fdce57a042
Currently, Application Processors (non-boot CPUs) are started by MD code at SI_SUB_CPU, but they are kept waiting in a "pen" until SI_SUB_SMP at which point they are released to run kernel threads. SI_SUB_SMP is one of the last SYSINIT levels, so APs don't enter the scheduler and start running threads until fairly late in the boot. This change moves SI_SUB_SMP up to just before software interrupt threads are created allowing the APs to start executing kernel threads much sooner (before any devices are probed). This allows several initialization routines that need to perform initialization on all CPUs to now perform that initialization in one step rather than having to defer the AP initialization to a second SYSINIT run at SI_SUB_SMP. It also permits all CPUs to be available for handling interrupts before any devices are probed. This last feature fixes a problem on with interrupt vector exhaustion. Specifically, in the old model all device interrupts were routed onto the boot CPU during boot. Later after the APs were released at SI_SUB_SMP, interrupts were redistributed across all CPUs. However, several drivers for multiqueue hardware allocate N interrupts per CPU in the system. In a system with many CPUs, just a few drivers doing this could exhaust the available pool of interrupt vectors on the boot CPU as each driver was allocating N * mp_ncpu vectors on the boot CPU. Now, drivers will allocate interrupts on their desired CPUs during boot meaning that only N interrupts are allocated from the boot CPU instead of N * mp_ncpu. Some other bits of code can also be simplified as smp_started is now true much earlier and will now always be true for these bits of code. This removes the need to treat the single-CPU boot environment as a special case. As a transition aid, the new behavior is available under a new kernel option (EARLY_AP_STARTUP). This will allow the option to be turned off if need be during initial testing. I plan to enable this on x86 by default in a followup commit in the next few days and to have all platforms moved over before 11.0. Once the transition is complete, the option will be removed along with the !EARLY_AP_STARTUP code. These changes have only been tested on x86. Other platform maintainers are encouraged to port their architectures over as well. The main things to check for are any uses of smp_started in MD code that can be simplified and SI_SUB_SMP SYSINITs in MD code that can be removed in the EARLY_AP_STARTUP case (e.g. the interrupt shuffling). PR: kern/199321 Reviewed by: markj, gnn, kib Sponsored by: Netflix
1386 lines
40 KiB
C
1386 lines
40 KiB
C
/*-
|
|
* Copyright (c) 2007-2009 Robert N. M. Watson
|
|
* Copyright (c) 2010-2011 Juniper Networks, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* This software was developed by Robert N. M. Watson under contract
|
|
* to Juniper Networks, Inc.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
/*
|
|
* netisr is a packet dispatch service, allowing synchronous (directly
|
|
* dispatched) and asynchronous (deferred dispatch) processing of packets by
|
|
* registered protocol handlers. Callers pass a protocol identifier and
|
|
* packet to netisr, along with a direct dispatch hint, and work will either
|
|
* be immediately processed by the registered handler, or passed to a
|
|
* software interrupt (SWI) thread for deferred dispatch. Callers will
|
|
* generally select one or the other based on:
|
|
*
|
|
* - Whether directly dispatching a netisr handler lead to code reentrance or
|
|
* lock recursion, such as entering the socket code from the socket code.
|
|
* - Whether directly dispatching a netisr handler lead to recursive
|
|
* processing, such as when decapsulating several wrapped layers of tunnel
|
|
* information (IPSEC within IPSEC within ...).
|
|
*
|
|
* Maintaining ordering for protocol streams is a critical design concern.
|
|
* Enforcing ordering limits the opportunity for concurrency, but maintains
|
|
* the strong ordering requirements found in some protocols, such as TCP. Of
|
|
* related concern is CPU affinity--it is desirable to process all data
|
|
* associated with a particular stream on the same CPU over time in order to
|
|
* avoid acquiring locks associated with the connection on different CPUs,
|
|
* keep connection data in one cache, and to generally encourage associated
|
|
* user threads to live on the same CPU as the stream. It's also desirable
|
|
* to avoid lock migration and contention where locks are associated with
|
|
* more than one flow.
|
|
*
|
|
* netisr supports several policy variations, represented by the
|
|
* NETISR_POLICY_* constants, allowing protocols to play various roles in
|
|
* identifying flows, assigning work to CPUs, etc. These are described in
|
|
* netisr.h.
|
|
*/
|
|
|
|
#include "opt_ddb.h"
|
|
#include "opt_device_polling.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/kthread.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/interrupt.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/pcpu.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/rmlock.h>
|
|
#include <sys/sched.h>
|
|
#include <sys/smp.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/systm.h>
|
|
|
|
#ifdef DDB
|
|
#include <ddb/ddb.h>
|
|
#endif
|
|
|
|
#define _WANT_NETISR_INTERNAL /* Enable definitions from netisr_internal.h */
|
|
#include <net/if.h>
|
|
#include <net/if_var.h>
|
|
#include <net/netisr.h>
|
|
#include <net/netisr_internal.h>
|
|
#include <net/vnet.h>
|
|
|
|
/*-
|
|
* Synchronize use and modification of the registered netisr data structures;
|
|
* acquire a read lock while modifying the set of registered protocols to
|
|
* prevent partially registered or unregistered protocols from being run.
|
|
*
|
|
* The following data structures and fields are protected by this lock:
|
|
*
|
|
* - The netisr_proto array, including all fields of struct netisr_proto.
|
|
* - The nws array, including all fields of struct netisr_worker.
|
|
* - The nws_array array.
|
|
*
|
|
* Note: the NETISR_LOCKING define controls whether read locks are acquired
|
|
* in packet processing paths requiring netisr registration stability. This
|
|
* is disabled by default as it can lead to measurable performance
|
|
* degradation even with rmlocks (3%-6% for loopback ping-pong traffic), and
|
|
* because netisr registration and unregistration is extremely rare at
|
|
* runtime. If it becomes more common, this decision should be revisited.
|
|
*
|
|
* XXXRW: rmlocks don't support assertions.
|
|
*/
|
|
static struct rmlock netisr_rmlock;
|
|
#define NETISR_LOCK_INIT() rm_init_flags(&netisr_rmlock, "netisr", \
|
|
RM_NOWITNESS)
|
|
#define NETISR_LOCK_ASSERT()
|
|
#define NETISR_RLOCK(tracker) rm_rlock(&netisr_rmlock, (tracker))
|
|
#define NETISR_RUNLOCK(tracker) rm_runlock(&netisr_rmlock, (tracker))
|
|
#define NETISR_WLOCK() rm_wlock(&netisr_rmlock)
|
|
#define NETISR_WUNLOCK() rm_wunlock(&netisr_rmlock)
|
|
/* #define NETISR_LOCKING */
|
|
|
|
static SYSCTL_NODE(_net, OID_AUTO, isr, CTLFLAG_RW, 0, "netisr");
|
|
|
|
/*-
|
|
* Three global direct dispatch policies are supported:
|
|
*
|
|
* NETISR_DISPATCH_DEFERRED: All work is deferred for a netisr, regardless of
|
|
* context (may be overriden by protocols).
|
|
*
|
|
* NETISR_DISPATCH_HYBRID: If the executing context allows direct dispatch,
|
|
* and we're running on the CPU the work would be performed on, then direct
|
|
* dispatch it if it wouldn't violate ordering constraints on the workstream.
|
|
*
|
|
* NETISR_DISPATCH_DIRECT: If the executing context allows direct dispatch,
|
|
* always direct dispatch. (The default.)
|
|
*
|
|
* Notice that changing the global policy could lead to short periods of
|
|
* misordered processing, but this is considered acceptable as compared to
|
|
* the complexity of enforcing ordering during policy changes. Protocols can
|
|
* override the global policy (when they're not doing that, they select
|
|
* NETISR_DISPATCH_DEFAULT).
