freebsd-dev/sys/arm/at91
John Baldwin a2677ff239 Don't bother clearing maps for static DMA allocations to NULL. Instead,
leave them as purely opaque values that are only set by bus_dmamem_alloc().
2014-06-17 18:10:06 +00:00
..
at91_aic.c Move AIC related stuff to own file. 2014-03-08 06:06:50 +00:00
at91_aicreg.h Import preliminary support for Atmel AT91SAM9G20 cpu, and the Hot-e HL201. 2010-07-14 00:48:53 +00:00
at91_cfata.c
at91_gpio.h Provide a simplified way to specify GPIO pins for the Atmel port. 2014-01-15 19:49:12 +00:00
at91_machdep.c When mapping device memory, use PTE_DEVICE rather than PTE_NOCACHE. 2014-05-10 20:03:03 +00:00
at91_mci.c Add FDT matching code. 2014-02-09 20:55:49 +00:00
at91_mcireg.h - Add support for MCI1 revision 2xx controllers and a work-around for their 2012-04-22 00:43:32 +00:00
at91_pdcreg.h
at91_pio_sam9g20.h Add support for the AT91SAM9260 2010-10-06 22:40:27 +00:00
at91_pio_sam9g45.h Add support for the Atmel AT91SAM9G45 CPU. 2012-07-26 08:01:25 +00:00
at91_pio.c Add FDT attachment. 2014-02-09 20:56:39 +00:00
at91_pioreg.h Add definitions for the additional PIO pins found on recent AT91 SoCs. 2013-12-02 02:33:03 +00:00
at91_piovar.h Fix regression issue after r248910. 2013-04-07 13:03:57 +00:00
at91_pit.c Add FDT attachment, plus minor code shuffle. 2014-02-09 20:57:26 +00:00
at91_pitreg.h at91pit->at91_pit for consistnecy with other drivers. 2012-07-11 17:11:54 +00:00
at91_pmc.c Add FDT attachment. 2014-02-09 20:58:03 +00:00
at91_pmcreg.h Add charge pump current register. 2012-08-10 04:47:20 +00:00
at91_pmcvar.h Correct the PLLA setting functions and centralize. 2012-08-11 05:45:19 +00:00
at91_reset.S Eliminate the AT91XXXX_BASE for each SoC. AT91_BASE is the right way 2012-07-10 02:14:50 +00:00
at91_rst.c Add FDT attachment. Flag lost functionality with FDT_HACKS so we can 2014-02-09 20:59:46 +00:00
at91_rstreg.h at91$DEV->at91_$DEV to match other Atmel drivers. Also, export 2012-07-11 17:11:07 +00:00
at91_rtc.c Loop reading the RTC registers until the same values are obtained 2012-10-07 20:36:46 +00:00
at91_rtcreg.h Use the RTC unit to get the time. This works on all known AT91SAM9* 2012-10-07 01:58:32 +00:00
at91_sdramc.c Add device node for SDRAMC device. Currently just claims device's 2014-02-28 02:59:51 +00:00
at91_shdwc.c shdwc device for fdt 2014-02-28 03:00:25 +00:00
at91_smc.c Add standard memory controller helper functions. 2014-01-19 17:45:13 +00:00
at91_smc.h Add standard memory controller helper functions. 2014-01-19 17:45:13 +00:00
at91_spi.c Honor the disabled status by only grabbing resources and returning 2014-02-13 16:50:08 +00:00
at91_spireg.h - Prepend the device description with "AT91" to reflect its nature. [1] 2012-06-03 00:54:10 +00:00
at91_ssc.c Strip trailing whitespace before other changes. 2012-06-13 04:52:19 +00:00
at91_sscreg.h
at91_st.c Make the SoC stuff a little more modular, and start to move away from 2012-07-11 20:17:14 +00:00
at91_streg.h Make the SoC stuff a little more modular, and start to move away from 2012-07-11 20:17:14 +00:00
at91_tcb.c tcb device for fdt 2014-02-28 03:00:28 +00:00
at91_twi.c Honor the disabled status by only grabbing resources and returning 2014-02-13 16:50:08 +00:00
at91_twiio.h
at91_twireg.h Add support for the Atmel SAM9XE familiy of microcontrollers, which 2012-04-14 17:09:38 +00:00
at91_usartreg.h
at91_wdt.c FDT attachment... 2014-02-09 21:01:53 +00:00
at91_wdtreg.h Strip trailing whitespace before other changes. 2012-06-13 04:52:19 +00:00
at91.c Move AIC related stuff to own file. 2014-03-08 06:06:50 +00:00
at91board.h Create a generic way to support multiple boards within an 2012-07-07 05:02:39 +00:00
at91reg.h The system IRQ is always IRQ 1. Make it so. 2012-07-10 02:39:03 +00:00
at91rm92reg.h Switch to using PAs rather than VAs for the addresses we map for 2014-01-31 15:38:05 +00:00
at91rm9200_devices.c Fix a typo: the RXD0 pin is PA18, not PA19. 2013-03-29 18:06:54 +00:00
at91rm9200.c Move AIC related stuff to own file. 2014-03-08 06:06:50 +00:00
at91rm9200var.h Configure the peripheral pins for MCI devices. Eliminate the now-unused 2012-07-15 05:41:43 +00:00
at91sam9g20.c Move AIC related stuff to own file. 2014-03-08 06:06:50 +00:00
at91sam9g20reg.h Move AIC related stuff to own file. 2014-03-08 06:06:50 +00:00
at91sam9g45.c Add data so we can convert a PIO unit number into a base address. 2014-01-15 19:53:36 +00:00
