789 lines
17 KiB
C
Raw Normal View History

Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
/*-
* Copyright (c) 1998 Robert Nordier
* All rights reserved.
*
* Redistribution and use in source and binary forms are freely
* permitted provided that the above copyright notice and this
* paragraph and the following disclaimer are duplicated in all
* such forms.
*
* This software is provided "AS IS" and without any express or
* implied warranties, including, without limitation, the implied
* warranties of merchantability and fitness for a particular
* purpose.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/errno.h>
#include <sys/diskmbr.h>
#ifdef GPT
#include <sys/gpt.h>
#endif
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
#include <sys/reboot.h>
#include <sys/queue.h>
#include <machine/bootinfo.h>
#include <machine/elf.h>
#include <machine/pc/bios.h>
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
#include <stdarg.h>
#include <stddef.h>
#include <a.out.h>
#include <btxv86.h>
#include "lib.h"
- Split code shared by almost any boot loader into separate files and clean up most layering violations: sys/boot/i386/common/rbx.h: RBX_* defines OPT_SET() OPT_CHECK() sys/boot/common/util.[ch]: memcpy() memset() memcmp() bcpy() bzero() bcmp() strcmp() strncmp() [new] strcpy() strcat() strchr() strlen() printf() sys/boot/i386/common/cons.[ch]: ioctrl putc() xputc() putchar() getc() xgetc() keyhit() [now takes number of seconds as an argument] getstr() sys/boot/i386/common/drv.[ch]: struct dsk drvread() drvwrite() [new] drvsize() [new] sys/boot/common/crc32.[ch] [new] sys/boot/common/gpt.[ch] [new] - Teach gptboot and gptzfsboot about new files. I haven't touched the rest, but there is still a lot of code duplication to be removed. - Implement full GPT support. Currently we just read primary header and partition table and don't care about checksums, etc. After this change we verify checksums of primary header and primary partition table and if there is a problem we fall back to backup header and backup partition table. - Clean up most messages to use prefix of boot program, so in case of an error we know where the error comes from, eg.: gptboot: unable to read primary GPT header - If we can't boot, print boot prompt only once and not every five seconds. - Honour newly added GPT attributes: bootme - this is bootable partition bootonce - try to boot from this partition only once bootfailed - we failed to boot from this partition - Change boot order of gptboot to the following: 1. Try to boot from all the partitions that have both 'bootme' and 'bootonce' attributes one by one. 2. Try to boot from all the partitions that have only 'bootme' attribute one by one. 3. If there are no partitions with 'bootme' attribute, boot from the first UFS partition. - The 'bootonce' functionality is implemented in the following way: 1. Walk through all the partitions and when 'bootonce' attribute is found without 'bootme' attribute, remove 'bootonce' attribute and set 'bootfailed' attribute. 'bootonce' attribute alone means that we tried to boot from this partition, but boot failed after leaving gptboot and machine was restarted. 2. Find partition with both 'bootme' and 'bootonce' attributes. 3. Remove 'bootme' attribute. 4. Try to execute /boot/loader or /boot/kernel/kernel from that partition. If succeeded we stop here. 5. If execution failed, remove 'bootonce' and set 'bootfailed'. 6. Go to 2. If whole boot succeeded there is new /etc/rc.d/gptboot script coming that will log all partitions that we failed to boot from (the ones with 'bootfailed' attribute) and will remove this attribute. It will also find partition with 'bootonce' attribute - this is the partition we booted from successfully. The script will log success and remove the attribute. All the GPT updates we do here goes to both primary and backup GPT if they are valid. We don't touch headers or partition tables when checksum doesn't match. Reviewed by: arch (Message-ID: <20100917234542.GE1902@garage.freebsd.pl>) Obtained from: Wheel Systems Sp. z o.o. http://www.wheelsystems.com MFC after: 2 weeks
2010-09-24 19:49:12 +00:00
#include "rbx.h"
#include "drv.h"
#include "util.h"
#include "cons.h"
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
/* Hint to loader that we came from ZFS */
#define KARGS_FLAGS_ZFS 0x4
#define PATH_DOTCONFIG "/boot.config"
#define PATH_CONFIG "/boot/config"
#define PATH_BOOT3 "/boot/zfsloader"
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
