d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
6f8aee2268
freebsd-nq/sys/dev/ata/ata-disk.c

427 lines
12 KiB
C
Raw Normal View History

Finally!! The much roumored replacement for our current IDE/ATA/ATAPI is materialising in the CVS repositories around the globe. So what does this bring us: A new reengineered ATA/ATAPI subsystem, that tries to overcome most of the deficiencies with the current drivers. It supports PCI as well as ISA devices without all the hackery in ide_pci.c to make PCI devices look like ISA counterparts. It doesn't have the excessive wait problem on probe, in fact you shouldn't notice any delay when your devices are getting probed. Probing and attaching of devices are postponed until interrupts are enabled (well almost, not finished yet for disks), making things alot cleaner. Improved performance, although DMA support is still WIP and not in this pre alpha release, worldstone is faster with the new driver compared to the old even with DMA. So what does it take away: There is NO support for old MFM/RLL/ESDI disks. There is NO support for bad144, if your disk is bad, ditch it, it has already outgrown its internal spare sectors, and is dying. For you to try this out, you will have to modify your kernel config file to use the "ata" controller instead of all wdc? entries. example: # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes #You should add the following on ISA systems: controller ata1 at isa? port "IO_WD1" bio irq 14 controller ata2 at isa? port "IO_WD2" bio irq 15 You can leave it all in there, the system knows how to manage. For now this driver reuses the device entries from the old system (that will probably change later), but remember that disks are now numbered in the sequence they are found (like the SCSI system) not as absolute positions as the old system. Although I have tested this on all the systems I can get my hands on, there might very well be gremlins in there, so use AT YOU OWN RISK!! This is still WIP, so there are lots of rough edges and unfinished things in there, and what I have in my lab might look very different from whats in CVS at any given time. So please have all eventual changes go through me, or chances are they just dissapears... I would very much like to hear from you, both good and bad news are very welcome. Enjoy!! -Søren
1999-03-01 21:19:19 +00:00
/*-
Overhaul of the timeout/reinit framework. This should clear up most of the leftovers from the old version that really doesn't work anymore. Add a reset function for host-end of the ATA channel. This is needed for the SiI3112 in order to whack it back to reality if a device locks up the SATA interface (thereby preventing that we can reset the device). The result is that ATA now recovers from the timeouts that happens with the SiI3112A and more or less all disks based on old PATA electronics with a Marvell PATA->SATA converter. This includes lots of the popular SATA dongles and the WDC Raptor disks..
2004-01-11 22:08:34 +00:00
* Copyright (c) 1998 - 2004 S<EFBFBD>ren Schmidt <sos@FreeBSD.org>
Finally!! The much roumored replacement for our current IDE/ATA/ATAPI is materialising in the CVS repositories around the globe. So what does this bring us: A new reengineered ATA/ATAPI subsystem, that tries to overcome most of the deficiencies with the current drivers. It supports PCI as well as ISA devices without all the hackery in ide_pci.c to make PCI devices look like ISA counterparts. It doesn't have the excessive wait problem on probe, in fact you shouldn't notice any delay when your devices are getting probed. Probing and attaching of devices are postponed until interrupts are enabled (well almost, not finished yet for disks), making things alot cleaner. Improved performance, although DMA support is still WIP and not in this pre alpha release, worldstone is faster with the new driver compared to the old even with DMA. So what does it take away: There is NO support for old MFM/RLL/ESDI disks. There is NO support for bad144, if your disk is bad, ditch it, it has already outgrown its internal spare sectors, and is dying. For you to try this out, you will have to modify your kernel config file to use the "ata" controller instead of all wdc? entries. example: # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes #You should add the following on ISA systems: controller ata1 at isa? port "IO_WD1" bio irq 14 controller ata2 at isa? port "IO_WD2" bio irq 15 You can leave it all in there, the system knows how to manage. For now this driver reuses the device entries from the old system (that will probably change later), but remember that disks are now numbered in the sequence they are found (like the SCSI system) not as absolute positions as the old system. Although I have tested this on all the systems I can get my hands on, there might very well be gremlins in there, so use AT YOU OWN RISK!! This is still WIP, so there are lots of rough edges and unfinished things in there, and what I have in my lab might look very different from whats in CVS at any given time. So please have all eventual changes go through me, or chances are they just dissapears... I would very much like to hear from you, both good and bad news are very welcome. Enjoy!! -Søren
1999-03-01 21:19:19 +00:00
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
Use __FBSDID(). Also some minor style cleanups.
2003-08-24 17:55:58 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
Add support for the HPT366 chip, this is used on the Abit boards and their HotRod controller and on SIIG PCI ultra DMA controller. These changes also made lots of the Promise code go away, its all much more generic this way. Get rid of atapi_immed_cmd, instead use the queue to move atapi commands from interrupt context if nessesary, the entire atapi layer has gotten an overhaul. Lots of fixes to utililize the new features in subr_disk.c etc, and get rid of the last biots of softc arrays in the drivers, the only one left is atadevices which cannot easily go away (yet). Use our own malloc names, its a lot easier to track memory usage this way. General cleanup overall.
1999-10-09 19:57:13 +00:00
#include "opt_ata.h"
Finally!! The much roumored replacement for our current IDE/ATA/ATAPI is materialising in the CVS repositories around the globe. So what does this bring us: A new reengineered ATA/ATAPI subsystem, that tries to overcome most of the deficiencies with the current drivers. It supports PCI as well as ISA devices without all the hackery in ide_pci.c to make PCI devices look like ISA counterparts. It doesn't have the excessive wait problem on probe, in fact you shouldn't notice any delay when your devices are getting probed. Probing and attaching of devices are postponed until interrupts are enabled (well almost, not finished yet for disks), making things alot cleaner. Improved performance, although DMA support is still WIP and not in this pre alpha release, worldstone is faster with the new driver compared to the old even with DMA. So what does it take away: There is NO support for old MFM/RLL/ESDI disks. There is NO support for bad144, if your disk is bad, ditch it, it has already outgrown its internal spare sectors, and is dying. For you to try this out, you will have to modify your kernel config file to use the "ata" controller instead of all wdc? entries. example: # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes #You should add the following on ISA systems: controller ata1 at isa? port "IO_WD1" bio irq 14 controller ata2 at isa? port "IO_WD2" bio irq 15 You can leave it all in there, the system knows how to manage. For now this driver reuses the device entries from the old system (that will probably change later), but remember that disks are now numbered in the sequence they are found (like the SCSI system) not as absolute positions as the old system. Although I have tested this on all the systems I can get my hands on, there might very well be gremlins in there, so use AT YOU OWN RISK!! This is still WIP, so there are lots of rough edges and unfinished things in there, and what I have in my lab might look very different from whats in CVS at any given time. So please have all eventual changes go through me, or chances are they just dissapears... I would very much like to hear from you, both good and bad news are very welcome. Enjoy!! -Søren
1999-03-01 21:19:19 +00:00
#include <sys/param.h>
#include <sys/systm.h>
Provide the interface to atacontrol and associated logic. see atacontrol(8) for more. Also the ATA_ENABLE_ATAPI_DMA, ATA_ENABLE_WC and ATA_ENABLE_TAGS options are gone, use the tuneables listed in ata.4 instead from the loader (this makes it possible to switch off DMA before the driver has to touch the devices on broken hardware).
2001-03-15 15:36:25 +00:00
#include <sys/ata.h>
Finally!! The much roumored replacement for our current IDE/ATA/ATAPI is materialising in the CVS repositories around the globe. So what does this bring us: A new reengineered ATA/ATAPI subsystem, that tries to overcome most of the deficiencies with the current drivers. It supports PCI as well as ISA devices without all the hackery in ide_pci.c to make PCI devices look like ISA counterparts. It doesn't have the excessive wait problem on probe, in fact you shouldn't notice any delay when your devices are getting probed. Probing and attaching of devices are postponed until interrupts are enabled (well almost, not finished yet for disks), making things alot cleaner. Improved performance, although DMA support is still WIP and not in this pre alpha release, worldstone is faster with the new driver compared to the old even with DMA. So what does it take away: There is NO support for old MFM/RLL/ESDI disks. There is NO support for bad144, if your disk is bad, ditch it, it has already outgrown its internal spare sectors, and is dying. For you to try this out, you will have to modify your kernel config file to use the "ata" controller instead of all wdc? entries. example: # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes #You should add the following on ISA systems: controller ata1 at isa? port "IO_WD1" bio irq 14 controller ata2 at isa? port "IO_WD2" bio irq 15 You can leave it all in there, the system knows how to manage. For now this driver reuses the device entries from the old system (that will probably change later), but remember that disks are now numbered in the sequence they are found (like the SCSI system) not as absolute positions as the old system. Although I have tested this on all the systems I can get my hands on, there might very well be gremlins in there, so use AT YOU OWN RISK!! This is still WIP, so there are lots of rough edges and unfinished things in there, and what I have in my lab might look very different from whats in CVS at any given time. So please have all eventual changes go through me, or chances are they just dissapears... I would very much like to hear from you, both good and bad news are very welcome. Enjoy!! -Søren
1999-03-01 21:19:19 +00:00
#include <sys/kernel.h>
#include <sys/malloc.h>
Separate the struct bio related stuff out of <sys/buf.h> into <sys/bio.h>. <sys/bio.h> is now a prerequisite for <sys/buf.h> but it shall not be made a nested include according to bdes teachings on the subject of nested includes. Diskdrivers and similar stuff below specfs::strategy() should no longer need to include <sys/buf.> unless they need caching of data. Still a few bogus uses of struct buf to track down. Repocopy by: peter
2000-05-05 09:59:14 +00:00
#include <sys/bio.h>
Have another go at the VIA support, this time use the PCI ID form the main component in the southbridge chip to determine which VIA chip we are dealing with. Try to enable DMA on generic controllers that say they has the capability, instead of relying on the BIOS to have set it up.
1999-12-14 10:25:28 +00:00
#include <sys/bus.h>
nullclose, not noclose of course.
1999-09-05 15:41:09 +00:00
#include <sys/conf.h>
Use micro "disk" layer in ata-disk Reviewed by: sos
1999-09-03 10:57:17 +00:00
#include <sys/disk.h>
call ata_reinit in addump trying to make sure the dump will succed, also check for errors underways, and make it possible to abort the dump by hitting a key.
1999-11-27 17:06:10 +00:00
#include <sys/cons.h>
Add sysctls for reading the tunables as suggested by des. Minor cleanups plus checks of the ->active state. Cosmetics.
2001-03-19 08:04:54 +00:00
#include <sys/sysctl.h>
Overhaul of the timeout/reinit framework. This should clear up most of the leftovers from the old version that really doesn't work anymore. Add a reset function for host-end of the ATA channel. This is needed for the SiI3112 in order to whack it back to reality if a device locks up the SATA interface (thereby preventing that we can reset the device). The result is that ATA now recovers from the timeouts that happens with the SiI3112A and more or less all disks based on old PATA electronics with a Marvell PATA->SATA converter. This includes lots of the popular SATA dongles and the WDC Raptor disks..
2004-01-11 22:08:34 +00:00
#include <sys/sema.h>
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
#include <sys/taskqueue.h>
Use UMA instead of plain malloc for getting ATA request storage. This gives +10% performance on simple tests, so definitly worth it. A few percent more could be had by not using M_ZERO'd alloc's, but we then need to clear fields all over the place to be safe, and that was deemed not worth the trouble (and it makes life dangerous).
2004-01-14 21:26:35 +00:00
#include <vm/uma.h>
Nine'th update to the new ATA/ATAPI driver: The atapi subsystem has gotten better error handeling and timeouts, it also tries a REQUEST SENSE command when devices returns errors, to give a little more info as to what went wrong. It might be a little verbose for now, but I'm interested in as much feedback on errors as possible, especially timeouts, as I'm a bit in doubt if I've chosen resonable default values everywhere. The disk driver has been changed a bit to prepare for tagged queing, which is next on my list. The disk driver has grown a dump routine, I got one implementation from Darrell Anderson <anderson@cs.duke.edu> which also did partial dumps (usefull on big memory machines) I left out the partial stuff for now, and changed the rest alot to fit into the new ad_request framework. Some minor cleanups and rearrangements as well. As usual USE AT YOUR OWN RISK!!, this is still pre alpha level code. Especially the DMA support can hose your disk real bad if anything goes wrong, again you have been warned :) Notebook owners should be carefull that their machines dont suspend as this might cause trouble... But please tell me how it works for you! Enjoy! -Søren
1999-06-25 09:03:07 +00:00
#include <machine/md_var.h>
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
#include <machine/bus.h>
Introduce busspace instead of the good old in/out instructions. Not pretty but it works (I hope)...
2001-02-06 16:44:25 +00:00
#include <sys/rman.h>
Use bioq_flush() to drain a bio queue with a specific error code. Retain the mistake of not updating the devstat API for now. Spell bioq_disksort() consistently with the remaining bioq_*(). #include <geom/geom_disk.h> where this is more appropriate.
