FreeBSD src
Go to file
Neel Natu ea7f1c8cd2 Add support for PCI-to-ISA LPC bridge emulation. If the LPC bus is attached
to a virtual machine then we implicitly create COM1 and COM2 ISA devices.

Prior to this change the only way of attaching a COM port to the virtual
machine was by presenting it as a PCI device that is mapped at the legacy
I/O address 0x3F8 or 0x2F8.

There were some issues with the original approach:
- It did not work at all with UEFI because UEFI will reprogram the PCI device
  BARs and remap the COM1/COM2 ports at non-legacy addresses.
- OpenBSD GENERIC kernel does not create a /dev/console because it expects
  the uart device at the legacy 0x3F8/0x2F8 address to be an ISA device.
- It was functional with a FreeBSD guest but caused the console to appear
  on /dev/ttyu2 which was not intuitive.

The uart emulation is now independent of the bus on which it resides. Thus it
is possible to have uart devices on the PCI bus in addition to the legacy
COM1/COM2 devices behind the LPC bus.

The command line option to attach ISA COM1/COM2 ports to a virtual machine is
"-s <bus>,lpc -l com1,stdio".

The command line option to create a PCI-attached uart device is:
"-s <bus>,uart[,stdio]"

The command line option to create PCI-attached COM1/COM2 device is:
"-S <bus>,uart[,stdio]". This style of creating COM ports is deprecated.

Discussed with:	grehan
Reviewed by:	grehan
Submitted by:	Tycho Nightingale (tycho.nightingale@pluribusnetworks.com)

M    share/examples/bhyve/vmrun.sh
AM   usr.sbin/bhyve/legacy_irq.c
AM   usr.sbin/bhyve/legacy_irq.h
M    usr.sbin/bhyve/Makefile
AM   usr.sbin/bhyve/uart_emul.c
M    usr.sbin/bhyve/bhyverun.c
AM   usr.sbin/bhyve/uart_emul.h
M    usr.sbin/bhyve/pci_uart.c
M    usr.sbin/bhyve/pci_emul.c
M    usr.sbin/bhyve/inout.c
M    usr.sbin/bhyve/pci_emul.h
M    usr.sbin/bhyve/inout.h
AM   usr.sbin/bhyve/pci_lpc.c
AM   usr.sbin/bhyve/pci_lpc.h
2013-10-29 00:18:11 +00:00
bin Clean up a spurious "." in SEE ALSO. 2013-10-28 23:02:12 +00:00
cddl If the initial attempt to open /dev/ksyms fails, kldload the ksyms module 2013-10-27 16:18:48 +00:00
contrib Queisce two category of clang warnings: 2013-10-28 18:24:31 +00:00
crypto Unbreak the WITHOUT_KERBEROS build and try to reduce the odds of a 2013-09-23 20:35:54 +00:00
etc Remove more remnants of ng_fec(4). 2013-10-28 16:21:31 +00:00
games Refresh the tips for the new pkg system. 2013-10-03 11:51:15 +00:00
gnu Enable the --sysroot=/foo option in ld by always building with a sysroot 2013-10-28 19:56:46 +00:00
include Move new pf includes to the pf directory. The pfvar.h remain 2013-10-27 16:25:57 +00:00
kerberos5 Clean up the Kerberos build by turning libheimipcc and libheimipcs into 2013-09-10 18:40:43 +00:00
lib Remove ng_fec(4). 2013-10-28 14:47:33 +00:00
libexec By popular demand, move freebsd-version(1) from /libexec to /bin. 2013-10-09 20:47:20 +00:00
release help running sshd on picobsd 2013-10-16 16:53:00 +00:00
rescue - Trim an unused and bogus Makefile for mount_smbfs. 2013-06-28 21:00:08 +00:00
sbin Import pf_print_state.c 1.54 from OpenBSD 2013-10-27 21:07:37 +00:00
secure Unbreak the WITHOUT_KERBEROS build and try to reduce the odds of a 2013-09-23 20:35:54 +00:00
share Add support for PCI-to-ISA LPC bridge emulation. If the LPC bus is attached 2013-10-29 00:18:11 +00:00
sys Fix condition that determines PMAP_NEEDS_PTE_SYNC value for ARM 2013-10-28 23:42:44 +00:00
tests Set up the /usr/tests hierarchy. 2013-10-25 05:25:19 +00:00
tools Switch the default mtree to nmtree our new NetBSD derived mtree. 2013-10-25 22:45:18 +00:00
usr.bin With r247602, the "c" flag is no longer printed as a file descriptor flag. 2013-10-28 00:20:30 +00:00
usr.sbin Add support for PCI-to-ISA LPC bridge emulation. If the LPC bus is attached 2013-10-29 00:18:11 +00:00
COPYRIGHT Happy New Year 2013! 2012-12-31 11:22:55 +00:00
LOCKS Explicitly require Security Officer's approval for kernel PRNG bits. 2013-09-17 14:19:05 +00:00
MAINTAINERS Add myself as maintainer for nvme(4), nvd(4) and nvmecontrol(8). 2013-07-31 18:18:02 +00:00
Makefile Remove the armv6eb architecture as it is unused, and almost certainly 2013-09-22 07:30:17 +00:00
Makefile.inc1 Set up the /usr/tests hierarchy. 2013-10-25 05:25:19 +00:00
ObsoleteFiles.inc ng_fec(4) removed. 2013-10-28 12:49:07 +00:00
README Add the cddl/ directory. 2010-11-14 11:32:56 +00:00
UPDATING Switch the default mtree to nmtree our new NetBSD derived mtree. 2013-10-25 22:45:18 +00:00