|
|
*/
|
|
#define NETISR_DISPATCH_POLICY_DEFAULT NETISR_DISPATCH_DIRECT
|
|
#define NETISR_DISPATCH_POLICY_MAXSTR 20 /* Used for temporary buffers. */
|
|
static u_int netisr_dispatch_policy = NETISR_DISPATCH_POLICY_DEFAULT;
|
|
static int sysctl_netisr_dispatch_policy(SYSCTL_HANDLER_ARGS);
|
|
SYSCTL_PROC(_net_isr, OID_AUTO, dispatch, CTLTYPE_STRING | CTLFLAG_RWTUN,
|
|
0, 0, sysctl_netisr_dispatch_policy, "A",
|
|
"netisr dispatch policy");
|
|
|
|
/*
|
|
* Allow the administrator to limit the number of threads (CPUs) to use for
|
|
* netisr. We don't check netisr_maxthreads before creating the thread for
|
|
* CPU 0. This must be set at boot. We will create at most one thread per CPU.
|
|
* By default we initialize this to 1 which would assign just 1 cpu (cpu0) and
|
|
* therefore only 1 workstream. If set to -1, netisr would use all cpus
|
|
* (mp_ncpus) and therefore would have those many workstreams. One workstream
|
|
* per thread (CPU).
|
|
*/
|
|
static int netisr_maxthreads = 1; /* Max number of threads. */
|
|
SYSCTL_INT(_net_isr, OID_AUTO, maxthreads, CTLFLAG_RDTUN,
|
|
&netisr_maxthreads, 0,
|
|
"Use at most this many CPUs for netisr processing");
|
|
|
|
static int netisr_bindthreads = 0; /* Bind threads to CPUs. */
|
|
SYSCTL_INT(_net_isr, OID_AUTO, bindthreads, CTLFLAG_RDTUN,
|
|
&netisr_bindthreads, 0, "Bind netisr threads to CPUs.");
|
|
|
|
/*
|
|
* Limit per-workstream mbuf queue limits s to at most net.isr.maxqlimit,
|
|
* both for initial configuration and later modification using
|
|
* netisr_setqlimit().
|
|
*/
|
|
#define NETISR_DEFAULT_MAXQLIMIT 10240
|
|
static u_int netisr_maxqlimit = NETISR_DEFAULT_MAXQLIMIT;
|
|
SYSCTL_UINT(_net_isr, OID_AUTO, maxqlimit, CTLFLAG_RDTUN,
|
|
&netisr_maxqlimit, 0,
|
|
"Maximum netisr per-protocol, per-CPU queue depth.");
|
|
|
|
/*
|
|
* The default per-workstream mbuf queue limit for protocols that don't
|
|
* initialize the nh_qlimit field of their struct netisr_handler. If this is
|
|
* set above netisr_maxqlimit, we truncate it to the maximum during boot.
|
|
*/
|
|
#define NETISR_DEFAULT_DEFAULTQLIMIT 256
|
|
static u_int netisr_defaultqlimit = NETISR_DEFAULT_DEFAULTQLIMIT;
|
|
SYSCTL_UINT(_net_isr, OID_AUTO, defaultqlimit, CTLFLAG_RDTUN,
|
|
&netisr_defaultqlimit, 0,
|
|
"Default netisr per-protocol, per-CPU queue limit if not set by protocol");
|
|
|
|
/*
|
|
* Store and export the compile-time constant NETISR_MAXPROT limit on the
|
|
* number of protocols that can register with netisr at a time. This is
|
|
* required for crashdump analysis, as it sizes netisr_proto[].
|
|
*/
|
|
static u_int netisr_maxprot = NETISR_MAXPROT;
|
|
SYSCTL_UINT(_net_isr, OID_AUTO, maxprot, CTLFLAG_RD,
|
|
&netisr_maxprot, 0,
|
|
"Compile-time limit on the number of protocols supported by netisr.");
|
|
|
|
/*
|
|
* The netisr_proto array describes all registered protocols, indexed by
|
|
* protocol number. See netisr_internal.h for more details.
|
|
*/
|
|
static struct netisr_proto netisr_proto[NETISR_MAXPROT];
|
|
|
|
/*
|
|
* Per-CPU workstream data. See netisr_internal.h for more details.
|
|
*/
|
|
DPCPU_DEFINE(struct netisr_workstream, nws);
|
|
|
|
/*
|
|
* Map contiguous values between 0 and nws_count into CPU IDs appropriate for
|
|
* accessing workstreams. This allows constructions of the form
|
|
* DPCPU_ID_GET(nws_array[arbitraryvalue % nws_count], nws).
|
|
*/
|
|
static u_int nws_array[MAXCPU];
|
|
|
|
/*
|
|
* Number of registered workstreams. Will be at most the number of running
|
|
* CPUs once fully started.
|
|
*/
|
|
static u_int nws_count;
|
|
SYSCTL_UINT(_net_isr, OID_AUTO, numthreads, CTLFLAG_RD,
|
|
&nws_count, 0, "Number of extant netisr threads.");
|
|
|
|
/*
|
|
* Synchronization for each workstream: a mutex protects all mutable fields
|
|
* in each stream, including per-protocol state (mbuf queues). The SWI is
|
|
* woken up if asynchronous dispatch is required.
|
|
*/
|
|
#define NWS_LOCK(s) mtx_lock(&(s)->nws_mtx)
|
|
#define NWS_LOCK_ASSERT(s) mtx_assert(&(s)->nws_mtx, MA_OWNED)
|
|
#define NWS_UNLOCK(s) mtx_unlock(&(s)->nws_mtx)
|
|
#define NWS_SIGNAL(s) swi_sched((s)->nws_swi_cookie, 0)
|
|
|
|
/*
|
|
* Utility routines for protocols that implement their own mapping of flows
|
|
* to CPUs.
|
|
*/
|
|
u_int
|
|
netisr_get_cpucount(void)
|
|
{
|
|
|
|
return (nws_count);
|
|
}
|
|
|
|
u_int
|
|
netisr_get_cpuid(u_int cpunumber)
|
|
{
|
|
|
|
KASSERT(cpunumber < nws_count, ("%s: %u > %u", __func__, cpunumber,
|
|
nws_count));
|
|
|
|
return (nws_array[cpunumber]);
|
|
}
|
|
|
|
/*
|
|
* The default implementation of flow -> CPU ID mapping.
|
|
*
|
|
* Non-static so that protocols can use it to map their own work to specific
|
|
* CPUs in a manner consistent to netisr for affinity purposes.
|
|
*/
|
|
u_int
|
|
netisr_default_flow2cpu(u_int flowid)
|
|
{
|
|
|
|
return (nws_array[flowid % nws_count]);
|
|
}
|
|
|
|
/*
|
|
* Dispatch tunable and sysctl configuration.
