d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
0ab7046959
freebsd-nq/sys/dev/ppbus/ppi.c

627 lines
14 KiB
C
Raw Normal View History

New directory and drivers for Parallel Port Bus devices. Submitted by: Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1997-08-14 13:57:45 +00:00
/*-
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
* Copyright (c) 1997, 1998, 1999 Nicolas Souchu, Michael Smith
New directory and drivers for Parallel Port Bus devices. Submitted by: Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1997-08-14 13:57:45 +00:00
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*
*/
Use __FBSDID(). Also some minor style cleanups.
2003-08-24 17:55:58 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
#include "opt_ppb_1284.h"
New directory and drivers for Parallel Port Bus devices. Submitted by: Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1997-08-14 13:57:45 +00:00
#include <sys/param.h>
#include <sys/systm.h>
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
#include <sys/module.h>
#include <sys/bus.h>
New directory and drivers for Parallel Port Bus devices. Submitted by: Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1997-08-14 13:57:45 +00:00
#include <sys/conf.h>
#include <sys/kernel.h>
Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-(
2009-01-21 23:10:06 +00:00
#include <sys/lock.h>
#include <sys/sx.h>
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
#include <sys/uio.h>
Actually implement the internals of the 'ppi' device. It is now possible to control the various parallel port signals from user-space programs without having to resort to opening /dev/io directly.
1998-01-02 09:30:39 +00:00
#include <sys/fcntl.h>
New directory and drivers for Parallel Port Bus devices. Submitted by: Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1997-08-14 13:57:45 +00:00
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/rman.h>
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
New directory and drivers for Parallel Port Bus devices. Submitted by: Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1997-08-14 13:57:45 +00:00
#include <dev/ppbus/ppbconf.h>
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
#include <dev/ppbus/ppb_msq.h>
#ifdef PERIPH_1284
Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-(
2009-01-21 23:10:06 +00:00
#include <sys/malloc.h>
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
#include <dev/ppbus/ppb_1284.h>
#endif
Actually implement the internals of the 'ppi' device. It is now possible to control the various parallel port signals from user-space programs without having to resort to opening /dev/io directly.
1998-01-02 09:30:39 +00:00
#include <dev/ppbus/ppi.h>
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
#include "ppbus_if.h"
#include <dev/ppbus/ppbio.h>
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
#define BUFSIZE 512
New directory and drivers for Parallel Port Bus devices. Submitted by: Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1997-08-14 13:57:45 +00:00
Sync with ppbus-970815 from the author : - interrupt-driven printing now works (nlpt) - Rearrangement of bus-related functions into ppb_base/ppbconf - Addition of ieee1284 interface functions, preliminary parallel-port PnP support Submitted by: Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1997-08-16 14:05:38 +00:00
struct ppi_data {
Several cleanups to remove the need for explicit unit numbers and a few other fixes: - Add pointers back to device_t objects in softc structures instead of storing the unit and using devclass_get_device(). - Add 'lpbb', 'pcf', 'pps', and 'vpo' child devices to every 'ppbus' device instead of just the first one. - Store softc pointers in si_drv1 of character devices instead of pulling the unit number from the minor number and using devclass_get_softc() and devclass_get_device(). - Store the LP_BYPASS flag in si_drv2 instead of encoding it in the minor number. - Destroy character devices for lpt(4) when detaching the device. - Use bus_print_child_footer() instead of duplicating it in ppbus_print_child() and fix ppbus_print_child()'s return value. - Remove unused AVM ivar from ppbus. - Don't store the 'mode' ivar in the ppbus ivars since we always fetch it from the parent anyway. - Try to detach all the child devices before deleting them in ppbus_detach(). - Use pause() instead of a tsleep() on a dummy address when polling the ppbus. - Use if_printf() and device_printf() instead of explicit names with unit numbers. Silence on: current@
2008-10-21 18:30:10 +00:00
device_t ppi_device;
struct cdev *ppi_cdev;
Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-(
2009-01-21 23:10:06 +00:00
struct sx ppi_lock;
Actually implement the internals of the 'ppi' device. It is now possible to control the various parallel port signals from user-space programs without having to resort to opening /dev/io directly.
1998-01-02 09:30:39 +00:00
int ppi_flags;
#define HAVE_PPBUS (1<<0)
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
int ppi_mode; /* IEEE1284 mode */
char ppi_buffer[BUFSIZE];
Sync with ppbus-970815 from the author : - interrupt-driven printing now works (nlpt) - Rearrangement of bus-related functions into ppb_base/ppbconf - Addition of ieee1284 interface functions, preliminary parallel-port PnP support Submitted by: Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1997-08-16 14:05:38 +00:00
If PERIPH_1284 is not defined, don't even bother calling the BUS_*_INTR functions. If it is defined, check whether bus_alloc_resource has succeeded. If it hasn't, it is in polled mode. Mike Nowlin reports that this change makes the geek port (whatever _that_ is :-) work again on his machine. Submitted by: Mike Nowlin <mike@argos.org>
2000-05-07 20:46:49 +00:00
#ifdef PERIPH_1284
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
struct resource *intr_resource; /* interrupt resource */
void *intr_cookie; /* interrupt registration cookie */
If PERIPH_1284 is not defined, don't even bother calling the BUS_*_INTR functions. If it is defined, check whether bus_alloc_resource has succeeded. If it hasn't, it is in polled mode. Mike Nowlin reports that this change makes the geek port (whatever _that_ is :-) work again on his machine. Submitted by: Mike Nowlin <mike@argos.org>
2000-05-07 20:46:49 +00:00
#endif /* PERIPH_1284 */
Sync with ppbus-970815 from the author : - interrupt-driven printing now works (nlpt) - Rearrangement of bus-related functions into ppb_base/ppbconf - Addition of ieee1284 interface functions, preliminary parallel-port PnP support Submitted by: Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1997-08-16 14:05:38 +00:00
};
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
#define DEVTOSOFTC(dev) \
((struct ppi_data *)device_get_softc(dev))
New directory and drivers for Parallel Port Bus devices. Submitted by: Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1997-08-14 13:57:45 +00:00
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
static devclass_t ppi_devclass;
New directory and drivers for Parallel Port Bus devices. Submitted by: Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1997-08-14 13:57:45 +00:00
Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-(
2009-01-21 23:10:06 +00:00
#ifdef PERIPH_1284
static void ppiintr(void *arg);
#endif
New directory and drivers for Parallel Port Bus devices. Submitted by: Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1997-08-14 13:57:45 +00:00
static d_open_t ppiopen;
static d_close_t ppiclose;
static d_ioctl_t ppiioctl;
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
static d_write_t ppiwrite;
static d_read_t ppiread;
New directory and drivers for Parallel Port Bus devices. Submitted by: Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1997-08-14 13:57:45 +00:00
This commit should be a extensive NO-OP: Reformat and initialize correctly all "struct cdevsw". Initialize the d_maj and d_bmaj fields. The d_reset field was not removed, although it is never used. I used a program to do most of this, so all the files now use the same consistent format. Please keep it that way. Vinum and i4b not modified, patches emailed to respective authors.
