freebsd-nq/sys/kern/subr_bus.c

2594 lines
54 KiB
C
Raw Normal View History

/*-
* Copyright (c) 1997,1998 Doug Rabson
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
1999-08-28 01:08:13 +00:00
* $FreeBSD$
*/
#include "opt_bus.h"
#include <sys/param.h>
#include <sys/queue.h>
#include <sys/malloc.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/kobj.h>
#include <sys/bus_private.h>
#include <sys/sysctl.h>
#include <sys/systm.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <machine/stdarg.h> /* for device_printf() */
2000-12-08 20:09:00 +00:00
static MALLOC_DEFINE(M_BUS, "bus", "Bus data structures");
#ifdef BUS_DEBUG
static int bus_debug = 1;
SYSCTL_INT(_debug, OID_AUTO, bus_debug, CTLFLAG_RW, &bus_debug, 0,
"Debug bus code");
#define PDEBUG(a) if (bus_debug) {printf(__FUNCTION__ ":%d: ", __LINE__), printf a, printf("\n");}
#define DEVICENAME(d) ((d)? device_get_name(d): "no device")
#define DRIVERNAME(d) ((d)? d->name : "no driver")
#define DEVCLANAME(d) ((d)? d->name : "no devclass")
/* Produce the indenting, indent*2 spaces plus a '.' ahead of that to
* prevent syslog from deleting initial spaces
*/
#define indentprintf(p) do { int iJ; printf("."); for (iJ=0; iJ<indent; iJ++) printf(" "); printf p ; } while (0)
static void print_device_short(device_t dev, int indent);
static void print_device(device_t dev, int indent);
void print_device_tree_short(device_t dev, int indent);
void print_device_tree(device_t dev, int indent);
static void print_driver_short(driver_t *driver, int indent);
static void print_driver(driver_t *driver, int indent);
static void print_driver_list(driver_list_t drivers, int indent);
static void print_devclass_short(devclass_t dc, int indent);
static void print_devclass(devclass_t dc, int indent);
void print_devclass_list_short(void);
void print_devclass_list(void);
#else
/* Make the compiler ignore the function calls */
#define PDEBUG(a) /* nop */
#define DEVICENAME(d) /* nop */
#define DRIVERNAME(d) /* nop */
#define DEVCLANAME(d) /* nop */
#define print_device_short(d,i) /* nop */
#define print_device(d,i) /* nop */
#define print_device_tree_short(d,i) /* nop */
#define print_device_tree(d,i) /* nop */
#define print_driver_short(d,i) /* nop */
#define print_driver(d,i) /* nop */
#define print_driver_list(d,i) /* nop */
#define print_devclass_short(d,i) /* nop */
#define print_devclass(d,i) /* nop */
#define print_devclass_list_short() /* nop */
#define print_devclass_list() /* nop */
#endif
extern char static_hints[];
extern int hintmode;
static int hints_loaded = 0;
TAILQ_HEAD(,device) bus_data_devices;
static int bus_data_generation = 1;
kobj_method_t null_methods[] = {
{ 0, 0 }
};
DEFINE_CLASS(null, null_methods, 0);
/*
* Devclass implementation
*/
static devclass_list_t devclasses = TAILQ_HEAD_INITIALIZER(devclasses);
static devclass_t
devclass_find_internal(const char *classname, int create)
{
devclass_t dc;
PDEBUG(("looking for %s", classname));
if (!classname)
return (NULL);
TAILQ_FOREACH(dc, &devclasses, link) {
if (!strcmp(dc->name, classname))
return (dc);
}
PDEBUG(("%s not found%s", classname, (create? ", creating": "")));
if (create) {
dc = malloc(sizeof(struct devclass) + strlen(classname) + 1,
M_BUS, M_NOWAIT|M_ZERO);
if (!dc)
return (NULL);
dc->name = (char*) (dc + 1);
strcpy(dc->name, classname);
dc->devices = NULL;
dc->maxunit = 0;
TAILQ_INIT(&dc->drivers);
TAILQ_INSERT_TAIL(&devclasses, dc, link);
bus_data_generation_update();
}
return (dc);
}
devclass_t
devclass_create(const char *classname)
{
return (devclass_find_internal(classname, TRUE));
}
devclass_t
devclass_find(const char *classname)
{
return (devclass_find_internal(classname, FALSE));
}
int
devclass_add_driver(devclass_t dc, driver_t *driver)
{
driverlink_t dl;
int i;
PDEBUG(("%s", DRIVERNAME(driver)));
dl = malloc(sizeof *dl, M_BUS, M_NOWAIT|M_ZERO);
if (!dl)
return (ENOMEM);
/*
* Compile the driver's methods. Also increase the reference count
* so that the class doesn't get freed when the last instance
* goes. This means we can safely use static methods and avoids a
* double-free in devclass_delete_driver.
*/
kobj_class_compile((kobj_class_t) driver);
/*
* Make sure the devclass which the driver is implementing exists.
*/
devclass_find_internal(driver->name, TRUE);
dl->driver = driver;
TAILQ_INSERT_TAIL(&dc->drivers, dl, link);
driver->refs++;
/*
* Call BUS_DRIVER_ADDED for any existing busses in this class.
*/
for (i = 0; i < dc->maxunit; i++)
if (dc->devices[i])
BUS_DRIVER_ADDED(dc->devices[i], driver);
bus_data_generation_update();
return (0);
}
int
devclass_delete_driver(devclass_t busclass, driver_t *driver)
{
devclass_t dc = devclass_find(driver->name);
driverlink_t dl;
device_t dev;
int i;
int error;
PDEBUG(("%s from devclass %s", driver->name, DEVCLANAME(busclass)));
if (!dc)
return (0);
/*
* Find the link structure in the bus' list of drivers.
*/
TAILQ_FOREACH(dl, &busclass->drivers, link) {
if (dl->driver == driver)
break;
}
if (!dl) {
PDEBUG(("%s not found in %s list", driver->name,
busclass->name));
return (ENOENT);
}
/*
* Disassociate from any devices. We iterate through all the
* devices in the devclass of the driver and detach any which are
* using the driver and which have a parent in the devclass which
* we are deleting from.
*
* Note that since a driver can be in multiple devclasses, we
* should not detach devices which are not children of devices in
* the affected devclass.
*/
for (i = 0; i < dc->maxunit; i++) {
if (dc->devices[i]) {
dev = dc->devices[i];
if (dev->driver == driver && dev->parent &&
dev->parent->devclass == busclass) {
if ((error = device_detach(dev)) != 0)
return (error);
device_set_driver(dev, NULL);
}
}
}
TAILQ_REMOVE(&busclass->drivers, dl, link);
free(dl, M_BUS);
driver->refs--;
if (driver->refs == 0)
kobj_class_free((kobj_class_t) driver);
bus_data_generation_update();
return (0);
}
static driverlink_t
devclass_find_driver_internal(devclass_t dc, const char *classname)
{
driverlink_t dl;
PDEBUG(("%s in devclass %s", classname, DEVCLANAME(dc)));
TAILQ_FOREACH(dl, &dc->drivers, link) {
if (!strcmp(dl->driver->name, classname))
return (dl);
}
PDEBUG(("not found"));
return (NULL);
}
driver_t *
devclass_find_driver(devclass_t dc, const char *classname)
{
driverlink_t dl;
dl = devclass_find_driver_internal(dc, classname);
if (dl)
return (dl->driver);
return (NULL);
}
const char *
devclass_get_name(devclass_t dc)
{
return (dc->name);
}
device_t
devclass_get_device(devclass_t dc, int unit)
{
if (dc == NULL || unit < 0 || unit >= dc->maxunit)
return (NULL);
return (dc->devices[unit]);
}
void *
devclass_get_softc(devclass_t dc, int unit)
{
device_t dev;
dev = devclass_get_device(dc, unit);
if (!dev)
return (NULL);
return (device_get_softc(dev));
}
int
devclass_get_devices(devclass_t dc, device_t **devlistp, int *devcountp)
{
int i;
int count;
device_t *list;
count = 0;
for (i = 0; i < dc->maxunit; i++)
if (dc->devices[i])
count++;
list = malloc(count * sizeof(device_t), M_TEMP, M_NOWAIT|M_ZERO);
if (!list)
return (ENOMEM);
count = 0;
for (i = 0; i < dc->maxunit; i++) {
if (dc->devices[i]) {
list[count] = dc->devices[i];
count++;
}
}
*devlistp = list;
*devcountp = count;
return (0);
}
int
devclass_get_maxunit(devclass_t dc)
{
return (dc->maxunit);
}
static int
devclass_alloc_unit(devclass_t dc, int *unitp)
{
int unit = *unitp;
PDEBUG(("unit %d in devclass %s", unit, DEVCLANAME(dc)));
/* If we were given a wired unit number, check for existing device */
/* XXX imp XXX */
if (unit != -1) {
if (unit >= 0 && unit < dc->maxunit &&
dc->devices[unit] != NULL) {
/* find the next available slot */
while (++unit < dc->maxunit &&
dc->devices[unit] != NULL)
continue;
if (bootverbose)
printf("%s-: %s%d already exists, using %s%d instead\n",
dc->name, dc->name, *unitp, dc->name, unit);
}
} else {
/* Unwired device, find the next available slot for it */
unit = 0;
while (unit < dc->maxunit && dc->devices[unit] != NULL)
unit++;
}
/*
* We've selected a unit beyond the length of the table, so let's
* extend the table to make room for all units up to and including
* this one.
