freebsd-dev/sys/contrib/octeon-sdk/cvmx-helper-errata.c
Juli Mallett dc4ee6ca91 Merge the Cavium Octeon SDK 2.3.0 Simple Executive code and update FreeBSD to
make use of it where possible.

This primarily brings in support for newer hardware, and FreeBSD is not yet
able to support the abundance of IRQs on new hardware and many features in the
Ethernet driver.

Because of the changes to IRQs in the Simple Executive, we have to maintain our
own list of Octeon IRQs now, which probably can be pared-down and be specific
to the CIU interrupt unit soon, and when other interrupt mechanisms are added
they can maintain their own definitions.

Remove unmasking of interrupts from within the UART device now that the
function used is no longer present in the Simple Executive.  The unmasking
seems to have been gratuitous as this is more properly handled by the buses
above the UART device, and seems to work on that basis.
2012-03-11 06:17:49 +00:00

330 lines
12 KiB
C

/***********************license start***************
* Copyright (c) 2003-2010 Cavium Inc. (support@cavium.com). All rights
* reserved.
*
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* * Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
* * Neither the name of Cavium Inc. nor the names of
* its contributors may be used to endorse or promote products
* derived from this software without specific prior written
* permission.
* This Software, including technical data, may be subject to U.S. export control
* laws, including the U.S. Export Administration Act and its associated
* regulations, and may be subject to export or import regulations in other
* countries.
* TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
* AND WITH ALL FAULTS AND CAVIUM INC. MAKES NO PROMISES, REPRESENTATIONS OR
* WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
* THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR
* DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
* SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
* MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
* VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
* CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR
* PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
***********************license end**************************************/
/**
* @file
*
* Fixes and workaround for Octeon chip errata. This file
* contains functions called by cvmx-helper to workaround known
* chip errata. For the most part, code doesn't need to call
* these functions directly.
*
* <hr>$Revision: 70030 $<hr>
*/
#ifdef CVMX_BUILD_FOR_LINUX_KERNEL
#include <asm/octeon/cvmx.h>
#include <asm/octeon/cvmx-helper.h>
#include <asm/octeon/cvmx-helper-jtag.h>
#include <asm/octeon/cvmx-pko.h>
#include <asm/octeon/cvmx-asxx-defs.h>
#include <asm/octeon/cvmx-gmxx-defs.h>
#else
#if !defined(__FreeBSD__) || !defined(_KERNEL)
#include "executive-config.h"
#include "cvmx-config.h"
#endif
#include "cvmx.h"
#include "cvmx-fpa.h"
#include "cvmx-pip.h"
#include "cvmx-pko.h"
#include "cvmx-ipd.h"
#include "cvmx-gmx.h"
#include "cvmx-spi.h"
#include "cvmx-pow.h"
#include "cvmx-sysinfo.h"
#include "cvmx-helper.h"
#include "cvmx-helper-jtag.h"
#endif
#ifdef CVMX_ENABLE_PKO_FUNCTIONS
/**
* @INTERNAL
* Function to adjust internal IPD pointer alignments
*
* @return 0 on success
* !0 on failure
*/
int __cvmx_helper_errata_fix_ipd_ptr_alignment(void)
{
#define FIX_IPD_FIRST_BUFF_PAYLOAD_BYTES (CVMX_FPA_PACKET_POOL_SIZE-8-CVMX_HELPER_FIRST_MBUFF_SKIP)
#define FIX_IPD_NON_FIRST_BUFF_PAYLOAD_BYTES (CVMX_FPA_PACKET_POOL_SIZE-8-CVMX_HELPER_NOT_FIRST_MBUFF_SKIP)
#define FIX_IPD_OUTPORT 0
#define INTERFACE(port) (port >> 4) /* Ports 0-15 are interface 0, 16-31 are interface 1 */
#define INDEX(port) (port & 0xf)
uint64_t *p64;
