)
{
struct ieee80211com *ic = vap->iv_ic;
struct ieee80211_node *ni;
enum ieee80211_state ostate;
IEEE80211_LOCK_ASSERT(ic);
ostate = vap->iv_state;
IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE, "%s: %s -> %s (%d)\n",
__func__, ieee80211_state_name[ostate],
ieee80211_state_name[nstate], arg);
vap->iv_state = nstate; /* state transition */
callout_stop(&vap->iv_mgtsend); /* XXX callout_drain */
if (ostate != IEEE80211_S_SCAN)
ieee80211_cancel_scan(vap); /* background scan */
ni = vap->iv_bss; /* NB: no reference held */
if (vap->iv_flags_ext & IEEE80211_FEXT_SWBMISS)
callout_stop(&vap->iv_swbmiss);
switch (nstate) {
case IEEE80211_S_INIT:
switch (ostate) {
case IEEE80211_S_SLEEP:
/* XXX wakeup */
/* XXX driver hook to wakeup the hardware? */
case IEEE80211_S_RUN:
IEEE80211_SEND_MGMT(ni,
IEEE80211_FC0_SUBTYPE_DISASSOC,
IEEE80211_REASON_ASSOC_LEAVE);
ieee80211_sta_leave(ni);
break;
case IEEE80211_S_ASSOC:
IEEE80211_SEND_MGMT(ni,
IEEE80211_FC0_SUBTYPE_DEAUTH,
IEEE80211_REASON_AUTH_LEAVE);
break;
case IEEE80211_S_SCAN:
ieee80211_cancel_scan(vap);
break;
default:
break;
}
if (ostate != IEEE80211_S_INIT) {
/* NB: optimize INIT -> INIT case */
ieee80211_reset_bss(vap);
}
if (vap->iv_auth->ia_detach != NULL)
vap->iv_auth->ia_detach(vap);
break;
case IEEE80211_S_SCAN:
switch (ostate) {
case IEEE80211_S_INIT:
/*
* Initiate a scan. We can come here as a result
* of an IEEE80211_IOC_SCAN_REQ too in which case
* the vap will be marked with IEEE80211_FEXT_SCANREQ
* and the scan request parameters will be present
* in iv_scanreq. Otherwise we do the default.
*/
if (vap->iv_flags_ext & IEEE80211_FEXT_SCANREQ) {
ieee80211_check_scan(vap,
vap->iv_scanreq_flags,
vap->iv_scanreq_duration,
vap->iv_scanreq_mindwell,
vap->iv_scanreq_maxdwell,
vap->iv_scanreq_nssid, vap->iv_scanreq_ssid);
vap->iv_flags_ext &= ~IEEE80211_FEXT_SCANREQ;
} else
ieee80211_check_scan_current(vap);
break;
case IEEE80211_S_SCAN:
case IEEE80211_S_AUTH:
case IEEE80211_S_ASSOC:
/*
* These can happen either because of a timeout
* on an assoc/auth response or because of a
* change in state that requires a reset. For
* the former we're called with a non-zero arg
* that is the cause for the failure; pass this
* to the scan code so it can update state.
* Otherwise trigger a new scan unless we're in
* manual roaming mode in which case an application
* must issue an explicit scan request.
*/
if (arg != 0)
ieee80211_scan_assoc_fail(vap,
vap->iv_bss->ni_macaddr, arg);
if (vap->iv_roaming == IEEE80211_ROAMING_AUTO)
ieee80211_check_scan_current(vap);
break;
case IEEE80211_S_SLEEP: /* beacon miss */
/*
* XXX if in sleep we need to wakeup the hardware.
*/
/* FALLTHROUGH */
case IEEE80211_S_RUN: /* beacon miss */
/*
* Beacon miss. Notify user space and if not
* under control of a user application (roaming
* manual) kick off a scan to re-connect.
*/
ieee80211_sta_leave(ni);
if (vap->iv_roaming == IEEE80211_ROAMING_AUTO)
ieee80211_check_scan_current(vap);
break;
default:
goto invalid;
}
break;
case IEEE80211_S_AUTH:
switch (ostate) {
case IEEE80211_S_INIT:
case IEEE80211_S_SCAN:
IEEE80211_SEND_MGMT(ni,
IEEE80211_FC0_SUBTYPE_AUTH, 1);
break;
case IEEE80211_S_AUTH:
case IEEE80211_S_ASSOC:
switch (arg & 0xff) {
case IEEE80211_FC0_SUBTYPE_AUTH:
/* ??? */
IEEE80211_SEND_MGMT(ni,
IEEE80211_FC0_SUBTYPE_AUTH, 2);
break;
case IEEE80211_FC0_SUBTYPE_DEAUTH:
sta_authretry(vap, ni, arg>>8);
break;
}
break;
case IEEE80211_S_SLEEP:
case IEEE80211_S_RUN:
switch (arg & 0xff) {
case IEEE80211_FC0_SUBTYPE_AUTH:
IEEE80211_SEND_MGMT(ni,
IEEE80211_FC0_SUBTYPE_AUTH, 2);
vap->iv_state = IEEE80211_S_RUN; /* stay RUN */
break;
case IEEE80211_FC0_SUBTYPE_DEAUTH:
ieee80211_sta_leave(ni);
if (vap->iv_roaming == IEEE80211_ROAMING_AUTO) {
/* try to reauth */
IEEE80211_SEND_MGMT(ni,
IEEE80211_FC0_SUBTYPE_AUTH, 1);
}
break;
}
break;
default:
goto invalid;
}
break;
case IEEE80211_S_ASSOC:
switch (ostate) {
case IEEE80211_S_AUTH:
case IEEE80211_S_ASSOC:
IEEE80211_SEND_MGMT(ni,
IEEE80211_FC0_SUBTYPE_ASSOC_REQ, 0);
break;
case IEEE80211_S_SLEEP: /* cannot happen */
case IEEE80211_S_RUN:
ieee80211_sta_leave(ni);
if (vap->iv_roaming == IEEE80211_ROAMING_AUTO) {
IEEE80211_SEND_MGMT(ni, arg ?
IEEE80211_FC0_SUBTYPE_REASSOC_REQ :
IEEE80211_FC0_SUBTYPE_ASSOC_REQ, 0);
}
break;
default:
goto invalid;
}
break;
case IEEE80211_S_RUN:
if (vap->iv_flags & IEEE80211_F_WPA) {
/* XXX validate prerequisites */
}
switch (ostate) {
case IEEE80211_S_RUN:
case IEEE80211_S_CSA:
break;
case IEEE80211_S_AUTH: /* when join is done in fw */
case IEEE80211_S_ASSOC:
#ifdef IEEE80211_DEBUG
if (ieee80211_msg_debug(vap)) {
ieee80211_note(vap, "%s with %s ssid ",
(vap->iv_opmode == IEEE80211_M_STA ?
"associated" : "synchronized"),
ether_sprintf(ni->ni_bssid));
ieee80211_print_essid(vap->iv_bss->ni_essid,
ni->ni_esslen);
/* XXX MCS/HT */
printf(" channel %d start %uMb\n",
ieee80211_chan2ieee(ic, ic->ic_curchan),
IEEE80211_RATE2MBS(ni->ni_txrate));
}
#endif
ieee80211_scan_assoc_success(vap, ni->ni_macaddr);
ieee80211_notify_node_join(ni,
arg == IEEE80211_FC0_SUBTYPE_ASSOC_RESP);
break;
case IEEE80211_S_SLEEP:
/* Wake up from sleep */
vap->iv_sta_ps(vap, 0);
break;
default:
goto invalid;
}
ieee80211_sync_curchan(ic);
if (ostate != IEEE80211_S_RUN)
sta_swbmiss_start(vap);
/*
* When 802.1x is not in use mark the port authorized
* at this point so traffic can flow.
*/
if (ni->ni_authmode != IEEE80211_AUTH_8021X)
ieee80211_node_authorize(ni);
/*
* Fake association when joining an existing bss.
*
* Don't do this if we're doing SLEEP->RUN.
