d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
05bcfef170
freebsd-nq/sys/conf/files.powerpc

211 lines
8.8 KiB
Plaintext
Raw Normal View History

The final commit for the first phase of PowerPC support. This adds the config stuff needed to build kernels. Reviewed by: obrien
2001-06-17 09:39:44 +00:00
# This file tells config what files go into building a kernel,
# files marked standard are always included.
#
# $FreeBSD$
#
# The long compile-with and dependency lines are required because of
# limitations in config: backslash-newline doesn't work in strings, and
# dependency lines other than the first are silently ignored.
#
#
Align.
2007-10-25 14:16:07 +00:00
font.h optional sc \
Sort.
2007-12-14 23:47:39 +00:00
compile-with "uudecode < /usr/share/syscons/fonts/${SC_DFLT_FONT}-8x16.fnt && file2c 'u_char dflt_font_16[16*256] = {' '};' < ${SC_DFLT_FONT}-8x16 > font.h && uudecode < /usr/share/syscons/fonts/${SC_DFLT_FONT}-8x14.fnt && file2c 'u_char dflt_font_14[14*256] = {' '};' < ${SC_DFLT_FONT}-8x14 >> font.h && uudecode < /usr/share/syscons/fonts/${SC_DFLT_FONT}-8x8.fnt && file2c 'u_char dflt_font_8[8*256] = {' '};' < ${SC_DFLT_FONT}-8x8 >> font.h" \
Add syscons files, and also generate a syscons font since Apple SVGA adapters don't have one available in their ROMs.
2004-01-21 05:19:59 +00:00
no-obj no-implicit-rule before-depend \
clean "font.h ${SC_DFLT_FONT}-8x14 ${SC_DFLT_FONT}-8x16 ${SC_DFLT_FONT}-8x8"
add glue for ath_hal MFC after: 1 month
2006-06-08 23:38:01 +00:00
#
Sort.
2007-12-14 23:47:39 +00:00
crypto/blowfish/bf_enc.c optional crypto | ipsec
crypto/des/des_enc.c optional crypto | ipsec | netsmb
Add support for the Apple Big Mac (BMAC) Ethernet controller, found on various Apple G3 models. Submitted by: Nathan Whitehorn
2008-06-07 22:58:32 +00:00
dev/bm/if_bm.c optional bm powermac
Add ADB support. This provides support for the external ADB bus on the PowerMac G3 as well as the internal ADB keyboard and mice in PowerBooks and iBooks. This also brings in Mac GPIO support, for which we should eventually have a better interface. Obtained from: NetBSD (CUDA and PMU drivers)
2008-10-26 19:37:38 +00:00
dev/adb/adb_bus.c optional adb
dev/adb/adb_kbd.c optional adb
dev/adb/adb_mouse.c optional adb
dev/adb/adb_hb_if.m optional adb
dev/adb/adb_if.m optional adb
Add a driver for the Apple Uninorth AGP host bridge found in all PowerPC Macintoshes with an AGP bus.
2010-10-31 18:27:05 +00:00
dev/agp/agp_apple.c optional agp powermac
Convert Freescale PowerPC platforms to FDT convention. The following systems are affected: - MPC8555CDS - MPC8572DS This overhaul covers the following major changes: - All integrated peripherals drivers for Freescale MPC85XX SoC, which are currently in the FreeBSD source tree are reworked and adjusted so they derive config data out of the device tree blob (instead of hard coded / tabelarized values). - This includes: LBC, PCI / PCI-Express, I2C, DS1553, OpenPIC, TSEC, SEC, QUICC, UART, CFI. - Thanks to the common FDT infrastrucutre (fdtbus, simplebus) we retire ocpbus(4) driver, which was based on hard-coded config data. Note that world for these platforms has to be built WITH_FDT. Reviewed by: imp Sponsored by: The FreeBSD Foundation
2010-07-11 21:08:29 +00:00
dev/cfi/cfi_bus_fdt.c optional cfi fdt
Add syscons files, and also generate a syscons font since Apple SVGA adapters don't have one available in their ROMs.
2004-01-21 05:19:59 +00:00
dev/fb/fb.c optional sc
Convert Freescale PowerPC platforms to FDT convention. The following systems are affected: - MPC8555CDS - MPC8572DS This overhaul covers the following major changes: - All integrated peripherals drivers for Freescale MPC85XX SoC, which are currently in the FreeBSD source tree are reworked and adjusted so they derive config data out of the device tree blob (instead of hard coded / tabelarized values). - This includes: LBC, PCI / PCI-Express, I2C, DS1553, OpenPIC, TSEC, SEC, QUICC, UART, CFI. - Thanks to the common FDT infrastrucutre (fdtbus, simplebus) we retire ocpbus(4) driver, which was based on hard-coded config data. Note that world for these platforms has to be built WITH_FDT. Reviewed by: imp Sponsored by: The FreeBSD Foundation
2010-07-11 21:08:29 +00:00
dev/fdt/fdt_powerpc.c optional fdt
MFP4: - Implement sampling modes and logging support in hwpmc(4). - Separate MI and MD parts of hwpmc(4) and allow sharing of PMC implementations across different architectures. Add support for P4 (EMT64) style PMCs to the amd64 code. - New pmcstat(8) options: -E (exit time counts) -W (counts every context switch), -R (print log file). - pmc(3) API changes, improve our ability to keep ABI compatibility in the future. Add more 'alias' names for commonly used events. - bug fixes & documentation.
2005-06-09 19:45:09 +00:00
dev/hwpmc/hwpmc_powerpc.c optional hwpmc
Add three new drivers for fan control and temperature reading on the PowerMac7,2. - The fcu driver lets us read and write the fan RPMs for all fans in the PowerMac7,2. This driver is PowerMac specific. - The ds1775 is a driver to read the temperature for the drive bay sensor. - The max6690 is another driver to read temperatures. Here it is used to read the inlet, the backside and the U3 heatsink temperature. An additional driver, the ad7417, will follow later. Thanks to nwhitehorn for guiding me through this driver development. Approved by: nwhitehorn (mentor)
2010-10-15 20:08:16 +00:00
dev/iicbus/ds1775.c optional ds1775 powermac
dev/iicbus/max6690.c optional max6690 powermac
Add syscons files, and also generate a syscons font since Apple SVGA adapters don't have one available in their ROMs.
