d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
d636ad2ee8
freebsd-dev/sys/cam/scsi/scsi_sa.c
Konstantin Belousov ee1988938c Convert sys/cam to use make_dev_s(). 
Reviewed by:	hps, jhb
Sponsored by:	The FreeBSD Foundation
MFC after:	3 weeks
Differential revision:	https://reviews.freebsd.org/D4746
2016-01-07 20:22:55 +00:00

5886 lines
159 KiB
C
Raw Blame History

/*-
* Implementation of SCSI Sequential Access Peripheral driver for CAM.
*
* Copyright (c) 1999, 2000 Matthew Jacob
* Copyright (c) 2013, 2014, 2015 Spectra Logic Corporation
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/queue.h>
#ifdef _KERNEL
#include <sys/systm.h>
#include <sys/kernel.h>
#endif
#include <sys/types.h>
#include <sys/time.h>
#include <sys/bio.h>
#include <sys/limits.h>
#include <sys/malloc.h>
#include <sys/mtio.h>
#ifdef _KERNEL
#include <sys/conf.h>
#include <sys/sbuf.h>
#include <sys/sysctl.h>
#include <sys/taskqueue.h>
#endif
#include <sys/fcntl.h>
#include <sys/devicestat.h>
#ifndef _KERNEL
#include <stdio.h>
#include <string.h>
#endif
#include <cam/cam.h>
#include <cam/cam_ccb.h>
#include <cam/cam_periph.h>
#include <cam/cam_xpt_periph.h>
#include <cam/cam_debug.h>
#include <cam/scsi/scsi_all.h>
#include <cam/scsi/scsi_message.h>
#include <cam/scsi/scsi_sa.h>
#ifdef _KERNEL
#include <opt_sa.h>
#ifndef SA_IO_TIMEOUT
#define SA_IO_TIMEOUT 32
#endif
#ifndef SA_SPACE_TIMEOUT
#define SA_SPACE_TIMEOUT 1 * 60
#endif
#ifndef SA_REWIND_TIMEOUT
#define SA_REWIND_TIMEOUT 2 * 60
#endif
#ifndef SA_ERASE_TIMEOUT
#define SA_ERASE_TIMEOUT 4 * 60
#endif
#ifndef SA_REP_DENSITY_TIMEOUT
#define SA_REP_DENSITY_TIMEOUT 90
#endif
#define SCSIOP_TIMEOUT (60 * 1000) /* not an option */
#define IO_TIMEOUT (SA_IO_TIMEOUT * 60 * 1000)
#define REWIND_TIMEOUT (SA_REWIND_TIMEOUT * 60 * 1000)
#define ERASE_TIMEOUT (SA_ERASE_TIMEOUT * 60 * 1000)
#define SPACE_TIMEOUT (SA_SPACE_TIMEOUT * 60 * 1000)
#define REP_DENSITY_TIMEOUT (SA_REP_DENSITY_TIMEOUT * 60 * 1000)
/*
* Additional options that can be set for config: SA_1FM_AT_EOT
*/
#ifndef UNUSED_PARAMETER
#define UNUSED_PARAMETER(x) x = x
#endif
#define QFRLS(ccb) \
if (((ccb)->ccb_h.status & CAM_DEV_QFRZN) != 0) \
cam_release_devq((ccb)->ccb_h.path, 0, 0, 0, FALSE)
/*
* Driver states
*/
static MALLOC_DEFINE(M_SCSISA, "SCSI sa", "SCSI sequential access buffers");
typedef enum {
SA_STATE_NORMAL, SA_STATE_ABNORMAL
} sa_state;
#define ccb_pflags ppriv_field0
#define ccb_bp ppriv_ptr1
/* bits in ccb_pflags */
#define SA_POSITION_UPDATED 0x1
typedef enum {
SA_FLAG_OPEN = 0x0001,
SA_FLAG_FIXED = 0x0002,
SA_FLAG_TAPE_LOCKED = 0x0004,
SA_FLAG_TAPE_MOUNTED = 0x0008,
SA_FLAG_TAPE_WP = 0x0010,
SA_FLAG_TAPE_WRITTEN = 0x0020,
SA_FLAG_EOM_PENDING = 0x0040,
SA_FLAG_EIO_PENDING = 0x0080,
SA_FLAG_EOF_PENDING = 0x0100,
SA_FLAG_ERR_PENDING = (SA_FLAG_EOM_PENDING|SA_FLAG_EIO_PENDING|
SA_FLAG_EOF_PENDING),
SA_FLAG_INVALID = 0x0200,
SA_FLAG_COMP_ENABLED = 0x0400,
SA_FLAG_COMP_SUPP = 0x0800,
SA_FLAG_COMP_UNSUPP = 0x1000,
SA_FLAG_TAPE_FROZEN = 0x2000,
SA_FLAG_PROTECT_SUPP = 0x4000,
SA_FLAG_COMPRESSION = (SA_FLAG_COMP_SUPP|SA_FLAG_COMP_ENABLED|
SA_FLAG_COMP_UNSUPP),
SA_FLAG_SCTX_INIT = 0x8000
} sa_flags;
typedef enum {
SA_MODE_REWIND = 0x00,
SA_MODE_NOREWIND = 0x01,
SA_MODE_OFFLINE = 0x02
} sa_mode;
typedef enum {
SA_PARAM_NONE = 0x000,
SA_PARAM_BLOCKSIZE = 0x001,
SA_PARAM_DENSITY = 0x002,
SA_PARAM_COMPRESSION = 0x004,
SA_PARAM_BUFF_MODE = 0x008,
SA_PARAM_NUMBLOCKS = 0x010,
SA_PARAM_WP = 0x020,
SA_PARAM_SPEED = 0x040,
SA_PARAM_DENSITY_EXT = 0x080,
SA_PARAM_LBP = 0x100,
SA_PARAM_ALL = 0x1ff
} sa_params;
typedef enum {
SA_QUIRK_NONE = 0x000,
SA_QUIRK_NOCOMP = 0x001, /* Can't deal with compression at all*/
SA_QUIRK_FIXED = 0x002, /* Force fixed mode */
SA_QUIRK_VARIABLE = 0x004, /* Force variable mode */
SA_QUIRK_2FM = 0x008, /* Needs Two File Marks at EOD */
SA_QUIRK_1FM = 0x010, /* No more than 1 File Mark at EOD */
SA_QUIRK_NODREAD = 0x020, /* Don't try and dummy read density */
SA_QUIRK_NO_MODESEL = 0x040, /* Don't do mode select at all */
SA_QUIRK_NO_CPAGE = 0x080, /* Don't use DEVICE COMPRESSION page */
SA_QUIRK_NO_LONG_POS = 0x100 /* No long position information */
} sa_quirks;
#define SA_QUIRK_BIT_STRING \
"\020" \
"\001NOCOMP" \
"\002FIXED" \
"\003VARIABLE" \
"\0042FM" \
"\0051FM" \
"\006NODREAD" \
"\007NO_MODESEL" \
"\010NO_CPAGE" \
"\011NO_LONG_POS"
#define SAMODE(z) (dev2unit(z) & 0x3)
#define SA_IS_CTRL(z) (dev2unit(z) & (1 << 4))
#define SA_NOT_CTLDEV 0
#define SA_CTLDEV 1
#define SA_ATYPE_R 0
#define SA_ATYPE_NR 1
#define SA_ATYPE_ER 2
#define SA_NUM_ATYPES 3
#define SAMINOR(ctl, access) \
((ctl << 4) | (access & 0x3))
struct sa_devs {
struct cdev *ctl_dev;
struct cdev *r_dev;
struct cdev *nr_dev;
struct cdev *er_dev;
};
#define SASBADDBASE(sb, indent, data, xfmt, name, type, xsize, desc) \
sbuf_printf(sb, "%*s<%s type=\"%s\" size=\"%zd\" " \
"fmt=\"%s\" desc=\"%s\">" #xfmt "</%s>\n", indent, "", \
#name, #type, xsize, #xfmt, desc ? desc : "", data, #name);
#define SASBADDINT(sb, indent, data, fmt, name) \
SASBADDBASE(sb, indent, data, fmt, name, int, sizeof(data), \
NULL)
#define SASBADDINTDESC(sb, indent, data, fmt, name, desc) \
SASBADDBASE(sb, indent, data, fmt, name, int, sizeof(data), \
desc)
#define SASBADDUINT(sb, indent, data, fmt, name) \
SASBADDBASE(sb, indent, data, fmt, name, uint, sizeof(data), \
NULL)
#define SASBADDUINTDESC(sb, indent, data, fmt, name, desc) \
SASBADDBASE(sb, indent, data, fmt, name, uint, sizeof(data), \
desc)
#define SASBADDFIXEDSTR(sb, indent, data, fmt, name) \
SASBADDBASE(sb, indent, data, fmt, name, str, sizeof(data), \
NULL)
#define SASBADDFIXEDSTRDESC(sb, indent, data, fmt, name, desc) \
SASBADDBASE(sb, indent, data, fmt, name, str, sizeof(data), \
desc)
#define SASBADDVARSTR(sb, indent, data, fmt, name, maxlen) \
SASBADDBASE(sb, indent, data, fmt, name, str, maxlen, NULL)
#define SASBADDVARSTRDESC(sb, indent, data, fmt, name, maxlen, desc) \
SASBADDBASE(sb, indent, data, fmt, name, str, maxlen, desc)
#define SASBADDNODE(sb, indent, name) { \
sbuf_printf(sb, "%*s<%s type=\"%s\">\n", indent, "", #name, \
"node"); \
indent += 2; \
}
#define SASBADDNODENUM(sb, indent, name, num) { \
sbuf_printf(sb, "%*s<%s type=\"%s\" num=\"%d\">\n", indent, "", \
#name, "node", num); \
indent += 2; \
}
#define SASBENDNODE(sb, indent, name) { \
indent -= 2; \
sbuf_printf(sb, "%*s</%s>\n", indent, "", #name); \
}
#define SA_DENSITY_TYPES 4
struct sa_prot_state {
int initialized;
uint32_t prot_method;
uint32_t pi_length;
uint32_t lbp_w;
uint32_t lbp_r;
uint32_t rbdp;
};
struct sa_prot_info {
struct sa_prot_state cur_prot_state;
struct sa_prot_state pending_prot_state;
};
/*
* A table mapping protection parameters to their types and values.
*/
struct sa_prot_map {
char *name;
mt_param_set_type param_type;
off_t offset;
uint32_t min_val;
uint32_t max_val;
uint32_t *value;
} sa_prot_table[] = {
{ "prot_method", MT_PARAM_SET_UNSIGNED,
__offsetof(struct sa_prot_state, prot_method),
/*min_val*/ 0, /*max_val*/ 255, NULL },
{ "pi_length", MT_PARAM_SET_UNSIGNED,
__offsetof(struct sa_prot_state, pi_length),
/*min_val*/ 0, /*max_val*/ SA_CTRL_DP_PI_LENGTH_MASK, NULL },
{ "lbp_w", MT_PARAM_SET_UNSIGNED,
__offsetof(struct sa_prot_state, lbp_w),
/*min_val*/ 0, /*max_val*/ 1, NULL },
{ "lbp_r", MT_PARAM_SET_UNSIGNED,
__offsetof(struct sa_prot_state, lbp_r),
/*min_val*/ 0, /*max_val*/ 1, NULL },
{ "rbdp", MT_PARAM_SET_UNSIGNED,
__offsetof(struct sa_prot_state, rbdp),
/*min_val*/ 0, /*max_val*/ 1, NULL }
};
#define SA_NUM_PROT_ENTS sizeof(sa_prot_table)/sizeof(sa_prot_table[0])
#define SA_PROT_ENABLED(softc) ((softc->flags & SA_FLAG_PROTECT_SUPP) \
&& (softc->prot_info.cur_prot_state.initialized != 0) \
&& (softc->prot_info.cur_prot_state.prot_method != 0))
#define SA_PROT_LEN(softc) softc->prot_info.cur_prot_state.pi_length
struct sa_softc {
sa_state state;
sa_flags flags;
sa_quirks quirks;
u_int si_flags;
struct cam_periph *periph;
struct bio_queue_head bio_queue;
int queue_count;
struct devstat *device_stats;
struct sa_devs devs;
int open_count;
int num_devs_to_destroy;
int blk_gran;
int blk_mask;
int blk_shift;
u_int32_t max_blk;
u_int32_t min_blk;
u_int32_t maxio;
u_int32_t cpi_maxio;
int allow_io_split;
u_int32_t comp_algorithm;
u_int32_t saved_comp_algorithm;
u_int32_t media_blksize;
u_int32_t last_media_blksize;
u_int32_t media_numblks;
u_int8_t media_density;
u_int8_t speed;
u_int8_t scsi_rev;
u_int8_t dsreg; /* mtio mt_dsreg, redux */
int buffer_mode;
int filemarks;
union ccb saved_ccb;
int last_resid_was_io;
uint8_t density_type_bits[SA_DENSITY_TYPES];
int density_info_valid[SA_DENSITY_TYPES];
uint8_t density_info[SA_DENSITY_TYPES][SRDS_MAX_LENGTH];
struct sa_prot_info prot_info;
int sili;
int eot_warn;
/*
* Current position information. -1 means that the given value is
* unknown. fileno and blkno are always calculated. blkno is
* relative to the previous file mark. rep_fileno and rep_blkno
* are as reported by the drive, if it supports the long form
* report for the READ POSITION command. rep_blkno is relative to
* the beginning of the partition.
*
* bop means that the drive is at the beginning of the partition.
* eop means that the drive is between early warning and end of
* partition, inside the current partition.
* bpew means that the position is in a PEWZ (Programmable Early
* Warning Zone)
*/
daddr_t partition; /* Absolute from BOT */
daddr_t fileno; /* Relative to beginning of partition */
daddr_t blkno; /* Relative to last file mark */
daddr_t rep_blkno; /* Relative to beginning of partition */
daddr_t rep_fileno; /* Relative to beginning of partition */
int bop; /* Beginning of Partition */
int eop; /* End of Partition */
int bpew; /* Beyond Programmable Early Warning */
/*
* Latched Error Info
*/
struct {
struct scsi_sense_data _last_io_sense;
u_int64_t _last_io_resid;
u_int8_t _last_io_cdb[CAM_MAX_CDBLEN];
struct scsi_sense_data _last_ctl_sense;
u_int64_t _last_ctl_resid;
u_int8_t _last_ctl_cdb[CAM_MAX_CDBLEN];
#define last_io_sense errinfo._last_io_sense
#define last_io_resid errinfo._last_io_resid
#define last_io_cdb errinfo._last_io_cdb
#define last_ctl_sense errinfo._last_ctl_sense
#define last_ctl_resid errinfo._last_ctl_resid
#define last_ctl_cdb errinfo._last_ctl_cdb
} errinfo;
/*
* Misc other flags/state
*/
u_int32_t
: 29,
open_rdonly : 1, /* open read-only */
open_pending_mount : 1, /* open pending mount */
ctrl_mode : 1; /* control device open */
struct task sysctl_task;
struct sysctl_ctx_list sysctl_ctx;
struct sysctl_oid *sysctl_tree;
};
struct sa_quirk_entry {
struct scsi_inquiry_pattern inq_pat; /* matching pattern */
sa_quirks quirks; /* specific quirk type */
u_int32_t prefblk; /* preferred blocksize when in fixed mode */
};
static struct sa_quirk_entry sa_quirk_table[] =
{
{
{ T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "OnStream",
"ADR*", "*"}, SA_QUIRK_FIXED|SA_QUIRK_NODREAD |
SA_QUIRK_1FM|SA_QUIRK_NO_MODESEL, 32768
},
{
{ T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "ARCHIVE",
"Python 06408*", "*"}, SA_QUIRK_NODREAD, 0
},
{
{ T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "ARCHIVE",
"Python 25601*", "*"}, SA_QUIRK_NOCOMP|SA_QUIRK_NODREAD, 0
},
{
{ T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "ARCHIVE",
"Python*", "*"}, SA_QUIRK_NODREAD, 0
},
{
{ T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "ARCHIVE",
"VIPER 150*", "*"}, SA_QUIRK_FIXED|SA_QUIRK_1FM, 512
},
{
{ T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "ARCHIVE",
"VIPER 2525 25462", "-011"},
SA_QUIRK_NOCOMP|SA_QUIRK_1FM|SA_QUIRK_NODREAD, 0
},
{
{ T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "ARCHIVE",
"VIPER 2525*", "*"}, SA_QUIRK_FIXED|SA_QUIRK_1FM, 1024
},
#if 0
{
{ T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "HP",
"C15*", "*"}, SA_QUIRK_VARIABLE|SA_QUIRK_NO_CPAGE, 0,
},
#endif
{
{ T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "HP",
"C56*", "*"}, SA_QUIRK_VARIABLE|SA_QUIRK_2FM, 0
},
{
{ T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "HP",
"T20*", "*"}, SA_QUIRK_FIXED|SA_QUIRK_1FM, 512
},
{
{ T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "HP",
"T4000*", "*"}, SA_QUIRK_FIXED|SA_QUIRK_1FM, 512
},
{
{ T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "HP",
"HP-88780*", "*"}, SA_QUIRK_VARIABLE|SA_QUIRK_2FM, 0
},
{
{ T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "KENNEDY",
"*", "*"}, SA_QUIRK_VARIABLE|SA_QUIRK_2FM, 0
},
{
{ T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "M4 DATA",
"123107 SCSI*", "*"}, SA_QUIRK_VARIABLE|SA_QUIRK_2FM, 0
},
{ /* jreynold@primenet.com */
{ T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "Seagate",
"STT8000N*", "*"}, SA_QUIRK_1FM, 0
},
{ /* mike@sentex.net */
{ T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "Seagate",
"STT20000*", "*"}, SA_QUIRK_1FM, 0
},
{
{ T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "SEAGATE",
"DAT 06241-XXX", "*"}, SA_QUIRK_VARIABLE|SA_QUIRK_2FM, 0
},
{
{ T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "TANDBERG",
" TDC 3600", "U07:"}, SA_QUIRK_NOCOMP|SA_QUIRK_1FM, 512
},
{
{ T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "TANDBERG",
" TDC 3800", "*"}, SA_QUIRK_NOCOMP|SA_QUIRK_1FM, 512
},
{
{ T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "TANDBERG",
" TDC 4100", "*"}, SA_QUIRK_NOCOMP|SA_QUIRK_1FM, 512
},
{
{ T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "TANDBERG",
" TDC 4200", "*"}, SA_QUIRK_NOCOMP|SA_QUIRK_1FM, 512
},
{
{ T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "TANDBERG",
" SLR*", "*"}, SA_QUIRK_1FM, 0
},
{
{ T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "WANGTEK",
"5525ES*", "*"}, SA_QUIRK_FIXED|SA_QUIRK_1FM, 512
},
{
{ T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "WANGTEK",
"51000*", "*"}, SA_QUIRK_FIXED|SA_QUIRK_1FM, 1024
}
};
static d_open_t saopen;
static d_close_t saclose;
static d_strategy_t sastrategy;
static d_ioctl_t saioctl;
static periph_init_t sainit;
static periph_ctor_t saregister;
static periph_oninv_t saoninvalidate;
static periph_dtor_t sacleanup;
static periph_start_t sastart;
static void saasync(void *callback_arg, u_int32_t code,
struct cam_path *path, void *arg);
static void sadone(struct cam_periph *periph,
union ccb *start_ccb);
static int saerror(union ccb *ccb, u_int32_t cam_flags,
u_int32_t sense_flags);
static int samarkswanted(struct cam_periph *);
static int sacheckeod(struct cam_periph *periph);
static int sagetparams(struct cam_periph *periph,
sa_params params_to_get,
u_int32_t *blocksize, u_int8_t *density,
u_int32_t *numblocks, int *buff_mode,
u_int8_t *write_protect, u_int8_t *speed,
int *comp_supported, int *comp_enabled,
u_int32_t *comp_algorithm,
sa_comp_t *comp_page,
struct scsi_control_data_prot_subpage
*prot_page, int dp_size,
int prot_changeable);
static int sasetprot(struct cam_periph *periph,
struct sa_prot_state *new_prot);
static int sasetparams(struct cam_periph *periph,
sa_params params_to_set,
u_int32_t blocksize, u_int8_t density,
u_int32_t comp_algorithm,
u_int32_t sense_flags);
static int sasetsili(struct cam_periph *periph,
struct mtparamset *ps, int num_params);
static int saseteotwarn(struct cam_periph *periph,
struct mtparamset *ps, int num_params);
static void safillprot(struct sa_softc *softc, int *indent,
struct sbuf *sb);
static void sapopulateprots(struct sa_prot_state *cur_state,
struct sa_prot_map *new_table,
int table_ents);
static struct sa_prot_map *safindprotent(char *name, struct sa_prot_map *table,
int table_ents);
static int sasetprotents(struct cam_periph *periph,
struct mtparamset *ps, int num_params);
static struct sa_param_ent *safindparament(struct mtparamset *ps);
static int saparamsetlist(struct cam_periph *periph,
struct mtsetlist *list, int need_copy);
static int saextget(struct cdev *dev, struct cam_periph *periph,
struct sbuf *sb, struct mtextget *g);
static int saparamget(struct sa_softc *softc, struct sbuf *sb);
static void saprevent(struct cam_periph *periph, int action);
static int sarewind(struct cam_periph *periph);
static int saspace(struct cam_periph *periph, int count,
scsi_space_code code);
static void sadevgonecb(void *arg);
static void sasetupdev(struct sa_softc *softc, struct cdev *dev);
static int samount(struct cam_periph *, int, struct cdev *);
static int saretension(struct cam_periph *periph);
static int sareservereleaseunit(struct cam_periph *periph,
int reserve);
static int saloadunload(struct cam_periph *periph, int load);
static int saerase(struct cam_periph *periph, int longerase);
static int sawritefilemarks(struct cam_periph *periph,
int nmarks, int setmarks, int immed);
static int sagetpos(struct cam_periph *periph);
static int sardpos(struct cam_periph *periph, int, u_int32_t *);
static int sasetpos(struct cam_periph *periph, int,
struct mtlocate *);
static void safilldenstypesb(struct sbuf *sb, int *indent,
uint8_t *buf, int buf_len,
int is_density);
static void safilldensitysb(struct sa_softc *softc, int *indent,
struct sbuf *sb);
#ifndef SA_DEFAULT_IO_SPLIT
#define SA_DEFAULT_IO_SPLIT 0
#endif
static int sa_allow_io_split = SA_DEFAULT_IO_SPLIT;
/*
* Tunable to allow the user to set a global allow_io_split value. Note
* that this WILL GO AWAY in FreeBSD 11.0. Silently splitting the I/O up
* is bad behavior, because it hides the true tape block size from the
* application.
*/
static SYSCTL_NODE(_kern_cam, OID_AUTO, sa, CTLFLAG_RD, 0,
"CAM Sequential Access Tape Driver");
SYSCTL_INT(_kern_cam_sa, OID_AUTO, allow_io_split, CTLFLAG_RDTUN,
&sa_allow_io_split, 0, "Default I/O split value");
static struct periph_driver sadriver =
{
sainit, "sa",
TAILQ_HEAD_INITIALIZER(sadriver.units), /* generation */ 0
};
PERIPHDRIVER_DECLARE(sa, sadriver);
/* For 2.2-stable support */
#ifndef D_TAPE
#define D_TAPE 0
#endif
static struct cdevsw sa_cdevsw = {
.d_version = D_VERSION,
.d_open = saopen,
.d_close = saclose,
.d_read = physread,
.d_write = physwrite,
.d_ioctl = saioctl,
.d_strategy = sastrategy,
.d_name = "sa",
.d_flags = D_TAPE | D_TRACKCLOSE,
};
static int
saopen(struct cdev *dev, int flags, int fmt, struct thread *td)
{
struct cam_periph *periph;
struct sa_softc *softc;
int error;
periph = (struct cam_periph *)dev->si_drv1;
if (cam_periph_acquire(periph) != CAM_REQ_CMP) {
return (ENXIO);
}
cam_periph_lock(periph);
softc = (struct sa_softc *)periph->softc;
CAM_DEBUG(periph->path, CAM_DEBUG_TRACE|CAM_DEBUG_INFO,
("saopen(%s): softc=0x%x\n", devtoname(dev), softc->flags));
if (SA_IS_CTRL(dev)) {
softc->ctrl_mode = 1;
softc->open_count++;
cam_periph_unlock(periph);
return (0);
}
if ((error = cam_periph_hold(periph, PRIBIO|PCATCH)) != 0) {
cam_periph_unlock(periph);
cam_periph_release(periph);
return (error);
}
if (softc->flags & SA_FLAG_OPEN) {
error = EBUSY;
} else if (softc->flags & SA_FLAG_INVALID) {
error = ENXIO;
} else {
/*
* Preserve whether this is a read_only open.