#define PATH_KERNEL "/boot/kernel/kernel"
#define ARGS 0x900
#define NOPT 14
#define NDEV 3
#define BIOS_NUMDRIVES 0x475
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
#define DRV_HARD 0x80
#define DRV_MASK 0x7f
#define TYPE_AD 0
#define TYPE_DA 1
#define TYPE_MAXHARD TYPE_DA
#define TYPE_FD 2
- Split code shared by almost any boot loader into separate files and clean up most layering violations: sys/boot/i386/common/rbx.h: RBX_* defines OPT_SET() OPT_CHECK() sys/boot/common/util.[ch]: memcpy() memset() memcmp() bcpy() bzero() bcmp() strcmp() strncmp() [new] strcpy() strcat() strchr() strlen() printf() sys/boot/i386/common/cons.[ch]: ioctrl putc() xputc() putchar() getc() xgetc() keyhit() [now takes number of seconds as an argument] getstr() sys/boot/i386/common/drv.[ch]: struct dsk drvread() drvwrite() [new] drvsize() [new] sys/boot/common/crc32.[ch] [new] sys/boot/common/gpt.[ch] [new] - Teach gptboot and gptzfsboot about new files. I haven't touched the rest, but there is still a lot of code duplication to be removed. - Implement full GPT support. Currently we just read primary header and partition table and don't care about checksums, etc. After this change we verify checksums of primary header and primary partition table and if there is a problem we fall back to backup header and backup partition table. - Clean up most messages to use prefix of boot program, so in case of an error we know where the error comes from, eg.: gptboot: unable to read primary GPT header - If we can't boot, print boot prompt only once and not every five seconds. - Honour newly added GPT attributes: bootme - this is bootable partition bootonce - try to boot from this partition only once bootfailed - we failed to boot from this partition - Change boot order of gptboot to the following: 1. Try to boot from all the partitions that have both 'bootme' and 'bootonce' attributes one by one. 2. Try to boot from all the partitions that have only 'bootme' attribute one by one. 3. If there are no partitions with 'bootme' attribute, boot from the first UFS partition. - The 'bootonce' functionality is implemented in the following way: 1. Walk through all the partitions and when 'bootonce' attribute is found without 'bootme' attribute, remove 'bootonce' attribute and set 'bootfailed' attribute. 'bootonce' attribute alone means that we tried to boot from this partition, but boot failed after leaving gptboot and machine was restarted. 2. Find partition with both 'bootme' and 'bootonce' attributes. 3. Remove 'bootme' attribute. 4. Try to execute /boot/loader or /boot/kernel/kernel from that partition. If succeeded we stop here. 5. If execution failed, remove 'bootonce' and set 'bootfailed'. 6. Go to 2. If whole boot succeeded there is new /etc/rc.d/gptboot script coming that will log all partitions that we failed to boot from (the ones with 'bootfailed' attribute) and will remove this attribute. It will also find partition with 'bootonce' attribute - this is the partition we booted from successfully. The script will log success and remove the attribute. All the GPT updates we do here goes to both primary and backup GPT if they are valid. We don't touch headers or partition tables when checksum doesn't match. Reviewed by: arch (Message-ID: <20100917234542.GE1902@garage.freebsd.pl>) Obtained from: Wheel Systems Sp. z o.o. http://www.wheelsystems.com MFC after: 2 weeks
2010-09-24 19:49:12 +00:00
#define MAXBDDEV 31
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
extern uint32_t _end;
#ifdef GPT
static const uuid_t freebsd_zfs_uuid = GPT_ENT_TYPE_FREEBSD_ZFS;
#endif
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
static const char optstr[NOPT] = "DhaCcdgmnpqrsv"; /* Also 'P', 'S' */
static const unsigned char flags[NOPT] = {
RBX_DUAL,
RBX_SERIAL,
RBX_ASKNAME,
RBX_CDROM,
RBX_CONFIG,
RBX_KDB,
RBX_GDB,
RBX_MUTE,
RBX_NOINTR,
RBX_PAUSE,
RBX_QUIET,
RBX_DFLTROOT,
RBX_SINGLE,
RBX_VERBOSE
};