This is the top level of the FreeBSD source directory.  This file
was last revised on:
$FreeBSD$

For copyright information, please see the file COPYRIGHT in this
directory (additional copyright information also exists for some
sources in this tree - please see the specific source directories for
more information).

The Makefile in this directory supports a number of targets for
building components (or all) of the FreeBSD source tree, the most
commonly used one being ``world'', which rebuilds and installs
everything in the FreeBSD system from the source tree except the
kernel, the kernel-modules and the contents of /etc.  The ``world''
target should only be used in cases where the source tree has not
changed from the currently running version.  See:
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/makeworld.html
for more information, including setting make(1) variables.

The ``buildkernel'' and ``installkernel'' targets build and install
the kernel and the modules (see below).  Please see the top of
the Makefile in this directory for more information on the
standard build targets and compile-time flags.

Building a kernel is a somewhat more involved process, documentation
for which can be found at:
   http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig.html
And in the config(8) man page.
Note: If you want to build and install the kernel with the
``buildkernel'' and ``installkernel'' targets, you might need to build
world before.  More information is available in the handbook.

The sample kernel configuration files reside in the sys/<arch>/conf
sub-directory (assuming that you've installed the kernel sources), the
file named GENERIC being the one used to build your initial installation
kernel.  The file NOTES contains entries and documentation for all possible
devices, not just those commonly used.  It is the successor of the ancient
LINT file, but in contrast to LINT, it is not buildable as a kernel but a
pure reference and documentation file.


Source Roadmap:
---------------
bin		System/user commands.

cddl		Various commands and libraries under the Common Development
		and Distribution License.

contrib		Packages contributed by 3rd parties.

crypto		Cryptography stuff (see crypto/README).

etc		Template files for /etc.

games		Amusements.

gnu		Various commands and libraries under the GNU Public License.
		Please see gnu/COPYING* for more information.

include		System include files.

kerberos5	Kerberos5 (Heimdal) package.

lib		System libraries.

libexec		System daemons.

release		Release building Makefile & associated tools.

rescue		Build system for statically linked /rescue utilities.

sbin		System commands.

secure		Cryptographic libraries and commands.

share		Shared resources.

sys		Kernel sources.

tools		Utilities for regression testing and miscellaneous tasks.

usr.bin		User commands.

usr.sbin	System administration commands.


For information on synchronizing your source tree with one or more of
the FreeBSD Project's development branches, please see:

  http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/synching.html