|
|
*/
|
|
struct netisr_dispatch_table_entry {
|
|
u_int ndte_policy;
|
|
const char *ndte_policy_str;
|
|
};
|
|
static const struct netisr_dispatch_table_entry netisr_dispatch_table[] = {
|
|
{ NETISR_DISPATCH_DEFAULT, "default" },
|
|
{ NETISR_DISPATCH_DEFERRED, "deferred" },
|
|
{ NETISR_DISPATCH_HYBRID, "hybrid" },
|
|
{ NETISR_DISPATCH_DIRECT, "direct" },
|
|
};
|
|
|
|
static void
|
|
netisr_dispatch_policy_to_str(u_int dispatch_policy, char *buffer,
|
|
u_int buflen)
|
|
{
|
|
const struct netisr_dispatch_table_entry *ndtep;
|
|
const char *str;
|
|
u_int i;
|
|
|
|
str = "unknown";
|
|
for (i = 0; i < nitems(netisr_dispatch_table); i++) {
|
|
ndtep = &netisr_dispatch_table[i];
|
|
if (ndtep->ndte_policy == dispatch_policy) {
|
|
str = ndtep->ndte_policy_str;
|
|
break;
|
|
}
|
|
}
|
|
snprintf(buffer, buflen, "%s", str);
|
|
}
|
|
|
|
static int
|
|
netisr_dispatch_policy_from_str(const char *str, u_int *dispatch_policyp)
|
|
{
|
|
const struct netisr_dispatch_table_entry *ndtep;
|
|
u_int i;
|
|
|
|
for (i = 0; i < nitems(netisr_dispatch_table); i++) {
|
|
ndtep = &netisr_dispatch_table[i];
|
|
if (strcmp(ndtep->ndte_policy_str, str) == 0) {
|
|
*dispatch_policyp = ndtep->ndte_policy;
|
|
return (0);
|
|
}
|
|
}
|
|
return (EINVAL);
|
|
}
|
|
|
|
static int
|
|
sysctl_netisr_dispatch_policy(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
char tmp[NETISR_DISPATCH_POLICY_MAXSTR];
|
|
u_int dispatch_policy;
|
|
int error;
|
|
|
|
netisr_dispatch_policy_to_str(netisr_dispatch_policy, tmp,
|
|
sizeof(tmp));
|
|
error = sysctl_handle_string(oidp, tmp, sizeof(tmp), req);
|
|
if (error == 0 && req->newptr != NULL) {
|
|
error = netisr_dispatch_policy_from_str(tmp,
|
|
&dispatch_policy);
|
|
if (error == 0 && dispatch_policy == NETISR_DISPATCH_DEFAULT)
|
|
error = EINVAL;
|
|
if (error == 0)
|
|
netisr_dispatch_policy = dispatch_policy;
|
|
}
|
|
return (error);
|
|
}
|
|
|
|
/*
|
|
* Register a new netisr handler, which requires initializing per-protocol
|
|
* fields for each workstream. All netisr work is briefly suspended while
|
|
* the protocol is installed.
|
|
*/
|
|
void
|
|
netisr_register(const struct netisr_handler *nhp)
|
|
{
|
|
struct netisr_work *npwp;
|
|
const char *name;
|
|
u_int i, proto;
|
|
|
|
proto = nhp->nh_proto;
|
|
name = nhp->nh_name;
|
|
|
|
/*
|
|
* Test that the requested registration is valid.
|
|
*/
|
|
KASSERT(nhp->nh_name != NULL,
|
|
("%s: nh_name NULL for %u", __func__, proto));
|
|
KASSERT(nhp->nh_handler != NULL,
|
|
("%s: nh_handler NULL for %s", __func__, name));
|
|
KASSERT(nhp->nh_policy == NETISR_POLICY_SOURCE ||
|
|
nhp->nh_policy == NETISR_POLICY_FLOW ||
|
|
nhp->nh_policy == NETISR_POLICY_CPU,
|
|
("%s: unsupported nh_policy %u for %s", __func__,
|
|
nhp->nh_policy, name));
|
|
KASSERT(nhp->nh_policy == NETISR_POLICY_FLOW ||
|
|
nhp->nh_m2flow == NULL,
|
|
("%s: nh_policy != FLOW but m2flow defined for %s", __func__,
|
|
name));
|
|
KASSERT(nhp->nh_policy == NETISR_POLICY_CPU || nhp->nh_m2cpuid == NULL,
|
|
("%s: nh_policy != CPU but m2cpuid defined for %s", __func__,
|
|
name));
|
|
KASSERT(nhp->nh_policy != NETISR_POLICY_CPU || nhp->nh_m2cpuid != NULL,
|
|
("%s: nh_policy == CPU but m2cpuid not defined for %s", __func__,
|
|
name));
|
|
KASSERT(nhp->nh_dispatch == NETISR_DISPATCH_DEFAULT ||
|
|
nhp->nh_dispatch == NETISR_DISPATCH_DEFERRED ||
|
|
nhp->nh_dispatch == NETISR_DISPATCH_HYBRID ||
|
|
nhp->nh_dispatch == NETISR_DISPATCH_DIRECT,
|
|
("%s: invalid nh_dispatch (%u)", __func__, nhp->nh_dispatch));
|
|
|
|
KASSERT(proto < NETISR_MAXPROT,
|
|
("%s(%u, %s): protocol too big", __func__, proto, name));
|
|
|
|
/*
|
|
* Test that no existing registration exists for this protocol.
|
|
*/
|
|
NETISR_WLOCK();
|
|
KASSERT(netisr_proto[proto].np_name == NULL,
|
|
("%s(%u, %s): name present", __func__, proto, name));
|
|
KASSERT(netisr_proto[proto].np_handler == NULL,
|
|
("%s(%u, %s): handler present", __func__, proto, name));
|
|
|
|
netisr_proto[proto].np_name = name;
|
|
netisr_proto[proto].np_handler = nhp->nh_handler;
|
|
netisr_proto[proto].np_m2flow = nhp->nh_m2flow;
|
|
netisr_proto[proto].np_m2cpuid = nhp->nh_m2cpuid;
|
|
netisr_proto[proto].np_drainedcpu = nhp->nh_drainedcpu;
|
|
if (nhp->nh_qlimit == 0)
|
|
netisr_proto[proto].np_qlimit = netisr_defaultqlimit;
|
|
else if (nhp->nh_qlimit > netisr_maxqlimit) {
|
|
printf("%s: %s requested queue limit %u capped to "
|
|
"net.isr.maxqlimit %u\n", __func__, name, nhp->nh_qlimit,
|
|
netisr_maxqlimit);
|
|
netisr_proto[proto].np_qlimit = netisr_maxqlimit;
|
|
} else
|
|
netisr_proto[proto].np_qlimit = nhp->nh_qlimit;
|
|
netisr_proto[proto].np_policy = nhp->nh_policy;
|
|
netisr_proto[proto].np_dispatch = nhp->nh_dispatch;
|
|
CPU_FOREACH(i) {
|
|
npwp = &(DPCPU_ID_PTR(i, nws))->nws_work[proto];
|
|
bzero(npwp, sizeof(*npwp));
|
|
npwp->nw_qlimit = netisr_proto[proto].np_qlimit;
|
|
}
|
|
NETISR_WUNLOCK();
|
|
}
|
|
|
|
/*
|
|
* Clear drop counters across all workstreams for a protocol.
|
|
*/
|
|
void
|
|
netisr_clearqdrops(const struct netisr_handler *nhp)
|
|
{
|
|
struct netisr_work *npwp;
|
|
#ifdef INVARIANTS
|
|
const char *name;
|
|
#endif
|
|
u_int i, proto;
|
|
|
|
proto = nhp->nh_proto;
|
|
#ifdef INVARIANTS
|
|
name = nhp->nh_name;
|
|
#endif
|
|
KASSERT(proto < NETISR_MAXPROT,
|
|
("%s(%u): protocol too big for %s", __func__, proto, name));
|
|
|
|
NETISR_WLOCK();
|
|
KASSERT(netisr_proto[proto].np_handler != NULL,
|
|
("%s(%u): protocol not registered for %s", __func__, proto,
|
|
name));
|
|
|
|
CPU_FOREACH(i) {
|
|
npwp = &(DPCPU_ID_PTR(i, nws))->nws_work[proto];
|
|
npwp->nw_qdrops = 0;
|
|
}
|
|
NETISR_WUNLOCK();
|
|
}
|
|
|
|
/*
|
|
* Query current drop counters across all workstreams for a protocol.
|
|
*/
|
|
void
|
|
netisr_getqdrops(const struct netisr_handler *nhp, u_int64_t *qdropp)
|
|
{
|
|
struct netisr_work *npwp;
|
|
struct rm_priotracker tracker;
|
|
#ifdef INVARIANTS
|
|
const char *name;
|
|
#endif
|
|
u_int i, proto;
|
|
|
|
*qdropp = 0;
|
|
proto = nhp->nh_proto;
|
|
#ifdef INVARIANTS
|
|
name = nhp->nh_name;
|
|
#endif
|
|
KASSERT(proto < NETISR_MAXPROT,
|
|
("%s(%u): protocol too big for %s", __func__, proto, name));
|
|
|
|
NETISR_RLOCK(&tracker);
|
|
KASSERT(netisr_proto[proto].np_handler != NULL,
|
|
("%s(%u): protocol not registered for %s", __func__, proto,
|
|
name));
|
|
|
|
CPU_FOREACH(i) {
|
|
npwp = &(DPCPU_ID_PTR(i, nws))->nws_work[proto];
|
|
*qdropp += npwp->nw_qdrops;
|
|
}
|
|
NETISR_RUNLOCK(&tracker);
|
|
}
|
|
|
|
/*
|
|
* Query current per-workstream queue limit for a protocol.