- Split code shared by almost any boot loader into separate files and clean up most layering violations: sys/boot/i386/common/rbx.h: RBX_* defines OPT_SET() OPT_CHECK() sys/boot/common/util.[ch]: memcpy() memset() memcmp() bcpy() bzero() bcmp() strcmp() strncmp() [new] strcpy() strcat() strchr() strlen() printf() sys/boot/i386/common/cons.[ch]: ioctrl putc() xputc() putchar() getc() xgetc() keyhit() [now takes number of seconds as an argument] getstr() sys/boot/i386/common/drv.[ch]: struct dsk drvread() drvwrite() [new] drvsize() [new] sys/boot/common/crc32.[ch] [new] sys/boot/common/gpt.[ch] [new] - Teach gptboot and gptzfsboot about new files. I haven't touched the rest, but there is still a lot of code duplication to be removed. - Implement full GPT support. Currently we just read primary header and partition table and don't care about checksums, etc. After this change we verify checksums of primary header and primary partition table and if there is a problem we fall back to backup header and backup partition table. - Clean up most messages to use prefix of boot program, so in case of an error we know where the error comes from, eg.: gptboot: unable to read primary GPT header - If we can't boot, print boot prompt only once and not every five seconds. - Honour newly added GPT attributes: bootme - this is bootable partition bootonce - try to boot from this partition only once bootfailed - we failed to boot from this partition - Change boot order of gptboot to the following: 1. Try to boot from all the partitions that have both 'bootme' and 'bootonce' attributes one by one. 2. Try to boot from all the partitions that have only 'bootme' attribute one by one. 3. If there are no partitions with 'bootme' attribute, boot from the first UFS partition. - The 'bootonce' functionality is implemented in the following way: 1. Walk through all the partitions and when 'bootonce' attribute is found without 'bootme' attribute, remove 'bootonce' attribute and set 'bootfailed' attribute. 'bootonce' attribute alone means that we tried to boot from this partition, but boot failed after leaving gptboot and machine was restarted. 2. Find partition with both 'bootme' and 'bootonce' attributes. 3. Remove 'bootme' attribute. 4. Try to execute /boot/loader or /boot/kernel/kernel from that partition. If succeeded we stop here. 5. If execution failed, remove 'bootonce' and set 'bootfailed'. 6. Go to 2. If whole boot succeeded there is new /etc/rc.d/gptboot script coming that will log all partitions that we failed to boot from (the ones with 'bootfailed' attribute) and will remove this attribute. It will also find partition with 'bootonce' attribute - this is the partition we booted from successfully. The script will log success and remove the attribute. All the GPT updates we do here goes to both primary and backup GPT if they are valid. We don't touch headers or partition tables when checksum doesn't match. Reviewed by: arch (Message-ID: <20100917234542.GE1902@garage.freebsd.pl>) Obtained from: Wheel Systems Sp. z o.o. http://www.wheelsystems.com MFC after: 2 weeks
2010-09-24 19:49:12 +00:00
uint32_t opts;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
static const char *const dev_nm[NDEV] = {"ad", "da", "fd"};
static const unsigned char dev_maj[NDEV] = {30, 4, 2};
static char cmd[512];
static char cmddup[512];
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
static char kname[1024];
static int comspeed = SIOSPD;
static struct bootinfo bootinfo;
static uint32_t bootdev;
vm_offset_t high_heap_base;
uint32_t bios_basemem, bios_extmem, high_heap_size;
static struct bios_smap smap;
/*
* The minimum amount of memory to reserve in bios_extmem for the heap.
*/
#define HEAP_MIN (3 * 1024 * 1024)
static char *heap_next;
static char *heap_end;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
/* Buffers that must not span a 64k boundary. */
#define READ_BUF_SIZE 8192
struct dmadat {
char rdbuf[READ_BUF_SIZE]; /* for reading large things */
char secbuf[READ_BUF_SIZE]; /* for MBR/disklabel */
};
static struct dmadat *dmadat;
void exit(int);
static void load(void);
static int parse(void);
static void bios_getmem(void);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
static void *
malloc(size_t n)
{
char *p = heap_next;
if (p + n > heap_end) {
printf("malloc failure\n");
for (;;)
;
return 0;
}
heap_next += n;
return p;
}
static char *
strdup(const char *s)
{
char *p = malloc(strlen(s) + 1);
strcpy(p, s);
return p;
}
#include "zfsimpl.c"
/*
* Read from a dnode (which must be from a ZPL filesystem).
*/
static int
zfs_read(spa_t *spa, const dnode_phys_t *dnode, off_t *offp, void *start, size_t size)
{
const znode_phys_t *zp = (const znode_phys_t *) dnode->dn_bonus;
size_t n;
int rc;
n = size;
if (*offp + n > zp->zp_size)
n = zp->zp_size - *offp;
rc = dnode_read(spa, dnode, *offp, start, n);
if (rc)
return (-1);
*offp += n;
return (n);
}
/*
* Current ZFS pool
*/
spa_t *spa;
/*
* A wrapper for dskread that doesn't have to worry about whether the
* buffer pointer crosses a 64k boundary.