*/
softc->open_rdonly = (flags & O_RDWR) == O_RDONLY;
/*
* The function samount ensures media is loaded and ready.
* It also does a device RESERVE if the tape isn't yet mounted.
*
* If the mount fails and this was a non-blocking open,
* make this a 'open_pending_mount' action.
*/
error = samount(periph, flags, dev);
if (error && (flags & O_NONBLOCK)) {
softc->flags |= SA_FLAG_OPEN;
softc->open_pending_mount = 1;
softc->open_count++;
cam_periph_unhold(periph);
cam_periph_unlock(periph);
return (0);
}
}
if (error) {
cam_periph_unhold(periph);
cam_periph_unlock(periph);
cam_periph_release(periph);
return (error);
}
saprevent(periph, PR_PREVENT);
softc->flags |= SA_FLAG_OPEN;
softc->open_count++;
cam_periph_unhold(periph);
cam_periph_unlock(periph);
return (error);
}
static int
saclose(struct cdev *dev, int flag, int fmt, struct thread *td)
{
struct cam_periph *periph;
struct sa_softc *softc;
int mode, error, writing, tmp, i;
int closedbits = SA_FLAG_OPEN;
mode = SAMODE(dev);
periph = (struct cam_periph *)dev->si_drv1;
cam_periph_lock(periph);
softc = (struct sa_softc *)periph->softc;
CAM_DEBUG(periph->path, CAM_DEBUG_TRACE|CAM_DEBUG_INFO,
("saclose(%s): softc=0x%x\n", devtoname(dev), softc->flags));
softc->open_rdonly = 0;
if (SA_IS_CTRL(dev)) {
softc->ctrl_mode = 0;
softc->open_count--;
cam_periph_unlock(periph);
cam_periph_release(periph);
return (0);
}
if (softc->open_pending_mount) {
softc->flags &= ~SA_FLAG_OPEN;
softc->open_pending_mount = 0;
softc->open_count--;
cam_periph_unlock(periph);
cam_periph_release(periph);
return (0);
}
if ((error = cam_periph_hold(periph, PRIBIO)) != 0) {
cam_periph_unlock(periph);
return (error);
}
/*
* Were we writing the tape?
*/
writing = (softc->flags & SA_FLAG_TAPE_WRITTEN) != 0;
/*
* See whether or not we need to write filemarks. If this
* fails, we probably have to assume we've lost tape
* position.
*/
error = sacheckeod(periph);
if (error) {
xpt_print(periph->path,
"failed to write terminating filemark(s)\n");
softc->flags |= SA_FLAG_TAPE_FROZEN;
}
/*
* Whatever we end up doing, allow users to eject tapes from here on.
*/
saprevent(periph, PR_ALLOW);
/*
* Decide how to end...
*/
if ((softc->flags & SA_FLAG_TAPE_MOUNTED) == 0) {
closedbits |= SA_FLAG_TAPE_FROZEN;
} else switch (mode) {
case SA_MODE_OFFLINE:
/*
* An 'offline' close is an unconditional release of
* frozen && mount conditions, irrespective of whether
* these operations succeeded. The reason for this is
* to allow at least some kind of programmatic way
* around our state getting all fouled up. If somebody
* issues an 'offline' command, that will be allowed
* to clear state.
*/
(void) sarewind(periph);
(void) saloadunload(periph, FALSE);
closedbits |= SA_FLAG_TAPE_MOUNTED|SA_FLAG_TAPE_FROZEN;
break;
case SA_MODE_REWIND:
/*
* If the rewind fails, return an error- if anyone cares,
* but not overwriting any previous error.
*
* We don't clear the notion of mounted here, but we do
* clear the notion of frozen if we successfully rewound.
*/
tmp = sarewind(periph);
if (tmp) {
if (error != 0)
error = tmp;
} else {
closedbits |= SA_FLAG_TAPE_FROZEN;
}
break;
case SA_MODE_NOREWIND:
/*
* If we're not rewinding/unloading the tape, find out
* whether we need to back up over one of two filemarks
* we wrote (if we wrote two filemarks) so that appends
* from this point on will be sane.
*/
if (error == 0 && writing && (softc->quirks & SA_QUIRK_2FM)) {
tmp = saspace(periph, -1, SS_FILEMARKS);
if (tmp) {
xpt_print(periph->path, "unable to backspace "
"over one of double filemarks at end of "
"tape\n");
xpt_print(periph->path, "it is possible that "
"this device needs a SA_QUIRK_1FM quirk set"
"for it\n");
softc->flags |= SA_FLAG_TAPE_FROZEN;
}
}
break;
default:
xpt_print(periph->path, "unknown mode 0x%x in saclose\n", mode);
/* NOTREACHED */
break;
}
/*
* We wish to note here that there are no more filemarks to be written.
*/
softc->filemarks = 0;
softc->flags &= ~SA_FLAG_TAPE_WRITTEN;
/*
* And we are no longer open for business.
*/
softc->flags &= ~closedbits;
softc->open_count--;
/*
* Invalidate any density information that depends on having tape
* media in the drive.
*/
for (i = 0; i < SA_DENSITY_TYPES; i++) {
if (softc->density_type_bits[i] & SRDS_MEDIA)
softc->density_info_valid[i] = 0;
}
/*
* Inform users if tape state if frozen....
*/
if (softc->flags & SA_FLAG_TAPE_FROZEN) {
xpt_print(periph->path, "tape is now frozen- use an OFFLINE, "
"REWIND or MTEOM command to clear this state.\n");
}
/* release the device if it is no longer mounted */
if ((softc->flags & SA_FLAG_TAPE_MOUNTED) == 0)
sareservereleaseunit(periph, FALSE);
cam_periph_unhold(periph);
cam_periph_unlock(periph);
cam_periph_release(periph);
return (error);
}
/*
* Actually translate the requested transfer into one the physical driver
* can understand. The transfer is described by a buf and will include
* only one physical transfer.
*/
static void
sastrategy(struct bio *bp)
{
struct cam_periph *periph;
struct sa_softc *softc;
bp->bio_resid = bp->bio_bcount;
if (SA_IS_CTRL(bp->bio_dev)) {
biofinish(bp, NULL, EINVAL);
return;
}
periph = (struct cam_periph *)bp->bio_dev->si_drv1;
cam_periph_lock(periph);
softc = (struct sa_softc *)periph->softc;
if (softc->flags & SA_FLAG_INVALID) {
cam_periph_unlock(periph);
biofinish(bp, NULL, ENXIO);
return;
}
if (softc->flags & SA_FLAG_TAPE_FROZEN) {
cam_periph_unlock(periph);
biofinish(bp, NULL, EPERM);
return;
}
/*
* This should actually never occur as the write(2)
* system call traps attempts to write to a read-only
* file descriptor.
*/
if (bp->bio_cmd == BIO_WRITE && softc->open_rdonly) {
cam_periph_unlock(periph);
biofinish(bp, NULL, EBADF);
return;
}
if (softc->open_pending_mount) {
int error = samount(periph, 0, bp->bio_dev);
if (error) {
cam_periph_unlock(periph);
biofinish(bp, NULL, ENXIO);
return;
}
saprevent(periph, PR_PREVENT);
softc->open_pending_mount = 0;
}
/*
* If it's a null transfer, return immediately
*/
if (bp->bio_bcount == 0) {
cam_periph_unlock(periph);
biodone(bp);
return;
}
/* valid request? */
if (softc->flags & SA_FLAG_FIXED) {
/*
* Fixed block device. The byte count must
* be a multiple of our block size.
*/
if (((softc->blk_mask != ~0) &&
((bp->bio_bcount & softc->blk_mask) != 0)) ||
((softc->blk_mask == ~0) &&
((bp->bio_bcount % softc->min_blk) != 0))) {
xpt_print(periph->path, "Invalid request. Fixed block "
"device requests must be a multiple of %d bytes\n",
softc->min_blk);
cam_periph_unlock(periph);
biofinish(bp, NULL, EINVAL);
return;
}
} else if ((bp->bio_bcount > softc->max_blk) ||
(bp->bio_bcount < softc->min_blk) ||
(bp->bio_bcount & softc->blk_mask) != 0) {
xpt_print_path(periph->path);
printf("Invalid request. Variable block "
"device requests must be ");
if (softc->blk_mask != 0) {
printf("a multiple of %d ", (0x1 << softc->blk_gran));
}
printf("between %d and %d bytes\n", softc->min_blk,
softc->max_blk);
cam_periph_unlock(periph);
biofinish(bp, NULL, EINVAL);
return;
}
/*
* Place it at the end of the queue.
*/
bioq_insert_tail(&softc->bio_queue, bp);
softc->queue_count++;
#if 0
CAM_DEBUG(periph->path, CAM_DEBUG_INFO,
("sastrategy: queuing a %ld %s byte %s\n", bp->bio_bcount,
(softc->flags & SA_FLAG_FIXED)? "fixed" : "variable",
(bp->bio_cmd == BIO_READ)? "read" : "write"));
#endif
if (softc->queue_count > 1) {
CAM_DEBUG(periph->path, CAM_DEBUG_INFO,
("sastrategy: queue count now %d\n", softc->queue_count));
}
/*
* Schedule ourselves for performing the work.
*/
xpt_schedule(periph, CAM_PRIORITY_NORMAL);
cam_periph_unlock(periph);
return;
}
static int
sasetsili(struct cam_periph *periph, struct mtparamset *ps, int num_params)
{
uint32_t sili_blocksize;
struct sa_softc *softc;
int error;
error = 0;
softc = (struct sa_softc *)periph->softc;
if (ps->value_type != MT_PARAM_SET_SIGNED) {
snprintf(ps->error_str, sizeof(ps->error_str),
"sili is a signed parameter");
goto bailout;
}
if ((ps->value.value_signed < 0)
|| (ps->value.value_signed > 1)) {
snprintf(ps->error_str, sizeof(ps->error_str),
"invalid sili value %jd", (intmax_t)ps->value.value_signed);
goto bailout_error;
}
/*
* We only set the SILI flag in variable block
* mode. You'll get a check condition in fixed
* block mode if things don't line up in any case.
*/
if (softc->flags & SA_FLAG_FIXED) {
snprintf(ps->error_str, sizeof(ps->error_str),
"can't set sili bit in fixed block mode");
goto bailout_error;
}
if (softc->sili == ps->value.value_signed)
goto bailout;
if (ps->value.value_signed == 1)
sili_blocksize = 4;
else
sili_blocksize = 0;
error = sasetparams(periph, SA_PARAM_BLOCKSIZE,
sili_blocksize, 0, 0, SF_QUIET_IR);
if (error != 0) {
snprintf(ps->error_str, sizeof(ps->error_str),
"sasetparams() returned error %d", error);
goto bailout_error;
}
softc->sili = ps->value.value_signed;
bailout:
ps->status = MT_PARAM_STATUS_OK;
return (error);
bailout_error:
ps->status = MT_PARAM_STATUS_ERROR;
if (error == 0)
error = EINVAL;
return (error);
}
static int
saseteotwarn(struct cam_periph *periph, struct mtparamset *ps, int num_params)
{
struct sa_softc *softc;
int error;
error = 0;
softc = (struct sa_softc *)periph->softc;
if (ps->value_type != MT_PARAM_SET_SIGNED) {
snprintf(ps->error_str, sizeof(ps->error_str),
"eot_warn is a signed parameter");
ps->status = MT_PARAM_STATUS_ERROR;
goto bailout;
}
if ((ps->value.value_signed < 0)
|| (ps->value.value_signed > 1)) {
snprintf(ps->error_str, sizeof(ps->error_str),
"invalid eot_warn value %jd\n",
(intmax_t)ps->value.value_signed);
ps->status = MT_PARAM_STATUS_ERROR;
goto bailout;
}
softc->eot_warn = ps->value.value_signed;
ps->status = MT_PARAM_STATUS_OK;
bailout:
if (ps->status != MT_PARAM_STATUS_OK)
error = EINVAL;
return (error);
}
static void
safillprot(struct sa_softc *softc, int *indent, struct sbuf *sb)
{
int tmpint;
SASBADDNODE(sb, *indent, protection);
if (softc->flags & SA_FLAG_PROTECT_SUPP)
tmpint = 1;
else
tmpint = 0;
SASBADDINTDESC(sb, *indent, tmpint, %d, protection_supported,
"Set to 1 if protection information is supported");
if ((tmpint != 0)
&& (softc->prot_info.cur_prot_state.initialized != 0)) {
struct sa_prot_state *prot;
prot = &softc->prot_info.cur_prot_state;
SASBADDUINTDESC(sb, *indent, prot->prot_method, %u,
prot_method, "Current Protection Method");
SASBADDUINTDESC(sb, *indent, prot->pi_length, %u,
pi_length, "Length of Protection Information");
SASBADDUINTDESC(sb, *indent, prot->lbp_w, %u,
lbp_w, "Check Protection on Writes");
SASBADDUINTDESC(sb, *indent, prot->lbp_r, %u,
lbp_r, "Check and Include Protection on Reads");
SASBADDUINTDESC(sb, *indent, prot->rbdp, %u,
rbdp, "Transfer Protection Information for RECOVER "
"BUFFERED DATA command");
}
SASBENDNODE(sb, *indent, protection);
}
static void
sapopulateprots(struct sa_prot_state *cur_state, struct sa_prot_map *new_table,
int table_ents)
{
int i;
bcopy(sa_prot_table, new_table, min(table_ents * sizeof(*new_table),
sizeof(sa_prot_table)));
table_ents = min(table_ents, SA_NUM_PROT_ENTS);
for (i = 0; i < table_ents; i++)
new_table[i].value = (uint32_t *)((uint8_t *)cur_state +
new_table[i].offset);
return;
}
static struct sa_prot_map *
safindprotent(char *name, struct sa_prot_map *table, int table_ents)
{
char *prot_name = "protection.";
int i, prot_len;
prot_len = strlen(prot_name);
/*
* This shouldn't happen, but we check just in case.
*/
if (strncmp(name, prot_name, prot_len) != 0)
goto bailout;
for (i = 0; i < table_ents; i++) {
if (strcmp(&name[prot_len], table[i].name) != 0)
continue;
return (&table[i]);
}
bailout:
return (NULL);
}
static int
sasetprotents(struct cam_periph *periph, struct mtparamset *ps, int num_params)
{
struct sa_softc *softc;
struct sa_prot_map prot_ents[SA_NUM_PROT_ENTS];
struct sa_prot_state new_state;
int error;
int i;
softc = (struct sa_softc *)periph->softc;
error = 0;
/*
* Make sure that this tape drive supports protection information.
* Otherwise we can't set anything.
*/
if ((softc->flags & SA_FLAG_PROTECT_SUPP) == 0) {
snprintf(ps[0].error_str, sizeof(ps[0].error_str),
"Protection information is not supported for this device");
ps[0].status = MT_PARAM_STATUS_ERROR;
goto bailout;
}
/*
* We can't operate with physio(9) splitting enabled, because there
* is no way to insure (especially in variable block mode) that
* what the user writes (with a checksum block at the end) will
* make it into the sa(4) driver intact.
*/
if ((softc->si_flags & SI_NOSPLIT) == 0) {
snprintf(ps[0].error_str, sizeof(ps[0].error_str),
"Protection information cannot be enabled with I/O "
"splitting");
ps[0].status = MT_PARAM_STATUS_ERROR;
goto bailout;
}
/*
* Take the current cached protection state and use that as the
* basis for our new entries.
*/
bcopy(&softc->prot_info.cur_prot_state, &new_state, sizeof(new_state));
/*
* Populate the table mapping property names to pointers into the
* state structure.
*/
sapopulateprots(&new_state, prot_ents, SA_NUM_PROT_ENTS);
/*
* For each parameter the user passed in, make sure the name, type
* and value are valid.
*/
for (i = 0; i < num_params; i++) {
struct sa_prot_map *ent;
ent = safindprotent(ps[i].value_name, prot_ents,
SA_NUM_PROT_ENTS);
if (ent == NULL) {
ps[i].status = MT_PARAM_STATUS_ERROR;
snprintf(ps[i].error_str, sizeof(ps[i].error_str),
"Invalid protection entry name %s",
ps[i].value_name);
error = EINVAL;
goto bailout;
}
if (ent->param_type != ps[i].value_type) {
ps[i].status = MT_PARAM_STATUS_ERROR;
snprintf(ps[i].error_str, sizeof(ps[i].error_str),
"Supplied type %d does not match actual type %d",
ps[i].value_type, ent->param_type);
error = EINVAL;
goto bailout;
}
if ((ps[i].value.value_unsigned < ent->min_val)
|| (ps[i].value.value_unsigned > ent->max_val)) {
ps[i].status = MT_PARAM_STATUS_ERROR;
snprintf(ps[i].error_str, sizeof(ps[i].error_str),
"Value %ju is outside valid range %u - %u",
(uintmax_t)ps[i].value.value_unsigned, ent->min_val,
ent->max_val);
error = EINVAL;
goto bailout;
}
*(ent->value) = ps[i].value.value_unsigned;
}
/*
* Actually send the protection settings to the drive.
*/
error = sasetprot(periph, &new_state);
if (error != 0) {
for (i = 0; i < num_params; i++) {
ps[i].status = MT_PARAM_STATUS_ERROR;
snprintf(ps[i].error_str, sizeof(ps[i].error_str),
"Unable to set parameter, see dmesg(8)");
}
goto bailout;
}
/*
* Let the user know that his settings were stored successfully.
*/
for (i = 0; i < num_params; i++)
ps[i].status = MT_PARAM_STATUS_OK;
bailout:
return (error);
}
/*
* Entry handlers generally only handle a single entry. Node handlers will
* handle a contiguous range of parameters to set in a single call.
*/
typedef enum {
SA_PARAM_TYPE_ENTRY,
SA_PARAM_TYPE_NODE
} sa_param_type;
struct sa_param_ent {
char *name;
sa_param_type param_type;
int (*set_func)(struct cam_periph *periph, struct mtparamset *ps,
int num_params);
} sa_param_table[] = {
{"sili", SA_PARAM_TYPE_ENTRY, sasetsili },
{"eot_warn", SA_PARAM_TYPE_ENTRY, saseteotwarn },
{"protection.", SA_PARAM_TYPE_NODE, sasetprotents }
};
static struct sa_param_ent *
safindparament(struct mtparamset *ps)
{
unsigned int i;
for (i = 0; i < sizeof(sa_param_table) /sizeof(sa_param_table[0]); i++){
/*
* For entries, we compare all of the characters. For
* nodes, we only compare the first N characters. The node
* handler will decode the rest.
*/
if (sa_param_table[i].param_type == SA_PARAM_TYPE_ENTRY) {
if (strcmp(ps->value_name, sa_param_table[i].name) != 0)
continue;
} else {
if (strncmp(ps->value_name, sa_param_table[i].name,
strlen(sa_param_table[i].name)) != 0)
continue;
}
return (&sa_param_table[i]);
}
return (NULL);
}
/*
* Go through a list of parameters, coalescing contiguous parameters with
* the same parent node into a single call to a set_func.
*/
static int
saparamsetlist(struct cam_periph *periph, struct mtsetlist *list,
int need_copy)
{
int i, contig_ents;
int error;
struct mtparamset *params, *first;
struct sa_param_ent *first_ent;
error = 0;
params = NULL;
if (list->num_params == 0)
/* Nothing to do */
goto bailout;
/*
* Verify that the user has the correct structure size.
*/
if ((list->num_params * sizeof(struct mtparamset)) !=
list->param_len) {
xpt_print(periph->path, "%s: length of params %d != "
"sizeof(struct mtparamset) %zd * num_params %d\n",
__func__, list->param_len, sizeof(struct mtparamset),
list->num_params);
error = EINVAL;
goto bailout;
}
if (need_copy != 0) {
/*
* XXX KDM will dropping the lock cause an issue here?
*/
cam_periph_unlock(periph);
params = malloc(list->param_len, M_SCSISA, M_WAITOK | M_ZERO);
error = copyin(list->params, params, list->param_len);
cam_periph_lock(periph);
if (error != 0)
goto bailout;
} else {
params = list->params;
}
contig_ents = 0;
first = NULL;
first_ent = NULL;
for (i = 0; i < list->num_params; i++) {
struct sa_param_ent *ent;
ent = safindparament(&params[i]);
if (ent == NULL) {
snprintf(params[i].error_str,
sizeof(params[i].error_str),
"%s: cannot find parameter %s", __func__,
params[i].value_name);
params[i].status = MT_PARAM_STATUS_ERROR;
break;
}
if (first != NULL) {
if (first_ent == ent) {
/*
* We're still in a contiguous list of
* parameters that can be handled by one
* node handler.
*/
contig_ents++;
continue;
} else {
error = first_ent->set_func(periph, first,
contig_ents);
first = NULL;
first_ent = NULL;
contig_ents = 0;
if (error != 0) {
error = 0;
break;
}
}
}
if (ent->param_type == SA_PARAM_TYPE_NODE) {
first = &params[i];
first_ent = ent;
contig_ents = 1;
} else {
error = ent->set_func(periph, &params[i], 1);
if (error != 0) {
error = 0;
break;
}
}
}
if (first != NULL)
first_ent->set_func(periph, first, contig_ents);
bailout:
if (need_copy != 0) {
if (error != EFAULT) {
cam_periph_unlock(periph);
copyout(params, list->params, list->param_len);
cam_periph_lock(periph);
}
free(params, M_SCSISA);
}
return (error);
}
static int
sagetparams_common(struct cdev *dev, struct cam_periph *periph)
{
struct sa_softc *softc;
u_int8_t write_protect;
int comp_enabled, comp_supported, error;
softc = (struct sa_softc *)periph->softc;
if (softc->open_pending_mount)
return (0);
/* The control device may issue getparams() if there are no opens. */
if (SA_IS_CTRL(dev) && (softc->flags & SA_FLAG_OPEN) != 0)
return (0);
error = sagetparams(periph, SA_PARAM_ALL, &softc->media_blksize,
&softc->media_density, &softc->media_numblks, &softc->buffer_mode,
&write_protect, &softc->speed, &comp_supported, &comp_enabled,
&softc->comp_algorithm, NULL, NULL, 0, 0);
if (error)
return (error);
if (write_protect)
softc->flags |= SA_FLAG_TAPE_WP;
else
softc->flags &= ~SA_FLAG_TAPE_WP;
softc->flags &= ~SA_FLAG_COMPRESSION;
if (comp_supported) {
if (softc->saved_comp_algorithm == 0)
softc->saved_comp_algorithm =
softc->comp_algorithm;
softc->flags |= SA_FLAG_COMP_SUPP;
if (comp_enabled)
softc->flags |= SA_FLAG_COMP_ENABLED;
} else
softc->flags |= SA_FLAG_COMP_UNSUPP;
return (0);
}
#define PENDING_MOUNT_CHECK(softc, periph, dev) \
if (softc->open_pending_mount) { \
error = samount(periph, 0, dev); \
if (error) { \
break; \
} \
saprevent(periph, PR_PREVENT); \
softc->open_pending_mount = 0; \
}
static int
saioctl(struct cdev *dev, u_long cmd, caddr_t arg, int flag, struct thread *td)
{
struct cam_periph *periph;
struct sa_softc *softc;
scsi_space_code spaceop;
int didlockperiph = 0;
int mode;
int error = 0;
mode = SAMODE(dev);
error = 0; /* shut up gcc */
spaceop = 0; /* shut up gcc */
periph = (struct cam_periph *)dev->si_drv1;
cam_periph_lock(periph);
softc = (struct sa_softc *)periph->softc;
/*
* Check for control mode accesses. We allow MTIOCGET and
* MTIOCERRSTAT (but need to be the only one open in order
* to clear latched status), and MTSETBSIZE, MTSETDNSTY
* and MTCOMP (but need to be the only one accessing this
* device to run those).