1999-05-30 16:53:49 +00:00
static struct cdevsw ppi_cdevsw = {
Device megapatch 4/6: Introduce d_version field in struct cdevsw, this must always be initialized to D_VERSION. Flip sense of D_NOGIANT flag to D_NEEDGIANT, this involves removing four D_NOGIANT flags and adding 145 D_NEEDGIANT flags.
2004-02-21 21:10:55 +00:00
.d_version = D_VERSION,
Gigacommit to improve device-driver source compatibility between branches: Initialize struct cdevsw using C99 sparse initializtion and remove all initializations to default values. This patch is automatically generated and has been tested by compiling LINT with all the fields in struct cdevsw in reverse order on alpha, sparc64 and i386. Approved by: re(scottl)
2003-03-03 12:15:54 +00:00
.d_open = ppiopen,
.d_close = ppiclose,
.d_read = ppiread,
.d_write = ppiwrite,
.d_ioctl = ppiioctl,
.d_name = "ppi",
This commit should be a extensive NO-OP: Reformat and initialize correctly all "struct cdevsw". Initialize the d_maj and d_bmaj fields. The d_reset field was not removed, although it is never used. I used a program to do most of this, so all the files now use the same consistent format. Please keep it that way. Vinum and i4b not modified, patches emailed to respective authors.
1999-05-30 16:53:49 +00:00
};
New directory and drivers for Parallel Port Bus devices. Submitted by: Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1997-08-14 13:57:45 +00:00
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
#ifdef PERIPH_1284
static void
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
ppi_enable_intr(device_t ppidev)
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
{
char r;
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
device_t ppbus = device_get_parent(ppidev);
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
r = ppb_rctr(ppbus);
ppb_wctr(ppbus, r | IRQENABLE);
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
return;
}
static void
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
ppi_disable_intr(device_t ppidev)
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
{
char r;
Various whitespace and style fixes.
2008-11-16 17:42:02 +00:00
device_t ppbus = device_get_parent(ppidev);
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
r = ppb_rctr(ppbus);
ppb_wctr(ppbus, r & ~IRQENABLE);
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
return;
}
#endif /* PERIPH_1284 */
Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits.
2000-01-23 14:41:04 +00:00
static void
ppi_identify(driver_t *driver, device_t parent)
{
Prevent the strange situation that after each load/unload of a ppbus device, the device is probed multiple times (so each device is detected N times after unloading/loading the module N-1 times). The real fix is (quote Doug and Warner): > : In an ideal world, there should be some kind of BUS_UNIDENTIFY method > : which a driver could use to delete the devices it created in > : BUS_IDENTIFY. > > Or the bus would have a driver deleted routine that got called and it > would remove all instances of the devclass attached to it. Reviewed by: Doug Rabson & Warner Losh
2004-03-18 21:10:11 +00:00
device_t dev;
- Use bus_setup_intr() and bus_teardown_intr() to register device driver interrupt handlers rather than BUS_SETUP_INTR() and BUS_TEARDOWN_INTR(). Uses of the BUS_*() versions in the implementation of foo_intr methods in bus drivers were not changed. Mostly this just means that some drivers might start printing diagnostic messages like [FAST] when appropriate as well as honoring mpsafenet=0. - Fix two more of the ppbus drivers' identify routines to function correctly in the mythical case of a machine with more than one ppbus.
2006-02-22 18:16:26 +00:00
dev = device_find_child(parent, "ppi", -1);
Prevent the strange situation that after each load/unload of a ppbus device, the device is probed multiple times (so each device is detected N times after unloading/loading the module N-1 times). The real fix is (quote Doug and Warner): > : In an ideal world, there should be some kind of BUS_UNIDENTIFY method > : which a driver could use to delete the devices it created in > : BUS_IDENTIFY. > > Or the bus would have a driver deleted routine that got called and it > would remove all instances of the devclass attached to it. Reviewed by: Doug Rabson & Warner Losh
2004-03-18 21:10:11 +00:00
if (!dev)
BUS_ADD_CHILD(parent, 0, "ppi", -1);
Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits.
2000-01-23 14:41:04 +00:00
}
New directory and drivers for Parallel Port Bus devices. Submitted by: Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1997-08-14 13:57:45 +00:00
/*
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
* ppi_probe()
New directory and drivers for Parallel Port Bus devices. Submitted by: Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1997-08-14 13:57:45 +00:00
*/
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
static int
ppi_probe(device_t dev)
New directory and drivers for Parallel Port Bus devices. Submitted by: Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1997-08-14 13:57:45 +00:00
{
struct ppi_data *ppi;
Simplify cdevsw registration. The cdevsw_add() function now finds the major number(s) in the struct cdevsw passed to it. cdevsw_add_generic() is no longer needed, cdevsw_add() does the same thing. cdevsw_add() will print an message if the d_maj field looks bogus. Remove nblkdev and nchrdev variables. Most places they were used bogusly. Instead check a dev_t for validity by seeing if devsw() or bdevsw() returns NULL. Move bdevsw() and devsw() functions to kern/kern_conf.c Bump __FreeBSD_version to 400006 This commit removes: 72 bogus makedev() calls 26 bogus SYSINIT functions if_xe.c bogusly accessed cdevsw[], author/maintainer please fix. I4b and vinum not changed. Patches emailed to authors. LINT probably broken until they catch up.