cvmx_pko_command_word0_t pko_command;
cvmx_buf_ptr_t g_buffer, pkt_buffer;
cvmx_wqe_t *work;
int size, num_segs = 0, wqe_pcnt, pkt_pcnt;
cvmx_gmxx_prtx_cfg_t gmx_cfg;
int retry_cnt;
int retry_loop_cnt;
int i;
cvmx_helper_link_info_t link_info;
/* Save values for restore at end */
uint64_t prtx_cfg = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT)));
uint64_t tx_ptr_en = cvmx_read_csr(CVMX_ASXX_TX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT)));
uint64_t rx_ptr_en = cvmx_read_csr(CVMX_ASXX_RX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT)));
uint64_t rxx_jabber = cvmx_read_csr(CVMX_GMXX_RXX_JABBER(INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT)));
uint64_t frame_max = cvmx_read_csr(CVMX_GMXX_RXX_FRM_MAX(INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT)));
/* Configure port to gig FDX as required for loopback mode */
cvmx_helper_rgmii_internal_loopback(FIX_IPD_OUTPORT);
/* Disable reception on all ports so if traffic is present it will not interfere. */
cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT)), 0);
cvmx_wait(100000000ull);
for (retry_loop_cnt = 0;retry_loop_cnt < 10;retry_loop_cnt++)
{
retry_cnt = 100000;
wqe_pcnt = cvmx_read_csr(CVMX_IPD_PTR_COUNT);
pkt_pcnt = (wqe_pcnt >> 7) & 0x7f;
wqe_pcnt &= 0x7f;
num_segs = (2 + pkt_pcnt - wqe_pcnt) & 3;
if (num_segs == 0)
goto fix_ipd_exit;
num_segs += 1;
size = FIX_IPD_FIRST_BUFF_PAYLOAD_BYTES + ((num_segs-1)*FIX_IPD_NON_FIRST_BUFF_PAYLOAD_BYTES) -
(FIX_IPD_NON_FIRST_BUFF_PAYLOAD_BYTES / 2);
cvmx_write_csr(CVMX_ASXX_PRT_LOOP(INTERFACE(FIX_IPD_OUTPORT)), 1 << INDEX(FIX_IPD_OUTPORT));
CVMX_SYNC;
g_buffer.u64 = 0;
g_buffer.s.addr = cvmx_ptr_to_phys(cvmx_fpa_alloc(CVMX_FPA_WQE_POOL));
if (g_buffer.s.addr == 0) {
cvmx_dprintf("WARNING: FIX_IPD_PTR_ALIGNMENT buffer allocation failure.\n");
goto fix_ipd_exit;
}
g_buffer.s.pool = CVMX_FPA_WQE_POOL;
g_buffer.s.size = num_segs;
pkt_buffer.u64 = 0;
pkt_buffer.s.addr = cvmx_ptr_to_phys(cvmx_fpa_alloc(CVMX_FPA_PACKET_POOL));
if (pkt_buffer.s.addr == 0) {
cvmx_dprintf("WARNING: FIX_IPD_PTR_ALIGNMENT buffer allocation failure.\n");
goto fix_ipd_exit;
}
pkt_buffer.s.i = 1;
pkt_buffer.s.pool = CVMX_FPA_PACKET_POOL;
pkt_buffer.s.size = FIX_IPD_FIRST_BUFF_PAYLOAD_BYTES;
p64 = (uint64_t*) cvmx_phys_to_ptr(pkt_buffer.s.addr);
p64[0] = 0xffffffffffff0000ull;
p64[1] = 0x08004510ull;
p64[2] = ((uint64_t)(size-14) << 48) | 0x5ae740004000ull;
p64[3] = 0x3a5fc0a81073c0a8ull;
for (i=0;i<num_segs;i++)
{
if (i>0)
pkt_buffer.s.size = FIX_IPD_NON_FIRST_BUFF_PAYLOAD_BYTES;
if (i==(num_segs-1))
pkt_buffer.s.i = 0;
*(uint64_t*)cvmx_phys_to_ptr(g_buffer.s.addr + 8*i) = pkt_buffer.u64;
}
/* Build the PKO command */
pko_command.u64 = 0;
pko_command.s.segs = num_segs;
pko_command.s.total_bytes = size;
pko_command.s.dontfree = 0;
pko_command.s.gather = 1;
gmx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT)));
gmx_cfg.s.en = 1;
cvmx_write_csr(CVMX_GMXX_PRTX_CFG(INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT)), gmx_cfg.u64);
cvmx_write_csr(CVMX_ASXX_TX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT)), 1 << INDEX(FIX_IPD_OUTPORT));
cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT)), 1 << INDEX(FIX_IPD_OUTPORT));
cvmx_write_csr(CVMX_GMXX_RXX_JABBER(INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT)), 65392-14-4);
cvmx_write_csr(CVMX_GMXX_RXX_FRM_MAX(INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT)), 65392-14-4);
cvmx_pko_send_packet_prepare(FIX_IPD_OUTPORT, cvmx_pko_get_base_queue(FIX_IPD_OUTPORT), CVMX_PKO_LOCK_CMD_QUEUE);
cvmx_pko_send_packet_finish(FIX_IPD_OUTPORT, cvmx_pko_get_base_queue(FIX_IPD_OUTPORT), pko_command, g_buffer, CVMX_PKO_LOCK_CMD_QUEUE);
CVMX_SYNC;
do {
work = cvmx_pow_work_request_sync(CVMX_POW_WAIT);
retry_cnt--;
} while ((work == NULL) && (retry_cnt > 0));