*/
if (ic->ic_newassoc != NULL && ostate != IEEE80211_S_SLEEP)
ic->ic_newassoc(vap->iv_bss, (ostate != IEEE80211_S_RUN));
break;
case IEEE80211_S_CSA:
if (ostate != IEEE80211_S_RUN)
goto invalid;
break;
case IEEE80211_S_SLEEP:
sta_swbmiss_start(vap);
vap->iv_sta_ps(vap, 1);
break;
default:
invalid:
IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE,
"%s: unexpected state transition %s -> %s\n", __func__,
ieee80211_state_name[ostate], ieee80211_state_name[nstate]);
break;
}
return 0;
}
/*
* Return non-zero if the frame is an echo of a multicast
* frame sent by ourself. The dir is known to be DSTODS.
*/
static __inline int
isdstods_mcastecho(struct ieee80211vap *vap, const struct ieee80211_frame *wh)
{
#define QWH4(wh) ((const struct ieee80211_qosframe_addr4 *)wh)
#define WH4(wh) ((const struct ieee80211_frame_addr4 *)wh)
const uint8_t *sa;
KASSERT(vap->iv_opmode == IEEE80211_M_STA, ("wrong mode"));
if (!IEEE80211_IS_MULTICAST(wh->i_addr3))
return 0;
sa = IEEE80211_QOS_HAS_SEQ(wh) ? QWH4(wh)->i_addr4 : WH4(wh)->i_addr4;
return IEEE80211_ADDR_EQ(sa, vap->iv_myaddr);
#undef WH4
#undef QWH4
}
/*
* Return non-zero if the frame is an echo of a multicast
* frame sent by ourself. The dir is known to be FROMDS.
*/
static __inline int
isfromds_mcastecho(struct ieee80211vap *vap, const struct ieee80211_frame *wh)
{
KASSERT(vap->iv_opmode == IEEE80211_M_STA, ("wrong mode"));
if (!IEEE80211_IS_MULTICAST(wh->i_addr1))
return 0;
return IEEE80211_ADDR_EQ(wh->i_addr3, vap->iv_myaddr);
}
/*
* Decide if a received management frame should be
* printed when debugging is enabled. This filters some
* of the less interesting frames that come frequently
* (e.g. beacons).
*/
static __inline int
doprint(struct ieee80211vap *vap, int subtype)
{
switch (subtype) {
case IEEE80211_FC0_SUBTYPE_BEACON:
return (vap->iv_ic->ic_flags & IEEE80211_F_SCAN);
case IEEE80211_FC0_SUBTYPE_PROBE_REQ:
return 0;
}
return 1;
}
/*
* Process a received frame. The node associated with the sender
* should be supplied. If nothing was found in the node table then
* the caller is assumed to supply a reference to iv_bss instead.
* The RSSI and a timestamp are also supplied. The RSSI data is used
* during AP scanning to select a AP to associate with; it can have
* any units so long as values have consistent units and higher values
* mean ``better signal''. The receive timestamp is currently not used
* by the 802.11 layer.
*/
static int
sta_input(struct ieee80211_node *ni, struct mbuf *m,
const struct ieee80211_rx_stats *rxs, int rssi, int nf)
{
struct ieee80211vap *vap = ni->ni_vap;
struct ieee80211com *ic = ni->ni_ic;
struct ifnet *ifp = vap->iv_ifp;
struct ieee80211_frame *wh;
struct ieee80211_key *key;
struct ether_header *eh;
int hdrspace, need_tap = 1; /* mbuf need to be tapped. */
uint8_t dir, type, subtype, qos;
uint8_t *bssid;
int is_hw_decrypted = 0;
int has_decrypted = 0;
/*
* Some devices do hardware decryption all the way through
* to pretending the frame wasn't encrypted in the first place.
* So, tag it appropriately so it isn't discarded inappropriately.
*/
if ((rxs != NULL) && (rxs->c_pktflags & IEEE80211_RX_F_DECRYPTED))
is_hw_decrypted = 1;
if (m->m_flags & M_AMPDU_MPDU) {
/*
* Fastpath for A-MPDU reorder q resubmission. Frames
* w/ M_AMPDU_MPDU marked have already passed through
* here but were received out of order and been held on
* the reorder queue. When resubmitted they are marked
* with the M_AMPDU_MPDU flag and we can bypass most of
* the normal processing.
*/
wh = mtod(m, struct ieee80211_frame *);
type = IEEE80211_FC0_TYPE_DATA;
dir = wh->i_fc[1] & IEEE80211_FC1_DIR_MASK;
subtype = IEEE80211_FC0_SUBTYPE_QOS;
hdrspace = ieee80211_hdrspace(ic, wh); /* XXX optimize? */
goto resubmit_ampdu;
}
KASSERT(ni != NULL, ("null node"));
ni->ni_inact = ni->ni_inact_reload;
type = -1; /* undefined */
if (m->m_pkthdr.len < sizeof(struct ieee80211_frame_min)) {
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY,
ni->ni_macaddr, NULL,
"too short (1): len %u", m->m_pkthdr.len);
vap->iv_stats.is_rx_tooshort++;
goto out;
}
/*
* Bit of a cheat here, we use a pointer for a 3-address
* frame format but don't reference fields past outside
* ieee80211_frame_min w/o first validating the data is
* present.
*/
wh = mtod(m, struct ieee80211_frame *);
if ((wh->i_fc[0] & IEEE80211_FC0_VERSION_MASK) !=
IEEE80211_FC0_VERSION_0) {
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY,
ni->ni_macaddr, NULL, "wrong version, fc %02x:%02x",
wh->i_fc[0], wh->i_fc[1]);
vap->iv_stats.is_rx_badversion++;
goto err;
}
dir = wh->i_fc[1] & IEEE80211_FC1_DIR_MASK;
type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK;
subtype = wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK;
if ((ic->ic_flags & IEEE80211_F_SCAN) == 0) {
bssid = wh->i_addr2;
if (!IEEE80211_ADDR_EQ(bssid, ni->ni_bssid)) {
/* not interested in */
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT,
bssid, NULL, "%s", "not to bss");
vap->iv_stats.is_rx_wrongbss++;
goto out;
}
/*
* Some devices may be in a promiscuous mode
* where they receive frames for multiple station
* addresses.
*
* If we receive a data frame that isn't
* destined to our VAP MAC, drop it.
*
* XXX TODO: This is only enforced when not scanning;
* XXX it assumes a software-driven scan will put the NIC
* XXX into a "no data frames" mode before setting this
* XXX flag. Otherwise it may be possible that we'll still
* XXX process data frames whilst scanning.
*/
if ((! IEEE80211_IS_MULTICAST(wh->i_addr1))
&& (! IEEE80211_ADDR_EQ(wh->i_addr1, IF_LLADDR(ifp)))) {
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT,
bssid, NULL, "not to cur sta: lladdr=%6D, addr1=%6D",
IF_LLADDR(ifp), ":", wh->i_addr1, ":");
vap->iv_stats.is_rx_wrongbss++;
goto out;
}
IEEE80211_RSSI_LPF(ni->ni_avgrssi, rssi);
ni->ni_noise = nf;
if ( IEEE80211_HAS_SEQ(type, subtype) &&
!IEEE80211_IS_MULTICAST(wh->i_addr1)) {
uint8_t tid = ieee80211_gettid(wh);
if (IEEE80211_QOS_HAS_SEQ(wh) &&
TID_TO_WME_AC(tid) >= WME_AC_VI)
ic->ic_wme.wme_hipri_traffic++;
if (! ieee80211_check_rxseq(ni, wh, bssid, rxs))
goto out;
}
}
switch (type) {
case IEEE80211_FC0_TYPE_DATA:
hdrspace = ieee80211_hdrspace(ic, wh);
if (m->m_len < hdrspace &&
(m = m_pullup(m, hdrspace)) == NULL) {
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY,
ni->ni_macaddr, NULL,
"data too short: expecting %u", hdrspace);
vap->iv_stats.is_rx_tooshort++;
goto out; /* XXX */
}
/*
* Handle A-MPDU re-ordering. If the frame is to be
* processed directly then ieee80211_ampdu_reorder
* will return 0; otherwise it has consumed the mbuf
* and we should do nothing more with it.
*/
if ((m->m_flags & M_AMPDU) &&
(dir == IEEE80211_FC1_DIR_FROMDS ||
dir == IEEE80211_FC1_DIR_DSTODS) &&
ieee80211_ampdu_reorder(ni, m, rxs) != 0) {
m = NULL;
goto out;
}
resubmit_ampdu:
if (dir == IEEE80211_FC1_DIR_FROMDS) {
if ((ifp->if_flags & IFF_SIMPLEX) &&
isfromds_mcastecho(vap, wh)) {
/*
* In IEEE802.11 network, multicast
* packets sent from "me" are broadcast
* from the AP; silently discard for
* SIMPLEX interface.