1999-05-31 11:29:30 +00:00
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
/* probe is always ok */
device_set_desc(dev, "Parallel I/O");
ppi = DEVTOSOFTC(dev);
New directory and drivers for Parallel Port Bus devices. Submitted by: Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1997-08-14 13:57:45 +00:00
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
return (0);
New directory and drivers for Parallel Port Bus devices. Submitted by: Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1997-08-14 13:57:45 +00:00
}
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
/*
* ppi_attach()
*/
New directory and drivers for Parallel Port Bus devices. Submitted by: Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1997-08-14 13:57:45 +00:00
static int
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
ppi_attach(device_t dev)
New directory and drivers for Parallel Port Bus devices. Submitted by: Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1997-08-14 13:57:45 +00:00
{
Several cleanups to remove the need for explicit unit numbers and a few other fixes: - Add pointers back to device_t objects in softc structures instead of storing the unit and using devclass_get_device(). - Add 'lpbb', 'pcf', 'pps', and 'vpo' child devices to every 'ppbus' device instead of just the first one. - Store softc pointers in si_drv1 of character devices instead of pulling the unit number from the minor number and using devclass_get_softc() and devclass_get_device(). - Store the LP_BYPASS flag in si_drv2 instead of encoding it in the minor number. - Destroy character devices for lpt(4) when detaching the device. - Use bus_print_child_footer() instead of duplicating it in ppbus_print_child() and fix ppbus_print_child()'s return value. - Remove unused AVM ivar from ppbus. - Don't store the 'mode' ivar in the ppbus ivars since we always fetch it from the parent anyway. - Try to detach all the child devices before deleting them in ppbus_detach(). - Use pause() instead of a tsleep() on a dummy address when polling the ppbus. - Use if_printf() and device_printf() instead of explicit names with unit numbers. Silence on: current@
2008-10-21 18:30:10 +00:00
struct ppi_data *ppi = DEVTOSOFTC(dev);
If PERIPH_1284 is not defined, don't even bother calling the BUS_*_INTR functions. If it is defined, check whether bus_alloc_resource has succeeded. If it hasn't, it is in polled mode. Mike Nowlin reports that this change makes the geek port (whatever _that_ is :-) work again on his machine. Submitted by: Mike Nowlin <mike@argos.org>
2000-05-07 20:46:49 +00:00
#ifdef PERIPH_1284
Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-(
2009-01-21 23:10:06 +00:00
int error, rid = 0;
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
/* declare our interrupt handler */
Rework the handling of interrupt handlers for children of ppc and ppbus: - Retire IVARs for passing IRQs around. Instead, ppbus and ppc now allow child devices to access the interrupt by via a rid 0 IRQ resource using bus_alloc_resource_any(). - ppc creates its own interrupt event to manage the interrupt handlers of child devices. ppc does not allow child devices to use filters. It could allow this if needed, but none of the current drivers use them and it adds a good bit of complication. It uses intr_event_execute_handlers() to fire the child device interrupt handlers from its threaded interrupt handler. - Remove the ppbus_dummy_intr() hack. Now the ppc device always has an interrupt handler registered and we no longer bounce all the way up to nexus to manage adding/removing ppbus child interrupt handlers. Instead, the child handlers are added and removed to the private interrupt event in the ppc device.
2008-09-15 22:26:32 +00:00
ppi->intr_resource = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
RF_ACTIVE);
Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-(
2009-01-21 23:10:06 +00:00
if (ppi->intr_resource) {
/* register our interrupt handler */
error = bus_setup_intr(dev, ppi->intr_resource,
INTR_TYPE_TTY | INTR_MPSAFE, NULL, ppiintr, dev,
&ppi->intr_cookie);
if (error) {
bus_release_resource(dev, SYS_RES_IRQ, rid,
ppi->intr_resource);
device_printf(dev,
"Unable to register interrupt handler\n");
return (error);
}
}
If PERIPH_1284 is not defined, don't even bother calling the BUS_*_INTR functions. If it is defined, check whether bus_alloc_resource has succeeded. If it hasn't, it is in polled mode. Mike Nowlin reports that this change makes the geek port (whatever _that_ is :-) work again on his machine. Submitted by: Mike Nowlin <mike@argos.org>
2000-05-07 20:46:49 +00:00
#endif /* PERIPH_1284 */
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-(
2009-01-21 23:10:06 +00:00
sx_init(&ppi->ppi_lock, "ppi");
Several cleanups to remove the need for explicit unit numbers and a few other fixes: - Add pointers back to device_t objects in softc structures instead of storing the unit and using devclass_get_device(). - Add 'lpbb', 'pcf', 'pps', and 'vpo' child devices to every 'ppbus' device instead of just the first one. - Store softc pointers in si_drv1 of character devices instead of pulling the unit number from the minor number and using devclass_get_softc() and devclass_get_device(). - Store the LP_BYPASS flag in si_drv2 instead of encoding it in the minor number. - Destroy character devices for lpt(4) when detaching the device. - Use bus_print_child_footer() instead of duplicating it in ppbus_print_child() and fix ppbus_print_child()'s return value. - Remove unused AVM ivar from ppbus. - Don't store the 'mode' ivar in the ppbus ivars since we always fetch it from the parent anyway. - Try to detach all the child devices before deleting them in ppbus_detach(). - Use pause() instead of a tsleep() on a dummy address when polling the ppbus. - Use if_printf() and device_printf() instead of explicit names with unit numbers. Silence on: current@
2008-10-21 18:30:10 +00:00
ppi->ppi_cdev = make_dev(&ppi_cdevsw, device_get_unit(dev),
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
UID_ROOT, GID_WHEEL,
0600, "ppi%d", device_get_unit(dev));
Several cleanups to remove the need for explicit unit numbers and a few other fixes: - Add pointers back to device_t objects in softc structures instead of storing the unit and using devclass_get_device(). - Add 'lpbb', 'pcf', 'pps', and 'vpo' child devices to every 'ppbus' device instead of just the first one. - Store softc pointers in si_drv1 of character devices instead of pulling the unit number from the minor number and using devclass_get_softc() and devclass_get_device(). - Store the LP_BYPASS flag in si_drv2 instead of encoding it in the minor number. - Destroy character devices for lpt(4) when detaching the device. - Use bus_print_child_footer() instead of duplicating it in ppbus_print_child() and fix ppbus_print_child()'s return value. - Remove unused AVM ivar from ppbus. - Don't store the 'mode' ivar in the ppbus ivars since we always fetch it from the parent anyway. - Try to detach all the child devices before deleting them in ppbus_detach(). - Use pause() instead of a tsleep() on a dummy address when polling the ppbus. - Use if_printf() and device_printf() instead of explicit names with unit numbers. Silence on: current@
2008-10-21 18:30:10 +00:00
if (ppi->ppi_cdev == NULL) {
Fix build breakage. Pointy hat: jhb
2008-10-22 15:00:22 +00:00
device_printf(dev, "Failed to create character device\n");
Several cleanups to remove the need for explicit unit numbers and a few other fixes: - Add pointers back to device_t objects in softc structures instead of storing the unit and using devclass_get_device(). - Add 'lpbb', 'pcf', 'pps', and 'vpo' child devices to every 'ppbus' device instead of just the first one. - Store softc pointers in si_drv1 of character devices instead of pulling the unit number from the minor number and using devclass_get_softc() and devclass_get_device(). - Store the LP_BYPASS flag in si_drv2 instead of encoding it in the minor number. - Destroy character devices for lpt(4) when detaching the device. - Use bus_print_child_footer() instead of duplicating it in ppbus_print_child() and fix ppbus_print_child()'s return value. - Remove unused AVM ivar from ppbus. - Don't store the 'mode' ivar in the ppbus ivars since we always fetch it from the parent anyway. - Try to detach all the child devices before deleting them in ppbus_detach(). - Use pause() instead of a tsleep() on a dummy address when polling the ppbus. - Use if_printf() and device_printf() instead of explicit names with unit numbers. Silence on: current@
2008-10-21 18:30:10 +00:00
return (ENXIO);
}
ppi->ppi_cdev->si_drv1 = ppi;
ppi->ppi_device = dev;
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
return (0);
New directory and drivers for Parallel Port Bus devices. Submitted by: Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1997-08-14 13:57:45 +00:00
}
Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-(
2009-01-21 23:10:06 +00:00
static int
ppi_detach(device_t dev)
{
struct ppi_data *ppi = DEVTOSOFTC(dev);
destroy_dev(ppi->ppi_cdev);
#ifdef PERIPH_1284
if (ppi->intr_resource != NULL) {
bus_teardown_intr(dev, ppi->intr_resource, ppi->intr_cookie);
bus_release_resource(dev, SYS_RES_IRQ, 0, ppi->intr_resource);
}
#endif
sx_destroy(&ppi->ppi_lock);
return (0);
}
If PERIPH_1284 is not defined, don't even bother calling the BUS_*_INTR functions. If it is defined, check whether bus_alloc_resource has succeeded. If it hasn't, it is in polled mode. Mike Nowlin reports that this change makes the geek port (whatever _that_ is :-) work again on his machine. Submitted by: Mike Nowlin <mike@argos.org>
2000-05-07 20:46:49 +00:00
#ifdef PERIPH_1284
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
/*
* Cable
* -----
*
* Use an IEEE1284 compliant (DB25/DB25) cable with the following tricks:
*
* nStrobe <-> nAck 1 <-> 10
* nAutofd <-> Busy 11 <-> 14
* nSelectin <-> Select 17 <-> 13
* nInit <-> nFault 15 <-> 16
*
*/
New directory and drivers for Parallel Port Bus devices. Submitted by: Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1997-08-14 13:57:45 +00:00
static void
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
ppiintr(void *arg)
New directory and drivers for Parallel Port Bus devices. Submitted by: Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1997-08-14 13:57:45 +00:00
{
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
device_t ppidev = (device_t)arg;
Various whitespace and style fixes.
