freebsd-nq/sys/net/if_vlan.c

1989 lines
51 KiB
C
Raw Normal View History

/*-
* Copyright 1998 Massachusetts Institute of Technology
* Copyright 2012 ADARA Networks, Inc.
* Copyright 2017 Dell EMC Isilon
*
* Portions of this software were developed by Robert N. M. Watson under
* contract to ADARA Networks, Inc.
*
* Permission to use, copy, modify, and distribute this software and
* its documentation for any purpose and without fee is hereby
* granted, provided that both the above copyright notice and this
* permission notice appear in all copies, that both the above
* copyright notice and this permission notice appear in all
* supporting documentation, and that the name of M.I.T. not be used
* in advertising or publicity pertaining to distribution of the
* software without specific, written prior permission. M.I.T. makes
* no representations about the suitability of this software for any
* purpose. It is provided "as is" without express or implied
* warranty.
*
* THIS SOFTWARE IS PROVIDED BY M.I.T. ``AS IS''. M.I.T. DISCLAIMS
* ALL EXPRESS OR IMPLIED WARRANTIES WITH REGARD TO THIS SOFTWARE,
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT
* SHALL M.I.T. BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* if_vlan.c - pseudo-device driver for IEEE 802.1Q virtual LANs.
* This is sort of sneaky in the implementation, since
* we need to pretend to be enough of an Ethernet implementation
* to make arp work. The way we do this is by telling everyone
* that we are an Ethernet, and then catch the packets that
* ether_output() sends to us via if_transmit(), rewrite them for
* use by the real outgoing interface, and ask it to send them.
*/
2010-02-21 00:07:45 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_inet.h"
2006-01-30 13:45:15 +00:00
#include "opt_vlan.h"
Implement kernel support for hardware rate limited sockets. - Add RATELIMIT kernel configuration keyword which must be set to enable the new functionality. - Add support for hardware driven, Receive Side Scaling, RSS aware, rate limited sendqueues and expose the functionality through the already established SO_MAX_PACING_RATE setsockopt(). The API support rates in the range from 1 to 4Gbytes/s which are suitable for regular TCP and UDP streams. The setsockopt(2) manual page has been updated. - Add rate limit function callback API to "struct ifnet" which supports the following operations: if_snd_tag_alloc(), if_snd_tag_modify(), if_snd_tag_query() and if_snd_tag_free(). - Add support to ifconfig to view, set and clear the IFCAP_TXRTLMT flag, which tells if a network driver supports rate limiting or not. - This patch also adds support for rate limiting through VLAN and LAGG intermediate network devices. - How rate limiting works: 1) The userspace application calls setsockopt() after accepting or making a new connection to set the rate which is then stored in the socket structure in the kernel. Later on when packets are transmitted a check is made in the transmit path for rate changes. A rate change implies a non-blocking ifp->if_snd_tag_alloc() call will be made to the destination network interface, which then sets up a custom sendqueue with the given rate limitation parameter. A "struct m_snd_tag" pointer is returned which serves as a "snd_tag" hint in the m_pkthdr for the subsequently transmitted mbufs. 2) When the network driver sees the "m->m_pkthdr.snd_tag" different from NULL, it will move the packets into a designated rate limited sendqueue given by the snd_tag pointer. It is up to the individual drivers how the rate limited traffic will be rate limited. 3) Route changes are detected by the NIC drivers in the ifp->if_transmit() routine when the ifnet pointer in the incoming snd_tag mismatches the one of the network interface. The network adapter frees the mbuf and returns EAGAIN which causes the ip_output() to release and clear the send tag. Upon next ip_output() a new "snd_tag" will be tried allocated. 4) When the PCB is detached the custom sendqueue will be released by a non-blocking ifp->if_snd_tag_free() call to the currently bound network interface. Reviewed by: wblock (manpages), adrian, gallatin, scottl (network) Differential Revision: https://reviews.freebsd.org/D3687 Sponsored by: Mellanox Technologies MFC after: 3 months
2017-01-18 13:31:17 +00:00
#include "opt_ratelimit.h"
#include <sys/param.h>
#include <sys/eventhandler.h>
#include <sys/kernel.h>
2006-01-30 13:45:15 +00:00
#include <sys/lock.h>
#include <sys/malloc.h>
#include <sys/mbuf.h>
#include <sys/module.h>
#include <sys/rmlock.h>
#include <sys/priv.h>
#include <sys/queue.h>
#include <sys/socket.h>
#include <sys/sockio.h>
#include <sys/sysctl.h>
#include <sys/systm.h>
#include <sys/sx.h>
#include <sys/taskqueue.h>
#include <net/bpf.h>
#include <net/ethernet.h>
#include <net/if.h>
#include <net/if_var.h>
#include <net/if_clone.h>
#include <net/if_dl.h>
#include <net/if_types.h>
#include <net/if_vlan_var.h>
#include <net/vnet.h>
#ifdef INET
#include <netinet/in.h>
#include <netinet/if_ether.h>
#endif
2006-01-30 13:45:15 +00:00
#define VLAN_DEF_HWIDTH 4
#define VLAN_IFFLAGS (IFF_BROADCAST | IFF_MULTICAST)
2006-01-30 13:45:15 +00:00
#define UP_AND_RUNNING(ifp) \
((ifp)->if_flags & IFF_UP && (ifp)->if_drv_flags & IFF_DRV_RUNNING)
2006-01-30 13:45:15 +00:00
LIST_HEAD(ifvlanhead, ifvlan);
struct ifvlantrunk {
struct ifnet *parent; /* parent interface of this trunk */
struct rmlock lock;
2006-01-30 13:45:15 +00:00
#ifdef VLAN_ARRAY
#define VLAN_ARRAY_SIZE (EVL_VLID_MASK + 1)
struct ifvlan *vlans[VLAN_ARRAY_SIZE]; /* static table */
2006-01-30 13:45:15 +00:00
#else
struct ifvlanhead *hash; /* dynamic hash-list table */
uint16_t hmask;
uint16_t hwidth;
#endif
int refcnt;
};
/*
* This macro provides a facility to iterate over every vlan on a trunk with
* the assumption that none will be added/removed during iteration.
*/
#ifdef VLAN_ARRAY
#define VLAN_FOREACH(_ifv, _trunk) \
size_t _i; \
for (_i = 0; _i < VLAN_ARRAY_SIZE; _i++) \
if (((_ifv) = (_trunk)->vlans[_i]) != NULL)
#else /* VLAN_ARRAY */
#define VLAN_FOREACH(_ifv, _trunk) \
struct ifvlan *_next; \
size_t _i; \
for (_i = 0; _i < (1 << (_trunk)->hwidth); _i++) \
LIST_FOREACH_SAFE((_ifv), &(_trunk)->hash[_i], ifv_list, _next)
#endif /* VLAN_ARRAY */
/*
* This macro provides a facility to iterate over every vlan on a trunk while
* also modifying the number of vlans on the trunk. The iteration continues
* until some condition is met or there are no more vlans on the trunk.
*/
#ifdef VLAN_ARRAY
/* The VLAN_ARRAY case is simple -- just a for loop using the condition. */
#define VLAN_FOREACH_UNTIL_SAFE(_ifv, _trunk, _cond) \
size_t _i; \
for (_i = 0; !(_cond) && _i < VLAN_ARRAY_SIZE; _i++) \
if (((_ifv) = (_trunk)->vlans[_i]))
#else /* VLAN_ARRAY */
/*
* The hash table case is more complicated. We allow for the hash table to be
* modified (i.e. vlans removed) while we are iterating over it. To allow for
* this we must restart the iteration every time we "touch" something during
* the iteration, since removal will resize the hash table and invalidate our
* current position. If acting on the touched element causes the trunk to be
* emptied, then iteration also stops.
*/
#define VLAN_FOREACH_UNTIL_SAFE(_ifv, _trunk, _cond) \
size_t _i; \
bool _touch = false; \
for (_i = 0; \
!(_cond) && _i < (1 << (_trunk)->hwidth); \
_i = (_touch && ((_trunk) != NULL) ? 0 : _i + 1), _touch = false) \
if (((_ifv) = LIST_FIRST(&(_trunk)->hash[_i])) != NULL && \
(_touch = true))
#endif /* VLAN_ARRAY */
struct vlan_mc_entry {
struct sockaddr_dl mc_addr;
SLIST_ENTRY(vlan_mc_entry) mc_entries;
};
struct ifvlan {
2006-01-30 13:45:15 +00:00
struct ifvlantrunk *ifv_trunk;
struct ifnet *ifv_ifp;
2006-01-30 13:45:15 +00:00
#define TRUNK(ifv) ((ifv)->ifv_trunk)
#define PARENT(ifv) ((ifv)->ifv_trunk->parent)
void *ifv_cookie;
int ifv_pflags; /* special flags we have set on parent */
int ifv_capenable;
struct ifv_linkmib {
int ifvm_encaplen; /* encapsulation length */
int ifvm_mtufudge; /* MTU fudged by this much */
int ifvm_mintu; /* min transmission unit */
uint16_t ifvm_proto; /* encapsulation ethertype */
2006-01-30 13:45:15 +00:00
uint16_t ifvm_tag; /* tag to apply on packets leaving if */
uint16_t ifvm_vid; /* VLAN ID */
uint8_t ifvm_pcp; /* Priority Code Point (PCP). */
} ifv_mib;
struct task lladdr_task;
SLIST_HEAD(, vlan_mc_entry) vlan_mc_listhead;
#ifndef VLAN_ARRAY
LIST_ENTRY(ifvlan) ifv_list;
#endif
};
#define ifv_proto ifv_mib.ifvm_proto
#define ifv_tag ifv_mib.ifvm_tag
#define ifv_vid ifv_mib.ifvm_vid
#define ifv_pcp ifv_mib.ifvm_pcp
#define ifv_encaplen ifv_mib.ifvm_encaplen
#define ifv_mtufudge ifv_mib.ifvm_mtufudge
#define ifv_mintu ifv_mib.ifvm_mintu
2006-01-30 13:45:15 +00:00
/* Special flags we should propagate to parent. */
static struct {
int flag;
int (*func)(struct ifnet *, int);
} vlan_pflags[] = {
{IFF_PROMISC, ifpromisc},
{IFF_ALLMULTI, if_allmulti},
{0, NULL}
};
extern int vlan_mtag_pcp;
static const char vlanname[] = "vlan";
static MALLOC_DEFINE(M_VLAN, vlanname, "802.1Q Virtual LAN Interface");
static eventhandler_tag ifdetach_tag;
static eventhandler_tag iflladdr_tag;
/*
* if_vlan uses two module-level locks to allow concurrent modification of vlan
* interfaces and (mostly) allow for vlans to be destroyed while they are being
* used for tx/rx. To accomplish this in a way that has acceptable performance
* and cooperation with other parts of the network stack there is a
* non-sleepable rmlock(9) and an sx(9). Both locks are exclusively acquired
* when destroying a vlan interface, i.e. when the if_vlantrunk field of struct
* ifnet is de-allocated and NULL'd. Thus a reader holding either lock has a
* guarantee that the struct ifvlantrunk references a valid vlan trunk.
2006-01-30 13:45:15 +00:00
*
* The performance-sensitive paths that warrant using the rmlock(9) are
* vlan_transmit and vlan_input. Both have to check for the vlan interface's
* existence using if_vlantrunk, and being in the network tx/rx paths the use
* of an rmlock(9) gives a measureable improvement in performance.