|
|
*/
|
|
void
|
|
netisr_getqlimit(const struct netisr_handler *nhp, u_int *qlimitp)
|
|
{
|
|
struct rm_priotracker tracker;
|
|
#ifdef INVARIANTS
|
|
const char *name;
|
|
#endif
|
|
u_int proto;
|
|
|
|
proto = nhp->nh_proto;
|
|
#ifdef INVARIANTS
|
|
name = nhp->nh_name;
|
|
#endif
|
|
KASSERT(proto < NETISR_MAXPROT,
|
|
("%s(%u): protocol too big for %s", __func__, proto, name));
|
|
|
|
NETISR_RLOCK(&tracker);
|
|
KASSERT(netisr_proto[proto].np_handler != NULL,
|
|
("%s(%u): protocol not registered for %s", __func__, proto,
|
|
name));
|
|
*qlimitp = netisr_proto[proto].np_qlimit;
|
|
NETISR_RUNLOCK(&tracker);
|
|
}
|
|
|
|
/*
|
|
* Update the queue limit across per-workstream queues for a protocol. We
|
|
* simply change the limits, and don't drain overflowed packets as they will
|
|
* (hopefully) take care of themselves shortly.
|
|
*/
|
|
int
|
|
netisr_setqlimit(const struct netisr_handler *nhp, u_int qlimit)
|
|
{
|
|
struct netisr_work *npwp;
|
|
#ifdef INVARIANTS
|
|
const char *name;
|
|
#endif
|
|
u_int i, proto;
|
|
|
|
if (qlimit > netisr_maxqlimit)
|
|
return (EINVAL);
|
|
|
|
proto = nhp->nh_proto;
|
|
#ifdef INVARIANTS
|
|
name = nhp->nh_name;
|
|
#endif
|
|
KASSERT(proto < NETISR_MAXPROT,
|
|
("%s(%u): protocol too big for %s", __func__, proto, name));
|
|
|
|
NETISR_WLOCK();
|
|
KASSERT(netisr_proto[proto].np_handler != NULL,
|
|
("%s(%u): protocol not registered for %s", __func__, proto,
|
|
name));
|
|
|
|
netisr_proto[proto].np_qlimit = qlimit;
|
|
CPU_FOREACH(i) {
|
|
npwp = &(DPCPU_ID_PTR(i, nws))->nws_work[proto];
|
|
npwp->nw_qlimit = qlimit;
|
|
}
|
|
NETISR_WUNLOCK();
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Drain all packets currently held in a particular protocol work queue.
|
|
*/
|
|
static void
|
|
netisr_drain_proto(struct netisr_work *npwp)
|
|
{
|
|
struct mbuf *m;
|
|
|
|
/*
|
|
* We would assert the lock on the workstream but it's not passed in.
|
|
*/
|
|
while ((m = npwp->nw_head) != NULL) {
|
|
npwp->nw_head = m->m_nextpkt;
|
|
m->m_nextpkt = NULL;
|
|
if (npwp->nw_head == NULL)
|
|
npwp->nw_tail = NULL;
|
|
npwp->nw_len--;
|
|
m_freem(m);
|
|
}
|
|
KASSERT(npwp->nw_tail == NULL, ("%s: tail", __func__));
|
|
KASSERT(npwp->nw_len == 0, ("%s: len", __func__));
|
|
}
|
|
|
|
/*
|
|
* Remove the registration of a network protocol, which requires clearing
|
|
* per-protocol fields across all workstreams, including freeing all mbufs in
|
|
* the queues at time of unregister. All work in netisr is briefly suspended
|
|
* while this takes place.
|
|
*/
|
|
void
|
|
netisr_unregister(const struct netisr_handler *nhp)
|
|
{
|
|
struct netisr_work *npwp;
|
|
#ifdef INVARIANTS
|
|
const char *name;
|
|
#endif
|
|
u_int i, proto;
|
|
|
|
proto = nhp->nh_proto;
|
|
#ifdef INVARIANTS
|
|
name = nhp->nh_name;
|
|
#endif
|
|
KASSERT(proto < NETISR_MAXPROT,
|
|
("%s(%u): protocol too big for %s", __func__, proto, name));
|
|
|
|
NETISR_WLOCK();
|
|
KASSERT(netisr_proto[proto].np_handler != NULL,
|
|
("%s(%u): protocol not registered for %s", __func__, proto,
|
|
name));
|
|
|
|
netisr_proto[proto].np_name = NULL;
|
|
netisr_proto[proto].np_handler = NULL;
|
|
netisr_proto[proto].np_m2flow = NULL;
|
|
netisr_proto[proto].np_m2cpuid = NULL;
|
|
netisr_proto[proto].np_qlimit = 0;
|
|
netisr_proto[proto].np_policy = 0;
|
|
CPU_FOREACH(i) {
|
|
npwp = &(DPCPU_ID_PTR(i, nws))->nws_work[proto];
|
|
netisr_drain_proto(npwp);
|
|
bzero(npwp, sizeof(*npwp));
|
|
}
|
|
NETISR_WUNLOCK();
|
|
}
|
|
|
|
/*
|
|
* Compose the global and per-protocol policies on dispatch, and return the
|
|
* dispatch policy to use.
|
|
*/
|
|
static u_int
|
|
netisr_get_dispatch(struct netisr_proto *npp)
|
|
{
|
|
|
|
/*
|
|
* Protocol-specific configuration overrides the global default.
|
|
*/
|
|
if (npp->np_dispatch != NETISR_DISPATCH_DEFAULT)
|
|
return (npp->np_dispatch);
|
|
return (netisr_dispatch_policy);
|
|
}
|
|
|
|
/*
|
|
* Look up the workstream given a packet and source identifier. Do this by
|
|
* checking the protocol's policy, and optionally call out to the protocol
|
|
* for assistance if required.
|
|
*/
|
|
static struct mbuf *
|
|
netisr_select_cpuid(struct netisr_proto *npp, u_int dispatch_policy,
|
|
uintptr_t source, struct mbuf *m, u_int *cpuidp)
|
|
{
|
|
struct ifnet *ifp;
|
|
u_int policy;
|
|
|
|
NETISR_LOCK_ASSERT();
|
|
|
|
/*
|
|
* In the event we have only one worker, shortcut and deliver to it
|
|
* without further ado.
|
|
*/
|
|
if (nws_count == 1) {
|
|
*cpuidp = nws_array[0];
|
|
return (m);
|
|
}
|
|
|
|
/*
|
|
* What happens next depends on the policy selected by the protocol.
|
|
* If we want to support per-interface policies, we should do that
|
|
* here first.
|
|
*/
|
|
policy = npp->np_policy;
|
|
if (policy == NETISR_POLICY_CPU) {
|
|
m = npp->np_m2cpuid(m, source, cpuidp);
|
|
if (m == NULL)
|
|
return (NULL);
|
|
|
|
/*
|
|
* It's possible for a protocol not to have a good idea about
|
|
* where to process a packet, in which case we fall back on
|
|
* the netisr code to decide. In the hybrid case, return the
|
|
* current CPU ID, which will force an immediate direct
|
|
* dispatch. In the queued case, fall back on the SOURCE
|
|
* policy.