2004-01-21 05:19:59 +00:00
dev/kbd/kbd.c optional sc
Add a memory-range interface to /dev/mem on PowerPC using PAT attributes. Unlike actual MTRR, this only controls the mapping attributes for subsequent mmap() of /dev/mem. Nonetheless, the support is sufficiently MTRR-like that Xorg can use it, which translates into an enormous increase in graphics performance on PowerPC. MFC after: 2 weeks
2010-10-03 16:02:53 +00:00
dev/mem/memutil.c optional mem
Convert Freescale PowerPC platforms to FDT convention. The following systems are affected: - MPC8555CDS - MPC8572DS This overhaul covers the following major changes: - All integrated peripherals drivers for Freescale MPC85XX SoC, which are currently in the FreeBSD source tree are reworked and adjusted so they derive config data out of the device tree blob (instead of hard coded / tabelarized values). - This includes: LBC, PCI / PCI-Express, I2C, DS1553, OpenPIC, TSEC, SEC, QUICC, UART, CFI. - Thanks to the common FDT infrastrucutre (fdtbus, simplebus) we retire ocpbus(4) driver, which was based on hard-coded config data. Note that world for these platforms has to be built WITH_FDT. Reviewed by: imp Sponsored by: The FreeBSD Foundation
2010-07-11 21:08:29 +00:00
dev/ofw/openfirm.c optional aim | fdt
dev/ofw/openfirmio.c optional aim | fdt
dev/ofw/ofw_bus_if.m optional aim | fdt
dev/ofw/ofw_if.m optional aim | fdt
dev/ofw/ofw_bus_subr.c optional aim | fdt
Make files under src/sys/powerpc/aim, as well as Open Firmware related files dependent upon option/cpu AIM. This is in preparation of adding support for Book-E (e500) support. Obtained from: Juniper, Semihalf
2007-12-16 01:02:47 +00:00
dev/ofw/ofw_console.c optional aim
dev/ofw/ofw_disk.c optional ofwd aim
Convert Freescale PowerPC platforms to FDT convention. The following systems are affected: - MPC8555CDS - MPC8572DS This overhaul covers the following major changes: - All integrated peripherals drivers for Freescale MPC85XX SoC, which are currently in the FreeBSD source tree are reworked and adjusted so they derive config data out of the device tree blob (instead of hard coded / tabelarized values). - This includes: LBC, PCI / PCI-Express, I2C, DS1553, OpenPIC, TSEC, SEC, QUICC, UART, CFI. - Thanks to the common FDT infrastrucutre (fdtbus, simplebus) we retire ocpbus(4) driver, which was based on hard-coded config data. Note that world for these platforms has to be built WITH_FDT. Reviewed by: imp Sponsored by: The FreeBSD Foundation
2010-07-11 21:08:29 +00:00
dev/ofw/ofw_fdt.c optional fdt
Import an Open Firmware I2C bus module. This attaches firmware device tree indicated I2C devices, and provides an ofw_bus interface for driver probing. This should be MI, but is currently provided only on PowerPC due to lack of sparc64 hardware with an I2C controller. Discussed on: freebsd-arch
2009-01-15 02:46:43 +00:00
dev/ofw/ofw_iicbus.c optional iicbus aim
MFppc64: Kernel sources for 64-bit PowerPC, along with build-system changes to keep 32-bit kernels compiling (build system changes for 64-bit kernels are coming later). Existing 32-bit PowerPC kernel configurations must be updated after this change to specify their architecture.
2010-07-13 05:32:19 +00:00
dev/ofw/ofw_standard.c optional aim powerpc
Sort.
2007-12-14 23:47:39 +00:00
dev/powermac_nvram/powermac_nvram.c optional powermac_nvram powermac
Convert Freescale PowerPC platforms to FDT convention. The following systems are affected: - MPC8555CDS - MPC8572DS This overhaul covers the following major changes: - All integrated peripherals drivers for Freescale MPC85XX SoC, which are currently in the FreeBSD source tree are reworked and adjusted so they derive config data out of the device tree blob (instead of hard coded / tabelarized values). - This includes: LBC, PCI / PCI-Express, I2C, DS1553, OpenPIC, TSEC, SEC, QUICC, UART, CFI. - Thanks to the common FDT infrastrucutre (fdtbus, simplebus) we retire ocpbus(4) driver, which was based on hard-coded config data. Note that world for these platforms has to be built WITH_FDT. Reviewed by: imp Sponsored by: The FreeBSD Foundation
2010-07-11 21:08:29 +00:00
dev/quicc/quicc_bfe_fdt.c optional quicc mpc85xx
Sort.
2007-12-14 23:47:39 +00:00
dev/scc/scc_bfe_macio.c optional scc powermac
Initial version of the sec(4) driver for the integrated security engine found in Freescale system-on-chip devices. The following algorithms and schemes are currently supported: - 3DES, AES, DES - MD5, SHA1, SHA256, SHA384, SHA512 Reviewed by: philip Obtained from: Freescale, Semihalf
2009-06-06 09:37:55 +00:00
dev/sec/sec.c optional sec mpc85xx
Add support for the I2S and davbus audio controllers found in Apple PowerPC hardware. Submitted by: Marco Trillo
2009-01-25 18:20:15 +00:00
dev/sound/macio/aoa.c optional snd_davbus | snd_ai2s powermac
dev/sound/macio/davbus.c optional snd_davbus powermac
dev/sound/macio/i2s.c optional snd_ai2s powermac
dev/sound/macio/snapper.c optional snd_ai2s iicbus powermac
dev/sound/macio/tumbler.c optional snd_ai2s iicbus powermac
Add syscons files, and also generate a syscons font since Apple SVGA adapters don't have one available in their ROMs.