2008-11-16 17:42:02 +00:00
device_t ppbus = device_get_parent(ppidev);
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
struct ppi_data *ppi = DEVTOSOFTC(ppidev);
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-(
2009-01-21 23:10:06 +00:00
ppb_assert_locked(ppbus);
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
ppi_disable_intr(ppidev);
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
switch (ppb_1284_get_state(ppbus)) {
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
Fix typos, mostly s/ an / a / where appropriate and a few s/an/and/ Add FreeBSD Id tag where missing.
2002-12-30 21:18:15 +00:00
/* accept IEEE1284 negotiation then wakeup a waiting process to
* continue negotiation at process level */
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
case PPB_FORWARD_IDLE:
/* Event 1 */
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
if ((ppb_rstr(ppbus) & (SELECT | nBUSY)) ==
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
(SELECT | nBUSY)) {
Fix typos, mostly s/ an / a / where appropriate and a few s/an/and/ Add FreeBSD Id tag where missing.
2002-12-30 21:18:15 +00:00
/* IEEE1284 negotiation */
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
#ifdef DEBUG_1284
printf("N");
#endif
/* Event 2 - prepare for reading the ext. value */
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
ppb_wctr(ppbus, (PCD | STROBE | nINIT) & ~SELECTIN);
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
ppb_1284_set_state(ppbus, PPB_NEGOCIATION);
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
} else {
#ifdef DEBUG_1284
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
printf("0x%x", ppb_rstr(ppbus));
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
#endif
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
ppb_peripheral_terminate(ppbus, PPB_DONTWAIT);
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
break;
}
Fix typos, mostly s/ an / a / where appropriate and a few s/an/and/ Add FreeBSD Id tag where missing.
2002-12-30 21:18:15 +00:00
/* wake up any process waiting for negotiation from
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
* remote master host */
/* XXX should set a variable to warn the process about
* the interrupt */
wakeup(ppi);
break;
default:
#ifdef DEBUG_1284
Make this compile - missing ")";
2000-01-14 15:54:45 +00:00
printf("?%d", ppb_1284_get_state(ppbus));
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
#endif
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
ppb_1284_set_state(ppbus, PPB_FORWARD_IDLE);
ppb_set_mode(ppbus, PPB_COMPATIBLE);
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
break;
}
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
ppi_enable_intr(ppidev);
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
New directory and drivers for Parallel Port Bus devices. Submitted by: Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1997-08-14 13:57:45 +00:00
return;
}
If PERIPH_1284 is not defined, don't even bother calling the BUS_*_INTR functions. If it is defined, check whether bus_alloc_resource has succeeded. If it hasn't, it is in polled mode. Mike Nowlin reports that this change makes the geek port (whatever _that_ is :-) work again on his machine. Submitted by: Mike Nowlin <mike@argos.org>
2000-05-07 20:46:49 +00:00
#endif /* PERIPH_1284 */
New directory and drivers for Parallel Port Bus devices. Submitted by: Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1997-08-14 13:57:45 +00:00
static int
Do the dreaded s/dev_t/struct cdev */ Bump __FreeBSD_version accordingly.
2004-06-16 09:47:26 +00:00
ppiopen(struct cdev *dev, int flags, int fmt, struct thread *td)
New directory and drivers for Parallel Port Bus devices. Submitted by: Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1997-08-14 13:57:45 +00:00
{
Several cleanups to remove the need for explicit unit numbers and a few other fixes: - Add pointers back to device_t objects in softc structures instead of storing the unit and using devclass_get_device(). - Add 'lpbb', 'pcf', 'pps', and 'vpo' child devices to every 'ppbus' device instead of just the first one. - Store softc pointers in si_drv1 of character devices instead of pulling the unit number from the minor number and using devclass_get_softc() and devclass_get_device(). - Store the LP_BYPASS flag in si_drv2 instead of encoding it in the minor number. - Destroy character devices for lpt(4) when detaching the device. - Use bus_print_child_footer() instead of duplicating it in ppbus_print_child() and fix ppbus_print_child()'s return value. - Remove unused AVM ivar from ppbus. - Don't store the 'mode' ivar in the ppbus ivars since we always fetch it from the parent anyway. - Try to detach all the child devices before deleting them in ppbus_detach(). - Use pause() instead of a tsleep() on a dummy address when polling the ppbus. - Use if_printf() and device_printf() instead of explicit names with unit numbers. Silence on: current@
2008-10-21 18:30:10 +00:00
struct ppi_data *ppi = dev->si_drv1;
device_t ppidev = ppi->ppi_device;
Various whitespace and style fixes.
2008-11-16 17:42:02 +00:00
device_t ppbus = device_get_parent(ppidev);
Actually implement the internals of the 'ppi' device. It is now possible to control the various parallel port signals from user-space programs without having to resort to opening /dev/io directly.