*/
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
wh, "data", "%s", "multicast echo");
vap->iv_stats.is_rx_mcastecho++;
goto out;
}
if ((vap->iv_flags & IEEE80211_F_DWDS) &&
IEEE80211_IS_MULTICAST(wh->i_addr1)) {
/*
* DWDS sta's must drop 3-address mcast frames
* as they will be sent separately as a 4-addr
* frame. Accepting the 3-addr frame will
* confuse the bridge into thinking the sending
* sta is located at the end of WDS link.
*/
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh,
"3-address data", "%s", "DWDS enabled");
vap->iv_stats.is_rx_mcastecho++;
goto out;
}
} else if (dir == IEEE80211_FC1_DIR_DSTODS) {
if ((vap->iv_flags & IEEE80211_F_DWDS) == 0) {
IEEE80211_DISCARD(vap,
IEEE80211_MSG_INPUT, wh, "4-address data",
"%s", "DWDS not enabled");
vap->iv_stats.is_rx_wrongdir++;
goto out;
}
if ((ifp->if_flags & IFF_SIMPLEX) &&
isdstods_mcastecho(vap, wh)) {
/*
* In IEEE802.11 network, multicast
* packets sent from "me" are broadcast
* from the AP; silently discard for
* SIMPLEX interface.
*/
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh,
"4-address data", "%s", "multicast echo");
vap->iv_stats.is_rx_mcastecho++;
goto out;
}
} else {
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh,
"data", "incorrect dir 0x%x", dir);
vap->iv_stats.is_rx_wrongdir++;
goto out;
}
/*
* Handle privacy requirements for hardware decryption
* devices.
*
* For those devices, a handful of things happen.
*
* + If IV has been stripped, then we can't run
* ieee80211_crypto_decap() - none of the key
* + If MIC has been stripped, we can't validate
* MIC here.
* + If MIC fails, then we need to communicate a
* MIC failure up to the stack - but we don't know
* which key was used.
*/
/*
* Handle privacy requirements. Note that we
* must not be preempted from here until after
* we (potentially) call ieee80211_crypto_demic;
* otherwise we may violate assumptions in the
* crypto cipher modules used to do delayed update
* of replay sequence numbers.
*/
if (is_hw_decrypted || wh->i_fc[1] & IEEE80211_FC1_PROTECTED) {
if ((vap->iv_flags & IEEE80211_F_PRIVACY) == 0) {
/*
* Discard encrypted frames when privacy is off.
*/
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
wh, "WEP", "%s", "PRIVACY off");
vap->iv_stats.is_rx_noprivacy++;
IEEE80211_NODE_STAT(ni, rx_noprivacy);
goto out;
}
if (ieee80211_crypto_decap(ni, m, hdrspace, &key) == 0) {
/* NB: stats+msgs handled in crypto_decap */
IEEE80211_NODE_STAT(ni, rx_wepfail);
goto out;
}
wh = mtod(m, struct ieee80211_frame *);
wh->i_fc[1] &= ~IEEE80211_FC1_PROTECTED;
has_decrypted = 1;
} else {
/* XXX M_WEP and IEEE80211_F_PRIVACY */
key = NULL;
}
/*
* Save QoS bits for use below--before we strip the header.
*/
if (subtype == IEEE80211_FC0_SUBTYPE_QOS)
qos = ieee80211_getqos(wh)[0];
else
qos = 0;
/*
* Next up, any fragmentation.
*/
if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) {
m = ieee80211_defrag(ni, m, hdrspace);
if (m == NULL) {
/* Fragment dropped or frame not complete yet */
goto out;
}
}
wh = NULL; /* no longer valid, catch any uses */
/*
* Next strip any MSDU crypto bits.
*
* Note: we can't do MIC stripping/verification if the
* upper layer has stripped it. We have to check MIC
* ourselves. So, key may be NULL, but we have to check
* the RX status.
*/
if (!ieee80211_crypto_demic(vap, key, m, 0)) {
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT,
ni->ni_macaddr, "data", "%s", "demic error");
vap->iv_stats.is_rx_demicfail++;
IEEE80211_NODE_STAT(ni, rx_demicfail);
goto out;
}
/* copy to listener after decrypt */
if (ieee80211_radiotap_active_vap(vap))
ieee80211_radiotap_rx(vap, m);
need_tap = 0;
/*
* Finally, strip the 802.11 header.
*/
m = ieee80211_decap(vap, m, hdrspace);
if (m == NULL) {
/* XXX mask bit to check for both */
/* don't count Null data frames as errors */
if (subtype == IEEE80211_FC0_SUBTYPE_NODATA ||
subtype == IEEE80211_FC0_SUBTYPE_QOS_NULL)
goto out;
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT,
ni->ni_macaddr, "data", "%s", "decap error");
vap->iv_stats.is_rx_decap++;
IEEE80211_NODE_STAT(ni, rx_decap);
goto err;
}
eh = mtod(m, struct ether_header *);
if (!ieee80211_node_is_authorized(ni)) {
/*
* Deny any non-PAE frames received prior to
* authorization. For open/shared-key
* authentication the port is mark authorized
* after authentication completes. For 802.1x
* the port is not marked authorized by the
* authenticator until the handshake has completed.
*/
if (eh->ether_type != htons(ETHERTYPE_PAE)) {
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT,
eh->ether_shost, "data",
"unauthorized port: ether type 0x%x len %u",
eh->ether_type, m->m_pkthdr.len);
vap->iv_stats.is_rx_unauth++;
IEEE80211_NODE_STAT(ni, rx_unauth);
goto err;
}
} else {
/*
* When denying unencrypted frames, discard
* any non-PAE frames received without encryption.
*/
if ((vap->iv_flags & IEEE80211_F_DROPUNENC) &&
((has_decrypted == 0) && (m->m_flags & M_WEP) == 0) &&
(is_hw_decrypted == 0) &&
eh->ether_type != htons(ETHERTYPE_PAE)) {
/*
* Drop unencrypted frames.
*/
vap->iv_stats.is_rx_unencrypted++;
IEEE80211_NODE_STAT(ni, rx_unencrypted);
goto out;
}
}
/* XXX require HT? */
if (qos & IEEE80211_QOS_AMSDU) {
m = ieee80211_decap_amsdu(ni, m);
if (m == NULL)
return IEEE80211_FC0_TYPE_DATA;
} else {
#ifdef IEEE80211_SUPPORT_SUPERG
m = ieee80211_decap_fastframe(vap, ni, m);
if (m == NULL)
return IEEE80211_FC0_TYPE_DATA;
#endif
}
ieee80211_deliver_data(vap, ni, m);
return IEEE80211_FC0_TYPE_DATA;
case IEEE80211_FC0_TYPE_MGT:
vap->iv_stats.is_rx_mgmt++;
IEEE80211_NODE_STAT(ni, rx_mgmt);
if (dir != IEEE80211_FC1_DIR_NODS) {
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
wh, "data", "incorrect dir 0x%x", dir);
vap->iv_stats.is_rx_wrongdir++;
goto err;
}
if (m->m_pkthdr.len < sizeof(struct ieee80211_frame)) {
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY,
ni->ni_macaddr, "mgt", "too short: len %u",
m->m_pkthdr.len);
vap->iv_stats.is_rx_tooshort++;
goto out;
}
#ifdef IEEE80211_DEBUG
if ((ieee80211_msg_debug(vap) && doprint(vap, subtype)) ||
ieee80211_msg_dumppkts(vap)) {
if_printf(ifp, "received %s from %s rssi %d\n",
ieee80211_mgt_subtype_name(subtype),
ether_sprintf(wh->i_addr2), rssi);
}
#endif
/*
* Note: See above for hardware offload privacy requirements.
* It also applies here.
*/
/*
* Again, having encrypted flag set check would be good, but
* then we have to also handle crypto_decap() like above.
*/
if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) {
if (subtype != IEEE80211_FC0_SUBTYPE_AUTH) {
/*
* Only shared key auth frames with a challenge
* should be encrypted, discard all others.
*/
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
wh, ieee80211_mgt_subtype_name(subtype),
"%s", "WEP set but not permitted");
vap->iv_stats.is_rx_mgtdiscard++; /* XXX */
goto out;
}
if ((vap->iv_flags & IEEE80211_F_PRIVACY) == 0) {
/*
* Discard encrypted frames when privacy is off.