2003-04-01 15:06:26 +00:00
#include <geom/geom_disk.h>
Finally!! The much roumored replacement for our current IDE/ATA/ATAPI is materialising in the CVS repositories around the globe. So what does this bring us: A new reengineered ATA/ATAPI subsystem, that tries to overcome most of the deficiencies with the current drivers. It supports PCI as well as ISA devices without all the hackery in ide_pci.c to make PCI devices look like ISA counterparts. It doesn't have the excessive wait problem on probe, in fact you shouldn't notice any delay when your devices are getting probed. Probing and attaching of devices are postponed until interrupts are enabled (well almost, not finished yet for disks), making things alot cleaner. Improved performance, although DMA support is still WIP and not in this pre alpha release, worldstone is faster with the new driver compared to the old even with DMA. So what does it take away: There is NO support for old MFM/RLL/ESDI disks. There is NO support for bad144, if your disk is bad, ditch it, it has already outgrown its internal spare sectors, and is dying. For you to try this out, you will have to modify your kernel config file to use the "ata" controller instead of all wdc? entries. example: # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes #You should add the following on ISA systems: controller ata1 at isa? port "IO_WD1" bio irq 14 controller ata2 at isa? port "IO_WD2" bio irq 15 You can leave it all in there, the system knows how to manage. For now this driver reuses the device entries from the old system (that will probably change later), but remember that disks are now numbered in the sequence they are found (like the SCSI system) not as absolute positions as the old system. Although I have tested this on all the systems I can get my hands on, there might very well be gremlins in there, so use AT YOU OWN RISK!! This is still WIP, so there are lots of rough edges and unfinished things in there, and what I have in my lab might look very different from whats in CVS at any given time. So please have all eventual changes go through me, or chances are they just dissapears... I would very much like to hear from you, both good and bad news are very welcome. Enjoy!! -Søren
1999-03-01 21:19:19 +00:00
#include <dev/ata/ata-all.h>
First round off updates/fixes to the ATA driver. This moves all chipset specific code to a new file 'ata-chipset.c'. Extensive use of tables and pointers to avoid having the same switch on chipset type in several places, and to allow substituting various functions for different HW arch needs. Added PIO mode setup and all DMA modes. Support for all known SiS chipsets. Thanks to Christoph Kukulies for sponsoring a nice ASUS P4S8X SiS648 based board for this work! Tested on: i386, PC98, alpha and sparc64
2003-02-20 20:02:32 +00:00
#include <dev/ata/ata-pci.h>
Finally!! The much roumored replacement for our current IDE/ATA/ATAPI is materialising in the CVS repositories around the globe. So what does this bring us: A new reengineered ATA/ATAPI subsystem, that tries to overcome most of the deficiencies with the current drivers. It supports PCI as well as ISA devices without all the hackery in ide_pci.c to make PCI devices look like ISA counterparts. It doesn't have the excessive wait problem on probe, in fact you shouldn't notice any delay when your devices are getting probed. Probing and attaching of devices are postponed until interrupts are enabled (well almost, not finished yet for disks), making things alot cleaner. Improved performance, although DMA support is still WIP and not in this pre alpha release, worldstone is faster with the new driver compared to the old even with DMA. So what does it take away: There is NO support for old MFM/RLL/ESDI disks. There is NO support for bad144, if your disk is bad, ditch it, it has already outgrown its internal spare sectors, and is dying. For you to try this out, you will have to modify your kernel config file to use the "ata" controller instead of all wdc? entries. example: # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes #You should add the following on ISA systems: controller ata1 at isa? port "IO_WD1" bio irq 14 controller ata2 at isa? port "IO_WD2" bio irq 15 You can leave it all in there, the system knows how to manage. For now this driver reuses the device entries from the old system (that will probably change later), but remember that disks are now numbered in the sequence they are found (like the SCSI system) not as absolute positions as the old system. Although I have tested this on all the systems I can get my hands on, there might very well be gremlins in there, so use AT YOU OWN RISK!! This is still WIP, so there are lots of rough edges and unfinished things in there, and what I have in my lab might look very different from whats in CVS at any given time. So please have all eventual changes go through me, or chances are they just dissapears... I would very much like to hear from you, both good and bad news are very welcome. Enjoy!! -Søren
1999-03-01 21:19:19 +00:00
#include <dev/ata/ata-disk.h>
Add support for ATA "pseudo" RAID controllers as the Promise Fasttrak and HighPoint HPT370 controllers. Use by defining the RAID in the BIOS and the "ar driver will pick it up automagically...
2000-10-13 13:04:45 +00:00
#include <dev/ata/ata-raid.h>
Finally!! The much roumored replacement for our current IDE/ATA/ATAPI is materialising in the CVS repositories around the globe. So what does this bring us: A new reengineered ATA/ATAPI subsystem, that tries to overcome most of the deficiencies with the current drivers. It supports PCI as well as ISA devices without all the hackery in ide_pci.c to make PCI devices look like ISA counterparts. It doesn't have the excessive wait problem on probe, in fact you shouldn't notice any delay when your devices are getting probed. Probing and attaching of devices are postponed until interrupts are enabled (well almost, not finished yet for disks), making things alot cleaner. Improved performance, although DMA support is still WIP and not in this pre alpha release, worldstone is faster with the new driver compared to the old even with DMA. So what does it take away: There is NO support for old MFM/RLL/ESDI disks. There is NO support for bad144, if your disk is bad, ditch it, it has already outgrown its internal spare sectors, and is dying. For you to try this out, you will have to modify your kernel config file to use the "ata" controller instead of all wdc? entries. example: # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes #You should add the following on ISA systems: controller ata1 at isa? port "IO_WD1" bio irq 14 controller ata2 at isa? port "IO_WD2" bio irq 15 You can leave it all in there, the system knows how to manage. For now this driver reuses the device entries from the old system (that will probably change later), but remember that disks are now numbered in the sequence they are found (like the SCSI system) not as absolute positions as the old system. Although I have tested this on all the systems I can get my hands on, there might very well be gremlins in there, so use AT YOU OWN RISK!! This is still WIP, so there are lots of rough edges and unfinished things in there, and what I have in my lab might look very different from whats in CVS at any given time. So please have all eventual changes go through me, or chances are they just dissapears... I would very much like to hear from you, both good and bad news are very welcome. Enjoy!! -Søren
1999-03-01 21:19:19 +00:00
/* prototypes */
Unify prototypes. Cosmetics.
2003-08-25 09:01:49 +00:00
static void ad_detach(struct ata_device *);
Overhaul of the timeout/reinit framework. This should clear up most of the leftovers from the old version that really doesn't work anymore. Add a reset function for host-end of the ATA channel. This is needed for the SiI3112 in order to whack it back to reality if a device locks up the SATA interface (thereby preventing that we can reset the device). The result is that ATA now recovers from the timeouts that happens with the SiI3112A and more or less all disks based on old PATA electronics with a Marvell PATA->SATA converter. This includes lots of the popular SATA dongles and the WDC Raptor disks..
2004-01-11 22:08:34 +00:00
static void ad_config(struct ata_device *);
Unify prototypes. Cosmetics.
2003-08-25 09:01:49 +00:00
static void ad_start(struct ata_device *);
static void ad_done(struct ata_request *);
Convert to new disk API. Prodded by: phk
2003-02-25 15:33:36 +00:00
static disk_open_t adopen;
static disk_strategy_t adstrategy;
static dumper_t addump;
Unify prototypes. Cosmetics.
2003-08-25 09:01:49 +00:00
void ad_print(struct ad_softc *);
static int ad_version(u_int16_t);
Major update of the ATA RAID code, part 1: Overhaul of the attach/detach code and structures, there were some nasty bugs in the old implementation. This made it possible to collapse the ATA/ATAPI device control structures into one generic structure. A note here, the kernel is NOT ready for detach of active devices, it fails all over in random places, but for inactive devices it works. However for ATA RAID this works, since the RAID abstration layer insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the physical disks. Proberly detect the RAID's from the BIOS, and mark critical RAID1 arrays as such, but continue if there is enough of the mirror left to do so. Properly fail arrays on a live system. For RAID0 that means return EIO, and for RAID1 it means continue on the still working part of the mirror if possible, else return EIO. If the state changes, log this to the console. Allow for Promise & Highpoint controllers/arrays to coexist on the same machine. It is not possible to distribute arrays over different makes of controllers though. If Promise SuperSwap enclosures are used, signal disk state on the status LED on the front. Misc fixes that I had lying around for various minor bugs. Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
Nine'th update to the new ATA/ATAPI driver: The atapi subsystem has gotten better error handeling and timeouts, it also tries a REQUEST SENSE command when devices returns errors, to give a little more info as to what went wrong. It might be a little verbose for now, but I'm interested in as much feedback on errors as possible, especially timeouts, as I'm a bit in doubt if I've chosen resonable default values everywhere. The disk driver has been changed a bit to prepare for tagged queing, which is next on my list. The disk driver has grown a dump routine, I got one implementation from Darrell Anderson <anderson@cs.duke.edu> which also did partial dumps (usefull on big memory machines) I left out the partial stuff for now, and changed the rest alot to fit into the new ad_request framework. Some minor cleanups and rearrangements as well. As usual USE AT YOUR OWN RISK!!, this is still pre alpha level code. Especially the DMA support can hose your disk real bad if anything goes wrong, again you have been warned :) Notebook owners should be carefull that their machines dont suspend as this might cause trouble... But please tell me how it works for you! Enjoy! -Søren
1999-06-25 09:03:07 +00:00
/* internal vars */
Major update of the ATA RAID code, part 1: Overhaul of the attach/detach code and structures, there were some nasty bugs in the old implementation. This made it possible to collapse the ATA/ATAPI device control structures into one generic structure. A note here, the kernel is NOT ready for detach of active devices, it fails all over in random places, but for inactive devices it works. However for ATA RAID this works, since the RAID abstration layer insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the physical disks. Proberly detect the RAID's from the BIOS, and mark critical RAID1 arrays as such, but continue if there is enough of the mirror left to do so. Properly fail arrays on a live system. For RAID0 that means return EIO, and for RAID1 it means continue on the still working part of the mirror if possible, else return EIO. If the state changes, log this to the console. Allow for Promise & Highpoint controllers/arrays to coexist on the same machine. It is not possible to distribute arrays over different makes of controllers though. If Promise SuperSwap enclosures are used, signal disk state on the status LED on the front. Misc fixes that I had lying around for various minor bugs. Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
static MALLOC_DEFINE(M_AD, "AD driver", "ATA disk driver");
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
static u_int32_t adp_lun_map = 0;
Finally!! The much roumored replacement for our current IDE/ATA/ATAPI is materialising in the CVS repositories around the globe. So what does this bring us: A new reengineered ATA/ATAPI subsystem, that tries to overcome most of the deficiencies with the current drivers. It supports PCI as well as ISA devices without all the hackery in ide_pci.c to make PCI devices look like ISA counterparts. It doesn't have the excessive wait problem on probe, in fact you shouldn't notice any delay when your devices are getting probed. Probing and attaching of devices are postponed until interrupts are enabled (well almost, not finished yet for disks), making things alot cleaner. Improved performance, although DMA support is still WIP and not in this pre alpha release, worldstone is faster with the new driver compared to the old even with DMA. So what does it take away: There is NO support for old MFM/RLL/ESDI disks. There is NO support for bad144, if your disk is bad, ditch it, it has already outgrown its internal spare sectors, and is dying. For you to try this out, you will have to modify your kernel config file to use the "ata" controller instead of all wdc? entries. example: # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes #You should add the following on ISA systems: controller ata1 at isa? port "IO_WD1" bio irq 14 controller ata2 at isa? port "IO_WD2" bio irq 15 You can leave it all in there, the system knows how to manage. For now this driver reuses the device entries from the old system (that will probably change later), but remember that disks are now numbered in the sequence they are found (like the SCSI system) not as absolute positions as the old system. Although I have tested this on all the systems I can get my hands on, there might very well be gremlins in there, so use AT YOU OWN RISK!! This is still WIP, so there are lots of rough edges and unfinished things in there, and what I have in my lab might look very different from whats in CVS at any given time. So please have all eventual changes go through me, or chances are they just dissapears... I would very much like to hear from you, both good and bad news are very welcome. Enjoy!! -Søren
1999-03-01 21:19:19 +00:00
Rearrange the probecode, so that 80pin cables can be identified correctly on both master and slave. Smash together the ata_params & atapi_params structures as they are more or less equal anyways. Get rid of the last SYSINIT's in here.
2000-01-18 21:02:59 +00:00
void
Major update of the ATA RAID code, part 1: Overhaul of the attach/detach code and structures, there were some nasty bugs in the old implementation. This made it possible to collapse the ATA/ATAPI device control structures into one generic structure. A note here, the kernel is NOT ready for detach of active devices, it fails all over in random places, but for inactive devices it works. However for ATA RAID this works, since the RAID abstration layer insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the physical disks. Proberly detect the RAID's from the BIOS, and mark critical RAID1 arrays as such, but continue if there is enough of the mirror left to do so. Properly fail arrays on a live system. For RAID0 that means return EIO, and for RAID1 it means continue on the still working part of the mirror if possible, else return EIO. If the state changes, log this to the console. Allow for Promise & Highpoint controllers/arrays to coexist on the same machine. It is not possible to distribute arrays over different makes of controllers though. If Promise SuperSwap enclosures are used, signal disk state on the status LED on the front. Misc fixes that I had lying around for various minor bugs. Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
ad_attach(struct ata_device *atadev)
Finally!! The much roumored replacement for our current IDE/ATA/ATAPI is materialising in the CVS repositories around the globe. So what does this bring us: A new reengineered ATA/ATAPI subsystem, that tries to overcome most of the deficiencies with the current drivers. It supports PCI as well as ISA devices without all the hackery in ide_pci.c to make PCI devices look like ISA counterparts. It doesn't have the excessive wait problem on probe, in fact you shouldn't notice any delay when your devices are getting probed. Probing and attaching of devices are postponed until interrupts are enabled (well almost, not finished yet for disks), making things alot cleaner. Improved performance, although DMA support is still WIP and not in this pre alpha release, worldstone is faster with the new driver compared to the old even with DMA. So what does it take away: There is NO support for old MFM/RLL/ESDI disks. There is NO support for bad144, if your disk is bad, ditch it, it has already outgrown its internal spare sectors, and is dying. For you to try this out, you will have to modify your kernel config file to use the "ata" controller instead of all wdc? entries. example: # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes #You should add the following on ISA systems: controller ata1 at isa? port "IO_WD1" bio irq 14 controller ata2 at isa? port "IO_WD2" bio irq 15 You can leave it all in there, the system knows how to manage. For now this driver reuses the device entries from the old system (that will probably change later), but remember that disks are now numbered in the sequence they are found (like the SCSI system) not as absolute positions as the old system. Although I have tested this on all the systems I can get my hands on, there might very well be gremlins in there, so use AT YOU OWN RISK!! This is still WIP, so there are lots of rough edges and unfinished things in there, and what I have in my lab might look very different from whats in CVS at any given time. So please have all eventual changes go through me, or chances are they just dissapears... I would very much like to hear from you, both good and bad news are very welcome. Enjoy!! -Søren
1999-03-01 21:19:19 +00:00
{
struct ad_softc *adp;
Make the ATA driver compile & work on the sparc64 platform. Initial work & code by tmm. Lots of changes and rearrangements by yours truely to make busdma be a little less a PITA (but I still dont like it).
2002-04-05 13:13:56 +00:00
u_int32_t lbasize;
u_int64_t lbasize48;
Finally!! The much roumored replacement for our current IDE/ATA/ATAPI is materialising in the CVS repositories around the globe. So what does this bring us: A new reengineered ATA/ATAPI subsystem, that tries to overcome most of the deficiencies with the current drivers. It supports PCI as well as ISA devices without all the hackery in ide_pci.c to make PCI devices look like ISA counterparts. It doesn't have the excessive wait problem on probe, in fact you shouldn't notice any delay when your devices are getting probed. Probing and attaching of devices are postponed until interrupts are enabled (well almost, not finished yet for disks), making things alot cleaner. Improved performance, although DMA support is still WIP and not in this pre alpha release, worldstone is faster with the new driver compared to the old even with DMA. So what does it take away: There is NO support for old MFM/RLL/ESDI disks. There is NO support for bad144, if your disk is bad, ditch it, it has already outgrown its internal spare sectors, and is dying. For you to try this out, you will have to modify your kernel config file to use the "ata" controller instead of all wdc? entries. example: # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes #You should add the following on ISA systems: controller ata1 at isa? port "IO_WD1" bio irq 14 controller ata2 at isa? port "IO_WD2" bio irq 15 You can leave it all in there, the system knows how to manage. For now this driver reuses the device entries from the old system (that will probably change later), but remember that disks are now numbered in the sequence they are found (like the SCSI system) not as absolute positions as the old system. Although I have tested this on all the systems I can get my hands on, there might very well be gremlins in there, so use AT YOU OWN RISK!! This is still WIP, so there are lots of rough edges and unfinished things in there, and what I have in my lab might look very different from whats in CVS at any given time. So please have all eventual changes go through me, or chances are they just dissapears... I would very much like to hear from you, both good and bad news are very welcome. Enjoy!! -Søren
1999-03-01 21:19:19 +00:00
Use M_ZERO flag on malloc when approbiate.
