freebsd-dev/usr.sbin/bhyve/pci_virtio_block.c
Warner Losh 1d386b48a5 Remove $FreeBSD$: one-line .c pattern
Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/
2023-08-16 11:54:42 -06:00

603 lines
17 KiB
C

/*-
* SPDX-License-Identifier: BSD-2-Clause
*
* Copyright (c) 2011 NetApp, Inc.
* All rights reserved.
* Copyright 2020-2021 Joyent, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY NETAPP, INC ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL NETAPP, INC OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
#include <sys/param.h>
#include <sys/linker_set.h>
#include <sys/stat.h>
#include <sys/uio.h>
#include <sys/ioctl.h>
#include <sys/disk.h>
#include <machine/vmm_snapshot.h>
#include <errno.h>
#include <fcntl.h>
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <string.h>
#include <strings.h>
#include <unistd.h>
#include <assert.h>
#include <pthread.h>
#include <md5.h>
#include "bhyverun.h"
#include "config.h"
#include "debug.h"
#include "pci_emul.h"
#include "virtio.h"
#include "block_if.h"
#define VTBLK_BSIZE 512
#define VTBLK_RINGSZ 128
_Static_assert(VTBLK_RINGSZ <= BLOCKIF_RING_MAX, "Each ring entry must be able to queue a request");
#define VTBLK_S_OK 0
#define VTBLK_S_IOERR 1
#define VTBLK_S_UNSUPP 2
#define VTBLK_BLK_ID_BYTES 20 + 1
/* Capability bits */
#define VTBLK_F_BARRIER (1 << 0) /* Does host support barriers? */
#define VTBLK_F_SIZE_MAX (1 << 1) /* Indicates maximum segment size */
#define VTBLK_F_SEG_MAX (1 << 2) /* Indicates maximum # of segments */
#define VTBLK_F_GEOMETRY (1 << 4) /* Legacy geometry available */
#define VTBLK_F_RO (1 << 5) /* Disk is read-only */
#define VTBLK_F_BLK_SIZE (1 << 6) /* Block size of disk is available*/
#define VTBLK_F_SCSI (1 << 7) /* Supports scsi command passthru */
#define VTBLK_F_FLUSH (1 << 9) /* Writeback mode enabled after reset */
#define VTBLK_F_WCE (1 << 9) /* Legacy alias for FLUSH */
#define VTBLK_F_TOPOLOGY (1 << 10) /* Topology information is available */
#define VTBLK_F_CONFIG_WCE (1 << 11) /* Writeback mode available in config */
#define VTBLK_F_MQ (1 << 12) /* Multi-Queue */
#define VTBLK_F_DISCARD (1 << 13) /* Trim blocks */
#define VTBLK_F_WRITE_ZEROES (1 << 14) /* Write zeros */
/*
* Host capabilities
*/
#define VTBLK_S_HOSTCAPS \
( VTBLK_F_SEG_MAX | \
VTBLK_F_BLK_SIZE | \
VTBLK_F_FLUSH | \
VTBLK_F_TOPOLOGY | \
VIRTIO_RING_F_INDIRECT_DESC ) /* indirect descriptors */
/*
* The current blockif_delete() interface only allows a single delete
* request at a time.
*/
#define VTBLK_MAX_DISCARD_SEG 1
/*
* An arbitrary limit to prevent excessive latency due to large
* delete requests.
