freebsd-dev/sys/dev
Rafal Jaworowski 6b7ba54456 Initial support for Freescale PowerQUICC III MPC85xx system-on-chip family.
The PQ3 is a high performance integrated communications processing system
based on the e500 core, which is an embedded RISC processor that implements
the 32-bit Book E definition of the PowerPC architecture. For details refer
to: http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPC8555E

This port was tested and successfully run on the following members of the PQ3
family: MPC8533, MPC8541, MPC8548, MPC8555.

The following major integrated peripherals are supported:

  * On-chip peripherals bus
  * OpenPIC interrupt controller
  * UART
  * Ethernet (TSEC)
  * Host/PCI bridge
  * QUICC engine (SCC functionality)

This commit brings the main functionality and will be followed by individual
drivers that are logically separate from this base.

Approved by:	cognet (mentor)
Obtained from:	Juniper, Semihalf
MFp4:		e500
2008-03-03 17:17:00 +00:00
..
aac Avoid holding the aac_io_lock over copyout. 2007-12-20 21:13:58 +00:00
acpi_support Don't attach to the "IBM0057" ID. This ID is used by IBM machines for 2007-10-25 17:30:18 +00:00
acpica Create a thread to handle passive cooling for 1st zone which has _PSV, 2008-02-16 07:15:34 +00:00
adlink Set D_NEEDGIANT. 2007-08-04 17:43:11 +00:00
advansys Prepare for future integration between CAM and newbus. xpt_bus_register 2007-06-17 05:55:54 +00:00
agp Add the 845M GMCH controller. 2007-11-26 18:17:07 +00:00
aha Prepare for future integration between CAM and newbus. xpt_bus_register 2007-06-17 05:55:54 +00:00
ahb Fix a compile error from the last change. 2007-06-17 15:21:09 +00:00
aic Prepare for future integration between CAM and newbus. xpt_bus_register 2007-06-17 05:55:54 +00:00
aic7xxx Only print sense data diagnostics if debugging is enabled with the 2008-02-17 16:00:36 +00:00
amd Prepare for future integration between CAM and newbus. xpt_bus_register 2007-06-17 05:55:54 +00:00
amr Remove an errant definition for AMR_CONFIG_ENQ3_SOLICITED NOTIFY that was 2008-02-06 14:26:31 +00:00
an Style changes from avatar. 2008-01-18 16:34:18 +00:00
ar
arcmsr Fix an incorrect FreeBSD version test. 2007-12-09 19:24:27 +00:00
arl
asmc Move ASMC_FAN_FUNCS in the Macmini structure declaration one line up 2007-11-22 23:38:24 +00:00
asr Prepare for future integration between CAM and newbus. xpt_bus_register 2007-06-17 05:55:54 +00:00
ata If the disk reports that it support the Compact Flash Association command 2008-01-02 20:33:54 +00:00
ath promote ath_defrag to m_collapse (and retire private+unused 2008-01-17 21:25:09 +00:00
atkbdc Some PS/2 mice (at least the A4Tech X-7xx) need to be set to Intelli mode 2008-02-25 13:57:18 +00:00
auxio
awi o add 802.11 state machine states for DFS and client-side power save 2007-09-05 21:31:32 +00:00
bce MFC after: 4 weeks 2008-02-22 00:46:22 +00:00
bfe Fix link state handling in bfe(4). 2008-01-29 02:15:11 +00:00
bge Add a flag for Ethernet@WireSpeed capability and correct chip revisions. 2008-01-18 22:09:50 +00:00
bktr Rename the kthread_xxx (e.g. kthread_create()) calls 2007-10-20 23:23:23 +00:00
buslogic Prepare for future integration between CAM and newbus. xpt_bus_register 2007-06-17 05:55:54 +00:00
cardbus Make the PCI code aware of PCI domains (aka PCI segments) so we can 2007-09-30 11:05:18 +00:00