*
* The reason for having an sx(9) is mostly because there are still areas that
* must be sleepable and also have safe concurrent access to a vlan interface.
* Since the sx(9) exists, it is used by default in most paths unless sleeping
* is not permitted, or if it is not clear whether sleeping is permitted.
2006-01-30 13:45:15 +00:00
*
* Note that despite these protections, there is still an inherent race in the
* destruction of vlans since there's no guarantee that the ifnet hasn't been
* freed/reused when the tx/rx functions are called by the stack. This can only
* be fixed by addressing ifnet's lifetime issues.
*/
#define _VLAN_RM_ID ifv_rm_lock
#define _VLAN_SX_ID ifv_sx
static struct rmlock _VLAN_RM_ID;
static struct sx _VLAN_SX_ID;
#define VLAN_LOCKING_INIT() \
rm_init(&_VLAN_RM_ID, "vlan_rm"); \
sx_init(&_VLAN_SX_ID, "vlan_sx")
#define VLAN_LOCKING_DESTROY() \
rm_destroy(&_VLAN_RM_ID); \
sx_destroy(&_VLAN_SX_ID)
#define _VLAN_RM_TRACKER _vlan_rm_tracker
#define VLAN_RLOCK() rm_rlock(&_VLAN_RM_ID, \
&_VLAN_RM_TRACKER)
#define VLAN_RUNLOCK() rm_runlock(&_VLAN_RM_ID, \
&_VLAN_RM_TRACKER)
#define VLAN_WLOCK() rm_wlock(&_VLAN_RM_ID)
#define VLAN_WUNLOCK() rm_wunlock(&_VLAN_RM_ID)
#define VLAN_RLOCK_ASSERT() rm_assert(&_VLAN_RM_ID, RA_RLOCKED)
#define VLAN_WLOCK_ASSERT() rm_assert(&_VLAN_RM_ID, RA_WLOCKED)
#define VLAN_RWLOCK_ASSERT() rm_assert(&_VLAN_RM_ID, RA_LOCKED)
#define VLAN_LOCK_READER struct rm_priotracker _VLAN_RM_TRACKER
#define VLAN_SLOCK() sx_slock(&_VLAN_SX_ID)
#define VLAN_SUNLOCK() sx_sunlock(&_VLAN_SX_ID)
#define VLAN_XLOCK() sx_xlock(&_VLAN_SX_ID)
#define VLAN_XUNLOCK() sx_xunlock(&_VLAN_SX_ID)
#define VLAN_SLOCK_ASSERT() sx_assert(&_VLAN_SX_ID, SA_SLOCKED)
#define VLAN_XLOCK_ASSERT() sx_assert(&_VLAN_SX_ID, SA_XLOCKED)
#define VLAN_SXLOCK_ASSERT() sx_assert(&_VLAN_SX_ID, SA_LOCKED)
/*
* We also have a per-trunk rmlock(9), that is locked shared on packet
* processing and exclusive when configuration is changed. Note: This should
* only be acquired while there is a shared lock on either of the global locks
* via VLAN_SLOCK or VLAN_RLOCK. Thus, an exclusive lock on the global locks
* makes a call to TRUNK_RLOCK/TRUNK_WLOCK technically superfluous.
*/
#define _TRUNK_RM_TRACKER _trunk_rm_tracker
#define TRUNK_LOCK_INIT(trunk) rm_init(&(trunk)->lock, vlanname)
#define TRUNK_LOCK_DESTROY(trunk) rm_destroy(&(trunk)->lock)
#define TRUNK_RLOCK(trunk) rm_rlock(&(trunk)->lock, \
&_TRUNK_RM_TRACKER)
#define TRUNK_WLOCK(trunk) rm_wlock(&(trunk)->lock)
#define TRUNK_RUNLOCK(trunk) rm_runlock(&(trunk)->lock, \
&_TRUNK_RM_TRACKER)
#define TRUNK_WUNLOCK(trunk) rm_wunlock(&(trunk)->lock)
#define TRUNK_RLOCK_ASSERT(trunk) rm_assert(&(trunk)->lock, RA_RLOCKED)
#define TRUNK_LOCK_ASSERT(trunk) rm_assert(&(trunk)->lock, RA_LOCKED)
#define TRUNK_WLOCK_ASSERT(trunk) rm_assert(&(trunk)->lock, RA_WLOCKED)
#define TRUNK_LOCK_READER struct rm_priotracker _TRUNK_RM_TRACKER
/*
2006-01-30 13:45:15 +00:00
* The VLAN_ARRAY substitutes the dynamic hash with a static array
2006-08-25 08:25:35 +00:00
* with 4096 entries. In theory this can give a boost in processing,
* however in practice it does not. Probably this is because the array
2006-01-30 13:45:15 +00:00
* is too big to fit into CPU cache.
*/
2006-01-30 13:45:15 +00:00
#ifndef VLAN_ARRAY
static void vlan_inithash(struct ifvlantrunk *trunk);
static void vlan_freehash(struct ifvlantrunk *trunk);
static int vlan_inshash(struct ifvlantrunk *trunk, struct ifvlan *ifv);
static int vlan_remhash(struct ifvlantrunk *trunk, struct ifvlan *ifv);
static void vlan_growhash(struct ifvlantrunk *trunk, int howmuch);
static __inline struct ifvlan * vlan_gethash(struct ifvlantrunk *trunk,
uint16_t vid);
2006-01-30 13:45:15 +00:00
#endif
static void trunk_destroy(struct ifvlantrunk *trunk);
static void vlan_init(void *foo);
static void vlan_input(struct ifnet *ifp, struct mbuf *m);
static int vlan_ioctl(struct ifnet *ifp, u_long cmd, caddr_t addr);
Implement kernel support for hardware rate limited sockets. - Add RATELIMIT kernel configuration keyword which must be set to enable the new functionality. - Add support for hardware driven, Receive Side Scaling, RSS aware, rate limited sendqueues and expose the functionality through the already established SO_MAX_PACING_RATE setsockopt(). The API support rates in the range from 1 to 4Gbytes/s which are suitable for regular TCP and UDP streams. The setsockopt(2) manual page has been updated. - Add rate limit function callback API to "struct ifnet" which supports the following operations: if_snd_tag_alloc(), if_snd_tag_modify(), if_snd_tag_query() and if_snd_tag_free(). - Add support to ifconfig to view, set and clear the IFCAP_TXRTLMT flag, which tells if a network driver supports rate limiting or not. - This patch also adds support for rate limiting through VLAN and LAGG intermediate network devices. - How rate limiting works: 1) The userspace application calls setsockopt() after accepting or making a new connection to set the rate which is then stored in the socket structure in the kernel. Later on when packets are transmitted a check is made in the transmit path for rate changes. A rate change implies a non-blocking ifp->if_snd_tag_alloc() call will be made to the destination network interface, which then sets up a custom sendqueue with the given rate limitation parameter. A "struct m_snd_tag" pointer is returned which serves as a "snd_tag" hint in the m_pkthdr for the subsequently transmitted mbufs. 2) When the network driver sees the "m->m_pkthdr.snd_tag" different from NULL, it will move the packets into a designated rate limited sendqueue given by the snd_tag pointer. It is up to the individual drivers how the rate limited traffic will be rate limited. 3) Route changes are detected by the NIC drivers in the ifp->if_transmit() routine when the ifnet pointer in the incoming snd_tag mismatches the one of the network interface. The network adapter frees the mbuf and returns EAGAIN which causes the ip_output() to release and clear the send tag. Upon next ip_output() a new "snd_tag" will be tried allocated. 4) When the PCB is detached the custom sendqueue will be released by a non-blocking ifp->if_snd_tag_free() call to the currently bound network interface. Reviewed by: wblock (manpages), adrian, gallatin, scottl (network) Differential Revision: https://reviews.freebsd.org/D3687 Sponsored by: Mellanox Technologies MFC after: 3 months
2017-01-18 13:31:17 +00:00
#ifdef RATELIMIT
static int vlan_snd_tag_alloc(struct ifnet *,
union if_snd_tag_alloc_params *, struct m_snd_tag **);
#endif
static void vlan_qflush(struct ifnet *ifp);
static int vlan_setflag(struct ifnet *ifp, int flag, int status,
int (*func)(struct ifnet *, int));
static int vlan_setflags(struct ifnet *ifp, int status);
static int vlan_setmulti(struct ifnet *ifp);
static int vlan_transmit(struct ifnet *ifp, struct mbuf *m);
static void vlan_unconfig(struct ifnet *ifp);
static void vlan_unconfig_locked(struct ifnet *ifp, int departing);
2006-01-30 13:45:15 +00:00
static int vlan_config(struct ifvlan *ifv, struct ifnet *p, uint16_t tag);
static void vlan_link_state(struct ifnet *ifp);
2006-01-30 13:45:15 +00:00
static void vlan_capabilities(struct ifvlan *ifv);
static void vlan_trunk_capabilities(struct ifnet *ifp);
static struct ifnet *vlan_clone_match_ethervid(const char *, int *);
static int vlan_clone_match(struct if_clone *, const char *);
static int vlan_clone_create(struct if_clone *, char *, size_t, caddr_t);
static int vlan_clone_destroy(struct if_clone *, struct ifnet *);
static void vlan_ifdetach(void *arg, struct ifnet *ifp);
static void vlan_iflladdr(void *arg, struct ifnet *ifp);
static void vlan_lladdr_fn(void *arg, int pending);
static struct if_clone *vlan_cloner;
#ifdef VIMAGE
static VNET_DEFINE(struct if_clone *, vlan_cloner);
#define V_vlan_cloner VNET(vlan_cloner)
#endif
2006-01-30 13:45:15 +00:00
#ifndef VLAN_ARRAY
#define HASH(n, m) ((((n) >> 8) ^ ((n) >> 4) ^ (n)) & (m))
2006-01-30 13:45:15 +00:00
static void
vlan_inithash(struct ifvlantrunk *trunk)
{
int i, n;
/*
* The trunk must not be locked here since we call malloc(M_WAITOK).
* It is OK in case this function is called before the trunk struct
* gets hooked up and becomes visible from other threads.
*/
KASSERT(trunk->hwidth == 0 && trunk->hash == NULL,
("%s: hash already initialized", __func__));
trunk->hwidth = VLAN_DEF_HWIDTH;
n = 1 << trunk->hwidth;
trunk->hmask = n - 1;
trunk->hash = malloc(sizeof(struct ifvlanhead) * n, M_VLAN, M_WAITOK);
for (i = 0; i < n; i++)
LIST_INIT(&trunk->hash[i]);
}
static void
vlan_freehash(struct ifvlantrunk *trunk)
{
#ifdef INVARIANTS
int i;
KASSERT(trunk->hwidth > 0, ("%s: hwidth not positive", __func__));
for (i = 0; i < (1 << trunk->hwidth); i++)
KASSERT(LIST_EMPTY(&trunk->hash[i]),
("%s: hash table not empty", __func__));
#endif
free(trunk->hash, M_VLAN);
trunk->hash = NULL;
trunk->hwidth = trunk->hmask = 0;
}
static int
vlan_inshash(struct ifvlantrunk *trunk, struct ifvlan *ifv)
{
int i, b;
struct ifvlan *ifv2;
TRUNK_WLOCK_ASSERT(trunk);
2006-01-30 13:45:15 +00:00
KASSERT(trunk->hwidth > 0, ("%s: hwidth not positive", __func__));
b = 1 << trunk->hwidth;
i = HASH(ifv->ifv_vid, trunk->hmask);
2006-01-30 13:45:15 +00:00
LIST_FOREACH(ifv2, &trunk->hash[i], ifv_list)
if (ifv->ifv_vid == ifv2->ifv_vid)
2006-01-30 13:45:15 +00:00
return (EEXIST);
/*
* Grow the hash when the number of vlans exceeds half of the number of
* hash buckets squared. This will make the average linked-list length
* buckets/2.