*/
static int
vdev_read(vdev_t *vdev, void *priv, off_t off, void *buf, size_t bytes)
{
char *p;
daddr_t lba;
unsigned int nb;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
struct dsk *dsk = (struct dsk *) priv;
if ((off & (DEV_BSIZE - 1)) || (bytes & (DEV_BSIZE - 1)))
return -1;
p = buf;
lba = off / DEV_BSIZE;
- Split code shared by almost any boot loader into separate files and clean up most layering violations: sys/boot/i386/common/rbx.h: RBX_* defines OPT_SET() OPT_CHECK() sys/boot/common/util.[ch]: memcpy() memset() memcmp() bcpy() bzero() bcmp() strcmp() strncmp() [new] strcpy() strcat() strchr() strlen() printf() sys/boot/i386/common/cons.[ch]: ioctrl putc() xputc() putchar() getc() xgetc() keyhit() [now takes number of seconds as an argument] getstr() sys/boot/i386/common/drv.[ch]: struct dsk drvread() drvwrite() [new] drvsize() [new] sys/boot/common/crc32.[ch] [new] sys/boot/common/gpt.[ch] [new] - Teach gptboot and gptzfsboot about new files. I haven't touched the rest, but there is still a lot of code duplication to be removed. - Implement full GPT support. Currently we just read primary header and partition table and don't care about checksums, etc. After this change we verify checksums of primary header and primary partition table and if there is a problem we fall back to backup header and backup partition table. - Clean up most messages to use prefix of boot program, so in case of an error we know where the error comes from, eg.: gptboot: unable to read primary GPT header - If we can't boot, print boot prompt only once and not every five seconds. - Honour newly added GPT attributes: bootme - this is bootable partition bootonce - try to boot from this partition only once bootfailed - we failed to boot from this partition - Change boot order of gptboot to the following: 1. Try to boot from all the partitions that have both 'bootme' and 'bootonce' attributes one by one. 2. Try to boot from all the partitions that have only 'bootme' attribute one by one. 3. If there are no partitions with 'bootme' attribute, boot from the first UFS partition. - The 'bootonce' functionality is implemented in the following way: 1. Walk through all the partitions and when 'bootonce' attribute is found without 'bootme' attribute, remove 'bootonce' attribute and set 'bootfailed' attribute. 'bootonce' attribute alone means that we tried to boot from this partition, but boot failed after leaving gptboot and machine was restarted. 2. Find partition with both 'bootme' and 'bootonce' attributes. 3. Remove 'bootme' attribute. 4. Try to execute /boot/loader or /boot/kernel/kernel from that partition. If succeeded we stop here. 5. If execution failed, remove 'bootonce' and set 'bootfailed'. 6. Go to 2. If whole boot succeeded there is new /etc/rc.d/gptboot script coming that will log all partitions that we failed to boot from (the ones with 'bootfailed' attribute) and will remove this attribute. It will also find partition with 'bootonce' attribute - this is the partition we booted from successfully. The script will log success and remove the attribute. All the GPT updates we do here goes to both primary and backup GPT if they are valid. We don't touch headers or partition tables when checksum doesn't match. Reviewed by: arch (Message-ID: <20100917234542.GE1902@garage.freebsd.pl>) Obtained from: Wheel Systems Sp. z o.o. http://www.wheelsystems.com MFC after: 2 weeks
2010-09-24 19:49:12 +00:00
lba += dsk->start;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
while (bytes > 0) {
nb = bytes / DEV_BSIZE;
if (nb > READ_BUF_SIZE / DEV_BSIZE)
nb = READ_BUF_SIZE / DEV_BSIZE;
if (drvread(dsk, dmadat->rdbuf, lba, nb))
return -1;
memcpy(p, dmadat->rdbuf, nb * DEV_BSIZE);
p += nb * DEV_BSIZE;
lba += nb;
bytes -= nb * DEV_BSIZE;
}
return 0;
}
static int
xfsread(const dnode_phys_t *dnode, off_t *offp, void *buf, size_t nbyte)
{
if ((size_t)zfs_read(spa, dnode, offp, buf, nbyte) != nbyte) {
printf("Invalid %s\n", "format");
return -1;
}
return 0;
}
static void
bios_getmem(void)
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
{
uint64_t size;
/* Parse system memory map */
v86.ebx = 0;
do {
v86.ctl = V86_FLAGS;
v86.addr = 0x15; /* int 0x15 function 0xe820*/
v86.eax = 0xe820;
v86.ecx = sizeof(struct bios_smap);
v86.edx = SMAP_SIG;
v86.es = VTOPSEG(&smap);
v86.edi = VTOPOFF(&smap);
v86int();
if ((v86.efl & 1) || (v86.eax != SMAP_SIG))
break;
/* look for a low-memory segment that's large enough */
if ((smap.type == SMAP_TYPE_MEMORY) && (smap.base == 0) &&
(smap.length >= (512 * 1024)))
bios_basemem = smap.length;
/* look for the first segment in 'extended' memory */
if ((smap.type == SMAP_TYPE_MEMORY) && (smap.base == 0x100000)) {
bios_extmem = smap.length;
}
/*
* Look for the largest segment in 'extended' memory beyond
* 1MB but below 4GB.