2004-01-21 05:19:59 +00:00
dev/syscons/scgfbrndr.c optional sc
Replace syscons terminal renderer by a new renderer that uses libteken. Some time ago I started working on a library called libteken, which is terminal emulator. It does not buffer any screen contents, but only keeps terminal state, such as cursor position, attributes, etc. It should implement all escape sequences that are implemented by the cons25 terminal emulator, but also a fair amount of sequences that are present in VT100 and xterm. A lot of random notes, which could be of interest to users/developers: - Even though I'm leaving the terminal type set to `cons25', users can do experiments with placing `xterm-color' in /etc/ttys. Because we only implement a subset of features of xterm, this may cause artifacts. We should consider extending libteken, because in my opinion xterm is the way to go. Some missing features: - Keypad application mode (DECKPAM) - Character sets (SCS) - libteken is filled with a fair amount of assertions, but unfortunately we cannot go into the debugger anymore if we fail them. I've done development of this library almost entirely in userspace. In sys/dev/syscons/teken there are two applications that can be helpful when debugging the code: - teken_demo: a terminal emulator that can be started from a regular xterm that emulates a terminal using libteken. This application can be very useful to debug any rendering issues. - teken_stress: a stress testing application that emulates random terminal output. libteken has literally survived multiple terabytes of random input. - libteken also includes support for UTF-8, but unfortunately our input layer and font renderer don't support this. If users want to experiment with UTF-8 support, they can enable `TEKEN_UTF8' in teken.h. If you recompile your kernel or the teken_demo application, you can hold some nice experiments. - I've left PC98 the way it is right now. The PC98 platform has a custom syscons renderer, which supports some form of localised input. Maybe we should port PC98 to libteken by the time syscons supports UTF-8? - I've removed the `dumb' terminal emulator. It has been broken for years. It hasn't survived the `struct proc' -> `struct thread' conversion. - To prevent confusion among people that want to hack on libteken: unlike syscons, the state machines that parse the escape sequences are machine generated. This means that if you want to add new escape sequences, you have to add an entry to the `sequences' file. This will cause new entries to be added to `teken_state.h'. - Any rendering artifacts that didn't occur prior to this commit are by accident. They should be reported to me, so I can fix them. Discussed on: current@, hackers@ Discussed with: philip (at 25C3)
2009-01-01 13:26:53 +00:00
dev/syscons/scterm-teken.c optional sc
Add syscons files, and also generate a syscons font since Apple SVGA adapters don't have one available in their ROMs.
2004-01-21 05:19:59 +00:00
dev/syscons/scvtb.c optional sc
Connect MPC85XX to the PowerPC build. The kernel config file is KERNCONF=MPC85XX, so the usual procedure applies: 1. make buildworld TARGET_ARCH=powerpc 2. make buildkernel TARGET_ARCH=powerpc TARGET_CPUTYPE=e500 KERNCONF=MPC85XX This default config uses kernel-level FPU emulation. For the soft-float world approach: 1. make buildworld TARGET_ARCH=powerpc TARGET_CPUTYPE=e500 2. disable FPU_EMU option in sys/powerpc/conf/MPC85XX 3. make buildkernel TARGET_ARCH=powerpc TARGET_CPUTYPE=e500 KERNCONF=MPC85XX Approved by: cognet (mentor) MFp4: e500
2008-03-03 20:40:20 +00:00
dev/tsec/if_tsec.c optional tsec
Convert Freescale PowerPC platforms to FDT convention. The following systems are affected: - MPC8555CDS - MPC8572DS This overhaul covers the following major changes: - All integrated peripherals drivers for Freescale MPC85XX SoC, which are currently in the FreeBSD source tree are reworked and adjusted so they derive config data out of the device tree blob (instead of hard coded / tabelarized values). - This includes: LBC, PCI / PCI-Express, I2C, DS1553, OpenPIC, TSEC, SEC, QUICC, UART, CFI. - Thanks to the common FDT infrastrucutre (fdtbus, simplebus) we retire ocpbus(4) driver, which was based on hard-coded config data. Note that world for these platforms has to be built WITH_FDT. Reviewed by: imp Sponsored by: The FreeBSD Foundation
2010-07-11 21:08:29 +00:00
dev/tsec/if_tsec_fdt.c optional tsec fdt
dev/uart/uart_cpu_powerpc.c optional uart aim
Update PowerPC event timer code to use new event timers infrastructure. Reviewed by: nwitehorn Tested by: andreast H/W donated by: Gheorghe Ardelean
2010-09-11 04:45:51 +00:00
kern/kern_clocksource.c standard
Fix build for non-WITNESS case spotted by: Suleiman Souhlal <refugee@segfaulted.com>
2004-07-11 01:38:25 +00:00
kern/syscalls.c optional ktr
MFppc64: Kernel sources for 64-bit PowerPC, along with build-system changes to keep 32-bit kernels compiling (build system changes for 64-bit kernels are coming later). Existing 32-bit PowerPC kernel configurations must be updated after this change to specify their architecture.
2010-07-13 05:32:19 +00:00
libkern/ashldi3.c optional powerpc
libkern/ashrdi3.c optional powerpc
Sort.
2007-12-14 23:47:39 +00:00
libkern/bcmp.c standard
MFppc64: Kernel sources for 64-bit PowerPC, along with build-system changes to keep 32-bit kernels compiling (build system changes for 64-bit kernels are coming later). Existing 32-bit PowerPC kernel configurations must be updated after this change to specify their architecture.
2010-07-13 05:32:19 +00:00
libkern/cmpdi2.c optional powerpc
libkern/divdi3.c optional powerpc
Sort.
2007-12-14 23:47:39 +00:00
libkern/ffs.c standard
libkern/ffsl.c standard
libkern/fls.c standard
libkern/flsl.c standard
MFppc64: Kernel sources for 64-bit PowerPC, along with build-system changes to keep 32-bit kernels compiling (build system changes for 64-bit kernels are coming later). Existing 32-bit PowerPC kernel configurations must be updated after this change to specify their architecture.
2010-07-13 05:32:19 +00:00
libkern/lshrdi3.c optional powerpc
Convert Freescale PowerPC platforms to FDT convention. The following systems are affected: - MPC8555CDS - MPC8572DS This overhaul covers the following major changes: - All integrated peripherals drivers for Freescale MPC85XX SoC, which are currently in the FreeBSD source tree are reworked and adjusted so they derive config data out of the device tree blob (instead of hard coded / tabelarized values). - This includes: LBC, PCI / PCI-Express, I2C, DS1553, OpenPIC, TSEC, SEC, QUICC, UART, CFI. - Thanks to the common FDT infrastrucutre (fdtbus, simplebus) we retire ocpbus(4) driver, which was based on hard-coded config data. Note that world for these platforms has to be built WITH_FDT. Reviewed by: imp Sponsored by: The FreeBSD Foundation
2010-07-11 21:08:29 +00:00
libkern/memchr.c optional fdt
Add memmove() to the kernel, making the kernel compile with Clang. When copying big structures, LLVM generates calls to memmove(), because it may not be able to figure out whether structures overlap. This caused linker errors to occur. memmove() is now implemented using bcopy(). Ideally it would be the other way around, but that can be solved in the future. On ARM we don't do add anything, because it already has memmove(). Discussed on: arch@ Reviewed by: rdivacky
2009-02-28 16:21:25 +00:00
libkern/memmove.c standard
Sort.