ce First in a series of changes to remove the now-unused Giant compatibility 2007-07-27 11:59:57 +00:00
ciss Add `hw.ciss.nop_message_heartbeat' tunable (default disabled) for 2008-02-10 06:21:52 +00:00
cm Spelling fix for interupt -> interrupt 2007-10-12 06:03:46 +00:00
cnw
coretemp Don't attach to non Core CPUs. This is needed because on the PIII, 2008-02-14 14:14:59 +00:00
cp First in a series of changes to remove the now-unused Giant compatibility 2007-07-27 11:59:57 +00:00
cpufreq
cs
ct
ctau Spelling fix for interupt -> interrupt 2007-10-12 06:03:46 +00:00
cx Spelling fix for interupt -> interrupt 2007-10-12 06:03:46 +00:00
cxgb Parameterize for module name 2008-02-26 23:12:55 +00:00
cy
dc Fix function prototype for device_shutdown method. 2007-11-22 02:45:00 +00:00
dcons Add a new 'why' argument to kdb_enter(), and a set of constants to use 2007-12-25 17:52:02 +00:00
de The maxsegsz of a dma tag created in de(4) is TULIP_DATA_PER_DESC bytes. 2007-06-07 00:28:47 +00:00
digi
dpt Prepare for future integration between CAM and newbus. xpt_bus_register 2007-06-17 05:55:54 +00:00
drm Add support for the 965GM. 2008-02-27 10:14:57 +00:00
ed Add Winbond W89C940F to the list. Also, stub in some entries for two 2007-12-31 03:29:02 +00:00
eisa
em Need to add define of FAST interrupts as default 2008-02-29 22:38:12 +00:00
en Where I previously removed calls to kdb_enter(), now remove include of 2007-05-29 11:28:28 +00:00
ep
esp The ESP driver isn't really MPSAFE, so don't mark it that it is. 2007-11-11 14:45:35 +00:00
ex s/destory/destroy/ (except for the code in contrib/). 2007-04-16 12:31:35 +00:00
exca
fatm
fb Replace explicit calls to video methods with their respective variants 2007-12-29 23:26:59 +00:00
fdc The wakeup() line from the rev. 1.319 is wrong and reintroduces 2008-01-11 16:50:52 +00:00
fe
firewire Rename the kthread_xxx (e.g. kthread_create()) calls 2007-10-20 23:23:23 +00:00
flash Rename the kthread_xxx (e.g. kthread_create()) calls 2007-10-20 23:23:23 +00:00
fxp Remove the volatile qualifier to apply to fxp_miibus_readreg(). 2007-05-30 03:46:04 +00:00
gem - Retire npe_defrag(), gem_defrag(), msk_defrag(), nfe_defrag(), and 2008-01-17 23:37:47 +00:00
harp
hatm Give MEXTADD() another argument to make both void pointers to the 2008-02-01 19:36:27 +00:00
hfa
hifn
hme Remove invalid BUS_DMA_ALLOCNOW when creating a tag which is used for 2007-05-01 11:50:11 +00:00
hptiop Update the hptiop driver to version 1.3. This adds support for the 4xxx 2008-02-03 16:07:12 +00:00
hptmv Rename the kthread_xxx (e.g. kthread_create()) calls 2007-10-20 23:23:23 +00:00
hptrr Fix a symbol conflict between hptrr and hptmv 2008-02-06 05:33:17 +00:00
hwpmc VOP_LOCK1() (and so VOP_LOCK()) and VOP_UNLOCK() are only used in 2008-01-13 14:44:15 +00:00
ic
ichsmb Add the Intel 82801FB (ICH6) SMBus controller and the 2007-11-26 19:54:54 +00:00
ichwd Add support for ICH8M. 2008-01-07 09:46:39 +00:00
ida
idt Spelling fix for interupt -> interrupt 2007-10-12 06:03:46 +00:00
ie
ieee488
if_ndis Use pause(9) instead of a tsleep() on a stack variable. 2008-01-17 20:11:58 +00:00
igb Change data formating in debug code. 2008-03-01 08:23:35 +00:00
iicbus Don't use spinlocks here. The iicbus transactions can take a long 2007-04-17 05:48:35 +00:00