*/
if ((smap.type == SMAP_TYPE_MEMORY) && (smap.base > 0x100000) &&
(smap.base < 0x100000000ull)) {
size = smap.length;
/*
* If this segment crosses the 4GB boundary, truncate it.
*/
if (smap.base + size > 0x100000000ull)
size = 0x100000000ull - smap.base;
if (size > high_heap_size) {
high_heap_size = size;
high_heap_base = smap.base;
}
}
} while (v86.ebx != 0);
/* Fall back to the old compatibility function for base memory */
if (bios_basemem == 0) {
v86.ctl = 0;
v86.addr = 0x12; /* int 0x12 */
v86int();
bios_basemem = (v86.eax & 0xffff) * 1024;
}
/* Fall back through several compatibility functions for extended memory */
if (bios_extmem == 0) {
v86.ctl = V86_FLAGS;
v86.addr = 0x15; /* int 0x15 function 0xe801*/
v86.eax = 0xe801;
v86int();
if (!(v86.efl & 1)) {
bios_extmem = ((v86.ecx & 0xffff) + ((v86.edx & 0xffff) * 64)) * 1024;
}
}
if (bios_extmem == 0) {
v86.ctl = 0;
v86.addr = 0x15; /* int 0x15 function 0x88*/
v86.eax = 0x8800;
v86int();
bios_extmem = (v86.eax & 0xffff) * 1024;
}
/*
* If we have extended memory and did not find a suitable heap
* region in the SMAP, use the last 3MB of 'extended' memory as a
* high heap candidate.
*/
if (bios_extmem >= HEAP_MIN && high_heap_size < HEAP_MIN) {
high_heap_size = HEAP_MIN;
high_heap_base = bios_extmem + 0x100000 - HEAP_MIN;
}
}
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
/*
* Try to detect a device supported by the legacy int13 BIOS
*/
static int
int13probe(int drive)
{
v86.ctl = V86_FLAGS;
v86.addr = 0x13;
v86.eax = 0x800;
v86.edx = drive;
v86int();
if (!(v86.efl & 0x1) && /* carry clear */
((v86.edx & 0xff) != (drive & DRV_MASK))) { /* unit # OK */
if ((v86.ecx & 0x3f) == 0) { /* absurd sector size */
return(0); /* skip device */
}
return (1);
}
return(0);
}
/*
* We call this when we find a ZFS vdev - ZFS consumes the dsk
* structure so we must make a new one.
*/
static struct dsk *
copy_dsk(struct dsk *dsk)
{
struct dsk *newdsk;
newdsk = malloc(sizeof(struct dsk));
*newdsk = *dsk;
return (newdsk);
}
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
static void
probe_drive(struct dsk *dsk, spa_t **spap)
{
#ifdef GPT
struct gpt_hdr hdr;
struct gpt_ent *ent;
daddr_t slba, elba;
unsigned part, entries_per_sec;
#endif
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
struct dos_partition *dp;
char *sec;
unsigned i;
/*
* If we find a vdev on the whole disk, stop here. Otherwise dig
* out the MBR and probe each slice in turn for a vdev.
*/
if (vdev_probe(vdev_read, dsk, spap) == 0)
return;
sec = dmadat->secbuf;
dsk->start = 0;
#ifdef GPT
/*
* First check for GPT.
*/
if (drvread(dsk, sec, 1, 1)) {
return;
}
memcpy(&hdr, sec, sizeof(hdr));
if (memcmp(hdr.hdr_sig, GPT_HDR_SIG, sizeof(hdr.hdr_sig)) != 0 ||
hdr.hdr_lba_self != 1 || hdr.hdr_revision < 0x00010000 ||
hdr.hdr_entsz < sizeof(*ent) || DEV_BSIZE % hdr.hdr_entsz != 0) {
goto trymbr;
}
/*
* Probe all GPT partitions for the presense of ZFS pools. We
* return the spa_t for the first we find (if requested). This
* will have the effect of booting from the first pool on the
* disk.