|
|
*/
|
|
if (*cpuidp != NETISR_CPUID_NONE)
|
|
return (m);
|
|
if (dispatch_policy == NETISR_DISPATCH_HYBRID) {
|
|
*cpuidp = curcpu;
|
|
return (m);
|
|
}
|
|
policy = NETISR_POLICY_SOURCE;
|
|
}
|
|
|
|
if (policy == NETISR_POLICY_FLOW) {
|
|
if (M_HASHTYPE_GET(m) == M_HASHTYPE_NONE &&
|
|
npp->np_m2flow != NULL) {
|
|
m = npp->np_m2flow(m, source);
|
|
if (m == NULL)
|
|
return (NULL);
|
|
}
|
|
if (M_HASHTYPE_GET(m) != M_HASHTYPE_NONE) {
|
|
*cpuidp =
|
|
netisr_default_flow2cpu(m->m_pkthdr.flowid);
|
|
return (m);
|
|
}
|
|
policy = NETISR_POLICY_SOURCE;
|
|
}
|
|
|
|
KASSERT(policy == NETISR_POLICY_SOURCE,
|
|
("%s: invalid policy %u for %s", __func__, npp->np_policy,
|
|
npp->np_name));
|
|
|
|
ifp = m->m_pkthdr.rcvif;
|
|
if (ifp != NULL)
|
|
*cpuidp = nws_array[(ifp->if_index + source) % nws_count];
|
|
else
|
|
*cpuidp = nws_array[source % nws_count];
|
|
return (m);
|
|
}
|
|
|
|
/*
|
|
* Process packets associated with a workstream and protocol. For reasons of
|
|
* fairness, we process up to one complete netisr queue at a time, moving the
|
|
* queue to a stack-local queue for processing, but do not loop refreshing
|
|
* from the global queue. The caller is responsible for deciding whether to
|
|
* loop, and for setting the NWS_RUNNING flag. The passed workstream will be
|
|
* locked on entry and relocked before return, but will be released while
|
|
* processing. The number of packets processed is returned.
|
|
*/
|
|
static u_int
|
|
netisr_process_workstream_proto(struct netisr_workstream *nwsp, u_int proto)
|
|
{
|
|
struct netisr_work local_npw, *npwp;
|
|
u_int handled;
|
|
struct mbuf *m;
|
|
|
|
NETISR_LOCK_ASSERT();
|
|
NWS_LOCK_ASSERT(nwsp);
|
|
|
|
KASSERT(nwsp->nws_flags & NWS_RUNNING,
|
|
("%s(%u): not running", __func__, proto));
|
|
KASSERT(proto >= 0 && proto < NETISR_MAXPROT,
|
|
("%s(%u): invalid proto\n", __func__, proto));
|
|
|
|
npwp = &nwsp->nws_work[proto];
|
|
if (npwp->nw_len == 0)
|
|
return (0);
|
|
|
|
/*
|
|
* Move the global work queue to a thread-local work queue.
|
|
*
|
|
* Notice that this means the effective maximum length of the queue
|
|
* is actually twice that of the maximum queue length specified in
|
|
* the protocol registration call.
|
|
*/
|
|
handled = npwp->nw_len;
|
|
local_npw = *npwp;
|
|
npwp->nw_head = NULL;
|
|
npwp->nw_tail = NULL;
|
|
npwp->nw_len = 0;
|
|
nwsp->nws_pendingbits &= ~(1 << proto);
|
|
NWS_UNLOCK(nwsp);
|
|
while ((m = local_npw.nw_head) != NULL) {
|
|
local_npw.nw_head = m->m_nextpkt;
|
|
m->m_nextpkt = NULL;
|
|
if (local_npw.nw_head == NULL)
|
|
local_npw.nw_tail = NULL;
|
|
local_npw.nw_len--;
|
|
VNET_ASSERT(m->m_pkthdr.rcvif != NULL,
|
|
("%s:%d rcvif == NULL: m=%p", __func__, __LINE__, m));
|
|
CURVNET_SET(m->m_pkthdr.rcvif->if_vnet);
|
|
netisr_proto[proto].np_handler(m);
|
|
CURVNET_RESTORE();
|
|
}
|
|
KASSERT(local_npw.nw_len == 0,
|
|
("%s(%u): len %u", __func__, proto, local_npw.nw_len));
|
|
if (netisr_proto[proto].np_drainedcpu)
|
|
netisr_proto[proto].np_drainedcpu(nwsp->nws_cpu);
|
|
NWS_LOCK(nwsp);
|
|
npwp->nw_handled += handled;
|
|
return (handled);
|
|
}
|
|
|
|
/*
|
|
* SWI handler for netisr -- processes packets in a set of workstreams that
|
|
* it owns, woken up by calls to NWS_SIGNAL(). If this workstream is already
|
|
* being direct dispatched, go back to sleep and wait for the dispatching
|
|
* thread to wake us up again.
|
|
*/
|
|
static void
|
|
swi_net(void *arg)
|
|
{
|
|
#ifdef NETISR_LOCKING
|
|
struct rm_priotracker tracker;
|
|
#endif
|
|
struct netisr_workstream *nwsp;
|
|
u_int bits, prot;
|
|
|
|
nwsp = arg;
|
|
|
|
#ifdef DEVICE_POLLING
|
|
KASSERT(nws_count == 1,
|
|
("%s: device_polling but nws_count != 1", __func__));
|
|
netisr_poll();
|
|
#endif
|
|
#ifdef NETISR_LOCKING
|
|
NETISR_RLOCK(&tracker);
|
|
#endif
|
|
NWS_LOCK(nwsp);
|
|
KASSERT(!(nwsp->nws_flags & NWS_RUNNING), ("swi_net: running"));
|
|
if (nwsp->nws_flags & NWS_DISPATCHING)
|
|
goto out;
|
|
nwsp->nws_flags |= NWS_RUNNING;
|
|
nwsp->nws_flags &= ~NWS_SCHEDULED;
|
|
while ((bits = nwsp->nws_pendingbits) != 0) {
|
|
while ((prot = ffs(bits)) != 0) {
|
|
prot--;
|
|
bits &= ~(1 << prot);
|
|
(void)netisr_process_workstream_proto(nwsp, prot);
|
|
}
|
|
}
|
|
nwsp->nws_flags &= ~NWS_RUNNING;
|
|
out:
|
|
NWS_UNLOCK(nwsp);
|
|
#ifdef NETISR_LOCKING
|
|
NETISR_RUNLOCK(&tracker);
|
|
#endif
|
|
#ifdef DEVICE_POLLING
|
|
netisr_pollmore();
|
|
#endif
|
|
}
|
|
|
|
static int
|
|
netisr_queue_workstream(struct netisr_workstream *nwsp, u_int proto,
|
|
struct netisr_work *npwp, struct mbuf *m, int *dosignalp)
|
|
{
|
|
|
|
NWS_LOCK_ASSERT(nwsp);
|
|
|
|
*dosignalp = 0;
|
|
if (npwp->nw_len < npwp->nw_qlimit) {
|
|
m->m_nextpkt = NULL;
|
|
if (npwp->nw_head == NULL) {
|
|
npwp->nw_head = m;
|
|
npwp->nw_tail = m;
|
|
} else {
|
|
npwp->nw_tail->m_nextpkt = m;
|
|
npwp->nw_tail = m;
|
|
}
|
|
npwp->nw_len++;
|
|
if (npwp->nw_len > npwp->nw_watermark)
|
|
npwp->nw_watermark = npwp->nw_len;
|
|
|
|
/*
|
|
* We must set the bit regardless of NWS_RUNNING, so that
|
|
* swi_net() keeps calling netisr_process_workstream_proto().