*/
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
wh, "mgt", "%s", "WEP set but PRIVACY off");
vap->iv_stats.is_rx_noprivacy++;
goto out;
}
hdrspace = ieee80211_hdrspace(ic, wh);
/*
* Again, if IV/MIC was stripped, then this whole
* setup will fail. That's going to need some poking.
*/
if (ieee80211_crypto_decap(ni, m, hdrspace, &key) == 0) {
/* NB: stats+msgs handled in crypto_decap */
goto out;
}
has_decrypted = 1;
wh = mtod(m, struct ieee80211_frame *);
wh->i_fc[1] &= ~IEEE80211_FC1_PROTECTED;
}
vap->iv_recv_mgmt(ni, m, subtype, rxs, rssi, nf);
goto out;
case IEEE80211_FC0_TYPE_CTL:
vap->iv_stats.is_rx_ctl++;
IEEE80211_NODE_STAT(ni, rx_ctrl);
vap->iv_recv_ctl(ni, m, subtype);
goto out;
default:
IEEE80211_DISCARD(vap, IEEE80211_MSG_ANY,
wh, NULL, "bad frame type 0x%x", type);
/* should not come here */
break;
}
err:
if_inc_counter(ifp, IFCOUNTER_IERRORS, 1);
out:
if (m != NULL) {
if (need_tap && ieee80211_radiotap_active_vap(vap))
ieee80211_radiotap_rx(vap, m);
m_freem(m);
}
return type;
}
static void
sta_auth_open(struct ieee80211_node *ni, struct ieee80211_frame *wh,
int rssi, int nf, uint16_t seq, uint16_t status)
{
struct ieee80211vap *vap = ni->ni_vap;
if (ni->ni_authmode == IEEE80211_AUTH_SHARED) {
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_AUTH,
ni->ni_macaddr, "open auth",
"bad sta auth mode %u", ni->ni_authmode);
vap->iv_stats.is_rx_bad_auth++; /* XXX */
return;
}
if (vap->iv_state != IEEE80211_S_AUTH ||
seq != IEEE80211_AUTH_OPEN_RESPONSE) {
vap->iv_stats.is_rx_bad_auth++;
return;
}
if (status != 0) {
IEEE80211_NOTE(vap, IEEE80211_MSG_DEBUG | IEEE80211_MSG_AUTH,
ni, "open auth failed (reason %d)", status);
vap->iv_stats.is_rx_auth_fail++;
vap->iv_stats.is_rx_authfail_code = status;
ieee80211_new_state(vap, IEEE80211_S_SCAN,
IEEE80211_SCAN_FAIL_STATUS);
} else
ieee80211_new_state(vap, IEEE80211_S_ASSOC, 0);
}
static void
sta_auth_shared(struct ieee80211_node *ni, struct ieee80211_frame *wh,
uint8_t *frm, uint8_t *efrm, int rssi, int nf,
uint16_t seq, uint16_t status)
{
struct ieee80211vap *vap = ni->ni_vap;
uint8_t *challenge;
/*
* NB: this can happen as we allow pre-shared key
* authentication to be enabled w/o wep being turned
* on so that configuration of these can be done
* in any order. It may be better to enforce the
* ordering in which case this check would just be
* for sanity/consistency.
*/
if ((vap->iv_flags & IEEE80211_F_PRIVACY) == 0) {
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_AUTH,
ni->ni_macaddr, "shared key auth",
"%s", " PRIVACY is disabled");
goto bad;
}
/*
* Pre-shared key authentication is evil; accept
* it only if explicitly configured (it is supported
* mainly for compatibility with clients like OS X).
*/
if (ni->ni_authmode != IEEE80211_AUTH_AUTO &&
ni->ni_authmode != IEEE80211_AUTH_SHARED) {
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_AUTH,
ni->ni_macaddr, "shared key auth",
"bad sta auth mode %u", ni->ni_authmode);
vap->iv_stats.is_rx_bad_auth++; /* XXX maybe a unique error? */
goto bad;
}
challenge = NULL;
if (frm + 1 < efrm) {
if ((frm[1] + 2) > (efrm - frm)) {
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_AUTH,
ni->ni_macaddr, "shared key auth",
"ie %d/%d too long",
frm[0], (frm[1] + 2) - (efrm - frm));
vap->iv_stats.is_rx_bad_auth++;
goto bad;
}
if (*frm == IEEE80211_ELEMID_CHALLENGE)
challenge = frm;
frm += frm[1] + 2;
}
switch (seq) {
case IEEE80211_AUTH_SHARED_CHALLENGE:
case IEEE80211_AUTH_SHARED_RESPONSE:
if (challenge == NULL) {
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_AUTH,
ni->ni_macaddr, "shared key auth",
"%s", "no challenge");
vap->iv_stats.is_rx_bad_auth++;
goto bad;
}
if (challenge[1] != IEEE80211_CHALLENGE_LEN) {
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_AUTH,
ni->ni_macaddr, "shared key auth",
"bad challenge len %d", challenge[1]);
vap->iv_stats.is_rx_bad_auth++;
goto bad;
}
default:
break;
}
if (vap->iv_state != IEEE80211_S_AUTH)
return;
switch (seq) {
case IEEE80211_AUTH_SHARED_PASS:
if (ni->ni_challenge != NULL) {
IEEE80211_FREE(ni->ni_challenge, M_80211_NODE);
ni->ni_challenge = NULL;
}
if (status != 0) {
IEEE80211_NOTE_FRAME(vap,
IEEE80211_MSG_DEBUG | IEEE80211_MSG_AUTH, wh,
"shared key auth failed (reason %d)", status);
vap->iv_stats.is_rx_auth_fail++;
vap->iv_stats.is_rx_authfail_code = status;
return;
}
ieee80211_new_state(vap, IEEE80211_S_ASSOC, 0);
break;
case IEEE80211_AUTH_SHARED_CHALLENGE:
if (!ieee80211_alloc_challenge(ni))
return;
/* XXX could optimize by passing recvd challenge */
memcpy(ni->ni_challenge, &challenge[2], challenge[1]);
IEEE80211_SEND_MGMT(ni,
IEEE80211_FC0_SUBTYPE_AUTH, seq + 1);
break;
default:
IEEE80211_DISCARD(vap, IEEE80211_MSG_AUTH,
wh, "shared key auth", "bad seq %d", seq);
vap->iv_stats.is_rx_bad_auth++;
return;
}
return;
bad:
/*
* Kick the state machine. This short-circuits
* using the mgt frame timeout to trigger the
* state transition.
*/
if (vap->iv_state == IEEE80211_S_AUTH)
ieee80211_new_state(vap, IEEE80211_S_SCAN,
IEEE80211_SCAN_FAIL_STATUS);
}
/*
* Parse the WME IE for QoS and U-APSD information.
*
* Returns -1 if the IE isn't found, 1 if it's found.