*/
if (unit >= dc->maxunit) {
device_t *newlist;
int newsize;
newsize = roundup((unit + 1), MINALLOCSIZE / sizeof(device_t));
newlist = malloc(sizeof(device_t) * newsize, M_BUS, M_NOWAIT);
if (!newlist)
return (ENOMEM);
bcopy(dc->devices, newlist, sizeof(device_t) * dc->maxunit);
bzero(newlist + dc->maxunit,
sizeof(device_t) * (newsize - dc->maxunit));
if (dc->devices)
free(dc->devices, M_BUS);
dc->devices = newlist;
dc->maxunit = newsize;
}
PDEBUG(("now: unit %d in devclass %s", unit, DEVCLANAME(dc)));
*unitp = unit;
return (0);
}
static int
devclass_add_device(devclass_t dc, device_t dev)
{
int buflen, error;
PDEBUG(("%s in devclass %s", DEVICENAME(dev), DEVCLANAME(dc)));
buflen = strlen(dc->name) + 5;
dev->nameunit = malloc(buflen, M_BUS, M_NOWAIT|M_ZERO);
if (!dev->nameunit)
return (ENOMEM);
if ((error = devclass_alloc_unit(dc, &dev->unit)) != 0) {
free(dev->nameunit, M_BUS);
dev->nameunit = NULL;
return (error);
}
dc->devices[dev->unit] = dev;
dev->devclass = dc;
snprintf(dev->nameunit, buflen, "%s%d", dc->name, dev->unit);
return (0);
}
static int
devclass_delete_device(devclass_t dc, device_t dev)
{
if (!dc || !dev)
return (0);
PDEBUG(("%s in devclass %s", DEVICENAME(dev), DEVCLANAME(dc)));
if (dev->devclass != dc || dc->devices[dev->unit] != dev)
panic("devclass_delete_device: inconsistent device class");
dc->devices[dev->unit] = NULL;
if (dev->flags & DF_WILDCARD)
dev->unit = -1;
dev->devclass = NULL;
free(dev->nameunit, M_BUS);
dev->nameunit = NULL;
return (0);
}
static device_t
make_device(device_t parent, const char *name, int unit)
{
device_t dev;
devclass_t dc;
PDEBUG(("%s at %s as unit %d", name, DEVICENAME(parent), unit));
if (name) {
dc = devclass_find_internal(name, TRUE);
if (!dc) {
printf("make_device: can't find device class %s\n",
name);
return (NULL);
}
} else {
dc = NULL;
}
dev = malloc(sizeof(struct device), M_BUS, M_NOWAIT|M_ZERO);
if (!dev)
return (0);
dev->parent = parent;
TAILQ_INIT(&dev->children);
kobj_init((kobj_t) dev, &null_class);
dev->driver = NULL;
dev->devclass = NULL;
dev->unit = unit;
dev->nameunit = NULL;
dev->desc = NULL;
dev->busy = 0;
dev->devflags = 0;
dev->flags = DF_ENABLED;
dev->order = 0;
if (unit == -1)
dev->flags |= DF_WILDCARD;
if (name) {
dev->flags |= DF_FIXEDCLASS;
devclass_add_device(dc, dev);
}
dev->ivars = NULL;
dev->softc = NULL;
dev->state = DS_NOTPRESENT;
TAILQ_INSERT_TAIL(&bus_data_devices, dev, devlink);
bus_data_generation_update();
return (dev);
}
static int
device_print_child(device_t dev, device_t child)
{
int retval = 0;
if (device_is_alive(child))
retval += BUS_PRINT_CHILD(dev, child);
else
retval += device_printf(child, " not found\n");
return (retval);
}
device_t
device_add_child(device_t dev, const char *name, int unit)
{
return (device_add_child_ordered(dev, 0, name, unit));
}
device_t
device_add_child_ordered(device_t dev, int order, const char *name, int unit)
{
device_t child;
device_t place;
PDEBUG(("%s at %s with order %d as unit %d",
name, DEVICENAME(dev), order, unit));
child = make_device(dev, name, unit);
if (child == NULL)
return (child);
child->order = order;
TAILQ_FOREACH(place, &dev->children, link) {
if (place->order > order)
break;
}
if (place) {
/*
* The device 'place' is the first device whose order is
* greater than the new child.
*/
TAILQ_INSERT_BEFORE(place, child, link);
} else {
/*
* The new child's order is greater or equal to the order of
* any existing device. Add the child to the tail of the list.
*/
TAILQ_INSERT_TAIL(&dev->children, child, link);
}
bus_data_generation_update();
return (child);
}
int
device_delete_child(device_t dev, device_t child)
{
int error;
device_t grandchild;
PDEBUG(("%s from %s", DEVICENAME(child), DEVICENAME(dev)));
/* remove children first */
while ( (grandchild = TAILQ_FIRST(&child->children)) ) {
error = device_delete_child(child, grandchild);
if (error)
return (error);
}
if ((error = device_detach(child)) != 0)
return (error);
if (child->devclass)
devclass_delete_device(child->devclass, child);
TAILQ_REMOVE(&dev->children, child, link);
TAILQ_REMOVE(&bus_data_devices, child, devlink);
device_set_desc(child, NULL);
free(child, M_BUS);
bus_data_generation_update();
return (0);
}
/*
* Find only devices attached to this bus.
*/
device_t
device_find_child(device_t dev, const char *classname, int unit)
{
devclass_t dc;
device_t child;
dc = devclass_find(classname);
if (!dc)
return (NULL);
child = devclass_get_device(dc, unit);
if (child && child->parent == dev)
return (child);
return (NULL);
}
static driverlink_t
first_matching_driver(devclass_t dc, device_t dev)
{
if (dev->devclass)
return (devclass_find_driver_internal(dc, dev->devclass->name));
return (TAILQ_FIRST(&dc->drivers));
}
static driverlink_t
next_matching_driver(devclass_t dc, device_t dev, driverlink_t last)
{
if (dev->devclass) {
driverlink_t dl;
for (dl = TAILQ_NEXT(last, link); dl; dl = TAILQ_NEXT(dl, link))
if (!strcmp(dev->devclass->name, dl->driver->name))
return (dl);
return (NULL);
}
return (TAILQ_NEXT(last, link));
}
static int
device_probe_child(device_t dev, device_t child)
{
devclass_t dc;
driverlink_t best = 0;
driverlink_t dl;
int result, pri = 0;
int hasclass = (child->devclass != 0);
dc = dev->devclass;
if (!dc)
panic("device_probe_child: parent device has no devclass");
if (child->state == DS_ALIVE)
return (0);
for (dl = first_matching_driver(dc, child);
dl;
dl = next_matching_driver(dc, child, dl)) {
PDEBUG(("Trying %s", DRIVERNAME(dl->driver)));
device_set_driver(child, dl->driver);
if (!hasclass)
device_set_devclass(child, dl->driver->name);
result = DEVICE_PROBE(child);
if (!hasclass)
device_set_devclass(child, 0);
/*
* If the driver returns SUCCESS, there can be no higher match
* for this device.
*/
if (result == 0) {
best = dl;
pri = 0;
break;
}
/*
* The driver returned an error so it certainly doesn't match.
*/
if (result > 0) {
device_set_driver(child, 0);
continue;
}
/*
* A priority lower than SUCCESS, remember the best matching
* driver. Initialise the value of pri for the first match.
*/
if (best == 0 || result > pri) {
best = dl;
pri = result;
continue;
}
}
/*
* If we found a driver, change state and initialise the devclass.
*/
if (best) {
if (!child->devclass)
device_set_devclass(child, best->driver->name);
device_set_driver(child, best->driver);
if (pri < 0) {
/*
* A bit bogus. Call the probe method again to make
* sure that we have the right description.
*/
DEVICE_PROBE(child);
}
child->state = DS_ALIVE;
bus_data_generation_update();
return (0);
}
return (ENXIO);
}
device_t
device_get_parent(device_t dev)
{
return (dev->parent);
}
int
device_get_children(device_t dev, device_t **devlistp, int *devcountp)
{
int count;
device_t child;
device_t *list;
count = 0;
TAILQ_FOREACH(child, &dev->children, link) {
count++;
}
list = malloc(count * sizeof(device_t), M_TEMP, M_NOWAIT|M_ZERO);
if (!list)
return (ENOMEM);
count = 0;
TAILQ_FOREACH(child, &dev->children, link) {
list[count] = child;
count++;
}
*devlistp = list;
*devcountp = count;
return (0);
}
driver_t *
device_get_driver(device_t dev)
{
return (dev->driver);
}
devclass_t
device_get_devclass(device_t dev)
{
return (dev->devclass);
}
const char *
device_get_name(device_t dev)
{
if (dev->devclass)
return (devclass_get_name(dev->devclass));
return (NULL);
}
const char *
device_get_nameunit(device_t dev)
{
return (dev->nameunit);
}
int
device_get_unit(device_t dev)
{
return (dev->unit);
}
const char *
device_get_desc(device_t dev)
{
return (dev->desc);
}
u_int32_t
device_get_flags(device_t dev)
{
return (dev->devflags);
}
int
device_print_prettyname(device_t dev)
{
const char *name = device_get_name(dev);
if (name == 0)
return (printf("unknown: "));
return (printf("%s%d: ", name, device_get_unit(dev)));
}
int
device_printf(device_t dev, const char * fmt, ...)
{
va_list ap;
int retval;
retval = device_print_prettyname(dev);
va_start(ap, fmt);
retval += vprintf(fmt, ap);
va_end(ap);
return (retval);
}
static void
device_set_desc_internal(device_t dev, const char* desc, int copy)
{
if (dev->desc && (dev->flags & DF_DESCMALLOCED)) {
free(dev->desc, M_BUS);
dev->flags &= ~DF_DESCMALLOCED;
dev->desc = NULL;
}
if (copy && desc) {
dev->desc = malloc(strlen(desc) + 1, M_BUS, M_NOWAIT);
if (dev->desc) {
strcpy(dev->desc, desc);
dev->flags |= DF_DESCMALLOCED;
}
} else {
/* Avoid a -Wcast-qual warning */
dev->desc = (char *)(uintptr_t) desc;
}
bus_data_generation_update();
}
void
device_set_desc(device_t dev, const char* desc)
{
device_set_desc_internal(dev, desc, FALSE);
}
void
device_set_desc_copy(device_t dev, const char* desc)
{
device_set_desc_internal(dev, desc, TRUE);
}
void
device_set_flags(device_t dev, u_int32_t flags)
{
dev->devflags = flags;
}
void *
device_get_softc(device_t dev)
{
return (dev->softc);
}
void
device_set_softc(device_t dev, void *softc)
{
if (dev->softc && !(dev->flags & DF_EXTERNALSOFTC))
free(dev->softc, M_BUS);
dev->softc = softc;
if (dev->softc)
dev->flags |= DF_EXTERNALSOFTC;
else
dev->flags &= ~DF_EXTERNALSOFTC;
}
void *
device_get_ivars(device_t dev)
{
return (dev->ivars);
}
void
device_set_ivars(device_t dev, void * ivars)
{
if (!dev)
return;
dev->ivars = ivars;
return;
}
device_state_t
device_get_state(device_t dev)
{
return (dev->state);
}
void
device_enable(device_t dev)
{
dev->flags |= DF_ENABLED;
}
void
device_disable(device_t dev)
{
dev->flags &= ~DF_ENABLED;
}
void
device_busy(device_t dev)
{
if (dev->state < DS_ATTACHED)
panic("device_busy: called for unattached device");
if (dev->busy == 0 && dev->parent)
device_busy(dev->parent);
dev->busy++;
dev->state = DS_BUSY;
}
void
device_unbusy(device_t dev)
{
if (dev->state != DS_BUSY)
panic("device_unbusy: called for non-busy device");
dev->busy--;
if (dev->busy == 0) {
if (dev->parent)
device_unbusy(dev->parent);
dev->state = DS_ATTACHED;
}
}
void
device_quiet(device_t dev)
{
dev->flags |= DF_QUIET;
}
void
device_verbose(device_t dev)
{
dev->flags &= ~DF_QUIET;
}
int
device_is_quiet(device_t dev)
{
return ((dev->flags & DF_QUIET) != 0);
}
int
device_is_enabled(device_t dev)
{
return ((dev->flags & DF_ENABLED) != 0);
}
int
device_is_alive(device_t dev)
{
return (dev->state >= DS_ALIVE);
}
int
device_set_devclass(device_t dev, const char *classname)
{
devclass_t dc;
int error;
if (!classname) {
if (dev->devclass)
devclass_delete_device(dev->devclass, dev);
return (0);
}
if (dev->devclass) {
printf("device_set_devclass: device class already set\n");
return (EINVAL);
}
dc = devclass_find_internal(classname, TRUE);
if (!dc)
return (ENOMEM);
error = devclass_add_device(dc, dev);
bus_data_generation_update();
return (error);
}
int
device_set_driver(device_t dev, driver_t *driver)
{
if (dev->state >= DS_ATTACHED)
return (EBUSY);
if (dev->driver == driver)
return (0);
if (dev->softc && !(dev->flags & DF_EXTERNALSOFTC)) {
free(dev->softc, M_BUS);
dev->softc = NULL;
}
kobj_delete((kobj_t) dev, 0);
dev->driver = driver;
if (driver) {
kobj_init((kobj_t) dev, (kobj_class_t) driver);
if (!(dev->flags & DF_EXTERNALSOFTC)) {
dev->softc = malloc(driver->size, M_BUS,
M_NOWAIT | M_ZERO);
if (!dev->softc) {
kobj_init((kobj_t) dev, &null_class);
dev->driver = NULL;
return (ENOMEM);
}
}
} else {
kobj_init((kobj_t) dev, &null_class);
}
bus_data_generation_update();
return (0);
}
int
device_probe_and_attach(device_t dev)
{
device_t bus = dev->parent;
int error = 0;
int hasclass = (dev->devclass != 0);
if (dev->state >= DS_ALIVE)
return (0);
if (dev->flags & DF_ENABLED) {
error = device_probe_child(bus, dev);
if (!error) {
if (!device_is_quiet(dev))
device_print_child(bus, dev);
error = DEVICE_ATTACH(dev);
if (!error)
dev->state = DS_ATTACHED;
else {
printf("device_probe_and_attach: %s%d attach returned %d\n",
dev->driver->name, dev->unit, error);
/* Unset the class; set in device_probe_child */
if (!hasclass)
device_set_devclass(dev, 0);
device_set_driver(dev, NULL);
dev->state = DS_NOTPRESENT;
}
} else {
if (!(dev->flags & DF_DONENOMATCH)) {
BUS_PROBE_NOMATCH(bus, dev);
dev->flags |= DF_DONENOMATCH;
}
}
} else {
if (bootverbose) {
device_print_prettyname(dev);
printf("not probed (disabled)\n");
}
}
return (error);
}
int
device_detach(device_t dev)
{
int error;
PDEBUG(("%s", DEVICENAME(dev)));
if (dev->state == DS_BUSY)
return (EBUSY);
if (dev->state != DS_ATTACHED)
return (0);
if ((error = DEVICE_DETACH(dev)) != 0)
return (error);
device_printf(dev, "detached\n");
if (dev->parent)
BUS_CHILD_DETACHED(dev->parent, dev);
if (!(dev->flags & DF_FIXEDCLASS))
devclass_delete_device(dev->devclass, dev);
dev->state = DS_NOTPRESENT;
device_set_driver(dev, NULL);
return (0);
}
int
device_shutdown(device_t dev)
{
if (dev->state < DS_ATTACHED)
return (0);
return (DEVICE_SHUTDOWN(dev));
}
int
device_set_unit(device_t dev, int unit)
{
devclass_t dc;
int err;
dc = device_get_devclass(dev);
if (unit < dc->maxunit && dc->devices[unit])
return (EBUSY);
err = devclass_delete_device(dc, dev);
if (err)
return (err);
dev->unit = unit;
err = devclass_add_device(dc, dev);
if (err)
return (err);
bus_data_generation_update();
return (0);
}
/*======================================*/
/*
* Access functions for device resources.