*/
if (trunk->refcnt > (b * b) / 2) {
vlan_growhash(trunk, 1);
i = HASH(ifv->ifv_vid, trunk->hmask);
2006-01-30 13:45:15 +00:00
}
LIST_INSERT_HEAD(&trunk->hash[i], ifv, ifv_list);
trunk->refcnt++;
return (0);
}
static int
vlan_remhash(struct ifvlantrunk *trunk, struct ifvlan *ifv)
{
int i, b;
struct ifvlan *ifv2;
TRUNK_WLOCK_ASSERT(trunk);
2006-01-30 13:45:15 +00:00
KASSERT(trunk->hwidth > 0, ("%s: hwidth not positive", __func__));
b = 1 << trunk->hwidth;
i = HASH(ifv->ifv_vid, trunk->hmask);
2006-01-30 13:45:15 +00:00
LIST_FOREACH(ifv2, &trunk->hash[i], ifv_list)
if (ifv2 == ifv) {
trunk->refcnt--;
LIST_REMOVE(ifv2, ifv_list);
if (trunk->refcnt < (b * b) / 2)
vlan_growhash(trunk, -1);
return (0);
}
panic("%s: vlan not found\n", __func__);
return (ENOENT); /*NOTREACHED*/
}
/*
* Grow the hash larger or smaller if memory permits.
*/
static void
vlan_growhash(struct ifvlantrunk *trunk, int howmuch)
{
struct ifvlan *ifv;
struct ifvlanhead *hash2;
int hwidth2, i, j, n, n2;
TRUNK_WLOCK_ASSERT(trunk);
2006-01-30 13:45:15 +00:00
KASSERT(trunk->hwidth > 0, ("%s: hwidth not positive", __func__));
if (howmuch == 0) {
/* Harmless yet obvious coding error */
printf("%s: howmuch is 0\n", __func__);
return;
}
hwidth2 = trunk->hwidth + howmuch;
n = 1 << trunk->hwidth;
n2 = 1 << hwidth2;
/* Do not shrink the table below the default */
if (hwidth2 < VLAN_DEF_HWIDTH)
return;
/* M_NOWAIT because we're called with trunk mutex held */
hash2 = malloc(sizeof(struct ifvlanhead) * n2, M_VLAN, M_NOWAIT);
2006-01-30 13:45:15 +00:00
if (hash2 == NULL) {
printf("%s: out of memory -- hash size not changed\n",
__func__);
return; /* We can live with the old hash table */
}
for (j = 0; j < n2; j++)
LIST_INIT(&hash2[j]);
for (i = 0; i < n; i++)
while ((ifv = LIST_FIRST(&trunk->hash[i])) != NULL) {
2006-01-30 13:45:15 +00:00
LIST_REMOVE(ifv, ifv_list);
j = HASH(ifv->ifv_vid, n2 - 1);
2006-01-30 13:45:15 +00:00
LIST_INSERT_HEAD(&hash2[j], ifv, ifv_list);
}
free(trunk->hash, M_VLAN);
trunk->hash = hash2;
trunk->hwidth = hwidth2;
trunk->hmask = n2 - 1;
if (bootverbose)
if_printf(trunk->parent,
"VLAN hash table resized from %d to %d buckets\n", n, n2);
2006-01-30 13:45:15 +00:00
}
static __inline struct ifvlan *
vlan_gethash(struct ifvlantrunk *trunk, uint16_t vid)
2006-01-30 13:45:15 +00:00
{
struct ifvlan *ifv;
TRUNK_RLOCK_ASSERT(trunk);
2006-01-30 13:45:15 +00:00
LIST_FOREACH(ifv, &trunk->hash[HASH(vid, trunk->hmask)], ifv_list)
if (ifv->ifv_vid == vid)
2006-01-30 13:45:15 +00:00
return (ifv);
return (NULL);
}
#if 0
/* Debugging code to view the hashtables. */
static void
vlan_dumphash(struct ifvlantrunk *trunk)
{
int i;
struct ifvlan *ifv;
for (i = 0; i < (1 << trunk->hwidth); i++) {
printf("%d: ", i);
LIST_FOREACH(ifv, &trunk->hash[i], ifv_list)
printf("%s ", ifv->ifv_ifp->if_xname);
printf("\n");
}
}
#endif /* 0 */
#else
static __inline struct ifvlan *
vlan_gethash(struct ifvlantrunk *trunk, uint16_t vid)
{
return trunk->vlans[vid];
}
static __inline int
vlan_inshash(struct ifvlantrunk *trunk, struct ifvlan *ifv)
{
if (trunk->vlans[ifv->ifv_vid] != NULL)
return EEXIST;
trunk->vlans[ifv->ifv_vid] = ifv;
trunk->refcnt++;
return (0);
}
static __inline int
vlan_remhash(struct ifvlantrunk *trunk, struct ifvlan *ifv)
{
trunk->vlans[ifv->ifv_vid] = NULL;
trunk->refcnt--;
return (0);
}
static __inline void
vlan_freehash(struct ifvlantrunk *trunk)
{
}
static __inline void
vlan_inithash(struct ifvlantrunk *trunk)
{
}
2006-01-30 13:45:15 +00:00
#endif /* !VLAN_ARRAY */
static void
trunk_destroy(struct ifvlantrunk *trunk)
{
VLAN_XLOCK_ASSERT();
VLAN_WLOCK_ASSERT();
2006-01-30 13:45:15 +00:00
vlan_freehash(trunk);
trunk->parent->if_vlantrunk = NULL;
TRUNK_LOCK_DESTROY(trunk);
if_rele(trunk->parent);
2006-01-30 13:45:15 +00:00
free(trunk, M_VLAN);
}
/*
* Program our multicast filter. What we're actually doing is
* programming the multicast filter of the parent. This has the
* side effect of causing the parent interface to receive multicast
* traffic that it doesn't really want, which ends up being discarded
* later by the upper protocol layers. Unfortunately, there's no way
* to avoid this: there really is only one physical interface.
*/
static int
vlan_setmulti(struct ifnet *ifp)
{
struct ifnet *ifp_p;
struct ifmultiaddr *ifma;
struct ifvlan *sc;
struct vlan_mc_entry *mc;
int error;
/*
* XXX This stupidly needs the rmlock to avoid sleeping while holding
* the in6_multi_mtx (see in6_mc_join_locked).
*/
VLAN_RWLOCK_ASSERT();
/* Find the parent. */
sc = ifp->if_softc;
TRUNK_WLOCK_ASSERT(TRUNK(sc));
2006-01-30 13:45:15 +00:00
ifp_p = PARENT(sc);
CURVNET_SET_QUIET(ifp_p->if_vnet);
/* First, remove any existing filter entries. */
while ((mc = SLIST_FIRST(&sc->vlan_mc_listhead)) != NULL) {
SLIST_REMOVE_HEAD(&sc->vlan_mc_listhead, mc_entries);
(void)if_delmulti(ifp_p, (struct sockaddr *)&mc->mc_addr);
free(mc, M_VLAN);
}
/* Now program new ones. */
IF_ADDR_WLOCK(ifp);
ifnet: Replace if_addr_lock rwlock with epoch + mutex Run on LLNW canaries and tested by pho@ gallatin: Using a 14-core, 28-HTT single socket E5-2697 v3 with a 40GbE MLX5 based ConnectX 4-LX NIC, I see an almost 12% improvement in received packet rate, and a larger improvement in bytes delivered all the way to userspace. When the host receiving 64 streams of netperf -H $DUT -t UDP_STREAM -- -m 1, I see, using nstat -I mce0 1 before the patch: InMpps OMpps InGbs OGbs err TCP Est %CPU syscalls csw irq GBfree 4.98 0.00 4.42 0.00 4235592 33 83.80 4720653 2149771 1235 247.32 4.73 0.00 4.20 0.00 4025260 33 82.99 4724900 2139833 1204 247.32 4.72 0.00 4.20 0.00 4035252 33 82.14 4719162 2132023 1264 247.32 4.71 0.00 4.21 0.00 4073206 33 83.68 4744973 2123317 1347 247.32 4.72 0.00 4.21 0.00 4061118 33 80.82 4713615 2188091 1490 247.32 4.72 0.00 4.21 0.00 4051675 33 85.29 4727399 2109011 1205 247.32 4.73 0.00 4.21 0.00 4039056 33 84.65 4724735 2102603 1053 247.32 After the patch InMpps OMpps InGbs OGbs err TCP Est %CPU syscalls csw irq GBfree 5.43 0.00 4.20 0.00 3313143 33 84.96 5434214 1900162 2656 245.51 5.43 0.00 4.20 0.00 3308527 33 85.24 5439695 1809382 2521 245.51 5.42 0.00 4.19 0.00 3316778 33 87.54 5416028 1805835 2256 245.51 5.42 0.00 4.19 0.00 3317673 33 90.44 5426044 1763056 2332 245.51 5.42 0.00 4.19 0.00 3314839 33 88.11 5435732 1792218 2499 245.52 5.44 0.00 4.19 0.00 3293228 33 91.84 5426301 1668597 2121 245.52 Similarly, netperf reports 230Mb/s before the patch, and 270Mb/s after the patch Reviewed by: gallatin Sponsored by: Limelight Networks Differential Revision: https://reviews.freebsd.org/D15366
2018-05-18 20:13:34 +00:00
CK_STAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
if (ifma->ifma_addr->sa_family != AF_LINK)
continue;
mc = malloc(sizeof(struct vlan_mc_entry), M_VLAN, M_NOWAIT);
if (mc == NULL) {
IF_ADDR_WUNLOCK(ifp);
return (ENOMEM);
}
bcopy(ifma->ifma_addr, &mc->mc_addr, ifma->ifma_addr->sa_len);
mc->mc_addr.sdl_index = ifp_p->if_index;
SLIST_INSERT_HEAD(&sc->vlan_mc_listhead, mc, mc_entries);
}
IF_ADDR_WUNLOCK(ifp);
SLIST_FOREACH (mc, &sc->vlan_mc_listhead, mc_entries) {
error = if_addmulti(ifp_p, (struct sockaddr *)&mc->mc_addr,
NULL);
if (error)
return (error);
}
CURVNET_RESTORE();
return (0);
}
/*
* A handler for parent interface link layer address changes.
* If the parent interface link layer address is changed we
* should also change it on all children vlans.
*/
static void
vlan_iflladdr(void *arg __unused, struct ifnet *ifp)
{
struct ifvlan *ifv;
struct ifnet *ifv_ifp;
struct ifvlantrunk *trunk;
struct sockaddr_dl *sdl;
VLAN_LOCK_READER;
/* Need the rmlock since this is run on taskqueue_swi. */
VLAN_RLOCK();
trunk = ifp->if_vlantrunk;
if (trunk == NULL) {
VLAN_RUNLOCK();
return;
}
/*
* OK, it's a trunk. Loop over and change all vlan's lladdrs on it.