*/
int
ieee80211_parse_wmeie(uint8_t *frm, const struct ieee80211_frame *wh,
struct ieee80211_node *ni)
{
u_int len = frm[1];
ni->ni_uapsd = 0;
if (len < sizeof(struct ieee80211_wme_param)-2) {
IEEE80211_DISCARD_IE(ni->ni_vap,
IEEE80211_MSG_ELEMID | IEEE80211_MSG_WME,
wh, "WME", "too short, len %u", len);
return -1;
}
ni->ni_uapsd = frm[WME_CAPINFO_IE_OFFSET];
IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_POWER | IEEE80211_MSG_ASSOC,
ni, "U-APSD settings from STA: 0x%02x", ni->ni_uapsd);
return 1;
}
int
ieee80211_parse_wmeparams(struct ieee80211vap *vap, uint8_t *frm,
const struct ieee80211_frame *wh, uint8_t *qosinfo)
{
#define MS(_v, _f) (((_v) & _f) >> _f##_S)
struct ieee80211_wme_state *wme = &vap->iv_ic->ic_wme;
u_int len = frm[1], qosinfo_count;
int i;
*qosinfo = 0;
if (len < sizeof(struct ieee80211_wme_param)-2) {
IEEE80211_DISCARD_IE(vap,
IEEE80211_MSG_ELEMID | IEEE80211_MSG_WME,
wh, "WME", "too short, len %u", len);
return -1;
}
*qosinfo = frm[__offsetof(struct ieee80211_wme_param, param_qosInfo)];
qosinfo_count = *qosinfo & WME_QOSINFO_COUNT;
/* XXX do proper check for wraparound */
if (qosinfo_count == wme->wme_wmeChanParams.cap_info)
return 0;
frm += __offsetof(struct ieee80211_wme_param, params_acParams);
for (i = 0; i < WME_NUM_AC; i++) {
struct wmeParams *wmep =
&wme->wme_wmeChanParams.cap_wmeParams[i];
/* NB: ACI not used */
wmep->wmep_acm = MS(frm[0], WME_PARAM_ACM);
wmep->wmep_aifsn = MS(frm[0], WME_PARAM_AIFSN);
wmep->wmep_logcwmin = MS(frm[1], WME_PARAM_LOGCWMIN);
wmep->wmep_logcwmax = MS(frm[1], WME_PARAM_LOGCWMAX);
wmep->wmep_txopLimit = le16dec(frm+2);
IEEE80211_DPRINTF(vap, IEEE80211_MSG_WME,
"%s: WME: %d: acm=%d aifsn=%d logcwmin=%d logcwmax=%d txopLimit=%d\n",
__func__,
i,
wmep->wmep_acm,
wmep->wmep_aifsn,
wmep->wmep_logcwmin,
wmep->wmep_logcwmax,
wmep->wmep_txopLimit);
frm += 4;
}
wme->wme_wmeChanParams.cap_info = qosinfo_count;
return 1;
#undef MS
}
/*
* Process 11h Channel Switch Announcement (CSA) ie. If this
* is the first CSA then initiate the switch. Otherwise we
* track state and trigger completion and/or cancel of the switch.
* XXX should be public for IBSS use
*/
static void
ieee80211_parse_csaparams(struct ieee80211vap *vap, uint8_t *frm,
const struct ieee80211_frame *wh)
{
struct ieee80211com *ic = vap->iv_ic;
const struct ieee80211_csa_ie *csa =
(const struct ieee80211_csa_ie *) frm;
KASSERT(vap->iv_state >= IEEE80211_S_RUN,
("state %s", ieee80211_state_name[vap->iv_state]));
if (csa->csa_mode > 1) {
IEEE80211_DISCARD_IE(vap,
IEEE80211_MSG_ELEMID | IEEE80211_MSG_DOTH,
wh, "CSA", "invalid mode %u", csa->csa_mode);
return;
}
IEEE80211_LOCK(ic);
if ((ic->ic_flags & IEEE80211_F_CSAPENDING) == 0) {
/*
* Convert the channel number to a channel reference. We
* try first to preserve turbo attribute of the current
* channel then fallback. Note this will not work if the
* CSA specifies a channel that requires a band switch (e.g.
* 11a => 11g). This is intentional as 11h is defined only
* for 5GHz/11a and because the switch does not involve a
* reassociation, protocol state (capabilities, negotated
* rates, etc) may/will be wrong.
*/
struct ieee80211_channel *c =
ieee80211_find_channel_byieee(ic, csa->csa_newchan,
(ic->ic_bsschan->ic_flags & IEEE80211_CHAN_ALLTURBO));
if (c == NULL) {
c = ieee80211_find_channel_byieee(ic,
csa->csa_newchan,
(ic->ic_bsschan->ic_flags & IEEE80211_CHAN_ALL));
if (c == NULL) {
IEEE80211_DISCARD_IE(vap,
IEEE80211_MSG_ELEMID | IEEE80211_MSG_DOTH,
wh, "CSA", "invalid channel %u",
csa->csa_newchan);
goto done;
}
}
#if IEEE80211_CSA_COUNT_MIN > 0
if (csa->csa_count < IEEE80211_CSA_COUNT_MIN) {
/*
* Require at least IEEE80211_CSA_COUNT_MIN count to
* reduce the risk of being redirected by a fabricated
* CSA. If a valid CSA is dropped we'll still get a
* beacon miss when the AP leaves the channel so we'll
* eventually follow to the new channel.
*
* NOTE: this violates the 11h spec that states that
* count may be any value and if 0 then a switch
* should happen asap.
*/
IEEE80211_DISCARD_IE(vap,
IEEE80211_MSG_ELEMID | IEEE80211_MSG_DOTH,
wh, "CSA", "count %u too small, must be >= %u",
csa->csa_count, IEEE80211_CSA_COUNT_MIN);
goto done;
}
#endif
ieee80211_csa_startswitch(ic, c, csa->csa_mode, csa->csa_count);
} else {
/*
* Validate this ie against the initial CSA. We require
* mode and channel not change and the count must be
* monotonically decreasing. This may be pointless and
* canceling the switch as a result may be too paranoid but
* in the worst case if we drop out of CSA because of this
* and the AP does move then we'll just end up taking a
* beacon miss and scan to find the AP.
*
* XXX may want <= on count as we also process ProbeResp
* frames and those may come in w/ the same count as the
* previous beacon; but doing so leaves us open to a stuck
* count until we add a dead-man timer
*/
if (!(csa->csa_count < ic->ic_csa_count &&
csa->csa_mode == ic->ic_csa_mode &&
csa->csa_newchan == ieee80211_chan2ieee(ic, ic->ic_csa_newchan))) {
IEEE80211_NOTE_FRAME(vap, IEEE80211_MSG_DOTH, wh,
"CSA ie mismatch, initial ie <%d,%d,%d>, "
"this ie <%d,%d,%d>", ic->ic_csa_mode,
ic->ic_csa_newchan, ic->ic_csa_count,
csa->csa_mode, csa->csa_newchan, csa->csa_count);
ieee80211_csa_cancelswitch(ic);
} else {
if (csa->csa_count <= 1)
ieee80211_csa_completeswitch(ic);
else
ic->ic_csa_count = csa->csa_count;
}
}
done:
IEEE80211_UNLOCK(ic);
}
/*
* Return non-zero if a background scan may be continued:
* o bg scan is active
* o no channel switch is pending
* o there has not been any traffic recently
* o no full-offload scan support (no need for explicitly continuing scan then)
*
* Note we do not check if there is an administrative enable;
* this is only done to start the scan. We assume that any
* change in state will be accompanied by a request to cancel
* active scans which will otherwise cause this test to fail.
*/
static __inline int
contbgscan(struct ieee80211vap *vap)
{
struct ieee80211com *ic = vap->iv_ic;
return ((ic->ic_flags_ext & IEEE80211_FEXT_BGSCAN) &&
(ic->ic_flags & IEEE80211_F_CSAPENDING) == 0 &&
!(vap->iv_flags_ext & IEEE80211_FEXT_SCAN_OFFLOAD) &&
vap->iv_state == IEEE80211_S_RUN && /* XXX? */
ieee80211_time_after(ticks, ic->ic_lastdata + vap->iv_bgscanidle));
}
/*
* Return non-zero if a backgrond scan may be started:
* o bg scanning is administratively enabled
* o no channel switch is pending
* o we are not boosted on a dynamic turbo channel
* o there has not been a scan recently
* o there has not been any traffic recently (don't check if full-offload scan)
*/
static __inline int
startbgscan(struct ieee80211vap *vap)
{
struct ieee80211com *ic = vap->iv_ic;
return ((vap->iv_flags & IEEE80211_F_BGSCAN) &&
(ic->ic_flags & IEEE80211_F_CSAPENDING) == 0 &&
#ifdef IEEE80211_SUPPORT_SUPERG
!IEEE80211_IS_CHAN_DTURBO(ic->ic_curchan) &&
#endif
ieee80211_time_after(ticks, ic->ic_lastscan + vap->iv_bgscanintvl) &&
((vap->iv_flags_ext & IEEE80211_FEXT_SCAN_OFFLOAD) ||
ieee80211_time_after(ticks, ic->ic_lastdata + vap->iv_bgscanidle)));
}
#ifdef notyet
/*
* Compare two quiet IEs and return if they are equivalent.
*
* The tbttcount isnt checked - that's not part of the configuration.