*/
/* Runtime version */
Borrow phk's axe and apply the next stage of config(8)'s evolution. Use Warner Losh's "hint" driver to decode ascii strings to fill the resource table at boot time. config(8) no longer generates an ioconf.c table - ie: the configuration no longer has to be compiled into the kernel. You can reconfigure your isa devices with the likes of this at loader(8) time: set hint.ed.0.port=0x320 userconfig will be rewritten to use this style interface one day and will move to /boot/userconfig.4th or something like that. It is still possible to statically compile in a set of hints into a kernel if you do not wish to use loader(8). See the "hints" directive in GENERIC as an example. All device wiring has been moved out of config(8). There is a set of helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98) that extract the 'at isa? port foo irq bar' from the old files and produces a hints file. If you install this file as /boot/device.hints (and update /boot/defaults/loader.conf - You can do a build/install in sys/boot) then loader will load it automatically for you. You can also compile in the hints directly with: hints "device.hints" as well. There are a few things that I'm not too happy with yet. Under this scheme, things like LINT would no longer be useful as "documentation" of settings. I have renamed this file to 'NOTES' and stored the example hints strings in it. However... this is not something that config(8) understands, so there is a script that extracts the build-specific data from the documentation file (NOTES) to produce a LINT that can be config'ed and built. A stack of man4 pages will need updating. :-/ Also, since there is no longer a difference between 'device' and 'pseudo-device' I collapsed the two together, and the resulting 'device' takes a 'number of units' for devices that still have it statically allocated. eg: 'device fe 4' will compile the fe driver with NFE set to 4. You can then set hints for 4 units (0 - 3). Also note that 'device fe0' will be interpreted as "zero units of 'fe'" which would be bad, so there is a config warning for this. This is only needed for old drivers that still have static limits on numbers of units. All the statically limited drivers that I could find were marked. Please exercise EXTREME CAUTION when transitioning! Moral support by: phk, msmith, dfr, asmodai, imp, and others
2000-06-13 22:28:50 +00:00
static struct config_device *devtab;
static int devtab_count = 0;
static int
resource_new_name(const char *name, int unit)
{
struct config_device *new;
new = malloc((devtab_count + 1) * sizeof(*new), M_TEMP, M_NOWAIT);
if (new == NULL)
return (-1);
if (devtab && devtab_count > 0)
bcopy(devtab, new, devtab_count * sizeof(*new));
bzero(&new[devtab_count], sizeof(*new));
new[devtab_count].name = malloc(strlen(name) + 1, M_TEMP, M_NOWAIT);
if (new[devtab_count].name == NULL) {
free(new, M_TEMP);
return (-1);
}
strcpy(new[devtab_count].name, name);
new[devtab_count].unit = unit;
new[devtab_count].resource_count = 0;
new[devtab_count].resources = NULL;
devtab = new;
return (devtab_count++);
}
static int
resource_new_resname(int j, const char *resname, resource_type type)
{
struct config_resource *new;
int i;
i = devtab[j].resource_count;
new = malloc((i + 1) * sizeof(*new), M_TEMP, M_NOWAIT);
if (new == NULL)
return (-1);
if (devtab[j].resources && i > 0)
bcopy(devtab[j].resources, new, i * sizeof(*new));
bzero(&new[i], sizeof(*new));
new[i].name = malloc(strlen(resname) + 1, M_TEMP, M_NOWAIT);
if (new[i].name == NULL) {
free(new, M_TEMP);
return (-1);
}
strcpy(new[i].name, resname);
new[i].type = type;
if (devtab[j].resources)
free(devtab[j].resources, M_TEMP);
devtab[j].resources = new;
devtab[j].resource_count = i + 1;
return (i);
}
static int
resource_match_string(int i, const char *resname, const char *value)
{
int j;
struct config_resource *res;
for (j = 0, res = devtab[i].resources;
j < devtab[i].resource_count; j++, res++)
if (!strcmp(res->name, resname)
&& res->type == RES_STRING
&& !strcmp(res->u.stringval, value))
return (j);
return (-1);
}
static int
2000-07-28 22:41:56 +00:00
resource_find_hard(char *cp, const char *name, int unit,
const char *resname, struct config_resource **result)
{
char match[256];
int matchlen;
char *op;
long val;
snprintf(match, sizeof(match), "hint.%s.%d.%s=", name, unit, resname);
matchlen = strlen(match);
while (cp) {
if (strncmp(match, cp, matchlen) == 0)
break;
while (*cp != '\0')
cp++;
cp++;
if (*cp == '\0') {
cp = NULL;
break;
}
}
if (cp)
cp += matchlen; /* skip over name and '=' */
else
return (ENOENT);
val = strtoul(cp, &op, 0);
if (*cp != '\0' && *op == '\0') {
(*result)->type = RES_INT;
(*result)->u.intval = val;
} else {
(*result)->type = RES_STRING;
(*result)->u.stringval = cp;
}
return (0);
}
static int
resource_find(const char *name, int unit, const char *resname,
struct config_resource **result)
{
int i, j;
struct config_resource *res;
if (!hints_loaded) {
/* First specific, then generic. Dynamic over static. */
i = resource_find_hard(kern_envp, name, unit, resname, result);
if (i == 0)
return (0);
i = resource_find_hard(static_hints, name, unit, resname,
result);
if (i == 0)
return (0);
i = resource_find_hard(kern_envp, name, -1, resname, result);
if (i == 0)
return (0);
i = resource_find_hard(static_hints, name, -1, resname, result);
return (i);
}
/*
* First check specific instances, then generic.