* We need an exclusive lock here to prevent concurrent SIOCSIFLLADDR
* ioctl calls on the parent garbling the lladdr of the child vlan.
*/
TRUNK_WLOCK(trunk);
VLAN_FOREACH(ifv, trunk) {
/*
* Copy new new lladdr into the ifv_ifp, enqueue a task
* to actually call if_setlladdr. if_setlladdr needs to
* be deferred to a taskqueue because it will call into
* the if_vlan ioctl path and try to acquire the global
* lock.
*/
ifv_ifp = ifv->ifv_ifp;
bcopy(IF_LLADDR(ifp), IF_LLADDR(ifv_ifp),
ifp->if_addrlen);
sdl = (struct sockaddr_dl *)ifv_ifp->if_addr->ifa_addr;
sdl->sdl_alen = ifp->if_addrlen;
taskqueue_enqueue(taskqueue_thread, &ifv->lladdr_task);
}
TRUNK_WUNLOCK(trunk);
VLAN_RUNLOCK();
}
/*
* A handler for network interface departure events.
* Track departure of trunks here so that we don't access invalid
* pointers or whatever if a trunk is ripped from under us, e.g.,
* by ejecting its hot-plug card. However, if an ifnet is simply
* being renamed, then there's no need to tear down the state.
*/
static void
vlan_ifdetach(void *arg __unused, struct ifnet *ifp)
{
struct ifvlan *ifv;
struct ifvlantrunk *trunk;
/* If the ifnet is just being renamed, don't do anything. */
if (ifp->if_flags & IFF_RENAMING)
return;
VLAN_XLOCK();
trunk = ifp->if_vlantrunk;
if (trunk == NULL) {
VLAN_XUNLOCK();
return;
}
/*
* OK, it's a trunk. Loop over and detach all vlan's on it.
* Check trunk pointer after each vlan_unconfig() as it will
* free it and set to NULL after the last vlan was detached.
*/
VLAN_FOREACH_UNTIL_SAFE(ifv, ifp->if_vlantrunk,
ifp->if_vlantrunk == NULL)
vlan_unconfig_locked(ifv->ifv_ifp, 1);
/* Trunk should have been destroyed in vlan_unconfig(). */
KASSERT(ifp->if_vlantrunk == NULL, ("%s: purge failed", __func__));
VLAN_XUNLOCK();
}
/*
* Return the trunk device for a virtual interface.
*/
static struct ifnet *
vlan_trunkdev(struct ifnet *ifp)
{
struct ifvlan *ifv;
VLAN_LOCK_READER;
if (ifp->if_type != IFT_L2VLAN)
return (NULL);
/* Not clear if callers are sleepable, so acquire the rmlock. */
VLAN_RLOCK();
ifv = ifp->if_softc;
ifp = NULL;
if (ifv->ifv_trunk)
ifp = PARENT(ifv);
VLAN_RUNLOCK();
return (ifp);
}
/*
* Return the 12-bit VLAN VID for this interface, for use by external
* components such as Infiniband.
*
* XXXRW: Note that the function name here is historical; it should be named
* vlan_vid().
*/
static int
vlan_tag(struct ifnet *ifp, uint16_t *vidp)
{
struct ifvlan *ifv;
if (ifp->if_type != IFT_L2VLAN)
return (EINVAL);
ifv = ifp->if_softc;
*vidp = ifv->ifv_vid;
return (0);
}
/*
* Return a driver specific cookie for this interface. Synchronization
* with setcookie must be provided by the driver.
*/
static void *
vlan_cookie(struct ifnet *ifp)
{
struct ifvlan *ifv;
if (ifp->if_type != IFT_L2VLAN)
return (NULL);
ifv = ifp->if_softc;
return (ifv->ifv_cookie);
}
/*
* Store a cookie in our softc that drivers can use to store driver
* private per-instance data in.
*/
static int
vlan_setcookie(struct ifnet *ifp, void *cookie)
{
struct ifvlan *ifv;
if (ifp->if_type != IFT_L2VLAN)
return (EINVAL);
ifv = ifp->if_softc;
ifv->ifv_cookie = cookie;
return (0);
}
/*
* Return the vlan device present at the specific VID.
*/
static struct ifnet *
vlan_devat(struct ifnet *ifp, uint16_t vid)
{
struct ifvlantrunk *trunk;
struct ifvlan *ifv;
VLAN_LOCK_READER;
TRUNK_LOCK_READER;
/* Not clear if callers are sleepable, so acquire the rmlock. */
VLAN_RLOCK();
trunk = ifp->if_vlantrunk;
if (trunk == NULL) {
VLAN_RUNLOCK();
return (NULL);
}
ifp = NULL;
TRUNK_RLOCK(trunk);
ifv = vlan_gethash(trunk, vid);
if (ifv)
ifp = ifv->ifv_ifp;
TRUNK_RUNLOCK(trunk);
VLAN_RUNLOCK();
return (ifp);
}
/*
* Recalculate the cached VLAN tag exposed via the MIB.
*/
static void
vlan_tag_recalculate(struct ifvlan *ifv)
{
ifv->ifv_tag = EVL_MAKETAG(ifv->ifv_vid, ifv->ifv_pcp, 0);
}
/*
* VLAN support can be loaded as a module. The only place in the
* system that's intimately aware of this is ether_input. We hook
* into this code through vlan_input_p which is defined there and
* set here. No one else in the system should be aware of this so
* we use an explicit reference here.
*/
extern void (*vlan_input_p)(struct ifnet *, struct mbuf *);
/* For if_link_state_change() eyes only... */
extern void (*vlan_link_state_p)(struct ifnet *);
static int
vlan_modevent(module_t mod, int type, void *data)
{
switch (type) {
case MOD_LOAD:
ifdetach_tag = EVENTHANDLER_REGISTER(ifnet_departure_event,
vlan_ifdetach, NULL, EVENTHANDLER_PRI_ANY);
if (ifdetach_tag == NULL)
return (ENOMEM);
iflladdr_tag = EVENTHANDLER_REGISTER(iflladdr_event,
vlan_iflladdr, NULL, EVENTHANDLER_PRI_ANY);
if (iflladdr_tag == NULL)
return (ENOMEM);
VLAN_LOCKING_INIT();
vlan_input_p = vlan_input;
vlan_link_state_p = vlan_link_state;
2006-01-30 13:45:15 +00:00
vlan_trunk_cap_p = vlan_trunk_capabilities;
vlan_trunkdev_p = vlan_trunkdev;
vlan_cookie_p = vlan_cookie;
vlan_setcookie_p = vlan_setcookie;
vlan_tag_p = vlan_tag;
vlan_devat_p = vlan_devat;
#ifndef VIMAGE
vlan_cloner = if_clone_advanced(vlanname, 0, vlan_clone_match,
vlan_clone_create, vlan_clone_destroy);
#endif
if (bootverbose)
printf("vlan: initialized, using "
#ifdef VLAN_ARRAY
"full-size arrays"
#else
"hash tables with chaining"
#endif
"\n");
break;
case MOD_UNLOAD:
#ifndef VIMAGE
if_clone_detach(vlan_cloner);
#endif
EVENTHANDLER_DEREGISTER(ifnet_departure_event, ifdetach_tag);
EVENTHANDLER_DEREGISTER(iflladdr_event, iflladdr_tag);
vlan_input_p = NULL;
vlan_link_state_p = NULL;
2006-01-30 13:45:15 +00:00
vlan_trunk_cap_p = NULL;
vlan_trunkdev_p = NULL;
vlan_tag_p = NULL;
vlan_cookie_p = NULL;
vlan_setcookie_p = NULL;
vlan_devat_p = NULL;
VLAN_LOCKING_DESTROY();
if (bootverbose)
printf("vlan: unloaded\n");
break;
default:
return (EOPNOTSUPP);
}
return (0);
}
static moduledata_t vlan_mod = {
"if_vlan",
vlan_modevent,
0
};
DECLARE_MODULE(if_vlan, vlan_mod, SI_SUB_PSEUDO, SI_ORDER_ANY);
MODULE_VERSION(if_vlan, 3);
#ifdef VIMAGE
static void
vnet_vlan_init(const void *unused __unused)
{
vlan_cloner = if_clone_advanced(vlanname, 0, vlan_clone_match,
vlan_clone_create, vlan_clone_destroy);
V_vlan_cloner = vlan_cloner;
}
VNET_SYSINIT(vnet_vlan_init, SI_SUB_PROTO_IFATTACHDOMAIN, SI_ORDER_ANY,
vnet_vlan_init, NULL);
static void
vnet_vlan_uninit(const void *unused __unused)
{
if_clone_detach(V_vlan_cloner);
}
Get closer to a VIMAGE network stack teardown from top to bottom rather than removing the network interfaces first. This change is rather larger and convoluted as the ordering requirements cannot be separated. Move the pfil(9) framework to SI_SUB_PROTO_PFIL, move Firewalls and related modules to their own SI_SUB_PROTO_FIREWALL. Move initialization of "physical" interfaces to SI_SUB_DRIVERS, move virtual (cloned) interfaces to SI_SUB_PSEUDO. Move Multicast to SI_SUB_PROTO_MC. Re-work parts of multicast initialisation and teardown, not taking the huge amount of memory into account if used as a module yet. For interface teardown we try to do as many of them as we can on SI_SUB_INIT_IF, but for some this makes no sense, e.g., when tunnelling over a higher layer protocol such as IP. In that case the interface has to go along (or before) the higher layer protocol is shutdown. Kernel hhooks need to go last on teardown as they may be used at various higher layers and we cannot remove them before we cleaned up the higher layers. For interface teardown there are multiple paths: (a) a cloned interface is destroyed (inside a VIMAGE or in the base system), (b) any interface is moved from a virtual network stack to a different network stack ("vmove"), or (c) a virtual network stack is being shut down. All code paths go through if_detach_internal() where we, depending on the vmove flag or the vnet state, make a decision on how much to shut down; in case we are destroying a VNET the individual protocol layers will cleanup their own parts thus we cannot do so again for each interface as we end up with, e.g., double-frees, destroying locks twice or acquiring already destroyed locks. When calling into protocol cleanups we equally have to tell them whether they need to detach upper layer protocols ("ulp") or not (e.g., in6_ifdetach()). Provide or enahnce helper functions to do proper cleanup at a protocol rather than at an interface level. Approved by: re (hrs) Obtained from: projects/vnet Reviewed by: gnn, jhb Sponsored by: The FreeBSD Foundation MFC after: 2 weeks Differential Revision: https://reviews.freebsd.org/D6747
2016-06-21 13:48:49 +00:00
VNET_SYSUNINIT(vnet_vlan_uninit, SI_SUB_INIT_IF, SI_ORDER_FIRST,
vnet_vlan_uninit, NULL);
#endif
/*
* Check for <etherif>.<vlan> style interface names.