*/
static int
compare_quiet_ie(const struct ieee80211_quiet_ie *q1,
const struct ieee80211_quiet_ie *q2)
{
if (q1->period != q2->period)
return (0);
if (le16dec(&q1->duration) != le16dec(&q2->duration))
return (0);
if (le16dec(&q1->offset) != le16dec(&q2->offset))
return (0);
return (1);
}
#endif
static void
sta_recv_mgmt(struct ieee80211_node *ni, struct mbuf *m0, int subtype,
const struct ieee80211_rx_stats *rxs,
int rssi, int nf)
{
#define ISREASSOC(_st) ((_st) == IEEE80211_FC0_SUBTYPE_REASSOC_RESP)
struct ieee80211vap *vap = ni->ni_vap;
struct ieee80211com *ic = ni->ni_ic;
struct ieee80211_channel *rxchan = ic->ic_curchan;
struct ieee80211_frame *wh;
int ht_state_change = 0, do_ht = 0;
uint8_t *frm, *efrm;
uint8_t *rates, *xrates, *wme, *htcap, *htinfo;
uint8_t *vhtcap, *vhtopmode;
uint8_t rate;
uint8_t qosinfo;
wh = mtod(m0, struct ieee80211_frame *);
frm = (uint8_t *)&wh[1];
efrm = mtod(m0, uint8_t *) + m0->m_len;
switch (subtype) {
case IEEE80211_FC0_SUBTYPE_PROBE_RESP:
case IEEE80211_FC0_SUBTYPE_BEACON: {
struct ieee80211_scanparams scan;
struct ieee80211_channel *c;
/*
* We process beacon/probe response frames:
* o when scanning, or
* o station mode when associated (to collect state
* updates such as 802.11g slot time)
* Frames otherwise received are discarded.
*/
if (!((ic->ic_flags & IEEE80211_F_SCAN) || ni->ni_associd)) {
vap->iv_stats.is_rx_mgtdiscard++;
return;
}
/* Override RX channel as appropriate */
if (rxs != NULL) {
c = ieee80211_lookup_channel_rxstatus(vap, rxs);
if (c != NULL)
rxchan = c;
}
/* XXX probe response in sta mode when !scanning? */
if (ieee80211_parse_beacon(ni, m0, rxchan, &scan) != 0) {
if (! (ic->ic_flags & IEEE80211_F_SCAN))
vap->iv_stats.is_beacon_bad++;
return;
}
/*
* Count frame now that we know it's to be processed.
*/
if (subtype == IEEE80211_FC0_SUBTYPE_BEACON) {
vap->iv_stats.is_rx_beacon++; /* XXX remove */
IEEE80211_NODE_STAT(ni, rx_beacons);
} else
IEEE80211_NODE_STAT(ni, rx_proberesp);
/*
* When operating in station mode, check for state updates.
* Be careful to ignore beacons received while doing a
* background scan. We consider only 11g/WMM stuff right now.
*/
if (ni->ni_associd != 0 &&
((ic->ic_flags & IEEE80211_F_SCAN) == 0 ||
IEEE80211_ADDR_EQ(wh->i_addr2, ni->ni_bssid))) {
/* record tsf of last beacon */
memcpy(ni->ni_tstamp.data, scan.tstamp,
sizeof(ni->ni_tstamp));
/* count beacon frame for s/w bmiss handling */
vap->iv_swbmiss_count++;
vap->iv_bmiss_count = 0;
if (ni->ni_erp != scan.erp) {
IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_ASSOC,
wh->i_addr2,
"erp change: was 0x%x, now 0x%x",
ni->ni_erp, scan.erp);
if (IEEE80211_IS_CHAN_ANYG(ic->ic_curchan) &&
(ni->ni_erp & IEEE80211_ERP_USE_PROTECTION))
vap->iv_flags |= IEEE80211_F_USEPROT;
else
vap->iv_flags &= ~IEEE80211_F_USEPROT;
ni->ni_erp = scan.erp;
/* XXX statistic */
/* driver notification */
ieee80211_vap_update_erp_protmode(vap);
}
if ((ni->ni_capinfo ^ scan.capinfo) & IEEE80211_CAPINFO_SHORT_SLOTTIME) {
IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_ASSOC,
wh->i_addr2,
"capabilities change: was 0x%x, now 0x%x",
ni->ni_capinfo, scan.capinfo);
/*
* NB: we assume short preamble doesn't
* change dynamically
*/
ieee80211_vap_set_shortslottime(vap,
IEEE80211_IS_CHAN_A(ic->ic_bsschan) ||
(scan.capinfo & IEEE80211_CAPINFO_SHORT_SLOTTIME));
ni->ni_capinfo = (ni->ni_capinfo &~ IEEE80211_CAPINFO_SHORT_SLOTTIME)
| (scan.capinfo & IEEE80211_CAPINFO_SHORT_SLOTTIME);
/* XXX statistic */
}
if (scan.wme != NULL &&
(ni->ni_flags & IEEE80211_NODE_QOS)) {
int _retval;
if ((_retval = ieee80211_parse_wmeparams(vap,
scan.wme, wh, &qosinfo)) >= 0) {
if (qosinfo & WME_CAPINFO_UAPSD_EN)
ni->ni_flags |=
IEEE80211_NODE_UAPSD;
if (_retval > 0)
ieee80211_wme_updateparams(vap);
}
} else
ni->ni_flags &= ~IEEE80211_NODE_UAPSD;
#ifdef IEEE80211_SUPPORT_SUPERG
if (scan.ath != NULL)
ieee80211_parse_athparams(ni, scan.ath, wh);
#endif
if (scan.htcap != NULL && scan.htinfo != NULL &&
(vap->iv_flags_ht & IEEE80211_FHT_HT)) {
/* XXX state changes? */
ieee80211_ht_updateparams(ni,
scan.htcap, scan.htinfo);
do_ht = 1;
}
if (scan.vhtcap != NULL && scan.vhtopmode != NULL &&
(vap->iv_flags_vht & IEEE80211_FVHT_VHT)) {
/* XXX state changes? */
ieee80211_vht_updateparams(ni,
scan.vhtcap, scan.vhtopmode);
do_ht = 1;
}
if (do_ht) {
if (ieee80211_ht_updateparams_final(ni,
scan.htcap, scan.htinfo))
ht_state_change = 1;
}
/*
* If we have a quiet time IE then report it up to
* the driver.
*
* Otherwise, inform the driver that the quiet time
* IE has disappeared - only do that once rather than
* spamming it each time.
*/
if (scan.quiet) {
ic->ic_set_quiet(ni, scan.quiet);
ni->ni_quiet_ie_set = 1;
memcpy(&ni->ni_quiet_ie, scan.quiet,
sizeof(struct ieee80211_quiet_ie));
} else {
if (ni->ni_quiet_ie_set == 1)
ic->ic_set_quiet(ni, NULL);
ni->ni_quiet_ie_set = 0;
bzero(&ni->ni_quiet_ie,
sizeof(struct ieee80211_quiet_ie));
}
if (scan.tim != NULL) {
struct ieee80211_tim_ie *tim =
(struct ieee80211_tim_ie *) scan.tim;
/*
* XXX Check/debug this code; see if it's about
* the right time to force the VAP awake if we
* receive a frame destined for us?
*/
int aid = IEEE80211_AID(ni->ni_associd);
int ix = aid / NBBY;
int min = tim->tim_bitctl &~ 1;
int max = tim->tim_len + min - 4;
int tim_ucast = 0, tim_mcast = 0;
/*
* Only do this for unicast traffic in the TIM
* The multicast traffic notification for
* the scan notification stuff should occur
* differently.
*/
if (min <= ix && ix <= max &&
isset(tim->tim_bitmap - min, aid)) {
tim_ucast = 1;
}
/*
* Do a separate notification
* for the multicast bit being set.
*/
if (tim->tim_bitctl & 1) {
tim_mcast = 1;
}
/*
* If the TIM indicates there's traffic for
* us then get us out of STA mode powersave.
*/
if (tim_ucast == 1) {
/*
* Wake us out of SLEEP state if we're
* in it; and if we're doing bgscan
* then wake us out of STA powersave.
*/
ieee80211_sta_tim_notify(vap, 1);
/*
* This is preventing us from
* continuing a bgscan; because it
* tricks the contbgscan()
* routine to think there's always
* traffic for us.
*
* I think we need both an RX and
* TX ic_lastdata field.
*/
ic->ic_lastdata = ticks;
}
ni->ni_dtim_count = tim->tim_count;
ni->ni_dtim_period = tim->tim_period;
}
if (scan.csa != NULL &&
(vap->iv_flags & IEEE80211_F_DOTH))
ieee80211_parse_csaparams(vap, scan.csa, wh);
else if (ic->ic_flags & IEEE80211_F_CSAPENDING) {
/*
* No CSA ie or 11h disabled, but a channel
* switch is pending; drop out so we aren't
* stuck in CSA state. If the AP really is
* moving we'll get a beacon miss and scan.