1998-01-02 09:30:39 +00:00
int res;
Sync with ppbus-970815 from the author : - interrupt-driven printing now works (nlpt) - Rearrangement of bus-related functions into ppb_base/ppbconf - Addition of ieee1284 interface functions, preliminary parallel-port PnP support Submitted by: Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1997-08-16 14:05:38 +00:00
Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-(
2009-01-21 23:10:06 +00:00
sx_xlock(&ppi->ppi_lock);
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
if (!(ppi->ppi_flags & HAVE_PPBUS)) {
Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-(
2009-01-21 23:10:06 +00:00
ppb_lock(ppbus);
res = ppb_request_bus(ppbus, ppidev,
(flags & O_NONBLOCK) ? PPB_DONTWAIT : PPB_WAIT | PPB_INTR);
ppb_unlock(ppbus);
if (res) {
sx_xunlock(&ppi->ppi_lock);
Actually implement the internals of the 'ppi' device. It is now possible to control the various parallel port signals from user-space programs without having to resort to opening /dev/io directly.
1998-01-02 09:30:39 +00:00
return (res);
Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-(
2009-01-21 23:10:06 +00:00
}
Sync with ppbus-970815 from the author : - interrupt-driven printing now works (nlpt) - Rearrangement of bus-related functions into ppb_base/ppbconf - Addition of ieee1284 interface functions, preliminary parallel-port PnP support Submitted by: Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1997-08-16 14:05:38 +00:00
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
ppi->ppi_flags |= HAVE_PPBUS;
}
Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-(
2009-01-21 23:10:06 +00:00
sx_xunlock(&ppi->ppi_lock);
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
Actually implement the internals of the 'ppi' device. It is now possible to control the various parallel port signals from user-space programs without having to resort to opening /dev/io directly.
1998-01-02 09:30:39 +00:00
return (0);
New directory and drivers for Parallel Port Bus devices. Submitted by: Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1997-08-14 13:57:45 +00:00
}
static int
Do the dreaded s/dev_t/struct cdev */ Bump __FreeBSD_version accordingly.
2004-06-16 09:47:26 +00:00
ppiclose(struct cdev *dev, int flags, int fmt, struct thread *td)
New directory and drivers for Parallel Port Bus devices. Submitted by: Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1997-08-14 13:57:45 +00:00
{
Several cleanups to remove the need for explicit unit numbers and a few other fixes: - Add pointers back to device_t objects in softc structures instead of storing the unit and using devclass_get_device(). - Add 'lpbb', 'pcf', 'pps', and 'vpo' child devices to every 'ppbus' device instead of just the first one. - Store softc pointers in si_drv1 of character devices instead of pulling the unit number from the minor number and using devclass_get_softc() and devclass_get_device(). - Store the LP_BYPASS flag in si_drv2 instead of encoding it in the minor number. - Destroy character devices for lpt(4) when detaching the device. - Use bus_print_child_footer() instead of duplicating it in ppbus_print_child() and fix ppbus_print_child()'s return value. - Remove unused AVM ivar from ppbus. - Don't store the 'mode' ivar in the ppbus ivars since we always fetch it from the parent anyway. - Try to detach all the child devices before deleting them in ppbus_detach(). - Use pause() instead of a tsleep() on a dummy address when polling the ppbus. - Use if_printf() and device_printf() instead of explicit names with unit numbers. Silence on: current@
2008-10-21 18:30:10 +00:00
struct ppi_data *ppi = dev->si_drv1;
device_t ppidev = ppi->ppi_device;
Various whitespace and style fixes.
2008-11-16 17:42:02 +00:00
device_t ppbus = device_get_parent(ppidev);
Actually implement the internals of the 'ppi' device. It is now possible to control the various parallel port signals from user-space programs without having to resort to opening /dev/io directly.
1998-01-02 09:30:39 +00:00
Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-(
2009-01-21 23:10:06 +00:00
sx_xlock(&ppi->ppi_lock);
ppb_lock(ppbus);
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
#ifdef PERIPH_1284
Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-(
2009-01-21 23:10:06 +00:00
switch (ppb_1284_get_state(ppbus)) {
case PPB_PERIPHERAL_IDLE:
ppb_peripheral_terminate(ppbus, 0);
break;
case PPB_REVERSE_IDLE:
case PPB_EPP_IDLE:
case PPB_ECP_FORWARD_IDLE:
default:
ppb_1284_terminate(ppbus);
break;
}
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
#endif /* PERIPH_1284 */
Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-(
2009-01-21 23:10:06 +00:00
/* unregistration of interrupt forced by release */
ppb_release_bus(ppbus, ppidev);
ppb_unlock(ppbus);
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-(
2009-01-21 23:10:06 +00:00
ppi->ppi_flags &= ~HAVE_PPBUS;
sx_xunlock(&ppi->ppi_lock);
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
Actually implement the internals of the 'ppi' device. It is now possible to control the various parallel port signals from user-space programs without having to resort to opening /dev/io directly.
1998-01-02 09:30:39 +00:00
return (0);
New directory and drivers for Parallel Port Bus devices. Submitted by: Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1997-08-14 13:57:45 +00:00
}
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
/*
* ppiread()
*
* IEEE1284 compliant read.
*
Fix typos, mostly s/ an / a / where appropriate and a few s/an/and/ Add FreeBSD Id tag where missing.
2002-12-30 21:18:15 +00:00
* First, try negotiation to BYTE then NIBBLE mode
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
* If no data is available, wait for it otherwise transfer as much as possible
*/
static int
Do the dreaded s/dev_t/struct cdev */ Bump __FreeBSD_version accordingly.
2004-06-16 09:47:26 +00:00
ppiread(struct cdev *dev, struct uio *uio, int ioflag)
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
{
#ifdef PERIPH_1284
Several cleanups to remove the need for explicit unit numbers and a few other fixes: - Add pointers back to device_t objects in softc structures instead of storing the unit and using devclass_get_device(). - Add 'lpbb', 'pcf', 'pps', and 'vpo' child devices to every 'ppbus' device instead of just the first one. - Store softc pointers in si_drv1 of character devices instead of pulling the unit number from the minor number and using devclass_get_softc() and devclass_get_device(). - Store the LP_BYPASS flag in si_drv2 instead of encoding it in the minor number. - Destroy character devices for lpt(4) when detaching the device. - Use bus_print_child_footer() instead of duplicating it in ppbus_print_child() and fix ppbus_print_child()'s return value. - Remove unused AVM ivar from ppbus. - Don't store the 'mode' ivar in the ppbus ivars since we always fetch it from the parent anyway. - Try to detach all the child devices before deleting them in ppbus_detach(). - Use pause() instead of a tsleep() on a dummy address when polling the ppbus. - Use if_printf() and device_printf() instead of explicit names with unit numbers. Silence on: current@
2008-10-21 18:30:10 +00:00
struct ppi_data *ppi = dev->si_drv1;
device_t ppidev = ppi->ppi_device;
Various whitespace and style fixes.