*/
for (i = 0; i < devtab_count; i++) {
if (devtab[i].unit < 0)
continue;
if (!strcmp(devtab[i].name, name) && devtab[i].unit == unit) {
res = devtab[i].resources;
for (j = 0; j < devtab[i].resource_count; j++, res++)
if (!strcmp(res->name, resname)) {
*result = res;
return (0);
}
}
}
for (i = 0; i < devtab_count; i++) {
if (devtab[i].unit >= 0)
continue;
if (!strcmp(devtab[i].name, name)) {
res = devtab[i].resources;
for (j = 0; j < devtab[i].resource_count; j++, res++)
if (!strcmp(res->name, resname)) {
*result = res;
return (0);
}
}
}
return (ENOENT);
}
int
resource_int_value(const char *name, int unit, const char *resname, int *result)
{
struct config_resource tmpres;
struct config_resource *res;
int error;
res = &tmpres;
if ((error = resource_find(name, unit, resname, &res)) != 0)
return (error);
if (res->type != RES_INT)
return (EFTYPE);
*result = res->u.intval;
return (0);
}
int
resource_long_value(const char *name, int unit, const char *resname,
long *result)
{
struct config_resource tmpres;
struct config_resource *res;
int error;
res = &tmpres;
if ((error = resource_find(name, unit, resname, &res)) != 0)
return (error);
if (res->type != RES_LONG)
return (EFTYPE);
*result = res->u.longval;
return (0);
}
int
resource_string_value(const char *name, int unit, const char *resname,
char **result)
{
struct config_resource tmpres;
struct config_resource *res;
int error;
res = &tmpres;
if ((error = resource_find(name, unit, resname, &res)) != 0)
return (error);
if (res->type != RES_STRING)
return (EFTYPE);
*result = res->u.stringval;
return (0);
}
int
resource_query_string(int i, const char *resname, const char *value)
{
if (i < 0)
i = 0;
else
i = i + 1;
for (; i < devtab_count; i++)
if (resource_match_string(i, resname, value) >= 0)
return (i);
return (-1);
}
int
resource_locate(int i, const char *resname)
{
if (i < 0)
i = 0;
else
i = i + 1;
for (; i < devtab_count; i++)
if (!strcmp(devtab[i].name, resname))
return (i);
return (-1);
}
int
resource_count(void)
{
return (devtab_count);
}
char *
resource_query_name(int i)
{
return (devtab[i].name);
}
int
resource_query_unit(int i)
{
return (devtab[i].unit);
}
static int
resource_create(const char *name, int unit, const char *resname,
resource_type type, struct config_resource **result)
{
int i, j;
struct config_resource *res = NULL;
for (i = 0; i < devtab_count; i++) {
if (!strcmp(devtab[i].name, name) && devtab[i].unit == unit) {
res = devtab[i].resources;
break;
}
}
if (res == NULL) {
i = resource_new_name(name, unit);
if (i < 0)
return (ENOMEM);
res = devtab[i].resources;
}
for (j = 0; j < devtab[i].resource_count; j++, res++) {
if (!strcmp(res->name, resname)) {
*result = res;
return (0);
}
}
j = resource_new_resname(i, resname, type);
if (j < 0)
return (ENOMEM);
res = &devtab[i].resources[j];
*result = res;
return (0);
}
int
resource_set_int(const char *name, int unit, const char *resname, int value)
{
int error;
struct config_resource *res;
error = resource_create(name, unit, resname, RES_INT, &res);
if (error)
return (error);
if (res->type != RES_INT)
return (EFTYPE);
res->u.intval = value;
return (0);
}
int
resource_set_long(const char *name, int unit, const char *resname, long value)
{
int error;
struct config_resource *res;
error = resource_create(name, unit, resname, RES_LONG, &res);
if (error)
return (error);
if (res->type != RES_LONG)
return (EFTYPE);
res->u.longval = value;
return (0);
}
int
resource_set_string(const char *name, int unit, const char *resname,
const char *value)
{
int error;
struct config_resource *res;
error = resource_create(name, unit, resname, RES_STRING, &res);
if (error)
return (error);
if (res->type != RES_STRING)
return (EFTYPE);
if (res->u.stringval)
free(res->u.stringval, M_TEMP);
res->u.stringval = malloc(strlen(value) + 1, M_TEMP, M_NOWAIT);
if (res->u.stringval == NULL)
return (ENOMEM);
strcpy(res->u.stringval, value);
return (0);
}
Borrow phk's axe and apply the next stage of config(8)'s evolution. Use Warner Losh's "hint" driver to decode ascii strings to fill the resource table at boot time. config(8) no longer generates an ioconf.c table - ie: the configuration no longer has to be compiled into the kernel. You can reconfigure your isa devices with the likes of this at loader(8) time: set hint.ed.0.port=0x320 userconfig will be rewritten to use this style interface one day and will move to /boot/userconfig.4th or something like that. It is still possible to statically compile in a set of hints into a kernel if you do not wish to use loader(8). See the "hints" directive in GENERIC as an example. All device wiring has been moved out of config(8). There is a set of helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98) that extract the 'at isa? port foo irq bar' from the old files and produces a hints file. If you install this file as /boot/device.hints (and update /boot/defaults/loader.conf - You can do a build/install in sys/boot) then loader will load it automatically for you. You can also compile in the hints directly with: hints "device.hints" as well. There are a few things that I'm not too happy with yet. Under this scheme, things like LINT would no longer be useful as "documentation" of settings. I have renamed this file to 'NOTES' and stored the example hints strings in it. However... this is not something that config(8) understands, so there is a script that extracts the build-specific data from the documentation file (NOTES) to produce a LINT that can be config'ed and built. A stack of man4 pages will need updating. :-/ Also, since there is no longer a difference between 'device' and 'pseudo-device' I collapsed the two together, and the resulting 'device' takes a 'number of units' for devices that still have it statically allocated. eg: 'device fe 4' will compile the fe driver with NFE set to 4. You can then set hints for 4 units (0 - 3). Also note that 'device fe0' will be interpreted as "zero units of 'fe'" which would be bad, so there is a config warning for this. This is only needed for old drivers that still have static limits on numbers of units. All the statically limited drivers that I could find were marked. Please exercise EXTREME CAUTION when transitioning! Moral support by: phk, msmith, dfr, asmodai, imp, and others
2000-06-13 22:28:50 +00:00
/*
* We use the identify routine to get the hints for all the other devices.
* Strings that are all digits or begin with 0x are integers.
*
* hint.aha.0.bus_speedup=1
* hint.aha.1.irq=10
* hint.wl.0.netid=PLUG
* hint.wl.1.netid=XYZZY
*/
static void
hint_load(char *cp)
{
char *ep, *op, *walker;
int len;
int val;
char name[20];
int unit;
char resname[255];
for (ep = cp; *ep != '=' && *ep != '\0'; ep++)
continue;
Borrow phk's axe and apply the next stage of config(8)'s evolution. Use Warner Losh's "hint" driver to decode ascii strings to fill the resource table at boot time. config(8) no longer generates an ioconf.c table - ie: the configuration no longer has to be compiled into the kernel. You can reconfigure your isa devices with the likes of this at loader(8) time: set hint.ed.0.port=0x320 userconfig will be rewritten to use this style interface one day and will move to /boot/userconfig.4th or something like that. It is still possible to statically compile in a set of hints into a kernel if you do not wish to use loader(8). See the "hints" directive in GENERIC as an example. All device wiring has been moved out of config(8). There is a set of helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98) that extract the 'at isa? port foo irq bar' from the old files and produces a hints file. If you install this file as /boot/device.hints (and update /boot/defaults/loader.conf - You can do a build/install in sys/boot) then loader will load it automatically for you. You can also compile in the hints directly with: hints "device.hints" as well. There are a few things that I'm not too happy with yet. Under this scheme, things like LINT would no longer be useful as "documentation" of settings. I have renamed this file to 'NOTES' and stored the example hints strings in it. However... this is not something that config(8) understands, so there is a script that extracts the build-specific data from the documentation file (NOTES) to produce a LINT that can be config'ed and built. A stack of man4 pages will need updating. :-/ Also, since there is no longer a difference between 'device' and 'pseudo-device' I collapsed the two together, and the resulting 'device' takes a 'number of units' for devices that still have it statically allocated. eg: 'device fe 4' will compile the fe driver with NFE set to 4. You can then set hints for 4 units (0 - 3). Also note that 'device fe0' will be interpreted as "zero units of 'fe'" which would be bad, so there is a config warning for this. This is only needed for old drivers that still have static limits on numbers of units. All the statically limited drivers that I could find were marked. Please exercise EXTREME CAUTION when transitioning! Moral support by: phk, msmith, dfr, asmodai, imp, and others
2000-06-13 22:28:50 +00:00
len = ep - cp;
if (*ep == '=')
ep++;
walker = cp;
walker += 5;
op = walker;
while (*walker && *walker != '.')
walker++;
if (*walker != '.')
return;
if (walker - op > sizeof(name))
return;
strncpy(name, op, walker - op);
name[walker - op] = '\0';
walker++;
op = walker;
while (*walker && *walker != '.')
walker++;
if (*walker != '.')
return;
unit = strtoul(op, &walker, 0);
Borrow phk's axe and apply the next stage of config(8)'s evolution. Use Warner Losh's "hint" driver to decode ascii strings to fill the resource table at boot time. config(8) no longer generates an ioconf.c table - ie: the configuration no longer has to be compiled into the kernel. You can reconfigure your isa devices with the likes of this at loader(8) time: set hint.ed.0.port=0x320 userconfig will be rewritten to use this style interface one day and will move to /boot/userconfig.4th or something like that. It is still possible to statically compile in a set of hints into a kernel if you do not wish to use loader(8). See the "hints" directive in GENERIC as an example. All device wiring has been moved out of config(8). There is a set of helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98) that extract the 'at isa? port foo irq bar' from the old files and produces a hints file. If you install this file as /boot/device.hints (and update /boot/defaults/loader.conf - You can do a build/install in sys/boot) then loader will load it automatically for you. You can also compile in the hints directly with: hints "device.hints" as well. There are a few things that I'm not too happy with yet. Under this scheme, things like LINT would no longer be useful as "documentation" of settings. I have renamed this file to 'NOTES' and stored the example hints strings in it. However... this is not something that config(8) understands, so there is a script that extracts the build-specific data from the documentation file (NOTES) to produce a LINT that can be config'ed and built. A stack of man4 pages will need updating. :-/ Also, since there is no longer a difference between 'device' and 'pseudo-device' I collapsed the two together, and the resulting 'device' takes a 'number of units' for devices that still have it statically allocated. eg: 'device fe 4' will compile the fe driver with NFE set to 4. You can then set hints for 4 units (0 - 3). Also note that 'device fe0' will be interpreted as "zero units of 'fe'" which would be bad, so there is a config warning for this. This is only needed for old drivers that still have static limits on numbers of units. All the statically limited drivers that I could find were marked. Please exercise EXTREME CAUTION when transitioning! Moral support by: phk, msmith, dfr, asmodai, imp, and others
2000-06-13 22:28:50 +00:00
if (*walker != '.')