*/
if (SA_IS_CTRL(dev)) {
switch (cmd) {
case MTIOCGETEOTMODEL:
case MTIOCGET:
case MTIOCEXTGET:
case MTIOCPARAMGET:
case MTIOCRBLIM:
break;
case MTIOCERRSTAT:
/*
* If the periph isn't already locked, lock it
* so our MTIOCERRSTAT can reset latched error stats.
*
* If the periph is already locked, skip it because
* we're just getting status and it'll be up to the
* other thread that has this device open to do
* an MTIOCERRSTAT that would clear latched status.
*/
if ((periph->flags & CAM_PERIPH_LOCKED) == 0) {
error = cam_periph_hold(periph, PRIBIO|PCATCH);
if (error != 0) {
cam_periph_unlock(periph);
return (error);
}
didlockperiph = 1;
}
break;
case MTIOCTOP:
{
struct mtop *mt = (struct mtop *) arg;
/*
* Check to make sure it's an OP we can perform
* with no media inserted.
*/
switch (mt->mt_op) {
case MTSETBSIZ:
case MTSETDNSTY:
case MTCOMP:
mt = NULL;
/* FALLTHROUGH */
default:
break;
}
if (mt != NULL) {
break;
}
/* FALLTHROUGH */
}
case MTIOCSETEOTMODEL:
/*
* We need to acquire the peripheral here rather
* than at open time because we are sharing writable
* access to data structures.
*/
error = cam_periph_hold(periph, PRIBIO|PCATCH);
if (error != 0) {
cam_periph_unlock(periph);
return (error);
}
didlockperiph = 1;
break;
default:
cam_periph_unlock(periph);
return (EINVAL);
}
}
/*
* Find the device that the user is talking about
*/
switch (cmd) {
case MTIOCGET:
{
struct mtget *g = (struct mtget *)arg;
error = sagetparams_common(dev, periph);
if (error)
break;
bzero(g, sizeof(struct mtget));
g->mt_type = MT_ISAR;
if (softc->flags & SA_FLAG_COMP_UNSUPP) {
g->mt_comp = MT_COMP_UNSUPP;
g->mt_comp0 = MT_COMP_UNSUPP;
g->mt_comp1 = MT_COMP_UNSUPP;
g->mt_comp2 = MT_COMP_UNSUPP;
g->mt_comp3 = MT_COMP_UNSUPP;
} else {
if ((softc->flags & SA_FLAG_COMP_ENABLED) == 0) {
g->mt_comp = MT_COMP_DISABLED;
} else {
g->mt_comp = softc->comp_algorithm;
}
g->mt_comp0 = softc->comp_algorithm;
g->mt_comp1 = softc->comp_algorithm;
g->mt_comp2 = softc->comp_algorithm;
g->mt_comp3 = softc->comp_algorithm;
}
g->mt_density = softc->media_density;
g->mt_density0 = softc->media_density;
g->mt_density1 = softc->media_density;
g->mt_density2 = softc->media_density;
g->mt_density3 = softc->media_density;
g->mt_blksiz = softc->media_blksize;
g->mt_blksiz0 = softc->media_blksize;
g->mt_blksiz1 = softc->media_blksize;
g->mt_blksiz2 = softc->media_blksize;
g->mt_blksiz3 = softc->media_blksize;
g->mt_fileno = softc->fileno;
g->mt_blkno = softc->blkno;
g->mt_dsreg = (short) softc->dsreg;
/*
* Yes, we know that this is likely to overflow
*/
if (softc->last_resid_was_io) {
if ((g->mt_resid = (short) softc->last_io_resid) != 0) {
if (SA_IS_CTRL(dev) == 0 || didlockperiph) {
softc->last_io_resid = 0;
}
}
} else {
if ((g->mt_resid = (short)softc->last_ctl_resid) != 0) {
if (SA_IS_CTRL(dev) == 0 || didlockperiph) {
softc->last_ctl_resid = 0;
}
}
}
error = 0;
break;
}
case MTIOCEXTGET:
case MTIOCPARAMGET:
{
struct mtextget *g = (struct mtextget *)arg;
char *tmpstr2;
struct sbuf *sb;
/*
* Report drive status using an XML format.
*/
/*
* XXX KDM will dropping the lock cause any problems here?
*/
cam_periph_unlock(periph);
sb = sbuf_new(NULL, NULL, g->alloc_len, SBUF_FIXEDLEN);
if (sb == NULL) {
g->status = MT_EXT_GET_ERROR;
snprintf(g->error_str, sizeof(g->error_str),
"Unable to allocate %d bytes for status info",
g->alloc_len);
cam_periph_lock(periph);
goto extget_bailout;
}
cam_periph_lock(periph);
if (cmd == MTIOCEXTGET)
error = saextget(dev, periph, sb, g);
else
error = saparamget(softc, sb);
if (error != 0)
goto extget_bailout;
error = sbuf_finish(sb);
if (error == ENOMEM) {
g->status = MT_EXT_GET_NEED_MORE_SPACE;
error = 0;
} else if (error != 0) {
g->status = MT_EXT_GET_ERROR;
snprintf(g->error_str, sizeof(g->error_str),
"Error %d returned from sbuf_finish()", error);
} else
g->status = MT_EXT_GET_OK;
error = 0;
tmpstr2 = sbuf_data(sb);
g->fill_len = strlen(tmpstr2) + 1;
cam_periph_unlock(periph);
error = copyout(tmpstr2, g->status_xml, g->fill_len);
cam_periph_lock(periph);
extget_bailout:
sbuf_delete(sb);
break;
}
case MTIOCPARAMSET:
{
struct mtsetlist list;
struct mtparamset *ps = (struct mtparamset *)arg;
bzero(&list, sizeof(list));
list.num_params = 1;
list.param_len = sizeof(*ps);
list.params = ps;
error = saparamsetlist(periph, &list, /*need_copy*/ 0);
break;
}
case MTIOCSETLIST:
{
struct mtsetlist *list = (struct mtsetlist *)arg;
error = saparamsetlist(periph, list, /*need_copy*/ 1);
break;
}
case MTIOCERRSTAT:
{
struct scsi_tape_errors *sep =
&((union mterrstat *)arg)->scsi_errstat;
CAM_DEBUG(periph->path, CAM_DEBUG_TRACE,
("saioctl: MTIOCERRSTAT\n"));
bzero(sep, sizeof(*sep));
sep->io_resid = softc->last_io_resid;
bcopy((caddr_t) &softc->last_io_sense, sep->io_sense,
sizeof (sep->io_sense));
bcopy((caddr_t) &softc->last_io_cdb, sep->io_cdb,
sizeof (sep->io_cdb));
sep->ctl_resid = softc->last_ctl_resid;
bcopy((caddr_t) &softc->last_ctl_sense, sep->ctl_sense,
sizeof (sep->ctl_sense));
bcopy((caddr_t) &softc->last_ctl_cdb, sep->ctl_cdb,
sizeof (sep->ctl_cdb));
if ((SA_IS_CTRL(dev) == 0 && !softc->open_pending_mount) ||
didlockperiph)
bzero((caddr_t) &softc->errinfo,
sizeof (softc->errinfo));
error = 0;
break;
}
case MTIOCTOP:
{
struct mtop *mt;
int count;
PENDING_MOUNT_CHECK(softc, periph, dev);
mt = (struct mtop *)arg;
CAM_DEBUG(periph->path, CAM_DEBUG_TRACE,
("saioctl: op=0x%x count=0x%x\n",
mt->mt_op, mt->mt_count));
count = mt->mt_count;
switch (mt->mt_op) {
case MTWEOF: /* write an end-of-file marker */
/*
* We don't need to clear the SA_FLAG_TAPE_WRITTEN
* flag because by keeping track of filemarks
* we have last written we know whether or not
* we need to write more when we close the device.
*/
error = sawritefilemarks(periph, count, FALSE, FALSE);
break;
case MTWEOFI:
/* write an end-of-file marker without waiting */
error = sawritefilemarks(periph, count, FALSE, TRUE);
break;
case MTWSS: /* write a setmark */
error = sawritefilemarks(periph, count, TRUE, FALSE);
break;
case MTBSR: /* backward space record */
case MTFSR: /* forward space record */
case MTBSF: /* backward space file */
case MTFSF: /* forward space file */
case MTBSS: /* backward space setmark */
case MTFSS: /* forward space setmark */
case MTEOD: /* space to end of recorded medium */
{
int nmarks;
spaceop = SS_FILEMARKS;
nmarks = softc->filemarks;
error = sacheckeod(periph);
if (error) {
xpt_print(periph->path,
"EOD check prior to spacing failed\n");
softc->flags |= SA_FLAG_EIO_PENDING;
break;
}
nmarks -= softc->filemarks;
switch(mt->mt_op) {
case MTBSR:
count = -count;
/* FALLTHROUGH */
case MTFSR:
spaceop = SS_BLOCKS;
break;
case MTBSF:
count = -count;
/* FALLTHROUGH */
case MTFSF:
break;
case MTBSS:
count = -count;
/* FALLTHROUGH */
case MTFSS:
spaceop = SS_SETMARKS;
break;
case MTEOD:
spaceop = SS_EOD;
count = 0;
nmarks = 0;
break;
default:
error = EINVAL;
break;
}
if (error)
break;
nmarks = softc->filemarks;
/*
* XXX: Why are we checking again?
*/
error = sacheckeod(periph);
if (error)
break;
nmarks -= softc->filemarks;
error = saspace(periph, count - nmarks, spaceop);
/*
* At this point, clear that we've written the tape
* and that we've written any filemarks. We really
* don't know what the applications wishes to do next-
* the sacheckeod's will make sure we terminated the
* tape correctly if we'd been writing, but the next
* action the user application takes will set again
* whether we need to write filemarks.
*/
softc->flags &=
~(SA_FLAG_TAPE_WRITTEN|SA_FLAG_TAPE_FROZEN);
softc->filemarks = 0;
break;
}
case MTREW: /* rewind */
PENDING_MOUNT_CHECK(softc, periph, dev);
(void) sacheckeod(periph);
error = sarewind(periph);
/* see above */
softc->flags &=
~(SA_FLAG_TAPE_WRITTEN|SA_FLAG_TAPE_FROZEN);
softc->flags &= ~SA_FLAG_ERR_PENDING;
softc->filemarks = 0;
break;
case MTERASE: /* erase */
PENDING_MOUNT_CHECK(softc, periph, dev);
error = saerase(periph, count);
softc->flags &=
~(SA_FLAG_TAPE_WRITTEN|SA_FLAG_TAPE_FROZEN);
softc->flags &= ~SA_FLAG_ERR_PENDING;
break;
case MTRETENS: /* re-tension tape */
PENDING_MOUNT_CHECK(softc, periph, dev);
error = saretension(periph);
softc->flags &=
~(SA_FLAG_TAPE_WRITTEN|SA_FLAG_TAPE_FROZEN);
softc->flags &= ~SA_FLAG_ERR_PENDING;
break;
case MTOFFL: /* rewind and put the drive offline */
PENDING_MOUNT_CHECK(softc, periph, dev);
(void) sacheckeod(periph);
/* see above */
softc->flags &= ~SA_FLAG_TAPE_WRITTEN;
softc->filemarks = 0;
error = sarewind(periph);
/* clear the frozen flag anyway */
softc->flags &= ~SA_FLAG_TAPE_FROZEN;
/*
* Be sure to allow media removal before ejecting.
*/
saprevent(periph, PR_ALLOW);
if (error == 0) {
error = saloadunload(periph, FALSE);
if (error == 0) {
softc->flags &= ~SA_FLAG_TAPE_MOUNTED;
}
}
break;
case MTLOAD:
error = saloadunload(periph, TRUE);
break;
case MTNOP: /* no operation, sets status only */
case MTCACHE: /* enable controller cache */
case MTNOCACHE: /* disable controller cache */
error = 0;
break;
case MTSETBSIZ: /* Set block size for device */
PENDING_MOUNT_CHECK(softc, periph, dev);
if ((softc->sili != 0)
&& (count != 0)) {
xpt_print(periph->path, "Can't enter fixed "
"block mode with SILI enabled\n");
error = EINVAL;
break;
}
error = sasetparams(periph, SA_PARAM_BLOCKSIZE, count,
0, 0, 0);
if (error == 0) {
softc->last_media_blksize =
softc->media_blksize;
softc->media_blksize = count;
if (count) {
softc->flags |= SA_FLAG_FIXED;
if (powerof2(count)) {
softc->blk_shift =
ffs(count) - 1;
softc->blk_mask = count - 1;
} else {
softc->blk_mask = ~0;
softc->blk_shift = 0;
}
/*
* Make the user's desire 'persistent'.
*/
softc->quirks &= ~SA_QUIRK_VARIABLE;
softc->quirks |= SA_QUIRK_FIXED;
} else {
softc->flags &= ~SA_FLAG_FIXED;
if (softc->max_blk == 0) {
softc->max_blk = ~0;
}
softc->blk_shift = 0;
if (softc->blk_gran != 0) {
softc->blk_mask =
softc->blk_gran - 1;
} else {
softc->blk_mask = 0;
}
/*
* Make the user's desire 'persistent'.
*/
softc->quirks |= SA_QUIRK_VARIABLE;
softc->quirks &= ~SA_QUIRK_FIXED;
}
}
break;
case MTSETDNSTY: /* Set density for device and mode */
PENDING_MOUNT_CHECK(softc, periph, dev);
if (count > UCHAR_MAX) {
error = EINVAL;
break;
} else {
error = sasetparams(periph, SA_PARAM_DENSITY,
0, count, 0, 0);
}
break;
case MTCOMP: /* enable compression */
PENDING_MOUNT_CHECK(softc, periph, dev);
/*
* Some devices don't support compression, and
* don't like it if you ask them for the
* compression page.
*/
if ((softc->quirks & SA_QUIRK_NOCOMP) ||
(softc->flags & SA_FLAG_COMP_UNSUPP)) {
error = ENODEV;
break;
}
error = sasetparams(periph, SA_PARAM_COMPRESSION,
0, 0, count, SF_NO_PRINT);
break;
default:
error = EINVAL;
}
break;
}
case MTIOCIEOT:
case MTIOCEEOT:
error = 0;
break;
case MTIOCRDSPOS:
PENDING_MOUNT_CHECK(softc, periph, dev);
error = sardpos(periph, 0, (u_int32_t *) arg);
break;
case MTIOCRDHPOS:
PENDING_MOUNT_CHECK(softc, periph, dev);
error = sardpos(periph, 1, (u_int32_t *) arg);
break;
case MTIOCSLOCATE:
case MTIOCHLOCATE: {
struct mtlocate locate_info;
int hard;
bzero(&locate_info, sizeof(locate_info));
locate_info.logical_id = *((uint32_t *)arg);
if (cmd == MTIOCSLOCATE)
hard = 0;
else
hard = 1;
PENDING_MOUNT_CHECK(softc, periph, dev);
error = sasetpos(periph, hard, &locate_info);
break;
}
case MTIOCEXTLOCATE:
PENDING_MOUNT_CHECK(softc, periph, dev);
error = sasetpos(periph, /*hard*/ 0, (struct mtlocate *)arg);
softc->flags &=
~(SA_FLAG_TAPE_WRITTEN|SA_FLAG_TAPE_FROZEN);
softc->flags &= ~SA_FLAG_ERR_PENDING;
softc->filemarks = 0;
break;
case MTIOCGETEOTMODEL:
error = 0;
if (softc->quirks & SA_QUIRK_1FM)
mode = 1;
else
mode = 2;
*((u_int32_t *) arg) = mode;
break;
case MTIOCSETEOTMODEL:
error = 0;
switch (*((u_int32_t *) arg)) {
case 1:
softc->quirks &= ~SA_QUIRK_2FM;
softc->quirks |= SA_QUIRK_1FM;
break;
case 2:
softc->quirks &= ~SA_QUIRK_1FM;
softc->quirks |= SA_QUIRK_2FM;
break;
default:
error = EINVAL;
break;
}
break;
case MTIOCRBLIM: {
struct mtrblim *rblim;
rblim = (struct mtrblim *)arg;
rblim->granularity = softc->blk_gran;
rblim->min_block_length = softc->min_blk;
rblim->max_block_length = softc->max_blk;
break;
}
default:
error = cam_periph_ioctl(periph, cmd, arg, saerror);
break;
}
/*
* Check to see if we cleared a frozen state
*/
if (error == 0 && (softc->flags & SA_FLAG_TAPE_FROZEN)) {
switch(cmd) {
case MTIOCRDSPOS:
case MTIOCRDHPOS:
case MTIOCSLOCATE:
case MTIOCHLOCATE:
/*
* XXX KDM look at this.
*/
softc->fileno = (daddr_t) -1;
softc->blkno = (daddr_t) -1;
softc->rep_blkno = (daddr_t) -1;
softc->rep_fileno = (daddr_t) -1;
softc->partition = (daddr_t) -1;
softc->flags &= ~SA_FLAG_TAPE_FROZEN;
xpt_print(periph->path,
"tape state now unfrozen.\n");
break;
default:
break;
}
}
if (didlockperiph) {
cam_periph_unhold(periph);
}
cam_periph_unlock(periph);
return (error);
}
static void
sainit(void)
{
cam_status status;
/*
* Install a global async callback.
*/
status = xpt_register_async(AC_FOUND_DEVICE, saasync, NULL, NULL);
if (status != CAM_REQ_CMP) {
printf("sa: Failed to attach master async callback "
"due to status 0x%x!\n", status);
}
}
static void
sadevgonecb(void *arg)
{
struct cam_periph *periph;
struct mtx *mtx;
struct sa_softc *softc;
periph = (struct cam_periph *)arg;
softc = (struct sa_softc *)periph->softc;
mtx = cam_periph_mtx(periph);
mtx_lock(mtx);
softc->num_devs_to_destroy--;
if (softc->num_devs_to_destroy == 0) {
int i;
/*
* When we have gotten all of our callbacks, we will get
* no more close calls from devfs. So if we have any
* dangling opens, we need to release the reference held
* for that particular context.
*/
for (i = 0; i < softc->open_count; i++)
cam_periph_release_locked(periph);
softc->open_count = 0;
/*
* Release the reference held for devfs, all of our
* instances are gone now.
*/
cam_periph_release_locked(periph);
}
/*
* We reference the lock directly here, instead of using
* cam_periph_unlock(). The reason is that the final call to
* cam_periph_release_locked() above could result in the periph
* getting freed. If that is the case, dereferencing the periph
* with a cam_periph_unlock() call would cause a page fault.
*/
mtx_unlock(mtx);
}
static void
saoninvalidate(struct cam_periph *periph)
{
struct sa_softc *softc;
softc = (struct sa_softc *)periph->softc;
/*
* De-register any async callbacks.
*/
xpt_register_async(0, saasync, periph, periph->path);
softc->flags |= SA_FLAG_INVALID;
/*
* Return all queued I/O with ENXIO.
* XXX Handle any transactions queued to the card
* with XPT_ABORT_CCB.
*/
bioq_flush(&softc->bio_queue, NULL, ENXIO);
softc->queue_count = 0;
/*
* Tell devfs that all of our devices have gone away, and ask for a
* callback when it has cleaned up its state.
*/
destroy_dev_sched_cb(softc->devs.ctl_dev, sadevgonecb, periph);
destroy_dev_sched_cb(softc->devs.r_dev, sadevgonecb, periph);
destroy_dev_sched_cb(softc->devs.nr_dev, sadevgonecb, periph);
destroy_dev_sched_cb(softc->devs.er_dev, sadevgonecb, periph);
}
static void
sacleanup(struct cam_periph *periph)
{
struct sa_softc *softc;
softc = (struct sa_softc *)periph->softc;
cam_periph_unlock(periph);
if ((softc->flags & SA_FLAG_SCTX_INIT) != 0
&& sysctl_ctx_free(&softc->sysctl_ctx) != 0)
xpt_print(periph->path, "can't remove sysctl context\n");
cam_periph_lock(periph);
devstat_remove_entry(softc->device_stats);
free(softc, M_SCSISA);
}
static void
saasync(void *callback_arg, u_int32_t code,
struct cam_path *path, void *arg)
{
struct cam_periph *periph;
periph = (struct cam_periph *)callback_arg;
switch (code) {
case AC_FOUND_DEVICE:
{
struct ccb_getdev *cgd;
cam_status status;
cgd = (struct ccb_getdev *)arg;
if (cgd == NULL)
break;
if (cgd->protocol != PROTO_SCSI)
break;
if (SID_QUAL(&cgd->inq_data) != SID_QUAL_LU_CONNECTED)
break;
if (SID_TYPE(&cgd->inq_data) != T_SEQUENTIAL)
break;
/*
* Allocate a peripheral instance for
* this device and start the probe
* process.
*/
status = cam_periph_alloc(saregister, saoninvalidate,
sacleanup, sastart,
"sa", CAM_PERIPH_BIO, path,
saasync, AC_FOUND_DEVICE, cgd);
if (status != CAM_REQ_CMP
&& status != CAM_REQ_INPROG)
printf("saasync: Unable to probe new device "
"due to status 0x%x\n", status);
break;
}
default:
cam_periph_async(periph, code, path, arg);
break;
}
}
static void
sasetupdev(struct sa_softc *softc, struct cdev *dev)
{
dev->si_iosize_max = softc->maxio;
dev->si_flags |= softc->si_flags;
/*
* Keep a count of how many non-alias devices we have created,
* so we can make sure we clean them all up on shutdown. Aliases
* are cleaned up when we destroy the device they're an alias for.
*/
if ((dev->si_flags & SI_ALIAS) == 0)
softc->num_devs_to_destroy++;
}
static void
sasysctlinit(void *context, int pending)
{
struct cam_periph *periph;
struct sa_softc *softc;
char tmpstr[80], tmpstr2[80];
periph = (struct cam_periph *)context;
/*
* If the periph is invalid, no need to setup the sysctls.
*/
if (periph->flags & CAM_PERIPH_INVALID)
goto bailout;
softc = (struct sa_softc *)periph->softc;
snprintf(tmpstr, sizeof(tmpstr), "CAM SA unit %d", periph->unit_number);
snprintf(tmpstr2, sizeof(tmpstr2), "%u", periph->unit_number);
sysctl_ctx_init(&softc->sysctl_ctx);
softc->flags |= SA_FLAG_SCTX_INIT;
softc->sysctl_tree = SYSCTL_ADD_NODE(&softc->sysctl_ctx,
SYSCTL_STATIC_CHILDREN(_kern_cam_sa), OID_AUTO, tmpstr2,
CTLFLAG_RD, 0, tmpstr);
if (softc->sysctl_tree == NULL)
goto bailout;
SYSCTL_ADD_INT(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree),
OID_AUTO, "allow_io_split", CTLFLAG_RDTUN | CTLFLAG_NOFETCH,
&softc->allow_io_split, 0, "Allow Splitting I/O");
SYSCTL_ADD_INT(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree),
OID_AUTO, "maxio", CTLFLAG_RD,
&softc->maxio, 0, "Maximum I/O size");
SYSCTL_ADD_INT(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree),
OID_AUTO, "cpi_maxio", CTLFLAG_RD,
&softc->cpi_maxio, 0, "Maximum Controller I/O size");
bailout:
/*
* Release the reference that was held when this task was enqueued.