*/
#define VTBLK_MAX_DISCARD_SECT ((16 << 20) / VTBLK_BSIZE) /* 16 MiB */
/*
* Config space "registers"
*/
struct vtblk_config {
uint64_t vbc_capacity;
uint32_t vbc_size_max;
uint32_t vbc_seg_max;
struct {
uint16_t cylinders;
uint8_t heads;
uint8_t sectors;
} vbc_geometry;
uint32_t vbc_blk_size;
struct {
uint8_t physical_block_exp;
uint8_t alignment_offset;
uint16_t min_io_size;
uint32_t opt_io_size;
} vbc_topology;
uint8_t vbc_writeback;
uint8_t unused0[1];
uint16_t num_queues;
uint32_t max_discard_sectors;
uint32_t max_discard_seg;
uint32_t discard_sector_alignment;
uint32_t max_write_zeroes_sectors;
uint32_t max_write_zeroes_seg;
uint8_t write_zeroes_may_unmap;
uint8_t unused1[3];
} __packed;
/*
* Fixed-size block header
*/
struct virtio_blk_hdr {
#define VBH_OP_READ 0
#define VBH_OP_WRITE 1
#define VBH_OP_SCSI_CMD 2
#define VBH_OP_SCSI_CMD_OUT 3
#define VBH_OP_FLUSH 4
#define VBH_OP_FLUSH_OUT 5
#define VBH_OP_IDENT 8
#define VBH_OP_DISCARD 11
#define VBH_OP_WRITE_ZEROES 13
#define VBH_FLAG_BARRIER 0x80000000 /* OR'ed into vbh_type */
uint32_t vbh_type;
uint32_t vbh_ioprio;
uint64_t vbh_sector;
} __packed;
/*
* Debug printf
*/
static int pci_vtblk_debug;
#define DPRINTF(params) if (pci_vtblk_debug) PRINTLN params
#define WPRINTF(params) PRINTLN params
struct pci_vtblk_ioreq {
struct blockif_req io_req;
struct pci_vtblk_softc *io_sc;
uint8_t *io_status;
uint16_t io_idx;
};
struct virtio_blk_discard_write_zeroes {
uint64_t sector;
uint32_t num_sectors;
struct {
uint32_t unmap:1;
uint32_t reserved:31;
} flags;
};
/*
* Per-device softc
*/
struct pci_vtblk_softc {
struct virtio_softc vbsc_vs;
pthread_mutex_t vsc_mtx;
struct vqueue_info vbsc_vq;
struct vtblk_config vbsc_cfg;
struct virtio_consts vbsc_consts;
struct blockif_ctxt *bc;
char vbsc_ident[VTBLK_BLK_ID_BYTES];
struct pci_vtblk_ioreq vbsc_ios[VTBLK_RINGSZ];
};
static void pci_vtblk_reset(void *);
static void pci_vtblk_notify(void *, struct vqueue_info *);
static int pci_vtblk_cfgread(void *, int, int, uint32_t *);
static int pci_vtblk_cfgwrite(void *, int, int, uint32_t);
#ifdef BHYVE_SNAPSHOT
static void pci_vtblk_pause(void *);
static void pci_vtblk_resume(void *);
static int pci_vtblk_snapshot(void *, struct vm_snapshot_meta *);
#endif
static struct virtio_consts vtblk_vi_consts = {
.vc_name = "vtblk",
.vc_nvq = 1,
.vc_cfgsize = sizeof(struct vtblk_config),
.vc_reset = pci_vtblk_reset,
.vc_qnotify = pci_vtblk_notify,
.vc_cfgread = pci_vtblk_cfgread,
.vc_cfgwrite = pci_vtblk_cfgwrite,
.vc_apply_features = NULL,
.vc_hv_caps = VTBLK_S_HOSTCAPS,
#ifdef BHYVE_SNAPSHOT
.vc_pause = pci_vtblk_pause,
.vc_resume = pci_vtblk_resume,
.vc_snapshot = pci_vtblk_snapshot,
#endif
};
static void
pci_vtblk_reset(void *vsc)
{
struct pci_vtblk_softc *sc = vsc;
DPRINTF(("vtblk: device reset requested !"));
vi_reset_dev(&sc->vbsc_vs);
}
static void
pci_vtblk_done_locked(struct pci_vtblk_ioreq *io, int err)
{
struct pci_vtblk_softc *sc = io->io_sc;
/* convert errno into a virtio block error return */
if (err == EOPNOTSUPP || err == ENOSYS)
*io->io_status = VTBLK_S_UNSUPP;
else if (err != 0)
*io->io_status = VTBLK_S_IOERR;
else
*io->io_status = VTBLK_S_OK;
/*
* Return the descriptor back to the host.
* We wrote 1 byte (our status) to host.