|
|
*/
|
|
nwsp->nws_pendingbits |= (1 << proto);
|
|
if (!(nwsp->nws_flags &
|
|
(NWS_RUNNING | NWS_DISPATCHING | NWS_SCHEDULED))) {
|
|
nwsp->nws_flags |= NWS_SCHEDULED;
|
|
*dosignalp = 1; /* Defer until unlocked. */
|
|
}
|
|
npwp->nw_queued++;
|
|
return (0);
|
|
} else {
|
|
m_freem(m);
|
|
npwp->nw_qdrops++;
|
|
return (ENOBUFS);
|
|
}
|
|
}
|
|
|
|
static int
|
|
netisr_queue_internal(u_int proto, struct mbuf *m, u_int cpuid)
|
|
{
|
|
struct netisr_workstream *nwsp;
|
|
struct netisr_work *npwp;
|
|
int dosignal, error;
|
|
|
|
#ifdef NETISR_LOCKING
|
|
NETISR_LOCK_ASSERT();
|
|
#endif
|
|
KASSERT(cpuid <= mp_maxid, ("%s: cpuid too big (%u, %u)", __func__,
|
|
cpuid, mp_maxid));
|
|
KASSERT(!CPU_ABSENT(cpuid), ("%s: CPU %u absent", __func__, cpuid));
|
|
|
|
dosignal = 0;
|
|
error = 0;
|
|
nwsp = DPCPU_ID_PTR(cpuid, nws);
|
|
npwp = &nwsp->nws_work[proto];
|
|
NWS_LOCK(nwsp);
|
|
error = netisr_queue_workstream(nwsp, proto, npwp, m, &dosignal);
|
|
NWS_UNLOCK(nwsp);
|
|
if (dosignal)
|
|
NWS_SIGNAL(nwsp);
|
|
return (error);
|
|
}
|
|
|
|
int
|
|
netisr_queue_src(u_int proto, uintptr_t source, struct mbuf *m)
|
|
{
|
|
#ifdef NETISR_LOCKING
|
|
struct rm_priotracker tracker;
|
|
#endif
|
|
u_int cpuid;
|
|
int error;
|
|
|
|
KASSERT(proto < NETISR_MAXPROT,
|
|
("%s: invalid proto %u", __func__, proto));
|
|
|
|
#ifdef NETISR_LOCKING
|
|
NETISR_RLOCK(&tracker);
|
|
#endif
|
|
KASSERT(netisr_proto[proto].np_handler != NULL,
|
|
("%s: invalid proto %u", __func__, proto));
|
|
|
|
m = netisr_select_cpuid(&netisr_proto[proto], NETISR_DISPATCH_DEFERRED,
|
|
source, m, &cpuid);
|
|
if (m != NULL) {
|
|
KASSERT(!CPU_ABSENT(cpuid), ("%s: CPU %u absent", __func__,
|
|
cpuid));
|
|
error = netisr_queue_internal(proto, m, cpuid);
|
|
} else
|
|
error = ENOBUFS;
|
|
#ifdef NETISR_LOCKING
|
|
NETISR_RUNLOCK(&tracker);
|
|
#endif
|
|
return (error);
|
|
}
|
|
|
|
int
|
|
netisr_queue(u_int proto, struct mbuf *m)
|
|
{
|
|
|
|
return (netisr_queue_src(proto, 0, m));
|
|
}
|
|
|
|
/*
|
|
* Dispatch a packet for netisr processing; direct dispatch is permitted by
|
|
* calling context.
|
|
*/
|
|
int
|
|
netisr_dispatch_src(u_int proto, uintptr_t source, struct mbuf *m)
|
|
{
|
|
#ifdef NETISR_LOCKING
|
|
struct rm_priotracker tracker;
|
|
#endif
|
|
struct netisr_workstream *nwsp;
|
|
struct netisr_proto *npp;
|
|
struct netisr_work *npwp;
|
|
int dosignal, error;
|
|
u_int cpuid, dispatch_policy;
|
|
|
|
KASSERT(proto < NETISR_MAXPROT,
|
|
("%s: invalid proto %u", __func__, proto));
|
|
#ifdef NETISR_LOCKING
|
|
NETISR_RLOCK(&tracker);
|
|
#endif
|
|
npp = &netisr_proto[proto];
|
|
KASSERT(npp->np_handler != NULL, ("%s: invalid proto %u", __func__,
|
|
proto));
|
|
|
|
dispatch_policy = netisr_get_dispatch(npp);
|
|
if (dispatch_policy == NETISR_DISPATCH_DEFERRED)
|
|
return (netisr_queue_src(proto, source, m));
|
|
|
|
/*
|
|
* If direct dispatch is forced, then unconditionally dispatch
|
|
* without a formal CPU selection. Borrow the current CPU's stats,
|
|
* even if there's no worker on it. In this case we don't update
|
|
* nws_flags because all netisr processing will be source ordered due
|
|
* to always being forced to directly dispatch.
|
|
*/
|
|
if (dispatch_policy == NETISR_DISPATCH_DIRECT) {
|
|
nwsp = DPCPU_PTR(nws);
|
|
npwp = &nwsp->nws_work[proto];
|
|
npwp->nw_dispatched++;
|
|
npwp->nw_handled++;
|
|
netisr_proto[proto].np_handler(m);
|
|
error = 0;
|
|
goto out_unlock;
|
|
}
|
|
|
|
KASSERT(dispatch_policy == NETISR_DISPATCH_HYBRID,
|
|
("%s: unknown dispatch policy (%u)", __func__, dispatch_policy));
|
|
|
|
/*
|
|
* Otherwise, we execute in a hybrid mode where we will try to direct
|
|
* dispatch if we're on the right CPU and the netisr worker isn't
|
|
* already running.
|
|
*/
|
|
sched_pin();
|
|
m = netisr_select_cpuid(&netisr_proto[proto], NETISR_DISPATCH_HYBRID,
|
|
source, m, &cpuid);
|
|
if (m == NULL) {
|
|
error = ENOBUFS;
|
|
goto out_unpin;
|
|
}
|
|
KASSERT(!CPU_ABSENT(cpuid), ("%s: CPU %u absent", __func__, cpuid));
|
|
if (cpuid != curcpu)
|
|
goto queue_fallback;
|
|
nwsp = DPCPU_PTR(nws);
|
|
npwp = &nwsp->nws_work[proto];
|
|
|
|
/*-
|
|
* We are willing to direct dispatch only if three conditions hold:
|
|
*
|
|
* (1) The netisr worker isn't already running,
|
|
* (2) Another thread isn't already directly dispatching, and
|
|
* (3) The netisr hasn't already been woken up.
|
|
*/
|
|
NWS_LOCK(nwsp);
|
|
if (nwsp->nws_flags & (NWS_RUNNING | NWS_DISPATCHING | NWS_SCHEDULED)) {
|
|
error = netisr_queue_workstream(nwsp, proto, npwp, m,
|
|
&dosignal);
|
|
NWS_UNLOCK(nwsp);
|
|
if (dosignal)
|
|
NWS_SIGNAL(nwsp);
|
|
goto out_unpin;
|
|
}
|
|
|
|
/*
|
|
* The current thread is now effectively the netisr worker, so set
|
|
* the dispatching flag to prevent concurrent processing of the
|
|
* stream from another thread (even the netisr worker), which could
|
|
* otherwise lead to effective misordering of the stream.
|
|
*/
|
|
nwsp->nws_flags |= NWS_DISPATCHING;
|
|
NWS_UNLOCK(nwsp);
|
|
netisr_proto[proto].np_handler(m);
|
|
NWS_LOCK(nwsp);
|
|
nwsp->nws_flags &= ~NWS_DISPATCHING;
|
|
npwp->nw_handled++;
|
|
npwp->nw_hybrid_dispatched++;
|
|
|
|
/*
|
|
* If other work was enqueued by another thread while we were direct
|
|
* dispatching, we need to signal the netisr worker to do that work.
|
|
* In the future, we might want to do some of that work in the
|
|
* current thread, rather than trigger further context switches. If
|
|
* so, we'll want to establish a reasonable bound on the work done in
|
|
* the "borrowed" context.