return;
walker++;
op = walker;
while (*walker && *walker != '=')
walker++;
if (*walker != '=')
return;
if (walker - op > sizeof(resname))
return;
strncpy(resname, op, walker - op);
resname[walker - op] = '\0';
walker++;
if (walker != ep)
return;
if (bootverbose)
Borrow phk's axe and apply the next stage of config(8)'s evolution. Use Warner Losh's "hint" driver to decode ascii strings to fill the resource table at boot time. config(8) no longer generates an ioconf.c table - ie: the configuration no longer has to be compiled into the kernel. You can reconfigure your isa devices with the likes of this at loader(8) time: set hint.ed.0.port=0x320 userconfig will be rewritten to use this style interface one day and will move to /boot/userconfig.4th or something like that. It is still possible to statically compile in a set of hints into a kernel if you do not wish to use loader(8). See the "hints" directive in GENERIC as an example. All device wiring has been moved out of config(8). There is a set of helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98) that extract the 'at isa? port foo irq bar' from the old files and produces a hints file. If you install this file as /boot/device.hints (and update /boot/defaults/loader.conf - You can do a build/install in sys/boot) then loader will load it automatically for you. You can also compile in the hints directly with: hints "device.hints" as well. There are a few things that I'm not too happy with yet. Under this scheme, things like LINT would no longer be useful as "documentation" of settings. I have renamed this file to 'NOTES' and stored the example hints strings in it. However... this is not something that config(8) understands, so there is a script that extracts the build-specific data from the documentation file (NOTES) to produce a LINT that can be config'ed and built. A stack of man4 pages will need updating. :-/ Also, since there is no longer a difference between 'device' and 'pseudo-device' I collapsed the two together, and the resulting 'device' takes a 'number of units' for devices that still have it statically allocated. eg: 'device fe 4' will compile the fe driver with NFE set to 4. You can then set hints for 4 units (0 - 3). Also note that 'device fe0' will be interpreted as "zero units of 'fe'" which would be bad, so there is a config warning for this. This is only needed for old drivers that still have static limits on numbers of units. All the statically limited drivers that I could find were marked. Please exercise EXTREME CAUTION when transitioning! Moral support by: phk, msmith, dfr, asmodai, imp, and others
2000-06-13 22:28:50 +00:00
printf("Setting %s %d %s to ", name, unit, resname);
val = strtoul(ep, &op, 0);
Borrow phk's axe and apply the next stage of config(8)'s evolution. Use Warner Losh's "hint" driver to decode ascii strings to fill the resource table at boot time. config(8) no longer generates an ioconf.c table - ie: the configuration no longer has to be compiled into the kernel. You can reconfigure your isa devices with the likes of this at loader(8) time: set hint.ed.0.port=0x320 userconfig will be rewritten to use this style interface one day and will move to /boot/userconfig.4th or something like that. It is still possible to statically compile in a set of hints into a kernel if you do not wish to use loader(8). See the "hints" directive in GENERIC as an example. All device wiring has been moved out of config(8). There is a set of helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98) that extract the 'at isa? port foo irq bar' from the old files and produces a hints file. If you install this file as /boot/device.hints (and update /boot/defaults/loader.conf - You can do a build/install in sys/boot) then loader will load it automatically for you. You can also compile in the hints directly with: hints "device.hints" as well. There are a few things that I'm not too happy with yet. Under this scheme, things like LINT would no longer be useful as "documentation" of settings. I have renamed this file to 'NOTES' and stored the example hints strings in it. However... this is not something that config(8) understands, so there is a script that extracts the build-specific data from the documentation file (NOTES) to produce a LINT that can be config'ed and built. A stack of man4 pages will need updating. :-/ Also, since there is no longer a difference between 'device' and 'pseudo-device' I collapsed the two together, and the resulting 'device' takes a 'number of units' for devices that still have it statically allocated. eg: 'device fe 4' will compile the fe driver with NFE set to 4. You can then set hints for 4 units (0 - 3). Also note that 'device fe0' will be interpreted as "zero units of 'fe'" which would be bad, so there is a config warning for this. This is only needed for old drivers that still have static limits on numbers of units. All the statically limited drivers that I could find were marked. Please exercise EXTREME CAUTION when transitioning! Moral support by: phk, msmith, dfr, asmodai, imp, and others
2000-06-13 22:28:50 +00:00
if (*ep != '\0' && *op == '\0') {
resource_set_int(name, unit, resname, val);
if (bootverbose)
Borrow phk's axe and apply the next stage of config(8)'s evolution. Use Warner Losh's "hint" driver to decode ascii strings to fill the resource table at boot time. config(8) no longer generates an ioconf.c table - ie: the configuration no longer has to be compiled into the kernel. You can reconfigure your isa devices with the likes of this at loader(8) time: set hint.ed.0.port=0x320 userconfig will be rewritten to use this style interface one day and will move to /boot/userconfig.4th or something like that. It is still possible to statically compile in a set of hints into a kernel if you do not wish to use loader(8). See the "hints" directive in GENERIC as an example. All device wiring has been moved out of config(8). There is a set of helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98) that extract the 'at isa? port foo irq bar' from the old files and produces a hints file. If you install this file as /boot/device.hints (and update /boot/defaults/loader.conf - You can do a build/install in sys/boot) then loader will load it automatically for you. You can also compile in the hints directly with: hints "device.hints" as well. There are a few things that I'm not too happy with yet. Under this scheme, things like LINT would no longer be useful as "documentation" of settings. I have renamed this file to 'NOTES' and stored the example hints strings in it. However... this is not something that config(8) understands, so there is a script that extracts the build-specific data from the documentation file (NOTES) to produce a LINT that can be config'ed and built. A stack of man4 pages will need updating. :-/ Also, since there is no longer a difference between 'device' and 'pseudo-device' I collapsed the two together, and the resulting 'device' takes a 'number of units' for devices that still have it statically allocated. eg: 'device fe 4' will compile the fe driver with NFE set to 4. You can then set hints for 4 units (0 - 3). Also note that 'device fe0' will be interpreted as "zero units of 'fe'" which would be bad, so there is a config warning for this. This is only needed for old drivers that still have static limits on numbers of units. All the statically limited drivers that I could find were marked. Please exercise EXTREME CAUTION when transitioning! Moral support by: phk, msmith, dfr, asmodai, imp, and others
2000-06-13 22:28:50 +00:00
printf("%d (int)\n", val);
} else {
resource_set_string(name, unit, resname, ep);
if (bootverbose)
Borrow phk's axe and apply the next stage of config(8)'s evolution. Use Warner Losh's "hint" driver to decode ascii strings to fill the resource table at boot time. config(8) no longer generates an ioconf.c table - ie: the configuration no longer has to be compiled into the kernel. You can reconfigure your isa devices with the likes of this at loader(8) time: set hint.ed.0.port=0x320 userconfig will be rewritten to use this style interface one day and will move to /boot/userconfig.4th or something like that. It is still possible to statically compile in a set of hints into a kernel if you do not wish to use loader(8). See the "hints" directive in GENERIC as an example. All device wiring has been moved out of config(8). There is a set of helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98) that extract the 'at isa? port foo irq bar' from the old files and produces a hints file. If you install this file as /boot/device.hints (and update /boot/defaults/loader.conf - You can do a build/install in sys/boot) then loader will load it automatically for you. You can also compile in the hints directly with: hints "device.hints" as well. There are a few things that I'm not too happy with yet. Under this scheme, things like LINT would no longer be useful as "documentation" of settings. I have renamed this file to 'NOTES' and stored the example hints strings in it. However... this is not something that config(8) understands, so there is a script that extracts the build-specific data from the documentation file (NOTES) to produce a LINT that can be config'ed and built. A stack of man4 pages will need updating. :-/ Also, since there is no longer a difference between 'device' and 'pseudo-device' I collapsed the two together, and the resulting 'device' takes a 'number of units' for devices that still have it statically allocated. eg: 'device fe 4' will compile the fe driver with NFE set to 4. You can then set hints for 4 units (0 - 3). Also note that 'device fe0' will be interpreted as "zero units of 'fe'" which would be bad, so there is a config warning for this. This is only needed for old drivers that still have static limits on numbers of units. All the statically limited drivers that I could find were marked. Please exercise EXTREME CAUTION when transitioning! Moral support by: phk, msmith, dfr, asmodai, imp, and others
2000-06-13 22:28:50 +00:00
printf("%s (string)\n", ep);
}
}
static void
Borrow phk's axe and apply the next stage of config(8)'s evolution. Use Warner Losh's "hint" driver to decode ascii strings to fill the resource table at boot time. config(8) no longer generates an ioconf.c table - ie: the configuration no longer has to be compiled into the kernel. You can reconfigure your isa devices with the likes of this at loader(8) time: set hint.ed.0.port=0x320 userconfig will be rewritten to use this style interface one day and will move to /boot/userconfig.4th or something like that. It is still possible to statically compile in a set of hints into a kernel if you do not wish to use loader(8). See the "hints" directive in GENERIC as an example. All device wiring has been moved out of config(8). There is a set of helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98) that extract the 'at isa? port foo irq bar' from the old files and produces a hints file. If you install this file as /boot/device.hints (and update /boot/defaults/loader.conf - You can do a build/install in sys/boot) then loader will load it automatically for you. You can also compile in the hints directly with: hints "device.hints" as well. There are a few things that I'm not too happy with yet. Under this scheme, things like LINT would no longer be useful as "documentation" of settings. I have renamed this file to 'NOTES' and stored the example hints strings in it. However... this is not something that config(8) understands, so there is a script that extracts the build-specific data from the documentation file (NOTES) to produce a LINT that can be config'ed and built. A stack of man4 pages will need updating. :-/ Also, since there is no longer a difference between 'device' and 'pseudo-device' I collapsed the two together, and the resulting 'device' takes a 'number of units' for devices that still have it statically allocated. eg: 'device fe 4' will compile the fe driver with NFE set to 4. You can then set hints for 4 units (0 - 3). Also note that 'device fe0' will be interpreted as "zero units of 'fe'" which would be bad, so there is a config warning for this. This is only needed for old drivers that still have static limits on numbers of units. All the statically limited drivers that I could find were marked. Please exercise EXTREME CAUTION when transitioning! Moral support by: phk, msmith, dfr, asmodai, imp, and others
2000-06-13 22:28:50 +00:00
hints_load(void *dummy __unused)
{
Borrow phk's axe and apply the next stage of config(8)'s evolution. Use Warner Losh's "hint" driver to decode ascii strings to fill the resource table at boot time. config(8) no longer generates an ioconf.c table - ie: the configuration no longer has to be compiled into the kernel. You can reconfigure your isa devices with the likes of this at loader(8) time: set hint.ed.0.port=0x320 userconfig will be rewritten to use this style interface one day and will move to /boot/userconfig.4th or something like that. It is still possible to statically compile in a set of hints into a kernel if you do not wish to use loader(8). See the "hints" directive in GENERIC as an example. All device wiring has been moved out of config(8). There is a set of helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98) that extract the 'at isa? port foo irq bar' from the old files and produces a hints file. If you install this file as /boot/device.hints (and update /boot/defaults/loader.conf - You can do a build/install in sys/boot) then loader will load it automatically for you. You can also compile in the hints directly with: hints "device.hints" as well. There are a few things that I'm not too happy with yet. Under this scheme, things like LINT would no longer be useful as "documentation" of settings. I have renamed this file to 'NOTES' and stored the example hints strings in it. However... this is not something that config(8) understands, so there is a script that extracts the build-specific data from the documentation file (NOTES) to produce a LINT that can be config'ed and built. A stack of man4 pages will need updating. :-/ Also, since there is no longer a difference between 'device' and 'pseudo-device' I collapsed the two together, and the resulting 'device' takes a 'number of units' for devices that still have it statically allocated. eg: 'device fe 4' will compile the fe driver with NFE set to 4. You can then set hints for 4 units (0 - 3). Also note that 'device fe0' will be interpreted as "zero units of 'fe'" which would be bad, so there is a config warning for this. This is only needed for old drivers that still have static limits on numbers of units. All the statically limited drivers that I could find were marked. Please exercise EXTREME CAUTION when transitioning! Moral support by: phk, msmith, dfr, asmodai, imp, and others
2000-06-13 22:28:50 +00:00