*/
entries_per_sec = DEV_BSIZE / hdr.hdr_entsz;
slba = hdr.hdr_lba_table;
elba = slba + hdr.hdr_entries / entries_per_sec;
while (slba < elba) {
dsk->start = 0;
if (drvread(dsk, sec, slba, 1))
return;
for (part = 0; part < entries_per_sec; part++) {
ent = (struct gpt_ent *)(sec + part * hdr.hdr_entsz);
if (memcmp(&ent->ent_type, &freebsd_zfs_uuid,
sizeof(uuid_t)) == 0) {
dsk->start = ent->ent_lba_start;
if (vdev_probe(vdev_read, dsk, spap) == 0) {
/*
* We record the first pool we find (we will try
* to boot from that one).
*/
- Split code shared by almost any boot loader into separate files and clean up most layering violations: sys/boot/i386/common/rbx.h: RBX_* defines OPT_SET() OPT_CHECK() sys/boot/common/util.[ch]: memcpy() memset() memcmp() bcpy() bzero() bcmp() strcmp() strncmp() [new] strcpy() strcat() strchr() strlen() printf() sys/boot/i386/common/cons.[ch]: ioctrl putc() xputc() putchar() getc() xgetc() keyhit() [now takes number of seconds as an argument] getstr() sys/boot/i386/common/drv.[ch]: struct dsk drvread() drvwrite() [new] drvsize() [new] sys/boot/common/crc32.[ch] [new] sys/boot/common/gpt.[ch] [new] - Teach gptboot and gptzfsboot about new files. I haven't touched the rest, but there is still a lot of code duplication to be removed. - Implement full GPT support. Currently we just read primary header and partition table and don't care about checksums, etc. After this change we verify checksums of primary header and primary partition table and if there is a problem we fall back to backup header and backup partition table. - Clean up most messages to use prefix of boot program, so in case of an error we know where the error comes from, eg.: gptboot: unable to read primary GPT header - If we can't boot, print boot prompt only once and not every five seconds. - Honour newly added GPT attributes: bootme - this is bootable partition bootonce - try to boot from this partition only once bootfailed - we failed to boot from this partition - Change boot order of gptboot to the following: 1. Try to boot from all the partitions that have both 'bootme' and 'bootonce' attributes one by one. 2. Try to boot from all the partitions that have only 'bootme' attribute one by one. 3. If there are no partitions with 'bootme' attribute, boot from the first UFS partition. - The 'bootonce' functionality is implemented in the following way: 1. Walk through all the partitions and when 'bootonce' attribute is found without 'bootme' attribute, remove 'bootonce' attribute and set 'bootfailed' attribute. 'bootonce' attribute alone means that we tried to boot from this partition, but boot failed after leaving gptboot and machine was restarted. 2. Find partition with both 'bootme' and 'bootonce' attributes. 3. Remove 'bootme' attribute. 4. Try to execute /boot/loader or /boot/kernel/kernel from that partition. If succeeded we stop here. 5. If execution failed, remove 'bootonce' and set 'bootfailed'. 6. Go to 2. If whole boot succeeded there is new /etc/rc.d/gptboot script coming that will log all partitions that we failed to boot from (the ones with 'bootfailed' attribute) and will remove this attribute. It will also find partition with 'bootonce' attribute - this is the partition we booted from successfully. The script will log success and remove the attribute. All the GPT updates we do here goes to both primary and backup GPT if they are valid. We don't touch headers or partition tables when checksum doesn't match. Reviewed by: arch (Message-ID: <20100917234542.GE1902@garage.freebsd.pl>) Obtained from: Wheel Systems Sp. z o.o. http://www.wheelsystems.com MFC after: 2 weeks
2010-09-24 19:49:12 +00:00
spap = NULL;
/*
* This slice had a vdev. We need a new dsk
* structure now since the vdev now owns this one.
*/
dsk = copy_dsk(dsk);
}
}
}
slba++;
}
return;
trymbr:
#endif
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
if (drvread(dsk, sec, DOSBBSECTOR, 1))
return;
dp = (void *)(sec + DOSPARTOFF);
for (i = 0; i < NDOSPART; i++) {
if (!dp[i].dp_typ)
continue;
dsk->start = dp[i].dp_start;
if (vdev_probe(vdev_read, dsk, spap) == 0) {
/*
* We record the first pool we find (we will try to boot
* from that one.
*/
spap = 0;
/*
* This slice had a vdev. We need a new dsk structure now
* since the vdev now owns this one.