*/
static struct ifnet *
vlan_clone_match_ethervid(const char *name, int *vidp)
{
char ifname[IFNAMSIZ];
char *cp;
struct ifnet *ifp;
int vid;
strlcpy(ifname, name, IFNAMSIZ);
if ((cp = strchr(ifname, '.')) == NULL)
return (NULL);
*cp = '\0';
if ((ifp = ifunit_ref(ifname)) == NULL)
return (NULL);
/* Parse VID. */
if (*++cp == '\0') {
if_rele(ifp);
return (NULL);
}
vid = 0;
for(; *cp >= '0' && *cp <= '9'; cp++)
vid = (vid * 10) + (*cp - '0');
if (*cp != '\0') {
if_rele(ifp);
return (NULL);
}
if (vidp != NULL)
*vidp = vid;
return (ifp);
}
static int
vlan_clone_match(struct if_clone *ifc, const char *name)
{
const char *cp;
if (vlan_clone_match_ethervid(name, NULL) != NULL)
return (1);
if (strncmp(vlanname, name, strlen(vlanname)) != 0)
return (0);
for (cp = name + 4; *cp != '\0'; cp++) {
if (*cp < '0' || *cp > '9')
return (0);
}
return (1);
}
static int
vlan_clone_create(struct if_clone *ifc, char *name, size_t len, caddr_t params)
{
char *dp;
int wildcard;
int unit;
int error;
int vid;
struct ifvlan *ifv;
struct ifnet *ifp;
struct ifnet *p;
struct ifaddr *ifa;
struct sockaddr_dl *sdl;
struct vlanreq vlr;
static const u_char eaddr[ETHER_ADDR_LEN]; /* 00:00:00:00:00:00 */
/*
* There are 3 (ugh) ways to specify the cloned device:
* o pass a parameter block with the clone request.
* o specify parameters in the text of the clone device name
* o specify no parameters and get an unattached device that
* must be configured separately.
* The first technique is preferred; the latter two are
* supported for backwards compatibility.
*
* XXXRW: Note historic use of the word "tag" here. New ioctls may be
* called for.
*/
if (params) {
error = copyin(params, &vlr, sizeof(vlr));
if (error)
return error;
p = ifunit_ref(vlr.vlr_parent);
if (p == NULL)
return (ENXIO);
error = ifc_name2unit(name, &unit);
if (error != 0) {
if_rele(p);
return (error);
}
vid = vlr.vlr_tag;
wildcard = (unit < 0);
} else if ((p = vlan_clone_match_ethervid(name, &vid)) != NULL) {
unit = -1;
wildcard = 0;
} else {
p = NULL;
error = ifc_name2unit(name, &unit);
if (error != 0)
return (error);
wildcard = (unit < 0);
}
error = ifc_alloc_unit(ifc, &unit);
if (error != 0) {
if (p != NULL)
if_rele(p);
return (error);
}
/* In the wildcard case, we need to update the name. */
if (wildcard) {
for (dp = name; *dp != '\0'; dp++);
if (snprintf(dp, len - (dp-name), "%d", unit) >
len - (dp-name) - 1) {
panic("%s: interface name too long", __func__);
}
}
ifv = malloc(sizeof(struct ifvlan), M_VLAN, M_WAITOK | M_ZERO);
ifp = ifv->ifv_ifp = if_alloc(IFT_ETHER);
if (ifp == NULL) {
ifc_free_unit(ifc, unit);
free(ifv, M_VLAN);
if (p != NULL)
if_rele(p);
return (ENOSPC);
}
SLIST_INIT(&ifv->vlan_mc_listhead);
ifp->if_softc = ifv;
/*
2005-01-24 15:48:00 +00:00
* Set the name manually rather than using if_initname because
* we don't conform to the default naming convention for interfaces.
*/
strlcpy(ifp->if_xname, name, IFNAMSIZ);
ifp->if_dname = vlanname;
ifp->if_dunit = unit;
/* NB: flags are not set here */
ifp->if_linkmib = &ifv->ifv_mib;
ifp->if_linkmiblen = sizeof(ifv->ifv_mib);
/* NB: mtu is not set here */
ifp->if_init = vlan_init;
ifp->if_transmit = vlan_transmit;
ifp->if_qflush = vlan_qflush;
ifp->if_ioctl = vlan_ioctl;
Implement kernel support for hardware rate limited sockets. - Add RATELIMIT kernel configuration keyword which must be set to enable the new functionality. - Add support for hardware driven, Receive Side Scaling, RSS aware, rate limited sendqueues and expose the functionality through the already established SO_MAX_PACING_RATE setsockopt(). The API support rates in the range from 1 to 4Gbytes/s which are suitable for regular TCP and UDP streams. The setsockopt(2) manual page has been updated. - Add rate limit function callback API to "struct ifnet" which supports the following operations: if_snd_tag_alloc(), if_snd_tag_modify(), if_snd_tag_query() and if_snd_tag_free(). - Add support to ifconfig to view, set and clear the IFCAP_TXRTLMT flag, which tells if a network driver supports rate limiting or not. - This patch also adds support for rate limiting through VLAN and LAGG intermediate network devices. - How rate limiting works: 1) The userspace application calls setsockopt() after accepting or making a new connection to set the rate which is then stored in the socket structure in the kernel. Later on when packets are transmitted a check is made in the transmit path for rate changes. A rate change implies a non-blocking ifp->if_snd_tag_alloc() call will be made to the destination network interface, which then sets up a custom sendqueue with the given rate limitation parameter. A "struct m_snd_tag" pointer is returned which serves as a "snd_tag" hint in the m_pkthdr for the subsequently transmitted mbufs. 2) When the network driver sees the "m->m_pkthdr.snd_tag" different from NULL, it will move the packets into a designated rate limited sendqueue given by the snd_tag pointer. It is up to the individual drivers how the rate limited traffic will be rate limited. 3) Route changes are detected by the NIC drivers in the ifp->if_transmit() routine when the ifnet pointer in the incoming snd_tag mismatches the one of the network interface. The network adapter frees the mbuf and returns EAGAIN which causes the ip_output() to release and clear the send tag. Upon next ip_output() a new "snd_tag" will be tried allocated. 4) When the PCB is detached the custom sendqueue will be released by a non-blocking ifp->if_snd_tag_free() call to the currently bound network interface. Reviewed by: wblock (manpages), adrian, gallatin, scottl (network) Differential Revision: https://reviews.freebsd.org/D3687 Sponsored by: Mellanox Technologies MFC after: 3 months
2017-01-18 13:31:17 +00:00
#ifdef RATELIMIT
ifp->if_snd_tag_alloc = vlan_snd_tag_alloc;
#endif
ifp->if_flags = VLAN_IFFLAGS;
ether_ifattach(ifp, eaddr);
/* Now undo some of the damage... */
ifp->if_baudrate = 0;
ifp->if_type = IFT_L2VLAN;
ifp->if_hdrlen = ETHER_VLAN_ENCAP_LEN;
ifa = ifp->if_addr;
sdl = (struct sockaddr_dl *)ifa->ifa_addr;
sdl->sdl_type = IFT_L2VLAN;
if (p != NULL) {
error = vlan_config(ifv, p, vid);
if_rele(p);
if (error != 0) {
/*
* Since we've partially failed, we need to back
* out all the way, otherwise userland could get
* confused. Thus, we destroy the interface.
*/
ether_ifdetach(ifp);
vlan_unconfig(ifp);
if_free(ifp);
ifc_free_unit(ifc, unit);
free(ifv, M_VLAN);
return (error);
}
}
return (0);
}
static int
vlan_clone_destroy(struct if_clone *ifc, struct ifnet *ifp)
{
struct ifvlan *ifv = ifp->if_softc;
int unit = ifp->if_dunit;
ether_ifdetach(ifp); /* first, remove it from system-wide lists */
vlan_unconfig(ifp); /* now it can be unconfigured and freed */
/*
* We should have the only reference to the ifv now, so we can now
* drain any remaining lladdr task before freeing the ifnet and the
* ifvlan.
*/
taskqueue_drain(taskqueue_thread, &ifv->lladdr_task);
if_free(ifp);
free(ifv, M_VLAN);
ifc_free_unit(ifc, unit);
return (0);
}
/*
* The ifp->if_init entry point for vlan(4) is a no-op.
*/
static void
vlan_init(void *foo __unused)
{
}
/*
* The if_transmit method for vlan(4) interface.
*/
static int
vlan_transmit(struct ifnet *ifp, struct mbuf *m)
{
struct ifvlan *ifv;
struct ifnet *p;
int error, len, mcast;
VLAN_LOCK_READER;
VLAN_RLOCK();
ifv = ifp->if_softc;
if (TRUNK(ifv) == NULL) {
if_inc_counter(ifp, IFCOUNTER_OERRORS, 1);
VLAN_RUNLOCK();
m_freem(m);
return (ENETDOWN);
}
2006-01-30 13:45:15 +00:00
p = PARENT(ifv);
len = m->m_pkthdr.len;
mcast = (m->m_flags & (M_MCAST | M_BCAST)) ? 1 : 0;
BPF_MTAP(ifp, m);
/*
* Do not run parent's if_transmit() if the parent is not up,
* or parent's driver will cause a system crash.
*/
if (!UP_AND_RUNNING(p)) {
if_inc_counter(ifp, IFCOUNTER_OERRORS, 1);
VLAN_RUNLOCK();
m_freem(m);
return (ENETDOWN);
}
if (!ether_8021q_frame(&m, ifp, p, ifv->ifv_vid, ifv->ifv_pcp)) {
if_inc_counter(ifp, IFCOUNTER_OERRORS, 1);
VLAN_RUNLOCK();
return (0);
}
/*
* Send it, precisely as ether_output() would have.
*/
error = (p->if_transmit)(p, m);
if (error == 0) {
if_inc_counter(ifp, IFCOUNTER_OPACKETS, 1);
if_inc_counter(ifp, IFCOUNTER_OBYTES, len);
if_inc_counter(ifp, IFCOUNTER_OMCASTS, mcast);
} else
if_inc_counter(ifp, IFCOUNTER_OERRORS, 1);
VLAN_RUNLOCK();
return (error);
}
/*
* The ifp->if_qflush entry point for vlan(4) is a no-op.
*/
static void
vlan_qflush(struct ifnet *ifp __unused)
{
}
static void
vlan_input(struct ifnet *ifp, struct mbuf *m)
{
struct ifvlantrunk *trunk;
struct ifvlan *ifv;
VLAN_LOCK_READER;
TRUNK_LOCK_READER;
struct m_tag *mtag;
uint16_t vid, tag;
2006-01-30 13:45:15 +00:00
VLAN_RLOCK();
trunk = ifp->if_vlantrunk;
if (trunk == NULL) {
VLAN_RUNLOCK();
m_freem(m);
return;
}
if (m->m_flags & M_VLANTAG) {
/*
* Packet is tagged, but m contains a normal
* Ethernet frame; the tag is stored out-of-band.
*/
tag = m->m_pkthdr.ether_vtag;
m->m_flags &= ~M_VLANTAG;
} else {
2006-01-30 13:45:15 +00:00
struct ether_vlan_header *evl;
/*
* Packet is tagged in-band as specified by 802.1q.
*/
switch (ifp->if_type) {
case IFT_ETHER:
if (m->m_len < sizeof(*evl) &&
(m = m_pullup(m, sizeof(*evl))) == NULL) {
if_printf(ifp, "cannot pullup VLAN header\n");
VLAN_RUNLOCK();
return;
}
evl = mtod(m, struct ether_vlan_header *);
tag = ntohs(evl->evl_tag);
/*
* Remove the 802.1q header by copying the Ethernet
* addresses over it and adjusting the beginning of
* the data in the mbuf. The encapsulated Ethernet
* type field is already in place.