2008-11-16 17:42:02 +00:00
device_t ppbus = device_get_parent(ppidev);
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
int len, error = 0;
Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-(
2009-01-21 23:10:06 +00:00
char *buffer;
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-(
2009-01-21 23:10:06 +00:00
buffer = malloc(BUFSIZE, M_DEVBUF, M_WAITOK);
ppb_lock(ppbus);
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
switch (ppb_1284_get_state(ppbus)) {
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
case PPB_PERIPHERAL_IDLE:
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
ppb_peripheral_terminate(ppbus, 0);
Replace various spelling with FALLTHROUGH which is lint()able
2002-08-25 13:23:09 +00:00
/* FALLTHROUGH */
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
case PPB_FORWARD_IDLE:
Fix typos, mostly s/ an / a / where appropriate and a few s/an/and/ Add FreeBSD Id tag where missing.
2002-12-30 21:18:15 +00:00
/* if can't negotiate NIBBLE mode then try BYTE mode,
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
* the peripheral may be a computer
*/
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
if ((ppb_1284_negociate(ppbus,
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
ppi->ppi_mode = PPB_NIBBLE, 0))) {
/* XXX Wait 2 seconds to let the remote host some
* time to terminate its interrupt
*/
Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-(
2009-01-21 23:10:06 +00:00
ppb_sleep(ppbus, ppi, PPBPRI, "ppiread", 2 * hz);
Various whitespace and style fixes.
2008-11-16 17:42:02 +00:00
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
if ((error = ppb_1284_negociate(ppbus,
Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-(
2009-01-21 23:10:06 +00:00
ppi->ppi_mode = PPB_BYTE, 0))) {
ppb_unlock(ppbus);
free(buffer, M_DEVBUF);
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
return (error);
Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-(
2009-01-21 23:10:06 +00:00
}
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
}
break;
case PPB_REVERSE_IDLE:
case PPB_EPP_IDLE:
case PPB_ECP_FORWARD_IDLE:
default:
break;
}
#ifdef DEBUG_1284
printf("N");
#endif
/* read data */
len = 0;
while (uio->uio_resid) {
Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-(
2009-01-21 23:10:06 +00:00
error = ppb_1284_read(ppbus, ppi->ppi_mode,
buffer, min(BUFSIZE, uio->uio_resid), &len);
ppb_unlock(ppbus);
if (error)
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
goto error;
if (!len)
goto error; /* no more data */
#ifdef DEBUG_1284
printf("d");
#endif
Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-(
2009-01-21 23:10:06 +00:00
if ((error = uiomove(buffer, len, uio)))
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
goto error;
Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-(
2009-01-21 23:10:06 +00:00
ppb_lock(ppbus);
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
}
Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-(
2009-01-21 23:10:06 +00:00
ppb_unlock(ppbus);
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
error:
Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-(
2009-01-21 23:10:06 +00:00
free(buffer, M_DEVBUF);
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
#else /* PERIPH_1284 */
int error = ENODEV;
#endif
return (error);
}
/*
* ppiwrite()
*
* IEEE1284 compliant write
*
* Actually, this is the peripheral side of a remote IEEE1284 read
*
Fix typos, mostly s/ an / a / where appropriate and a few s/an/and/ Add FreeBSD Id tag where missing.
2002-12-30 21:18:15 +00:00
* The first part of the negotiation (IEEE1284 device detection) is
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
* done at interrupt level, then the remaining is done by the writing
* process
*
Fix typos, mostly s/ an / a / where appropriate and a few s/an/and/ Add FreeBSD Id tag where missing.
2002-12-30 21:18:15 +00:00
* Once negotiation done, transfer data
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
*/
static int
Do the dreaded s/dev_t/struct cdev */ Bump __FreeBSD_version accordingly.
2004-06-16 09:47:26 +00:00
ppiwrite(struct cdev *dev, struct uio *uio, int ioflag)
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
{
#ifdef PERIPH_1284
Several cleanups to remove the need for explicit unit numbers and a few other fixes: - Add pointers back to device_t objects in softc structures instead of storing the unit and using devclass_get_device(). - Add 'lpbb', 'pcf', 'pps', and 'vpo' child devices to every 'ppbus' device instead of just the first one. - Store softc pointers in si_drv1 of character devices instead of pulling the unit number from the minor number and using devclass_get_softc() and devclass_get_device(). - Store the LP_BYPASS flag in si_drv2 instead of encoding it in the minor number. - Destroy character devices for lpt(4) when detaching the device. - Use bus_print_child_footer() instead of duplicating it in ppbus_print_child() and fix ppbus_print_child()'s return value. - Remove unused AVM ivar from ppbus. - Don't store the 'mode' ivar in the ppbus ivars since we always fetch it from the parent anyway. - Try to detach all the child devices before deleting them in ppbus_detach(). - Use pause() instead of a tsleep() on a dummy address when polling the ppbus. - Use if_printf() and device_printf() instead of explicit names with unit numbers. Silence on: current@
2008-10-21 18:30:10 +00:00
struct ppi_data *ppi = dev->si_drv1;
device_t ppidev = ppi->ppi_device;
Various whitespace and style fixes.
2008-11-16 17:42:02 +00:00
device_t ppbus = device_get_parent(ppidev);
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
int len, error = 0, sent;
Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-(
2009-01-21 23:10:06 +00:00
char *buffer;
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
#if 0
int ret;
#define ADDRESS MS_PARAM(0, 0, MS_TYP_PTR)
#define LENGTH MS_PARAM(0, 1, MS_TYP_INT)
struct ppb_microseq msq[] = {
{ MS_OP_PUT, { MS_UNKNOWN, MS_UNKNOWN, MS_UNKNOWN } },
MS_RET(0)
};
Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-(
2009-01-21 23:10:06 +00:00
buffer = malloc(BUFSIZE, M_DEVBUF, M_WAITOK);
ppb_lock(ppbus);
Fix typos, mostly s/ an / a / where appropriate and a few s/an/and/ Add FreeBSD Id tag where missing.
2002-12-30 21:18:15 +00:00
/* negotiate ECP mode */
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
if (ppb_1284_negociate(ppbus, PPB_ECP, 0)) {
Fix typos, mostly s/ an / a / where appropriate and a few s/an/and/ Add FreeBSD Id tag where missing.