2007-12-14 23:47:39 +00:00
libkern/memset.c standard
MFppc64: Kernel sources for 64-bit PowerPC, along with build-system changes to keep 32-bit kernels compiling (build system changes for 64-bit kernels are coming later). Existing 32-bit PowerPC kernel configurations must be updated after this change to specify their architecture.
2010-07-13 05:32:19 +00:00
libkern/moddi3.c optional powerpc
libkern/qdivrem.c optional powerpc
libkern/ucmpdi2.c optional powerpc
libkern/udivdi3.c optional powerpc
libkern/umoddi3.c optional powerpc
Make files under src/sys/powerpc/aim, as well as Open Firmware related files dependent upon option/cpu AIM. This is in preparation of adding support for Book-E (e500) support. Obtained from: Juniper, Semihalf
2007-12-16 01:02:47 +00:00
powerpc/aim/clock.c optional aim
powerpc/aim/copyinout.c optional aim
powerpc/aim/interrupt.c optional aim
powerpc/aim/locore.S optional aim no-obj
powerpc/aim/machdep.c optional aim
MFppc64: Kernel sources for 64-bit PowerPC, along with build-system changes to keep 32-bit kernels compiling (build system changes for 64-bit kernels are coming later). Existing 32-bit PowerPC kernel configurations must be updated after this change to specify their architecture.
2010-07-13 05:32:19 +00:00
powerpc/aim/mmu_oea.c optional aim powerpc
Add support for 64-bit PowerPC CPUs operating in the 64-bit bridge mode provided, for example, on the PowerPC 970 (G5), as well as on related CPUs like the POWER3 and POWER4. This also adds support for various built-in hardware found on Apple G5 hardware (e.g. the IBM CPC925 northbridge). Reviewed by: grehan
2009-04-04 00:22:44 +00:00
powerpc/aim/mmu_oea64.c optional aim
Add an abstraction layer to the 64-bit AIM MMU's page table manipulation logic to support modifying the page table through a hypervisor. This uses KOBJ inheritance to provide subclasses of the base 64-bit AIM MMU class with additional methods for page table manipulation. Many thanks to Peter Grehan for suggesting this design and implementing the MMU KOBJ inheritance mechanism.
2010-12-04 02:42:52 +00:00
powerpc/aim/moea64_if.m optional aim
powerpc/aim/moea64_native.c optional aim
MFp4: SMP support
2008-04-27 22:33:43 +00:00
powerpc/aim/mp_cpudep.c optional aim smp
Make files under src/sys/powerpc/aim, as well as Open Firmware related files dependent upon option/cpu AIM. This is in preparation of adding support for Book-E (e500) support. Obtained from: Juniper, Semihalf
2007-12-16 01:02:47 +00:00
powerpc/aim/nexus.c optional aim
powerpc/aim/ofwmagic.S optional aim
MFppc64: Kernel sources for 64-bit PowerPC, along with build-system changes to keep 32-bit kernels compiling (build system changes for 64-bit kernels are coming later). Existing 32-bit PowerPC kernel configurations must be updated after this change to specify their architecture.
2010-07-13 05:32:19 +00:00
powerpc/aim/slb.c optional aim powerpc64
powerpc/aim/swtch32.S optional aim powerpc
powerpc/aim/swtch64.S optional aim powerpc64
Make files under src/sys/powerpc/aim, as well as Open Firmware related files dependent upon option/cpu AIM. This is in preparation of adding support for Book-E (e500) support. Obtained from: Juniper, Semihalf
2007-12-16 01:02:47 +00:00
powerpc/aim/trap.c optional aim
powerpc/aim/uma_machdep.c optional aim
powerpc/aim/vm_machdep.c optional aim
Connect MPC85XX to the PowerPC build. The kernel config file is KERNCONF=MPC85XX, so the usual procedure applies: 1. make buildworld TARGET_ARCH=powerpc 2. make buildkernel TARGET_ARCH=powerpc TARGET_CPUTYPE=e500 KERNCONF=MPC85XX This default config uses kernel-level FPU emulation. For the soft-float world approach: 1. make buildworld TARGET_ARCH=powerpc TARGET_CPUTYPE=e500 2. disable FPU_EMU option in sys/powerpc/conf/MPC85XX 3. make buildkernel TARGET_ARCH=powerpc TARGET_CPUTYPE=e500 KERNCONF=MPC85XX Approved by: cognet (mentor) MFp4: e500
2008-03-03 20:40:20 +00:00
powerpc/booke/clock.c optional e500
powerpc/booke/copyinout.c optional e500
powerpc/booke/interrupt.c optional e500
powerpc/booke/locore.S optional e500 no-obj
powerpc/booke/machdep.c optional e500
Initial support for SMP on PowerPC MPC85xx. Tested with Freescale dual-core MPC8572DS development system. Obtained from: Freescale, Semihalf
2009-05-21 11:43:37 +00:00
powerpc/booke/mp_cpudep.c optional e500 smp
Factor out platform dependent things unrelated to device drivers into a new platform module. These are probed in early boot, and have the responsibility of determining the layout of physical memory, determining the CPU timebase frequency, and handling the zoo of SMP mechanisms found on PowerPC. Reviewed by: marcel, raj Book-E parts by: raj
2009-05-14 00:34:26 +00:00
powerpc/booke/platform_bare.c optional mpc85xx
Connect MPC85XX to the PowerPC build. The kernel config file is KERNCONF=MPC85XX, so the usual procedure applies: 1. make buildworld TARGET_ARCH=powerpc 2. make buildkernel TARGET_ARCH=powerpc TARGET_CPUTYPE=e500 KERNCONF=MPC85XX This default config uses kernel-level FPU emulation. For the soft-float world approach: 1. make buildworld TARGET_ARCH=powerpc TARGET_CPUTYPE=e500 2. disable FPU_EMU option in sys/powerpc/conf/MPC85XX 3. make buildkernel TARGET_ARCH=powerpc TARGET_CPUTYPE=e500 KERNCONF=MPC85XX Approved by: cognet (mentor) MFp4: e500
2008-03-03 20:40:20 +00:00
powerpc/booke/pmap.c optional e500
powerpc/booke/swtch.S optional e500
powerpc/booke/trap.c optional e500
powerpc/booke/vm_machdep.c optional e500
Introduce support for cpufreq on PowerPC with the dynamic frequency switching capabilities of the MPC7447A and MPC7448.
