to a virtual machine then we implicitly create COM1 and COM2 ISA devices.
Prior to this change the only way of attaching a COM port to the virtual
machine was by presenting it as a PCI device that is mapped at the legacy
I/O address 0x3F8 or 0x2F8.
There were some issues with the original approach:
- It did not work at all with UEFI because UEFI will reprogram the PCI device
BARs and remap the COM1/COM2 ports at non-legacy addresses.
- OpenBSD GENERIC kernel does not create a /dev/console because it expects
the uart device at the legacy 0x3F8/0x2F8 address to be an ISA device.
- It was functional with a FreeBSD guest but caused the console to appear
on /dev/ttyu2 which was not intuitive.
The uart emulation is now independent of the bus on which it resides. Thus it
is possible to have uart devices on the PCI bus in addition to the legacy
COM1/COM2 devices behind the LPC bus.
The command line option to attach ISA COM1/COM2 ports to a virtual machine is
"-s <bus>,lpc -l com1,stdio".
The command line option to create a PCI-attached uart device is:
"-s <bus>,uart[,stdio]"
The command line option to create PCI-attached COM1/COM2 device is:
"-S <bus>,uart[,stdio]". This style of creating COM ports is deprecated.
Discussed with: grehan
Reviewed by: grehan
Submitted by: Tycho Nightingale (tycho.nightingale@pluribusnetworks.com)
M share/examples/bhyve/vmrun.sh
AM usr.sbin/bhyve/legacy_irq.c
AM usr.sbin/bhyve/legacy_irq.h
M usr.sbin/bhyve/Makefile
AM usr.sbin/bhyve/uart_emul.c
M usr.sbin/bhyve/bhyverun.c
AM usr.sbin/bhyve/uart_emul.h
M usr.sbin/bhyve/pci_uart.c
M usr.sbin/bhyve/pci_emul.c
M usr.sbin/bhyve/inout.c
M usr.sbin/bhyve/pci_emul.h
M usr.sbin/bhyve/inout.h
AM usr.sbin/bhyve/pci_lpc.c
AM usr.sbin/bhyve/pci_lpc.h
Use values of the correct defines to determine statement's result.
ARM_ARCH_ symbols are always defined, hence only values are relevant.
Reviewed by: cognet
Sheeva PJ4Bv6 - based chips were only prototypes for V7 class Armada
SoC family. Current in-tree support for PJ4Bv6 will not work and also
there should be no platforms in active use that would incorporate that
CPU revision.
Loading kernel to 0xf00000 has no practical reason.
Starting it from the u-boot's highest possible end address
(2MB counting from 0x0) makes more sense.
Tested by: kevlo
Depending on u-boot's flavor some boards have their SoC registers
base address configured to 0xD0000000 and other to 0xF1000000.
U-boot is passing currently set value via CP15 register.
In order to create proper mapping for SoC registers and allow further
successful initialization it is necessary to replace fdt_immr_pa with
the real value and eventually fix-up device tree blob.
Tested by: kevlo
Armada XP initialization flow requires SoC registers to be
mapped very early in order to configure Snoop Filter for SMP.
Additional mapping in locore.S is redundant as proper mapping is
made in pmap_devmap_bootstrap() prior to calling cpu_setup() which
configures the Snoop Filter.
For secondaru CPUs it is better to pass VA of the SoC
registers defined in MV_BASE and PA consistent with the value
in the Device Tree.
Tested by: kevlo
1. missing explicit includes for string.h, stdio.h, etc
2. missing explicit declaration for some common functions
I have been unable to contact the upstream maintainer for this patch,
http://www.inner.net/opie appears to be the source of truth but it
unreachable
The ng_create_one() and ng_mkpeer() functions in network.subr are
now not used anywhere, but I left them, since they can be useful
in future in netgraph scripting.
Submitted by: pluknet
1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture
Specification. The Extended Context and PASIDs from the rev. 2.2 are
not supported, but I am not aware of any released hardware which
implements them. Code does not use queued invalidation, see comments
for the reason, and does not provide interrupt remapping services.
Code implements the management of the guest address space per domain
and allows to establish and tear down arbitrary mappings, but not
partial unmapping. The superpages are created as needed, but not
promoted. Faults are recorded, fault records could be obtained
programmatically, and printed on the console.
Implement the busdma(9) using DMARs. This busdma backend avoids
bouncing and provides security against misbehaving hardware and driver
bad programming, preventing leaks and corruption of the memory by wild
DMA accesses.
By default, the implementation is compiled into amd64 GENERIC kernel
but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is
written to work on i386, but testing there was low priority, and
driver is not enabled in GENERIC. Even with the DMAR turned on,
individual devices could be directed to use the bounce busdma with the
hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If
DMARs are capable of the pass-through translations, it is used,
otherwise, an identity-mapping page table is constructed.
The driver was tested on Xeon 5400/5500 chipset legacy machine,
Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4),
ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also
works with em(4) and igb(4), but there some fixes are needed for
drivers, which are not committed yet. Intel GPUs do not work with
DMAR (yet).
Many thanks to John Baldwin, who explained me the newbus integration;
Peter Holm, who did all testing and helped me to discover and
understand several incredible bugs; and to Jim Harris for the access
to the EDS and BWG and for listening when I have to explain my
findings to somebody.
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
it had no hooks. It has abused ifnet's if_afdata slot and actually
abused every subsystem it touched.
lagg(4) is a proper trunking solution at ifnet(9) layer.
ng_one2many(4) is a proper trunking solution in netgraph(4).
from if.h.
- Remove unnecessary includes and declarations from if.h
- Remove unnecessary includes and declarations from if_var.h [1]
- Mark some declarations that are about to be removed in near
future with comments, explaning why this declaration is still
necessary.
- Protect eventhandler declarations with #ifdef SYS_EVENTHANDLER_H.
Obtained from: bdeBSD [1]
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
bpf(4) and vlan(4) related event declarations to bpf.h and
if_vlan_var.h. To avoid dependency on eventhandler.h, protect
these declarations with ifdef SYS_EVENTHANDLER_H.
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
slightly unnerving.
In file included from ioctl.c:48:
/var/tmp/home/sbruno/bsd/head/tmp/usr/include/dev/lmc/if_lmc.h:939:13:
warning: no previous extern declaration for non-static variable 'ssi_cables'
[-Wmissing-variable-declarations]
const char *ssi_cables[] =
busdma implementations to coexist. Copy busdma_machdep.c to
busdma_bounce.c, which is still a single implementation of the busdma
interface on x86 for now. The busdma_machdep.c only contains common
and dispatch code.
Tested by: pho (as part of the larger patch)
Sponsored by: The FreeBSD Foundation
MFC after: 1 month