*/
cam_periph_release(periph);
}
static cam_status
saregister(struct cam_periph *periph, void *arg)
{
struct sa_softc *softc;
struct ccb_getdev *cgd;
struct ccb_pathinq cpi;
struct make_dev_args args;
caddr_t match;
char tmpstr[80];
int error;
cgd = (struct ccb_getdev *)arg;
if (cgd == NULL) {
printf("saregister: no getdev CCB, can't register device\n");
return (CAM_REQ_CMP_ERR);
}
softc = (struct sa_softc *)
malloc(sizeof (*softc), M_SCSISA, M_NOWAIT | M_ZERO);
if (softc == NULL) {
printf("saregister: Unable to probe new device. "
"Unable to allocate softc\n");
return (CAM_REQ_CMP_ERR);
}
softc->scsi_rev = SID_ANSI_REV(&cgd->inq_data);
softc->state = SA_STATE_NORMAL;
softc->fileno = (daddr_t) -1;
softc->blkno = (daddr_t) -1;
softc->rep_fileno = (daddr_t) -1;
softc->rep_blkno = (daddr_t) -1;
softc->partition = (daddr_t) -1;
softc->bop = -1;
softc->eop = -1;
softc->bpew = -1;
bioq_init(&softc->bio_queue);
softc->periph = periph;
periph->softc = softc;
/*
* See if this device has any quirks.
*/
match = cam_quirkmatch((caddr_t)&cgd->inq_data,
(caddr_t)sa_quirk_table,
sizeof(sa_quirk_table)/sizeof(*sa_quirk_table),
sizeof(*sa_quirk_table), scsi_inquiry_match);
if (match != NULL) {
softc->quirks = ((struct sa_quirk_entry *)match)->quirks;
softc->last_media_blksize =
((struct sa_quirk_entry *)match)->prefblk;
} else
softc->quirks = SA_QUIRK_NONE;
/*
* Long format data for READ POSITION was introduced in SSC, which
* was after SCSI-2. (Roughly equivalent to SCSI-3.) If the drive
* reports that it is SCSI-2 or older, it is unlikely to support
* long position data, but it might. Some drives from that era
* claim to be SCSI-2, but do support long position information.
* So, instead of immediately disabling long position information
* for SCSI-2 devices, we'll try one pass through sagetpos(), and
* then disable long position information if we get an error.
*/
if (cgd->inq_data.version <= SCSI_REV_CCS)
softc->quirks |= SA_QUIRK_NO_LONG_POS;
if (cgd->inq_data.spc3_flags & SPC3_SID_PROTECT) {
struct ccb_dev_advinfo cdai;
struct scsi_vpd_extended_inquiry_data ext_inq;
bzero(&ext_inq, sizeof(ext_inq));
xpt_setup_ccb(&cdai.ccb_h, periph->path, CAM_PRIORITY_NORMAL);
cdai.ccb_h.func_code = XPT_DEV_ADVINFO;
cdai.flags = CDAI_FLAG_NONE;
cdai.buftype = CDAI_TYPE_EXT_INQ;
cdai.bufsiz = sizeof(ext_inq);
cdai.buf = (uint8_t *)&ext_inq;
xpt_action((union ccb *)&cdai);
if ((cdai.ccb_h.status & CAM_DEV_QFRZN) != 0)
cam_release_devq(cdai.ccb_h.path, 0, 0, 0, FALSE);
if ((cdai.ccb_h.status == CAM_REQ_CMP)
&& (ext_inq.flags1 & SVPD_EID_SA_SPT_LBP))
softc->flags |= SA_FLAG_PROTECT_SUPP;
}
bzero(&cpi, sizeof(cpi));
xpt_setup_ccb(&cpi.ccb_h, periph->path, CAM_PRIORITY_NORMAL);
cpi.ccb_h.func_code = XPT_PATH_INQ;
xpt_action((union ccb *)&cpi);
/*
* The SA driver supports a blocksize, but we don't know the
* blocksize until we media is inserted. So, set a flag to
* indicate that the blocksize is unavailable right now.
*/
cam_periph_unlock(periph);
softc->device_stats = devstat_new_entry("sa", periph->unit_number, 0,
DEVSTAT_BS_UNAVAILABLE, SID_TYPE(&cgd->inq_data) |
XPORT_DEVSTAT_TYPE(cpi.transport), DEVSTAT_PRIORITY_TAPE);
/*
* Load the default value that is either compiled in, or loaded
* in the global kern.cam.sa.allow_io_split tunable.
*/
softc->allow_io_split = sa_allow_io_split;
/*
* Load a per-instance tunable, if it exists. NOTE that this
* tunable WILL GO AWAY in FreeBSD 11.0.
*/
snprintf(tmpstr, sizeof(tmpstr), "kern.cam.sa.%u.allow_io_split",
periph->unit_number);
TUNABLE_INT_FETCH(tmpstr, &softc->allow_io_split);
/*
* If maxio isn't set, we fall back to DFLTPHYS. Otherwise we take
* the smaller of cpi.maxio or MAXPHYS.
*/
if (cpi.maxio == 0)
softc->maxio = DFLTPHYS;
else if (cpi.maxio > MAXPHYS)
softc->maxio = MAXPHYS;
else
softc->maxio = cpi.maxio;
/*
* Record the controller's maximum I/O size so we can report it to
* the user later.
*/
softc->cpi_maxio = cpi.maxio;
/*
* By default we tell physio that we do not want our I/O split.
* The user needs to have a 1:1 mapping between the size of his
* write to a tape character device and the size of the write
* that actually goes down to the drive.
*/
if (softc->allow_io_split == 0)
softc->si_flags = SI_NOSPLIT;
else
softc->si_flags = 0;
TASK_INIT(&softc->sysctl_task, 0, sasysctlinit, periph);
/*
* If the SIM supports unmapped I/O, let physio know that we can
* handle unmapped buffers.
*/
if (cpi.hba_misc & PIM_UNMAPPED)
softc->si_flags |= SI_UNMAPPED;
/*
* Acquire a reference to the periph before we create the devfs
* instances for it. We'll release this reference once the devfs
* instances have been freed.
*/
if (cam_periph_acquire(periph) != CAM_REQ_CMP) {
xpt_print(periph->path, "%s: lost periph during "
"registration!\n", __func__);
cam_periph_lock(periph);
return (CAM_REQ_CMP_ERR);
}
make_dev_args_init(&args);
args.mda_devsw = &sa_cdevsw;
args.mda_si_drv1 = softc->periph;
args.mda_uid = UID_ROOT;
args.mda_gid = GID_OPERATOR;
args.mda_mode = 0660;
args.mda_unit = SAMINOR(SA_CTLDEV, SA_ATYPE_R);
error = make_dev_s(&args, &softc->devs.ctl_dev, "%s%d.ctl",
periph->periph_name, periph->unit_number);
if (error != 0) {
cam_periph_lock(periph);
return (CAM_REQ_CMP_ERR);
}
sasetupdev(softc, softc->devs.ctl_dev);
args.mda_unit = SAMINOR(SA_NOT_CTLDEV, SA_ATYPE_R);
error = make_dev_s(&args, &softc->devs.r_dev, "%s%d",
periph->periph_name, periph->unit_number);
if (error != 0) {
cam_periph_lock(periph);
return (CAM_REQ_CMP_ERR);
}
sasetupdev(softc, softc->devs.r_dev);
args.mda_unit = SAMINOR(SA_NOT_CTLDEV, SA_ATYPE_NR);
error = make_dev_s(&args, &softc->devs.nr_dev, "n%s%d",
periph->periph_name, periph->unit_number);
if (error != 0) {
cam_periph_lock(periph);
return (CAM_REQ_CMP_ERR);
}
sasetupdev(softc, softc->devs.nr_dev);
args.mda_unit = SAMINOR(SA_NOT_CTLDEV, SA_ATYPE_ER);
error = make_dev_s(&args, &softc->devs.er_dev, "e%s%d",
periph->periph_name, periph->unit_number);
if (error != 0) {
cam_periph_lock(periph);
return (CAM_REQ_CMP_ERR);
}
sasetupdev(softc, softc->devs.er_dev);
cam_periph_lock(periph);
softc->density_type_bits[0] = 0;
softc->density_type_bits[1] = SRDS_MEDIA;
softc->density_type_bits[2] = SRDS_MEDIUM_TYPE;
softc->density_type_bits[3] = SRDS_MEDIUM_TYPE | SRDS_MEDIA;
/*
* Bump the peripheral refcount for the sysctl thread, in case we
* get invalidated before the thread has a chance to run.
*/
cam_periph_acquire(periph);
taskqueue_enqueue(taskqueue_thread, &softc->sysctl_task);
/*
* Add an async callback so that we get
* notified if this device goes away.
*/
xpt_register_async(AC_LOST_DEVICE, saasync, periph, periph->path);
xpt_announce_periph(periph, NULL);
xpt_announce_quirks(periph, softc->quirks, SA_QUIRK_BIT_STRING);
return (CAM_REQ_CMP);
}
static void
sastart(struct cam_periph *periph, union ccb *start_ccb)
{
struct sa_softc *softc;
softc = (struct sa_softc *)periph->softc;
CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sastart\n"));
switch (softc->state) {
case SA_STATE_NORMAL:
{
/* Pull a buffer from the queue and get going on it */
struct bio *bp;
/*
* See if there is a buf with work for us to do..
*/
bp = bioq_first(&softc->bio_queue);
if (bp == NULL) {
xpt_release_ccb(start_ccb);
} else if ((softc->flags & SA_FLAG_ERR_PENDING) != 0) {
struct bio *done_bp;
again:
softc->queue_count--;
bioq_remove(&softc->bio_queue, bp);
bp->bio_resid = bp->bio_bcount;
done_bp = bp;
if ((softc->flags & SA_FLAG_EOM_PENDING) != 0) {
/*
* We have two different behaviors for
* writes when we hit either Early Warning
* or the PEWZ (Programmable Early Warning
* Zone). The default behavior is that
* for all writes that are currently
* queued after the write where we saw the
* early warning, we will return the write
* with the residual equal to the count.
* i.e. tell the application that 0 bytes
* were written.
*
* The alternate behavior, which is enabled
* when eot_warn is set, is that in
* addition to setting the residual equal
* to the count, we will set the error
* to ENOSPC.
*
* In either case, once queued writes are
* cleared out, we clear the error flag
* (see below) and the application is free to
* attempt to write more.
*/
if (softc->eot_warn != 0) {
bp->bio_flags |= BIO_ERROR;
bp->bio_error = ENOSPC;
} else
bp->bio_error = 0;
} else if ((softc->flags & SA_FLAG_EOF_PENDING) != 0) {
/*
* This can only happen if we're reading
* in fixed length mode. In this case,
* we dump the rest of the list the
* same way.
*/
bp->bio_error = 0;
if (bioq_first(&softc->bio_queue) != NULL) {
biodone(done_bp);
goto again;
}
} else if ((softc->flags & SA_FLAG_EIO_PENDING) != 0) {
bp->bio_error = EIO;
bp->bio_flags |= BIO_ERROR;
}
bp = bioq_first(&softc->bio_queue);
/*
* Only if we have no other buffers queued up
* do we clear the pending error flag.
*/
if (bp == NULL)
softc->flags &= ~SA_FLAG_ERR_PENDING;
CAM_DEBUG(periph->path, CAM_DEBUG_INFO,
("sastart- ERR_PENDING now 0x%x, bp is %sNULL, "
"%d more buffers queued up\n",
(softc->flags & SA_FLAG_ERR_PENDING),
(bp != NULL)? "not " : " ", softc->queue_count));
xpt_release_ccb(start_ccb);
biodone(done_bp);
} else {
u_int32_t length;
bioq_remove(&softc->bio_queue, bp);
softc->queue_count--;
length = bp->bio_bcount;
if ((softc->flags & SA_FLAG_FIXED) != 0) {
if (softc->blk_shift != 0) {
length = length >> softc->blk_shift;
} else if (softc->media_blksize != 0) {
length = length / softc->media_blksize;
} else {
bp->bio_error = EIO;
xpt_print(periph->path, "zero blocksize"
" for FIXED length writes?\n");
biodone(bp);
break;
}
#if 0
CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_INFO,
("issuing a %d fixed record %s\n",
length, (bp->bio_cmd == BIO_READ)? "read" :
"write"));
#endif
} else {
#if 0
CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_INFO,
("issuing a %d variable byte %s\n",
length, (bp->bio_cmd == BIO_READ)? "read" :
"write"));
#endif
}
devstat_start_transaction_bio(softc->device_stats, bp);
/*
* Some people have theorized that we should
* suppress illegal length indication if we are
* running in variable block mode so that we don't
* have to request sense every time our requested
* block size is larger than the written block.
* The residual information from the ccb allows
* us to identify this situation anyway. The only
* problem with this is that we will not get
* information about blocks that are larger than
* our read buffer unless we set the block size
* in the mode page to something other than 0.
*
* I believe that this is a non-issue. If user apps
* don't adjust their read size to match our record
* size, that's just life. Anyway, the typical usage
* would be to issue, e.g., 64KB reads and occasionally
* have to do deal with 512 byte or 1KB intermediate
* records.
*
* That said, though, we now support setting the
* SILI bit on reads, and we set the blocksize to 4
* bytes when we do that. This gives us
* compatibility with software that wants this,
* although the only real difference between that
* and not setting the SILI bit on reads is that we
* won't get a check condition on reads where our
* request size is larger than the block on tape.
* That probably only makes a real difference in
* non-packetized SCSI, where you have to go back
* to the drive to request sense and thus incur
* more latency.
*/
softc->dsreg = (bp->bio_cmd == BIO_READ)?
MTIO_DSREG_RD : MTIO_DSREG_WR;
scsi_sa_read_write(&start_ccb->csio, 0, sadone,
MSG_SIMPLE_Q_TAG, (bp->bio_cmd == BIO_READ ?
SCSI_RW_READ : SCSI_RW_WRITE) |
((bp->bio_flags & BIO_UNMAPPED) != 0 ?
SCSI_RW_BIO : 0), softc->sili,
(softc->flags & SA_FLAG_FIXED) != 0, length,
(bp->bio_flags & BIO_UNMAPPED) != 0 ? (void *)bp :
bp->bio_data, bp->bio_bcount, SSD_FULL_SIZE,
IO_TIMEOUT);
start_ccb->ccb_h.ccb_pflags &= ~SA_POSITION_UPDATED;
start_ccb->ccb_h.ccb_bp = bp;
bp = bioq_first(&softc->bio_queue);
xpt_action(start_ccb);
}
if (bp != NULL) {
/* Have more work to do, so ensure we stay scheduled */
xpt_schedule(periph, CAM_PRIORITY_NORMAL);
}
break;
}
case SA_STATE_ABNORMAL:
default:
panic("state 0x%x in sastart", softc->state);
break;
}
}
static void
sadone(struct cam_periph *periph, union ccb *done_ccb)
{
struct sa_softc *softc;
struct ccb_scsiio *csio;
struct bio *bp;
int error;
softc = (struct sa_softc *)periph->softc;
csio = &done_ccb->csio;
softc->dsreg = MTIO_DSREG_REST;
bp = (struct bio *)done_ccb->ccb_h.ccb_bp;
error = 0;
if ((done_ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
if ((error = saerror(done_ccb, 0, 0)) == ERESTART) {
/*
* A retry was scheduled, so just return.
*/
return;
}
}
if (error == EIO) {
/*
* Catastrophic error. Mark the tape as frozen
* (we no longer know tape position).
*
* Return all queued I/O with EIO, and unfreeze
* our queue so that future transactions that
* attempt to fix this problem can get to the
* device.
*
*/
softc->flags |= SA_FLAG_TAPE_FROZEN;
bioq_flush(&softc->bio_queue, NULL, EIO);
}
if (error != 0) {
bp->bio_resid = bp->bio_bcount;
bp->bio_error = error;
bp->bio_flags |= BIO_ERROR;
/*
* In the error case, position is updated in saerror.
*/
} else {
bp->bio_resid = csio->resid;
bp->bio_error = 0;
if (csio->resid != 0) {
bp->bio_flags |= BIO_ERROR;
}
if (bp->bio_cmd == BIO_WRITE) {
softc->flags |= SA_FLAG_TAPE_WRITTEN;
softc->filemarks = 0;
}
if (!(csio->ccb_h.ccb_pflags & SA_POSITION_UPDATED) &&
(softc->blkno != (daddr_t) -1)) {
if ((softc->flags & SA_FLAG_FIXED) != 0) {
u_int32_t l;
if (softc->blk_shift != 0) {
l = bp->bio_bcount >>
softc->blk_shift;
} else {
l = bp->bio_bcount /
softc->media_blksize;
}
softc->blkno += (daddr_t) l;
} else {
softc->blkno++;
}
}
}
/*
* If we had an error (immediate or pending),
* release the device queue now.
*/
if (error || (softc->flags & SA_FLAG_ERR_PENDING))
cam_release_devq(done_ccb->ccb_h.path, 0, 0, 0, 0);
if (error || bp->bio_resid) {
CAM_DEBUG(periph->path, CAM_DEBUG_INFO,
("error %d resid %ld count %ld\n", error,
bp->bio_resid, bp->bio_bcount));
}
biofinish(bp, softc->device_stats, 0);
xpt_release_ccb(done_ccb);
}
/*
* Mount the tape (make sure it's ready for I/O).
*/
static int
samount(struct cam_periph *periph, int oflags, struct cdev *dev)
{
struct sa_softc *softc;
union ccb *ccb;
int error;
/*
* oflags can be checked for 'kind' of open (read-only check) - later
* dev can be checked for a control-mode or compression open - later
*/
UNUSED_PARAMETER(oflags);
UNUSED_PARAMETER(dev);
softc = (struct sa_softc *)periph->softc;
/*
* This should determine if something has happend since the last
* open/mount that would invalidate the mount. We do *not* want
* to retry this command- we just want the status. But we only
* do this if we're mounted already- if we're not mounted,
* we don't care about the unit read state and can instead use
* this opportunity to attempt to reserve the tape unit.
*/
if (softc->flags & SA_FLAG_TAPE_MOUNTED) {
ccb = cam_periph_getccb(periph, 1);
scsi_test_unit_ready(&ccb->csio, 0, sadone,
MSG_SIMPLE_Q_TAG, SSD_FULL_SIZE, IO_TIMEOUT);
error = cam_periph_runccb(ccb, saerror, 0, SF_NO_PRINT,
softc->device_stats);
if (error == ENXIO) {
softc->flags &= ~SA_FLAG_TAPE_MOUNTED;
scsi_test_unit_ready(&ccb->csio, 0, sadone,
MSG_SIMPLE_Q_TAG, SSD_FULL_SIZE, IO_TIMEOUT);
error = cam_periph_runccb(ccb, saerror, 0, SF_NO_PRINT,
softc->device_stats);
} else if (error) {
/*
* We don't need to freeze the tape because we
* will now attempt to rewind/load it.
*/
softc->flags &= ~SA_FLAG_TAPE_MOUNTED;
if (CAM_DEBUGGED(periph->path, CAM_DEBUG_INFO)) {
xpt_print(periph->path,
"error %d on TUR in samount\n", error);
}
}
} else {
error = sareservereleaseunit(periph, TRUE);
if (error) {
return (error);
}
ccb = cam_periph_getccb(periph, 1);
scsi_test_unit_ready(&ccb->csio, 0, sadone,
MSG_SIMPLE_Q_TAG, SSD_FULL_SIZE, IO_TIMEOUT);
error = cam_periph_runccb(ccb, saerror, 0, SF_NO_PRINT,
softc->device_stats);
}
if ((softc->flags & SA_FLAG_TAPE_MOUNTED) == 0) {
struct scsi_read_block_limits_data *rblim = NULL;
int comp_enabled, comp_supported;
u_int8_t write_protect, guessing = 0;
/*
* Clear out old state.
*/
softc->flags &= ~(SA_FLAG_TAPE_WP|SA_FLAG_TAPE_WRITTEN|
SA_FLAG_ERR_PENDING|SA_FLAG_COMPRESSION);
softc->filemarks = 0;
/*
* *Very* first off, make sure we're loaded to BOT.
*/
scsi_load_unload(&ccb->csio, 2, sadone, MSG_SIMPLE_Q_TAG, FALSE,
FALSE, FALSE, 1, SSD_FULL_SIZE, REWIND_TIMEOUT);
error = cam_periph_runccb(ccb, saerror, 0, SF_NO_PRINT,
softc->device_stats);
/*
* In case this doesn't work, do a REWIND instead
*/
if (error) {
scsi_rewind(&ccb->csio, 2, sadone, MSG_SIMPLE_Q_TAG,
FALSE, SSD_FULL_SIZE, REWIND_TIMEOUT);
error = cam_periph_runccb(ccb, saerror, 0, SF_NO_PRINT,
softc->device_stats);
}
if (error) {
xpt_release_ccb(ccb);
goto exit;
}
/*
* Do a dummy test read to force access to the
* media so that the drive will really know what's
* there. We actually don't really care what the
* blocksize on tape is and don't expect to really
* read a full record.
*/
rblim = (struct scsi_read_block_limits_data *)
malloc(8192, M_SCSISA, M_NOWAIT);
if (rblim == NULL) {
xpt_print(periph->path, "no memory for test read\n");
xpt_release_ccb(ccb);
error = ENOMEM;
goto exit;
}
if ((softc->quirks & SA_QUIRK_NODREAD) == 0) {
scsi_sa_read_write(&ccb->csio, 0, sadone,
MSG_SIMPLE_Q_TAG, 1, FALSE, 0, 8192,
(void *) rblim, 8192, SSD_FULL_SIZE,
IO_TIMEOUT);
(void) cam_periph_runccb(ccb, saerror, 0, SF_NO_PRINT,
softc->device_stats);
scsi_rewind(&ccb->csio, 1, sadone, MSG_SIMPLE_Q_TAG,
FALSE, SSD_FULL_SIZE, REWIND_TIMEOUT);
error = cam_periph_runccb(ccb, saerror, CAM_RETRY_SELTO,
SF_NO_PRINT | SF_RETRY_UA,
softc->device_stats);
if (error) {
xpt_print(periph->path,
"unable to rewind after test read\n");
xpt_release_ccb(ccb);
goto exit;
}
}
/*
* Next off, determine block limits.
*/
scsi_read_block_limits(&ccb->csio, 5, sadone, MSG_SIMPLE_Q_TAG,
rblim, SSD_FULL_SIZE, SCSIOP_TIMEOUT);
error = cam_periph_runccb(ccb, saerror, CAM_RETRY_SELTO,
SF_NO_PRINT | SF_RETRY_UA, softc->device_stats);
xpt_release_ccb(ccb);
if (error != 0) {
/*
* If it's less than SCSI-2, READ BLOCK LIMITS is not
* a MANDATORY command. Anyway- it doesn't matter-
* we can proceed anyway.
*/
softc->blk_gran = 0;
softc->max_blk = ~0;
softc->min_blk = 0;
} else {
if (softc->scsi_rev >= SCSI_REV_SPC) {
softc->blk_gran = RBL_GRAN(rblim);
} else {
softc->blk_gran = 0;
}
/*
* We take max_blk == min_blk to mean a default to
* fixed mode- but note that whatever we get out of
* sagetparams below will actually determine whether
* we are actually *in* fixed mode.
*/
softc->max_blk = scsi_3btoul(rblim->maximum);
softc->min_blk = scsi_2btoul(rblim->minimum);
}
/*
* Next, perform a mode sense to determine
* current density, blocksize, compression etc.