2009-05-31 09:01:23 +00:00
powerpc/cpufreq/dfs.c optional cpufreq
Add cpufreq support on the PowerPC G5, along with a skeleton SMU driver in order to slew CPU voltage during frequency changes. The OpenBSD SMU driver was an extremely helpful reference for this.
2009-06-23 04:28:32 +00:00
powerpc/cpufreq/pcr.c optional cpufreq aim
FPU EMU is 32-bit only for now, so mark it as a powerpc-only feature. This fixes powerpc64 LINT.
2010-08-20 01:23:17 +00:00
powerpc/fpu/fpu_add.c optional fpu_emu powerpc
powerpc/fpu/fpu_compare.c optional fpu_emu powerpc
powerpc/fpu/fpu_div.c optional fpu_emu powerpc
powerpc/fpu/fpu_emu.c optional fpu_emu powerpc
powerpc/fpu/fpu_explode.c optional fpu_emu powerpc
powerpc/fpu/fpu_implode.c optional fpu_emu powerpc
powerpc/fpu/fpu_mul.c optional fpu_emu powerpc
powerpc/fpu/fpu_sqrt.c optional fpu_emu powerpc
powerpc/fpu/fpu_subr.c optional fpu_emu powerpc
Add support for the IBM Full-System Simulator (Mambo). This code has been developed against the 970 and Cell simulators.
2010-07-31 13:22:34 +00:00
powerpc/mambo/mambocall.S optional mambo
powerpc/mambo/mambo.c optional mambo
powerpc/mambo/mambo_console.c optional mambo
powerpc/mambo/mambo_disk.c optional mambo
powerpc/mambo/mambo_openpic.c optional mambo
Add suppport for ISA and ISA interrupts to make the ATA controller in the VIA southbridge functional in the CDS (Configurable Development System) for MPC85XX. The embedded USB controllers look operational but the interrupt steering is still wrong.
2009-04-24 03:51:11 +00:00
powerpc/mpc85xx/atpic.c optional mpc85xx isa
Convert Freescale PowerPC platforms to FDT convention. The following systems are affected: - MPC8555CDS - MPC8572DS This overhaul covers the following major changes: - All integrated peripherals drivers for Freescale MPC85XX SoC, which are currently in the FreeBSD source tree are reworked and adjusted so they derive config data out of the device tree blob (instead of hard coded / tabelarized values). - This includes: LBC, PCI / PCI-Express, I2C, DS1553, OpenPIC, TSEC, SEC, QUICC, UART, CFI. - Thanks to the common FDT infrastrucutre (fdtbus, simplebus) we retire ocpbus(4) driver, which was based on hard-coded config data. Note that world for these platforms has to be built WITH_FDT. Reviewed by: imp Sponsored by: The FreeBSD Foundation
2010-07-11 21:08:29 +00:00
powerpc/mpc85xx/ds1553_bus_fdt.c optional ds1553 fdt
DS1553 RTC module driver. On the MPC8555CDS system it hangs off of the LBC bus. Obtained from: Semihalf
2009-06-22 15:48:47 +00:00
powerpc/mpc85xx/ds1553_core.c optional ds1553
Convert Freescale PowerPC platforms to FDT convention. The following systems are affected: - MPC8555CDS - MPC8572DS This overhaul covers the following major changes: - All integrated peripherals drivers for Freescale MPC85XX SoC, which are currently in the FreeBSD source tree are reworked and adjusted so they derive config data out of the device tree blob (instead of hard coded / tabelarized values). - This includes: LBC, PCI / PCI-Express, I2C, DS1553, OpenPIC, TSEC, SEC, QUICC, UART, CFI. - Thanks to the common FDT infrastrucutre (fdtbus, simplebus) we retire ocpbus(4) driver, which was based on hard-coded config data. Note that world for these platforms has to be built WITH_FDT. Reviewed by: imp Sponsored by: The FreeBSD Foundation
2010-07-11 21:08:29 +00:00
powerpc/mpc85xx/i2c.c optional iicbus fdt
Keep file list sorted.
2009-06-22 15:53:41 +00:00
powerpc/mpc85xx/isa.c optional mpc85xx isa
Add a driver for the Local Bus Controller. Obtained from: Juniper Networks, Inc.
2008-10-25 06:03:40 +00:00
powerpc/mpc85xx/lbc.c optional mpc85xx
Introduce a dedicated file for MPC85xx-specific routines. Move cpu_reset() there, as it's not relevant to Book-E specification, but is an implementation detail, directly dependent on the given SoC version.
2008-04-26 17:57:29 +00:00
powerpc/mpc85xx/mpc85xx.c optional mpc85xx
Connect MPC85XX to the PowerPC build. The kernel config file is KERNCONF=MPC85XX, so the usual procedure applies: 1. make buildworld TARGET_ARCH=powerpc 2. make buildkernel TARGET_ARCH=powerpc TARGET_CPUTYPE=e500 KERNCONF=MPC85XX This default config uses kernel-level FPU emulation. For the soft-float world approach: 1. make buildworld TARGET_ARCH=powerpc TARGET_CPUTYPE=e500 2. disable FPU_EMU option in sys/powerpc/conf/MPC85XX 3. make buildkernel TARGET_ARCH=powerpc TARGET_CPUTYPE=e500 KERNCONF=MPC85XX Approved by: cognet (mentor) MFp4: e500
2008-03-03 20:40:20 +00:00
powerpc/mpc85xx/nexus.c optional mpc85xx
Convert Freescale PowerPC platforms to FDT convention. The following systems are affected: - MPC8555CDS - MPC8572DS This overhaul covers the following major changes: - All integrated peripherals drivers for Freescale MPC85XX SoC, which are currently in the FreeBSD source tree are reworked and adjusted so they derive config data out of the device tree blob (instead of hard coded / tabelarized values). - This includes: LBC, PCI / PCI-Express, I2C, DS1553, OpenPIC, TSEC, SEC, QUICC, UART, CFI. - Thanks to the common FDT infrastrucutre (fdtbus, simplebus) we retire ocpbus(4) driver, which was based on hard-coded config data. Note that world for these platforms has to be built WITH_FDT. Reviewed by: imp Sponsored by: The FreeBSD Foundation
2010-07-11 21:08:29 +00:00
powerpc/mpc85xx/openpic_fdt.c optional fdt
powerpc/mpc85xx/pci_fdt.c optional pci mpc85xx
Introduce support for cpufreq on PowerPC with the dynamic frequency switching capabilities of the MPC7447A and MPC7448.
