freebsd-dev/sys/mips/conf/CARAMBOLA2
Adrian Chadd 82aa6e614b Add 8devices CARAMBOLA2 support.
This is based on the AR933x (Hornet) SoC from Qualcomm Atheros.

It's a much nicer board to do development on - 64MB RAM, 16MB flash.
The development board breaks out the GPIO pins, ethernet, serial (via
a USB<->RS232 chip), USB host and of course a small wifi antenna.

Everything but the wifi works thus far.
2013-06-08 20:21:17 +00:00

54 lines
1.1 KiB
Plaintext

#
# Carambola 2 - an AR933x based SoC wifi device.
#
# http://shop.8devices.com/wifi4things/carambola2
#
# * AR9330 SoC
# * 64MB RAM
# * 16MB flash
# * Integrated 1x1 2GHz wifi and 10/100 bridge
#
# $FreeBSD$
#
# Include the default AR933x parameters
include "AR933X_BASE"
ident CARAMBOLA2
# Override hints with board values
hints "CARAMBOLA2.hints"
# Board memory - 64MB
options AR71XX_REALMEM=(64*1024*1024)
# i2c GPIO bus
#device gpioiic
#device iicbb
#device iicbus
#device iic
# Options required for miiproxy and mdiobus
options ARGE_MDIO # Export an MDIO bus separate from arge
device miiproxy # MDIO bus <-> MII PHY rendezvous
device etherswitch
device arswitch
# read MSDOS formatted disks - USB
#options MSDOSFS
# Enable the uboot environment stuff rather then the
# redboot stuff.
options AR71XX_ENV_UBOOT
# uzip - to boot natively from flash
device geom_uncompress
options GEOM_UNCOMPRESS
# Used for the static uboot partition map
device geom_map
# Boot off of the rootfs, as defined in the geom_map setup.
options ROOTDEVNAME=\"ufs:map/rootfs.uncompress\"