*/
error = sagetparams(periph, SA_PARAM_ALL,
&softc->media_blksize,
&softc->media_density,
&softc->media_numblks,
&softc->buffer_mode, &write_protect,
&softc->speed, &comp_supported,
&comp_enabled, &softc->comp_algorithm,
NULL, NULL, 0, 0);
if (error != 0) {
/*
* We could work a little harder here. We could
* adjust our attempts to get information. It
* might be an ancient tape drive. If someone
* nudges us, we'll do that.
*/
goto exit;
}
/*
* If no quirk has determined that this is a device that is
* preferred to be in fixed or variable mode, now is the time
* to find out.
*/
if ((softc->quirks & (SA_QUIRK_FIXED|SA_QUIRK_VARIABLE)) == 0) {
guessing = 1;
/*
* This could be expensive to find out. Luckily we
* only need to do this once. If we start out in
* 'default' mode, try and set ourselves to one
* of the densities that would determine a wad
* of other stuff. Go from highest to lowest.
*/
if (softc->media_density == SCSI_DEFAULT_DENSITY) {
int i;
static u_int8_t ctry[] = {
SCSI_DENSITY_HALFINCH_PE,
SCSI_DENSITY_HALFINCH_6250C,
SCSI_DENSITY_HALFINCH_6250,
SCSI_DENSITY_HALFINCH_1600,
SCSI_DENSITY_HALFINCH_800,
SCSI_DENSITY_QIC_4GB,
SCSI_DENSITY_QIC_2GB,
SCSI_DENSITY_QIC_525_320,
SCSI_DENSITY_QIC_150,
SCSI_DENSITY_QIC_120,
SCSI_DENSITY_QIC_24,
SCSI_DENSITY_QIC_11_9TRK,
SCSI_DENSITY_QIC_11_4TRK,
SCSI_DENSITY_QIC_1320,
SCSI_DENSITY_QIC_3080,
0
};
for (i = 0; ctry[i]; i++) {
error = sasetparams(periph,
SA_PARAM_DENSITY, 0, ctry[i],
0, SF_NO_PRINT);
if (error == 0) {
softc->media_density = ctry[i];
break;
}
}
}
switch (softc->media_density) {
case SCSI_DENSITY_QIC_11_4TRK:
case SCSI_DENSITY_QIC_11_9TRK:
case SCSI_DENSITY_QIC_24:
case SCSI_DENSITY_QIC_120:
case SCSI_DENSITY_QIC_150:
case SCSI_DENSITY_QIC_525_320:
case SCSI_DENSITY_QIC_1320:
case SCSI_DENSITY_QIC_3080:
softc->quirks &= ~SA_QUIRK_2FM;
softc->quirks |= SA_QUIRK_FIXED|SA_QUIRK_1FM;
softc->last_media_blksize = 512;
break;
case SCSI_DENSITY_QIC_4GB:
case SCSI_DENSITY_QIC_2GB:
softc->quirks &= ~SA_QUIRK_2FM;
softc->quirks |= SA_QUIRK_FIXED|SA_QUIRK_1FM;
softc->last_media_blksize = 1024;
break;
default:
softc->last_media_blksize =
softc->media_blksize;
softc->quirks |= SA_QUIRK_VARIABLE;
break;
}
}
/*
* If no quirk has determined that this is a device that needs
* to have 2 Filemarks at EOD, now is the time to find out.
*/
if ((softc->quirks & SA_QUIRK_2FM) == 0) {
switch (softc->media_density) {
case SCSI_DENSITY_HALFINCH_800:
case SCSI_DENSITY_HALFINCH_1600:
case SCSI_DENSITY_HALFINCH_6250:
case SCSI_DENSITY_HALFINCH_6250C:
case SCSI_DENSITY_HALFINCH_PE:
softc->quirks &= ~SA_QUIRK_1FM;
softc->quirks |= SA_QUIRK_2FM;
break;
default:
break;
}
}
/*
* Now validate that some info we got makes sense.
*/
if ((softc->max_blk < softc->media_blksize) ||
(softc->min_blk > softc->media_blksize &&
softc->media_blksize)) {
xpt_print(periph->path,
"BLOCK LIMITS (%d..%d) could not match current "
"block settings (%d)- adjusting\n", softc->min_blk,
softc->max_blk, softc->media_blksize);
softc->max_blk = softc->min_blk =
softc->media_blksize;
}
/*
* Now put ourselves into the right frame of mind based
* upon quirks...
*/
tryagain:
/*
* If we want to be in FIXED mode and our current blocksize
* is not equal to our last blocksize (if nonzero), try and
* set ourselves to this last blocksize (as the 'preferred'
* block size). The initial quirkmatch at registry sets the
* initial 'last' blocksize. If, for whatever reason, this
* 'last' blocksize is zero, set the blocksize to 512,
* or min_blk if that's larger.
*/
if ((softc->quirks & SA_QUIRK_FIXED) &&
(softc->quirks & SA_QUIRK_NO_MODESEL) == 0 &&
(softc->media_blksize != softc->last_media_blksize)) {
softc->media_blksize = softc->last_media_blksize;
if (softc->media_blksize == 0) {
softc->media_blksize = 512;
if (softc->media_blksize < softc->min_blk) {
softc->media_blksize = softc->min_blk;
}
}
error = sasetparams(periph, SA_PARAM_BLOCKSIZE,
softc->media_blksize, 0, 0, SF_NO_PRINT);
if (error) {
xpt_print(periph->path,
"unable to set fixed blocksize to %d\n",
softc->media_blksize);
goto exit;
}
}
if ((softc->quirks & SA_QUIRK_VARIABLE) &&
(softc->media_blksize != 0)) {
softc->last_media_blksize = softc->media_blksize;
softc->media_blksize = 0;
error = sasetparams(periph, SA_PARAM_BLOCKSIZE,
0, 0, 0, SF_NO_PRINT);
if (error) {
/*
* If this fails and we were guessing, just
* assume that we got it wrong and go try
* fixed block mode. Don't even check against
* density code at this point.
*/
if (guessing) {
softc->quirks &= ~SA_QUIRK_VARIABLE;
softc->quirks |= SA_QUIRK_FIXED;
if (softc->last_media_blksize == 0)
softc->last_media_blksize = 512;
goto tryagain;
}
xpt_print(periph->path,
"unable to set variable blocksize\n");
goto exit;
}
}
/*
* Now that we have the current block size,
* set up some parameters for sastart's usage.
*/
if (softc->media_blksize) {
softc->flags |= SA_FLAG_FIXED;
if (powerof2(softc->media_blksize)) {
softc->blk_shift =
ffs(softc->media_blksize) - 1;
softc->blk_mask = softc->media_blksize - 1;
} else {
softc->blk_mask = ~0;
softc->blk_shift = 0;
}
} else {
/*
* The SCSI-3 spec allows 0 to mean "unspecified".
* The SCSI-1 spec allows 0 to mean 'infinite'.
*
* Either works here.
*/
if (softc->max_blk == 0) {
softc->max_blk = ~0;
}
softc->blk_shift = 0;
if (softc->blk_gran != 0) {
softc->blk_mask = softc->blk_gran - 1;
} else {
softc->blk_mask = 0;
}
}
if (write_protect)
softc->flags |= SA_FLAG_TAPE_WP;
if (comp_supported) {
if (softc->saved_comp_algorithm == 0)
softc->saved_comp_algorithm =
softc->comp_algorithm;
softc->flags |= SA_FLAG_COMP_SUPP;
if (comp_enabled)
softc->flags |= SA_FLAG_COMP_ENABLED;
} else
softc->flags |= SA_FLAG_COMP_UNSUPP;
if ((softc->buffer_mode == SMH_SA_BUF_MODE_NOBUF) &&
(softc->quirks & SA_QUIRK_NO_MODESEL) == 0) {
error = sasetparams(periph, SA_PARAM_BUFF_MODE, 0,
0, 0, SF_NO_PRINT);
if (error == 0) {
softc->buffer_mode = SMH_SA_BUF_MODE_SIBUF;
} else {
xpt_print(periph->path,
"unable to set buffered mode\n");
}
error = 0; /* not an error */
}
if (error == 0) {
softc->flags |= SA_FLAG_TAPE_MOUNTED;
}
exit:
if (rblim != NULL)
free(rblim, M_SCSISA);
if (error != 0) {
softc->dsreg = MTIO_DSREG_NIL;
} else {
softc->fileno = softc->blkno = 0;
softc->rep_fileno = softc->rep_blkno = -1;
softc->partition = 0;
softc->dsreg = MTIO_DSREG_REST;
}
#ifdef SA_1FM_AT_EOD
if ((softc->quirks & SA_QUIRK_2FM) == 0)
softc->quirks |= SA_QUIRK_1FM;
#else
if ((softc->quirks & SA_QUIRK_1FM) == 0)
softc->quirks |= SA_QUIRK_2FM;
#endif
} else
xpt_release_ccb(ccb);
/*
* If we return an error, we're not mounted any more,
* so release any device reservation.
*/
if (error != 0) {
(void) sareservereleaseunit(periph, FALSE);
} else {
/*
* Clear I/O residual.
*/
softc->last_io_resid = 0;
softc->last_ctl_resid = 0;
}
return (error);
}
/*
* How many filemarks do we need to write if we were to terminate the
* tape session right now? Note that this can be a negative number
*/
static int
samarkswanted(struct cam_periph *periph)
{
int markswanted;
struct sa_softc *softc;
softc = (struct sa_softc *)periph->softc;
markswanted = 0;
if ((softc->flags & SA_FLAG_TAPE_WRITTEN) != 0) {
markswanted++;
if (softc->quirks & SA_QUIRK_2FM)
markswanted++;
}
markswanted -= softc->filemarks;
return (markswanted);
}
static int
sacheckeod(struct cam_periph *periph)
{
int error;
int markswanted;
markswanted = samarkswanted(periph);
if (markswanted > 0) {
error = sawritefilemarks(periph, markswanted, FALSE, FALSE);
} else {
error = 0;
}
return (error);
}
static int
saerror(union ccb *ccb, u_int32_t cflgs, u_int32_t sflgs)
{
static const char *toobig =
"%d-byte tape record bigger than supplied buffer\n";
struct cam_periph *periph;
struct sa_softc *softc;
struct ccb_scsiio *csio;
struct scsi_sense_data *sense;
uint64_t resid = 0;
int64_t info = 0;
cam_status status;
int error_code, sense_key, asc, ascq, error, aqvalid, stream_valid;
int sense_len;
uint8_t stream_bits;
periph = xpt_path_periph(ccb->ccb_h.path);
softc = (struct sa_softc *)periph->softc;
csio = &ccb->csio;
sense = &csio->sense_data;
sense_len = csio->sense_len - csio->sense_resid;
scsi_extract_sense_len(sense, sense_len, &error_code, &sense_key,
&asc, &ascq, /*show_errors*/ 1);
if (asc != -1 && ascq != -1)
aqvalid = 1;
else
aqvalid = 0;
if (scsi_get_stream_info(sense, sense_len, NULL, &stream_bits) == 0)
stream_valid = 1;
else
stream_valid = 0;
error = 0;
status = csio->ccb_h.status & CAM_STATUS_MASK;
/*
* Calculate/latch up, any residuals... We do this in a funny 2-step
* so we can print stuff here if we have CAM_DEBUG enabled for this
* unit.
*/
if (status == CAM_SCSI_STATUS_ERROR) {
if (scsi_get_sense_info(sense, sense_len, SSD_DESC_INFO, &resid,
&info) == 0) {
if ((softc->flags & SA_FLAG_FIXED) != 0)
resid *= softc->media_blksize;
} else {
resid = csio->dxfer_len;
info = resid;
if ((softc->flags & SA_FLAG_FIXED) != 0) {
if (softc->media_blksize)
info /= softc->media_blksize;
}
}
if (csio->cdb_io.cdb_bytes[0] == SA_READ ||
csio->cdb_io.cdb_bytes[0] == SA_WRITE) {
bcopy((caddr_t) sense, (caddr_t) &softc->last_io_sense,
sizeof (struct scsi_sense_data));
bcopy(csio->cdb_io.cdb_bytes, softc->last_io_cdb,
(int) csio->cdb_len);
softc->last_io_resid = resid;
softc->last_resid_was_io = 1;
} else {
bcopy((caddr_t) sense, (caddr_t) &softc->last_ctl_sense,
sizeof (struct scsi_sense_data));
bcopy(csio->cdb_io.cdb_bytes, softc->last_ctl_cdb,
(int) csio->cdb_len);
softc->last_ctl_resid = resid;
softc->last_resid_was_io = 0;
}
CAM_DEBUG(periph->path, CAM_DEBUG_INFO, ("CDB[0]=0x%x Key 0x%x "
"ASC/ASCQ 0x%x/0x%x CAM STATUS 0x%x flags 0x%x resid %jd "
"dxfer_len %d\n", csio->cdb_io.cdb_bytes[0] & 0xff,
sense_key, asc, ascq, status,
(stream_valid) ? stream_bits : 0, (intmax_t)resid,
csio->dxfer_len));
} else {
CAM_DEBUG(periph->path, CAM_DEBUG_INFO,
("Cam Status 0x%x\n", status));
}
switch (status) {
case CAM_REQ_CMP:
return (0);
case CAM_SCSI_STATUS_ERROR:
/*
* If a read/write command, we handle it here.
*/
if (csio->cdb_io.cdb_bytes[0] == SA_READ ||
csio->cdb_io.cdb_bytes[0] == SA_WRITE) {
break;
}
/*
* If this was just EOM/EOP, Filemark, Setmark or ILI detected
* on a non read/write command, we assume it's not an error
* and propagate the residule and return.
*/
if ((aqvalid && asc == 0 && ascq > 0 && ascq <= 5) ||
(aqvalid == 0 && sense_key == SSD_KEY_NO_SENSE)) {
csio->resid = resid;
QFRLS(ccb);
return (0);
}
/*
* Otherwise, we let the common code handle this.
*/
return (cam_periph_error(ccb, cflgs, sflgs, &softc->saved_ccb));
/*
* XXX: To Be Fixed
* We cannot depend upon CAM honoring retry counts for these.
*/
case CAM_SCSI_BUS_RESET:
case CAM_BDR_SENT:
if (ccb->ccb_h.retry_count <= 0) {
return (EIO);
}
/* FALLTHROUGH */
default:
return (cam_periph_error(ccb, cflgs, sflgs, &softc->saved_ccb));
}
/*
* Handle filemark, end of tape, mismatched record sizes....
* From this point out, we're only handling read/write cases.
* Handle writes && reads differently.
*/
if (csio->cdb_io.cdb_bytes[0] == SA_WRITE) {
if (sense_key == SSD_KEY_VOLUME_OVERFLOW) {
csio->resid = resid;
error = ENOSPC;
} else if ((stream_valid != 0) && (stream_bits & SSD_EOM)) {
softc->flags |= SA_FLAG_EOM_PENDING;
/*
* Grotesque as it seems, the few times
* I've actually seen a non-zero resid,
* the tape drive actually lied and had
* written all the data!.
*/
csio->resid = 0;
}
} else {
csio->resid = resid;
if (sense_key == SSD_KEY_BLANK_CHECK) {
if (softc->quirks & SA_QUIRK_1FM) {
error = 0;
softc->flags |= SA_FLAG_EOM_PENDING;
} else {
error = EIO;
}
} else if ((stream_valid != 0) && (stream_bits & SSD_FILEMARK)){
if (softc->flags & SA_FLAG_FIXED) {
error = -1;
softc->flags |= SA_FLAG_EOF_PENDING;
}
/*
* Unconditionally, if we detected a filemark on a read,
* mark that we've run moved a file ahead.
*/
if (softc->fileno != (daddr_t) -1) {
softc->fileno++;
softc->blkno = 0;
csio->ccb_h.ccb_pflags |= SA_POSITION_UPDATED;
}
}
}
/*
* Incorrect Length usually applies to read, but can apply to writes.
*/
if (error == 0 && (stream_valid != 0) && (stream_bits & SSD_ILI)) {
if (info < 0) {
xpt_print(csio->ccb_h.path, toobig,
csio->dxfer_len - info);
csio->resid = csio->dxfer_len;
error = EIO;
} else {
csio->resid = resid;
if (softc->flags & SA_FLAG_FIXED) {
softc->flags |= SA_FLAG_EIO_PENDING;
}
/*
* Bump the block number if we hadn't seen a filemark.
* Do this independent of errors (we've moved anyway).
*/
if ((stream_valid == 0) ||
(stream_bits & SSD_FILEMARK) == 0) {
if (softc->blkno != (daddr_t) -1) {
softc->blkno++;
csio->ccb_h.ccb_pflags |=
SA_POSITION_UPDATED;
}
}
}
}
if (error <= 0) {
/*
* Unfreeze the queue if frozen as we're not returning anything
* to our waiters that would indicate an I/O error has occurred
* (yet).
*/
QFRLS(ccb);
error = 0;
}
return (error);
}
static int
sagetparams(struct cam_periph *periph, sa_params params_to_get,
u_int32_t *blocksize, u_int8_t *density, u_int32_t *numblocks,
int *buff_mode, u_int8_t *write_protect, u_int8_t *speed,
int *comp_supported, int *comp_enabled, u_int32_t *comp_algorithm,
sa_comp_t *tcs, struct scsi_control_data_prot_subpage *prot_page,
int dp_size, int prot_changeable)
{
union ccb *ccb;
void *mode_buffer;
struct scsi_mode_header_6 *mode_hdr;
struct scsi_mode_blk_desc *mode_blk;
int mode_buffer_len;
struct sa_softc *softc;
u_int8_t cpage;
int error;
cam_status status;
softc = (struct sa_softc *)periph->softc;
ccb = cam_periph_getccb(periph, 1);
if (softc->quirks & SA_QUIRK_NO_CPAGE)
cpage = SA_DEVICE_CONFIGURATION_PAGE;
else
cpage = SA_DATA_COMPRESSION_PAGE;
retry:
mode_buffer_len = sizeof(*mode_hdr) + sizeof(*mode_blk);
if (params_to_get & SA_PARAM_COMPRESSION) {
if (softc->quirks & SA_QUIRK_NOCOMP) {
*comp_supported = FALSE;
params_to_get &= ~SA_PARAM_COMPRESSION;
} else
mode_buffer_len += sizeof (sa_comp_t);
}
/* XXX Fix M_NOWAIT */
mode_buffer = malloc(mode_buffer_len, M_SCSISA, M_NOWAIT | M_ZERO);
if (mode_buffer == NULL) {
xpt_release_ccb(ccb);
return (ENOMEM);
}
mode_hdr = (struct scsi_mode_header_6 *)mode_buffer;
mode_blk = (struct scsi_mode_blk_desc *)&mode_hdr[1];
/* it is safe to retry this */
scsi_mode_sense(&ccb->csio, 5, sadone, MSG_SIMPLE_Q_TAG, FALSE,
SMS_PAGE_CTRL_CURRENT, (params_to_get & SA_PARAM_COMPRESSION) ?
cpage : SMS_VENDOR_SPECIFIC_PAGE, mode_buffer, mode_buffer_len,
SSD_FULL_SIZE, SCSIOP_TIMEOUT);
error = cam_periph_runccb(ccb, saerror, 0, SF_NO_PRINT,
softc->device_stats);
status = ccb->ccb_h.status & CAM_STATUS_MASK;
if (error == EINVAL && (params_to_get & SA_PARAM_COMPRESSION) != 0) {
/*
* Hmm. Let's see if we can try another page...
* If we've already done that, give up on compression
* for this device and remember this for the future
* and attempt the request without asking for compression
* info.
*/
if (cpage == SA_DATA_COMPRESSION_PAGE) {
cpage = SA_DEVICE_CONFIGURATION_PAGE;
goto retry;
}
softc->quirks |= SA_QUIRK_NOCOMP;
free(mode_buffer, M_SCSISA);
goto retry;
} else if (status == CAM_SCSI_STATUS_ERROR) {
/* Tell the user about the fatal error. */
scsi_sense_print(&ccb->csio);
goto sagetparamsexit;
}
/*
* If the user only wants the compression information, and
* the device doesn't send back the block descriptor, it's
* no big deal. If the user wants more than just
* compression, though, and the device doesn't pass back the
* block descriptor, we need to send another mode sense to
* get the block descriptor.
*/
if ((mode_hdr->blk_desc_len == 0) &&
(params_to_get & SA_PARAM_COMPRESSION) &&
(params_to_get & ~(SA_PARAM_COMPRESSION))) {
/*
* Decrease the mode buffer length by the size of
* the compression page, to make sure the data
* there doesn't get overwritten.
*/
mode_buffer_len -= sizeof (sa_comp_t);
/*
* Now move the compression page that we presumably
* got back down the memory chunk a little bit so
* it doesn't get spammed.
*/
bcopy(&mode_hdr[0], &mode_hdr[1], sizeof (sa_comp_t));
bzero(&mode_hdr[0], sizeof (mode_hdr[0]));
/*
* Now, we issue another mode sense and just ask
* for the block descriptor, etc.
*/
scsi_mode_sense(&ccb->csio, 2, sadone, MSG_SIMPLE_Q_TAG, FALSE,
SMS_PAGE_CTRL_CURRENT, SMS_VENDOR_SPECIFIC_PAGE,
mode_buffer, mode_buffer_len, SSD_FULL_SIZE,
SCSIOP_TIMEOUT);
error = cam_periph_runccb(ccb, saerror, 0, SF_NO_PRINT,
softc->device_stats);
if (error != 0)
goto sagetparamsexit;
}
if (params_to_get & SA_PARAM_BLOCKSIZE)
*blocksize = scsi_3btoul(mode_blk->blklen);
if (params_to_get & SA_PARAM_NUMBLOCKS)
*numblocks = scsi_3btoul(mode_blk->nblocks);
if (params_to_get & SA_PARAM_BUFF_MODE)
*buff_mode = mode_hdr->dev_spec & SMH_SA_BUF_MODE_MASK;
if (params_to_get & SA_PARAM_DENSITY)
*density = mode_blk->density;
if (params_to_get & SA_PARAM_WP)
*write_protect = (mode_hdr->dev_spec & SMH_SA_WP)? TRUE : FALSE;
if (params_to_get & SA_PARAM_SPEED)
*speed = mode_hdr->dev_spec & SMH_SA_SPEED_MASK;
if (params_to_get & SA_PARAM_COMPRESSION) {
sa_comp_t *ntcs = (sa_comp_t *) &mode_blk[1];
if (cpage == SA_DATA_COMPRESSION_PAGE) {
struct scsi_data_compression_page *cp = &ntcs->dcomp;
*comp_supported =
(cp->dce_and_dcc & SA_DCP_DCC)? TRUE : FALSE;
*comp_enabled =
(cp->dce_and_dcc & SA_DCP_DCE)? TRUE : FALSE;
*comp_algorithm = scsi_4btoul(cp->comp_algorithm);
} else {
struct scsi_dev_conf_page *cp = &ntcs->dconf;
/*
* We don't really know whether this device supports
* Data Compression if the algorithm field is
* zero. Just say we do.
*/
*comp_supported = TRUE;
*comp_enabled =
(cp->sel_comp_alg != SA_COMP_NONE)? TRUE : FALSE;
*comp_algorithm = cp->sel_comp_alg;
}
if (tcs != NULL)
bcopy(ntcs, tcs, sizeof (sa_comp_t));
}
if ((params_to_get & SA_PARAM_DENSITY_EXT)
&& (softc->scsi_rev >= SCSI_REV_SPC)) {
int i;
for (i = 0; i < SA_DENSITY_TYPES; i++) {
scsi_report_density_support(&ccb->csio,
/*retries*/ 1,
/*cbfcnp*/ sadone,
/*tag_action*/ MSG_SIMPLE_Q_TAG,
/*media*/ softc->density_type_bits[i] & SRDS_MEDIA,
/*medium_type*/ softc->density_type_bits[i] &
SRDS_MEDIUM_TYPE,
/*data_ptr*/ softc->density_info[i],
/*length*/ sizeof(softc->density_info[i]),
/*sense_len*/ SSD_FULL_SIZE,
/*timeout*/ REP_DENSITY_TIMEOUT);
error = cam_periph_runccb(ccb, saerror, 0, SF_NO_PRINT,
softc->device_stats);
status = ccb->ccb_h.status & CAM_STATUS_MASK;
/*
* Some tape drives won't support this command at
* all, but hopefully we'll minimize that with the
* check for SPC or greater support above. If they
* don't support the default report (neither the
* MEDIA or MEDIUM_TYPE bits set), then there is
* really no point in continuing on to look for
* other reports.