*/
vq_relchain(&sc->vbsc_vq, io->io_idx, 1);
vq_endchains(&sc->vbsc_vq, 0);
}
#ifdef BHYVE_SNAPSHOT
static void
pci_vtblk_pause(void *vsc)
{
struct pci_vtblk_softc *sc = vsc;
DPRINTF(("vtblk: device pause requested !\n"));
blockif_pause(sc->bc);
}
static void
pci_vtblk_resume(void *vsc)
{
struct pci_vtblk_softc *sc = vsc;
DPRINTF(("vtblk: device resume requested !\n"));
blockif_resume(sc->bc);
}
static int
pci_vtblk_snapshot(void *vsc, struct vm_snapshot_meta *meta)
{
int ret;
struct pci_vtblk_softc *sc = vsc;
SNAPSHOT_VAR_OR_LEAVE(sc->vbsc_cfg, meta, ret, done);
SNAPSHOT_BUF_OR_LEAVE(sc->vbsc_ident, sizeof(sc->vbsc_ident),
meta, ret, done);
done:
return (ret);
}
#endif
static void
pci_vtblk_done(struct blockif_req *br, int err)
{
struct pci_vtblk_ioreq *io = br->br_param;
struct pci_vtblk_softc *sc = io->io_sc;
pthread_mutex_lock(&sc->vsc_mtx);
pci_vtblk_done_locked(io, err);
pthread_mutex_unlock(&sc->vsc_mtx);
}
static void
pci_vtblk_proc(struct pci_vtblk_softc *sc, struct vqueue_info *vq)
{
struct virtio_blk_hdr *vbh;
struct pci_vtblk_ioreq *io;
int i, n;
int err;
ssize_t iolen;
int writeop, type;
struct vi_req req;
struct iovec iov[BLOCKIF_IOV_MAX + 2];
struct virtio_blk_discard_write_zeroes *discard;
n = vq_getchain(vq, iov, BLOCKIF_IOV_MAX + 2, &req);
/*
* The first descriptor will be the read-only fixed header,
* and the last is for status (hence +2 above and below).
* The remaining iov's are the actual data I/O vectors.
*
* XXX - note - this fails on crash dump, which does a
* VIRTIO_BLK_T_FLUSH with a zero transfer length
*/
assert(n >= 2 && n <= BLOCKIF_IOV_MAX + 2);
io = &sc->vbsc_ios[req.idx];
assert(req.readable != 0);
assert(iov[0].iov_len == sizeof(struct virtio_blk_hdr));
vbh = (struct virtio_blk_hdr *)iov[0].iov_base;
memcpy(&io->io_req.br_iov, &iov[1], sizeof(struct iovec) * (n - 2));
io->io_req.br_iovcnt = n - 2;
io->io_req.br_offset = vbh->vbh_sector * VTBLK_BSIZE;
io->io_status = (uint8_t *)iov[--n].iov_base;
assert(req.writable != 0);
assert(iov[n].iov_len == 1);
/*
* XXX
* The guest should not be setting the BARRIER flag because
* we don't advertise the capability.
*/
type = vbh->vbh_type & ~VBH_FLAG_BARRIER;
writeop = (type == VBH_OP_WRITE || type == VBH_OP_DISCARD);
/*
* - Write op implies read-only descriptor
* - Read/ident op implies write-only descriptor
*
* By taking away either the read-only fixed header or the write-only
* status iovec, the following condition should hold true.
*/
assert(n == (writeop ? req.readable : req.writable));
iolen = 0;
for (i = 1; i < n; i++) {
iolen += iov[i].iov_len;
}
io->io_req.br_resid = iolen;
DPRINTF(("virtio-block: %s op, %zd bytes, %d segs, offset %ld",
writeop ? "write/discard" : "read/ident", iolen, i - 1,
io->io_req.br_offset));
switch (type) {
case VBH_OP_READ:
err = blockif_read(sc->bc, &io->io_req);
break;
case VBH_OP_WRITE:
err = blockif_write(sc->bc, &io->io_req);
break;
case VBH_OP_DISCARD:
/*
* We currently only support a single request, if the guest
* has submitted a request that doesn't conform to the
* requirements, we return a error.
*/
if (iov[1].iov_len != sizeof (*discard)) {
pci_vtblk_done_locked(io, EINVAL);
return;
}
/* The segments to discard are provided rather than data */
discard = (struct virtio_blk_discard_write_zeroes *)
iov[1].iov_base;
/*
* virtio v1.1 5.2.6.2:
* The device MUST set the status byte to VIRTIO_BLK_S_UNSUPP
* for discard and write zeroes commands if any unknown flag is
* set. Furthermore, the device MUST set the status byte to
* VIRTIO_BLK_S_UNSUPP for discard commands if the unmap flag
* is set.
*
* Currently there are no known flags for a DISCARD request.