2009-05-31 09:01:23 +00:00
powerpc/ofw/ofw_cpu.c optional aim
Remove use of a separate ofw_pmap on 32-bit CPUs. Many Open Firmware mappings need to end up in the kernel anyway since the kernel begins executing in OF context. Separating them adds needless complexity, especially since the powerpc64 and mmu_oea64 code gave up on it a long time ago. As a side effect, the PPC ofw_machdep code is no longer AIM-specific, so move it to powerpc/ofw.
2010-11-12 05:12:38 +00:00
powerpc/ofw/ofw_machdep.c optional aim
Convert PowerPC AIM PCI and nexus busses to standard OFW bus interface. This simplifies certain device attachments (Kauai ATA, for instance), and makes possible others on new hardware. On G5 systems, there are several otherwise standard PCI devices (Serverworks SATA) that will not allow their interrupt properties to be written, so this information must be supplied directly from Open Firmware. Obtained from: sparc64
2008-10-14 14:54:14 +00:00
powerpc/ofw/ofw_pcibus.c optional pci aim
Make files under src/sys/powerpc/aim, as well as Open Firmware related files dependent upon option/cpu AIM. This is in preparation of adding support for Book-E (e500) support. Obtained from: Juniper, Semihalf
2007-12-16 01:02:47 +00:00
powerpc/ofw/ofw_pcib_pci.c optional pci aim
Add an Open Firmware access module for real-mode OF accesses to the PowerPC build. This is required for the IBM Mambo simulator, as well as a variety of non-Apple PowerPC hardware.
2009-04-05 18:40:15 +00:00
powerpc/ofw/ofw_real.c optional aim
Make files under src/sys/powerpc/aim, as well as Open Firmware related files dependent upon option/cpu AIM. This is in preparation of adding support for Book-E (e500) support. Obtained from: Juniper, Semihalf
2007-12-16 01:02:47 +00:00
powerpc/ofw/ofw_syscons.c optional sc aim
Modularize the Macintosh built-in ATA along the lines of the rest of the ATA system as an optional atamacio device. PR: powerpc/133161 Submitted by: Bruce Cran
2009-04-04 17:05:17 +00:00
powerpc/powermac/ata_kauai.c optional powermac ata | powermac atamacio
powerpc/powermac/ata_macio.c optional powermac ata | powermac atamacio
powerpc/powermac/ata_dbdma.c optional powermac ata | powermac atamacio
Add cpufreq support on the PowerPC G5, along with a skeleton SMU driver in order to slew CPU voltage during frequency changes. The OpenBSD SMU driver was an extremely helpful reference for this.
2009-06-23 04:28:32 +00:00
powerpc/powermac/cuda.c optional powermac cuda
powerpc/powermac/cpcht.c optional powermac pci
Add support for Apple's Descriptor-Based DMA (DBDMA) engine. The DMA engine is usful to various existing drivers, such as ata(4) and scc(4), and is used bhy the soon to be added bm(4). Submitted by: Nathan Whitehorn
2008-06-07 21:56:48 +00:00
powerpc/powermac/dbdma.c optional powermac pci
Add three new drivers for fan control and temperature reading on the PowerMac7,2. - The fcu driver lets us read and write the fan RPMs for all fans in the PowerMac7,2. This driver is PowerMac specific. - The ds1775 is a driver to read the temperature for the drive bay sensor. - The max6690 is another driver to read temperatures. Here it is used to read the inlet, the backside and the U3 heatsink temperature. An additional driver, the ad7417, will follow later. Thanks to nwhitehorn for guiding me through this driver development. Approved by: nwhitehorn (mentor)
2010-10-15 20:08:16 +00:00
powerpc/powermac/fcu.c optional powermac fcu
Sort.
2007-12-14 23:47:39 +00:00
powerpc/powermac/grackle.c optional powermac pci
powerpc/powermac/hrowpic.c optional powermac pci
Driver for Apple Keywest I2C controllers found in MacIO ASICs. Used for power and thermal control, as well as GPIOs on Xserves and controlling sound codecs for Apple built-in audio. Submitted by: Marco Trillo Obtained from: NetBSD
2009-01-15 02:52:31 +00:00
powerpc/powermac/kiic.c optional powermac kiic
Add cpufreq support on the PowerPC G5, along with a skeleton SMU driver in order to slew CPU voltage during frequency changes. The OpenBSD SMU driver was an extremely helpful reference for this.
2009-06-23 04:28:32 +00:00
powerpc/powermac/macgpio.c optional powermac pci
Sort.
2007-12-14 23:47:39 +00:00
powerpc/powermac/macio.c optional powermac pci
powerpc/powermac/openpic_macio.c optional powermac pci
Restructure how reset and poweroff are handled on PowerPC systems, since the existing code was very platform specific, and broken for SMP systems trying to reboot from KDB. - Add a new PLATFORM_RESET() method to the platform KOBJ interface, and migrate existing reset functions into platform modules. - Modify the OF_reboot() routine to submit the request by hand to avoid the IPIs involved in the regular openfirmware() routine. This fixes reboot from KDB on SMP machines. - Move non-KDB reset and poweroff functions on the Powermac platform into the relevant power control drivers (cuda, pmu, smu), instead of using them through the Open Firmware backdoor. - Rename platform_chrp to platform_powermac since it has become increasingly Powermac specific. When we gain support for IBM systems, we will grow a new platform_chrp.
2010-08-31 15:27:46 +00:00
powerpc/powermac/platform_powermac.c optional powermac
Sort.
2007-12-14 23:47:39 +00:00
powerpc/powermac/pswitch.c optional powermac pswitch
Add ADB support. This provides support for the external ADB bus on the PowerMac G3 as well as the internal ADB keyboard and mice in PowerBooks and iBooks. This also brings in Mac GPIO support, for which we should eventually have a better interface. Obtained from: NetBSD (CUDA and PMU drivers)
2008-10-26 19:37:38 +00:00
powerpc/powermac/pmu.c optional powermac pmu
Add cpufreq support on the PowerPC G5, along with a skeleton SMU driver in order to slew CPU voltage during frequency changes. The OpenBSD SMU driver was an extremely helpful reference for this.
2009-06-23 04:28:32 +00:00
powerpc/powermac/smu.c optional powermac smu
Add a driver for the CPU temperature sensors attached over I2C on the PowerMac 11,2.