|
|
*/
|
|
if (nwsp->nws_pendingbits != 0) {
|
|
nwsp->nws_flags |= NWS_SCHEDULED;
|
|
dosignal = 1;
|
|
} else
|
|
dosignal = 0;
|
|
NWS_UNLOCK(nwsp);
|
|
if (dosignal)
|
|
NWS_SIGNAL(nwsp);
|
|
error = 0;
|
|
goto out_unpin;
|
|
|
|
queue_fallback:
|
|
error = netisr_queue_internal(proto, m, cpuid);
|
|
out_unpin:
|
|
sched_unpin();
|
|
out_unlock:
|
|
#ifdef NETISR_LOCKING
|
|
NETISR_RUNLOCK(&tracker);
|
|
#endif
|
|
return (error);
|
|
}
|
|
|
|
int
|
|
netisr_dispatch(u_int proto, struct mbuf *m)
|
|
{
|
|
|
|
return (netisr_dispatch_src(proto, 0, m));
|
|
}
|
|
|
|
#ifdef DEVICE_POLLING
|
|
/*
|
|
* Kernel polling borrows a netisr thread to run interface polling in; this
|
|
* function allows kernel polling to request that the netisr thread be
|
|
* scheduled even if no packets are pending for protocols.
|
|
*/
|
|
void
|
|
netisr_sched_poll(void)
|
|
{
|
|
struct netisr_workstream *nwsp;
|
|
|
|
nwsp = DPCPU_ID_PTR(nws_array[0], nws);
|
|
NWS_SIGNAL(nwsp);
|
|
}
|
|
#endif
|
|
|
|
static void
|
|
netisr_start_swi(u_int cpuid, struct pcpu *pc)
|
|
{
|
|
char swiname[12];
|
|
struct netisr_workstream *nwsp;
|
|
int error;
|
|
|
|
KASSERT(!CPU_ABSENT(cpuid), ("%s: CPU %u absent", __func__, cpuid));
|
|
|
|
nwsp = DPCPU_ID_PTR(cpuid, nws);
|
|
mtx_init(&nwsp->nws_mtx, "netisr_mtx", NULL, MTX_DEF);
|
|
nwsp->nws_cpu = cpuid;
|
|
snprintf(swiname, sizeof(swiname), "netisr %u", cpuid);
|
|
error = swi_add(&nwsp->nws_intr_event, swiname, swi_net, nwsp,
|
|
SWI_NET, INTR_MPSAFE, &nwsp->nws_swi_cookie);
|
|
if (error)
|
|
panic("%s: swi_add %d", __func__, error);
|
|
pc->pc_netisr = nwsp->nws_intr_event;
|
|
if (netisr_bindthreads) {
|
|
error = intr_event_bind(nwsp->nws_intr_event, cpuid);
|
|
if (error != 0)
|
|
printf("%s: cpu %u: intr_event_bind: %d", __func__,
|
|
cpuid, error);
|
|
}
|
|
NETISR_WLOCK();
|
|
nws_array[nws_count] = nwsp->nws_cpu;
|
|
nws_count++;
|
|
NETISR_WUNLOCK();
|
|
}
|
|
|
|
/*
|
|
* Initialize the netisr subsystem. We rely on BSS and static initialization
|
|
* of most fields in global data structures.
|
|
*
|
|
* Start a worker thread for the boot CPU so that we can support network
|
|
* traffic immediately in case the network stack is used before additional
|
|
* CPUs are started (for example, diskless boot).
|
|
*/
|
|
static void
|
|
netisr_init(void *arg)
|
|
{
|
|
#ifdef EARLY_AP_STARTUP
|
|
struct pcpu *pc;
|
|
#endif
|
|
|
|
KASSERT(curcpu == 0, ("%s: not on CPU 0", __func__));
|
|
|
|
NETISR_LOCK_INIT();
|
|
if (netisr_maxthreads == 0 || netisr_maxthreads < -1 )
|
|
netisr_maxthreads = 1; /* default behavior */
|
|
else if (netisr_maxthreads == -1)
|
|
netisr_maxthreads = mp_ncpus; /* use max cpus */
|
|
if (netisr_maxthreads > mp_ncpus) {
|
|
printf("netisr_init: forcing maxthreads from %d to %d\n",
|
|
netisr_maxthreads, mp_ncpus);
|
|
netisr_maxthreads = mp_ncpus;
|
|
}
|
|
if (netisr_defaultqlimit > netisr_maxqlimit) {
|
|
printf("netisr_init: forcing defaultqlimit from %d to %d\n",
|
|
netisr_defaultqlimit, netisr_maxqlimit);
|
|
netisr_defaultqlimit = netisr_maxqlimit;
|
|
}
|
|
#ifdef DEVICE_POLLING
|
|
/*
|
|
* The device polling code is not yet aware of how to deal with
|
|
* multiple netisr threads, so for the time being compiling in device
|
|
* polling disables parallel netisr workers.
|
|
*/
|
|
if (netisr_maxthreads != 1 || netisr_bindthreads != 0) {
|
|
printf("netisr_init: forcing maxthreads to 1 and "
|
|
"bindthreads to 0 for device polling\n");
|
|
netisr_maxthreads = 1;
|
|
netisr_bindthreads = 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef EARLY_AP_STARTUP
|
|
STAILQ_FOREACH(pc, &cpuhead, pc_allcpu) {
|
|
if (nws_count >= netisr_maxthreads)
|
|
break;
|
|
netisr_start_swi(pc->pc_cpuid, pc);
|
|
}
|
|
#else
|
|
netisr_start_swi(curcpu, pcpu_find(curcpu));
|
|
#endif
|
|
}
|
|
SYSINIT(netisr_init, SI_SUB_SOFTINTR, SI_ORDER_FIRST, netisr_init, NULL);
|
|
|
|
#ifndef EARLY_AP_STARTUP
|
|
/*
|
|
* Start worker threads for additional CPUs. No attempt to gracefully handle
|
|
* work reassignment, we don't yet support dynamic reconfiguration.
|
|
*/
|
|
static void
|
|
netisr_start(void *arg)
|
|
{
|
|
struct pcpu *pc;
|
|
|
|
STAILQ_FOREACH(pc, &cpuhead, pc_allcpu) {
|
|
if (nws_count >= netisr_maxthreads)
|
|
break;
|
|
/* Worker will already be present for boot CPU. */
|
|
if (pc->pc_netisr != NULL)
|
|
continue;
|
|
netisr_start_swi(pc->pc_cpuid, pc);
|
|
}
|
|
}
|
|
SYSINIT(netisr_start, SI_SUB_SMP, SI_ORDER_MIDDLE, netisr_start, NULL);
|
|
#endif
|
|
|
|
/*
|
|
* Sysctl monitoring for netisr: query a list of registered protocols.
|
|
*/
|
|
static int
|
|
sysctl_netisr_proto(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct rm_priotracker tracker;
|
|
struct sysctl_netisr_proto *snpp, *snp_array;
|
|
struct netisr_proto *npp;
|
|
u_int counter, proto;
|
|
int error;
|
|
|
|
if (req->newptr != NULL)
|
|
return (EINVAL);
|
|
snp_array = malloc(sizeof(*snp_array) * NETISR_MAXPROT, M_TEMP,
|
|
M_ZERO | M_WAITOK);
|
|
counter = 0;
|
|
NETISR_RLOCK(&tracker);
|
|
for (proto = 0; proto < NETISR_MAXPROT; proto++) {
|
|
npp = &netisr_proto[proto];
|
|
if (npp->np_name == NULL)
|
|
continue;
|
|
snpp = &snp_array[counter];
|
|
snpp->snp_version = sizeof(*snpp);
|
|
strlcpy(snpp->snp_name, npp->np_name, NETISR_NAMEMAXLEN);
|
|
snpp->snp_proto = proto;
|
|
snpp->snp_qlimit = npp->np_qlimit;
|
|
snpp->snp_policy = npp->np_policy;
|
|
snpp->snp_dispatch = npp->np_dispatch;
|
|
if (npp->np_m2flow != NULL)
|
|
snpp->snp_flags |= NETISR_SNP_FLAGS_M2FLOW;
|
|
if (npp->np_m2cpuid != NULL)
|
|
snpp->snp_flags |= NETISR_SNP_FLAGS_M2CPUID;
|
|
if (npp->np_drainedcpu != NULL)
|
|
snpp->snp_flags |= NETISR_SNP_FLAGS_DRAINEDCPU;
|
|
counter++;
|
|
}
|
|
NETISR_RUNLOCK(&tracker);
|
|
KASSERT(counter <= NETISR_MAXPROT,
|
|
("sysctl_netisr_proto: counter too big (%d)", counter));
|
|
error = SYSCTL_OUT(req, snp_array, sizeof(*snp_array) * counter);
|
|
free(snp_array, M_TEMP);
|
|
return (error);
|
|
}
|
|
|
|
SYSCTL_PROC(_net_isr, OID_AUTO, proto,
|
|
CTLFLAG_RD|CTLTYPE_STRUCT|CTLFLAG_MPSAFE, 0, 0, sysctl_netisr_proto,
|
|
"S,sysctl_netisr_proto",
|
|
"Return list of protocols registered with netisr");
|
|
|
|
/*
|
|
* Sysctl monitoring for netisr: query a list of workstreams.