*/
if (discard->flags.unmap != 0 || discard->flags.reserved != 0) {
pci_vtblk_done_locked(io, ENOTSUP);
return;
}
/* Make sure the request doesn't exceed our size limit */
if (discard->num_sectors > VTBLK_MAX_DISCARD_SECT) {
pci_vtblk_done_locked(io, EINVAL);
return;
}
io->io_req.br_offset = discard->sector * VTBLK_BSIZE;
io->io_req.br_resid = discard->num_sectors * VTBLK_BSIZE;
err = blockif_delete(sc->bc, &io->io_req);
break;
case VBH_OP_FLUSH:
case VBH_OP_FLUSH_OUT:
err = blockif_flush(sc->bc, &io->io_req);
break;
case VBH_OP_IDENT:
/* Assume a single buffer */
/* S/n equal to buffer is not zero-terminated. */
memset(iov[1].iov_base, 0, iov[1].iov_len);
strncpy(iov[1].iov_base, sc->vbsc_ident,
MIN(iov[1].iov_len, sizeof(sc->vbsc_ident)));
pci_vtblk_done_locked(io, 0);
return;
default:
pci_vtblk_done_locked(io, EOPNOTSUPP);
return;
}
assert(err == 0);
}
static void
pci_vtblk_notify(void *vsc, struct vqueue_info *vq)
{
struct pci_vtblk_softc *sc = vsc;
while (vq_has_descs(vq))
pci_vtblk_proc(sc, vq);
}
static void
pci_vtblk_resized(struct blockif_ctxt *bctxt __unused, void *arg,
size_t new_size)
{
struct pci_vtblk_softc *sc;
sc = arg;
sc->vbsc_cfg.vbc_capacity = new_size / VTBLK_BSIZE; /* 512-byte units */
vi_interrupt(&sc->vbsc_vs, VIRTIO_PCI_ISR_CONFIG,
sc->vbsc_vs.vs_msix_cfg_idx);
}
static int
pci_vtblk_init(struct pci_devinst *pi, nvlist_t *nvl)
{
char bident[sizeof("XXX:XXX")];
struct blockif_ctxt *bctxt;
const char *path, *serial;
MD5_CTX mdctx;
u_char digest[16];
struct pci_vtblk_softc *sc;
off_t size;
int i, sectsz, sts, sto;
/*
* The supplied backing file has to exist
*/
snprintf(bident, sizeof(bident), "%u:%u", pi->pi_slot, pi->pi_func);
bctxt = blockif_open(nvl, bident);
if (bctxt == NULL) {
perror("Could not open backing file");
return (1);
}
if (blockif_add_boot_device(pi, bctxt)) {
perror("Invalid boot device");
return (1);
}
size = blockif_size(bctxt);
sectsz = blockif_sectsz(bctxt);
blockif_psectsz(bctxt, &sts, &sto);
sc = calloc(1, sizeof(struct pci_vtblk_softc));
sc->bc = bctxt;
for (i = 0; i < VTBLK_RINGSZ; i++) {
struct pci_vtblk_ioreq *io = &sc->vbsc_ios[i];
io->io_req.br_callback = pci_vtblk_done;
io->io_req.br_param = io;
io->io_sc = sc;
io->io_idx = i;
}
bcopy(&vtblk_vi_consts, &sc->vbsc_consts, sizeof (vtblk_vi_consts));
if (blockif_candelete(sc->bc))
sc->vbsc_consts.vc_hv_caps |= VTBLK_F_DISCARD;
pthread_mutex_init(&sc->vsc_mtx, NULL);
/* init virtio softc and virtqueues */
vi_softc_linkup(&sc->vbsc_vs, &sc->vbsc_consts, sc, pi, &sc->vbsc_vq);
sc->vbsc_vs.vs_mtx = &sc->vsc_mtx;
sc->vbsc_vq.vq_qsize = VTBLK_RINGSZ;
/* sc->vbsc_vq.vq_notify = we have no per-queue notify */
/*
* If an explicit identifier is not given, create an
* identifier using parts of the md5 sum of the filename.