if (!retry_cnt)
cvmx_dprintf("WARNING: FIX_IPD_PTR_ALIGNMENT get_work() timeout occurred.\n");
/* Free packet */
if (work)
cvmx_helper_free_packet_data(work);
}
fix_ipd_exit:
/* Return CSR configs to saved values */
cvmx_write_csr(CVMX_GMXX_PRTX_CFG(INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT)), prtx_cfg);
cvmx_write_csr(CVMX_ASXX_TX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT)), tx_ptr_en);
cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT)), rx_ptr_en);
cvmx_write_csr(CVMX_GMXX_RXX_JABBER(INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT)), rxx_jabber);
cvmx_write_csr(CVMX_GMXX_RXX_FRM_MAX(INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT)), frame_max);
cvmx_write_csr(CVMX_ASXX_PRT_LOOP(INTERFACE(FIX_IPD_OUTPORT)), 0);
link_info.u64 = 0; /* Set link to down so autonegotiation will set it up again */
cvmx_helper_link_set(FIX_IPD_OUTPORT, link_info);
/* Bring the link back up as autonegotiation is not done in user applications. */
cvmx_helper_link_autoconf(FIX_IPD_OUTPORT);
CVMX_SYNC;
if (num_segs)
cvmx_dprintf("WARNING: FIX_IPD_PTR_ALIGNMENT failed.\n");
return(!!num_segs);
}
/**
* This function needs to be called on all Octeon chips with
* errata PKI-100.
*
* The Size field is 8 too large in WQE and next pointers
*
* The Size field generated by IPD is 8 larger than it should
* be. The Size field is <55:40> of both:
* - WORD3 in the work queue entry, and
* - the next buffer pointer (which precedes the packet data
* in each buffer).
*
* @param work Work queue entry to fix
* @return Zero on success. Negative on failure
*/
int cvmx_helper_fix_ipd_packet_chain(cvmx_wqe_t *work)
{
uint64_t number_buffers = work->word2.s.bufs;
/* We only need to do this if the work has buffers */
if (number_buffers)
{
cvmx_buf_ptr_t buffer_ptr = work->packet_ptr;
/* Check for errata PKI-100 */
if ( (buffer_ptr.s.pool == 0) && (((uint64_t)buffer_ptr.s.size +
((uint64_t)buffer_ptr.s.back << 7) + ((uint64_t)buffer_ptr.s.addr & 0x7F))
!= (CVMX_FPA_PACKET_POOL_SIZE+8))) {
/* fix is not needed */
return 0;
}
/* Decrement the work packet pointer */
buffer_ptr.s.size -= 8;
work->packet_ptr = buffer_ptr;
/* Now loop through decrementing the size for each additional buffer */
while (--number_buffers)
{
/* Chain pointers are 8 bytes before the data */
cvmx_buf_ptr_t *ptr = (cvmx_buf_ptr_t*)cvmx_phys_to_ptr(buffer_ptr.s.addr - 8);
buffer_ptr = *ptr;
buffer_ptr.s.size -= 8;
*ptr = buffer_ptr;
}
}
/* Make sure that these write go out before other operations such as FPA frees */
CVMX_SYNCWS;
return 0;
}
#endif /* CVMX_ENABLE_PKO_FUNCTIONS */
/**
* Due to errata G-720, the 2nd order CDR circuit on CN52XX pass
* 1 doesn't work properly. The following code disables 2nd order
* CDR for the specified QLM.
*
* @param qlm QLM to disable 2nd order CDR for.
*/
void __cvmx_helper_errata_qlm_disable_2nd_order_cdr(int qlm)
{
int lane;
/* Apply the workaround only once. */
cvmx_ciu_qlm_jtgd_t qlm_jtgd;
qlm_jtgd.u64 = cvmx_read_csr(CVMX_CIU_QLM_JTGD);
if (qlm_jtgd.s.select != 0)
return;
cvmx_helper_qlm_jtag_init();
/* We need to load all four lanes of the QLM, a total of 1072 bits */
for (lane=0; lane<4; lane++)
{
/* Each lane has 268 bits. We need to set cfg_cdr_incx<67:64>=3 and
cfg_cdr_secord<77>=1. All other bits are zero. Bits go in LSB
first, so start off with the zeros for bits <63:0> */
cvmx_helper_qlm_jtag_shift_zeros(qlm, 63 - 0 + 1);
/* cfg_cdr_incx<67:64>=3 */
cvmx_helper_qlm_jtag_shift(qlm, 67 - 64 + 1, 3);
/* Zeros for bits <76:68> */
cvmx_helper_qlm_jtag_shift_zeros(qlm, 76 - 68 + 1);
/* cfg_cdr_secord<77>=1 */
cvmx_helper_qlm_jtag_shift(qlm, 77 - 77 + 1, 1);
/* Zeros for bits <267:78> */
cvmx_helper_qlm_jtag_shift_zeros(qlm, 267 - 78 + 1);
}
cvmx_helper_qlm_jtag_update(qlm);
}