2000-12-26 12:05:49 +00:00
if (!(adp = malloc(sizeof(struct ad_softc), M_AD, M_NOWAIT | M_ZERO))) {
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
ata_prtdev(atadev, "FAILURE - could not allocate driver storage\n");
atadev->attach = NULL;
Rearrange the probecode, so that 80pin cables can be identified correctly on both master and slave. Smash together the ata_params & atapi_params structures as they are more or less equal anyways. Get rid of the last SYSINIT's in here.
2000-01-18 21:02:59 +00:00
return;
Finally!! The much roumored replacement for our current IDE/ATA/ATAPI is materialising in the CVS repositories around the globe. So what does this bring us: A new reengineered ATA/ATAPI subsystem, that tries to overcome most of the deficiencies with the current drivers. It supports PCI as well as ISA devices without all the hackery in ide_pci.c to make PCI devices look like ISA counterparts. It doesn't have the excessive wait problem on probe, in fact you shouldn't notice any delay when your devices are getting probed. Probing and attaching of devices are postponed until interrupts are enabled (well almost, not finished yet for disks), making things alot cleaner. Improved performance, although DMA support is still WIP and not in this pre alpha release, worldstone is faster with the new driver compared to the old even with DMA. So what does it take away: There is NO support for old MFM/RLL/ESDI disks. There is NO support for bad144, if your disk is bad, ditch it, it has already outgrown its internal spare sectors, and is dying. For you to try this out, you will have to modify your kernel config file to use the "ata" controller instead of all wdc? entries. example: # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes #You should add the following on ISA systems: controller ata1 at isa? port "IO_WD1" bio irq 14 controller ata2 at isa? port "IO_WD2" bio irq 15 You can leave it all in there, the system knows how to manage. For now this driver reuses the device entries from the old system (that will probably change later), but remember that disks are now numbered in the sequence they are found (like the SCSI system) not as absolute positions as the old system. Although I have tested this on all the systems I can get my hands on, there might very well be gremlins in there, so use AT YOU OWN RISK!! This is still WIP, so there are lots of rough edges and unfinished things in there, and what I have in my lab might look very different from whats in CVS at any given time. So please have all eventual changes go through me, or chances are they just dissapears... I would very much like to hear from you, both good and bad news are very welcome. Enjoy!! -Søren
1999-03-01 21:19:19 +00:00
}
Overhaul of the timeout/reinit framework. This should clear up most of the leftovers from the old version that really doesn't work anymore. Add a reset function for host-end of the ATA channel. This is needed for the SiI3112 in order to whack it back to reality if a device locks up the SATA interface (thereby preventing that we can reset the device). The result is that ATA now recovers from the timeouts that happens with the SiI3112A and more or less all disks based on old PATA electronics with a Marvell PATA->SATA converter. This includes lots of the popular SATA dongles and the WDC Raptor disks..
2004-01-11 22:08:34 +00:00
atadev->softc = adp;
Major update of the ATA RAID code, part 1: Overhaul of the attach/detach code and structures, there were some nasty bugs in the old implementation. This made it possible to collapse the ATA/ATAPI device control structures into one generic structure. A note here, the kernel is NOT ready for detach of active devices, it fails all over in random places, but for inactive devices it works. However for ATA RAID this works, since the RAID abstration layer insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the physical disks. Proberly detect the RAID's from the BIOS, and mark critical RAID1 arrays as such, but continue if there is enough of the mirror left to do so. Properly fail arrays on a live system. For RAID0 that means return EIO, and for RAID1 it means continue on the still working part of the mirror if possible, else return EIO. If the state changes, log this to the console. Allow for Promise & Highpoint controllers/arrays to coexist on the same machine. It is not possible to distribute arrays over different makes of controllers though. If Promise SuperSwap enclosures are used, signal disk state on the status LED on the front. Misc fixes that I had lying around for various minor bugs. Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
adp->device = atadev;
Overhaul of the timeout/reinit framework. This should clear up most of the leftovers from the old version that really doesn't work anymore. Add a reset function for host-end of the ATA channel. This is needed for the SiI3112 in order to whack it back to reality if a device locks up the SATA interface (thereby preventing that we can reset the device). The result is that ATA now recovers from the timeouts that happens with the SiI3112A and more or less all disks based on old PATA electronics with a Marvell PATA->SATA converter. This includes lots of the popular SATA dongles and the WDC Raptor disks..
2004-01-11 22:08:34 +00:00
Update the ata driver to take more advantage of newbus, this was needed to make attach/detach of devices work, which is needed for the PCCARD support. (PCCARD support is still not working though, more to come on that) Support the CMD646 chip which is used on many alphas, sadly only in WDMA2 mode, as the silicon is broken beyond belief for UDMA modes. Lots of cosmetic fixes here and there. Sorry for the size of this megapatchfromhell but it was not possible otherwise... newbus patches based on work from: dfr (Doug Rabson)
2000-02-18 20:57:33 +00:00
#ifdef ATA_STATIC_ID
Major update of the ATA RAID code, part 1: Overhaul of the attach/detach code and structures, there were some nasty bugs in the old implementation. This made it possible to collapse the ATA/ATAPI device control structures into one generic structure. A note here, the kernel is NOT ready for detach of active devices, it fails all over in random places, but for inactive devices it works. However for ATA RAID this works, since the RAID abstration layer insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the physical disks. Proberly detect the RAID's from the BIOS, and mark critical RAID1 arrays as such, but continue if there is enough of the mirror left to do so. Properly fail arrays on a live system. For RAID0 that means return EIO, and for RAID1 it means continue on the still working part of the mirror if possible, else return EIO. If the state changes, log this to the console. Allow for Promise & Highpoint controllers/arrays to coexist on the same machine. It is not possible to distribute arrays over different makes of controllers though. If Promise SuperSwap enclosures are used, signal disk state on the status LED on the front. Misc fixes that I had lying around for various minor bugs. Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
adp->lun = (device_get_unit(atadev->channel->dev)<<1)+ATA_DEV(atadev->unit);
Update the ata driver to take more advantage of newbus, this was needed to make attach/detach of devices work, which is needed for the PCCARD support. (PCCARD support is still not working though, more to come on that) Support the CMD646 chip which is used on many alphas, sadly only in WDMA2 mode, as the silicon is broken beyond belief for UDMA modes. Lots of cosmetic fixes here and there. Sorry for the size of this megapatchfromhell but it was not possible otherwise... newbus patches based on work from: dfr (Doug Rabson)
2000-02-18 20:57:33 +00:00
#else
adp->lun = ata_get_lun(&adp_lun_map);
#endif
Major update of the ATA RAID code, part 1: Overhaul of the attach/detach code and structures, there were some nasty bugs in the old implementation. This made it possible to collapse the ATA/ATAPI device control structures into one generic structure. A note here, the kernel is NOT ready for detach of active devices, it fails all over in random places, but for inactive devices it works. However for ATA RAID this works, since the RAID abstration layer insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the physical disks. Proberly detect the RAID's from the BIOS, and mark critical RAID1 arrays as such, but continue if there is enough of the mirror left to do so. Properly fail arrays on a live system. For RAID0 that means return EIO, and for RAID1 it means continue on the still working part of the mirror if possible, else return EIO. If the state changes, log this to the console. Allow for Promise & Highpoint controllers/arrays to coexist on the same machine. It is not possible to distribute arrays over different makes of controllers though. If Promise SuperSwap enclosures are used, signal disk state on the status LED on the front. Misc fixes that I had lying around for various minor bugs. Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
ata_set_name(atadev, "ad", adp->lun);
adp->heads = atadev->param->heads;
adp->sectors = atadev->param->sectors;
adp->total_secs = atadev->param->cylinders * adp->heads * adp->sectors;
This should be the way PC98 ATA disks are seen geometry wise. Should go into 5_0_RELEASE as well.
2002-12-17 16:26:22 +00:00
if (adp->device->channel->flags & ATA_USE_PC98GEOM &&
adp->total_secs < 17 * 8 * 65536) {
adp->sectors = 17;
adp->heads = 8;
}
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
mtx_init(&adp->queue_mtx, "ATA disk bioqueue lock", MTX_DEF, 0);
Add new support for locking an ATA channel and use that throughout the ATA/ATAPI driver. This solves the concurrency problem with the new GEOM code, and also cuts a good deal of the patch size in the upcoming MFC.
2002-03-11 21:04:32 +00:00
bioq_init(&adp->queue);
Rearrange the probecode, so that 80pin cables can be identified correctly on both master and slave. Smash together the ata_params & atapi_params structures as they are more or less equal anyways. Get rid of the last SYSINIT's in here.
2000-01-18 21:02:59 +00:00
Cleanups.
2002-04-05 18:04:05 +00:00
lbasize = (u_int32_t)atadev->param->lba_size_1 |
((u_int32_t)atadev->param->lba_size_2 << 16);
Make the ATA driver compile & work on the sparc64 platform. Initial work & code by tmm. Lots of changes and rearrangements by yours truely to make busdma be a little less a PITA (but I still dont like it).
2002-04-05 13:13:56 +00:00
Update with latest ATA/ATAPI ver 6 rev 2 items.
2001-10-06 11:07:04 +00:00
/* does this device need oldstyle CHS addressing */
Add support for the Promise command sequencer present on all modern Promise controllers (PDC203** PDC206**). This also adds preliminary support for the Promise SX4/SX4000 but *only* as a "normal" Promise ATA controller (ATA RAID's are supported though but only RAID0, RAID1 and RAID0+1). This cuts off yet another 5-8% of the command overhead on promise controllers, making them the fastest we have ever had support for. Work is now continuing to add support for this in ATA RAID, to accellerate ATA RAID quite a bit on these controllers, and especially the SX4/SX4000 series as they have quite a few tricks in there.. This commit also adds a few fixes to the SATA code needed for proper support.
2004-04-13 09:44:20 +00:00
if (!ad_version(atadev->param->version_major) || !lbasize)
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
atadev->flags |= ATA_D_USE_CHS;
Update with latest ATA/ATAPI ver 6 rev 2 items.
2001-10-06 11:07:04 +00:00
Relax the test for when to use LBA instead of CHS size.
2003-05-01 06:17:30 +00:00
/* use the 28bit LBA size if valid or bigger than the CHS mapping */
if (atadev->param->cylinders == 16383 || adp->total_secs < lbasize)
Make the ATA driver compile & work on the sparc64 platform. Initial work & code by tmm. Lots of changes and rearrangements by yours truely to make busdma be a little less a PITA (but I still dont like it).
2002-04-05 13:13:56 +00:00
adp->total_secs = lbasize;
Cleanups.
2002-04-05 18:04:05 +00:00
lbasize48 = ((u_int64_t)atadev->param->lba_size48_1) |
((u_int64_t)atadev->param->lba_size48_2 << 16) |
((u_int64_t)atadev->param->lba_size48_3 << 32) |
((u_int64_t)atadev->param->lba_size48_4 << 48);
Update with latest ATA/ATAPI ver 6 rev 2 items.
2001-10-06 11:07:04 +00:00
/* use the 48bit LBA size if valid */
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
if ((atadev->param->support.command2 & ATA_SUPPORT_ADDRESS48) &&
lbasize48 > 268435455)
Make the ATA driver compile & work on the sparc64 platform. Initial work & code by tmm. Lots of changes and rearrangements by yours truely to make busdma be a little less a PITA (but I still dont like it).
2002-04-05 13:13:56 +00:00
adp->total_secs = lbasize48;
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
/* setup the function ptrs */
atadev->detach = ad_detach;
Overhaul of the timeout/reinit framework. This should clear up most of the leftovers from the old version that really doesn't work anymore. Add a reset function for host-end of the ATA channel. This is needed for the SiI3112 in order to whack it back to reality if a device locks up the SATA interface (thereby preventing that we can reset the device). The result is that ATA now recovers from the timeouts that happens with the SiI3112A and more or less all disks based on old PATA electronics with a Marvell PATA->SATA converter. This includes lots of the popular SATA dongles and the WDC Raptor disks..
2004-01-11 22:08:34 +00:00
atadev->config = ad_config;
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
atadev->start = ad_start;
Overhaul of the timeout/reinit framework. This should clear up most of the leftovers from the old version that really doesn't work anymore. Add a reset function for host-end of the ATA channel. This is needed for the SiI3112 in order to whack it back to reality if a device locks up the SATA interface (thereby preventing that we can reset the device). The result is that ATA now recovers from the timeouts that happens with the SiI3112A and more or less all disks based on old PATA electronics with a Marvell PATA->SATA converter. This includes lots of the popular SATA dongles and the WDC Raptor disks..
2004-01-11 22:08:34 +00:00
/* config device features */
ad_config(atadev);
Add new support for locking an ATA channel and use that throughout the ATA/ATAPI driver. This solves the concurrency problem with the new GEOM code, and also cuts a good deal of the patch size in the upcoming MFC.
2002-03-11 21:04:32 +00:00
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
/* lets create the disk device */
Change the disk(9) API in order to make device removal more robust. Previously the "struct disk" were owned by the device driver and this gave us problems when the device disappared and the users of that device were not immediately disappearing. Now the struct disk is allocate with a new call, disk_alloc() and owned by geom_disk and just abandonned by the device driver when disk_create() is called. Unfortunately, this results in a ton of "s/\./->/" changes to device drivers. Since I'm doing the sweep anyway, a couple of other API improvements have been carried out at the same time: The Giant awareness flag has been flipped from DISKFLAG_NOGIANT to DISKFLAG_NEEDSGIANT A version number have been added to disk_create() so that we can detect, report and ignore binary drivers with old ABI in the future. Manual page update to follow shortly.
2004-02-18 21:36:53 +00:00
adp->disk = disk_alloc();
adp->disk->d_open = adopen;
adp->disk->d_strategy = adstrategy;
adp->disk->d_dump = addump;
adp->disk->d_name = "ad";
adp->disk->d_drv1 = adp;
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
if (atadev->channel->dma)
Change the disk(9) API in order to make device removal more robust. Previously the "struct disk" were owned by the device driver and this gave us problems when the device disappared and the users of that device were not immediately disappearing. Now the struct disk is allocate with a new call, disk_alloc() and owned by geom_disk and just abandonned by the device driver when disk_create() is called. Unfortunately, this results in a ton of "s/\./->/" changes to device drivers. Since I'm doing the sweep anyway, a couple of other API improvements have been carried out at the same time: The Giant awareness flag has been flipped from DISKFLAG_NOGIANT to DISKFLAG_NEEDSGIANT A version number have been added to disk_create() so that we can detect, report and ignore binary drivers with old ABI in the future. Manual page update to follow shortly.
2004-02-18 21:36:53 +00:00
adp->disk->d_maxsize = atadev->channel->dma->max_iosize;
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
else
Change the disk(9) API in order to make device removal more robust. Previously the "struct disk" were owned by the device driver and this gave us problems when the device disappared and the users of that device were not immediately disappearing. Now the struct disk is allocate with a new call, disk_alloc() and owned by geom_disk and just abandonned by the device driver when disk_create() is called. Unfortunately, this results in a ton of "s/\./->/" changes to device drivers. Since I'm doing the sweep anyway, a couple of other API improvements have been carried out at the same time: The Giant awareness flag has been flipped from DISKFLAG_NOGIANT to DISKFLAG_NEEDSGIANT A version number have been added to disk_create() so that we can detect, report and ignore binary drivers with old ABI in the future. Manual page update to follow shortly.