iir Fix a buffer overflow in the processing of various SCSI commands. This likely 2008-01-09 20:02:56 +00:00
io
ipmi Rename the kthread_xxx (e.g. kthread_create()) calls 2007-10-20 23:23:23 +00:00
ips
ipw Plug two potential (root-only, local) information leaks. buf is not 2007-12-05 19:32:07 +00:00
iscsi/initiator Give MEXTADD() another argument to make both void pointers to the 2008-02-01 19:36:27 +00:00
isp Add missing locking for SBus controllers. 2007-11-05 11:22:18 +00:00
ispfw
iwi Plug two potential (root-only, local) information leaks. buf is not 2007-12-05 19:32:07 +00:00
ixgb
ixgbe This is an update to the new Intel 10G 82598 driver. 2007-09-04 02:31:35 +00:00
joy
kbd Remove explicit calls to keyboard methods with their respective variants 2007-12-29 21:55:25 +00:00
kbdmux Remove explicit calls to keyboard methods with their respective variants 2007-12-29 21:55:25 +00:00
le Correct the comments in am7990_intr() and am79900_intr(); it's not 2007-12-30 00:23:38 +00:00
led Make it possible to specify an initial state for the LED. 2007-04-23 12:42:15 +00:00
lge Give MEXTADD() another argument to make both void pointers to the 2008-02-01 19:36:27 +00:00
lmc Universally adopt most conventional spelling of acquire. 2007-05-27 20:50:23 +00:00
mc146818 Export mc146818_def_{read,write}() so the front-end can make use 2007-06-16 23:10:00 +00:00
mca
mcd
md Zero sc->vnode if mdsetcred() fails. 2008-02-28 18:31:54 +00:00
mem
mfi Fix some bugs in dealing with DCMD'd without data. MegaCli was sending 2008-02-02 17:29:28 +00:00
mii - Fix a typo in a comment. 2008-01-27 01:30:02 +00:00
mk48txx
mlx
mly Prepare for future integration between CAM and newbus. xpt_bus_register 2007-06-17 05:55:54 +00:00
mmc Rename the kthread_xxx (e.g. kthread_create()) calls 2007-10-20 23:23:23 +00:00
mpt Ever since the module registration system was introduced to this driver, 2007-11-03 17:33:41 +00:00
mse
msk Workaround GMAC hardware hang of Yukon II on the receipt of pause 2008-02-29 03:38:12 +00:00
mxge Now that mxge supports MSI-X interrupts, reverse the logic and flag 2008-02-14 16:24:14 +00:00
my Spelling fix for interupt -> interrupt 2007-10-12 06:03:46 +00:00
ncv
nfe Give MEXTADD() another argument to make both void pointers to the 2008-02-01 19:36:27 +00:00
nge Fix function prototype for device_shutdown method. 2007-11-22 02:45:00 +00:00
nmdm Call ttyld_close() in nmdmclose() to ensure that nmdm(4) 2007-08-01 21:38:11 +00:00
nsp
null
nve Fix function prototype for device_shutdown method. 2007-11-22 02:45:00 +00:00
nvram Split /dev/nvram driver out of isa/clock.c for i386 and amd64. I have not 2007-10-26 03:23:54 +00:00
nxge Merge Neterion if_nxge driver version 2.0.9.11230 with the following 2007-10-29 14:19:32 +00:00
ofw Add a new 'why' argument to kdb_enter(), and a set of constants to use 2007-12-25 17:52:02 +00:00
patm Give MEXTADD() another argument to make both void pointers to the 2008-02-01 19:36:27 +00:00
pbio
pccard Bring in some new Sierra Wireless drivers running under pccard. 2007-10-12 08:26:15 +00:00
pccbb Rename the kthread_xxx (e.g. kthread_create()) calls 2007-10-20 23:23:23 +00:00
pcf
pci Relax the check for a PCI-express chipset by assuming the system is a 2008-02-01 20:31:09 +00:00
pdq Fix preprocessor code to check for a symbol being defined prior to checking 2007-06-08 01:49:04 +00:00
