Adrian Chadd aacc74998a Fix 5ghz calibration logic when using AR9280 w/ fast clock. ... When the fast clock (44mhz) is enabled for 5ghz HT20, the dual ADCs aren't enabled. Trying to do the ADC calibrations here would result in calibration never completing; this resulted in IQ calibration never running and thus performance issues in 11a/11n HT20 mode. Leave it enabled for non-fastclock (40mhz) 11a mode and HT40 modes. This has been fixed in discussion with Felix Fietkau (nbd) and discussions with the Atheros baseband team. Linux ath9k now has a similar fix. Approved by: re (kib)		2011-09-06 10:54:56 +00:00
..
ar2133.c	Break out most of the HAL related tweaks into a per-HAL instance,	2011-06-23 02:38:36 +00:00
ar5416_ani.c	Fix ANI handling to work correctly when (trying) to receive radar errors.	2011-07-30 13:30:24 +00:00
ar5416_attach.c	Add another HAL method - ah_isFastClockEnabled - which returns AH_TRUE	2011-08-08 13:15:39 +00:00
ar5416_beacon.c	TIM/Timer fixes for AR5416 and later:	2011-08-24 00:45:53 +00:00
ar5416_cal_adcdc.c	Replace Id keyword with the FreeBSD keyword.	2010-01-29 10:07:17 +00:00
ar5416_cal_adcgain.c	Replace Id keyword with the FreeBSD keyword.	2010-01-29 10:07:17 +00:00
ar5416_cal_iq.c	Fix the calibration logic to correctly clamp the calculated coefficient.	2010-08-14 15:28:15 +00:00
ar5416_cal.c	Fix 5ghz calibration logic when using AR9280 w/ fast clock.	2011-09-06 10:54:56 +00:00
ar5416_cal.h	Introduce methods for the initial calibration and the new PA calibration	2011-03-11 11:35:36 +00:00
ar5416_eeprom.c	Replace Id keyword with the FreeBSD keyword.	2010-01-29 10:07:17 +00:00
ar5416_gpio.c	Add support for the AR9285 chipset, which is found on many netbooks	2010-01-29 10:10:14 +00:00
ar5416_interrupts.c	Introduce AR9130 (HOWL) WMAC support to the FreeBSD HAL.	2011-04-28 12:47:40 +00:00
ar5416_keycache.c	Replace Id keyword with the FreeBSD keyword.	2010-01-29 10:07:17 +00:00
ar5416_misc.c	Add another HAL method - ah_isFastClockEnabled - which returns AH_TRUE	2011-08-08 13:15:39 +00:00
ar5416_phy.c	Modify the AR5416 11na rate table to use 24mb OFDM 11a for control traffic,	2011-02-21 05:10:34 +00:00
ar5416_power.c	Fixes from Atheros:	2011-05-12 03:15:21 +00:00
ar5416_recv.c	Bring over AR5416 specific RX filter get/set routines.	2011-07-30 13:25:11 +00:00
ar5416_reset.c	Break out the PLL setup into (mostly) per-chip methods, rather than	2011-07-21 08:35:10 +00:00
ar5416_xmit.c	Break out most of the HAL related tweaks into a per-HAL instance,	2011-06-23 02:38:36 +00:00
ar5416.h	Add another HAL method - ah_isFastClockEnabled - which returns AH_TRUE	2011-08-08 13:15:39 +00:00
ar5416.ini	Fix the addac serial load register write for AR5416.	2011-09-06 10:49:05 +00:00
ar5416desc.h	Add in descriptions for TX descriptor fields ctl8-11 - these fields	2011-05-24 05:34:45 +00:00
ar5416phy.h	Add some missing DFS chipset functionality to the FreeBSD HAL.	2011-06-01 20:01:02 +00:00
ar5416reg.h	TIM/Timer fixes for AR5416 and later:	2011-08-24 00:45:53 +00:00