2010-06-05 17:51:37 +00:00
powerpc/powermac/smusat.c optional powermac smu
Add support for the U4 PCI-Express bridge chipset used in late-generation Powermac G5 systems. MSI and several other things are not presently supported. The U3/U4 internal device support portions of this change were contributed by Andreas Tobler. MFC after: 1 week
2010-05-16 15:18:25 +00:00
powerpc/powermac/uninorth.c optional powermac
powerpc/powermac/uninorthpci.c optional powermac pci
Introduce support for cpufreq on PowerPC with the dynamic frequency switching capabilities of the MPC7447A and MPC7448.
2009-05-31 09:01:23 +00:00
powerpc/powermac/vcoregpio.c optional powermac
Include altivec.c, missed on previous commit r188860. This should unbreak the build.
2009-02-21 02:15:08 +00:00
powerpc/powerpc/altivec.c optional aim
Convert remaining .s files to .S Approved by: benno
2003-01-22 01:34:37 +00:00
powerpc/powerpc/atomic.S standard
The final commit for the first phase of PowerPC support. This adds the config stuff needed to build kernels. Reviewed by: obrien
2001-06-17 09:39:44 +00:00
powerpc/powerpc/autoconf.c standard
powerpc/powerpc/bcopy.c standard
Redefine bus_space_tag_t on PowerPC from a 32-bit integral to a pointer to struct bus_space. The structure contains function pointers that do the actual bus space access. The reason for this change is that previously all bus space accesses were little endian (i.e. had an explicit byte-swap for multi-byte accesses), because all busses on Macs are little endian. The upcoming support for Book E, and in particular the E500 core, requires support for big-endian busses because all embedded peripherals are in the native byte-order. With this change, there's no distinction between I/O port space and memory mapped I/O. PowerPC doesn't have I/O port space. Busses assign tags based on the byte-order only. For that purpose, two global structures exist (bs_be_tag and bs_le_tag), of which the address can be taken to get a valid tag. Obtained from: Juniper, Semihalf
2007-12-19 18:00:50 +00:00
powerpc/powerpc/bus_machdep.c standard
1) Add busdma machdep code. 2) Add bus_pio.h and bus_memio.h (which do nothing). Submitted by: Peter Grehan <peterg@ptree32.com.au> (1)
2002-07-09 12:47:14 +00:00
powerpc/powerpc/busdma_machdep.c standard
The final commit for the first phase of PowerPC support. This adds the config stuff needed to build kernels. Reviewed by: obrien
2001-06-17 09:39:44 +00:00
powerpc/powerpc/copystr.c standard
Add cpu.c. This contains one exported function, cpu_setup(), which handles setup of and printing information about cpus. Obtained from: NetBSD (parts)
2003-02-05 12:09:53 +00:00
powerpc/powerpc/cpu.c standard
Sort.
2007-12-14 23:47:39 +00:00
powerpc/powerpc/db_disasm.c optional ddb
powerpc/powerpc/db_hwwatch.c optional ddb
powerpc/powerpc/db_interface.c optional ddb
powerpc/powerpc/db_trace.c optional ddb
PowerPC, meet kernel core dumps. The support is based on a generic dumper that creates an ELF core file and uses PMAP functions to scan and iterate over memory chunks, as well as handle memory mappings used during dumping. the PMAP layer can choose to return physical memory chunks or virtual memory chunks. For minidumps, the chunks should be virtual. The default MMU I/F implementation for the scan_md() method returns NULL. Thus, when a PMAP implementation does not implement the required methods, an empty core file is created. Here, empty means having an ELF header only. Obtained from: Juniper Networks
2009-04-04 02:12:37 +00:00
powerpc/powerpc/dump_machdep.c standard
MFppc64: Kernel sources for 64-bit PowerPC, along with build-system changes to keep 32-bit kernels compiling (build system changes for 64-bit kernels are coming later). Existing 32-bit PowerPC kernel configurations must be updated after this change to specify their architecture.
2010-07-13 05:32:19 +00:00
powerpc/powerpc/elf32_machdep.c optional powerpc | compat_freebsd32
powerpc/powerpc/elf64_machdep.c optional powerpc64
Unify ABI-related bits of the Book-E and AIM machdep routines (exec_setregs, etc.) in order to simplify the addition of 64-bit support, and possible future extension of the Book-E code to handle hard floating point and Altivec. MFC after: 1 month
2010-07-12 16:08:07 +00:00
powerpc/powerpc/exec_machdep.c standard
Connect MPC85XX to the PowerPC build. The kernel config file is KERNCONF=MPC85XX, so the usual procedure applies: 1. make buildworld TARGET_ARCH=powerpc 2. make buildkernel TARGET_ARCH=powerpc TARGET_CPUTYPE=e500 KERNCONF=MPC85XX This default config uses kernel-level FPU emulation. For the soft-float world approach: 1. make buildworld TARGET_ARCH=powerpc TARGET_CPUTYPE=e500 2. disable FPU_EMU option in sys/powerpc/conf/MPC85XX 3. make buildkernel TARGET_ARCH=powerpc TARGET_CPUTYPE=e500 KERNCONF=MPC85XX Approved by: cognet (mentor) MFp4: e500
2008-03-03 20:40:20 +00:00
powerpc/powerpc/fpu.c optional aim
The final commit for the first phase of PowerPC support. This adds the config stuff needed to build kernels. Reviewed by: obrien
2001-06-17 09:39:44 +00:00
powerpc/powerpc/fuswintr.c standard
Add skeletal support for GDB. In particular gdb_cpu_getreg() needs implementing to make GDB support usable.
2006-08-24 21:52:11 +00:00
powerpc/powerpc/gdb_machdep.c optional gdb
Add in_cksum.c
2002-06-29 09:50:20 +00:00
powerpc/powerpc/in_cksum.c optional inet
Add interrupt handling support code. I've tried to make this fairly platform-independant as some PowerPC platforms may not have openpic-style interrupt controllers. This may not have the best performance but it works for now.
2002-07-09 11:12:20 +00:00
powerpc/powerpc/intr_machdep.c standard
Provide a simple IOMMU framework on PowerPC, which is required to support PPC hypervisors.
2010-12-03 16:37:37 +00:00
powerpc/powerpc/iommu_if.m standard
Sort.