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
*/
dsk = copy_dsk(dsk);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}
}
}
int
main(void)
{
int autoboot, i;
dnode_phys_t dn;
off_t off;
struct dsk *dsk;
dmadat = (void *)(roundup2(__base + (int32_t)&_end, 0x10000) - __base);
bios_getmem();
if (high_heap_size > 0) {
heap_end = PTOV(high_heap_base + high_heap_size);
heap_next = PTOV(high_heap_base);
} else {
heap_next = (char *) dmadat + sizeof(*dmadat);
heap_end = (char *) PTOV(bios_basemem);
}
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
dsk = malloc(sizeof(struct dsk));
dsk->drive = *(uint8_t *)PTOV(ARGS);
dsk->type = dsk->drive & DRV_HARD ? TYPE_AD : TYPE_FD;
dsk->unit = dsk->drive & DRV_MASK;
dsk->slice = *(uint8_t *)PTOV(ARGS + 1) + 1;
dsk->part = 0;
dsk->start = 0;
dsk->init = 0;
bootinfo.bi_version = BOOTINFO_VERSION;
bootinfo.bi_size = sizeof(bootinfo);
bootinfo.bi_basemem = bios_basemem / 1024;
bootinfo.bi_extmem = bios_extmem / 1024;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
bootinfo.bi_memsizes_valid++;
bootinfo.bi_bios_dev = dsk->drive;
bootdev = MAKEBOOTDEV(dev_maj[dsk->type],
dsk->slice, dsk->unit, dsk->part),
/* Process configuration file */
autoboot = 1;
zfs_init();
/*
* Probe the boot drive first - we will try to boot from whatever
* pool we find on that drive.
*/
probe_drive(dsk, &spa);
/*
* Probe the rest of the drives that the bios knows about. This
* will find any other available pools and it may fill in missing
* vdevs for the boot pool.
*/
#ifndef VIRTUALBOX
for (i = 0; i < *(unsigned char *)PTOV(BIOS_NUMDRIVES); i++)
#else
for (i = 0; i < MAXBDDEV; i++)
#endif
{
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
if ((i | DRV_HARD) == *(uint8_t *)PTOV(ARGS))
continue;
if (!int13probe(i | DRV_HARD))
break;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
dsk = malloc(sizeof(struct dsk));
dsk->drive = i | DRV_HARD;
dsk->type = dsk->drive & TYPE_AD;
dsk->unit = i;
dsk->slice = 0;
dsk->part = 0;
dsk->start = 0;
dsk->init = 0;
- Split code shared by almost any boot loader into separate files and clean up most layering violations: sys/boot/i386/common/rbx.h: RBX_* defines OPT_SET() OPT_CHECK() sys/boot/common/util.[ch]: memcpy() memset() memcmp() bcpy() bzero() bcmp() strcmp() strncmp() [new] strcpy() strcat() strchr() strlen() printf() sys/boot/i386/common/cons.[ch]: ioctrl putc() xputc() putchar() getc() xgetc() keyhit() [now takes number of seconds as an argument] getstr() sys/boot/i386/common/drv.[ch]: struct dsk drvread() drvwrite() [new] drvsize() [new] sys/boot/common/crc32.[ch] [new] sys/boot/common/gpt.[ch] [new] - Teach gptboot and gptzfsboot about new files. I haven't touched the rest, but there is still a lot of code duplication to be removed. - Implement full GPT support. Currently we just read primary header and partition table and don't care about checksums, etc. After this change we verify checksums of primary header and primary partition table and if there is a problem we fall back to backup header and backup partition table. - Clean up most messages to use prefix of boot program, so in case of an error we know where the error comes from, eg.: gptboot: unable to read primary GPT header - If we can't boot, print boot prompt only once and not every five seconds. - Honour newly added GPT attributes: bootme - this is bootable partition bootonce - try to boot from this partition only once bootfailed - we failed to boot from this partition - Change boot order of gptboot to the following: 1. Try to boot from all the partitions that have both 'bootme' and 'bootonce' attributes one by one. 2. Try to boot from all the partitions that have only 'bootme' attribute one by one. 3. If there are no partitions with 'bootme' attribute, boot from the first UFS partition. - The 'bootonce' functionality is implemented in the following way: 1. Walk through all the partitions and when 'bootonce' attribute is found without 'bootme' attribute, remove 'bootonce' attribute and set 'bootfailed' attribute. 'bootonce' attribute alone means that we tried to boot from this partition, but boot failed after leaving gptboot and machine was restarted. 2. Find partition with both 'bootme' and 'bootonce' attributes. 3. Remove 'bootme' attribute. 4. Try to execute /boot/loader or /boot/kernel/kernel from that partition. If succeeded we stop here. 5. If execution failed, remove 'bootonce' and set 'bootfailed'. 6. Go to 2. If whole boot succeeded there is new /etc/rc.d/gptboot script coming that will log all partitions that we failed to boot from (the ones with 'bootfailed' attribute) and will remove this attribute. It will also find partition with 'bootonce' attribute - this is the partition we booted from successfully. The script will log success and remove the attribute. All the GPT updates we do here goes to both primary and backup GPT if they are valid. We don't touch headers or partition tables when checksum doesn't match. Reviewed by: arch (Message-ID: <20100917234542.GE1902@garage.freebsd.pl>) Obtained from: Wheel Systems Sp. z o.o. http://www.wheelsystems.com MFC after: 2 weeks
2010-09-24 19:49:12 +00:00
probe_drive(dsk, NULL);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}
/*
* If we didn't find a pool on the boot drive, default to the
* first pool we found, if any.