*/
IEEE80211_LOCK(ic);
ieee80211_csa_cancelswitch(ic);
IEEE80211_UNLOCK(ic);
}
/*
* If scanning, pass the info to the scan module.
* Otherwise, check if it's the right time to do
* a background scan. Background scanning must
* be enabled and we must not be operating in the
* turbo phase of dynamic turbo mode. Then,
* it's been a while since the last background
* scan and if no data frames have come through
* recently, kick off a scan. Note that this
* is the mechanism by which a background scan
* is started _and_ continued each time we
* return on-channel to receive a beacon from
* our ap.
*/
if (ic->ic_flags & IEEE80211_F_SCAN) {
ieee80211_add_scan(vap, rxchan,
&scan, wh, subtype, rssi, nf);
} else if (contbgscan(vap)) {
ieee80211_bg_scan(vap, 0);
} else if (startbgscan(vap)) {
vap->iv_stats.is_scan_bg++;
#if 0
/* wakeup if we are sleeing */
ieee80211_set_pwrsave(vap, 0);
#endif
ieee80211_bg_scan(vap, 0);
}
/*
* Put the station to sleep if we haven't seen
* traffic in a while.
*/
IEEE80211_LOCK(ic);
ieee80211_sta_ps_timer_check(vap);
IEEE80211_UNLOCK(ic);
/*
* If we've had a channel width change (eg HT20<->HT40)
* then schedule a delayed driver notification.
*/
if (ht_state_change)
ieee80211_update_chw(ic);
return;
}
/*
* If scanning, just pass information to the scan module.
*/
if (ic->ic_flags & IEEE80211_F_SCAN) {
if (ic->ic_flags_ext & IEEE80211_FEXT_PROBECHAN) {
/*
* Actively scanning a channel marked passive;
* send a probe request now that we know there
* is 802.11 traffic present.
*
* XXX check if the beacon we recv'd gives
* us what we need and suppress the probe req
*/
ieee80211_probe_curchan(vap, 1);
ic->ic_flags_ext &= ~IEEE80211_FEXT_PROBECHAN;
}
ieee80211_add_scan(vap, rxchan, &scan, wh,
subtype, rssi, nf);
return;
}
break;
}
case IEEE80211_FC0_SUBTYPE_AUTH: {
uint16_t algo, seq, status;
/*
* auth frame format
* [2] algorithm
* [2] sequence
* [2] status
* [tlv*] challenge
*/
IEEE80211_VERIFY_LENGTH(efrm - frm, 6, return);
algo = le16toh(*(uint16_t *)frm);
seq = le16toh(*(uint16_t *)(frm + 2));
status = le16toh(*(uint16_t *)(frm + 4));
IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_AUTH, wh->i_addr2,
"recv auth frame with algorithm %d seq %d", algo, seq);
if (vap->iv_flags & IEEE80211_F_COUNTERM) {
IEEE80211_DISCARD(vap,
IEEE80211_MSG_AUTH | IEEE80211_MSG_CRYPTO,
wh, "auth", "%s", "TKIP countermeasures enabled");
vap->iv_stats.is_rx_auth_countermeasures++;
if (vap->iv_opmode == IEEE80211_M_HOSTAP) {
ieee80211_send_error(ni, wh->i_addr2,
IEEE80211_FC0_SUBTYPE_AUTH,
IEEE80211_REASON_MIC_FAILURE);
}
return;
}
if (algo == IEEE80211_AUTH_ALG_SHARED)
sta_auth_shared(ni, wh, frm + 6, efrm, rssi, nf,
seq, status);
else if (algo == IEEE80211_AUTH_ALG_OPEN)
sta_auth_open(ni, wh, rssi, nf, seq, status);
else {
IEEE80211_DISCARD(vap, IEEE80211_MSG_ANY,
wh, "auth", "unsupported alg %d", algo);
vap->iv_stats.is_rx_auth_unsupported++;
return;
}
break;
}
case IEEE80211_FC0_SUBTYPE_ASSOC_RESP:
case IEEE80211_FC0_SUBTYPE_REASSOC_RESP: {
uint16_t capinfo, associd;
uint16_t status;
if (vap->iv_state != IEEE80211_S_ASSOC) {
vap->iv_stats.is_rx_mgtdiscard++;
return;
}
/*
* asresp frame format
* [2] capability information
* [2] status
* [2] association ID
* [tlv] supported rates
* [tlv] extended supported rates
* [tlv] WME
* [tlv] HT capabilities
* [tlv] HT info
*/
IEEE80211_VERIFY_LENGTH(efrm - frm, 6, return);
ni = vap->iv_bss;
capinfo = le16toh(*(uint16_t *)frm);
frm += 2;
status = le16toh(*(uint16_t *)frm);
frm += 2;
if (status != 0) {
IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_ASSOC,
wh->i_addr2, "%sassoc failed (reason %d)",
ISREASSOC(subtype) ? "re" : "", status);
vap->iv_stats.is_rx_auth_fail++; /* XXX */
return;
}
associd = le16toh(*(uint16_t *)frm);
frm += 2;
rates = xrates = wme = htcap = htinfo = NULL;
vhtcap = vhtopmode = NULL;
while (efrm - frm > 1) {
IEEE80211_VERIFY_LENGTH(efrm - frm, frm[1] + 2, return);
switch (*frm) {
case IEEE80211_ELEMID_RATES:
rates = frm;
break;
case IEEE80211_ELEMID_XRATES:
xrates = frm;
break;
case IEEE80211_ELEMID_HTCAP:
htcap = frm;
break;
case IEEE80211_ELEMID_HTINFO:
htinfo = frm;
break;
case IEEE80211_ELEMID_VENDOR:
if (iswmeoui(frm))
wme = frm;
else if (vap->iv_flags_ht & IEEE80211_FHT_HTCOMPAT) {
/*
* Accept pre-draft HT ie's if the
* standard ones have not been seen.
*/
if (ishtcapoui(frm)) {
if (htcap == NULL)
htcap = frm;
} else if (ishtinfooui(frm)) {
if (htinfo == NULL)
htinfo = frm;
}
}
/* XXX Atheros OUI support */
break;
case IEEE80211_ELEMID_VHT_CAP:
vhtcap = frm;
break;
case IEEE80211_ELEMID_VHT_OPMODE:
vhtopmode = frm;
break;
}
frm += frm[1] + 2;
}
IEEE80211_VERIFY_ELEMENT(rates, IEEE80211_RATE_MAXSIZE, return);
if (xrates != NULL)
IEEE80211_VERIFY_ELEMENT(xrates,
IEEE80211_RATE_MAXSIZE - rates[1], return);
rate = ieee80211_setup_rates(ni, rates, xrates,
IEEE80211_F_JOIN |
IEEE80211_F_DOSORT | IEEE80211_F_DOFRATE |
IEEE80211_F_DONEGO | IEEE80211_F_DODEL);
if (rate & IEEE80211_RATE_BASIC) {
IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_ASSOC,
wh->i_addr2,
"%sassoc failed (rate set mismatch)",
ISREASSOC(subtype) ? "re" : "");
vap->iv_stats.is_rx_assoc_norate++;
ieee80211_new_state(vap, IEEE80211_S_SCAN,
IEEE80211_SCAN_FAIL_STATUS);
return;
}
ni->ni_capinfo = capinfo;
ni->ni_associd = associd;
if (ni->ni_jointime == 0)
ni->ni_jointime = time_uptime;
if (wme != NULL &&
ieee80211_parse_wmeparams(vap, wme, wh, &qosinfo) >= 0) {
ni->ni_flags |= IEEE80211_NODE_QOS;
ieee80211_wme_updateparams(vap);
} else
ni->ni_flags &= ~IEEE80211_NODE_QOS;
/*
* Setup HT state according to the negotiation.
*
* NB: shouldn't need to check if HT use is enabled but some
* ap's send back HT ie's even when we don't indicate we
* are HT capable in our AssocReq.
*/
if (htcap != NULL && htinfo != NULL &&
(vap->iv_flags_ht & IEEE80211_FHT_HT)) {
ieee80211_ht_node_init(ni);
ieee80211_ht_updateparams(ni, htcap, htinfo);
if ((vhtcap != NULL) && (vhtopmode != NULL) &
(vap->iv_flags_vht & IEEE80211_FVHT_VHT)) {
/*
* Log if we get a VHT assoc/reassoc response.