2002-12-30 21:18:15 +00:00
printf("ppiwrite: ECP negotiation failed\n");
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
}
while (!error && (len = min(uio->uio_resid, BUFSIZE))) {
Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-(
2009-01-21 23:10:06 +00:00
ppb_unlock(ppbus);
uiomove(buffer, len, uio);
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-(
2009-01-21 23:10:06 +00:00
ppb_MS_init_msq(msq, 2, ADDRESS, buffer, LENGTH, len);
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-(
2009-01-21 23:10:06 +00:00
ppb_lock(ppbus);
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
error = ppb_MS_microseq(ppbus, msq, &ret);
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
}
Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-(
2009-01-21 23:10:06 +00:00
#else
buffer = malloc(BUFSIZE, M_DEVBUF, M_WAITOK);
ppb_lock(ppbus);
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
#endif
/* we have to be peripheral to be able to send data, so
* wait for the appropriate state
*/
ppi needs to use a bus method to get this rather than peering inside the 1284 stuff. Submitted by: Peter Wemm <peter@netplex.com.au>
2000-01-14 08:03:15 +00:00
if (ppb_1284_get_state(ppbus) < PPB_PERIPHERAL_NEGOCIATION)
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
ppb_1284_terminate(ppbus);
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
ppi needs to use a bus method to get this rather than peering inside the 1284 stuff. Submitted by: Peter Wemm <peter@netplex.com.au>
2000-01-14 08:03:15 +00:00
while (ppb_1284_get_state(ppbus) != PPB_PERIPHERAL_IDLE) {
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
/* XXX should check a variable before sleeping */
#ifdef DEBUG_1284
printf("s");
#endif
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
ppi_enable_intr(ppidev);
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
Fix typos, mostly s/ an / a / where appropriate and a few s/an/and/ Add FreeBSD Id tag where missing.
2002-12-30 21:18:15 +00:00
/* sleep until IEEE1284 negotiation starts */
Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-(
2009-01-21 23:10:06 +00:00
error = ppb_sleep(ppbus, ppi, PCATCH | PPBPRI, "ppiwrite", 0);
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
switch (error) {
case 0:
Fix typos, mostly s/ an / a / where appropriate and a few s/an/and/ Add FreeBSD Id tag where missing.
2002-12-30 21:18:15 +00:00
/* negotiate peripheral side with BYTE mode */
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
ppb_peripheral_negociate(ppbus, PPB_BYTE, 0);
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
break;
case EWOULDBLOCK:
break;
default:
goto error;
}
}
#ifdef DEBUG_1284
printf("N");
#endif
Fix typos, mostly s/ an / a / where appropriate and a few s/an/and/ Add FreeBSD Id tag where missing.
2002-12-30 21:18:15 +00:00
/* negotiation done, write bytes to master host */
Fix warnings in preparation for adding -Wall -Wcast-qual to the kernel compile
1999-01-27 21:50:00 +00:00
while ((len = min(uio->uio_resid, BUFSIZE)) != 0) {
Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-(
2009-01-21 23:10:06 +00:00
ppb_unlock(ppbus);
uiomove(buffer, len, uio);
ppb_lock(ppbus);
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
if ((error = byte_peripheral_write(ppbus,
Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-(
2009-01-21 23:10:06 +00:00
buffer, len, &sent)))
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
goto error;
#ifdef DEBUG_1284
printf("d");
#endif
}
error:
Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-(
2009-01-21 23:10:06 +00:00
ppb_unlock(ppbus);
free(buffer, M_DEVBUF);
Major ppbus commit with: + ECP parallel port chipset FIFO detection + DMA+FIFO parallel I/O handled as chipset specific + nlpt updated in order to use the above enhanced parallel I/O. Use 'lptcontrol -e' to use enhanced I/O + Various options documented in LINT + Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for an overview of the IEEE1284 standard + Detection of PnP parallel devices at boot + Read capability added to nlpt driver to get IEEE1284 compliant printer status with a simple 'cat /dev/lpt0' + IEEE1284 peripheral emulation added to BYTE mode. Two computers may dialog according to IEEE1284 signaling method. See PERIPH_1284 option and /sys/dev/ppbus/ppi.c All this code is supposed to provide basic functions for IEEE1284 programming. ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
#else /* PERIPH_1284 */
int error = ENODEV;
#endif
return (error);
}
New directory and drivers for Parallel Port Bus devices. Submitted by: Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1997-08-14 13:57:45 +00:00
static int
Do the dreaded s/dev_t/struct cdev */ Bump __FreeBSD_version accordingly.
2004-06-16 09:47:26 +00:00
ppiioctl(struct cdev *dev, u_long cmd, caddr_t data, int flags, struct thread *td)
New directory and drivers for Parallel Port Bus devices. Submitted by: Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1997-08-14 13:57:45 +00:00
{
Several cleanups to remove the need for explicit unit numbers and a few other fixes: - Add pointers back to device_t objects in softc structures instead of storing the unit and using devclass_get_device(). - Add 'lpbb', 'pcf', 'pps', and 'vpo' child devices to every 'ppbus' device instead of just the first one. - Store softc pointers in si_drv1 of character devices instead of pulling the unit number from the minor number and using devclass_get_softc() and devclass_get_device(). - Store the LP_BYPASS flag in si_drv2 instead of encoding it in the minor number. - Destroy character devices for lpt(4) when detaching the device. - Use bus_print_child_footer() instead of duplicating it in ppbus_print_child() and fix ppbus_print_child()'s return value. - Remove unused AVM ivar from ppbus. - Don't store the 'mode' ivar in the ppbus ivars since we always fetch it from the parent anyway. - Try to detach all the child devices before deleting them in ppbus_detach(). - Use pause() instead of a tsleep() on a dummy address when polling the ppbus. - Use if_printf() and device_printf() instead of explicit names with unit numbers. Silence on: current@
2008-10-21 18:30:10 +00:00
struct ppi_data *ppi = dev->si_drv1;
device_t ppidev = ppi->ppi_device;
Fix build breakage. Pointy hat: jhb
2008-10-22 15:00:22 +00:00
device_t ppbus = device_get_parent(ppidev);
Actually implement the internals of the 'ppi' device. It is now possible to control the various parallel port signals from user-space programs without having to resort to opening /dev/io directly.
1998-01-02 09:30:39 +00:00
int error = 0;
u_int8_t *val = (u_int8_t *)data;
Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-(
2009-01-21 23:10:06 +00:00
ppb_lock(ppbus);
Actually implement the internals of the 'ppi' device. It is now possible to control the various parallel port signals from user-space programs without having to resort to opening /dev/io directly.
1998-01-02 09:30:39 +00:00
switch (cmd) {
case PPIGDATA: /* get data register */
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
*val = ppb_rdtr(ppbus);
Actually implement the internals of the 'ppi' device. It is now possible to control the various parallel port signals from user-space programs without having to resort to opening /dev/io directly.
1998-01-02 09:30:39 +00:00
break;
case PPIGSTATUS: /* get status bits */
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
*val = ppb_rstr(ppbus);
Actually implement the internals of the 'ppi' device. It is now possible to control the various parallel port signals from user-space programs without having to resort to opening /dev/io directly.
1998-01-02 09:30:39 +00:00
break;
case PPIGCTRL: /* get control bits */
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
*val = ppb_rctr(ppbus);
Actually implement the internals of the 'ppi' device. It is now possible to control the various parallel port signals from user-space programs without having to resort to opening /dev/io directly.