2004-02-18 21:36:53 +00:00
adp->disk->d_maxsize = DFLTPHYS;
adp->disk->d_sectorsize = DEV_BSIZE;
adp->disk->d_mediasize = DEV_BSIZE * (off_t)adp->total_secs;
adp->disk->d_fwsectors = adp->sectors;
adp->disk->d_fwheads = adp->heads;
adp->disk->d_unit = adp->lun;
disk_create(adp->disk, DISK_VERSION);
Move the disklabel construction to the attach function instead of in open. This prevent panics when a the disklabel is accessed on an ATA-RAID subdisk.
2001-04-27 19:47:33 +00:00
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
/* announce we are here */
ad_print(adp);
Major update of the ATA RAID code, part 1: Overhaul of the attach/detach code and structures, there were some nasty bugs in the old implementation. This made it possible to collapse the ATA/ATAPI device control structures into one generic structure. A note here, the kernel is NOT ready for detach of active devices, it fails all over in random places, but for inactive devices it works. However for ATA RAID this works, since the RAID abstration layer insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the physical disks. Proberly detect the RAID's from the BIOS, and mark critical RAID1 arrays as such, but continue if there is enough of the mirror left to do so. Properly fail arrays on a live system. For RAID0 that means return EIO, and for RAID1 it means continue on the still working part of the mirror if possible, else return EIO. If the state changes, log this to the console. Allow for Promise & Highpoint controllers/arrays to coexist on the same machine. It is not possible to distribute arrays over different makes of controllers though. If Promise SuperSwap enclosures are used, signal disk state on the status LED on the front. Misc fixes that I had lying around for various minor bugs. Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
#ifdef DEV_ATARAID
Add ioctl to add a spare disk to a RAID array. Fix the discovery of RAID's to not grap unused disks. Change the probe printing of a RAID a bit.
2003-05-02 12:41:44 +00:00
ata_raiddisk_attach(adp);
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
#endif
Now all actual probing of both ATA & ATAPI devices are done after interrupts are enabled, this kills the last "unwanted interrupts" (and there is no ugly hacks like in the old driver to avoid them). COmmand interrupt devices are now supported, this applies mostly to older CDROM's and apparently also the ZIP. Fixed problems: Number of total sectors wrong on some older drives. Fixed by not using the LBA size unless we know its valid. There has also been more general code clenaups, some reorgs also.
1999-03-05 09:43:30 +00:00
}
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
static void
Add flushing of devices on shutdown. Note: this might print failure messages on some systems, unfortunatly the info from the device, stating if flushing is supported, cannot be trusted so the operation is always issued on all devices, just in case...
2003-05-02 13:47:44 +00:00
ad_detach(struct ata_device *atadev)
Update the ata driver to take more advantage of newbus, this was needed to make attach/detach of devices work, which is needed for the PCCARD support. (PCCARD support is still not working though, more to come on that) Support the CMD646 chip which is used on many alphas, sadly only in WDMA2 mode, as the silicon is broken beyond belief for UDMA modes. Lots of cosmetic fixes here and there. Sorry for the size of this megapatchfromhell but it was not possible otherwise... newbus patches based on work from: dfr (Doug Rabson)
2000-02-18 20:57:33 +00:00
{
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
struct ad_softc *adp = atadev->softc;
Refine the detach/attach code. Proberly fail outstanding bio requests on devices that are detached. This makes it possible to change between disk/cdrom/dvd/whathaveyou in a notebook, just by suspending it, changing the device in the bay (or what you model calls it), unsuspend and the ATA driver will figure out what disappeared and properly fail those, and attach any new devices found.
2001-03-14 12:05:44 +00:00
Major update of the ATA RAID code, part 1: Overhaul of the attach/detach code and structures, there were some nasty bugs in the old implementation. This made it possible to collapse the ATA/ATAPI device control structures into one generic structure. A note here, the kernel is NOT ready for detach of active devices, it fails all over in random places, but for inactive devices it works. However for ATA RAID this works, since the RAID abstration layer insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the physical disks. Proberly detect the RAID's from the BIOS, and mark critical RAID1 arrays as such, but continue if there is enough of the mirror left to do so. Properly fail arrays on a live system. For RAID0 that means return EIO, and for RAID1 it means continue on the still working part of the mirror if possible, else return EIO. If the state changes, log this to the console. Allow for Promise & Highpoint controllers/arrays to coexist on the same machine. It is not possible to distribute arrays over different makes of controllers though. If Promise SuperSwap enclosures are used, signal disk state on the status LED on the front. Misc fixes that I had lying around for various minor bugs. Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
atadev->flags |= ATA_D_DETACHING;
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
#ifdef DEV_ATARAID
Second round of updates to the ATA driver. Clean up the DMA interface too much unneeded stuff crept in with the busdma code back when. Modify the ATA_IN* / ATA_OUT* macros so that resource and offset are gotten from a table. That allows for new chipsets that doesn't nessesarily have things ordered the good old way. This also removes the need for the wierd PC98 resource functions. Tested on: i386, PC98, Alpha, Sparc64
2003-03-29 13:37:09 +00:00
if (adp->flags & AD_F_RAID_SUBDISK)
ata_raiddisk_detach(adp);
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
#endif
mtx_lock(&adp->queue_mtx);
bioq_flush(&adp->queue, NULL, ENXIO);
mtx_unlock(&adp->queue_mtx);
Remember to mtx_destroy mutexes.
2004-03-01 13:17:07 +00:00
mtx_destroy(&adp->queue_mtx);
Change the disk(9) API in order to make device removal more robust. Previously the "struct disk" were owned by the device driver and this gave us problems when the device disappared and the users of that device were not immediately disappearing. Now the struct disk is allocate with a new call, disk_alloc() and owned by geom_disk and just abandonned by the device driver when disk_create() is called. Unfortunately, this results in a ton of "s/\./->/" changes to device drivers. Since I'm doing the sweep anyway, a couple of other API improvements have been carried out at the same time: The Giant awareness flag has been flipped from DISKFLAG_NOGIANT to DISKFLAG_NEEDSGIANT A version number have been added to disk_create() so that we can detect, report and ignore binary drivers with old ABI in the future. Manual page update to follow shortly.
2004-02-18 21:36:53 +00:00
disk_destroy(adp->disk);
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
ata_prtdev(atadev, "WARNING - removed from configuration\n");
Major update of the ATA RAID code, part 1: Overhaul of the attach/detach code and structures, there were some nasty bugs in the old implementation. This made it possible to collapse the ATA/ATAPI device control structures into one generic structure. A note here, the kernel is NOT ready for detach of active devices, it fails all over in random places, but for inactive devices it works. However for ATA RAID this works, since the RAID abstration layer insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the physical disks. Proberly detect the RAID's from the BIOS, and mark critical RAID1 arrays as such, but continue if there is enough of the mirror left to do so. Properly fail arrays on a live system. For RAID0 that means return EIO, and for RAID1 it means continue on the still working part of the mirror if possible, else return EIO. If the state changes, log this to the console. Allow for Promise & Highpoint controllers/arrays to coexist on the same machine. It is not possible to distribute arrays over different makes of controllers though. If Promise SuperSwap enclosures are used, signal disk state on the status LED on the front. Misc fixes that I had lying around for various minor bugs. Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
ata_free_name(atadev);
Update the ata driver to take more advantage of newbus, this was needed to make attach/detach of devices work, which is needed for the PCCARD support. (PCCARD support is still not working though, more to come on that) Support the CMD646 chip which is used on many alphas, sadly only in WDMA2 mode, as the silicon is broken beyond belief for UDMA modes. Lots of cosmetic fixes here and there. Sorry for the size of this megapatchfromhell but it was not possible otherwise... newbus patches based on work from: dfr (Doug Rabson)
2000-02-18 20:57:33 +00:00
ata_free_lun(&adp_lun_map, adp->lun);
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
atadev->attach = NULL;
atadev->detach = NULL;
atadev->start = NULL;
atadev->softc = NULL;
Major update of the ATA RAID code, part 2: More cleanups of the RAID1 failure mode code. Add functionality that writes the changed RAID config setup back to the disks (in controller BIOS specific format), so that a reboot will make the BIOS pick up the changed config.
2002-02-12 11:35:15 +00:00
atadev->flags = 0;
Update the ata driver to take more advantage of newbus, this was needed to make attach/detach of devices work, which is needed for the PCCARD support. (PCCARD support is still not working though, more to come on that) Support the CMD646 chip which is used on many alphas, sadly only in WDMA2 mode, as the silicon is broken beyond belief for UDMA modes. Lots of cosmetic fixes here and there. Sorry for the size of this megapatchfromhell but it was not possible otherwise... newbus patches based on work from: dfr (Doug Rabson)
2000-02-18 20:57:33 +00:00
free(adp, M_AD);
}
Overhaul of the timeout/reinit framework. This should clear up most of the leftovers from the old version that really doesn't work anymore. Add a reset function for host-end of the ATA channel. This is needed for the SiI3112 in order to whack it back to reality if a device locks up the SATA interface (thereby preventing that we can reset the device). The result is that ATA now recovers from the timeouts that happens with the SiI3112A and more or less all disks based on old PATA electronics with a Marvell PATA->SATA converter. This includes lots of the popular SATA dongles and the WDC Raptor disks..
2004-01-11 22:08:34 +00:00
static void
ad_config(struct ata_device *atadev)
{
struct ad_softc *adp = atadev->softc;
/* enable read caching */
ata_controlcmd(atadev, ATA_SETFEATURES, ATA_SF_ENAB_RCACHE, 0, 0);
/* enable write caching if enabled */
if (ata_wc)
ata_controlcmd(atadev, ATA_SETFEATURES, ATA_SF_ENAB_WCACHE, 0, 0);
else
ata_controlcmd(atadev, ATA_SETFEATURES, ATA_SF_DIS_WCACHE, 0, 0);
/* use multiple sectors/interrupt if device supports it */
adp->max_iosize = DEV_BSIZE;
if (ad_version(atadev->param->version_major)) {
int secsperint = max(1, min(atadev->param->sectors_intr, 16));
if (!ata_controlcmd(atadev, ATA_SET_MULTI, 0, 0, secsperint))
adp->max_iosize = secsperint * DEV_BSIZE;
}
}
Now all actual probing of both ATA & ATAPI devices are done after interrupts are enabled, this kills the last "unwanted interrupts" (and there is no ugly hacks like in the old driver to avoid them). COmmand interrupt devices are now supported, this applies mostly to older CDROM's and apparently also the ZIP. Fixed problems: Number of total sectors wrong on some older drives. Fixed by not using the LBA size unless we know its valid. There has also been more general code clenaups, some reorgs also.
1999-03-05 09:43:30 +00:00
static int
Convert to new disk API. Prodded by: phk
2003-02-25 15:33:36 +00:00
adopen(struct disk *dp)
Finally!! The much roumored replacement for our current IDE/ATA/ATAPI is materialising in the CVS repositories around the globe. So what does this bring us: A new reengineered ATA/ATAPI subsystem, that tries to overcome most of the deficiencies with the current drivers. It supports PCI as well as ISA devices without all the hackery in ide_pci.c to make PCI devices look like ISA counterparts. It doesn't have the excessive wait problem on probe, in fact you shouldn't notice any delay when your devices are getting probed. Probing and attaching of devices are postponed until interrupts are enabled (well almost, not finished yet for disks), making things alot cleaner. Improved performance, although DMA support is still WIP and not in this pre alpha release, worldstone is faster with the new driver compared to the old even with DMA. So what does it take away: There is NO support for old MFM/RLL/ESDI disks. There is NO support for bad144, if your disk is bad, ditch it, it has already outgrown its internal spare sectors, and is dying. For you to try this out, you will have to modify your kernel config file to use the "ata" controller instead of all wdc? entries. example: # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes #You should add the following on ISA systems: controller ata1 at isa? port "IO_WD1" bio irq 14 controller ata2 at isa? port "IO_WD2" bio irq 15 You can leave it all in there, the system knows how to manage. For now this driver reuses the device entries from the old system (that will probably change later), but remember that disks are now numbered in the sequence they are found (like the SCSI system) not as absolute positions as the old system. Although I have tested this on all the systems I can get my hands on, there might very well be gremlins in there, so use AT YOU OWN RISK!! This is still WIP, so there are lots of rough edges and unfinished things in there, and what I have in my lab might look very different from whats in CVS at any given time. So please have all eventual changes go through me, or chances are they just dissapears... I would very much like to hear from you, both good and bad news are very welcome. Enjoy!! -Søren
1999-03-01 21:19:19 +00:00
{
Convert to new disk API. Prodded by: phk
2003-02-25 15:33:36 +00:00
struct ad_softc *adp = dp->d_drv1;
Finally!! The much roumored replacement for our current IDE/ATA/ATAPI is materialising in the CVS repositories around the globe. So what does this bring us: A new reengineered ATA/ATAPI subsystem, that tries to overcome most of the deficiencies with the current drivers. It supports PCI as well as ISA devices without all the hackery in ide_pci.c to make PCI devices look like ISA counterparts. It doesn't have the excessive wait problem on probe, in fact you shouldn't notice any delay when your devices are getting probed. Probing and attaching of devices are postponed until interrupts are enabled (well almost, not finished yet for disks), making things alot cleaner. Improved performance, although DMA support is still WIP and not in this pre alpha release, worldstone is faster with the new driver compared to the old even with DMA. So what does it take away: There is NO support for old MFM/RLL/ESDI disks. There is NO support for bad144, if your disk is bad, ditch it, it has already outgrown its internal spare sectors, and is dying. For you to try this out, you will have to modify your kernel config file to use the "ata" controller instead of all wdc? entries. example: # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes #You should add the following on ISA systems: controller ata1 at isa? port "IO_WD1" bio irq 14 controller ata2 at isa? port "IO_WD2" bio irq 15 You can leave it all in there, the system knows how to manage. For now this driver reuses the device entries from the old system (that will probably change later), but remember that disks are now numbered in the sequence they are found (like the SCSI system) not as absolute positions as the old system. Although I have tested this on all the systems I can get my hands on, there might very well be gremlins in there, so use AT YOU OWN RISK!! This is still WIP, so there are lots of rough edges and unfinished things in there, and what I have in my lab might look very different from whats in CVS at any given time. So please have all eventual changes go through me, or chances are they just dissapears... I would very much like to hear from you, both good and bad news are very welcome. Enjoy!! -Søren
1999-03-01 21:19:19 +00:00
Change the disk(9) API in order to make device removal more robust. Previously the "struct disk" were owned by the device driver and this gave us problems when the device disappared and the users of that device were not immediately disappearing. Now the struct disk is allocate with a new call, disk_alloc() and owned by geom_disk and just abandonned by the device driver when disk_create() is called. Unfortunately, this results in a ton of "s/\./->/" changes to device drivers. Since I'm doing the sweep anyway, a couple of other API improvements have been carried out at the same time: The Giant awareness flag has been flipped from DISKFLAG_NOGIANT to DISKFLAG_NEEDSGIANT A version number have been added to disk_create() so that we can detect, report and ignore binary drivers with old ABI in the future. Manual page update to follow shortly.