powermac_nvram Redefine bus_space_tag_t on PowerPC from a 32-bit integral to 2007-12-19 18:00:50 +00:00
ppbus Work around problems with the ppbus(4)'s interesting way of managing 2008-01-10 23:43:47 +00:00
ppc
pst
puc o Add Moxa Technologies CP-104EL PCI Express 4 port Serial card. 2008-01-12 19:14:29 +00:00
ral Various bug fixes for 2560 parts of ral(4): 2008-02-03 11:47:38 +00:00
random Correct a random value disclosure in random(4). 2007-11-29 16:06:12 +00:00
ray add defs just removed from ieee80211.h 2007-09-05 21:25:58 +00:00
rc
re Don't map memory/IO resource in device probe and just use PCI 2008-03-03 04:15:08 +00:00
rndtest
rp Initialize DWBuf[3]. 2007-07-05 06:51:49 +00:00
safe bandaid crash as I have no time to research the issue and the driver 2007-11-03 19:10:14 +00:00
sbni Quiet framelen uninitialized warning. I think it was a false alarm. 2007-07-05 07:46:33 +00:00
sbsh Propagae volatile qualifier. 2007-06-08 01:54:22 +00:00
scc
scd
sf Fix build. 2008-01-21 09:51:28 +00:00
si Based in info gleaned from the web and other drivers (including the Linux 2007-12-01 20:39:47 +00:00
sio Add a new 'why' argument to kdb_enter(), and a set of constants to use 2007-12-25 17:52:02 +00:00
sk Prefer NULL over integer 0 for pointer type. 2008-02-14 01:25:01 +00:00
smbus
sn
snc
snp Move the check for the snp device being already attached after the 2007-12-24 13:47:16 +00:00
sound Limit total hardware playback channels to just 1. The reliability of 2007-12-14 02:16:26 +00:00
speaker Now that tone & delay times are correct (independent of hz), adjust 2007-06-04 09:27:13 +00:00
spibus
sr
stg
stge Use m_collapse(9) to collapse mbuf chains instead of relying on 2008-01-18 08:32:08 +00:00
streams Make ftruncate a 'struct file' operation rather than a vnode operation. 2008-01-07 20:05:19 +00:00
sym Fix Symbios driver on amd64: Since amd64 has 64 bit pointers but the same 2007-07-20 23:02:01 +00:00
syscons Mark the syscons video spin mutex as recursable since it is currently 2008-02-13 23:38:08 +00:00
tdfx
ti Set the baudrate for if_ti. 2008-02-19 20:54:42 +00:00
trm Prepare for future integration between CAM and newbus. xpt_bus_register 2007-06-17 05:55:54 +00:00
twa Deferred interrupts don't work yet, disable them. 2007-10-12 16:51:22 +00:00
twe Add missing \n. 2008-02-12 08:58:26 +00:00
tx
txp Read MII_ANAR register and get common denominator ability. 2007-11-16 10:32:10 +00:00
uart Initial support for Freescale PowerQUICC III MPC85xx system-on-chip family. 2008-03-03 17:17:00 +00:00
ubsec
usb - Handle buffer lock waiters count directly in the buffer cache instead 2008-03-01 19:47:50 +00:00
utopia Fix a use-after-free. 2007-12-05 19:32:59 +00:00
vge Fix function prototype for device_shutdown method. 2007-11-22 02:45:00 +00:00
vkbd Remove explicit calls to keyboard methods with their respective variants 2007-12-29 21:55:25 +00:00
vr Fix function prototype for device_shutdown method. 2007-11-22 02:45:00 +00:00
vx Fix function prototype for device_shutdown method. 2007-11-22 02:45:00 +00:00
watchdog
wds Prepare for future integration between CAM and newbus. xpt_bus_register 2007-06-17 05:55:54 +00:00
wi Make wi_set_channel() actually change the channel in hardware so that hostap 2007-09-16 20:02:29 +00:00
wl
wpi Give MEXTADD() another argument to make both void pointers to the 2008-02-01 19:36:27 +00:00
xe