char *cp;
if (hintmode == 2) { /* default hints only */
cp = kern_envp;
while (cp) {
if (strncmp(cp, "hint.", 5) == 0) {
/* ok, we found a hint, ignore these defaults */
hintmode = 0;
break;
}
while (*cp != '\0')
cp++;
Borrow phk's axe and apply the next stage of config(8)'s evolution. Use Warner Losh's "hint" driver to decode ascii strings to fill the resource table at boot time. config(8) no longer generates an ioconf.c table - ie: the configuration no longer has to be compiled into the kernel. You can reconfigure your isa devices with the likes of this at loader(8) time: set hint.ed.0.port=0x320 userconfig will be rewritten to use this style interface one day and will move to /boot/userconfig.4th or something like that. It is still possible to statically compile in a set of hints into a kernel if you do not wish to use loader(8). See the "hints" directive in GENERIC as an example. All device wiring has been moved out of config(8). There is a set of helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98) that extract the 'at isa? port foo irq bar' from the old files and produces a hints file. If you install this file as /boot/device.hints (and update /boot/defaults/loader.conf - You can do a build/install in sys/boot) then loader will load it automatically for you. You can also compile in the hints directly with: hints "device.hints" as well. There are a few things that I'm not too happy with yet. Under this scheme, things like LINT would no longer be useful as "documentation" of settings. I have renamed this file to 'NOTES' and stored the example hints strings in it. However... this is not something that config(8) understands, so there is a script that extracts the build-specific data from the documentation file (NOTES) to produce a LINT that can be config'ed and built. A stack of man4 pages will need updating. :-/ Also, since there is no longer a difference between 'device' and 'pseudo-device' I collapsed the two together, and the resulting 'device' takes a 'number of units' for devices that still have it statically allocated. eg: 'device fe 4' will compile the fe driver with NFE set to 4. You can then set hints for 4 units (0 - 3). Also note that 'device fe0' will be interpreted as "zero units of 'fe'" which would be bad, so there is a config warning for this. This is only needed for old drivers that still have static limits on numbers of units. All the statically limited drivers that I could find were marked. Please exercise EXTREME CAUTION when transitioning! Moral support by: phk, msmith, dfr, asmodai, imp, and others
2000-06-13 22:28:50 +00:00
cp++;
if (*cp == '\0')
break;
}
}
if (hintmode != 0) {
cp = static_hints;
while (cp) {
if (strncmp(cp, "hint.", 5) == 0)
hint_load(cp);
while (*cp != '\0')
cp++;
cp++;
if (*cp == '\0')
break;
}
Borrow phk's axe and apply the next stage of config(8)'s evolution. Use Warner Losh's "hint" driver to decode ascii strings to fill the resource table at boot time. config(8) no longer generates an ioconf.c table - ie: the configuration no longer has to be compiled into the kernel. You can reconfigure your isa devices with the likes of this at loader(8) time: set hint.ed.0.port=0x320 userconfig will be rewritten to use this style interface one day and will move to /boot/userconfig.4th or something like that. It is still possible to statically compile in a set of hints into a kernel if you do not wish to use loader(8). See the "hints" directive in GENERIC as an example. All device wiring has been moved out of config(8). There is a set of helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98) that extract the 'at isa? port foo irq bar' from the old files and produces a hints file. If you install this file as /boot/device.hints (and update /boot/defaults/loader.conf - You can do a build/install in sys/boot) then loader will load it automatically for you. You can also compile in the hints directly with: hints "device.hints" as well. There are a few things that I'm not too happy with yet. Under this scheme, things like LINT would no longer be useful as "documentation" of settings. I have renamed this file to 'NOTES' and stored the example hints strings in it. However... this is not something that config(8) understands, so there is a script that extracts the build-specific data from the documentation file (NOTES) to produce a LINT that can be config'ed and built. A stack of man4 pages will need updating. :-/ Also, since there is no longer a difference between 'device' and 'pseudo-device' I collapsed the two together, and the resulting 'device' takes a 'number of units' for devices that still have it statically allocated. eg: 'device fe 4' will compile the fe driver with NFE set to 4. You can then set hints for 4 units (0 - 3). Also note that 'device fe0' will be interpreted as "zero units of 'fe'" which would be bad, so there is a config warning for this. This is only needed for old drivers that still have static limits on numbers of units. All the statically limited drivers that I could find were marked. Please exercise EXTREME CAUTION when transitioning! Moral support by: phk, msmith, dfr, asmodai, imp, and others
2000-06-13 22:28:50 +00:00
}
cp = kern_envp;
while (cp) {
if (strncmp(cp, "hint.", 5) == 0)
hint_load(cp);
while (*cp != '\0')
Borrow phk's axe and apply the next stage of config(8)'s evolution. Use Warner Losh's "hint" driver to decode ascii strings to fill the resource table at boot time. config(8) no longer generates an ioconf.c table - ie: the configuration no longer has to be compiled into the kernel. You can reconfigure your isa devices with the likes of this at loader(8) time: set hint.ed.0.port=0x320 userconfig will be rewritten to use this style interface one day and will move to /boot/userconfig.4th or something like that. It is still possible to statically compile in a set of hints into a kernel if you do not wish to use loader(8). See the "hints" directive in GENERIC as an example. All device wiring has been moved out of config(8). There is a set of helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98) that extract the 'at isa? port foo irq bar' from the old files and produces a hints file. If you install this file as /boot/device.hints (and update /boot/defaults/loader.conf - You can do a build/install in sys/boot) then loader will load it automatically for you. You can also compile in the hints directly with: hints "device.hints" as well. There are a few things that I'm not too happy with yet. Under this scheme, things like LINT would no longer be useful as "documentation" of settings. I have renamed this file to 'NOTES' and stored the example hints strings in it. However... this is not something that config(8) understands, so there is a script that extracts the build-specific data from the documentation file (NOTES) to produce a LINT that can be config'ed and built. A stack of man4 pages will need updating. :-/ Also, since there is no longer a difference between 'device' and 'pseudo-device' I collapsed the two together, and the resulting 'device' takes a 'number of units' for devices that still have it statically allocated. eg: 'device fe 4' will compile the fe driver with NFE set to 4. You can then set hints for 4 units (0 - 3). Also note that 'device fe0' will be interpreted as "zero units of 'fe'" which would be bad, so there is a config warning for this. This is only needed for old drivers that still have static limits on numbers of units. All the statically limited drivers that I could find were marked. Please exercise EXTREME CAUTION when transitioning! Moral support by: phk, msmith, dfr, asmodai, imp, and others
2000-06-13 22:28:50 +00:00
cp++;
cp++;
if (*cp == '\0')
Borrow phk's axe and apply the next stage of config(8)'s evolution. Use Warner Losh's "hint" driver to decode ascii strings to fill the resource table at boot time. config(8) no longer generates an ioconf.c table - ie: the configuration no longer has to be compiled into the kernel. You can reconfigure your isa devices with the likes of this at loader(8) time: set hint.ed.0.port=0x320 userconfig will be rewritten to use this style interface one day and will move to /boot/userconfig.4th or something like that. It is still possible to statically compile in a set of hints into a kernel if you do not wish to use loader(8). See the "hints" directive in GENERIC as an example. All device wiring has been moved out of config(8). There is a set of helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98) that extract the 'at isa? port foo irq bar' from the old files and produces a hints file. If you install this file as /boot/device.hints (and update /boot/defaults/loader.conf - You can do a build/install in sys/boot) then loader will load it automatically for you. You can also compile in the hints directly with: hints "device.hints" as well. There are a few things that I'm not too happy with yet. Under this scheme, things like LINT would no longer be useful as "documentation" of settings. I have renamed this file to 'NOTES' and stored the example hints strings in it. However... this is not something that config(8) understands, so there is a script that extracts the build-specific data from the documentation file (NOTES) to produce a LINT that can be config'ed and built. A stack of man4 pages will need updating. :-/ Also, since there is no longer a difference between 'device' and 'pseudo-device' I collapsed the two together, and the resulting 'device' takes a 'number of units' for devices that still have it statically allocated. eg: 'device fe 4' will compile the fe driver with NFE set to 4. You can then set hints for 4 units (0 - 3). Also note that 'device fe0' will be interpreted as "zero units of 'fe'" which would be bad, so there is a config warning for this. This is only needed for old drivers that still have static limits on numbers of units. All the statically limited drivers that I could find were marked. Please exercise EXTREME CAUTION when transitioning! Moral support by: phk, msmith, dfr, asmodai, imp, and others
2000-06-13 22:28:50 +00:00
break;
}
hints_loaded++;
}
Borrow phk's axe and apply the next stage of config(8)'s evolution. Use Warner Losh's "hint" driver to decode ascii strings to fill the resource table at boot time. config(8) no longer generates an ioconf.c table - ie: the configuration no longer has to be compiled into the kernel. You can reconfigure your isa devices with the likes of this at loader(8) time: set hint.ed.0.port=0x320 userconfig will be rewritten to use this style interface one day and will move to /boot/userconfig.4th or something like that. It is still possible to statically compile in a set of hints into a kernel if you do not wish to use loader(8). See the "hints" directive in GENERIC as an example. All device wiring has been moved out of config(8). There is a set of helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98) that extract the 'at isa? port foo irq bar' from the old files and produces a hints file. If you install this file as /boot/device.hints (and update /boot/defaults/loader.conf - You can do a build/install in sys/boot) then loader will load it automatically for you. You can also compile in the hints directly with: hints "device.hints" as well. There are a few things that I'm not too happy with yet. Under this scheme, things like LINT would no longer be useful as "documentation" of settings. I have renamed this file to 'NOTES' and stored the example hints strings in it. However... this is not something that config(8) understands, so there is a script that extracts the build-specific data from the documentation file (NOTES) to produce a LINT that can be config'ed and built. A stack of man4 pages will need updating. :-/ Also, since there is no longer a difference between 'device' and 'pseudo-device' I collapsed the two together, and the resulting 'device' takes a 'number of units' for devices that still have it statically allocated. eg: 'device fe 4' will compile the fe driver with NFE set to 4. You can then set hints for 4 units (0 - 3). Also note that 'device fe0' will be interpreted as "zero units of 'fe'" which would be bad, so there is a config warning for this. This is only needed for old drivers that still have static limits on numbers of units. All the statically limited drivers that I could find were marked. Please exercise EXTREME CAUTION when transitioning! Moral support by: phk, msmith, dfr, asmodai, imp, and others
2000-06-13 22:28:50 +00:00
SYSINIT(cfghints, SI_SUB_KMEM, SI_ORDER_ANY + 60, hints_load, 0)
/*======================================*/
/*
* Some useful method implementations to make life easier for bus drivers.
*/
void
resource_list_init(struct resource_list *rl)
{
SLIST_INIT(rl);
}
void
resource_list_free(struct resource_list *rl)
{
struct resource_list_entry *rle;
while ((rle = SLIST_FIRST(rl)) != NULL) {
if (rle->res)
panic("resource_list_free: resource entry is busy");
SLIST_REMOVE_HEAD(rl, link);
free(rle, M_BUS);
}
}
void
resource_list_add(struct resource_list *rl, int type, int rid,
u_long start, u_long end, u_long count)
{
struct resource_list_entry *rle;
rle = resource_list_find(rl, type, rid);
if (!rle) {
rle = malloc(sizeof(struct resource_list_entry), M_BUS,
M_NOWAIT);
if (!rle)
panic("resource_list_add: can't record entry");
SLIST_INSERT_HEAD(rl, rle, link);
rle->type = type;
rle->rid = rid;
rle->res = NULL;
}
if (rle->res)
panic("resource_list_add: resource entry is busy");
rle->start = start;
rle->end = end;
rle->count = count;
}
struct resource_list_entry *
resource_list_find(struct resource_list *rl, int type, int rid)
{
struct resource_list_entry *rle;
SLIST_FOREACH(rle, rl, link) {
if (rle->type == type && rle->rid == rid)
return (rle);
}
return (NULL);
}
void
resource_list_delete(struct resource_list *rl, int type, int rid)
{
struct resource_list_entry *rle = resource_list_find(rl, type, rid);
if (rle) {
if (rle->res != NULL)
panic("resource_list_delete: resource has not been released");
SLIST_REMOVE(rl, rle, resource_list_entry, link);
free(rle, M_BUS);
}
}
struct resource *
resource_list_alloc(struct resource_list *rl, device_t bus, device_t child,
int type, int *rid, u_long start, u_long end, u_long count, u_int flags)
{
struct resource_list_entry *rle = 0;
int passthrough = (device_get_parent(child) != bus);
int isdefault = (start == 0UL && end == ~0UL);
if (passthrough) {
return (BUS_ALLOC_RESOURCE(device_get_parent(bus), child,
type, rid, start, end, count, flags));
}
rle = resource_list_find(rl, type, *rid);
if (!rle)
return (NULL); /* no resource of that type/rid */
if (rle->res)
panic("resource_list_alloc: resource entry is busy");
if (isdefault) {
start = rle->start;
count = max(count, rle->count);
end = max(rle->end, start + count - 1);
}
rle->res = BUS_ALLOC_RESOURCE(device_get_parent(bus), child,
type, rid, start, end, count, flags);
/*
* Record the new range.