2004-02-18 21:36:53 +00:00
if (adp == NULL || adp->device->flags & ATA_D_DETACHING)
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
return ENXIO;
Finally!! The much roumored replacement for our current IDE/ATA/ATAPI is materialising in the CVS repositories around the globe. So what does this bring us: A new reengineered ATA/ATAPI subsystem, that tries to overcome most of the deficiencies with the current drivers. It supports PCI as well as ISA devices without all the hackery in ide_pci.c to make PCI devices look like ISA counterparts. It doesn't have the excessive wait problem on probe, in fact you shouldn't notice any delay when your devices are getting probed. Probing and attaching of devices are postponed until interrupts are enabled (well almost, not finished yet for disks), making things alot cleaner. Improved performance, although DMA support is still WIP and not in this pre alpha release, worldstone is faster with the new driver compared to the old even with DMA. So what does it take away: There is NO support for old MFM/RLL/ESDI disks. There is NO support for bad144, if your disk is bad, ditch it, it has already outgrown its internal spare sectors, and is dying. For you to try this out, you will have to modify your kernel config file to use the "ata" controller instead of all wdc? entries. example: # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes #You should add the following on ISA systems: controller ata1 at isa? port "IO_WD1" bio irq 14 controller ata2 at isa? port "IO_WD2" bio irq 15 You can leave it all in there, the system knows how to manage. For now this driver reuses the device entries from the old system (that will probably change later), but remember that disks are now numbered in the sequence they are found (like the SCSI system) not as absolute positions as the old system. Although I have tested this on all the systems I can get my hands on, there might very well be gremlins in there, so use AT YOU OWN RISK!! This is still WIP, so there are lots of rough edges and unfinished things in there, and what I have in my lab might look very different from whats in CVS at any given time. So please have all eventual changes go through me, or chances are they just dissapears... I would very much like to hear from you, both good and bad news are very welcome. Enjoy!! -Søren
1999-03-01 21:19:19 +00:00
return 0;
}
static void
Complete the bio/buf divorce for all code below devfs::strategy Exceptions: Vinum untouched. This means that it cannot be compiled. Greg Lehey is on the case. CCD not converted yet, casts to struct buf (still safe) atapi-cd casts to struct buf to examine B_PHYS
2000-04-15 05:54:02 +00:00
adstrategy(struct bio *bp)
Finally!! The much roumored replacement for our current IDE/ATA/ATAPI is materialising in the CVS repositories around the globe. So what does this bring us: A new reengineered ATA/ATAPI subsystem, that tries to overcome most of the deficiencies with the current drivers. It supports PCI as well as ISA devices without all the hackery in ide_pci.c to make PCI devices look like ISA counterparts. It doesn't have the excessive wait problem on probe, in fact you shouldn't notice any delay when your devices are getting probed. Probing and attaching of devices are postponed until interrupts are enabled (well almost, not finished yet for disks), making things alot cleaner. Improved performance, although DMA support is still WIP and not in this pre alpha release, worldstone is faster with the new driver compared to the old even with DMA. So what does it take away: There is NO support for old MFM/RLL/ESDI disks. There is NO support for bad144, if your disk is bad, ditch it, it has already outgrown its internal spare sectors, and is dying. For you to try this out, you will have to modify your kernel config file to use the "ata" controller instead of all wdc? entries. example: # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes #You should add the following on ISA systems: controller ata1 at isa? port "IO_WD1" bio irq 14 controller ata2 at isa? port "IO_WD2" bio irq 15 You can leave it all in there, the system knows how to manage. For now this driver reuses the device entries from the old system (that will probably change later), but remember that disks are now numbered in the sequence they are found (like the SCSI system) not as absolute positions as the old system. Although I have tested this on all the systems I can get my hands on, there might very well be gremlins in there, so use AT YOU OWN RISK!! This is still WIP, so there are lots of rough edges and unfinished things in there, and what I have in my lab might look very different from whats in CVS at any given time. So please have all eventual changes go through me, or chances are they just dissapears... I would very much like to hear from you, both good and bad news are very welcome. Enjoy!! -Søren
1999-03-01 21:19:19 +00:00
{
Convert to new disk API. Prodded by: phk
2003-02-25 15:33:36 +00:00
struct ad_softc *adp = bp->bio_disk->d_drv1;
Finally!! The much roumored replacement for our current IDE/ATA/ATAPI is materialising in the CVS repositories around the globe. So what does this bring us: A new reengineered ATA/ATAPI subsystem, that tries to overcome most of the deficiencies with the current drivers. It supports PCI as well as ISA devices without all the hackery in ide_pci.c to make PCI devices look like ISA counterparts. It doesn't have the excessive wait problem on probe, in fact you shouldn't notice any delay when your devices are getting probed. Probing and attaching of devices are postponed until interrupts are enabled (well almost, not finished yet for disks), making things alot cleaner. Improved performance, although DMA support is still WIP and not in this pre alpha release, worldstone is faster with the new driver compared to the old even with DMA. So what does it take away: There is NO support for old MFM/RLL/ESDI disks. There is NO support for bad144, if your disk is bad, ditch it, it has already outgrown its internal spare sectors, and is dying. For you to try this out, you will have to modify your kernel config file to use the "ata" controller instead of all wdc? entries. example: # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes #You should add the following on ISA systems: controller ata1 at isa? port "IO_WD1" bio irq 14 controller ata2 at isa? port "IO_WD2" bio irq 15 You can leave it all in there, the system knows how to manage. For now this driver reuses the device entries from the old system (that will probably change later), but remember that disks are now numbered in the sequence they are found (like the SCSI system) not as absolute positions as the old system. Although I have tested this on all the systems I can get my hands on, there might very well be gremlins in there, so use AT YOU OWN RISK!! This is still WIP, so there are lots of rough edges and unfinished things in there, and what I have in my lab might look very different from whats in CVS at any given time. So please have all eventual changes go through me, or chances are they just dissapears... I would very much like to hear from you, both good and bad news are very welcome. Enjoy!! -Søren
1999-03-01 21:19:19 +00:00
Major update of the ATA RAID code, part 1: Overhaul of the attach/detach code and structures, there were some nasty bugs in the old implementation. This made it possible to collapse the ATA/ATAPI device control structures into one generic structure. A note here, the kernel is NOT ready for detach of active devices, it fails all over in random places, but for inactive devices it works. However for ATA RAID this works, since the RAID abstration layer insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the physical disks. Proberly detect the RAID's from the BIOS, and mark critical RAID1 arrays as such, but continue if there is enough of the mirror left to do so. Properly fail arrays on a live system. For RAID0 that means return EIO, and for RAID1 it means continue on the still working part of the mirror if possible, else return EIO. If the state changes, log this to the console. Allow for Promise & Highpoint controllers/arrays to coexist on the same machine. It is not possible to distribute arrays over different makes of controllers though. If Promise SuperSwap enclosures are used, signal disk state on the status LED on the front. Misc fixes that I had lying around for various minor bugs. Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
if (adp->device->flags & ATA_D_DETACHING) {
Actually biofinish(struct bio *, struct devstat *, int error) is more general than the bioerror(). Most of this patch is generated by scripts.
2001-05-06 20:00:03 +00:00
biofinish(bp, NULL, ENXIO);
Refine the detach/attach code. Proberly fail outstanding bio requests on devices that are detached. This makes it possible to change between disk/cdrom/dvd/whathaveyou in a notebook, just by suspending it, changing the device in the bay (or what you model calls it), unsuspend and the ATA driver will figure out what disappeared and properly fail those, and attach any new devices found.
2001-03-14 12:05:44 +00:00
return;
}
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
mtx_lock(&adp->queue_mtx);
Use bioq_flush() to drain a bio queue with a specific error code. Retain the mistake of not updating the devstat API for now. Spell bioq_disksort() consistently with the remaining bioq_*(). #include <geom/geom_disk.h> where this is more appropriate.
2003-04-01 15:06:26 +00:00
bioq_disksort(&adp->queue, bp);
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
mtx_unlock(&adp->queue_mtx);
Add new support for locking an ATA channel and use that throughout the ATA/ATAPI driver. This solves the concurrency problem with the new GEOM code, and also cuts a good deal of the patch size in the upcoming MFC.
2002-03-11 21:04:32 +00:00
ata_start(adp->device->channel);
Finally!! The much roumored replacement for our current IDE/ATA/ATAPI is materialising in the CVS repositories around the globe. So what does this bring us: A new reengineered ATA/ATAPI subsystem, that tries to overcome most of the deficiencies with the current drivers. It supports PCI as well as ISA devices without all the hackery in ide_pci.c to make PCI devices look like ISA counterparts. It doesn't have the excessive wait problem on probe, in fact you shouldn't notice any delay when your devices are getting probed. Probing and attaching of devices are postponed until interrupts are enabled (well almost, not finished yet for disks), making things alot cleaner. Improved performance, although DMA support is still WIP and not in this pre alpha release, worldstone is faster with the new driver compared to the old even with DMA. So what does it take away: There is NO support for old MFM/RLL/ESDI disks. There is NO support for bad144, if your disk is bad, ditch it, it has already outgrown its internal spare sectors, and is dying. For you to try this out, you will have to modify your kernel config file to use the "ata" controller instead of all wdc? entries. example: # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes #You should add the following on ISA systems: controller ata1 at isa? port "IO_WD1" bio irq 14 controller ata2 at isa? port "IO_WD2" bio irq 15 You can leave it all in there, the system knows how to manage. For now this driver reuses the device entries from the old system (that will probably change later), but remember that disks are now numbered in the sequence they are found (like the SCSI system) not as absolute positions as the old system. Although I have tested this on all the systems I can get my hands on, there might very well be gremlins in there, so use AT YOU OWN RISK!! This is still WIP, so there are lots of rough edges and unfinished things in there, and what I have in my lab might look very different from whats in CVS at any given time. So please have all eventual changes go through me, or chances are they just dissapears... I would very much like to hear from you, both good and bad news are very welcome. Enjoy!! -Søren
1999-03-01 21:19:19 +00:00
}
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
static void
Major update of the ATA RAID code, part 1: Overhaul of the attach/detach code and structures, there were some nasty bugs in the old implementation. This made it possible to collapse the ATA/ATAPI device control structures into one generic structure. A note here, the kernel is NOT ready for detach of active devices, it fails all over in random places, but for inactive devices it works. However for ATA RAID this works, since the RAID abstration layer insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the physical disks. Proberly detect the RAID's from the BIOS, and mark critical RAID1 arrays as such, but continue if there is enough of the mirror left to do so. Properly fail arrays on a live system. For RAID0 that means return EIO, and for RAID1 it means continue on the still working part of the mirror if possible, else return EIO. If the state changes, log this to the console. Allow for Promise & Highpoint controllers/arrays to coexist on the same machine. It is not possible to distribute arrays over different makes of controllers though. If Promise SuperSwap enclosures are used, signal disk state on the status LED on the front. Misc fixes that I had lying around for various minor bugs. Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
ad_start(struct ata_device *atadev)
Finally!! The much roumored replacement for our current IDE/ATA/ATAPI is materialising in the CVS repositories around the globe. So what does this bring us: A new reengineered ATA/ATAPI subsystem, that tries to overcome most of the deficiencies with the current drivers. It supports PCI as well as ISA devices without all the hackery in ide_pci.c to make PCI devices look like ISA counterparts. It doesn't have the excessive wait problem on probe, in fact you shouldn't notice any delay when your devices are getting probed. Probing and attaching of devices are postponed until interrupts are enabled (well almost, not finished yet for disks), making things alot cleaner. Improved performance, although DMA support is still WIP and not in this pre alpha release, worldstone is faster with the new driver compared to the old even with DMA. So what does it take away: There is NO support for old MFM/RLL/ESDI disks. There is NO support for bad144, if your disk is bad, ditch it, it has already outgrown its internal spare sectors, and is dying. For you to try this out, you will have to modify your kernel config file to use the "ata" controller instead of all wdc? entries. example: # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes #You should add the following on ISA systems: controller ata1 at isa? port "IO_WD1" bio irq 14 controller ata2 at isa? port "IO_WD2" bio irq 15 You can leave it all in there, the system knows how to manage. For now this driver reuses the device entries from the old system (that will probably change later), but remember that disks are now numbered in the sequence they are found (like the SCSI system) not as absolute positions as the old system. Although I have tested this on all the systems I can get my hands on, there might very well be gremlins in there, so use AT YOU OWN RISK!! This is still WIP, so there are lots of rough edges and unfinished things in there, and what I have in my lab might look very different from whats in CVS at any given time. So please have all eventual changes go through me, or chances are they just dissapears... I would very much like to hear from you, both good and bad news are very welcome. Enjoy!! -Søren
1999-03-01 21:19:19 +00:00
{
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
struct ad_softc *adp = atadev->softc;
struct bio *bp;
struct ata_request *request;
Finally!! The much roumored replacement for our current IDE/ATA/ATAPI is materialising in the CVS repositories around the globe. So what does this bring us: A new reengineered ATA/ATAPI subsystem, that tries to overcome most of the deficiencies with the current drivers. It supports PCI as well as ISA devices without all the hackery in ide_pci.c to make PCI devices look like ISA counterparts. It doesn't have the excessive wait problem on probe, in fact you shouldn't notice any delay when your devices are getting probed. Probing and attaching of devices are postponed until interrupts are enabled (well almost, not finished yet for disks), making things alot cleaner. Improved performance, although DMA support is still WIP and not in this pre alpha release, worldstone is faster with the new driver compared to the old even with DMA. So what does it take away: There is NO support for old MFM/RLL/ESDI disks. There is NO support for bad144, if your disk is bad, ditch it, it has already outgrown its internal spare sectors, and is dying. For you to try this out, you will have to modify your kernel config file to use the "ata" controller instead of all wdc? entries. example: # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes #You should add the following on ISA systems: controller ata1 at isa? port "IO_WD1" bio irq 14 controller ata2 at isa? port "IO_WD2" bio irq 15 You can leave it all in there, the system knows how to manage. For now this driver reuses the device entries from the old system (that will probably change later), but remember that disks are now numbered in the sequence they are found (like the SCSI system) not as absolute positions as the old system. Although I have tested this on all the systems I can get my hands on, there might very well be gremlins in there, so use AT YOU OWN RISK!! This is still WIP, so there are lots of rough edges and unfinished things in there, and what I have in my lab might look very different from whats in CVS at any given time. So please have all eventual changes go through me, or chances are they just dissapears... I would very much like to hear from you, both good and bad news are very welcome. Enjoy!! -Søren
1999-03-01 21:19:19 +00:00
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
/* remove request from drive queue */
mtx_lock(&adp->queue_mtx);
bp = bioq_first(&adp->queue);
if (!bp) {
mtx_unlock(&adp->queue_mtx);
Ten'th update to the new ATA/ATAPI driver: It been awhile since the last major update, as a benefit there are some cool things in this one (and new bugs probably :) )... The ATA driver has grown "real" timeout support for all devices. This means that it should be possible to get in contact with (especially) lost ATAPI devices. It also means that the ATA driver is now usable on notebooks as it will DTRT on resume. An experimental hack at utilizing the Promise66's at UDMA66 is in there, but I cant test it. If someone feels like sending me one, give me a ping. The ATAPI DMA enableling scheme has been changed, also better DMA support for the Aladdin chipset has been implemented for ATAPI devices. Note that the Aladdin apparently only can do DMA reads on ATAPI devices, and the Promise cant do ATAPI DMA at all. I have seen problems on some ATAPI devices that should be able to run in DMA mode, so if you encounter problems with hanging atapi devices during the probe, or during access, disable DMA in atapi-all.c, and let me know. It might be nessesary to do this via a "white list" for known good devices... The ATAPI CDROM driver can now use eject/close without hanging and the bug that caused reading beyond the end of a CD has been fixed. Media change is also handled proberly. DVD drives are identified and are usable as CDROM devices at least, I dont have the HW to test this further, see above :). The ATAPI tape driver has gotten some support for using the DSC method for not blocking the IDE channel during read/write when the device has full buffers. It knows about the OnStream DI-30 device, support is not completed yet, but it can function as a primitive backup medium, without filemarks, and without bad media handeling. This is because the OnStream device doesn't handle this (like everybody else) in HW. It also now supports getting/setting the record position on devices that supports it. Some rather major cleanups and rearrangements as well (cvs -b diff is your freind). I'm closing in on declaring this for beta code, most of the infrastruture is in place by now. As usual USE AT YOUR OWN RISK!!, this is still alpha level code. This driver can hose your disk real bad if anything goes wrong, but now you have been warned :) But please tell me how it works for you! Enjoy! -Søren
1999-09-21 19:50:40 +00:00
return;
Add support for tagged queuing on ATA drives. There is only support for IBM's DPTA and DTLA series of drives (no other disk vendors are known to support this) on non-Promise controllers (promise controllers lockup when given the tagged queuing specific commands). It gives especially master/slave comboes about 5% better performance. Add support for the Promise ATA100 OEM chip (pdc20265) Add support for the Cyrix 5530 Change the way status is read from the drives, use the alternate status reg when possible. Better support for DEVFS, the acdXtY devices are now created when needed. Lots of little cleanups.