1998-01-02 09:30:39 +00:00
break;
Distinguish EPP address/data register. Add EPP address register access to ppi. Change microseq offsets. Previously, offsets of the program counter where added to the index of the current microinstruction. Make them rely on the index of the next executed microinstruction. Suggested by: Luigi Rizzo <luigi@labinfo.iet.unipi.it>
1999-01-30 15:35:39 +00:00
case PPIGEPPD: /* get EPP data bits */
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
*val = ppb_repp_D(ppbus);
Actually implement the internals of the 'ppi' device. It is now possible to control the various parallel port signals from user-space programs without having to resort to opening /dev/io directly.
1998-01-02 09:30:39 +00:00
break;
case PPIGECR: /* get ECP bits */
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
*val = ppb_recr(ppbus);
Actually implement the internals of the 'ppi' device. It is now possible to control the various parallel port signals from user-space programs without having to resort to opening /dev/io directly.
1998-01-02 09:30:39 +00:00
break;
case PPIGFIFO: /* read FIFO */
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
*val = ppb_rfifo(ppbus);
Actually implement the internals of the 'ppi' device. It is now possible to control the various parallel port signals from user-space programs without having to resort to opening /dev/io directly.
1998-01-02 09:30:39 +00:00
break;
case PPISDATA: /* set data register */
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
ppb_wdtr(ppbus, *val);
Actually implement the internals of the 'ppi' device. It is now possible to control the various parallel port signals from user-space programs without having to resort to opening /dev/io directly.
1998-01-02 09:30:39 +00:00
break;
case PPISSTATUS: /* set status bits */
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
ppb_wstr(ppbus, *val);
Actually implement the internals of the 'ppi' device. It is now possible to control the various parallel port signals from user-space programs without having to resort to opening /dev/io directly.
1998-01-02 09:30:39 +00:00
break;
case PPISCTRL: /* set control bits */
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
ppb_wctr(ppbus, *val);
Actually implement the internals of the 'ppi' device. It is now possible to control the various parallel port signals from user-space programs without having to resort to opening /dev/io directly.
1998-01-02 09:30:39 +00:00
break;
Distinguish EPP address/data register. Add EPP address register access to ppi. Change microseq offsets. Previously, offsets of the program counter where added to the index of the current microinstruction. Make them rely on the index of the next executed microinstruction. Suggested by: Luigi Rizzo <luigi@labinfo.iet.unipi.it>
1999-01-30 15:35:39 +00:00
case PPISEPPD: /* set EPP data bits */
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
ppb_wepp_D(ppbus, *val);
Actually implement the internals of the 'ppi' device. It is now possible to control the various parallel port signals from user-space programs without having to resort to opening /dev/io directly.
1998-01-02 09:30:39 +00:00
break;
case PPISECR: /* set ECP bits */
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
ppb_wecr(ppbus, *val);
Actually implement the internals of the 'ppi' device. It is now possible to control the various parallel port signals from user-space programs without having to resort to opening /dev/io directly.
1998-01-02 09:30:39 +00:00
break;
case PPISFIFO: /* write FIFO */
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
ppb_wfifo(ppbus, *val);
Actually implement the internals of the 'ppi' device. It is now possible to control the various parallel port signals from user-space programs without having to resort to opening /dev/io directly.
1998-01-02 09:30:39 +00:00
break;
Distinguish EPP address/data register. Add EPP address register access to ppi. Change microseq offsets. Previously, offsets of the program counter where added to the index of the current microinstruction. Make them rely on the index of the next executed microinstruction. Suggested by: Luigi Rizzo <luigi@labinfo.iet.unipi.it>
1999-01-30 15:35:39 +00:00
case PPIGEPPA: /* get EPP address bits */
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
*val = ppb_repp_A(ppbus);
Distinguish EPP address/data register. Add EPP address register access to ppi. Change microseq offsets. Previously, offsets of the program counter where added to the index of the current microinstruction. Make them rely on the index of the next executed microinstruction. Suggested by: Luigi Rizzo <luigi@labinfo.iet.unipi.it>
1999-01-30 15:35:39 +00:00
break;
case PPISEPPA: /* set EPP address bits */
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
ppb_wepp_A(ppbus, *val);
Distinguish EPP address/data register. Add EPP address register access to ppi. Change microseq offsets. Previously, offsets of the program counter where added to the index of the current microinstruction. Make them rely on the index of the next executed microinstruction. Suggested by: Luigi Rizzo <luigi@labinfo.iet.unipi.it>
1999-01-30 15:35:39 +00:00
break;
Actually implement the internals of the 'ppi' device. It is now possible to control the various parallel port signals from user-space programs without having to resort to opening /dev/io directly.
1998-01-02 09:30:39 +00:00
default:
error = ENOTTY;
break;
}
Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-(
2009-01-21 23:10:06 +00:00
ppb_unlock(ppbus);
Various whitespace and style fixes.
2008-11-16 17:42:02 +00:00
Actually implement the internals of the 'ppi' device. It is now possible to control the various parallel port signals from user-space programs without having to resort to opening /dev/io directly.
1998-01-02 09:30:39 +00:00
return (error);
New directory and drivers for Parallel Port Bus devices. Submitted by: Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1997-08-14 13:57:45 +00:00
}
Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits.
2000-01-23 14:41:04 +00:00
static device_method_t ppi_methods[] = {
/* device interface */
DEVMETHOD(device_identify, ppi_identify),
DEVMETHOD(device_probe, ppi_probe),
DEVMETHOD(device_attach, ppi_attach),
Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-(
2009-01-21 23:10:06 +00:00
DEVMETHOD(device_detach, ppi_detach),
Port of ppbus standalone framework to the newbus system. Note1: the correct interrupt level is invoked correctly for each driver. For this purpose, drivers request the bus before being able to call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus core when drivers release it. Thus, when BUS_SETUP_INTR is called at ppbus driver level, ppbus checks that the caller owns the bus and stores the interrupt handler cookie (in order to unregister it later). Printing is impossible while plip link is up is still TRUE. vpo (ZIP driver) and lpt are make in such a way that using the ZIP and printing concurrently is permitted is also TRUE. Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET is now needed to force chipset detection. If set, the flags 0x40 still avoid detection at boot. Port of the pcf(4) driver to the newbus system (was previously directly connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits.
2000-01-23 14:41:04 +00:00
{ 0, 0 }
};
static driver_t ppi_driver = {
"ppi",
ppi_methods,
sizeof(struct ppi_data),
};
DRIVER_MODULE(ppi, ppbus, ppi_driver, ppi_devclass, 0, 0);
Add missing MODULE_DEPEND() so that ppbus.ko and these .ko's can be loaded dynamically.
2005-12-21 10:54:47 +00:00
MODULE_DEPEND(ppi, ppbus, 1, 1, 1);
Reference in New Issue Copy Permalink