2007-12-14 23:47:39 +00:00
powerpc/powerpc/mem.c optional mem
Insert a layer of indirection to the pmap code, using a kobj for the interface. This allows run-time selection of MMU code, based on CPU-type detection, or tunable-overrides when testing new code. Pre-requisite for G5 support. conf/files.powerpc - remove pmap.c - add mmu_if.h, mmu_oea.c, pmap_dispatch.c powerpc/include/mmuvar.h - definitions for MMU implementations powerpc/include/pmap.h - remove pmap_pte_spill declaration - add pmap_mmu_install declaration - size the phys_avail array - pmap_bootstrapped is now global-scope powerpc/powerpc/machdep.c - call kobj_machdep_init early in the boot sequence to allow kobj usage prior to SI_SUB_LOCK - install the OEA pmap code. This will be moved to CPU-specific init code in the future. powerpc/powerpc/mmu_if.m - Kobj MMU interface definitions powerpc/powerpc/pmap_dispatch.c - central dispatch for pmap calls - contains the global mmu kobj and the routine to locate the the mmu implementation and init the kobj
2005-11-08 06:48:08 +00:00
powerpc/powerpc/mmu_if.m standard
mp_machdep.c is only conditional upon smp, not aim. If booke grows support for smp, mp_machdep.c needs to be included as well.
2008-04-30 00:50:50 +00:00
powerpc/powerpc/mp_machdep.c optional smp
Driver for OpenPIC compatible interrupt controllers. It's fairly PowerMac specific at the moment, but that should be fixable.
2002-07-09 11:26:10 +00:00
powerpc/powerpc/openpic.c standard
Add interrupt handling support code. I've tried to make this fairly platform-independant as some PowerPC platforms may not have openpic-style interrupt controllers. This may not have the best performance but it works for now.
2002-07-09 11:12:20 +00:00
powerpc/powerpc/pic_if.m standard
Insert a layer of indirection to the pmap code, using a kobj for the interface. This allows run-time selection of MMU code, based on CPU-type detection, or tunable-overrides when testing new code. Pre-requisite for G5 support. conf/files.powerpc - remove pmap.c - add mmu_if.h, mmu_oea.c, pmap_dispatch.c powerpc/include/mmuvar.h - definitions for MMU implementations powerpc/include/pmap.h - remove pmap_pte_spill declaration - add pmap_mmu_install declaration - size the phys_avail array - pmap_bootstrapped is now global-scope powerpc/powerpc/machdep.c - call kobj_machdep_init early in the boot sequence to allow kobj usage prior to SI_SUB_LOCK - install the OEA pmap code. This will be moved to CPU-specific init code in the future. powerpc/powerpc/mmu_if.m - Kobj MMU interface definitions powerpc/powerpc/pmap_dispatch.c - central dispatch for pmap calls - contains the global mmu kobj and the routine to locate the the mmu implementation and init the kobj
2005-11-08 06:48:08 +00:00
powerpc/powerpc/pmap_dispatch.c standard
Factor out platform dependent things unrelated to device drivers into a new platform module. These are probed in early boot, and have the responsibility of determining the layout of physical memory, determining the CPU timebase frequency, and handling the zoo of SMP mechanisms found on PowerPC. Reviewed by: marcel, raj Book-E parts by: raj
2009-05-14 00:34:26 +00:00
powerpc/powerpc/platform.c standard
powerpc/powerpc/platform_if.m standard
Add syscons files, and also generate a syscons font since Apple SVGA adapters don't have one available in their ROMs.
2004-01-21 05:19:59 +00:00
powerpc/powerpc/sc_machdep.c optional sc
Add setjmp (needed for DDB).
2002-07-10 12:26:17 +00:00
powerpc/powerpc/setjmp.S standard
MFppc64: Kernel sources for 64-bit PowerPC, along with build-system changes to keep 32-bit kernels compiling (build system changes for 64-bit kernels are coming later). Existing 32-bit PowerPC kernel configurations must be updated after this change to specify their architecture.
2010-07-13 05:32:19 +00:00
powerpc/powerpc/sigcode32.S optional powerpc | compat_freebsd32
powerpc/powerpc/sigcode64.S optional powerpc64
Break out stack(9) from ddb(4): - Introduce per-architecture stack_machdep.c to hold stack_save(9). - Introduce per-architecture machine/stack.h to capture any common definitions required between db_trace.c and stack_machdep.c. - Add new kernel option "options STACK"; we will build in stack(9) if it is defined, or also if "options DDB" is defined to provide compatibility with existing users of stack(9). Add new stack_save_td(9) function, which allows the capture of a stacktrace of another thread rather than the current thread, which the existing stack_save(9) was limited to. It requires that the thread be neither swapped out nor running, which is the responsibility of the consumer to enforce. Update stack(9) man page. Build tested: amd64, arm, i386, ia64, powerpc, sparc64, sun4v Runtime tested: amd64 (rwatson), arm (cognet), i386 (rwatson)
2007-12-02 20:40:35 +00:00
powerpc/powerpc/stack_machdep.c optional ddb | stack
The final commit for the first phase of PowerPC support. This adds the config stuff needed to build kernels. Reviewed by: obrien
2001-06-17 09:39:44 +00:00
powerpc/powerpc/suswintr.c standard
powerpc/powerpc/syncicache.c standard
powerpc/powerpc/sys_machdep.c standard
Add support for 64-bit PowerPC CPUs operating in the 64-bit bridge mode provided, for example, on the PowerPC 970 (G5), as well as on related CPUs like the POWER3 and POWER4. This also adds support for various built-in hardware found on Apple G5 hardware (e.g. the IBM CPC925 northbridge). Reviewed by: grehan
2009-04-04 00:22:44 +00:00
powerpc/powerpc/uio_machdep.c standard
Align.
2007-10-25 14:16:07 +00:00
powerpc/psim/iobus.c optional psim
powerpc/psim/ata_iobus.c optional ata psim
powerpc/psim/openpic_iobus.c optional psim
powerpc/psim/uart_iobus.c optional uart psim
MFppc64: Kernel sources for 64-bit PowerPC, along with build-system changes to keep 32-bit kernels compiling (build system changes for 64-bit kernels are coming later). Existing 32-bit PowerPC kernel configurations must be updated after this change to specify their architecture.
2010-07-13 05:32:19 +00:00
compat/freebsd32/freebsd32_ioctl.c optional compat_freebsd32
compat/freebsd32/freebsd32_misc.c optional compat_freebsd32
compat/freebsd32/freebsd32_syscalls.c optional compat_freebsd32
compat/freebsd32/freebsd32_sysent.c optional compat_freebsd32
kern/imgact_elf32.c optional compat_freebsd32
Reference in New Issue Copy Permalink