|
|
*/
|
|
static int
|
|
sysctl_netisr_workstream(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct rm_priotracker tracker;
|
|
struct sysctl_netisr_workstream *snwsp, *snws_array;
|
|
struct netisr_workstream *nwsp;
|
|
u_int counter, cpuid;
|
|
int error;
|
|
|
|
if (req->newptr != NULL)
|
|
return (EINVAL);
|
|
snws_array = malloc(sizeof(*snws_array) * MAXCPU, M_TEMP,
|
|
M_ZERO | M_WAITOK);
|
|
counter = 0;
|
|
NETISR_RLOCK(&tracker);
|
|
CPU_FOREACH(cpuid) {
|
|
nwsp = DPCPU_ID_PTR(cpuid, nws);
|
|
if (nwsp->nws_intr_event == NULL)
|
|
continue;
|
|
NWS_LOCK(nwsp);
|
|
snwsp = &snws_array[counter];
|
|
snwsp->snws_version = sizeof(*snwsp);
|
|
|
|
/*
|
|
* For now, we equate workstream IDs and CPU IDs in the
|
|
* kernel, but expose them independently to userspace in case
|
|
* that assumption changes in the future.
|
|
*/
|
|
snwsp->snws_wsid = cpuid;
|
|
snwsp->snws_cpu = cpuid;
|
|
if (nwsp->nws_intr_event != NULL)
|
|
snwsp->snws_flags |= NETISR_SNWS_FLAGS_INTR;
|
|
NWS_UNLOCK(nwsp);
|
|
counter++;
|
|
}
|
|
NETISR_RUNLOCK(&tracker);
|
|
KASSERT(counter <= MAXCPU,
|
|
("sysctl_netisr_workstream: counter too big (%d)", counter));
|
|
error = SYSCTL_OUT(req, snws_array, sizeof(*snws_array) * counter);
|
|
free(snws_array, M_TEMP);
|
|
return (error);
|
|
}
|
|
|
|
SYSCTL_PROC(_net_isr, OID_AUTO, workstream,
|
|
CTLFLAG_RD|CTLTYPE_STRUCT|CTLFLAG_MPSAFE, 0, 0, sysctl_netisr_workstream,
|
|
"S,sysctl_netisr_workstream",
|
|
"Return list of workstreams implemented by netisr");
|
|
|
|
/*
|
|
* Sysctl monitoring for netisr: query per-protocol data across all
|
|
* workstreams.
|
|
*/
|
|
static int
|
|
sysctl_netisr_work(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct rm_priotracker tracker;
|
|
struct sysctl_netisr_work *snwp, *snw_array;
|
|
struct netisr_workstream *nwsp;
|
|
struct netisr_proto *npp;
|
|
struct netisr_work *nwp;
|
|
u_int counter, cpuid, proto;
|
|
int error;
|
|
|
|
if (req->newptr != NULL)
|
|
return (EINVAL);
|
|
snw_array = malloc(sizeof(*snw_array) * MAXCPU * NETISR_MAXPROT,
|
|
M_TEMP, M_ZERO | M_WAITOK);
|
|
counter = 0;
|
|
NETISR_RLOCK(&tracker);
|
|
CPU_FOREACH(cpuid) {
|
|
nwsp = DPCPU_ID_PTR(cpuid, nws);
|
|
if (nwsp->nws_intr_event == NULL)
|
|
continue;
|
|
NWS_LOCK(nwsp);
|
|
for (proto = 0; proto < NETISR_MAXPROT; proto++) {
|
|
npp = &netisr_proto[proto];
|
|
if (npp->np_name == NULL)
|
|
continue;
|
|
nwp = &nwsp->nws_work[proto];
|
|
snwp = &snw_array[counter];
|
|
snwp->snw_version = sizeof(*snwp);
|
|
snwp->snw_wsid = cpuid; /* See comment above. */
|
|
snwp->snw_proto = proto;
|
|
snwp->snw_len = nwp->nw_len;
|
|
snwp->snw_watermark = nwp->nw_watermark;
|
|
snwp->snw_dispatched = nwp->nw_dispatched;
|
|
snwp->snw_hybrid_dispatched =
|
|
nwp->nw_hybrid_dispatched;
|
|
snwp->snw_qdrops = nwp->nw_qdrops;
|
|
snwp->snw_queued = nwp->nw_queued;
|
|
snwp->snw_handled = nwp->nw_handled;
|
|
counter++;
|
|
}
|
|
NWS_UNLOCK(nwsp);
|
|
}
|
|
KASSERT(counter <= MAXCPU * NETISR_MAXPROT,
|
|
("sysctl_netisr_work: counter too big (%d)", counter));
|
|
NETISR_RUNLOCK(&tracker);
|
|
error = SYSCTL_OUT(req, snw_array, sizeof(*snw_array) * counter);
|
|
free(snw_array, M_TEMP);
|
|
return (error);
|
|
}
|
|
|
|
SYSCTL_PROC(_net_isr, OID_AUTO, work,
|
|
CTLFLAG_RD|CTLTYPE_STRUCT|CTLFLAG_MPSAFE, 0, 0, sysctl_netisr_work,
|
|
"S,sysctl_netisr_work",
|
|
"Return list of per-workstream, per-protocol work in netisr");
|
|
|
|
#ifdef DDB
|
|
DB_SHOW_COMMAND(netisr, db_show_netisr)
|
|
{
|
|
struct netisr_workstream *nwsp;
|
|
struct netisr_work *nwp;
|
|
int first, proto;
|
|
u_int cpuid;
|
|
|
|
db_printf("%3s %6s %5s %5s %5s %8s %8s %8s %8s\n", "CPU", "Proto",
|
|
"Len", "WMark", "Max", "Disp", "HDisp", "Drop", "Queue");
|
|
CPU_FOREACH(cpuid) {
|
|
nwsp = DPCPU_ID_PTR(cpuid, nws);
|
|
if (nwsp->nws_intr_event == NULL)
|
|
continue;
|
|
first = 1;
|
|
for (proto = 0; proto < NETISR_MAXPROT; proto++) {
|
|
if (netisr_proto[proto].np_handler == NULL)
|
|
continue;
|
|
nwp = &nwsp->nws_work[proto];
|
|
if (first) {
|
|
db_printf("%3d ", cpuid);
|
|
first = 0;
|
|
} else
|
|
db_printf("%3s ", "");
|
|
db_printf(
|
|
"%6s %5d %5d %5d %8ju %8ju %8ju %8ju\n",
|
|
netisr_proto[proto].np_name, nwp->nw_len,
|
|
nwp->nw_watermark, nwp->nw_qlimit,
|
|
nwp->nw_dispatched, nwp->nw_hybrid_dispatched,
|
|
nwp->nw_qdrops, nwp->nw_queued);
|
|
}
|
|
}
|
|
}
|
|
#endif
|