d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
4d29853614
freebsd-dev/sys/pci
History
Bruce Evans 48792cfc18 Don't cast function pointers to (void *). This will cause warnings. 
They should be fixed when similar warnings for the general interrupt
attach routines are fixed.

Removed unused #include.
1997-07-01 00:45:45 +00:00
..
aic7870.c Modify my copyright notice to allow the sequencer to be used with GPLed 1997-06-27 19:39:34 +00:00
brktree_reg.h 1.15 4/18/97 John-Mark Gurney <gurney_j@resnet.uoregon.edu> 1997-05-01 00:16:31 +00:00
brooktree848.c Added 2 new defines: 1997-06-14 19:10:53 +00:00
bt9xx.c Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not 1997-02-22 09:48:43 +00:00
cy_pci.c Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not 1997-02-22 09:48:43 +00:00
cy_pcireg.h Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not 1997-02-22 09:48:43 +00:00
dc21040reg.h Clean import of Matt Thomas's if_de.c driver as of 970508, rev 1.85. The 1997-06-22 09:32:32 +00:00
if_de.c Initial set of patches to get it to compile on >= 3.0. Most of the 1997-06-22 09:48:42 +00:00
if_devar.h Clean import of Matt Thomas's if_de.c driver as of 970508, rev 1.85. The 1997-06-22 09:32:32 +00:00
if_ed_p.c Rearrange pci network card identification for easier additions. 1997-04-18 04:44:37 +00:00
if_en_pci.c import Chuck Cranor's ATM driver 1997-05-09 07:48:14 +00:00
if_fpa.c Don't include <sys/ioctl.h> in the kernel. Stage 1: don't include 1997-03-24 11:25:10 +00:00
if_fxp.c Minor optimization in fxp_intr. 1997-06-16 04:45:57 +00:00
if_fxpreg.h Added support for the Intel 82555 PHY chip which is being used on newer 1997-06-13 22:34:52 +00:00
if_lnc_p.c Deleted <pc98/pc98/pc98_device.h>. 1997-04-04 16:44:52 +00:00
if_sr_p.c Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not 1997-02-22 09:48:43 +00:00
if_vx_pci.c Don't cast function pointers to (void *). This will cause warnings. 1997-07-01 00:45:45 +00:00
locate.pl Perl script to convert NCR script address into label+offset. 1995-09-08 19:37:11 +00:00
meteor_reg.h Here is a patch that fix a few problems with the RGB version of 1996-06-07 03:03:25 +00:00
meteor.c Don't include <sys/ioctl.h> in the kernel. Stage 1: don't include 1997-03-24 11:25:10 +00:00
ncr.c Add device IDs for new Symbios SCSI chips (53c875J,885,895,896), which 1997-06-11 22:36:02 +00:00
ncrreg.h Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not 1997-02-22 09:48:43 +00:00
pci_compat.c Remove use of intrec*, use void* instead. 1997-05-30 20:58:04 +00:00
pci_ioctl.h Add PCI LKM support. 1997-01-21 23:23:40 +00:00
pci.c Modified to use renamed get_pci_apic_irq() -> pci_apic_pin() function. 1997-06-25 20:56:29 +00:00
pcireg.h PCI_CLASS_MASS_STORAGE (under PCI_COMPAT) was used in a driver in LINT 1997-06-01 16:00:43 +00:00
pcisupport.c Add code to correctly probe all buses on the Intel XXPRESS motherboard. 1997-05-30 21:01:47 +00:00
pcivar.h Completely replace the PCI bus driver code to make it better reflect 1997-05-26 15:08:43 +00:00
README.bt848 Fixed omission of reference to ioctl_bt848.h when installing on 2.2. 1997-05-01 00:42:54 +00:00
README.de Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not 1997-02-22 09:48:43 +00:00
README.de-le Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not 1997-02-22 09:48:43 +00:00
scsiiom.c Tekram supplied driver for their DC390 and DC390T controllers. 1996-12-15 23:40:48 +00:00
tek390.c Completely replace the PCI bus driver code to make it better reflect 1997-05-26 15:08:43 +00:00
tek390.h Rename DIAGNOSTIC to DMA_DIAGNOSTIC. 1996-12-18 11:35:12 +00:00
wd82371.c Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not 1997-02-22 09:48:43 +00:00
wd82371reg.h Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not 1997-02-22 09:48:43 +00:00
wdc_p.c Move CMD640 option from kernel Makefile into opt_wd.h 1997-04-28 19:26:18 +00:00

README.de-le 

$Id$

----------------

The enclosed drivers should be considered beta-test software.  These
drivers are in no way supported by Digital Equipment.  See the
disclaimers in the sources for more information.  Please be aware that
Digital does not employee me to write drivers for FreeBSD.

This kit contains one driver:

	de	DEC DE435 PCI NIC or compatible

See README.de for information and installation instruction specific to this
driver.

Could you please send me the startup messages in the boot
long along with the type of your PC once the driver configures?  

If you have any problems, comments, suggestions, rant or raves, don't
hesitate to send me mail @ thomas@lkg.dec.com.

Lastly, if you change or modify the code, I want context diffs of your
changes.  I want this to the canonical DEC EtherWORKS driver kit for
FreeBSD, NetBSD, BSD/386, and any other BSD based O/S.  Please make
sure your diffs are approriate conditionalized.

Thanks,
Matt Thomas
--
Mail:	thomas@lkg.dec.com
URL:	http://ftp.digital.com/~thomas/