Adrian Chadd bbe493ec23 Modify the if_arge code to use a /fixed/ media mode when it's configured. ... Otherwise, the initial media speed would change if a PHY is hooked up, sending PHY speed notifications. For the AP135 at least, the RGMII PHY has a static speed/duplex configured and if the PHY plumbing attaches the PHY to the if_arge interface, the first link speed change from 1000/full will set the MAC to something that isn't useful. This shouldn't affect any other platforms - everything I looked at is using hard-coded speed/duplex as static, as they're facing a switch with no PHY attached.		2015-03-08 22:03:54 +00:00
..
apb.c	ACK interrupts on the new SoCs.	2015-01-05 02:00:41 +00:00
apbvar.h	The AR71xx has APB interrupts in the MISC registers from 0-7, later	2014-03-16 08:39:46 +00:00
ar71xx_bus_space_reversed.c
ar71xx_bus_space_reversed.h
ar71xx_chip.c	Add new features - an MDIO clock, WMAC reset, GMAC reset and ethernet	2013-10-15 01:35:48 +00:00
ar71xx_chip.h	MII related infrastructure changes.	2012-05-02 01:21:57 +00:00
ar71xx_cpudef.h	Add a GPIO output mux configuration method.	2015-01-03 06:55:58 +00:00
ar71xx_ehci.c	[QCA955x] make the USB EHCI interrupts shareable.	2015-03-02 02:08:43 +00:00
ar71xx_fixup.c	Introduce the matching PCI ath(4) fixup code from ar71xx_pci into	2012-04-20 08:26:05 +00:00
ar71xx_fixup.h	Introduce the matching PCI ath(4) fixup code from ar71xx_pci into	2012-04-20 08:26:05 +00:00
ar71xx_gpio.c	Add very initial QCA955x awareness to the GPIO code.	2015-03-01 07:00:34 +00:00
ar71xx_gpiovar.h	Implement GPIO_GET_BUS() method for all GPIO drivers.	2015-01-31 19:32:14 +00:00
ar71xx_machdep.c	Follow up to r225617. In order to maximize the re-usability of kernel code	2014-10-16 18:04:43 +00:00
ar71xx_ohci.c	Add 64-bit DMA support in the XHCI controller driver.	2015-01-05 20:22:18 +00:00
ar71xx_pci_bus_space.c
ar71xx_pci_bus_space.h
ar71xx_pci.c	Devices that rely on hints or identify routines for discovery need to	2013-10-29 14:07:31 +00:00
ar71xx_setup.c	Add initial Qualcomm Atheros QCA955x SoC support.	2015-01-05 02:06:26 +00:00
ar71xx_setup.h	add QCA955x SoC types.	2015-01-05 01:59:44 +00:00
ar71xx_spi.c	Devices that rely on hints or identify routines for discovery need to	2013-10-29 14:07:31 +00:00
ar71xx_wdog.c	Devices that rely on hints or identify routines for discovery need to	2013-10-29 14:07:31 +00:00
ar71xxreg.h	Add a MII mode for SGMII.	2015-03-02 01:23:59 +00:00
ar91xx_chip.c	Add new features - an MDIO clock, WMAC reset, GMAC reset and ethernet	2013-10-15 01:35:48 +00:00
ar91xx_chip.h
ar91xxreg.h
ar724x_chip.c	Add new features - an MDIO clock, WMAC reset, GMAC reset and ethernet	2013-10-15 01:35:48 +00:00
ar724x_chip.h
ar724x_pci.c	Fix the AR724x PCIe glue to correctly probe the BAR on AR7240 devices.	2014-09-28 07:27:58 +00:00
ar724xreg.h	Use the correct bitshift operators for the GPIO definitions.	2014-01-22 08:02:07 +00:00
ar933x_chip.c	Update the AR933x SoC support to include a few new knobs:	2013-10-15 03:23:08 +00:00
ar933x_chip.h	Commit initial (unfinished!) support for the AR933x series of embedded	2013-03-27 03:38:58 +00:00
ar933x_uart.h	* Fix clock register definitions	2013-03-29 06:32:02 +00:00
ar933xreg.h	Add register definitions for the AR933x SoC GMAC (ie, ethernet MAC)	2013-10-14 23:57:12 +00:00
ar934x_chip.c	Add a GPIO output mux configuration method.	2015-01-03 06:55:58 +00:00
ar934x_chip.h	Implement some initial AR934x support routines.	2013-07-21 03:56:57 +00:00
ar934x_nfcreg.h	Add the AR934x NAND flash controller register definitions.	2014-03-18 12:18:35 +00:00
ar934xreg.h	Add AR934x specific GPIO functions and output MUX configuration.	2015-01-03 06:35:53 +00:00
files.ar71xx	Make the apb.c code optional behind ar71xx_apb rather than standard.	2015-01-06 07:43:07 +00:00
if_arge.c	Modify the if_arge code to use a /fixed/ media mode when it's configured.	2015-03-08 22:03:54 +00:00
if_argevar.h	The linux driver code for the MDIO bus does a read-after-write	2015-02-02 17:33:00 +00:00
pcf2123_rtc.c
pcf2123reg.h
qca955x_chip.c	Add ethernet MAC DDR flush hookups for QCA955x.	2015-03-04 03:52:50 +00:00
qca955x_chip.h	Add initial Qualcomm Atheros QCA955x SoC support.	2015-01-05 02:06:26 +00:00
qca955xreg.h	Add DDR flush registers for QCA955x.	2015-03-04 03:51:54 +00:00
std.ar71xx
uart_bus_ar71xx.c	Use the UART frequency when programming the UART clock.	2013-07-21 03:54:39 +00:00
uart_bus_ar933x.c	Use the UART frequency when programming the UART clock.	2013-07-21 03:54:39 +00:00
uart_cpu_ar71xx.c	Use the UART frequency when programming the UART clock.	2013-07-21 03:54:39 +00:00
uart_cpu_ar933x.c	Use the UART frequency when programming the UART clock.	2013-07-21 03:54:39 +00:00
uart_dev_ar933x.c	Commit some sins in the name of "oh god oh god I don't really want to	2014-07-27 05:44:42 +00:00
uart_dev_ar933x.h	Bring over the initial, CPU-only UART support for the AR933x SoC.	2013-03-28 19:27:06 +00:00