2000-09-19 11:08:39 +00:00
}
Biofinish the request if we cannot malloc in ad_start.
2003-03-27 10:48:21 +00:00
bioq_remove(&adp->queue, bp);
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
mtx_unlock(&adp->queue_mtx);
Biofinish the request if we cannot malloc in ad_start.
2003-03-27 10:48:21 +00:00
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
if (!(request = ata_alloc_request())) {
ata_prtdev(atadev, "FAILURE - out of memory in start\n");
Biofinish the request if we cannot malloc in ad_start.
2003-03-27 10:48:21 +00:00
biofinish(bp, NULL, ENOMEM);
Finally!! The much roumored replacement for our current IDE/ATA/ATAPI is materialising in the CVS repositories around the globe. So what does this bring us: A new reengineered ATA/ATAPI subsystem, that tries to overcome most of the deficiencies with the current drivers. It supports PCI as well as ISA devices without all the hackery in ide_pci.c to make PCI devices look like ISA counterparts. It doesn't have the excessive wait problem on probe, in fact you shouldn't notice any delay when your devices are getting probed. Probing and attaching of devices are postponed until interrupts are enabled (well almost, not finished yet for disks), making things alot cleaner. Improved performance, although DMA support is still WIP and not in this pre alpha release, worldstone is faster with the new driver compared to the old even with DMA. So what does it take away: There is NO support for old MFM/RLL/ESDI disks. There is NO support for bad144, if your disk is bad, ditch it, it has already outgrown its internal spare sectors, and is dying. For you to try this out, you will have to modify your kernel config file to use the "ata" controller instead of all wdc? entries. example: # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes #You should add the following on ISA systems: controller ata1 at isa? port "IO_WD1" bio irq 14 controller ata2 at isa? port "IO_WD2" bio irq 15 You can leave it all in there, the system knows how to manage. For now this driver reuses the device entries from the old system (that will probably change later), but remember that disks are now numbered in the sequence they are found (like the SCSI system) not as absolute positions as the old system. Although I have tested this on all the systems I can get my hands on, there might very well be gremlins in there, so use AT YOU OWN RISK!! This is still WIP, so there are lots of rough edges and unfinished things in there, and what I have in my lab might look very different from whats in CVS at any given time. So please have all eventual changes go through me, or chances are they just dissapears... I would very much like to hear from you, both good and bad news are very welcome. Enjoy!! -Søren
1999-03-01 21:19:19 +00:00
return;
ZIP drives should now be working, I'm not sure about LS120 drives, reports on those most welcome! Fixed problems: Hang on probe on "fantom" devices. The probe now use a timeout to avoid hangs if no interrupt is recevied. There has also been more general code clenaups, and some reorgs.
1999-03-07 21:49:14 +00:00
}
Nine'th update to the new ATA/ATAPI driver: The atapi subsystem has gotten better error handeling and timeouts, it also tries a REQUEST SENSE command when devices returns errors, to give a little more info as to what went wrong. It might be a little verbose for now, but I'm interested in as much feedback on errors as possible, especially timeouts, as I'm a bit in doubt if I've chosen resonable default values everywhere. The disk driver has been changed a bit to prepare for tagged queing, which is next on my list. The disk driver has grown a dump routine, I got one implementation from Darrell Anderson <anderson@cs.duke.edu> which also did partial dumps (usefull on big memory machines) I left out the partial stuff for now, and changed the rest alot to fit into the new ad_request framework. Some minor cleanups and rearrangements as well. As usual USE AT YOUR OWN RISK!!, this is still pre alpha level code. Especially the DMA support can hose your disk real bad if anything goes wrong, again you have been warned :) Notebook owners should be carefull that their machines dont suspend as this might cause trouble... But please tell me how it works for you! Enjoy! -Søren
1999-06-25 09:03:07 +00:00
/* setup request */
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
request->device = atadev;
Use the biotask functionality in GEOM to put finished requests on instead of taskqueue_swi. This shaves from 1 to 10% of the overhead. Overhaul the locking once more, there was a few possible races that are now closed.
2004-01-28 20:38:51 +00:00
request->bio = bp;
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
request->callback = ad_done;
Overhaul of the timeout/reinit framework. This should clear up most of the leftovers from the old version that really doesn't work anymore. Add a reset function for host-end of the ATA channel. This is needed for the SiI3112 in order to whack it back to reality if a device locks up the SATA interface (thereby preventing that we can reset the device). The result is that ATA now recovers from the timeouts that happens with the SiI3112A and more or less all disks based on old PATA electronics with a Marvell PATA->SATA converter. This includes lots of the popular SATA dongles and the WDC Raptor disks..
2004-01-11 22:08:34 +00:00
request->timeout = 5;
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
request->retries = 2;
Complete the bio/buf divorce for all code below devfs::strategy Exceptions: Vinum untouched. This means that it cannot be compiled. Greg Lehey is on the case. CCD not converted yet, casts to struct buf (still safe) atapi-cd casts to struct buf to examine B_PHYS
2000-04-15 05:54:02 +00:00
request->data = bp->bio_data;
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
request->bytecount = bp->bio_bcount;
Add sysctl oid hw.atamodes to set the transfermodes online.
2000-01-27 19:00:51 +00:00
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
/* convert LBA contents if this is an old non-LBA device */
if (atadev->flags & ATA_D_USE_CHS) {
Use the saved params for LBA-CHS conversion. Fixes PC98 bug.
2004-01-08 19:17:16 +00:00
int sector = (bp->bio_pblkno % adp->sectors) + 1;
int cylinder = bp->bio_pblkno / (adp->sectors * adp->heads);
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
int head = (bp->bio_pblkno %
Use the saved params for LBA-CHS conversion. Fixes PC98 bug.
2004-01-08 19:17:16 +00:00
(adp->sectors * adp->heads)) / adp->sectors;
Finally!! The much roumored replacement for our current IDE/ATA/ATAPI is materialising in the CVS repositories around the globe. So what does this bring us: A new reengineered ATA/ATAPI subsystem, that tries to overcome most of the deficiencies with the current drivers. It supports PCI as well as ISA devices without all the hackery in ide_pci.c to make PCI devices look like ISA counterparts. It doesn't have the excessive wait problem on probe, in fact you shouldn't notice any delay when your devices are getting probed. Probing and attaching of devices are postponed until interrupts are enabled (well almost, not finished yet for disks), making things alot cleaner. Improved performance, although DMA support is still WIP and not in this pre alpha release, worldstone is faster with the new driver compared to the old even with DMA. So what does it take away: There is NO support for old MFM/RLL/ESDI disks. There is NO support for bad144, if your disk is bad, ditch it, it has already outgrown its internal spare sectors, and is dying. For you to try this out, you will have to modify your kernel config file to use the "ata" controller instead of all wdc? entries. example: # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes #You should add the following on ISA systems: controller ata1 at isa? port "IO_WD1" bio irq 14 controller ata2 at isa? port "IO_WD2" bio irq 15 You can leave it all in there, the system knows how to manage. For now this driver reuses the device entries from the old system (that will probably change later), but remember that disks are now numbered in the sequence they are found (like the SCSI system) not as absolute positions as the old system. Although I have tested this on all the systems I can get my hands on, there might very well be gremlins in there, so use AT YOU OWN RISK!! This is still WIP, so there are lots of rough edges and unfinished things in there, and what I have in my lab might look very different from whats in CVS at any given time. So please have all eventual changes go through me, or chances are they just dissapears... I would very much like to hear from you, both good and bad news are very welcome. Enjoy!! -Søren
1999-03-01 21:19:19 +00:00
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
request->u.ata.lba =
(sector & 0xff) | (cylinder & 0xffff) << 8 | (head & 0xf) << 24;
Fix a nasty bug in ata_intr, parens are a good thing if used right. Make the error recovery code a little more obvious. Inform the user if UDMA66 mode couldn't be selected due to a non ATA66 compliant 80pin cable. Minor cosmetics.
2000-05-23 19:05:56 +00:00
}
Add support for the Intel 810 chipset (ICH type of chips) Prober support for the VIA 82C686, I finally got the right datasheet. Get rid of atapi_wait, merge it into ata_wait. Avoid a couple of races by using asleep instead of tsleep. Always use 16bit transfers on ISA systems. Clear up the atapi_read/write functions.
2000-01-17 02:04:19 +00:00
else
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
request->u.ata.lba = bp->bio_pblkno;
Add support for tagged queuing on ATA drives. There is only support for IBM's DPTA and DTLA series of drives (no other disk vendors are known to support this) on non-Promise controllers (promise controllers lockup when given the tagged queuing specific commands). It gives especially master/slave comboes about 5% better performance. Add support for the Promise ATA100 OEM chip (pdc20265) Add support for the Cyrix 5530 Change the way status is read from the drives, use the alternate status reg when possible. Better support for DEVFS, the acdXtY devices are now created when needed. Lots of little cleanups.
2000-09-19 11:08:39 +00:00
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
request->u.ata.count = request->bytecount / DEV_BSIZE;
request->transfersize = min(bp->bio_bcount, adp->max_iosize);
Add support for tagged queuing on ATA drives. There is only support for IBM's DPTA and DTLA series of drives (no other disk vendors are known to support this) on non-Promise controllers (promise controllers lockup when given the tagged queuing specific commands). It gives especially master/slave comboes about 5% better performance. Add support for the Promise ATA100 OEM chip (pdc20265) Add support for the Cyrix 5530 Change the way status is read from the drives, use the alternate status reg when possible. Better support for DEVFS, the acdXtY devices are now created when needed. Lots of little cleanups.
2000-09-19 11:08:39 +00:00
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
switch (bp->bio_cmd) {
case BIO_READ:
request->flags |= ATA_R_READ;
if (atadev->mode >= ATA_DMA) {
request->u.ata.command = ATA_READ_DMA;
request->flags |= ATA_R_DMA;
Add support for tagged queuing on ATA drives. There is only support for IBM's DPTA and DTLA series of drives (no other disk vendors are known to support this) on non-Promise controllers (promise controllers lockup when given the tagged queuing specific commands). It gives especially master/slave comboes about 5% better performance. Add support for the Promise ATA100 OEM chip (pdc20265) Add support for the Cyrix 5530 Change the way status is read from the drives, use the alternate status reg when possible. Better support for DEVFS, the acdXtY devices are now created when needed. Lots of little cleanups.
2000-09-19 11:08:39 +00:00
}
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
else if (adp->max_iosize > DEV_BSIZE)
request->u.ata.command = ATA_READ_MUL;
else
request->u.ata.command = ATA_READ;
break;
case BIO_WRITE:
request->flags |= ATA_R_WRITE;
if (atadev->mode >= ATA_DMA) {
request->u.ata.command = ATA_WRITE_DMA;
request->flags |= ATA_R_DMA;
Add support for tagged queuing on ATA drives. There is only support for IBM's DPTA and DTLA series of drives (no other disk vendors are known to support this) on non-Promise controllers (promise controllers lockup when given the tagged queuing specific commands). It gives especially master/slave comboes about 5% better performance. Add support for the Promise ATA100 OEM chip (pdc20265) Add support for the Cyrix 5530 Change the way status is read from the drives, use the alternate status reg when possible. Better support for DEVFS, the acdXtY devices are now created when needed. Lots of little cleanups.
2000-09-19 11:08:39 +00:00
}
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
else if (adp->max_iosize > DEV_BSIZE)
request->u.ata.command = ATA_WRITE_MUL;
else
request->u.ata.command = ATA_WRITE;
break;
default:
ata_prtdev(atadev, "FAILURE - unknown BIO operation\n");
ata_free_request(request);
biofinish(bp, NULL, EIO);
return;
Add support for tagged queuing on ATA drives. There is only support for IBM's DPTA and DTLA series of drives (no other disk vendors are known to support this) on non-Promise controllers (promise controllers lockup when given the tagged queuing specific commands). It gives especially master/slave comboes about 5% better performance. Add support for the Promise ATA100 OEM chip (pdc20265) Add support for the Cyrix 5530 Change the way status is read from the drives, use the alternate status reg when possible. Better support for DEVFS, the acdXtY devices are now created when needed. Lots of little cleanups.