*/
if ((error != 0)
|| (status != CAM_REQ_CMP)) {
error = 0;
softc->density_info_valid[i] = 0;
if (softc->density_type_bits[i] == 0)
break;
else
continue;
}
softc->density_info_valid[i] = ccb->csio.dxfer_len -
ccb->csio.resid;
}
}
/*
* Get logical block protection parameters if the drive supports it.
*/
if ((params_to_get & SA_PARAM_LBP)
&& (softc->flags & SA_FLAG_PROTECT_SUPP)) {
struct scsi_mode_header_10 *mode10_hdr;
struct scsi_control_data_prot_subpage *dp_page;
struct scsi_mode_sense_10 *cdb;
struct sa_prot_state *prot;
int dp_len, returned_len;
if (dp_size == 0)
dp_size = sizeof(*dp_page);
dp_len = sizeof(*mode10_hdr) + dp_size;
mode10_hdr = malloc(dp_len, M_SCSISA, M_NOWAIT | M_ZERO);
if (mode10_hdr == NULL) {
error = ENOMEM;
goto sagetparamsexit;
}
scsi_mode_sense_len(&ccb->csio,
/*retries*/ 5,
/*cbfcnp*/ sadone,
/*tag_action*/ MSG_SIMPLE_Q_TAG,
/*dbd*/ TRUE,
/*page_code*/ (prot_changeable == 0) ?
SMS_PAGE_CTRL_CURRENT :
SMS_PAGE_CTRL_CHANGEABLE,
/*page*/ SMS_CONTROL_MODE_PAGE,
/*param_buf*/ (uint8_t *)mode10_hdr,
/*param_len*/ dp_len,
/*minimum_cmd_size*/ 10,
/*sense_len*/ SSD_FULL_SIZE,
/*timeout*/ SCSIOP_TIMEOUT);
/*
* XXX KDM we need to be able to set the subpage in the
* fill function.
*/
cdb = (struct scsi_mode_sense_10 *)ccb->csio.cdb_io.cdb_bytes;
cdb->subpage = SA_CTRL_DP_SUBPAGE_CODE;
error = cam_periph_runccb(ccb, saerror, 0, SF_NO_PRINT,
softc->device_stats);
if (error != 0) {
free(mode10_hdr, M_SCSISA);
goto sagetparamsexit;
}
status = ccb->ccb_h.status & CAM_STATUS_MASK;
if (status != CAM_REQ_CMP) {
error = EINVAL;
free(mode10_hdr, M_SCSISA);
goto sagetparamsexit;
}
/*
* The returned data length at least has to be long enough
* for us to look at length in the mode page header.
*/
returned_len = ccb->csio.dxfer_len - ccb->csio.resid;
if (returned_len < sizeof(mode10_hdr->data_length)) {
error = EINVAL;
free(mode10_hdr, M_SCSISA);
goto sagetparamsexit;
}
returned_len = min(returned_len,
sizeof(mode10_hdr->data_length) +
scsi_2btoul(mode10_hdr->data_length));
dp_page = (struct scsi_control_data_prot_subpage *)
&mode10_hdr[1];
/*
* We also have to have enough data to include the prot_bits
* in the subpage.
*/
if (returned_len < (sizeof(*mode10_hdr) +
__offsetof(struct scsi_control_data_prot_subpage, prot_bits)
+ sizeof(dp_page->prot_bits))) {
error = EINVAL;
free(mode10_hdr, M_SCSISA);
goto sagetparamsexit;
}
prot = &softc->prot_info.cur_prot_state;
prot->prot_method = dp_page->prot_method;
prot->pi_length = dp_page->pi_length &
SA_CTRL_DP_PI_LENGTH_MASK;
prot->lbp_w = (dp_page->prot_bits & SA_CTRL_DP_LBP_W) ? 1 :0;
prot->lbp_r = (dp_page->prot_bits & SA_CTRL_DP_LBP_R) ? 1 :0;
prot->rbdp = (dp_page->prot_bits & SA_CTRL_DP_RBDP) ? 1 :0;
prot->initialized = 1;
if (prot_page != NULL)
bcopy(dp_page, prot_page, min(sizeof(*prot_page),
sizeof(*dp_page)));
free(mode10_hdr, M_SCSISA);
}
if (CAM_DEBUGGED(periph->path, CAM_DEBUG_INFO)) {
int idx;
char *xyz = mode_buffer;
xpt_print_path(periph->path);
printf("Mode Sense Data=");
for (idx = 0; idx < mode_buffer_len; idx++)
printf(" 0x%02x", xyz[idx] & 0xff);
printf("\n");
}
sagetparamsexit:
xpt_release_ccb(ccb);
free(mode_buffer, M_SCSISA);
return (error);
}
/*
* Set protection information to the pending protection information stored
* in the softc.
*/
static int
sasetprot(struct cam_periph *periph, struct sa_prot_state *new_prot)
{
struct sa_softc *softc;
struct scsi_control_data_prot_subpage *dp_page, *dp_changeable;
struct scsi_mode_header_10 *mode10_hdr, *mode10_changeable;
union ccb *ccb;
uint8_t current_speed;
size_t dp_size, dp_page_length;
int dp_len, buff_mode;
int error;
softc = (struct sa_softc *)periph->softc;
mode10_hdr = NULL;
mode10_changeable = NULL;
ccb = NULL;
/*
* Start off with the size set to the actual length of the page
* that we have defined.
*/
dp_size = sizeof(*dp_changeable);
dp_page_length = dp_size -
__offsetof(struct scsi_control_data_prot_subpage, prot_method);
retry_length:
dp_len = sizeof(*mode10_changeable) + dp_size;
mode10_changeable = malloc(dp_len, M_SCSISA, M_NOWAIT | M_ZERO);
if (mode10_changeable == NULL) {
error = ENOMEM;
goto bailout;
}
dp_changeable =
(struct scsi_control_data_prot_subpage *)&mode10_changeable[1];
/*
* First get the data protection page changeable parameters mask.
* We need to know which parameters the drive supports changing.
* We also need to know what the drive claims that its page length
* is. The reason is that IBM drives in particular are very picky
* about the page length. They want it (the length set in the
* page structure itself) to be 28 bytes, and they want the
* parameter list length specified in the mode select header to be
* 40 bytes. So, to work with IBM drives as well as any other tape
* drive, find out what the drive claims the page length is, and
* make sure that we match that.
*/
error = sagetparams(periph, SA_PARAM_SPEED | SA_PARAM_LBP,
NULL, NULL, NULL, &buff_mode, NULL, &current_speed, NULL, NULL,
NULL, NULL, dp_changeable, dp_size, /*prot_changeable*/ 1);
if (error != 0)
goto bailout;
if (scsi_2btoul(dp_changeable->length) > dp_page_length) {
dp_page_length = scsi_2btoul(dp_changeable->length);
dp_size = dp_page_length +
__offsetof(struct scsi_control_data_prot_subpage,
prot_method);
free(mode10_changeable, M_SCSISA);
mode10_changeable = NULL;
goto retry_length;
}
mode10_hdr = malloc(dp_len, M_SCSISA, M_NOWAIT | M_ZERO);
if (mode10_hdr == NULL) {
error = ENOMEM;
goto bailout;
}
dp_page = (struct scsi_control_data_prot_subpage *)&mode10_hdr[1];
/*
* Now grab the actual current settings in the page.
*/
error = sagetparams(periph, SA_PARAM_SPEED | SA_PARAM_LBP,
NULL, NULL, NULL, &buff_mode, NULL, &current_speed, NULL, NULL,
NULL, NULL, dp_page, dp_size, /*prot_changeable*/ 0);
if (error != 0)
goto bailout;
/* These two fields need to be 0 for MODE SELECT */
scsi_ulto2b(0, mode10_hdr->data_length);
mode10_hdr->medium_type = 0;
/* We are not including a block descriptor */
scsi_ulto2b(0, mode10_hdr->blk_desc_len);
mode10_hdr->dev_spec = current_speed;
/* if set, set single-initiator buffering mode */
if (softc->buffer_mode == SMH_SA_BUF_MODE_SIBUF) {
mode10_hdr->dev_spec |= SMH_SA_BUF_MODE_SIBUF;
}
/*
* For each field, make sure that the drive allows changing it
* before bringing in the user's setting.
*/
if (dp_changeable->prot_method != 0)
dp_page->prot_method = new_prot->prot_method;
if (dp_changeable->pi_length & SA_CTRL_DP_PI_LENGTH_MASK) {
dp_page->pi_length &= ~SA_CTRL_DP_PI_LENGTH_MASK;
dp_page->pi_length |= (new_prot->pi_length &
SA_CTRL_DP_PI_LENGTH_MASK);
}
if (dp_changeable->prot_bits & SA_CTRL_DP_LBP_W) {
if (new_prot->lbp_w)
dp_page->prot_bits |= SA_CTRL_DP_LBP_W;
else
dp_page->prot_bits &= ~SA_CTRL_DP_LBP_W;
}
if (dp_changeable->prot_bits & SA_CTRL_DP_LBP_R) {
if (new_prot->lbp_r)
dp_page->prot_bits |= SA_CTRL_DP_LBP_R;
else
dp_page->prot_bits &= ~SA_CTRL_DP_LBP_R;
}
if (dp_changeable->prot_bits & SA_CTRL_DP_RBDP) {
if (new_prot->rbdp)
dp_page->prot_bits |= SA_CTRL_DP_RBDP;
else
dp_page->prot_bits &= ~SA_CTRL_DP_RBDP;
}
ccb = cam_periph_getccb(periph, 1);
scsi_mode_select_len(&ccb->csio,
/*retries*/ 5,
/*cbfcnp*/ sadone,
/*tag_action*/ MSG_SIMPLE_Q_TAG,
/*scsi_page_fmt*/ TRUE,
/*save_pages*/ FALSE,
/*param_buf*/ (uint8_t *)mode10_hdr,
/*param_len*/ dp_len,
/*minimum_cmd_size*/ 10,
/*sense_len*/ SSD_FULL_SIZE,
/*timeout*/ SCSIOP_TIMEOUT);
error = cam_periph_runccb(ccb, saerror, 0, 0, softc->device_stats);
if (error != 0)
goto bailout;
if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
error = EINVAL;
goto bailout;
}
/*
* The operation was successful. We could just copy the settings
* the user requested, but just in case the drive ignored some of
* our settings, let's ask for status again.
*/
error = sagetparams(periph, SA_PARAM_SPEED | SA_PARAM_LBP,
NULL, NULL, NULL, &buff_mode, NULL, &current_speed, NULL, NULL,
NULL, NULL, dp_page, dp_size, 0);
bailout:
if (ccb != NULL)
xpt_release_ccb(ccb);
free(mode10_hdr, M_SCSISA);
free(mode10_changeable, M_SCSISA);
return (error);
}
/*
* The purpose of this function is to set one of four different parameters
* for a tape drive:
* - blocksize
* - density
* - compression / compression algorithm
* - buffering mode
*
* The assumption is that this will be called from saioctl(), and therefore
* from a process context. Thus the waiting malloc calls below. If that
* assumption ever changes, the malloc calls should be changed to be
* NOWAIT mallocs.
*
* Any or all of the four parameters may be set when this function is
* called. It should handle setting more than one parameter at once.
*/
static int
sasetparams(struct cam_periph *periph, sa_params params_to_set,
u_int32_t blocksize, u_int8_t density, u_int32_t calg,
u_int32_t sense_flags)
{
struct sa_softc *softc;
u_int32_t current_blocksize;
u_int32_t current_calg;
u_int8_t current_density;
u_int8_t current_speed;
int comp_enabled, comp_supported;
void *mode_buffer;
int mode_buffer_len;
struct scsi_mode_header_6 *mode_hdr;
struct scsi_mode_blk_desc *mode_blk;
sa_comp_t *ccomp, *cpage;
int buff_mode;
union ccb *ccb = NULL;
int error;
softc = (struct sa_softc *)periph->softc;
ccomp = malloc(sizeof (sa_comp_t), M_SCSISA, M_NOWAIT);
if (ccomp == NULL)
return (ENOMEM);
/*
* Since it doesn't make sense to set the number of blocks, or
* write protection, we won't try to get the current value. We
* always want to get the blocksize, so we can set it back to the
* proper value.
*/
error = sagetparams(periph,
params_to_set | SA_PARAM_BLOCKSIZE | SA_PARAM_SPEED,
&current_blocksize, &current_density, NULL, &buff_mode, NULL,
&current_speed, &comp_supported, &comp_enabled,
&current_calg, ccomp, NULL, 0, 0);
if (error != 0) {
free(ccomp, M_SCSISA);
return (error);
}
mode_buffer_len = sizeof(*mode_hdr) + sizeof(*mode_blk);
if (params_to_set & SA_PARAM_COMPRESSION)
mode_buffer_len += sizeof (sa_comp_t);
mode_buffer = malloc(mode_buffer_len, M_SCSISA, M_NOWAIT | M_ZERO);
if (mode_buffer == NULL) {
free(ccomp, M_SCSISA);
return (ENOMEM);
}
mode_hdr = (struct scsi_mode_header_6 *)mode_buffer;
mode_blk = (struct scsi_mode_blk_desc *)&mode_hdr[1];
ccb = cam_periph_getccb(periph, 1);
retry:
if (params_to_set & SA_PARAM_COMPRESSION) {
if (mode_blk) {
cpage = (sa_comp_t *)&mode_blk[1];
} else {
cpage = (sa_comp_t *)&mode_hdr[1];
}
bcopy(ccomp, cpage, sizeof (sa_comp_t));
cpage->hdr.pagecode &= ~0x80;
} else
cpage = NULL;
/*
* If the caller wants us to set the blocksize, use the one they
* pass in. Otherwise, use the blocksize we got back from the
* mode select above.
*/
if (mode_blk) {
if (params_to_set & SA_PARAM_BLOCKSIZE)
scsi_ulto3b(blocksize, mode_blk->blklen);
else
scsi_ulto3b(current_blocksize, mode_blk->blklen);
/*
* Set density if requested, else preserve old density.
* SCSI_SAME_DENSITY only applies to SCSI-2 or better
* devices, else density we've latched up in our softc.
*/
if (params_to_set & SA_PARAM_DENSITY) {
mode_blk->density = density;
} else if (softc->scsi_rev > SCSI_REV_CCS) {
mode_blk->density = SCSI_SAME_DENSITY;
} else {
mode_blk->density = softc->media_density;
}
}
/*
* For mode selects, these two fields must be zero.
*/
mode_hdr->data_length = 0;
mode_hdr->medium_type = 0;
/* set the speed to the current value */
mode_hdr->dev_spec = current_speed;
/* if set, set single-initiator buffering mode */
if (softc->buffer_mode == SMH_SA_BUF_MODE_SIBUF) {
mode_hdr->dev_spec |= SMH_SA_BUF_MODE_SIBUF;
}
if (mode_blk)
mode_hdr->blk_desc_len = sizeof(struct scsi_mode_blk_desc);
else
mode_hdr->blk_desc_len = 0;
/*
* First, if the user wants us to set the compression algorithm or
* just turn compression on, check to make sure that this drive
* supports compression.
*/
if (params_to_set & SA_PARAM_COMPRESSION) {
/*
* If the compression algorithm is 0, disable compression.
* If the compression algorithm is non-zero, enable
* compression and set the compression type to the
* specified compression algorithm, unless the algorithm is
* MT_COMP_ENABLE. In that case, we look at the
* compression algorithm that is currently set and if it is
* non-zero, we leave it as-is. If it is zero, and we have
* saved a compression algorithm from a time when
* compression was enabled before, set the compression to
* the saved value.
*/
switch (ccomp->hdr.pagecode & ~0x80) {
case SA_DEVICE_CONFIGURATION_PAGE:
{
struct scsi_dev_conf_page *dcp = &cpage->dconf;
if (calg == 0) {
dcp->sel_comp_alg = SA_COMP_NONE;
break;
}
if (calg != MT_COMP_ENABLE) {
dcp->sel_comp_alg = calg;
} else if (dcp->sel_comp_alg == SA_COMP_NONE &&
softc->saved_comp_algorithm != 0) {
dcp->sel_comp_alg = softc->saved_comp_algorithm;
}
break;
}
case SA_DATA_COMPRESSION_PAGE:
if (ccomp->dcomp.dce_and_dcc & SA_DCP_DCC) {
struct scsi_data_compression_page *dcp = &cpage->dcomp;
if (calg == 0) {
/*
* Disable compression, but leave the
* decompression and the capability bit
* alone.
*/
dcp->dce_and_dcc = SA_DCP_DCC;
dcp->dde_and_red |= SA_DCP_DDE;
break;
}
/* enable compression && decompression */
dcp->dce_and_dcc = SA_DCP_DCE | SA_DCP_DCC;
dcp->dde_and_red |= SA_DCP_DDE;
/*
* If there, use compression algorithm from caller.
* Otherwise, if there's a saved compression algorithm
* and there is no current algorithm, use the saved
* algorithm. Else parrot back what we got and hope
* for the best.
*/
if (calg != MT_COMP_ENABLE) {
scsi_ulto4b(calg, dcp->comp_algorithm);
scsi_ulto4b(calg, dcp->decomp_algorithm);
} else if (scsi_4btoul(dcp->comp_algorithm) == 0 &&
softc->saved_comp_algorithm != 0) {
scsi_ulto4b(softc->saved_comp_algorithm,
dcp->comp_algorithm);
scsi_ulto4b(softc->saved_comp_algorithm,
dcp->decomp_algorithm);
}
break;
}
/*
* Compression does not appear to be supported-
* at least via the DATA COMPRESSION page. It
* would be too much to ask us to believe that
* the page itself is supported, but incorrectly
* reports an ability to manipulate data compression,
* so we'll assume that this device doesn't support
* compression. We can just fall through for that.
*/
/* FALLTHROUGH */
default:
/*
* The drive doesn't seem to support compression,
* so turn off the set compression bit.
*/
params_to_set &= ~SA_PARAM_COMPRESSION;
xpt_print(periph->path,
"device does not seem to support compression\n");
/*
* If that was the only thing the user wanted us to set,
* clean up allocated resources and return with
* 'operation not supported'.
*/
if (params_to_set == SA_PARAM_NONE) {
free(mode_buffer, M_SCSISA);
xpt_release_ccb(ccb);
return (ENODEV);
}
/*
* That wasn't the only thing the user wanted us to set.
* So, decrease the stated mode buffer length by the
* size of the compression mode page.
*/
mode_buffer_len -= sizeof(sa_comp_t);
}
}
/* It is safe to retry this operation */
scsi_mode_select(&ccb->csio, 5, sadone, MSG_SIMPLE_Q_TAG,
(params_to_set & SA_PARAM_COMPRESSION)? TRUE : FALSE,
FALSE, mode_buffer, mode_buffer_len, SSD_FULL_SIZE, SCSIOP_TIMEOUT);
error = cam_periph_runccb(ccb, saerror, 0,
sense_flags, softc->device_stats);
if (CAM_DEBUGGED(periph->path, CAM_DEBUG_INFO)) {
int idx;
char *xyz = mode_buffer;
xpt_print_path(periph->path);
printf("Err%d, Mode Select Data=", error);
for (idx = 0; idx < mode_buffer_len; idx++)
printf(" 0x%02x", xyz[idx] & 0xff);
printf("\n");
}
if (error) {
/*
* If we can, try without setting density/blocksize.
*/
if (mode_blk) {
if ((params_to_set &
(SA_PARAM_DENSITY|SA_PARAM_BLOCKSIZE)) == 0) {
mode_blk = NULL;
goto retry;
}
} else {
mode_blk = (struct scsi_mode_blk_desc *)&mode_hdr[1];
cpage = (sa_comp_t *)&mode_blk[1];
}
/*
* If we were setting the blocksize, and that failed, we
* want to set it to its original value. If we weren't
* setting the blocksize, we don't want to change it.
*/
scsi_ulto3b(current_blocksize, mode_blk->blklen);
/*
* Set density if requested, else preserve old density.
* SCSI_SAME_DENSITY only applies to SCSI-2 or better
* devices, else density we've latched up in our softc.
*/
if (params_to_set & SA_PARAM_DENSITY) {
mode_blk->density = current_density;
} else if (softc->scsi_rev > SCSI_REV_CCS) {
mode_blk->density = SCSI_SAME_DENSITY;
} else {
mode_blk->density = softc->media_density;
}
if (params_to_set & SA_PARAM_COMPRESSION)
bcopy(ccomp, cpage, sizeof (sa_comp_t));
/*
* The retry count is the only CCB field that might have been
* changed that we care about, so reset it back to 1.
*/
ccb->ccb_h.retry_count = 1;
cam_periph_runccb(ccb, saerror, 0, sense_flags,
softc->device_stats);
}
xpt_release_ccb(ccb);
if (ccomp != NULL)
free(ccomp, M_SCSISA);
if (params_to_set & SA_PARAM_COMPRESSION) {
if (error) {
softc->flags &= ~SA_FLAG_COMP_ENABLED;
/*
* Even if we get an error setting compression,
* do not say that we don't support it. We could
* have been wrong, or it may be media specific.
* softc->flags &= ~SA_FLAG_COMP_SUPP;
*/
softc->saved_comp_algorithm = softc->comp_algorithm;
softc->comp_algorithm = 0;
} else {
softc->flags |= SA_FLAG_COMP_ENABLED;
softc->comp_algorithm = calg;
}
}
free(mode_buffer, M_SCSISA);
return (error);
}
static int
saextget(struct cdev *dev, struct cam_periph *periph, struct sbuf *sb,
struct mtextget *g)
{
int indent, error;
char tmpstr[80];
struct sa_softc *softc;
int tmpint;
uint32_t maxio_tmp;
struct ccb_getdev cgd;
softc = (struct sa_softc *)periph->softc;
error = 0;
error = sagetparams_common(dev, periph);
if (error)
goto extget_bailout;
if (!SA_IS_CTRL(dev) && !softc->open_pending_mount)
sagetpos(periph);
indent = 0;
SASBADDNODE(sb, indent, mtextget);
/*
* Basic CAM peripheral information.