*/
bcopy((char *)evl, (char *)evl + ETHER_VLAN_ENCAP_LEN,
ETHER_HDR_LEN - ETHER_TYPE_LEN);
m_adj(m, ETHER_VLAN_ENCAP_LEN);
break;
default:
#ifdef INVARIANTS
panic("%s: %s has unsupported if_type %u",
__func__, ifp->if_xname, ifp->if_type);
#endif
if_inc_counter(ifp, IFCOUNTER_NOPROTO, 1);
VLAN_RUNLOCK();
m_freem(m);
return;
}
}
vid = EVL_VLANOFTAG(tag);
TRUNK_RLOCK(trunk);
ifv = vlan_gethash(trunk, vid);
if (ifv == NULL || !UP_AND_RUNNING(ifv->ifv_ifp)) {
2006-01-30 13:45:15 +00:00
TRUNK_RUNLOCK(trunk);
if_inc_counter(ifp, IFCOUNTER_NOPROTO, 1);
VLAN_RUNLOCK();
m_freem(m);
2006-01-30 13:45:15 +00:00
return;
}
TRUNK_RUNLOCK(trunk);
if (vlan_mtag_pcp) {
/*
* While uncommon, it is possible that we will find a 802.1q
* packet encapsulated inside another packet that also had an
* 802.1q header. For example, ethernet tunneled over IPSEC
* arriving over ethernet. In that case, we replace the
* existing 802.1q PCP m_tag value.
*/
mtag = m_tag_locate(m, MTAG_8021Q, MTAG_8021Q_PCP_IN, NULL);
if (mtag == NULL) {
mtag = m_tag_alloc(MTAG_8021Q, MTAG_8021Q_PCP_IN,
sizeof(uint8_t), M_NOWAIT);
if (mtag == NULL) {
if_inc_counter(ifp, IFCOUNTER_IERRORS, 1);
VLAN_RUNLOCK();
m_freem(m);
return;
}
m_tag_prepend(m, mtag);
}
*(uint8_t *)(mtag + 1) = EVL_PRIOFTAG(tag);
}
m->m_pkthdr.rcvif = ifv->ifv_ifp;
if_inc_counter(ifv->ifv_ifp, IFCOUNTER_IPACKETS, 1);
VLAN_RUNLOCK();
/* Pass it back through the parent's input routine. */
(*ifv->ifv_ifp->if_input)(ifv->ifv_ifp, m);
}
static void
vlan_lladdr_fn(void *arg, int pending __unused)
{
struct ifvlan *ifv;
struct ifnet *ifp;
ifv = (struct ifvlan *)arg;
ifp = ifv->ifv_ifp;
/* The ifv_ifp already has the lladdr copied in. */
if_setlladdr(ifp, IF_LLADDR(ifp), ifp->if_addrlen);
}
static int
vlan_config(struct ifvlan *ifv, struct ifnet *p, uint16_t vid)
{
2006-01-30 13:45:15 +00:00
struct ifvlantrunk *trunk;
struct ifnet *ifp;
2006-01-30 13:45:15 +00:00
int error = 0;
/*
* We can handle non-ethernet hardware types as long as
* they handle the tagging and headers themselves.
*/
if (p->if_type != IFT_ETHER &&
(p->if_capenable & IFCAP_VLAN_HWTAGGING) == 0)
return (EPROTONOSUPPORT);
if ((p->if_flags & VLAN_IFFLAGS) != VLAN_IFFLAGS)
return (EPROTONOSUPPORT);
/*
* Don't let the caller set up a VLAN VID with
* anything except VLID bits.
* VID numbers 0x0 and 0xFFF are reserved.
*/
if (vid == 0 || vid == 0xFFF || (vid & ~EVL_VLID_MASK))
return (EINVAL);
2006-01-30 13:45:15 +00:00
if (ifv->ifv_trunk)
return (EBUSY);
/* Acquire rmlock after the branch so we can M_WAITOK. */
VLAN_XLOCK();
2006-01-30 13:45:15 +00:00
if (p->if_vlantrunk == NULL) {
trunk = malloc(sizeof(struct ifvlantrunk),
M_VLAN, M_WAITOK | M_ZERO);
vlan_inithash(trunk);
2006-01-30 13:45:15 +00:00
TRUNK_LOCK_INIT(trunk);
VLAN_WLOCK();
TRUNK_WLOCK(trunk);
2006-01-30 13:45:15 +00:00
p->if_vlantrunk = trunk;
trunk->parent = p;
if_ref(trunk->parent);
2006-01-30 13:45:15 +00:00
} else {
VLAN_WLOCK();
2006-01-30 13:45:15 +00:00
trunk = p->if_vlantrunk;
TRUNK_WLOCK(trunk);
2006-01-30 13:45:15 +00:00
}
ifv->ifv_vid = vid; /* must set this before vlan_inshash() */
ifv->ifv_pcp = 0; /* Default: best effort delivery. */
vlan_tag_recalculate(ifv);
2006-01-30 13:45:15 +00:00
error = vlan_inshash(trunk, ifv);
if (error)
goto done;
ifv->ifv_proto = ETHERTYPE_VLAN;
ifv->ifv_encaplen = ETHER_VLAN_ENCAP_LEN;
ifv->ifv_mintu = ETHERMIN;
ifv->ifv_pflags = 0;
ifv->ifv_capenable = -1;
/*
* If the parent supports the VLAN_MTU capability,
* i.e. can Tx/Rx larger than ETHER_MAX_LEN frames,
* use it.
*/
if (p->if_capenable & IFCAP_VLAN_MTU) {
/*
* No need to fudge the MTU since the parent can
* handle extended frames.
*/
ifv->ifv_mtufudge = 0;
} else {
/*
* Fudge the MTU by the encapsulation size. This
* makes us incompatible with strictly compliant
* 802.1Q implementations, but allows us to use
* the feature with other NetBSD implementations,
* which might still be useful.
*/
ifv->ifv_mtufudge = ifv->ifv_encaplen;
}
2006-01-30 13:45:15 +00:00
ifv->ifv_trunk = trunk;
ifp = ifv->ifv_ifp;
/*
* Initialize fields from our parent. This duplicates some
* work with ether_ifattach() but allows for non-ethernet
* interfaces to also work.
*/
ifp->if_mtu = p->if_mtu - ifv->ifv_mtufudge;
2006-01-30 13:45:15 +00:00
ifp->if_baudrate = p->if_baudrate;
ifp->if_output = p->if_output;
ifp->if_input = p->if_input;
ifp->if_resolvemulti = p->if_resolvemulti;
ifp->if_addrlen = p->if_addrlen;
ifp->if_broadcastaddr = p->if_broadcastaddr;
/*
* Copy only a selected subset of flags from the parent.
* Other flags are none of our business.
*/
#define VLAN_COPY_FLAGS (IFF_SIMPLEX)
ifp->if_flags &= ~VLAN_COPY_FLAGS;
ifp->if_flags |= p->if_flags & VLAN_COPY_FLAGS;
#undef VLAN_COPY_FLAGS
ifp->if_link_state = p->if_link_state;
2006-01-30 13:45:15 +00:00
vlan_capabilities(ifv);
/*
* Set up our interface address to reflect the underlying
* physical interface's.
*/
bcopy(IF_LLADDR(p), IF_LLADDR(ifp), p->if_addrlen);
((struct sockaddr_dl *)ifp->if_addr->ifa_addr)->sdl_alen =
p->if_addrlen;
/*
* Configure multicast addresses that may already be
* joined on the vlan device.
*/
(void)vlan_setmulti(ifp);
TASK_INIT(&ifv->lladdr_task, 0, vlan_lladdr_fn, ifv);
/* We are ready for operation now. */
ifp->if_drv_flags |= IFF_DRV_RUNNING;
/* Update flags on the parent, if necessary. */
vlan_setflags(ifp, 1);
2006-01-30 13:45:15 +00:00
done:
/*
* We need to drop the non-sleepable rmlock so that the underlying
* devices can sleep in their vlan_config hooks.
*/
TRUNK_WUNLOCK(trunk);
VLAN_WUNLOCK();
if (error == 0)
EVENTHANDLER_INVOKE(vlan_config, p, ifv->ifv_vid);
VLAN_XUNLOCK();
2006-01-30 13:45:15 +00:00
return (error);
}
static void
vlan_unconfig(struct ifnet *ifp)
{
VLAN_XLOCK();
vlan_unconfig_locked(ifp, 0);
VLAN_XUNLOCK();
}
static void
vlan_unconfig_locked(struct ifnet *ifp, int departing)
{
2006-01-30 13:45:15 +00:00
struct ifvlantrunk *trunk;
struct vlan_mc_entry *mc;
struct ifvlan *ifv;
struct ifnet *parent;
int error;
VLAN_XLOCK_ASSERT();
ifv = ifp->if_softc;
2006-01-30 13:45:15 +00:00
trunk = ifv->ifv_trunk;
parent = NULL;
if (trunk != NULL) {
/*
* Both vlan_transmit and vlan_input rely on the trunk fields
* being NULL to determine whether to bail, so we need to get
* an exclusive lock here to prevent them from using bad
* ifvlans.
*/
VLAN_WLOCK();
parent = trunk->parent;
/*
* Since the interface is being unconfigured, we need to
* empty the list of multicast groups that we may have joined
* while we were alive from the parent's list.
*/
while ((mc = SLIST_FIRST(&ifv->vlan_mc_listhead)) != NULL) {
/*
* If the parent interface is being detached,
* all its multicast addresses have already
* been removed. Warn about errors if
* if_delmulti() does fail, but don't abort as
* all callers expect vlan destruction to
* succeed.
*/
if (!departing) {
error = if_delmulti(parent,
(struct sockaddr *)&mc->mc_addr);
if (error)
if_printf(ifp,
"Failed to delete multicast address from parent: %d\n",
error);
}
SLIST_REMOVE_HEAD(&ifv->vlan_mc_listhead, mc_entries);
free(mc, M_VLAN);
}
vlan_setflags(ifp, 0); /* clear special flags on parent */
/*
* The trunk lock isn't actually required here, but
* vlan_remhash expects it.
*/
TRUNK_WLOCK(trunk);
2006-01-30 13:45:15 +00:00
vlan_remhash(trunk, ifv);
TRUNK_WUNLOCK(trunk);
2006-01-30 13:45:15 +00:00
ifv->ifv_trunk = NULL;
/*
* Check if we were the last.
*/
if (trunk->refcnt == 0) {
parent->if_vlantrunk = NULL;
2006-01-30 13:45:15 +00:00
trunk_destroy(trunk);
}
VLAN_WUNLOCK();
}
/* Disconnect from parent. */
if (ifv->ifv_pflags)
if_printf(ifp, "%s: ifv_pflags unclean\n", __func__);
ifp->if_mtu = ETHERMTU;
ifp->if_link_state = LINK_STATE_UNKNOWN;
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
/*
* Only dispatch an event if vlan was
* attached, otherwise there is nothing
* to cleanup anyway.