2000-09-19 11:08:39 +00:00
}
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
ata_queue_request(request);
Finally!! The much roumored replacement for our current IDE/ATA/ATAPI is materialising in the CVS repositories around the globe. So what does this bring us: A new reengineered ATA/ATAPI subsystem, that tries to overcome most of the deficiencies with the current drivers. It supports PCI as well as ISA devices without all the hackery in ide_pci.c to make PCI devices look like ISA counterparts. It doesn't have the excessive wait problem on probe, in fact you shouldn't notice any delay when your devices are getting probed. Probing and attaching of devices are postponed until interrupts are enabled (well almost, not finished yet for disks), making things alot cleaner. Improved performance, although DMA support is still WIP and not in this pre alpha release, worldstone is faster with the new driver compared to the old even with DMA. So what does it take away: There is NO support for old MFM/RLL/ESDI disks. There is NO support for bad144, if your disk is bad, ditch it, it has already outgrown its internal spare sectors, and is dying. For you to try this out, you will have to modify your kernel config file to use the "ata" controller instead of all wdc? entries. example: # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes #You should add the following on ISA systems: controller ata1 at isa? port "IO_WD1" bio irq 14 controller ata2 at isa? port "IO_WD2" bio irq 15 You can leave it all in there, the system knows how to manage. For now this driver reuses the device entries from the old system (that will probably change later), but remember that disks are now numbered in the sequence they are found (like the SCSI system) not as absolute positions as the old system. Although I have tested this on all the systems I can get my hands on, there might very well be gremlins in there, so use AT YOU OWN RISK!! This is still WIP, so there are lots of rough edges and unfinished things in there, and what I have in my lab might look very different from whats in CVS at any given time. So please have all eventual changes go through me, or chances are they just dissapears... I would very much like to hear from you, both good and bad news are very welcome. Enjoy!! -Søren
1999-03-01 21:19:19 +00:00
}
Add support for tagged queuing on ATA drives. There is only support for IBM's DPTA and DTLA series of drives (no other disk vendors are known to support this) on non-Promise controllers (promise controllers lockup when given the tagged queuing specific commands). It gives especially master/slave comboes about 5% better performance. Add support for the Promise ATA100 OEM chip (pdc20265) Add support for the Cyrix 5530 Change the way status is read from the drives, use the alternate status reg when possible. Better support for DEVFS, the acdXtY devices are now created when needed. Lots of little cleanups.
2000-09-19 11:08:39 +00:00
static void
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
ad_done(struct ata_request *request)
Add support for the HPT366 chip, this is used on the Abit boards and their HotRod controller and on SIIG PCI ultra DMA controller. These changes also made lots of the Promise code go away, its all much more generic this way. Get rid of atapi_immed_cmd, instead use the queue to move atapi commands from interrupt context if nessesary, the entire atapi layer has gotten an overhaul. Lots of fixes to utililize the new features in subr_disk.c etc, and get rid of the last biots of softc arrays in the drivers, the only one left is atadevices which cannot easily go away (yet). Use our own malloc names, its a lot easier to track memory usage this way. General cleanup overall.
1999-10-09 19:57:13 +00:00
{
Use the biotask functionality in GEOM to put finished requests on instead of taskqueue_swi. This shaves from 1 to 10% of the overhead. Overhaul the locking once more, there was a few possible races that are now closed.
2004-01-28 20:38:51 +00:00
struct bio *bp = request->bio;
Add support for tagged queuing on ATA drives. There is only support for IBM's DPTA and DTLA series of drives (no other disk vendors are known to support this) on non-Promise controllers (promise controllers lockup when given the tagged queuing specific commands). It gives especially master/slave comboes about 5% better performance. Add support for the Promise ATA100 OEM chip (pdc20265) Add support for the Cyrix 5530 Change the way status is read from the drives, use the alternate status reg when possible. Better support for DEVFS, the acdXtY devices are now created when needed. Lots of little cleanups.
2000-09-19 11:08:39 +00:00
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
/* finish up transfer */
if ((bp->bio_error = request->result))
bp->bio_flags |= BIO_ERROR;
bp->bio_resid = bp->bio_bcount - request->donecount;
biodone(bp);
ata_free_request(request);
Add support for tagged queuing on ATA drives. There is only support for IBM's DPTA and DTLA series of drives (no other disk vendors are known to support this) on non-Promise controllers (promise controllers lockup when given the tagged queuing specific commands). It gives especially master/slave comboes about 5% better performance. Add support for the Promise ATA100 OEM chip (pdc20265) Add support for the Cyrix 5530 Change the way status is read from the drives, use the alternate status reg when possible. Better support for DEVFS, the acdXtY devices are now created when needed. Lots of little cleanups.
2000-09-19 11:08:39 +00:00
}
static int
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
addump(void *arg, void *virtual, vm_offset_t physical,
off_t offset, size_t length)
Add support for tagged queuing on ATA drives. There is only support for IBM's DPTA and DTLA series of drives (no other disk vendors are known to support this) on non-Promise controllers (promise controllers lockup when given the tagged queuing specific commands). It gives especially master/slave comboes about 5% better performance. Add support for the Promise ATA100 OEM chip (pdc20265) Add support for the Cyrix 5530 Change the way status is read from the drives, use the alternate status reg when possible. Better support for DEVFS, the acdXtY devices are now created when needed. Lots of little cleanups.
2000-09-19 11:08:39 +00:00
{
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
struct ata_request request;
struct disk *dp = arg;
struct ad_softc *adp = dp->d_drv1;
Update the tags handling a bit, which makes support for the older IBM DTTA series of drives possible. Update error handling a bit now we are here.
2002-07-22 18:35:01 +00:00
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
if (!adp)
return ENXIO;
Update the tags handling a bit, which makes support for the older IBM DTTA series of drives possible. Update error handling a bit now we are here.
2002-07-22 18:35:01 +00:00
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
bzero(&request, sizeof(struct ata_request));
Fix ad_dump top actually produce a dump. Reported by: Tor Egge <Tor.Egge@cvsup.no.freebsd.org>
2003-08-24 19:50:22 +00:00
request.device = adp->device;
Update the tags handling a bit, which makes support for the older IBM DTTA series of drives possible. Update error handling a bit now we are here.
2002-07-22 18:35:01 +00:00
Update the dump code to flush buffers at the end of the dump to avoid loosing evt cached data.
2003-11-11 07:49:45 +00:00
if (length) {
request.data = virtual;
request.bytecount = length;
request.transfersize = min(length, adp->max_iosize);
request.flags = ATA_R_WRITE;
if (adp->max_iosize > DEV_BSIZE)
request.u.ata.command = ATA_WRITE_MUL;
else
request.u.ata.command = ATA_WRITE;
request.u.ata.lba = offset / DEV_BSIZE;
request.u.ata.count = request.bytecount / DEV_BSIZE;
}
else {
request.u.ata.command = ATA_FLUSHCACHE;
request.flags = ATA_R_CONTROL;
}
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
Update the dump code to flush buffers at the end of the dump to avoid loosing evt cached data.
2003-11-11 07:49:45 +00:00
if (request.device->channel->hw.transaction(&request) == ATA_OP_CONTINUES) {
while (request.device->channel->running == &request &&
!(request.status & ATA_S_ERROR)) {
DELAY(20);
request.device->channel->running = &request;
request.device->channel->hw.interrupt(request.device->channel);
}
Add support for tagged queuing on ATA drives. There is only support for IBM's DPTA and DTLA series of drives (no other disk vendors are known to support this) on non-Promise controllers (promise controllers lockup when given the tagged queuing specific commands). It gives especially master/slave comboes about 5% better performance. Add support for the Promise ATA100 OEM chip (pdc20265) Add support for the Cyrix 5530 Change the way status is read from the drives, use the alternate status reg when possible. Better support for DEVFS, the acdXtY devices are now created when needed. Lots of little cleanups.
2000-09-19 11:08:39 +00:00
}
Update the dump code to flush buffers at the end of the dump to avoid loosing evt cached data.
2003-11-11 07:49:45 +00:00
if (request.status & ATA_S_ERROR)
return EIO;
Add support for tagged queuing on ATA drives. There is only support for IBM's DPTA and DTLA series of drives (no other disk vendors are known to support this) on non-Promise controllers (promise controllers lockup when given the tagged queuing specific commands). It gives especially master/slave comboes about 5% better performance. Add support for the Promise ATA100 OEM chip (pdc20265) Add support for the Cyrix 5530 Change the way status is read from the drives, use the alternate status reg when possible. Better support for DEVFS, the acdXtY devices are now created when needed. Lots of little cleanups.
2000-09-19 11:08:39 +00:00
return 0;
Add support for the HPT366 chip, this is used on the Abit boards and their HotRod controller and on SIIG PCI ultra DMA controller. These changes also made lots of the Promise code go away, its all much more generic this way. Get rid of atapi_immed_cmd, instead use the queue to move atapi commands from interrupt context if nessesary, the entire atapi layer has gotten an overhaul. Lots of fixes to utililize the new features in subr_disk.c etc, and get rid of the last biots of softc arrays in the drivers, the only one left is atadevices which cannot easily go away (yet). Use our own malloc names, its a lot easier to track memory usage this way. General cleanup overall.
1999-10-09 19:57:13 +00:00
}
Add sysctls for reading the tunables as suggested by des. Minor cleanups plus checks of the ->active state. Cosmetics.
2001-03-19 08:04:54 +00:00
void
Major update of the ATA RAID code, part 3: Add code to properly detach/attach disks that are part of a RAID. Mark a disk that is attached on an ATA channel belonging to a RAID as a spare disk that can be used for rebuilding failed RAID1's. Add support for rebuilding failed RAID1's. Several fixes to the detach/attach code. For replacing a disk in a failed RAID1 do the following: Find the controller channel# of the failed disk. Exec 'atacontrol detach <channel#>' to free the disk from the system. Replace the failed disk with a new one of at least the same size. If your have your disks in drawers/enclosures this can be done with the system still running. Exec 'atacontrol attach <channel#>' to add the disk to the system and mark it as a valid spare for rebuild. Exec 'atacontrol rebuild <array#>' The system will rebuild the array on the fly, the array can still be used during this, although with slower performance. Please let me know of any problems with this! Sponsored by: Advanis Inc. MFC after: 2 weeks
2002-03-03 15:36:21 +00:00
ad_print(struct ad_softc *adp)
Add sysctls for reading the tunables as suggested by des. Minor cleanups plus checks of the ->active state. Cosmetics.
2001-03-19 08:04:54 +00:00
{
if (bootverbose) {
Major update of the ATA RAID code, part 1: Overhaul of the attach/detach code and structures, there were some nasty bugs in the old implementation. This made it possible to collapse the ATA/ATAPI device control structures into one generic structure. A note here, the kernel is NOT ready for detach of active devices, it fails all over in random places, but for inactive devices it works. However for ATA RAID this works, since the RAID abstration layer insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the physical disks. Proberly detect the RAID's from the BIOS, and mark critical RAID1 arrays as such, but continue if there is enough of the mirror left to do so. Properly fail arrays on a live system. For RAID0 that means return EIO, and for RAID1 it means continue on the still working part of the mirror if possible, else return EIO. If the state changes, log this to the console. Allow for Promise & Highpoint controllers/arrays to coexist on the same machine. It is not possible to distribute arrays over different makes of controllers though. If Promise SuperSwap enclosures are used, signal disk state on the status LED on the front. Misc fixes that I had lying around for various minor bugs. Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
ata_prtdev(adp->device, "<%.40s/%.8s> ATA-%d disk at ata%d-%s\n",
adp->device->param->model, adp->device->param->revision,
ad_version(adp->device->param->version_major),
device_get_unit(adp->device->channel->dev),
(adp->device->unit == ATA_MASTER) ? "master" : "slave");
Add sysctls for reading the tunables as suggested by des. Minor cleanups plus checks of the ->active state. Cosmetics.
2001-03-19 08:04:54 +00:00
Major update of the ATA RAID code, part 1: Overhaul of the attach/detach code and structures, there were some nasty bugs in the old implementation. This made it possible to collapse the ATA/ATAPI device control structures into one generic structure. A note here, the kernel is NOT ready for detach of active devices, it fails all over in random places, but for inactive devices it works. However for ATA RAID this works, since the RAID abstration layer insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the physical disks. Proberly detect the RAID's from the BIOS, and mark critical RAID1 arrays as such, but continue if there is enough of the mirror left to do so. Properly fail arrays on a live system. For RAID0 that means return EIO, and for RAID1 it means continue on the still working part of the mirror if possible, else return EIO. If the state changes, log this to the console. Allow for Promise & Highpoint controllers/arrays to coexist on the same machine. It is not possible to distribute arrays over different makes of controllers though. If Promise SuperSwap enclosures are used, signal disk state on the status LED on the front. Misc fixes that I had lying around for various minor bugs. Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
ata_prtdev(adp->device,
Update with latest ATA/ATAPI ver 6 rev 2 items.
2001-10-06 11:07:04 +00:00
"%lluMB (%llu sectors), %llu C, %u H, %u S, %u B\n",
Fix it so that it doesn't complain for compiles on alpha- that is, match format string args to actual args.
2001-10-14 19:44:15 +00:00
(unsigned long long)(adp->total_secs /
Update the tags handling a bit, which makes support for the older IBM DTTA series of drives possible. Update error handling a bit now we are here.
2002-07-22 18:35:01 +00:00
((1024L*1024L)/DEV_BSIZE)),
(unsigned long long)adp->total_secs,
(unsigned long long)(adp->total_secs /
(adp->heads * adp->sectors)),
Add sysctls for reading the tunables as suggested by des. Minor cleanups plus checks of the ->active state. Cosmetics.
2001-03-19 08:04:54 +00:00
adp->heads, adp->sectors, DEV_BSIZE);
Major update of the ATA RAID code, part 1: Overhaul of the attach/detach code and structures, there were some nasty bugs in the old implementation. This made it possible to collapse the ATA/ATAPI device control structures into one generic structure. A note here, the kernel is NOT ready for detach of active devices, it fails all over in random places, but for inactive devices it works. However for ATA RAID this works, since the RAID abstration layer insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the physical disks. Proberly detect the RAID's from the BIOS, and mark critical RAID1 arrays as such, but continue if there is enough of the mirror left to do so. Properly fail arrays on a live system. For RAID0 that means return EIO, and for RAID1 it means continue on the still working part of the mirror if possible, else return EIO. If the state changes, log this to the console. Allow for Promise & Highpoint controllers/arrays to coexist on the same machine. It is not possible to distribute arrays over different makes of controllers though. If Promise SuperSwap enclosures are used, signal disk state on the status LED on the front. Misc fixes that I had lying around for various minor bugs. Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
ata_prtdev(adp->device, "%d secs/int, %d depth queue, %s%s\n",
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
adp->max_iosize / DEV_BSIZE, adp->num_tags + 1,
Add sysctls for reading the tunables as suggested by des. Minor cleanups plus checks of the ->active state. Cosmetics.
2001-03-19 08:04:54 +00:00
(adp->flags & AD_F_TAG_ENABLED) ? "tagged " : "",
Major update of the ATA RAID code, part 1: Overhaul of the attach/detach code and structures, there were some nasty bugs in the old implementation. This made it possible to collapse the ATA/ATAPI device control structures into one generic structure. A note here, the kernel is NOT ready for detach of active devices, it fails all over in random places, but for inactive devices it works. However for ATA RAID this works, since the RAID abstration layer insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the physical disks. Proberly detect the RAID's from the BIOS, and mark critical RAID1 arrays as such, but continue if there is enough of the mirror left to do so. Properly fail arrays on a live system. For RAID0 that means return EIO, and for RAID1 it means continue on the still working part of the mirror if possible, else return EIO. If the state changes, log this to the console. Allow for Promise & Highpoint controllers/arrays to coexist on the same machine. It is not possible to distribute arrays over different makes of controllers though. If Promise SuperSwap enclosures are used, signal disk state on the status LED on the front. Misc fixes that I had lying around for various minor bugs. Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
ata_mode2str(adp->device->mode));
Add sysctls for reading the tunables as suggested by des. Minor cleanups plus checks of the ->active state. Cosmetics.