*/
bzero(sc->vbsc_ident, VTBLK_BLK_ID_BYTES);
if ((serial = get_config_value_node(nvl, "serial")) != NULL ||
(serial = get_config_value_node(nvl, "ser")) != NULL) {
strlcpy(sc->vbsc_ident, serial, VTBLK_BLK_ID_BYTES);
} else {
path = get_config_value_node(nvl, "path");
MD5Init(&mdctx);
MD5Update(&mdctx, path, strlen(path));
MD5Final(digest, &mdctx);
snprintf(sc->vbsc_ident, VTBLK_BLK_ID_BYTES,
"BHYVE-%02X%02X-%02X%02X-%02X%02X",
digest[0], digest[1], digest[2], digest[3], digest[4],
digest[5]);
}
/* setup virtio block config space */
sc->vbsc_cfg.vbc_capacity = size / VTBLK_BSIZE; /* 512-byte units */
sc->vbsc_cfg.vbc_size_max = 0; /* not negotiated */
/*
* If Linux is presented with a seg_max greater than the virtio queue
* size, it can stumble into situations where it violates its own
* invariants and panics. For safety, we keep seg_max clamped, paying
* heed to the two extra descriptors needed for the header and status
* of a request.
*/
sc->vbsc_cfg.vbc_seg_max = MIN(VTBLK_RINGSZ - 2, BLOCKIF_IOV_MAX);
sc->vbsc_cfg.vbc_geometry.cylinders = 0; /* no geometry */
sc->vbsc_cfg.vbc_geometry.heads = 0;
sc->vbsc_cfg.vbc_geometry.sectors = 0;
sc->vbsc_cfg.vbc_blk_size = sectsz;
sc->vbsc_cfg.vbc_topology.physical_block_exp =
(sts > sectsz) ? (ffsll(sts / sectsz) - 1) : 0;
sc->vbsc_cfg.vbc_topology.alignment_offset =
(sto != 0) ? ((sts - sto) / sectsz) : 0;
sc->vbsc_cfg.vbc_topology.min_io_size = 0;
sc->vbsc_cfg.vbc_topology.opt_io_size = 0;
sc->vbsc_cfg.vbc_writeback = 0;
sc->vbsc_cfg.max_discard_sectors = VTBLK_MAX_DISCARD_SECT;
sc->vbsc_cfg.max_discard_seg = VTBLK_MAX_DISCARD_SEG;
sc->vbsc_cfg.discard_sector_alignment = MAX(sectsz, sts) / VTBLK_BSIZE;
/*
* Should we move some of this into virtio.c? Could
* have the device, class, and subdev_0 as fields in
* the virtio constants structure.
*/
pci_set_cfgdata16(pi, PCIR_DEVICE, VIRTIO_DEV_BLOCK);
pci_set_cfgdata16(pi, PCIR_VENDOR, VIRTIO_VENDOR);
pci_set_cfgdata8(pi, PCIR_CLASS, PCIC_STORAGE);
pci_set_cfgdata16(pi, PCIR_SUBDEV_0, VIRTIO_ID_BLOCK);
pci_set_cfgdata16(pi, PCIR_SUBVEND_0, VIRTIO_VENDOR);
if (vi_intr_init(&sc->vbsc_vs, 1, fbsdrun_virtio_msix())) {
blockif_close(sc->bc);
free(sc);
return (1);
}
vi_set_io_bar(&sc->vbsc_vs, 0);
blockif_register_resize_callback(sc->bc, pci_vtblk_resized, sc);
return (0);
}
static int
pci_vtblk_cfgwrite(void *vsc __unused, int offset, int size __unused,
uint32_t value __unused)
{
DPRINTF(("vtblk: write to readonly reg %d", offset));
return (1);
}
static int
pci_vtblk_cfgread(void *vsc, int offset, int size, uint32_t *retval)
{
struct pci_vtblk_softc *sc = vsc;
void *ptr;
/* our caller has already verified offset and size */
ptr = (uint8_t *)&sc->vbsc_cfg + offset;
memcpy(retval, ptr, size);
return (0);
}
static const struct pci_devemu pci_de_vblk = {
.pe_emu = "virtio-blk",
.pe_init = pci_vtblk_init,
.pe_legacy_config = blockif_legacy_config,
.pe_barwrite = vi_pci_write,
.pe_barread = vi_pci_read,
#ifdef BHYVE_SNAPSHOT
.pe_snapshot = vi_pci_snapshot,
.pe_pause = vi_pci_pause,
.pe_resume = vi_pci_resume,
#endif
};
PCI_EMUL_SET(pci_de_vblk);