*/
if (parent != NULL)
EVENTHANDLER_INVOKE(vlan_unconfig, parent, ifv->ifv_vid);
}
/* Handle a reference counted flag that should be set on the parent as well */
static int
vlan_setflag(struct ifnet *ifp, int flag, int status,
int (*func)(struct ifnet *, int))
{
struct ifvlan *ifv;
int error;
VLAN_SXLOCK_ASSERT();
ifv = ifp->if_softc;
status = status ? (ifp->if_flags & flag) : 0;
/* Now "status" contains the flag value or 0 */
/*
* See if recorded parent's status is different from what
* we want it to be. If it is, flip it. We record parent's
* status in ifv_pflags so that we won't clear parent's flag
* we haven't set. In fact, we don't clear or set parent's
* flags directly, but get or release references to them.
* That's why we can be sure that recorded flags still are
* in accord with actual parent's flags.
*/
if (status != (ifv->ifv_pflags & flag)) {
2006-01-30 13:45:15 +00:00
error = (*func)(PARENT(ifv), status);
if (error)
return (error);
ifv->ifv_pflags &= ~flag;
ifv->ifv_pflags |= status;
}
return (0);
}
/*
* Handle IFF_* flags that require certain changes on the parent:
* if "status" is true, update parent's flags respective to our if_flags;
* if "status" is false, forcedly clear the flags set on parent.
*/
static int
vlan_setflags(struct ifnet *ifp, int status)
{
int error, i;
for (i = 0; vlan_pflags[i].flag; i++) {
error = vlan_setflag(ifp, vlan_pflags[i].flag,
status, vlan_pflags[i].func);
if (error)
return (error);
}
return (0);
}
/* Inform all vlans that their parent has changed link state */
static void
vlan_link_state(struct ifnet *ifp)
{
struct ifvlantrunk *trunk;
struct ifvlan *ifv;
VLAN_LOCK_READER;
2006-01-30 13:45:15 +00:00
/* Called from a taskqueue_swi task, so we cannot sleep. */
VLAN_RLOCK();
trunk = ifp->if_vlantrunk;
if (trunk == NULL) {
VLAN_RUNLOCK();
return;
}
TRUNK_WLOCK(trunk);
VLAN_FOREACH(ifv, trunk) {
ifv->ifv_ifp->if_baudrate = trunk->parent->if_baudrate;
if_link_state_change(ifv->ifv_ifp,
trunk->parent->if_link_state);
}
TRUNK_WUNLOCK(trunk);
VLAN_RUNLOCK();
2006-01-30 13:45:15 +00:00
}
static void
vlan_capabilities(struct ifvlan *ifv)
{
struct ifnet *p;
struct ifnet *ifp;
struct ifnet_hw_tsomax hw_tsomax;
int cap = 0, ena = 0, mena;
u_long hwa = 0;
2006-01-30 13:45:15 +00:00
VLAN_SXLOCK_ASSERT();
TRUNK_WLOCK_ASSERT(TRUNK(ifv));
p = PARENT(ifv);
ifp = ifv->ifv_ifp;
2006-01-30 13:45:15 +00:00
/* Mask parent interface enabled capabilities disabled by user. */
mena = p->if_capenable & ifv->ifv_capenable;
2006-01-30 13:45:15 +00:00
/*
* If the parent interface can do checksum offloading
* on VLANs, then propagate its hardware-assisted
* checksumming flags. Also assert that checksum
* offloading requires hardware VLAN tagging.
*/
if (p->if_capabilities & IFCAP_VLAN_HWCSUM)
cap |= p->if_capabilities & (IFCAP_HWCSUM | IFCAP_HWCSUM_IPV6);
2006-01-30 13:45:15 +00:00
if (p->if_capenable & IFCAP_VLAN_HWCSUM &&
p->if_capenable & IFCAP_VLAN_HWTAGGING) {
ena |= mena & (IFCAP_HWCSUM | IFCAP_HWCSUM_IPV6);
if (ena & IFCAP_TXCSUM)
hwa |= p->if_hwassist & (CSUM_IP | CSUM_TCP |
CSUM_UDP | CSUM_SCTP);
if (ena & IFCAP_TXCSUM_IPV6)
hwa |= p->if_hwassist & (CSUM_TCP_IPV6 |
CSUM_UDP_IPV6 | CSUM_SCTP_IPV6);
}
/*
* If the parent interface can do TSO on VLANs then
* propagate the hardware-assisted flag. TSO on VLANs
* does not necessarily require hardware VLAN tagging.
*/
memset(&hw_tsomax, 0, sizeof(hw_tsomax));
if_hw_tsomax_common(p, &hw_tsomax);
if_hw_tsomax_update(ifp, &hw_tsomax);
if (p->if_capabilities & IFCAP_VLAN_HWTSO)
cap |= p->if_capabilities & IFCAP_TSO;
if (p->if_capenable & IFCAP_VLAN_HWTSO) {
ena |= mena & IFCAP_TSO;
if (ena & IFCAP_TSO)
hwa |= p->if_hwassist & CSUM_TSO;
}
/*
* If the parent interface can do LRO and checksum offloading on
* VLANs, then guess it may do LRO on VLANs. False positive here
* cost nothing, while false negative may lead to some confusions.
*/
if (p->if_capabilities & IFCAP_VLAN_HWCSUM)
cap |= p->if_capabilities & IFCAP_LRO;
if (p->if_capenable & IFCAP_VLAN_HWCSUM)
ena |= p->if_capenable & IFCAP_LRO;
/*
* If the parent interface can offload TCP connections over VLANs then
* propagate its TOE capability to the VLAN interface.
*
* All TOE drivers in the tree today can deal with VLANs. If this
* changes then IFCAP_VLAN_TOE should be promoted to a full capability
* with its own bit.
*/
#define IFCAP_VLAN_TOE IFCAP_TOE
if (p->if_capabilities & IFCAP_VLAN_TOE)
cap |= p->if_capabilities & IFCAP_TOE;
if (p->if_capenable & IFCAP_VLAN_TOE) {
TOEDEV(ifp) = TOEDEV(p);
ena |= mena & IFCAP_TOE;
}
Implement kernel support for hardware rate limited sockets. - Add RATELIMIT kernel configuration keyword which must be set to enable the new functionality. - Add support for hardware driven, Receive Side Scaling, RSS aware, rate limited sendqueues and expose the functionality through the already established SO_MAX_PACING_RATE setsockopt(). The API support rates in the range from 1 to 4Gbytes/s which are suitable for regular TCP and UDP streams. The setsockopt(2) manual page has been updated. - Add rate limit function callback API to "struct ifnet" which supports the following operations: if_snd_tag_alloc(), if_snd_tag_modify(), if_snd_tag_query() and if_snd_tag_free(). - Add support to ifconfig to view, set and clear the IFCAP_TXRTLMT flag, which tells if a network driver supports rate limiting or not. - This patch also adds support for rate limiting through VLAN and LAGG intermediate network devices. - How rate limiting works: 1) The userspace application calls setsockopt() after accepting or making a new connection to set the rate which is then stored in the socket structure in the kernel. Later on when packets are transmitted a check is made in the transmit path for rate changes. A rate change implies a non-blocking ifp->if_snd_tag_alloc() call will be made to the destination network interface, which then sets up a custom sendqueue with the given rate limitation parameter. A "struct m_snd_tag" pointer is returned which serves as a "snd_tag" hint in the m_pkthdr for the subsequently transmitted mbufs. 2) When the network driver sees the "m->m_pkthdr.snd_tag" different from NULL, it will move the packets into a designated rate limited sendqueue given by the snd_tag pointer. It is up to the individual drivers how the rate limited traffic will be rate limited. 3) Route changes are detected by the NIC drivers in the ifp->if_transmit() routine when the ifnet pointer in the incoming snd_tag mismatches the one of the network interface. The network adapter frees the mbuf and returns EAGAIN which causes the ip_output() to release and clear the send tag. Upon next ip_output() a new "snd_tag" will be tried allocated. 4) When the PCB is detached the custom sendqueue will be released by a non-blocking ifp->if_snd_tag_free() call to the currently bound network interface. Reviewed by: wblock (manpages), adrian, gallatin, scottl (network) Differential Revision: https://reviews.freebsd.org/D3687 Sponsored by: Mellanox Technologies MFC after: 3 months
2017-01-18 13:31:17 +00:00
/*
* If the parent interface supports dynamic link state, so does the
* VLAN interface.
*/
cap |= (p->if_capabilities & IFCAP_LINKSTATE);
ena |= (mena & IFCAP_LINKSTATE);
Implement kernel support for hardware rate limited sockets. - Add RATELIMIT kernel configuration keyword which must be set to enable the new functionality. - Add support for hardware driven, Receive Side Scaling, RSS aware, rate limited sendqueues and expose the functionality through the already established SO_MAX_PACING_RATE setsockopt(). The API support rates in the range from 1 to 4Gbytes/s which are suitable for regular TCP and UDP streams. The setsockopt(2) manual page has been updated. - Add rate limit function callback API to "struct ifnet" which supports the following operations: if_snd_tag_alloc(), if_snd_tag_modify(), if_snd_tag_query() and if_snd_tag_free(). - Add support to ifconfig to view, set and clear the IFCAP_TXRTLMT flag, which tells if a network driver supports rate limiting or not. - This patch also adds support for rate limiting through VLAN and LAGG intermediate network devices. - How rate limiting works: 1) The userspace application calls setsockopt() after accepting or making a new connection to set the rate which is then stored in the socket structure in the kernel. Later on when packets are transmitted a check is made in the transmit path for rate changes. A rate change implies a non-blocking ifp->if_snd_tag_alloc() call will be made to the destination network interface, which then sets up a custom sendqueue with the given rate limitation parameter. A "struct m_snd_tag" pointer is returned which serves as a "snd_tag" hint in the m_pkthdr for the subsequently transmitted mbufs. 2) When the network driver sees the "m->m_pkthdr.snd_tag" different from NULL, it will move the packets into a designated rate limited sendqueue given by the snd_tag pointer. It is up to the individual drivers how the rate limited traffic will be rate limited. 3) Route changes are detected by the NIC drivers in the ifp->if_transmit() routine when the ifnet pointer in the incoming snd_tag mismatches the one of the network interface. The network adapter frees the mbuf and returns EAGAIN which causes the ip_output() to release and clear the send tag. Upon next ip_output() a new "snd_tag" will be tried allocated. 4) When the PCB is detached the custom sendqueue will be released by a non-blocking ifp->if_snd_tag_free() call to the currently bound network interface. Reviewed by: wblock (manpages), adrian, gallatin, scottl (network) Differential Revision: https://reviews.freebsd.org/D3687 Sponsored by: Mellanox Technologies MFC after: 3 months
2017-01-18 13:31:17 +00:00
#ifdef RATELIMIT
/*
* If the parent interface supports ratelimiting, so does the
* VLAN interface.