2001-03-19 08:04:54 +00:00
}
Add support for the Promise command sequencer present on all modern Promise controllers (PDC203** PDC206**). This also adds preliminary support for the Promise SX4/SX4000 but *only* as a "normal" Promise ATA controller (ATA RAID's are supported though but only RAID0, RAID1 and RAID0+1). This cuts off yet another 5-8% of the command overhead on promise controllers, making them the fastest we have ever had support for. Work is now continuing to add support for this in ATA RAID, to accellerate ATA RAID quite a bit on these controllers, and especially the SX4/SX4000 series as they have quite a few tricks in there.. This commit also adds a few fixes to the SATA code needed for proper support.
2004-04-13 09:44:20 +00:00
else {
ata_prtdev(adp->device,"%lluMB <%.40s> [%lld/%d/%d] at ata%d-%s %s",
Fix it so that it doesn't complain for compiles on alpha- that is, match format string args to actual args.
2001-10-14 19:44:15 +00:00
(unsigned long long)(adp->total_secs /
Update the tags handling a bit, which makes support for the older IBM DTTA series of drives possible. Update error handling a bit now we are here.
2002-07-22 18:35:01 +00:00
((1024L * 1024L) / DEV_BSIZE)),
Major update of the ATA RAID code, part 1: Overhaul of the attach/detach code and structures, there were some nasty bugs in the old implementation. This made it possible to collapse the ATA/ATAPI device control structures into one generic structure. A note here, the kernel is NOT ready for detach of active devices, it fails all over in random places, but for inactive devices it works. However for ATA RAID this works, since the RAID abstration layer insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the physical disks. Proberly detect the RAID's from the BIOS, and mark critical RAID1 arrays as such, but continue if there is enough of the mirror left to do so. Properly fail arrays on a live system. For RAID0 that means return EIO, and for RAID1 it means continue on the still working part of the mirror if possible, else return EIO. If the state changes, log this to the console. Allow for Promise & Highpoint controllers/arrays to coexist on the same machine. It is not possible to distribute arrays over different makes of controllers though. If Promise SuperSwap enclosures are used, signal disk state on the status LED on the front. Misc fixes that I had lying around for various minor bugs. Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
adp->device->param->model,
Fix it so that it doesn't complain for compiles on alpha- that is, match format string args to actual args.
2001-10-14 19:44:15 +00:00
(unsigned long long)(adp->total_secs /
Update the tags handling a bit, which makes support for the older IBM DTTA series of drives possible. Update error handling a bit now we are here.
2002-07-22 18:35:01 +00:00
(adp->heads * adp->sectors)),
Add sysctls for reading the tunables as suggested by des. Minor cleanups plus checks of the ->active state. Cosmetics.
2001-03-19 08:04:54 +00:00
adp->heads, adp->sectors,
Major update of the ATA RAID code, part 1: Overhaul of the attach/detach code and structures, there were some nasty bugs in the old implementation. This made it possible to collapse the ATA/ATAPI device control structures into one generic structure. A note here, the kernel is NOT ready for detach of active devices, it fails all over in random places, but for inactive devices it works. However for ATA RAID this works, since the RAID abstration layer insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the physical disks. Proberly detect the RAID's from the BIOS, and mark critical RAID1 arrays as such, but continue if there is enough of the mirror left to do so. Properly fail arrays on a live system. For RAID0 that means return EIO, and for RAID1 it means continue on the still working part of the mirror if possible, else return EIO. If the state changes, log this to the console. Allow for Promise & Highpoint controllers/arrays to coexist on the same machine. It is not possible to distribute arrays over different makes of controllers though. If Promise SuperSwap enclosures are used, signal disk state on the status LED on the front. Misc fixes that I had lying around for various minor bugs. Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
device_get_unit(adp->device->channel->dev),
(adp->device->unit == ATA_MASTER) ? "master" : "slave",
Add support for the Promise command sequencer present on all modern Promise controllers (PDC203** PDC206**). This also adds preliminary support for the Promise SX4/SX4000 but *only* as a "normal" Promise ATA controller (ATA RAID's are supported though but only RAID0, RAID1 and RAID0+1). This cuts off yet another 5-8% of the command overhead on promise controllers, making them the fastest we have ever had support for. Work is now continuing to add support for this in ATA RAID, to accellerate ATA RAID quite a bit on these controllers, and especially the SX4/SX4000 series as they have quite a few tricks in there.. This commit also adds a few fixes to the SATA code needed for proper support.
2004-04-13 09:44:20 +00:00
(adp->flags & AD_F_TAG_ENABLED) ? "tagged " : "");
if (adp->device->param->satacapabilities != 0x0000 &&
adp->device->param->satacapabilities != 0xffff)
printf("SATA150\n");
else
printf("%s\n", ata_mode2str(adp->device->mode));
}
Add sysctls for reading the tunables as suggested by des. Minor cleanups plus checks of the ->active state. Cosmetics.
2001-03-19 08:04:54 +00:00
}
Add support for tagged queuing on ATA drives. There is only support for IBM's DPTA and DTLA series of drives (no other disk vendors are known to support this) on non-Promise controllers (promise controllers lockup when given the tagged queuing specific commands). It gives especially master/slave comboes about 5% better performance. Add support for the Promise ATA100 OEM chip (pdc20265) Add support for the Cyrix 5530 Change the way status is read from the drives, use the alternate status reg when possible. Better support for DEVFS, the acdXtY devices are now created when needed. Lots of little cleanups.
2000-09-19 11:08:39 +00:00
static int
Finally!! The much roumored replacement for our current IDE/ATA/ATAPI is materialising in the CVS repositories around the globe. So what does this bring us: A new reengineered ATA/ATAPI subsystem, that tries to overcome most of the deficiencies with the current drivers. It supports PCI as well as ISA devices without all the hackery in ide_pci.c to make PCI devices look like ISA counterparts. It doesn't have the excessive wait problem on probe, in fact you shouldn't notice any delay when your devices are getting probed. Probing and attaching of devices are postponed until interrupts are enabled (well almost, not finished yet for disks), making things alot cleaner. Improved performance, although DMA support is still WIP and not in this pre alpha release, worldstone is faster with the new driver compared to the old even with DMA. So what does it take away: There is NO support for old MFM/RLL/ESDI disks. There is NO support for bad144, if your disk is bad, ditch it, it has already outgrown its internal spare sectors, and is dying. For you to try this out, you will have to modify your kernel config file to use the "ata" controller instead of all wdc? entries. example: # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes #You should add the following on ISA systems: controller ata1 at isa? port "IO_WD1" bio irq 14 controller ata2 at isa? port "IO_WD2" bio irq 15 You can leave it all in there, the system knows how to manage. For now this driver reuses the device entries from the old system (that will probably change later), but remember that disks are now numbered in the sequence they are found (like the SCSI system) not as absolute positions as the old system. Although I have tested this on all the systems I can get my hands on, there might very well be gremlins in there, so use AT YOU OWN RISK!! This is still WIP, so there are lots of rough edges and unfinished things in there, and what I have in my lab might look very different from whats in CVS at any given time. So please have all eventual changes go through me, or chances are they just dissapears... I would very much like to hear from you, both good and bad news are very welcome. Enjoy!! -Søren
1999-03-01 21:19:19 +00:00
ad_version(u_int16_t version)
{
Add support for tagged queuing on ATA drives. There is only support for IBM's DPTA and DTLA series of drives (no other disk vendors are known to support this) on non-Promise controllers (promise controllers lockup when given the tagged queuing specific commands). It gives especially master/slave comboes about 5% better performance. Add support for the Promise ATA100 OEM chip (pdc20265) Add support for the Cyrix 5530 Change the way status is read from the drives, use the alternate status reg when possible. Better support for DEVFS, the acdXtY devices are now created when needed. Lots of little cleanups.
2000-09-19 11:08:39 +00:00
int bit;
Finally!! The much roumored replacement for our current IDE/ATA/ATAPI is materialising in the CVS repositories around the globe. So what does this bring us: A new reengineered ATA/ATAPI subsystem, that tries to overcome most of the deficiencies with the current drivers. It supports PCI as well as ISA devices without all the hackery in ide_pci.c to make PCI devices look like ISA counterparts. It doesn't have the excessive wait problem on probe, in fact you shouldn't notice any delay when your devices are getting probed. Probing and attaching of devices are postponed until interrupts are enabled (well almost, not finished yet for disks), making things alot cleaner. Improved performance, although DMA support is still WIP and not in this pre alpha release, worldstone is faster with the new driver compared to the old even with DMA. So what does it take away: There is NO support for old MFM/RLL/ESDI disks. There is NO support for bad144, if your disk is bad, ditch it, it has already outgrown its internal spare sectors, and is dying. For you to try this out, you will have to modify your kernel config file to use the "ata" controller instead of all wdc? entries. example: # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes #You should add the following on ISA systems: controller ata1 at isa? port "IO_WD1" bio irq 14 controller ata2 at isa? port "IO_WD2" bio irq 15 You can leave it all in there, the system knows how to manage. For now this driver reuses the device entries from the old system (that will probably change later), but remember that disks are now numbered in the sequence they are found (like the SCSI system) not as absolute positions as the old system. Although I have tested this on all the systems I can get my hands on, there might very well be gremlins in there, so use AT YOU OWN RISK!! This is still WIP, so there are lots of rough edges and unfinished things in there, and what I have in my lab might look very different from whats in CVS at any given time. So please have all eventual changes go through me, or chances are they just dissapears... I would very much like to hear from you, both good and bad news are very welcome. Enjoy!! -Søren
1999-03-01 21:19:19 +00:00
if (version == 0xffff)
Add DMA support for the SiS 5591 and old PIIX chipsets. Add a missing DELAY(1) in ata_wait. Change the info from ad_version, so the ATA version from the disk can be used to quantify the DAM modes valid for this drive, ie be more selective with turning DMA on on older disks that should not support it.. Fix the probe for BIOS enabled DMA in the generic case, master/slave was reversed in the test. Check the return for ata_command in all cases, and print warnings if it fails. Call ata_dmainit with all dmamodes off when falling back to PIO mode, that should take care of both the Promise & HPT366 controllers not being able to handle the fallback... Cleanup the printf's in the drivers, use the prober device name (if possible) instead of ataN-master/slave.
1999-12-13 10:19:39 +00:00
return 0;
Finally!! The much roumored replacement for our current IDE/ATA/ATAPI is materialising in the CVS repositories around the globe. So what does this bring us: A new reengineered ATA/ATAPI subsystem, that tries to overcome most of the deficiencies with the current drivers. It supports PCI as well as ISA devices without all the hackery in ide_pci.c to make PCI devices look like ISA counterparts. It doesn't have the excessive wait problem on probe, in fact you shouldn't notice any delay when your devices are getting probed. Probing and attaching of devices are postponed until interrupts are enabled (well almost, not finished yet for disks), making things alot cleaner. Improved performance, although DMA support is still WIP and not in this pre alpha release, worldstone is faster with the new driver compared to the old even with DMA. So what does it take away: There is NO support for old MFM/RLL/ESDI disks. There is NO support for bad144, if your disk is bad, ditch it, it has already outgrown its internal spare sectors, and is dying. For you to try this out, you will have to modify your kernel config file to use the "ata" controller instead of all wdc? entries. example: # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes #You should add the following on ISA systems: controller ata1 at isa? port "IO_WD1" bio irq 14 controller ata2 at isa? port "IO_WD2" bio irq 15 You can leave it all in there, the system knows how to manage. For now this driver reuses the device entries from the old system (that will probably change later), but remember that disks are now numbered in the sequence they are found (like the SCSI system) not as absolute positions as the old system. Although I have tested this on all the systems I can get my hands on, there might very well be gremlins in there, so use AT YOU OWN RISK!! This is still WIP, so there are lots of rough edges and unfinished things in there, and what I have in my lab might look very different from whats in CVS at any given time. So please have all eventual changes go through me, or chances are they just dissapears... I would very much like to hear from you, both good and bad news are very welcome. Enjoy!! -Søren
1999-03-01 21:19:19 +00:00
for (bit = 15; bit >= 0; bit--)
if (version & (1<<bit))
Add DMA support for the SiS 5591 and old PIIX chipsets. Add a missing DELAY(1) in ata_wait. Change the info from ad_version, so the ATA version from the disk can be used to quantify the DAM modes valid for this drive, ie be more selective with turning DMA on on older disks that should not support it.. Fix the probe for BIOS enabled DMA in the generic case, master/slave was reversed in the test. Check the return for ata_command in all cases, and print warnings if it fails. Call ata_dmainit with all dmamodes off when falling back to PIO mode, that should take care of both the Promise & HPT366 controllers not being able to handle the fallback... Cleanup the printf's in the drivers, use the prober device name (if possible) instead of ataN-master/slave.
1999-12-13 10:19:39 +00:00
return bit;
return 0;
Finally!! The much roumored replacement for our current IDE/ATA/ATAPI is materialising in the CVS repositories around the globe. So what does this bring us: A new reengineered ATA/ATAPI subsystem, that tries to overcome most of the deficiencies with the current drivers. It supports PCI as well as ISA devices without all the hackery in ide_pci.c to make PCI devices look like ISA counterparts. It doesn't have the excessive wait problem on probe, in fact you shouldn't notice any delay when your devices are getting probed. Probing and attaching of devices are postponed until interrupts are enabled (well almost, not finished yet for disks), making things alot cleaner. Improved performance, although DMA support is still WIP and not in this pre alpha release, worldstone is faster with the new driver compared to the old even with DMA. So what does it take away: There is NO support for old MFM/RLL/ESDI disks. There is NO support for bad144, if your disk is bad, ditch it, it has already outgrown its internal spare sectors, and is dying. For you to try this out, you will have to modify your kernel config file to use the "ata" controller instead of all wdc? entries. example: # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes #You should add the following on ISA systems: controller ata1 at isa? port "IO_WD1" bio irq 14 controller ata2 at isa? port "IO_WD2" bio irq 15 You can leave it all in there, the system knows how to manage. For now this driver reuses the device entries from the old system (that will probably change later), but remember that disks are now numbered in the sequence they are found (like the SCSI system) not as absolute positions as the old system. Although I have tested this on all the systems I can get my hands on, there might very well be gremlins in there, so use AT YOU OWN RISK!! This is still WIP, so there are lots of rough edges and unfinished things in there, and what I have in my lab might look very different from whats in CVS at any given time. So please have all eventual changes go through me, or chances are they just dissapears... I would very much like to hear from you, both good and bad news are very welcome. Enjoy!! -Søren
1999-03-01 21:19:19 +00:00
}
Reference in New Issue Copy Permalink