Pyun YongHyeon 34fe3828ba Add Seeq Technology 80220 PHY support to smcphy(4). This PHY is ... found on Adaptec AIC-6915 Starfire ethernet controller. While here, use status register to know resolved speed/duplex. With this change, sf(4) correctly reports speed/duplex of established link. Reviewed by: marius		2012-02-23 01:20:21 +00:00
..
acphy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
acphyreg.h
amphy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
amphyreg.h
atphy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
atphyreg.h
axphy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
bmtphy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
bmtphyreg.h
brgphy.c	- Probe BCM57780.	2012-02-19 12:09:17 +00:00
brgphyreg.h	Correct spelling in comments.	2011-04-22 09:22:27 +00:00
ciphy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
ciphyreg.h	Correct spelling in comments.	2011-04-22 09:22:27 +00:00
e1000phy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
e1000phyreg.h	Correct spelling in comments.	2011-04-22 09:22:27 +00:00
gentbi.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
icsphy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
icsphyreg.h
ip1000phy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
ip1000phyreg.h
jmphy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
jmphyreg.h	Add support for JMicron JMC251/JMC261 Gigabit/Fast ethernet	2010-12-18 23:52:50 +00:00
lxtphy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
lxtphyreg.h
mii_bitbang.c	- Import the common MII bitbang'ing code from NetBSD and convert drivers to	2011-11-01 16:13:59 +00:00
mii_bitbang.h	- Import the common MII bitbang'ing code from NetBSD and convert drivers to	2011-11-01 16:13:59 +00:00
mii_physubr.c	r221812 reveals that at least some Broadcom PHYs default to being not only	2011-08-19 19:12:58 +00:00
mii.c	- In mii_attach(9) just set the driver for a newly added miibus(4) instance	2011-12-05 21:38:45 +00:00
mii.h	- Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP	2011-05-03 19:51:29 +00:00
miibus_if.m
miidevs	Probe the National DP83849, which is a dual-port version of the PHYTER.	2012-02-19 12:25:58 +00:00
miivar.h	There's no need export the device interface methods of miibus(4).	2011-11-18 22:58:13 +00:00
mlphy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
nsgphy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
nsgphyreg.h
nsphy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
nsphyreg.h
nsphyter.c	Probe the National DP83849, which is a dual-port version of the PHYTER.	2012-02-19 12:25:58 +00:00
nsphyterreg.h
pnaphy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
qsphy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
qsphyreg.h
rdcphy.c	s,KOBJMETHOD_END,DEVMETHOD_END,g in order to fully hide the explicit mention	2011-11-22 21:55:40 +00:00
rdcphyreg.h	Add RDC Semiconductor R6040 10/100 PHY driver.	2010-12-30 23:50:25 +00:00
rgephy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
rgephyreg.h	Correct spelling in comments.	2011-04-22 09:22:27 +00:00
rlphy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
rlswitch.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
smcphy.c	Add Seeq Technology 80220 PHY support to smcphy(4). This PHY is	2012-02-23 01:20:21 +00:00
tdkphy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
tdkphyreg.h
tlphy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
tlphyreg.h	- Remove clause 3 and 4 from TNF licenses.	2010-09-26 22:11:41 +00:00
truephy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
truephyreg.h
ukphy_subr.c	o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control	2010-11-14 13:26:10 +00:00
ukphy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
xmphy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
xmphyreg.h	Correct spelling in comments.	2011-04-22 09:22:27 +00:00