*/
cap |= (p->if_capabilities & IFCAP_TXRTLMT);
ena |= (mena & IFCAP_TXRTLMT);
Implement kernel support for hardware rate limited sockets. - Add RATELIMIT kernel configuration keyword which must be set to enable the new functionality. - Add support for hardware driven, Receive Side Scaling, RSS aware, rate limited sendqueues and expose the functionality through the already established SO_MAX_PACING_RATE setsockopt(). The API support rates in the range from 1 to 4Gbytes/s which are suitable for regular TCP and UDP streams. The setsockopt(2) manual page has been updated. - Add rate limit function callback API to "struct ifnet" which supports the following operations: if_snd_tag_alloc(), if_snd_tag_modify(), if_snd_tag_query() and if_snd_tag_free(). - Add support to ifconfig to view, set and clear the IFCAP_TXRTLMT flag, which tells if a network driver supports rate limiting or not. - This patch also adds support for rate limiting through VLAN and LAGG intermediate network devices. - How rate limiting works: 1) The userspace application calls setsockopt() after accepting or making a new connection to set the rate which is then stored in the socket structure in the kernel. Later on when packets are transmitted a check is made in the transmit path for rate changes. A rate change implies a non-blocking ifp->if_snd_tag_alloc() call will be made to the destination network interface, which then sets up a custom sendqueue with the given rate limitation parameter. A "struct m_snd_tag" pointer is returned which serves as a "snd_tag" hint in the m_pkthdr for the subsequently transmitted mbufs. 2) When the network driver sees the "m->m_pkthdr.snd_tag" different from NULL, it will move the packets into a designated rate limited sendqueue given by the snd_tag pointer. It is up to the individual drivers how the rate limited traffic will be rate limited. 3) Route changes are detected by the NIC drivers in the ifp->if_transmit() routine when the ifnet pointer in the incoming snd_tag mismatches the one of the network interface. The network adapter frees the mbuf and returns EAGAIN which causes the ip_output() to release and clear the send tag. Upon next ip_output() a new "snd_tag" will be tried allocated. 4) When the PCB is detached the custom sendqueue will be released by a non-blocking ifp->if_snd_tag_free() call to the currently bound network interface. Reviewed by: wblock (manpages), adrian, gallatin, scottl (network) Differential Revision: https://reviews.freebsd.org/D3687 Sponsored by: Mellanox Technologies MFC after: 3 months
2017-01-18 13:31:17 +00:00
#endif
ifp->if_capabilities = cap;
ifp->if_capenable = ena;
ifp->if_hwassist = hwa;
2006-01-30 13:45:15 +00:00
}
static void
vlan_trunk_capabilities(struct ifnet *ifp)
{
struct ifvlantrunk *trunk;
2006-01-30 13:45:15 +00:00
struct ifvlan *ifv;
VLAN_SLOCK();
trunk = ifp->if_vlantrunk;
if (trunk == NULL) {
VLAN_SUNLOCK();
return;
}
TRUNK_WLOCK(trunk);
VLAN_FOREACH(ifv, trunk) {
vlan_capabilities(ifv);
2006-01-30 13:45:15 +00:00
}
TRUNK_WUNLOCK(trunk);
VLAN_SUNLOCK();
}
static int
vlan_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data)
{
struct ifnet *p;
struct ifreq *ifr;
struct ifaddr *ifa;
struct ifvlan *ifv;
struct ifvlantrunk *trunk;
struct vlanreq vlr;
int error = 0;
VLAN_LOCK_READER;
ifr = (struct ifreq *)data;
ifa = (struct ifaddr *) data;
ifv = ifp->if_softc;
switch (cmd) {
case SIOCSIFADDR:
ifp->if_flags |= IFF_UP;
#ifdef INET
if (ifa->ifa_addr->sa_family == AF_INET)
arp_ifinit(ifp, ifa);
#endif
break;
case SIOCGIFADDR:
bcopy(IF_LLADDR(ifp), &ifr->ifr_addr.sa_data[0],
ifp->if_addrlen);
break;
case SIOCGIFMEDIA:
VLAN_SLOCK();
2006-01-30 13:45:15 +00:00
if (TRUNK(ifv) != NULL) {
p = PARENT(ifv);
if_ref(p);
error = (*p->if_ioctl)(p, SIOCGIFMEDIA, data);
if_rele(p);
/* Limit the result to the parent's current config. */
if (error == 0) {
struct ifmediareq *ifmr;
ifmr = (struct ifmediareq *)data;
if (ifmr->ifm_count >= 1 && ifmr->ifm_ulist) {
ifmr->ifm_count = 1;
error = copyout(&ifmr->ifm_current,
ifmr->ifm_ulist,
sizeof(int));
}
}
} else {
error = EINVAL;
}
VLAN_SUNLOCK();
break;
case SIOCSIFMEDIA:
error = EINVAL;
break;
case SIOCSIFMTU:
/*
* Set the interface MTU.
*/
VLAN_SLOCK();
trunk = TRUNK(ifv);
if (trunk != NULL) {
TRUNK_WLOCK(trunk);
if (ifr->ifr_mtu >
2006-01-30 13:45:15 +00:00
(PARENT(ifv)->if_mtu - ifv->ifv_mtufudge) ||
ifr->ifr_mtu <
(ifv->ifv_mintu - ifv->ifv_mtufudge))
error = EINVAL;
else
ifp->if_mtu = ifr->ifr_mtu;
TRUNK_WUNLOCK(trunk);
} else
error = EINVAL;
VLAN_SUNLOCK();
break;
case SIOCSETVLAN:
#ifdef VIMAGE
/*
* XXXRW/XXXBZ: The goal in these checks is to allow a VLAN
* interface to be delegated to a jail without allowing the
* jail to change what underlying interface/VID it is
* associated with. We are not entirely convinced that this
* is the right way to accomplish that policy goal.
*/
if (ifp->if_vnet != ifp->if_home_vnet) {
error = EPERM;
break;
}
#endif
error = copyin(ifr_data_get_ptr(ifr), &vlr, sizeof(vlr));
if (error)
break;
if (vlr.vlr_parent[0] == '\0') {
vlan_unconfig(ifp);
break;
}
p = ifunit_ref(vlr.vlr_parent);
2009-09-09 03:36:43 +00:00
if (p == NULL) {
error = ENOENT;
break;
}
2006-01-30 13:45:15 +00:00
error = vlan_config(ifv, p, vlr.vlr_tag);
if_rele(p);
break;
case SIOCGETVLAN:
#ifdef VIMAGE
if (ifp->if_vnet != ifp->if_home_vnet) {
error = EPERM;
break;
}
#endif
bzero(&vlr, sizeof(vlr));
VLAN_SLOCK();
2006-01-30 13:45:15 +00:00
if (TRUNK(ifv) != NULL) {
strlcpy(vlr.vlr_parent, PARENT(ifv)->if_xname,
sizeof(vlr.vlr_parent));
vlr.vlr_tag = ifv->ifv_vid;
}
VLAN_SUNLOCK();
error = copyout(&vlr, ifr_data_get_ptr(ifr), sizeof(vlr));
break;
case SIOCSIFFLAGS:
/*
* We should propagate selected flags to the parent,
* e.g., promiscuous mode.
*/
VLAN_XLOCK();
2006-01-30 13:45:15 +00:00
if (TRUNK(ifv) != NULL)
error = vlan_setflags(ifp, 1);
VLAN_XUNLOCK();
break;
case SIOCADDMULTI:
case SIOCDELMULTI:
2006-01-30 13:45:15 +00:00
/*
* If we don't have a parent, just remember the membership for
* when we do.
*
* XXX We need the rmlock here to avoid sleeping while
* holding in6_multi_mtx.
2006-01-30 13:45:15 +00:00
*/
VLAN_RLOCK();
trunk = TRUNK(ifv);
if (trunk != NULL) {
TRUNK_WLOCK(trunk);
2006-01-30 13:45:15 +00:00
error = vlan_setmulti(ifp);
TRUNK_WUNLOCK(trunk);
}
VLAN_RUNLOCK();
break;
2006-01-30 13:45:15 +00:00
case SIOCGVLANPCP:
#ifdef VIMAGE
if (ifp->if_vnet != ifp->if_home_vnet) {
error = EPERM;
break;
}
#endif
ifr->ifr_vlan_pcp = ifv->ifv_pcp;
break;
case SIOCSVLANPCP:
#ifdef VIMAGE
if (ifp->if_vnet != ifp->if_home_vnet) {
error = EPERM;
break;
}
#endif
error = priv_check(curthread, PRIV_NET_SETVLANPCP);
if (error)
break;
if (ifr->ifr_vlan_pcp > 7) {
error = EINVAL;
break;
}
ifv->ifv_pcp = ifr->ifr_vlan_pcp;
vlan_tag_recalculate(ifv);
/* broadcast event about PCP change */
EVENTHANDLER_INVOKE(ifnet_event, ifp, IFNET_EVENT_PCP);
break;
case SIOCSIFCAP:
VLAN_SLOCK();
ifv->ifv_capenable = ifr->ifr_reqcap;
trunk = TRUNK(ifv);
if (trunk != NULL) {
TRUNK_WLOCK(trunk);
vlan_capabilities(ifv);
TRUNK_WUNLOCK(trunk);
}
VLAN_SUNLOCK();
break;
default:
error = EINVAL;
break;
}
return (error);
}
Implement kernel support for hardware rate limited sockets. - Add RATELIMIT kernel configuration keyword which must be set to enable the new functionality. - Add support for hardware driven, Receive Side Scaling, RSS aware, rate limited sendqueues and expose the functionality through the already established SO_MAX_PACING_RATE setsockopt(). The API support rates in the range from 1 to 4Gbytes/s which are suitable for regular TCP and UDP streams. The setsockopt(2) manual page has been updated. - Add rate limit function callback API to "struct ifnet" which supports the following operations: if_snd_tag_alloc(), if_snd_tag_modify(), if_snd_tag_query() and if_snd_tag_free(). - Add support to ifconfig to view, set and clear the IFCAP_TXRTLMT flag, which tells if a network driver supports rate limiting or not. - This patch also adds support for rate limiting through VLAN and LAGG intermediate network devices. - How rate limiting works: 1) The userspace application calls setsockopt() after accepting or making a new connection to set the rate which is then stored in the socket structure in the kernel. Later on when packets are transmitted a check is made in the transmit path for rate changes. A rate change implies a non-blocking ifp->if_snd_tag_alloc() call will be made to the destination network interface, which then sets up a custom sendqueue with the given rate limitation parameter. A "struct m_snd_tag" pointer is returned which serves as a "snd_tag" hint in the m_pkthdr for the subsequently transmitted mbufs. 2) When the network driver sees the "m->m_pkthdr.snd_tag" different from NULL, it will move the packets into a designated rate limited sendqueue given by the snd_tag pointer. It is up to the individual drivers how the rate limited traffic will be rate limited. 3) Route changes are detected by the NIC drivers in the ifp->if_transmit() routine when the ifnet pointer in the incoming snd_tag mismatches the one of the network interface. The network adapter frees the mbuf and returns EAGAIN which causes the ip_output() to release and clear the send tag. Upon next ip_output() a new "snd_tag" will be tried allocated. 4) When the PCB is detached the custom sendqueue will be released by a non-blocking ifp->if_snd_tag_free() call to the currently bound network interface. Reviewed by: wblock (manpages), adrian, gallatin, scottl (network) Differential Revision: https://reviews.freebsd.org/D3687 Sponsored by: Mellanox Technologies MFC after: 3 months
2017-01-18 13:31:17 +00:00
#ifdef RATELIMIT
static int
vlan_snd_tag_alloc(struct ifnet *ifp,
union if_snd_tag_alloc_params *params,
struct m_snd_tag **ppmt)
{
/* get trunk device */
ifp = vlan_trunkdev(ifp);
if (ifp == NULL || (ifp->if_capenable & IFCAP_TXRTLMT) == 0)
return (EOPNOTSUPP);
/* forward allocation request */
return (ifp->if_snd_tag_alloc(ifp, params, ppmt));
}
#endif