*/
SASBADDVARSTR(sb, indent, periph->periph_name, %s, periph_name,
strlen(periph->periph_name) + 1);
SASBADDUINT(sb, indent, periph->unit_number, %u, unit_number);
xpt_setup_ccb(&cgd.ccb_h,
periph->path,
CAM_PRIORITY_NORMAL);
cgd.ccb_h.func_code = XPT_GDEV_TYPE;
xpt_action((union ccb *)&cgd);
if ((cgd.ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
g->status = MT_EXT_GET_ERROR;
snprintf(g->error_str, sizeof(g->error_str),
"Error %#x returned for XPT_GDEV_TYPE CCB",
cgd.ccb_h.status);
goto extget_bailout;
}
cam_strvis(tmpstr, cgd.inq_data.vendor,
sizeof(cgd.inq_data.vendor), sizeof(tmpstr));
SASBADDVARSTRDESC(sb, indent, tmpstr, %s, vendor,
sizeof(cgd.inq_data.vendor) + 1, "SCSI Vendor ID");
cam_strvis(tmpstr, cgd.inq_data.product,
sizeof(cgd.inq_data.product), sizeof(tmpstr));
SASBADDVARSTRDESC(sb, indent, tmpstr, %s, product,
sizeof(cgd.inq_data.product) + 1, "SCSI Product ID");
cam_strvis(tmpstr, cgd.inq_data.revision,
sizeof(cgd.inq_data.revision), sizeof(tmpstr));
SASBADDVARSTRDESC(sb, indent, tmpstr, %s, revision,
sizeof(cgd.inq_data.revision) + 1, "SCSI Revision");
if (cgd.serial_num_len > 0) {
char *tmpstr2;
size_t ts2_len;
int ts2_malloc;
ts2_len = 0;
if (cgd.serial_num_len > sizeof(tmpstr)) {
ts2_len = cgd.serial_num_len + 1;
ts2_malloc = 1;
tmpstr2 = malloc(ts2_len, M_SCSISA, M_WAITOK | M_ZERO);
} else {
ts2_len = sizeof(tmpstr);
ts2_malloc = 0;
tmpstr2 = tmpstr;
}
cam_strvis(tmpstr2, cgd.serial_num, cgd.serial_num_len,
ts2_len);
SASBADDVARSTRDESC(sb, indent, tmpstr2, %s, serial_num,
(ssize_t)cgd.serial_num_len + 1, "Serial Number");
if (ts2_malloc != 0)
free(tmpstr2, M_SCSISA);
} else {
/*
* We return a serial_num element in any case, but it will
* be empty if the device has no serial number.
*/
tmpstr[0] = '\0';
SASBADDVARSTRDESC(sb, indent, tmpstr, %s, serial_num,
(ssize_t)0, "Serial Number");
}
SASBADDUINTDESC(sb, indent, softc->maxio, %u, maxio,
"Maximum I/O size allowed by driver and controller");
SASBADDUINTDESC(sb, indent, softc->cpi_maxio, %u, cpi_maxio,
"Maximum I/O size reported by controller");
SASBADDUINTDESC(sb, indent, softc->max_blk, %u, max_blk,
"Maximum block size supported by tape drive and media");
SASBADDUINTDESC(sb, indent, softc->min_blk, %u, min_blk,
"Minimum block size supported by tape drive and media");
SASBADDUINTDESC(sb, indent, softc->blk_gran, %u, blk_gran,
"Block granularity supported by tape drive and media");
maxio_tmp = min(softc->max_blk, softc->maxio);
SASBADDUINTDESC(sb, indent, maxio_tmp, %u, max_effective_iosize,
"Maximum possible I/O size");
SASBADDINTDESC(sb, indent, softc->flags & SA_FLAG_FIXED ? 1 : 0, %d,
fixed_mode, "Set to 1 for fixed block mode, 0 for variable block");
/*
* XXX KDM include SIM, bus, target, LUN?
*/
if (softc->flags & SA_FLAG_COMP_UNSUPP)
tmpint = 0;
else
tmpint = 1;
SASBADDINTDESC(sb, indent, tmpint, %d, compression_supported,
"Set to 1 if compression is supported, 0 if not");
if (softc->flags & SA_FLAG_COMP_ENABLED)
tmpint = 1;
else
tmpint = 0;
SASBADDINTDESC(sb, indent, tmpint, %d, compression_enabled,
"Set to 1 if compression is enabled, 0 if not");
SASBADDUINTDESC(sb, indent, softc->comp_algorithm, %u,
compression_algorithm, "Numeric compression algorithm");
safillprot(softc, &indent, sb);
SASBADDUINTDESC(sb, indent, softc->media_blksize, %u,
media_blocksize, "Block size reported by drive or set by user");
SASBADDINTDESC(sb, indent, (intmax_t)softc->fileno, %jd,
calculated_fileno, "Calculated file number, -1 if unknown");
SASBADDINTDESC(sb, indent, (intmax_t)softc->blkno, %jd,
calculated_rel_blkno, "Calculated block number relative to file, "
"set to -1 if unknown");
SASBADDINTDESC(sb, indent, (intmax_t)softc->rep_fileno, %jd,
reported_fileno, "File number reported by drive, -1 if unknown");
SASBADDINTDESC(sb, indent, (intmax_t)softc->rep_blkno, %jd,
reported_blkno, "Block number relative to BOP/BOT reported by "
"drive, -1 if unknown");
SASBADDINTDESC(sb, indent, (intmax_t)softc->partition, %jd,
partition, "Current partition number, 0 is the default");
SASBADDINTDESC(sb, indent, softc->bop, %d, bop,
"Set to 1 if drive is at the beginning of partition/tape, 0 if "
"not, -1 if unknown");
SASBADDINTDESC(sb, indent, softc->eop, %d, eop,
"Set to 1 if drive is past early warning, 0 if not, -1 if unknown");
SASBADDINTDESC(sb, indent, softc->bpew, %d, bpew,
"Set to 1 if drive is past programmable early warning, 0 if not, "
"-1 if unknown");
SASBADDINTDESC(sb, indent, (intmax_t)softc->last_io_resid, %jd,
residual, "Residual for the last I/O");
/*
* XXX KDM should we send a string with the current driver
* status already decoded instead of a numeric value?
*/
SASBADDINTDESC(sb, indent, softc->dsreg, %d, dsreg,
"Current state of the driver");
safilldensitysb(softc, &indent, sb);
SASBENDNODE(sb, indent, mtextget);
extget_bailout:
return (error);
}
static int
saparamget(struct sa_softc *softc, struct sbuf *sb)
{
int indent;
indent = 0;
SASBADDNODE(sb, indent, mtparamget);
SASBADDINTDESC(sb, indent, softc->sili, %d, sili,
"Suppress an error on underlength variable reads");
SASBADDINTDESC(sb, indent, softc->eot_warn, %d, eot_warn,
"Return an error to warn that end of tape is approaching");
safillprot(softc, &indent, sb);
SASBENDNODE(sb, indent, mtparamget);
return (0);
}
static void
saprevent(struct cam_periph *periph, int action)
{
struct sa_softc *softc;
union ccb *ccb;
int error, sf;
softc = (struct sa_softc *)periph->softc;
if ((action == PR_ALLOW) && (softc->flags & SA_FLAG_TAPE_LOCKED) == 0)
return;
if ((action == PR_PREVENT) && (softc->flags & SA_FLAG_TAPE_LOCKED) != 0)
return;
/*
* We can be quiet about illegal requests.
*/
if (CAM_DEBUGGED(periph->path, CAM_DEBUG_INFO)) {
sf = 0;
} else
sf = SF_QUIET_IR;
ccb = cam_periph_getccb(periph, 1);
/* It is safe to retry this operation */
scsi_prevent(&ccb->csio, 5, sadone, MSG_SIMPLE_Q_TAG, action,
SSD_FULL_SIZE, SCSIOP_TIMEOUT);
error = cam_periph_runccb(ccb, saerror, 0, sf, softc->device_stats);
if (error == 0) {
if (action == PR_ALLOW)
softc->flags &= ~SA_FLAG_TAPE_LOCKED;
else
softc->flags |= SA_FLAG_TAPE_LOCKED;
}
xpt_release_ccb(ccb);
}
static int
sarewind(struct cam_periph *periph)
{
union ccb *ccb;
struct sa_softc *softc;
int error;
softc = (struct sa_softc *)periph->softc;
ccb = cam_periph_getccb(periph, 1);
/* It is safe to retry this operation */
scsi_rewind(&ccb->csio, 2, sadone, MSG_SIMPLE_Q_TAG, FALSE,
SSD_FULL_SIZE, REWIND_TIMEOUT);
softc->dsreg = MTIO_DSREG_REW;
error = cam_periph_runccb(ccb, saerror, 0, 0, softc->device_stats);
softc->dsreg = MTIO_DSREG_REST;
xpt_release_ccb(ccb);
if (error == 0) {
softc->partition = softc->fileno = softc->blkno = (daddr_t) 0;
softc->rep_fileno = softc->rep_blkno = (daddr_t) 0;
} else {
softc->fileno = softc->blkno = (daddr_t) -1;
softc->partition = (daddr_t) -1;
softc->rep_fileno = softc->rep_blkno = (daddr_t) -1;
}
return (error);
}
static int
saspace(struct cam_periph *periph, int count, scsi_space_code code)
{
union ccb *ccb;
struct sa_softc *softc;
int error;
softc = (struct sa_softc *)periph->softc;
ccb = cam_periph_getccb(periph, 1);
/* This cannot be retried */
scsi_space(&ccb->csio, 0, sadone, MSG_SIMPLE_Q_TAG, code, count,
SSD_FULL_SIZE, SPACE_TIMEOUT);
/*
* Clear residual because we will be using it.
*/
softc->last_ctl_resid = 0;
softc->dsreg = (count < 0)? MTIO_DSREG_REV : MTIO_DSREG_FWD;
error = cam_periph_runccb(ccb, saerror, 0, 0, softc->device_stats);
softc->dsreg = MTIO_DSREG_REST;
xpt_release_ccb(ccb);
/*
* If a spacing operation has failed, we need to invalidate
* this mount.
*
* If the spacing operation was setmarks or to end of recorded data,
* we no longer know our relative position.
*
* If the spacing operations was spacing files in reverse, we
* take account of the residual, but still check against less
* than zero- if we've gone negative, we must have hit BOT.
*
* If the spacing operations was spacing records in reverse and
* we have a residual, we've either hit BOT or hit a filemark.
* In the former case, we know our new record number (0). In
* the latter case, we have absolutely no idea what the real
* record number is- we've stopped between the end of the last
* record in the previous file and the filemark that stopped
* our spacing backwards.
*/
if (error) {
softc->fileno = softc->blkno = (daddr_t) -1;
softc->rep_blkno = softc->partition = (daddr_t) -1;
softc->rep_fileno = (daddr_t) -1;
} else if (code == SS_SETMARKS || code == SS_EOD) {
softc->fileno = softc->blkno = (daddr_t) -1;
} else if (code == SS_FILEMARKS && softc->fileno != (daddr_t) -1) {
softc->fileno += (count - softc->last_ctl_resid);
if (softc->fileno < 0) /* we must of hit BOT */
softc->fileno = 0;
softc->blkno = 0;
} else if (code == SS_BLOCKS && softc->blkno != (daddr_t) -1) {
softc->blkno += (count - softc->last_ctl_resid);
if (count < 0) {
if (softc->last_ctl_resid || softc->blkno < 0) {
if (softc->fileno == 0) {
softc->blkno = 0;
} else {
softc->blkno = (daddr_t) -1;
}
}
}
}
if (error == 0)
sagetpos(periph);
return (error);
}
static int
sawritefilemarks(struct cam_periph *periph, int nmarks, int setmarks, int immed)
{
union ccb *ccb;
struct sa_softc *softc;
int error, nwm = 0;
softc = (struct sa_softc *)periph->softc;
if (softc->open_rdonly)
return (EBADF);
ccb = cam_periph_getccb(periph, 1);
/*
* Clear residual because we will be using it.
*/
softc->last_ctl_resid = 0;
softc->dsreg = MTIO_DSREG_FMK;
/* this *must* not be retried */
scsi_write_filemarks(&ccb->csio, 0, sadone, MSG_SIMPLE_Q_TAG,
immed, setmarks, nmarks, SSD_FULL_SIZE, IO_TIMEOUT);
softc->dsreg = MTIO_DSREG_REST;
error = cam_periph_runccb(ccb, saerror, 0, 0, softc->device_stats);
if (error == 0 && nmarks) {
struct sa_softc *softc = (struct sa_softc *)periph->softc;
nwm = nmarks - softc->last_ctl_resid;
softc->filemarks += nwm;
}
xpt_release_ccb(ccb);
/*
* Update relative positions (if we're doing that).
*/
if (error) {
softc->fileno = softc->blkno = softc->partition = (daddr_t) -1;
} else if (softc->fileno != (daddr_t) -1) {
softc->fileno += nwm;
softc->blkno = 0;
}
/*
* Ask the tape drive for position information.
*/
sagetpos(periph);
/*
* If we got valid position information, since we just wrote a file
* mark, we know we're at the file mark and block 0 after that
* filemark.
*/
if (softc->rep_fileno != (daddr_t) -1) {
softc->fileno = softc->rep_fileno;
softc->blkno = 0;
}
return (error);
}
static int
sagetpos(struct cam_periph *periph)
{
union ccb *ccb;
struct scsi_tape_position_long_data long_pos;
struct sa_softc *softc = (struct sa_softc *)periph->softc;
int error;
if (softc->quirks & SA_QUIRK_NO_LONG_POS) {
softc->rep_fileno = (daddr_t) -1;
softc->rep_blkno = (daddr_t) -1;
softc->bop = softc->eop = softc->bpew = -1;
return (EOPNOTSUPP);
}
bzero(&long_pos, sizeof(long_pos));
ccb = cam_periph_getccb(periph, CAM_PRIORITY_NORMAL);
scsi_read_position_10(&ccb->csio,
/*retries*/ 1,
/*cbfcnp*/ sadone,
/*tag_action*/ MSG_SIMPLE_Q_TAG,
/*service_action*/ SA_RPOS_LONG_FORM,
/*data_ptr*/ (uint8_t *)&long_pos,
/*length*/ sizeof(long_pos),
/*sense_len*/ SSD_FULL_SIZE,
/*timeout*/ SCSIOP_TIMEOUT);
softc->dsreg = MTIO_DSREG_RBSY;
error = cam_periph_runccb(ccb, saerror, 0, SF_QUIET_IR,
softc->device_stats);
softc->dsreg = MTIO_DSREG_REST;
if (error == 0) {
if (long_pos.flags & SA_RPOS_LONG_MPU) {
/*
* If the drive doesn't know what file mark it is
* on, our calculated filemark isn't going to be
* accurate either.
*/
softc->fileno = (daddr_t) -1;
softc->rep_fileno = (daddr_t) -1;
} else {
softc->fileno = softc->rep_fileno =
scsi_8btou64(long_pos.logical_file_num);
}
if (long_pos.flags & SA_RPOS_LONG_LONU) {
softc->partition = (daddr_t) -1;
softc->rep_blkno = (daddr_t) -1;
/*
* If the tape drive doesn't know its block
* position, we can't claim to know it either.
*/
softc->blkno = (daddr_t) -1;
} else {
softc->partition = scsi_4btoul(long_pos.partition);
softc->rep_blkno =
scsi_8btou64(long_pos.logical_object_num);
}
if (long_pos.flags & SA_RPOS_LONG_BOP)
softc->bop = 1;
else
softc->bop = 0;
if (long_pos.flags & SA_RPOS_LONG_EOP)
softc->eop = 1;
else
softc->eop = 0;
if (long_pos.flags & SA_RPOS_LONG_BPEW)
softc->bpew = 1;
else
softc->bpew = 0;
} else if (error == EINVAL) {
/*
* If this drive returned an invalid-request type error,
* then it likely doesn't support the long form report.
*/
softc->quirks |= SA_QUIRK_NO_LONG_POS;
}
if (error != 0) {
softc->rep_fileno = softc->rep_blkno = (daddr_t) -1;
softc->partition = (daddr_t) -1;
softc->bop = softc->eop = softc->bpew = -1;
}
xpt_release_ccb(ccb);
return (error);
}
static int
sardpos(struct cam_periph *periph, int hard, u_int32_t *blkptr)
{
struct scsi_tape_position_data loc;
union ccb *ccb;
struct sa_softc *softc = (struct sa_softc *)periph->softc;
int error;
/*
* We try and flush any buffered writes here if we were writing
* and we're trying to get hardware block position. It eats
* up performance substantially, but I'm wary of drive firmware.
*
* I think that *logical* block position is probably okay-
* but hardware block position might have to wait for data
* to hit media to be valid. Caveat Emptor.
*/
if (hard && (softc->flags & SA_FLAG_TAPE_WRITTEN)) {
error = sawritefilemarks(periph, 0, 0, 0);
if (error && error != EACCES)
return (error);
}
ccb = cam_periph_getccb(periph, 1);
scsi_read_position(&ccb->csio, 1, sadone, MSG_SIMPLE_Q_TAG,
hard, &loc, SSD_FULL_SIZE, SCSIOP_TIMEOUT);
softc->dsreg = MTIO_DSREG_RBSY;
error = cam_periph_runccb(ccb, saerror, 0, 0, softc->device_stats);
softc->dsreg = MTIO_DSREG_REST;
if (error == 0) {
if (loc.flags & SA_RPOS_UNCERTAIN) {
error = EINVAL; /* nothing is certain */
} else {
*blkptr = scsi_4btoul(loc.firstblk);
}
}
xpt_release_ccb(ccb);
return (error);
}
static int
sasetpos(struct cam_periph *periph, int hard, struct mtlocate *locate_info)
{
union ccb *ccb;
struct sa_softc *softc;
int locate16;
int immed, cp;
int error;
/*
* We used to try and flush any buffered writes here.
* Now we push this onto user applications to either
* flush the pending writes themselves (via a zero count
* WRITE FILEMARKS command) or they can trust their tape
* drive to do this correctly for them.
*/
softc = (struct sa_softc *)periph->softc;
ccb = cam_periph_getccb(periph, 1);
cp = locate_info->flags & MT_LOCATE_FLAG_CHANGE_PART ? 1 : 0;
immed = locate_info->flags & MT_LOCATE_FLAG_IMMED ? 1 : 0;
/*
* Determine whether we have to use LOCATE or LOCATE16. The hard
* bit is only possible with LOCATE, but the new ioctls do not
* allow setting that bit. So we can't get into the situation of
* having the hard bit set with a block address that is larger than
* 32-bits.
*/
if (hard != 0)
locate16 = 0;
else if ((locate_info->dest_type != MT_LOCATE_DEST_OBJECT)
|| (locate_info->block_address_mode != MT_LOCATE_BAM_IMPLICIT)
|| (locate_info->logical_id > SA_SPOS_MAX_BLK))
locate16 = 1;
else
locate16 = 0;
if (locate16 != 0) {
scsi_locate_16(&ccb->csio,
/*retries*/ 1,
/*cbfcnp*/ sadone,
/*tag_action*/ MSG_SIMPLE_Q_TAG,
/*immed*/ immed,
/*cp*/ cp,
/*dest_type*/ locate_info->dest_type,
/*bam*/ locate_info->block_address_mode,
/*partition*/ locate_info->partition,
/*logical_id*/ locate_info->logical_id,
/*sense_len*/ SSD_FULL_SIZE,
/*timeout*/ SPACE_TIMEOUT);
} else {
uint32_t blk_pointer;
blk_pointer = locate_info->logical_id;
scsi_locate_10(&ccb->csio,
/*retries*/ 1,
/*cbfcnp*/ sadone,
/*tag_action*/ MSG_SIMPLE_Q_TAG,
/*immed*/ immed,
/*cp*/ cp,
/*hard*/ hard,
/*partition*/ locate_info->partition,
/*block_address*/ locate_info->logical_id,
/*sense_len*/ SSD_FULL_SIZE,
/*timeout*/ SPACE_TIMEOUT);
}
softc->dsreg = MTIO_DSREG_POS;
error = cam_periph_runccb(ccb, saerror, 0, 0, softc->device_stats);
softc->dsreg = MTIO_DSREG_REST;
xpt_release_ccb(ccb);
/*
* We assume the calculated file and block numbers are unknown
* unless we have enough information to populate them.
*/
softc->fileno = softc->blkno = (daddr_t) -1;
/*
* If the user requested changing the partition and the request
* succeeded, note the partition.
*/
if ((error == 0)
&& (cp != 0))
softc->partition = locate_info->partition;
else
softc->partition = (daddr_t) -1;
if (error == 0) {
switch (locate_info->dest_type) {
case MT_LOCATE_DEST_FILE:
/*
* This is the only case where we can reliably
* calculate the file and block numbers.
*/
softc->fileno = locate_info->logical_id;
softc->blkno = 0;
break;
case MT_LOCATE_DEST_OBJECT:
case MT_LOCATE_DEST_SET:
case MT_LOCATE_DEST_EOD:
default:
break;
}
}
/*
* Ask the drive for current position information.
*/
sagetpos(periph);
return (error);
}
static int
saretension(struct cam_periph *periph)
{
union ccb *ccb;
struct sa_softc *softc;
int error;
softc = (struct sa_softc *)periph->softc;
ccb = cam_periph_getccb(periph, 1);
/* It is safe to retry this operation */
scsi_load_unload(&ccb->csio, 5, sadone, MSG_SIMPLE_Q_TAG, FALSE,
FALSE, TRUE, TRUE, SSD_FULL_SIZE, ERASE_TIMEOUT);
softc->dsreg = MTIO_DSREG_TEN;
error = cam_periph_runccb(ccb, saerror, 0, 0, softc->device_stats);
softc->dsreg = MTIO_DSREG_REST;
xpt_release_ccb(ccb);
if (error == 0) {
softc->partition = softc->fileno = softc->blkno = (daddr_t) 0;
sagetpos(periph);
} else
softc->partition = softc->fileno = softc->blkno = (daddr_t) -1;
return (error);
}
static int
sareservereleaseunit(struct cam_periph *periph, int reserve)
{
union ccb *ccb;
struct sa_softc *softc;
int error;
softc = (struct sa_softc *)periph->softc;
ccb = cam_periph_getccb(periph, 1);
/* It is safe to retry this operation */
scsi_reserve_release_unit(&ccb->csio, 2, sadone, MSG_SIMPLE_Q_TAG,
FALSE, 0, SSD_FULL_SIZE, SCSIOP_TIMEOUT, reserve);
softc->dsreg = MTIO_DSREG_RBSY;
error = cam_periph_runccb(ccb, saerror, 0,
SF_RETRY_UA | SF_NO_PRINT, softc->device_stats);
softc->dsreg = MTIO_DSREG_REST;
xpt_release_ccb(ccb);
/*
* If the error was Illegal Request, then the device doesn't support
* RESERVE/RELEASE. This is not an error.
*/
if (error == EINVAL) {
error = 0;
}
return (error);
}
static int
saloadunload(struct cam_periph *periph, int load)
{
union ccb *ccb;
struct sa_softc *softc;
int error;
softc = (struct sa_softc *)periph->softc;
ccb = cam_periph_getccb(periph, 1);
/* It is safe to retry this operation */
scsi_load_unload(&ccb->csio, 5, sadone, MSG_SIMPLE_Q_TAG, FALSE,
FALSE, FALSE, load, SSD_FULL_SIZE, REWIND_TIMEOUT);
softc->dsreg = (load)? MTIO_DSREG_LD : MTIO_DSREG_UNL;
error = cam_periph_runccb(ccb, saerror, 0, 0, softc->device_stats);
softc->dsreg = MTIO_DSREG_REST;
xpt_release_ccb(ccb);
if (error || load == 0) {
softc->partition = softc->fileno = softc->blkno = (daddr_t) -1;
softc->rep_fileno = softc->rep_blkno = (daddr_t) -1;
} else if (error == 0) {
softc->partition = softc->fileno = softc->blkno = (daddr_t) 0;
sagetpos(periph);
}
return (error);
}
static int
saerase(struct cam_periph *periph, int longerase)
{
union ccb *ccb;
struct sa_softc *softc;
int error;
softc = (struct sa_softc *)periph->softc;
if (softc->open_rdonly)
return (EBADF);
ccb = cam_periph_getccb(periph, 1);
scsi_erase(&ccb->csio, 1, sadone, MSG_SIMPLE_Q_TAG, FALSE, longerase,
SSD_FULL_SIZE, ERASE_TIMEOUT);
softc->dsreg = MTIO_DSREG_ZER;
error = cam_periph_runccb(ccb, saerror, 0, 0, softc->device_stats);
softc->dsreg = MTIO_DSREG_REST;
xpt_release_ccb(ccb);
return (error);
}
/*
* Fill an sbuf with density data in XML format. This particular macro
* works for multi-byte integer fields.