*/
if (rle->res) {
rle->start = rman_get_start(rle->res);
rle->end = rman_get_end(rle->res);
rle->count = count;
}
return (rle->res);
}
int
resource_list_release(struct resource_list *rl, device_t bus, device_t child,
int type, int rid, struct resource *res)
{
struct resource_list_entry *rle = 0;
int passthrough = (device_get_parent(child) != bus);
int error;
if (passthrough) {
return (BUS_RELEASE_RESOURCE(device_get_parent(bus), child,
type, rid, res));
}
rle = resource_list_find(rl, type, rid);
if (!rle)
panic("resource_list_release: can't find resource");
if (!rle->res)
panic("resource_list_release: resource entry is not busy");
error = BUS_RELEASE_RESOURCE(device_get_parent(bus), child,
type, rid, res);
if (error)
return (error);
rle->res = NULL;
return (0);
}
/*
* Call DEVICE_IDENTIFY for each driver.
*/
int
bus_generic_probe(device_t dev)
{
devclass_t dc = dev->devclass;
driverlink_t dl;
TAILQ_FOREACH(dl, &dc->drivers, link) {
DEVICE_IDENTIFY(dl->driver, dev);
}
return (0);
}
int
bus_generic_attach(device_t dev)
{
device_t child;
TAILQ_FOREACH(child, &dev->children, link) {
device_probe_and_attach(child);
}
return (0);
}
int
bus_generic_detach(device_t dev)
{
device_t child;
int error;
if (dev->state != DS_ATTACHED)
return (EBUSY);
TAILQ_FOREACH(child, &dev->children, link) {
if ((error = device_detach(child)) != 0)
return (error);
}
return (0);
}
int
bus_generic_shutdown(device_t dev)
{
device_t child;
TAILQ_FOREACH(child, &dev->children, link) {
device_shutdown(child);
}
return (0);
}
int
bus_generic_suspend(device_t dev)
{
int error;
device_t child, child2;
TAILQ_FOREACH(child, &dev->children, link) {
error = DEVICE_SUSPEND(child);
if (error) {
for (child2 = TAILQ_FIRST(&dev->children);
child2 && child2 != child;
child2 = TAILQ_NEXT(child2, link))
DEVICE_RESUME(child2);
return (error);
}
}
return (0);
}
int
bus_generic_resume(device_t dev)
{
device_t child;
TAILQ_FOREACH(child, &dev->children, link) {
DEVICE_RESUME(child);
/* if resume fails, there's nothing we can usefully do... */
}
return (0);
}
int
bus_print_child_header (device_t dev, device_t child)
{
int retval = 0;
if (device_get_desc(child)) {
retval += device_printf(child, "<%s>", device_get_desc(child));
} else {
retval += printf("%s", device_get_nameunit(child));
}
return (retval);
}
int
bus_print_child_footer (device_t dev, device_t child)
{
return (printf(" on %s\n", device_get_nameunit(dev)));
}
int
bus_generic_print_child(device_t dev, device_t child)
{
int retval = 0;
retval += bus_print_child_header(dev, child);
retval += bus_print_child_footer(dev, child);
return (retval);
}
int
bus_generic_read_ivar(device_t dev, device_t child, int index,
uintptr_t * result)
{
return (ENOENT);
}
int
bus_generic_write_ivar(device_t dev, device_t child, int index,
uintptr_t value)
{
return (ENOENT);
}
struct resource_list *
bus_generic_get_resource_list (device_t dev, device_t child)
{
return (NULL);
}
void
bus_generic_driver_added(device_t dev, driver_t *driver)
{
device_t child;
DEVICE_IDENTIFY(driver, dev);
TAILQ_FOREACH(child, &dev->children, link) {
if (child->state == DS_NOTPRESENT)
device_probe_and_attach(child);
}
}
int
bus_generic_setup_intr(device_t dev, device_t child, struct resource *irq,
int flags, driver_intr_t *intr, void *arg, void **cookiep)
{
/* Propagate up the bus hierarchy until someone handles it. */
if (dev->parent)
return (BUS_SETUP_INTR(dev->parent, child, irq, flags,
intr, arg, cookiep));
return (EINVAL);
}
int
bus_generic_teardown_intr(device_t dev, device_t child, struct resource *irq,
void *cookie)
{
/* Propagate up the bus hierarchy until someone handles it. */
if (dev->parent)
return (BUS_TEARDOWN_INTR(dev->parent, child, irq, cookie));
return (EINVAL);
}
struct resource *
bus_generic_alloc_resource(device_t dev, device_t child, int type, int *rid,
u_long start, u_long end, u_long count, u_int flags)
{
/* Propagate up the bus hierarchy until someone handles it. */
if (dev->parent)
return (BUS_ALLOC_RESOURCE(dev->parent, child, type, rid,
start, end, count, flags));
return (NULL);
}
int
bus_generic_release_resource(device_t dev, device_t child, int type, int rid,
struct resource *r)
{
/* Propagate up the bus hierarchy until someone handles it. */
if (dev->parent)
return (BUS_RELEASE_RESOURCE(dev->parent, child, type, rid,
r));
return (EINVAL);
}
int
bus_generic_activate_resource(device_t dev, device_t child, int type, int rid,
struct resource *r)
{
/* Propagate up the bus hierarchy until someone handles it. */
if (dev->parent)
return (BUS_ACTIVATE_RESOURCE(dev->parent, child, type, rid,
r));
return (EINVAL);
}
int
bus_generic_deactivate_resource(device_t dev, device_t child, int type,
int rid, struct resource *r)
{
/* Propagate up the bus hierarchy until someone handles it. */
if (dev->parent)
return (BUS_DEACTIVATE_RESOURCE(dev->parent, child, type, rid,
r));
return (EINVAL);
}
int
bus_generic_rl_get_resource (device_t dev, device_t child, int type, int rid,
u_long *startp, u_long *countp)
{
struct resource_list * rl = NULL;
struct resource_list_entry * rle = NULL;
rl = BUS_GET_RESOURCE_LIST(dev, child);
if (!rl)
return (EINVAL);
rle = resource_list_find(rl, type, rid);
if (!rle)
return (ENOENT);
if (startp)
*startp = rle->start;
if (countp)
*countp = rle->count;
return (0);
}
int
bus_generic_rl_set_resource (device_t dev, device_t child, int type, int rid,
u_long start, u_long count)
{
struct resource_list * rl = NULL;
rl = BUS_GET_RESOURCE_LIST(dev, child);
if (!rl)
return (EINVAL);
resource_list_add(rl, type, rid, start, (start + count - 1), count);
return (0);
}
void
bus_generic_rl_delete_resource (device_t dev, device_t child, int type, int rid)
{
struct resource_list * rl = NULL;
rl = BUS_GET_RESOURCE_LIST(dev, child);
if (!rl)
return;
resource_list_delete(rl, type, rid);
return;
}
int
bus_generic_rl_release_resource (device_t dev, device_t child, int type,
int rid, struct resource *r)
{
struct resource_list * rl = NULL;
rl = BUS_GET_RESOURCE_LIST(dev, child);
if (!rl)
return (EINVAL);
return (resource_list_release(rl, dev, child, type, rid, r));
}
struct resource *
bus_generic_rl_alloc_resource (device_t dev, device_t child, int type,
int *rid, u_long start, u_long end, u_long count, u_int flags)
{
struct resource_list * rl = NULL;
rl = BUS_GET_RESOURCE_LIST(dev, child);
if (!rl)
return (NULL);
return (resource_list_alloc(rl, dev, child, type, rid,
start, end, count, flags));
}
/*
* Some convenience functions to make it easier for drivers to use the
* resource-management functions. All these really do is hide the
* indirection through the parent's method table, making for slightly
* less-wordy code. In the future, it might make sense for this code
* to maintain some sort of a list of resources allocated by each device.
*/
struct resource *
bus_alloc_resource(device_t dev, int type, int *rid, u_long start, u_long end,
u_long count, u_int flags)
{
if (dev->parent == 0)
return (0);
return (BUS_ALLOC_RESOURCE(dev->parent, dev, type, rid, start, end,
count, flags));
}
int
bus_activate_resource(device_t dev, int type, int rid, struct resource *r)
{
if (dev->parent == 0)
return (EINVAL);
return (BUS_ACTIVATE_RESOURCE(dev->parent, dev, type, rid, r));
}
int
bus_deactivate_resource(device_t dev, int type, int rid, struct resource *r)
{
if (dev->parent == 0)
return (EINVAL);
return (BUS_DEACTIVATE_RESOURCE(dev->parent, dev, type, rid, r));
}
int
bus_release_resource(device_t dev, int type, int rid, struct resource *r)
{
if (dev->parent == 0)
return (EINVAL);
return (BUS_RELEASE_RESOURCE(dev->parent, dev, type, rid, r));
}
int
bus_setup_intr(device_t dev, struct resource *r, int flags,
driver_intr_t handler, void *arg, void **cookiep)
{
if (dev->parent == 0)
return (EINVAL);
return (BUS_SETUP_INTR(dev->parent, dev, r, flags,
handler, arg, cookiep));
}
int
bus_teardown_intr(device_t dev, struct resource *r, void *cookie)
{
if (dev->parent == 0)
return (EINVAL);
return (BUS_TEARDOWN_INTR(dev->parent, dev, r, cookie));
}
int
bus_set_resource(device_t dev, int type, int rid,
u_long start, u_long count)
{
return BUS_SET_RESOURCE(device_get_parent(dev), dev, type, rid,
start, count);
}
int
bus_get_resource(device_t dev, int type, int rid,
u_long *startp, u_long *countp)
{
return (BUS_GET_RESOURCE(device_get_parent(dev), dev, type, rid,
startp, countp));
}
u_long
bus_get_resource_start(device_t dev, int type, int rid)
{
u_long start, count;
int error;
error = BUS_GET_RESOURCE(device_get_parent(dev), dev, type, rid,
&start, &count);
if (error)
return (0);
return (start);
}
u_long
bus_get_resource_count(device_t dev, int type, int rid)
{
u_long start, count;
int error;
error = BUS_GET_RESOURCE(device_get_parent(dev), dev, type, rid,
&start, &count);
if (error)
return (0);
return (count);
}
void
bus_delete_resource(device_t dev, int type, int rid)
{
BUS_DELETE_RESOURCE(device_get_parent(dev), dev, type, rid);
}
static int
root_print_child(device_t dev, device_t child)
{
int retval = 0;
retval += bus_print_child_header(dev, child);
retval += printf("\n");
return (retval);
}
static int
root_setup_intr(device_t dev, device_t child, driver_intr_t *intr, void *arg,
void **cookiep)
{
/*
* If an interrupt mapping gets to here something bad has happened.