at91sam9g45reg.h Switch to using PAs rather than VAs for the addresses we map for 2014-01-31 15:38:05 +00:00
at91sam9x5.c Move AIC related stuff to own file. 2014-03-08 06:06:50 +00:00
at91sam9x5reg.h Remove bogus define that causes compile errors. Most of the defines 2014-03-09 02:28:30 +00:00
at91sam9260.c Add data so we can convert a PIO unit number into a base address. 2014-01-15 19:53:36 +00:00
at91sam9260reg.h Fix AT91SAM9260 to work with PA rather than VA device addresses. 2014-02-01 17:53:35 +00:00
at91soc.c Make the SoC stuff a little more modular, and start to move away from 2012-07-11 20:17:14 +00:00
at91soc.h Make the SoC stuff a little more modular, and start to move away from 2012-07-11 20:17:14 +00:00
at91var.h Make at91_soc_id() public. 2014-03-08 05:03:56 +00:00
board_bwct.c Configure the peripheral pins for MCI devices. Eliminate the now-unused 2012-07-15 05:41:43 +00:00
board_eb9200.c Fix board ID too... 2014-02-13 15:47:41 +00:00
board_ethernut5.c uboot should be telling us it is an ETHERNUT5 for this board. Tag it 2012-07-14 06:00:37 +00:00
board_hl200.c Configure the peripheral pins for MCI devices. Eliminate the now-unused 2012-07-15 05:41:43 +00:00
board_hl201.c Connect NAND for the SAM9260EK eval board, as well as the HotE HL-201. 2014-01-19 17:59:34 +00:00
board_kb920x.c Configure the peripheral pins for MCI devices. Eliminate the now-unused 2012-07-15 05:41:43 +00:00
board_qila9g20.c Create a generic way to support multiple boards within an 2012-07-07 05:02:39 +00:00
board_sam9g20ek.c Create a generic way to support multiple boards within an 2012-07-07 05:02:39 +00:00
board_sam9x25ek.c Create a generic way to support multiple boards within an 2012-07-07 05:02:39 +00:00
board_sam9260ek.c Fix gcc with -Wstrict-prototypes by telling it bi_emac takes no parameters. 2014-01-25 19:36:27 +00:00
board_sn9g45.c Add new at91sam9g45 support and sn9g45 board to the ATMEL kernel. 2012-07-27 16:38:02 +00:00
board_tsc4370.c Remove extra semicolons. 2014-06-06 16:37:42 +00:00
files.at91 Eliminate irq_dispatch.S. Move the data items it contained into arm/intr.c 2014-03-10 18:10:09 +00:00
if_ate.c Don't bother clearing maps for static DMA allocations to NULL. Instead, 2014-06-17 18:10:06 +00:00
if_atereg.h if_ate.c: 2010-10-06 22:25:21 +00:00
if_macb.c Fix various NIC drivers to properly cleanup static DMA resources. 2014-06-11 14:53:58 +00:00
if_macbreg.h Import preliminary support for Atmel AT91SAM9G20 cpu, and the Hot-e HL201. 2010-07-14 00:48:53 +00:00
if_macbvar.h Fix undefined behavior: (1 << 31) is not defined as 1 is an int and this 2013-11-30 22:17:27 +00:00
std.at91 Set machine correctly on ARM. This allows universe to use the correct world 2012-08-18 05:48:19 +00:00
std.at91sam9 Set machine correctly on ARM. This allows universe to use the correct world 2012-08-18 05:48:19 +00:00
std.at91sam9g45 Set machine correctly on ARM. This allows universe to use the correct world 2012-08-18 05:48:19 +00:00
std.atmel Set machine correctly on ARM. This allows universe to use the correct world 2012-08-18 05:48:19 +00:00
std.bwct Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with 2014-01-28 09:12:04 +00:00
std.eb9200 Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with 2014-01-28 09:12:04 +00:00
std.ethernut5 Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with 2014-01-28 09:12:04 +00:00
std.hl200 Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with 2014-01-28 09:12:04 +00:00
std.hl201 Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with 2014-01-28 09:12:04 +00:00
std.kb920x Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with 2014-01-28 09:12:04 +00:00
std.qila9g20 Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with 2014-01-28 09:12:04 +00:00
std.sam9g20ek Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with 2014-01-28 09:12:04 +00:00
std.sam9x25ek Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with 2014-01-28 09:12:04 +00:00
std.sam9260ek Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with 2014-01-28 09:12:04 +00:00
std.sn9g45 Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with 2014-01-28 09:12:04 +00:00
std.tsc4370 Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with 2014-01-28 09:12:04 +00:00
uart_bus_at91usart.c Remove redundant declaration for uart devclass. 2014-01-24 16:50:15 +00:00
uart_cpu_at91usart.c Remove redundant declaration for uart devclass. 2014-01-24 16:50:15 +00:00
uart_dev_at91usart.c Style(9) nit: Use tab here. 2014-02-27 08:19:19 +00:00