*
* Note that 1 byte fields aren't supported here. The reason is that the
* compiler does not evaluate the sizeof(), and assumes that any of the
* sizes are possible for a given field. So passing in a multi-byte
* field will result in a warning that the assignment makes an integer
* from a pointer without a cast, if there is an assignment in the 1 byte
* case.
*/
#define SAFILLDENSSB(dens_data, sb, indent, field, desc_remain, \
len_to_go, cur_offset, desc){ \
size_t cur_field_len; \
\
cur_field_len = sizeof(dens_data->field); \
if (desc_remain < cur_field_len) { \
len_to_go -= desc_remain; \
cur_offset += desc_remain; \
continue; \
} \
len_to_go -= cur_field_len; \
cur_offset += cur_field_len; \
desc_remain -= cur_field_len; \
\
switch (sizeof(dens_data->field)) { \
case 1: \
KASSERT(1 == 0, ("Programmer error, invalid 1 byte " \
"field width for SAFILLDENSFIELD")); \
break; \
case 2: \
SASBADDUINTDESC(sb, indent, \
scsi_2btoul(dens_data->field), %u, field, desc); \
break; \
case 3: \
SASBADDUINTDESC(sb, indent, \
scsi_3btoul(dens_data->field), %u, field, desc); \
break; \
case 4: \
SASBADDUINTDESC(sb, indent, \
scsi_4btoul(dens_data->field), %u, field, desc); \
break; \
case 8: \
SASBADDUINTDESC(sb, indent, \
(uintmax_t)scsi_8btou64(dens_data->field), %ju, \
field, desc); \
break; \
default: \
break; \
} \
};
/*
* Fill an sbuf with density data in XML format. This particular macro
* works for strings.
*/
#define SAFILLDENSSBSTR(dens_data, sb, indent, field, desc_remain, \
len_to_go, cur_offset, desc){ \
size_t cur_field_len; \
char tmpstr[32]; \
\
cur_field_len = sizeof(dens_data->field); \
if (desc_remain < cur_field_len) { \
len_to_go -= desc_remain; \
cur_offset += desc_remain; \
continue; \
} \
len_to_go -= cur_field_len; \
cur_offset += cur_field_len; \
desc_remain -= cur_field_len; \
\
cam_strvis(tmpstr, dens_data->field, \
sizeof(dens_data->field), sizeof(tmpstr)); \
SASBADDVARSTRDESC(sb, indent, tmpstr, %s, field, \
strlen(tmpstr) + 1, desc); \
};
/*
* Fill an sbuf with density data descriptors.
*/
static void
safilldenstypesb(struct sbuf *sb, int *indent, uint8_t *buf, int buf_len,
int is_density)
{
struct scsi_density_hdr *hdr;
uint32_t hdr_len;
int len_to_go, cur_offset;
int length_offset;
int num_reports, need_close;
/*
* We need at least the header length. Note that this isn't an
* error, not all tape drives will have every data type.
*/
if (buf_len < sizeof(*hdr))
goto bailout;
hdr = (struct scsi_density_hdr *)buf;
hdr_len = scsi_2btoul(hdr->length);
len_to_go = min(buf_len - sizeof(*hdr), hdr_len);
if (is_density) {
length_offset = __offsetof(struct scsi_density_data,
bits_per_mm);
} else {
length_offset = __offsetof(struct scsi_medium_type_data,
num_density_codes);
}
cur_offset = sizeof(*hdr);
num_reports = 0;
need_close = 0;
while (len_to_go > length_offset) {
struct scsi_density_data *dens_data;
struct scsi_medium_type_data *type_data;
int desc_remain;
size_t cur_field_len;
dens_data = NULL;
type_data = NULL;
if (is_density) {
dens_data =(struct scsi_density_data *)&buf[cur_offset];
if (dens_data->byte2 & SDD_DLV)
desc_remain = scsi_2btoul(dens_data->length);
else
desc_remain = SDD_DEFAULT_LENGTH -
length_offset;
} else {
type_data = (struct scsi_medium_type_data *)
&buf[cur_offset];
desc_remain = scsi_2btoul(type_data->length);
}
len_to_go -= length_offset;
desc_remain = min(desc_remain, len_to_go);
cur_offset += length_offset;
if (need_close != 0) {
SASBENDNODE(sb, *indent, density_entry);
}
SASBADDNODENUM(sb, *indent, density_entry, num_reports);
num_reports++;
need_close = 1;
if (is_density) {
SASBADDUINTDESC(sb, *indent,
dens_data->primary_density_code, %u,
primary_density_code, "Primary Density Code");
SASBADDUINTDESC(sb, *indent,
dens_data->secondary_density_code, %u,
secondary_density_code, "Secondary Density Code");
SASBADDUINTDESC(sb, *indent,
dens_data->byte2 & ~SDD_DLV, %#x, density_flags,
"Density Flags");
SAFILLDENSSB(dens_data, sb, *indent, bits_per_mm,
desc_remain, len_to_go, cur_offset, "Bits per mm");
SAFILLDENSSB(dens_data, sb, *indent, media_width,
desc_remain, len_to_go, cur_offset, "Media width");
SAFILLDENSSB(dens_data, sb, *indent, tracks,
desc_remain, len_to_go, cur_offset,
"Number of Tracks");
SAFILLDENSSB(dens_data, sb, *indent, capacity,
desc_remain, len_to_go, cur_offset, "Capacity");
SAFILLDENSSBSTR(dens_data, sb, *indent, assigning_org,
desc_remain, len_to_go, cur_offset,
"Assigning Organization");
SAFILLDENSSBSTR(dens_data, sb, *indent, density_name,
desc_remain, len_to_go, cur_offset, "Density Name");
SAFILLDENSSBSTR(dens_data, sb, *indent, description,
desc_remain, len_to_go, cur_offset, "Description");
} else {
int i;
SASBADDUINTDESC(sb, *indent, type_data->medium_type,
%u, medium_type, "Medium Type");
cur_field_len =
__offsetof(struct scsi_medium_type_data,
media_width) -
__offsetof(struct scsi_medium_type_data,
num_density_codes);
if (desc_remain < cur_field_len) {
len_to_go -= desc_remain;
cur_offset += desc_remain;
continue;
}
len_to_go -= cur_field_len;
cur_offset += cur_field_len;
desc_remain -= cur_field_len;
SASBADDINTDESC(sb, *indent,
type_data->num_density_codes, %d,
num_density_codes, "Number of Density Codes");
SASBADDNODE(sb, *indent, density_code_list);
for (i = 0; i < type_data->num_density_codes;
i++) {
SASBADDUINTDESC(sb, *indent,
type_data->primary_density_codes[i], %u,
density_code, "Density Code");
}
SASBENDNODE(sb, *indent, density_code_list);
SAFILLDENSSB(type_data, sb, *indent, media_width,
desc_remain, len_to_go, cur_offset,
"Media width");
SAFILLDENSSB(type_data, sb, *indent, medium_length,
desc_remain, len_to_go, cur_offset,
"Medium length");
/*
* Account for the two reserved bytes.
*/
cur_field_len = sizeof(type_data->reserved2);
if (desc_remain < cur_field_len) {
len_to_go -= desc_remain;
cur_offset += desc_remain;
continue;
}
len_to_go -= cur_field_len;
cur_offset += cur_field_len;
desc_remain -= cur_field_len;
SAFILLDENSSBSTR(type_data, sb, *indent, assigning_org,
desc_remain, len_to_go, cur_offset,
"Assigning Organization");
SAFILLDENSSBSTR(type_data, sb, *indent,
medium_type_name, desc_remain, len_to_go,
cur_offset, "Medium type name");
SAFILLDENSSBSTR(type_data, sb, *indent, description,
desc_remain, len_to_go, cur_offset, "Description");
}
}
if (need_close != 0) {
SASBENDNODE(sb, *indent, density_entry);
}
bailout:
return;
}
/*
* Fill an sbuf with density data information
*/
static void
safilldensitysb(struct sa_softc *softc, int *indent, struct sbuf *sb)
{
int i, is_density;
SASBADDNODE(sb, *indent, mtdensity);
SASBADDUINTDESC(sb, *indent, softc->media_density, %u, media_density,
"Current Medium Density");
is_density = 0;
for (i = 0; i < SA_DENSITY_TYPES; i++) {
int tmpint;
if (softc->density_info_valid[i] == 0)
continue;
SASBADDNODE(sb, *indent, density_report);
if (softc->density_type_bits[i] & SRDS_MEDIUM_TYPE) {
tmpint = 1;
is_density = 0;
} else {
tmpint = 0;
is_density = 1;
}
SASBADDINTDESC(sb, *indent, tmpint, %d, medium_type_report,
"Medium type report");
if (softc->density_type_bits[i] & SRDS_MEDIA)
tmpint = 1;
else
tmpint = 0;
SASBADDINTDESC(sb, *indent, tmpint, %d, media_report,
"Media report");
safilldenstypesb(sb, indent, softc->density_info[i],
softc->density_info_valid[i], is_density);
SASBENDNODE(sb, *indent, density_report);
}
SASBENDNODE(sb, *indent, mtdensity);
}
#endif /* _KERNEL */
/*
* Read tape block limits command.
*/
void
scsi_read_block_limits(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int8_t tag_action,
struct scsi_read_block_limits_data *rlimit_buf,
u_int8_t sense_len, u_int32_t timeout)
{
struct scsi_read_block_limits *scsi_cmd;
cam_fill_csio(csio, retries, cbfcnp, CAM_DIR_IN, tag_action,
(u_int8_t *)rlimit_buf, sizeof(*rlimit_buf), sense_len,
sizeof(*scsi_cmd), timeout);
scsi_cmd = (struct scsi_read_block_limits *)&csio->cdb_io.cdb_bytes;
bzero(scsi_cmd, sizeof(*scsi_cmd));
scsi_cmd->opcode = READ_BLOCK_LIMITS;
}
void
scsi_sa_read_write(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int8_t tag_action, int readop, int sli,
int fixed, u_int32_t length, u_int8_t *data_ptr,
u_int32_t dxfer_len, u_int8_t sense_len, u_int32_t timeout)
{
struct scsi_sa_rw *scsi_cmd;
int read;
read = (readop & SCSI_RW_DIRMASK) == SCSI_RW_READ;
scsi_cmd = (struct scsi_sa_rw *)&csio->cdb_io.cdb_bytes;
scsi_cmd->opcode = read ? SA_READ : SA_WRITE;
scsi_cmd->sli_fixed = 0;
if (sli && read)
scsi_cmd->sli_fixed |= SAR_SLI;
if (fixed)
scsi_cmd->sli_fixed |= SARW_FIXED;
scsi_ulto3b(length, scsi_cmd->length);
scsi_cmd->control = 0;
cam_fill_csio(csio, retries, cbfcnp, (read ? CAM_DIR_IN : CAM_DIR_OUT) |
((readop & SCSI_RW_BIO) != 0 ? CAM_DATA_BIO : 0),
tag_action, data_ptr, dxfer_len, sense_len,
sizeof(*scsi_cmd), timeout);
}
void
scsi_load_unload(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int8_t tag_action, int immediate, int eot,
int reten, int load, u_int8_t sense_len,
u_int32_t timeout)
{
struct scsi_load_unload *scsi_cmd;
scsi_cmd = (struct scsi_load_unload *)&csio->cdb_io.cdb_bytes;
bzero(scsi_cmd, sizeof(*scsi_cmd));
scsi_cmd->opcode = LOAD_UNLOAD;
if (immediate)
scsi_cmd->immediate = SLU_IMMED;
if (eot)
scsi_cmd->eot_reten_load |= SLU_EOT;
if (reten)
scsi_cmd->eot_reten_load |= SLU_RETEN;
if (load)
scsi_cmd->eot_reten_load |= SLU_LOAD;
cam_fill_csio(csio, retries, cbfcnp, CAM_DIR_NONE, tag_action,
NULL, 0, sense_len, sizeof(*scsi_cmd), timeout);
}
void
scsi_rewind(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int8_t tag_action, int immediate, u_int8_t sense_len,
u_int32_t timeout)
{
struct scsi_rewind *scsi_cmd;
scsi_cmd = (struct scsi_rewind *)&csio->cdb_io.cdb_bytes;
bzero(scsi_cmd, sizeof(*scsi_cmd));
scsi_cmd->opcode = REWIND;
if (immediate)
scsi_cmd->immediate = SREW_IMMED;
cam_fill_csio(csio, retries, cbfcnp, CAM_DIR_NONE, tag_action, NULL,
0, sense_len, sizeof(*scsi_cmd), timeout);
}
void
scsi_space(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int8_t tag_action, scsi_space_code code,
u_int32_t count, u_int8_t sense_len, u_int32_t timeout)
{
struct scsi_space *scsi_cmd;
scsi_cmd = (struct scsi_space *)&csio->cdb_io.cdb_bytes;
scsi_cmd->opcode = SPACE;
scsi_cmd->code = code;
scsi_ulto3b(count, scsi_cmd->count);
scsi_cmd->control = 0;
cam_fill_csio(csio, retries, cbfcnp, CAM_DIR_NONE, tag_action, NULL,
0, sense_len, sizeof(*scsi_cmd), timeout);
}
void
scsi_write_filemarks(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int8_t tag_action, int immediate, int setmark,
u_int32_t num_marks, u_int8_t sense_len,
u_int32_t timeout)
{
struct scsi_write_filemarks *scsi_cmd;
scsi_cmd = (struct scsi_write_filemarks *)&csio->cdb_io.cdb_bytes;
bzero(scsi_cmd, sizeof(*scsi_cmd));
scsi_cmd->opcode = WRITE_FILEMARKS;
if (immediate)
scsi_cmd->byte2 |= SWFMRK_IMMED;
if (setmark)
scsi_cmd->byte2 |= SWFMRK_WSMK;
scsi_ulto3b(num_marks, scsi_cmd->num_marks);
cam_fill_csio(csio, retries, cbfcnp, CAM_DIR_NONE, tag_action, NULL,
0, sense_len, sizeof(*scsi_cmd), timeout);
}
/*
* The reserve and release unit commands differ only by their opcodes.
*/
void
scsi_reserve_release_unit(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int8_t tag_action, int third_party,
int third_party_id, u_int8_t sense_len,
u_int32_t timeout, int reserve)
{
struct scsi_reserve_release_unit *scsi_cmd;
scsi_cmd = (struct scsi_reserve_release_unit *)&csio->cdb_io.cdb_bytes;
bzero(scsi_cmd, sizeof(*scsi_cmd));
if (reserve)
scsi_cmd->opcode = RESERVE_UNIT;
else
scsi_cmd->opcode = RELEASE_UNIT;
if (third_party) {
scsi_cmd->lun_thirdparty |= SRRU_3RD_PARTY;
scsi_cmd->lun_thirdparty |=
((third_party_id << SRRU_3RD_SHAMT) & SRRU_3RD_MASK);
}
cam_fill_csio(csio, retries, cbfcnp, CAM_DIR_NONE, tag_action, NULL,
0, sense_len, sizeof(*scsi_cmd), timeout);
}
void
scsi_erase(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int8_t tag_action, int immediate, int long_erase,
u_int8_t sense_len, u_int32_t timeout)
{
struct scsi_erase *scsi_cmd;
scsi_cmd = (struct scsi_erase *)&csio->cdb_io.cdb_bytes;
bzero(scsi_cmd, sizeof(*scsi_cmd));
scsi_cmd->opcode = ERASE;
if (immediate)
scsi_cmd->lun_imm_long |= SE_IMMED;
if (long_erase)
scsi_cmd->lun_imm_long |= SE_LONG;
cam_fill_csio(csio, retries, cbfcnp, CAM_DIR_NONE, tag_action, NULL,
0, sense_len, sizeof(*scsi_cmd), timeout);
}
/*
* Read Tape Position command.
*/
void
scsi_read_position(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int8_t tag_action, int hardsoft,
struct scsi_tape_position_data *sbp,
u_int8_t sense_len, u_int32_t timeout)
{
struct scsi_tape_read_position *scmd;
cam_fill_csio(csio, retries, cbfcnp, CAM_DIR_IN, tag_action,
(u_int8_t *)sbp, sizeof (*sbp), sense_len, sizeof(*scmd), timeout);
scmd = (struct scsi_tape_read_position *)&csio->cdb_io.cdb_bytes;
bzero(scmd, sizeof(*scmd));
scmd->opcode = READ_POSITION;
scmd->byte1 = hardsoft;
}
/*
* Read Tape Position command.
*/
void
scsi_read_position_10(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int8_t tag_action, int service_action,
u_int8_t *data_ptr, u_int32_t length,
u_int32_t sense_len, u_int32_t timeout)
{
struct scsi_tape_read_position *scmd;
cam_fill_csio(csio,
retries,
cbfcnp,
/*flags*/CAM_DIR_IN,
tag_action,
/*data_ptr*/data_ptr,
/*dxfer_len*/length,
sense_len,
sizeof(*scmd),
timeout);
scmd = (struct scsi_tape_read_position *)&csio->cdb_io.cdb_bytes;
bzero(scmd, sizeof(*scmd));
scmd->opcode = READ_POSITION;
scmd->byte1 = service_action;
/*
* The length is only currently set (as of SSC4r03) if the extended
* form is specified. The other forms have fixed lengths.
*/
if (service_action == SA_RPOS_EXTENDED_FORM)
scsi_ulto2b(length, scmd->length);
}
/*
* Set Tape Position command.
*/
void
scsi_set_position(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int8_t tag_action, int hardsoft, u_int32_t blkno,
u_int8_t sense_len, u_int32_t timeout)
{
struct scsi_tape_locate *scmd;
cam_fill_csio(csio, retries, cbfcnp, CAM_DIR_NONE, tag_action,
(u_int8_t *)NULL, 0, sense_len, sizeof(*scmd), timeout);
scmd = (struct scsi_tape_locate *)&csio->cdb_io.cdb_bytes;
bzero(scmd, sizeof(*scmd));
scmd->opcode = LOCATE;
if (hardsoft)
scmd->byte1 |= SA_SPOS_BT;
scsi_ulto4b(blkno, scmd->blkaddr);
}
/*
* XXX KDM figure out how to make a compatibility function.
*/
void
scsi_locate_10(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int8_t tag_action, int immed, int cp, int hard,
int64_t partition, u_int32_t block_address,
int sense_len, u_int32_t timeout)
{
struct scsi_tape_locate *scmd;
cam_fill_csio(csio,
retries,
cbfcnp,
CAM_DIR_NONE,
tag_action,
/*data_ptr*/ NULL,
/*dxfer_len*/ 0,
sense_len,
sizeof(*scmd),
timeout);
scmd = (struct scsi_tape_locate *)&csio->cdb_io.cdb_bytes;
bzero(scmd, sizeof(*scmd));
scmd->opcode = LOCATE;
if (immed)
scmd->byte1 |= SA_SPOS_IMMED;
if (cp)
scmd->byte1 |= SA_SPOS_CP;
if (hard)
scmd->byte1 |= SA_SPOS_BT;
scsi_ulto4b(block_address, scmd->blkaddr);
scmd->partition = partition;
}
void
scsi_locate_16(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int8_t tag_action, int immed, int cp, u_int8_t dest_type,
int bam, int64_t partition, u_int64_t logical_id,
int sense_len, u_int32_t timeout)
{
struct scsi_locate_16 *scsi_cmd;
cam_fill_csio(csio,
retries,
cbfcnp,
/*flags*/CAM_DIR_NONE,
tag_action,
/*data_ptr*/NULL,
/*dxfer_len*/0,
sense_len,
sizeof(*scsi_cmd),
timeout);
scsi_cmd = (struct scsi_locate_16 *)&csio->cdb_io.cdb_bytes;
bzero(scsi_cmd, sizeof(*scsi_cmd));
scsi_cmd->opcode = LOCATE_16;
if (immed)
scsi_cmd->byte1 |= SA_LC_IMMEDIATE;
if (cp)
scsi_cmd->byte1 |= SA_LC_CP;
scsi_cmd->byte1 |= (dest_type << SA_LC_DEST_TYPE_SHIFT);
scsi_cmd->byte2 |= bam;
scsi_cmd->partition = partition;
scsi_u64to8b(logical_id, scsi_cmd->logical_id);
}
void
scsi_report_density_support(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int8_t tag_action, int media, int medium_type,
u_int8_t *data_ptr, u_int32_t length,
u_int32_t sense_len, u_int32_t timeout)
{
struct scsi_report_density_support *scsi_cmd;
scsi_cmd =(struct scsi_report_density_support *)&csio->cdb_io.cdb_bytes;
bzero(scsi_cmd, sizeof(*scsi_cmd));
scsi_cmd->opcode = REPORT_DENSITY_SUPPORT;
if (media != 0)
scsi_cmd->byte1 |= SRDS_MEDIA;
if (medium_type != 0)
scsi_cmd->byte1 |= SRDS_MEDIUM_TYPE;
scsi_ulto2b(length, scsi_cmd->length);
cam_fill_csio(csio,
retries,
cbfcnp,
/*flags*/CAM_DIR_IN,
tag_action,
/*data_ptr*/data_ptr,
/*dxfer_len*/length,
sense_len,
sizeof(*scsi_cmd),
timeout);
}
void
scsi_set_capacity(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int8_t tag_action, int byte1, u_int32_t proportion,
u_int32_t sense_len, u_int32_t timeout)
{
struct scsi_set_capacity *scsi_cmd;
scsi_cmd = (struct scsi_set_capacity *)&csio->cdb_io.cdb_bytes;
bzero(scsi_cmd, sizeof(*scsi_cmd));
scsi_cmd->opcode = SET_CAPACITY;
scsi_cmd->byte1 = byte1;
scsi_ulto2b(proportion, scsi_cmd->cap_proportion);
cam_fill_csio(csio,
retries,
cbfcnp,
/*flags*/CAM_DIR_NONE,
tag_action,
/*data_ptr*/NULL,
/*dxfer_len*/0,
sense_len,
sizeof(*scsi_cmd),
timeout);
}
void
scsi_format_medium(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int8_t tag_action, int byte1, int byte2,
u_int8_t *data_ptr, u_int32_t dxfer_len,
u_int32_t sense_len, u_int32_t timeout)
{
struct scsi_format_medium *scsi_cmd;
scsi_cmd = (struct scsi_format_medium*)&csio->cdb_io.cdb_bytes;
bzero(scsi_cmd, sizeof(*scsi_cmd));
scsi_cmd->opcode = FORMAT_MEDIUM;
scsi_cmd->byte1 = byte1;
scsi_cmd->byte2 = byte2;
scsi_ulto2b(dxfer_len, scsi_cmd->length);
cam_fill_csio(csio,
retries,
cbfcnp,
/*flags*/(dxfer_len > 0) ? CAM_DIR_OUT : CAM_DIR_NONE,
tag_action,
/*data_ptr*/ data_ptr,
/*dxfer_len*/ dxfer_len,
sense_len,
sizeof(*scsi_cmd),
timeout);
}
void
scsi_allow_overwrite(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int8_t tag_action, int allow_overwrite, int partition,
u_int64_t logical_id, u_int32_t sense_len, u_int32_t timeout)
{
struct scsi_allow_overwrite *scsi_cmd;
scsi_cmd = (struct scsi_allow_overwrite *)&csio->cdb_io.cdb_bytes;
bzero(scsi_cmd, sizeof(*scsi_cmd));
scsi_cmd->opcode = ALLOW_OVERWRITE;
scsi_cmd->allow_overwrite = allow_overwrite;
scsi_cmd->partition = partition;
scsi_u64to8b(logical_id, scsi_cmd->logical_id);
cam_fill_csio(csio,
retries,
cbfcnp,
CAM_DIR_NONE,
tag_action,
/*data_ptr*/ NULL,
/*dxfer_len*/ 0,
sense_len,
sizeof(*scsi_cmd),
timeout);
}
Reference in New Issue View Git Blame Copy Permalink