*/
panic("root_setup_intr");
}
static kobj_method_t root_methods[] = {
/* Device interface */
KOBJMETHOD(device_shutdown, bus_generic_shutdown),
KOBJMETHOD(device_suspend, bus_generic_suspend),
KOBJMETHOD(device_resume, bus_generic_resume),
/* Bus interface */
KOBJMETHOD(bus_print_child, root_print_child),
KOBJMETHOD(bus_read_ivar, bus_generic_read_ivar),
KOBJMETHOD(bus_write_ivar, bus_generic_write_ivar),
KOBJMETHOD(bus_setup_intr, root_setup_intr),
{ 0, 0 }
};
static driver_t root_driver = {
"root",
root_methods,
1, /* no softc */
};
device_t root_bus;
devclass_t root_devclass;
static int
root_bus_module_handler(module_t mod, int what, void* arg)
{
switch (what) {
case MOD_LOAD:
TAILQ_INIT(&bus_data_devices);
kobj_class_compile((kobj_class_t) &root_driver);
root_bus = make_device(NULL, "root", 0);
root_bus->desc = "System root bus";
kobj_init((kobj_t) root_bus, (kobj_class_t) &root_driver);
root_bus->driver = &root_driver;
root_bus->state = DS_ATTACHED;
root_devclass = devclass_find_internal("root", FALSE);
return (0);
case MOD_SHUTDOWN:
device_shutdown(root_bus);
return (0);
}
return (0);
}
static moduledata_t root_bus_mod = {
"rootbus",
root_bus_module_handler,
0
};
DECLARE_MODULE(rootbus, root_bus_mod, SI_SUB_DRIVERS, SI_ORDER_FIRST);
void
root_bus_configure(void)
{
device_t dev;
PDEBUG(("."));
TAILQ_FOREACH(dev, &root_bus->children, link) {
device_probe_and_attach(dev);
}
}
int
driver_module_handler(module_t mod, int what, void *arg)
{
int error, i;
struct driver_module_data *dmd;
devclass_t bus_devclass;
dmd = (struct driver_module_data *)arg;
bus_devclass = devclass_find_internal(dmd->dmd_busname, TRUE);
error = 0;
switch (what) {
case MOD_LOAD:
if (dmd->dmd_chainevh)
error = dmd->dmd_chainevh(mod,what,dmd->dmd_chainarg);
for (i = 0; !error && i < dmd->dmd_ndrivers; i++) {
PDEBUG(("Loading module: driver %s on bus %s",
DRIVERNAME(dmd->dmd_drivers[i]), dmd->dmd_busname));
error = devclass_add_driver(bus_devclass,
dmd->dmd_drivers[i]);
}
if (error)
break;
/*
* The drivers loaded in this way are assumed to all
* implement the same devclass.
*/
*dmd->dmd_devclass =
devclass_find_internal(dmd->dmd_drivers[0]->name, TRUE);
break;
case MOD_UNLOAD:
for (i = 0; !error && i < dmd->dmd_ndrivers; i++) {
PDEBUG(("Unloading module: driver %s from bus %s",
DRIVERNAME(dmd->dmd_drivers[i]),
dmd->dmd_busname));
error = devclass_delete_driver(bus_devclass,
dmd->dmd_drivers[i]);
}
if (!error && dmd->dmd_chainevh)
error = dmd->dmd_chainevh(mod,what,dmd->dmd_chainarg);
break;
}
return (error);
}
#ifdef BUS_DEBUG
/* the _short versions avoid iteration by not calling anything that prints
* more than oneliners. I love oneliners.
*/
static void
print_device_short(device_t dev, int indent)
{
if (!dev)
return;
indentprintf(("device %d: <%s> %sparent,%schildren,%s%s%s%s,%sivars,%ssoftc,busy=%d\n",
dev->unit, dev->desc,
(dev->parent? "":"no "),
(TAILQ_EMPTY(&dev->children)? "no ":""),
(dev->flags&DF_ENABLED? "enabled,":"disabled,"),
(dev->flags&DF_FIXEDCLASS? "fixed,":""),
(dev->flags&DF_WILDCARD? "wildcard,":""),
(dev->flags&DF_DESCMALLOCED? "descmalloced,":""),
(dev->ivars? "":"no "),
(dev->softc? "":"no "),
dev->busy));
}
static void
print_device(device_t dev, int indent)
{
if (!dev)
return;
print_device_short(dev, indent);
indentprintf(("Parent:\n"));
print_device_short(dev->parent, indent+1);
indentprintf(("Driver:\n"));
print_driver_short(dev->driver, indent+1);
indentprintf(("Devclass:\n"));
print_devclass_short(dev->devclass, indent+1);
}
void
print_device_tree_short(device_t dev, int indent)
/* print the device and all its children (indented) */
{
device_t child;
if (!dev)
return;
print_device_short(dev, indent);
TAILQ_FOREACH(child, &dev->children, link) {
print_device_tree_short(child, indent+1);
}
}
void
print_device_tree(device_t dev, int indent)
/* print the device and all its children (indented) */
{
device_t child;
if (!dev)
return;
print_device(dev, indent);
TAILQ_FOREACH(child, &dev->children, link) {
print_device_tree(child, indent+1);
}
}
static void
print_driver_short(driver_t *driver, int indent)
{
if (!driver)
return;
indentprintf(("driver %s: softc size = %d\n",
driver->name, driver->size));
}
static void
print_driver(driver_t *driver, int indent)
{
if (!driver)
return;
print_driver_short(driver, indent);
}
static void
print_driver_list(driver_list_t drivers, int indent)
{
driverlink_t driver;
TAILQ_FOREACH(driver, &drivers, link) {
print_driver(driver->driver, indent);
}
}
static void
print_devclass_short(devclass_t dc, int indent)
{
if ( !dc )
return;
indentprintf(("devclass %s: max units = %d\n", dc->name, dc->maxunit));
}
static void
print_devclass(devclass_t dc, int indent)
{
int i;
if ( !dc )
return;
print_devclass_short(dc, indent);
indentprintf(("Drivers:\n"));
print_driver_list(dc->drivers, indent+1);
indentprintf(("Devices:\n"));
for (i = 0; i < dc->maxunit; i++)
if (dc->devices[i])
print_device(dc->devices[i], indent+1);
}
void
print_devclass_list_short(void)
{
devclass_t dc;
printf("Short listing of devclasses, drivers & devices:\n");
TAILQ_FOREACH(dc, &devclasses, link) {
print_devclass_short(dc, 0);
}
}
void
print_devclass_list(void)
{
devclass_t dc;
printf("Full listing of devclasses, drivers & devices:\n");
TAILQ_FOREACH(dc, &devclasses, link) {
print_devclass(dc, 0);
}
}
#endif
/*
* User-space access to the device tree.
*
* We implement a small set of nodes:
*
* hw.bus Single integer read method to obtain the
* current generation count.
* hw.bus.devices Reads the entire device tree in flat space.
* hw.bus.rman Resource manager interface
*
* We might like to add the ability to scan devclasses and/or drivers to
* determine what else is currently loaded/available.
*/
SYSCTL_NODE(_hw, OID_AUTO, bus, CTLFLAG_RW, NULL, NULL);
static int
sysctl_bus(SYSCTL_HANDLER_ARGS)
{
struct u_businfo ubus;
ubus.ub_version = BUS_USER_VERSION;
ubus.ub_generation = bus_data_generation;
return (SYSCTL_OUT(req, &ubus, sizeof(ubus)));
}
SYSCTL_NODE(_hw_bus, OID_AUTO, info, CTLFLAG_RW, sysctl_bus,
"bus-related data");
static int
sysctl_devices(SYSCTL_HANDLER_ARGS)
{
int *name = (int *)arg1;
u_int namelen = arg2;
int index;
struct device *dev;
struct u_device udev; /* XXX this is a bit big */
int error;
if (namelen != 2)
return (EINVAL);
if (bus_data_generation_check(name[0]))
return (EINVAL);
index = name[1];
/*
* Scan the list of devices, looking for the requested index.
*/
TAILQ_FOREACH(dev, &bus_data_devices, devlink) {
if (index-- == 0)
break;
}
if (dev == NULL)
return (ENOENT);
/*
* Populate the return array.
*/
udev.dv_handle = (uintptr_t)dev;
udev.dv_parent = (uintptr_t)dev->parent;
if (dev->nameunit == NULL) {
udev.dv_name[0] = 0;
} else {
snprintf(udev.dv_name, 32, "%s", dev->nameunit);
}
if (dev->desc == NULL) {
udev.dv_desc[0] = 0;
} else {
snprintf(udev.dv_desc, 32, "%s", dev->desc);
}
if ((dev->driver == NULL) || (dev->driver->name == NULL)) {
udev.dv_drivername[0] = 0;
} else {
snprintf(udev.dv_drivername, 32, "%s", dev->driver->name);
}
error = SYSCTL_OUT(req, &udev, sizeof(udev));
return (error);
}
SYSCTL_NODE(_hw_bus, OID_AUTO, devices, CTLFLAG_RD, sysctl_devices,
"system device tree");
/*
* Sysctl interface for scanning the resource lists.
*
* We take two input parameters; the index into the list of resource
* managers, and the resource offset into the list.
*/
static int
sysctl_rman(SYSCTL_HANDLER_ARGS)
{
int *name = (int *)arg1;
u_int namelen = arg2;
int rman_idx, res_idx;
struct rman *rm;
struct resource *res;
struct u_rman urm;
struct u_resource ures;
int error;
if (namelen != 3)
return (EINVAL);
if (bus_data_generation_check(name[0]))
return (EINVAL);
rman_idx = name[1];
res_idx = name[2];
/*
* Find the indexed resource manager
*/
TAILQ_FOREACH(rm, &rman_head, rm_link) {
if (rman_idx-- == 0)
break;
}
if (rm == NULL)
return (ENOENT);
/*
* If the resource index is -1, we want details on the
* resource manager.
*/
if (res_idx == -1) {
urm.rm_handle = (uintptr_t)rm;
snprintf(urm.rm_descr, RM_TEXTLEN, "%s", rm->rm_descr);
urm.rm_descr[RM_TEXTLEN - 1] = '\0';
urm.rm_start = rm->rm_start;
urm.rm_size = rm->rm_end - rm->rm_start + 1;
urm.rm_type = rm->rm_type;
error = SYSCTL_OUT(req, &urm, sizeof(urm));
return (error);
}
/*
* Find the indexed resource and return it.
*/
TAILQ_FOREACH(res, &rm->rm_list, r_link) {
if (res_idx-- == 0) {
ures.r_handle = (uintptr_t)res;
ures.r_parent = (uintptr_t)res->r_rm;
ures.r_device = (uintptr_t)res->r_dev;
if (res->r_dev != NULL) {
if (device_get_name(res->r_dev) != NULL) {
snprintf(ures.r_devname, RM_TEXTLEN,
"%s%d",
device_get_name(res->r_dev),
device_get_unit(res->r_dev));
} else {
snprintf(ures.r_devname, RM_TEXTLEN,
"nomatch");
}
} else {
ures.r_devname[0] = 0;
}
ures.r_start = res->r_start;
ures.r_size = res->r_end - res->r_start + 1;
ures.r_flags = res->r_flags;
error = SYSCTL_OUT(req, &ures, sizeof(ures));
return (error);
}
}
return (ENOENT);
}
SYSCTL_NODE(_hw_bus, OID_AUTO, rman, CTLFLAG_RD, sysctl_rman,
"kernel resource manager");
int
bus_data_generation_check(int generation)
{
if (generation != bus_data_generation)
return (1);
/* XXX generate optimised lists here? */
return (0);
}
void
bus_data_generation_update(void)
{
bus_data_generation++;
}