* We aren't ready for 2GHz VHT support.
*/
if (IEEE80211_IS_CHAN_2GHZ(ni->ni_chan)) {
printf("%s: peer %6D: VHT on 2GHz, ignoring\n",
__func__,
ni->ni_macaddr,
":");
} else {
ieee80211_vht_node_init(ni);
ieee80211_vht_updateparams(ni, vhtcap, vhtopmode);
ieee80211_setup_vht_rates(ni, vhtcap, vhtopmode);
}
}
ieee80211_ht_updateparams_final(ni, htcap, htinfo);
ieee80211_setup_htrates(ni, htcap,
IEEE80211_F_JOIN | IEEE80211_F_DOBRS);
ieee80211_setup_basic_htrates(ni, htinfo);
ieee80211_node_setuptxparms(ni);
ieee80211_ratectl_node_init(ni);
}
/*
* Always initialise FF/superg state; we can use this
* for doing A-MSDU encapsulation as well.
*/
#ifdef IEEE80211_SUPPORT_SUPERG
ieee80211_ff_node_init(ni);
#endif
/*
* Configure state now that we are associated.
*
* XXX may need different/additional driver callbacks?
*/
if (IEEE80211_IS_CHAN_A(ic->ic_curchan) ||
(ni->ni_capinfo & IEEE80211_CAPINFO_SHORT_PREAMBLE)) {
vap->iv_flags |= IEEE80211_F_SHPREAMBLE;
vap->iv_flags &= ~IEEE80211_F_USEBARKER;
} else {
vap->iv_flags &= ~IEEE80211_F_SHPREAMBLE;
vap->iv_flags |= IEEE80211_F_USEBARKER;
}
ieee80211_vap_set_shortslottime(vap,
IEEE80211_IS_CHAN_A(ic->ic_curchan) ||
(ni->ni_capinfo & IEEE80211_CAPINFO_SHORT_SLOTTIME));
ieee80211_vap_update_preamble(vap);
/*
* Honor ERP protection.
*
* NB: ni_erp should zero for non-11g operation.
*/
if (IEEE80211_IS_CHAN_ANYG(ic->ic_curchan) &&
(ni->ni_erp & IEEE80211_ERP_USE_PROTECTION))
vap->iv_flags |= IEEE80211_F_USEPROT;
else
vap->iv_flags &= ~IEEE80211_F_USEPROT;
ieee80211_vap_update_erp_protmode(vap);
IEEE80211_NOTE_MAC(vap,
IEEE80211_MSG_ASSOC | IEEE80211_MSG_DEBUG, wh->i_addr2,
"%sassoc success at aid %d: %s preamble, %s slot time%s%s%s%s%s%s%s%s%s",
ISREASSOC(subtype) ? "re" : "",
IEEE80211_NODE_AID(ni),
vap->iv_flags&IEEE80211_F_SHPREAMBLE ? "short" : "long",
vap->iv_flags&IEEE80211_F_SHSLOT ? "short" : "long",
vap->iv_flags&IEEE80211_F_USEPROT ? ", protection" : "",
ni->ni_flags & IEEE80211_NODE_QOS ? ", QoS" : "",
ni->ni_flags & IEEE80211_NODE_HT ?
(ni->ni_chw == 40 ? ", HT40" : ", HT20") : "",
ni->ni_flags & IEEE80211_NODE_AMPDU ? " (+AMPDU)" : "",
ni->ni_flags & IEEE80211_NODE_AMSDU ? " (+AMSDU)" : "",
ni->ni_flags & IEEE80211_NODE_MIMO_RTS ? " (+SMPS-DYN)" :
ni->ni_flags & IEEE80211_NODE_MIMO_PS ? " (+SMPS)" : "",
ni->ni_flags & IEEE80211_NODE_RIFS ? " (+RIFS)" : "",
IEEE80211_ATH_CAP(vap, ni, IEEE80211_NODE_FF) ?
", fast-frames" : "",
IEEE80211_ATH_CAP(vap, ni, IEEE80211_NODE_TURBOP) ?
", turbo" : ""
);
ieee80211_new_state(vap, IEEE80211_S_RUN, subtype);
break;
}
case IEEE80211_FC0_SUBTYPE_DEAUTH: {
uint16_t reason;
if (vap->iv_state == IEEE80211_S_SCAN) {
vap->iv_stats.is_rx_mgtdiscard++;
return;
}
if (!IEEE80211_ADDR_EQ(wh->i_addr1, vap->iv_myaddr)) {
/* NB: can happen when in promiscuous mode */
vap->iv_stats.is_rx_mgtdiscard++;
break;
}
/*
* deauth frame format
* [2] reason
*/
IEEE80211_VERIFY_LENGTH(efrm - frm, 2, return);
reason = le16toh(*(uint16_t *)frm);
vap->iv_stats.is_rx_deauth++;
vap->iv_stats.is_rx_deauth_code = reason;
IEEE80211_NODE_STAT(ni, rx_deauth);
IEEE80211_NOTE(vap, IEEE80211_MSG_AUTH, ni,
"recv deauthenticate (reason: %d (%s))", reason,
ieee80211_reason_to_string(reason));
ieee80211_new_state(vap, IEEE80211_S_AUTH,
(reason << 8) | IEEE80211_FC0_SUBTYPE_DEAUTH);
break;
}
case IEEE80211_FC0_SUBTYPE_DISASSOC: {
uint16_t reason;
if (vap->iv_state != IEEE80211_S_RUN &&
vap->iv_state != IEEE80211_S_ASSOC &&
vap->iv_state != IEEE80211_S_AUTH) {
vap->iv_stats.is_rx_mgtdiscard++;
return;
}
if (!IEEE80211_ADDR_EQ(wh->i_addr1, vap->iv_myaddr)) {
/* NB: can happen when in promiscuous mode */
vap->iv_stats.is_rx_mgtdiscard++;
break;
}
/*
* disassoc frame format
* [2] reason
*/
IEEE80211_VERIFY_LENGTH(efrm - frm, 2, return);
reason = le16toh(*(uint16_t *)frm);
vap->iv_stats.is_rx_disassoc++;
vap->iv_stats.is_rx_disassoc_code = reason;
IEEE80211_NODE_STAT(ni, rx_disassoc);
IEEE80211_NOTE(vap, IEEE80211_MSG_ASSOC, ni,
"recv disassociate (reason: %d (%s))", reason,
ieee80211_reason_to_string(reason));
ieee80211_new_state(vap, IEEE80211_S_ASSOC, 0);
break;
}
case IEEE80211_FC0_SUBTYPE_ACTION:
case IEEE80211_FC0_SUBTYPE_ACTION_NOACK:
if (!IEEE80211_ADDR_EQ(vap->iv_myaddr, wh->i_addr1) &&
!IEEE80211_IS_MULTICAST(wh->i_addr1)) {
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
wh, NULL, "%s", "not for us");
vap->iv_stats.is_rx_mgtdiscard++;
} else if (vap->iv_state != IEEE80211_S_RUN) {
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
wh, NULL, "wrong state %s",
ieee80211_state_name[vap->iv_state]);
vap->iv_stats.is_rx_mgtdiscard++;
} else {
if (ieee80211_parse_action(ni, m0) == 0)
(void)ic->ic_recv_action(ni, wh, frm, efrm);
}
break;
case IEEE80211_FC0_SUBTYPE_ASSOC_REQ:
case IEEE80211_FC0_SUBTYPE_REASSOC_REQ:
case IEEE80211_FC0_SUBTYPE_PROBE_REQ:
case IEEE80211_FC0_SUBTYPE_TIMING_ADV:
case IEEE80211_FC0_SUBTYPE_ATIM:
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
wh, NULL, "%s", "not handled");
vap->iv_stats.is_rx_mgtdiscard++;
break;
default:
IEEE80211_DISCARD(vap, IEEE80211_MSG_ANY,
wh, "mgt", "subtype 0x%x not handled", subtype);
vap->iv_stats.is_rx_badsubtype++;
break;
}
#undef ISREASSOC
}
static void
sta_recv_ctl(struct ieee80211_node *ni, struct mbuf *m, int subtype)
{
switch (subtype) {
case IEEE80211_FC0_SUBTYPE_BAR:
ieee80211_recv_bar(ni, m);
break;
}
}
Reference in New Issue View Git Blame Copy Permalink