*/
if (!spa) {
spa = STAILQ_FIRST(&zfs_pools);
if (!spa) {
- Split code shared by almost any boot loader into separate files and clean up most layering violations: sys/boot/i386/common/rbx.h: RBX_* defines OPT_SET() OPT_CHECK() sys/boot/common/util.[ch]: memcpy() memset() memcmp() bcpy() bzero() bcmp() strcmp() strncmp() [new] strcpy() strcat() strchr() strlen() printf() sys/boot/i386/common/cons.[ch]: ioctrl putc() xputc() putchar() getc() xgetc() keyhit() [now takes number of seconds as an argument] getstr() sys/boot/i386/common/drv.[ch]: struct dsk drvread() drvwrite() [new] drvsize() [new] sys/boot/common/crc32.[ch] [new] sys/boot/common/gpt.[ch] [new] - Teach gptboot and gptzfsboot about new files. I haven't touched the rest, but there is still a lot of code duplication to be removed. - Implement full GPT support. Currently we just read primary header and partition table and don't care about checksums, etc. After this change we verify checksums of primary header and primary partition table and if there is a problem we fall back to backup header and backup partition table. - Clean up most messages to use prefix of boot program, so in case of an error we know where the error comes from, eg.: gptboot: unable to read primary GPT header - If we can't boot, print boot prompt only once and not every five seconds. - Honour newly added GPT attributes: bootme - this is bootable partition bootonce - try to boot from this partition only once bootfailed - we failed to boot from this partition - Change boot order of gptboot to the following: 1. Try to boot from all the partitions that have both 'bootme' and 'bootonce' attributes one by one. 2. Try to boot from all the partitions that have only 'bootme' attribute one by one. 3. If there are no partitions with 'bootme' attribute, boot from the first UFS partition. - The 'bootonce' functionality is implemented in the following way: 1. Walk through all the partitions and when 'bootonce' attribute is found without 'bootme' attribute, remove 'bootonce' attribute and set 'bootfailed' attribute. 'bootonce' attribute alone means that we tried to boot from this partition, but boot failed after leaving gptboot and machine was restarted. 2. Find partition with both 'bootme' and 'bootonce' attributes. 3. Remove 'bootme' attribute. 4. Try to execute /boot/loader or /boot/kernel/kernel from that partition. If succeeded we stop here. 5. If execution failed, remove 'bootonce' and set 'bootfailed'. 6. Go to 2. If whole boot succeeded there is new /etc/rc.d/gptboot script coming that will log all partitions that we failed to boot from (the ones with 'bootfailed' attribute) and will remove this attribute. It will also find partition with 'bootonce' attribute - this is the partition we booted from successfully. The script will log success and remove the attribute. All the GPT updates we do here goes to both primary and backup GPT if they are valid. We don't touch headers or partition tables when checksum doesn't match. Reviewed by: arch (Message-ID: <20100917234542.GE1902@garage.freebsd.pl>) Obtained from: Wheel Systems Sp. z o.o. http://www.wheelsystems.com MFC after: 2 weeks
2010-09-24 19:49:12 +00:00
printf("%s: No ZFS pools located, can't boot\n", BOOTPROG);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
for (;;)
;
}
}
zfs_mount_pool(spa);
if (zfs_lookup(spa, PATH_CONFIG, &dn) == 0 ||
zfs_lookup(spa, PATH_DOTCONFIG, &dn) == 0) {
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
off = 0;
zfs_read(spa, &dn, &off, cmd, sizeof(cmd));
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}
if (*cmd) {
/*
* Note that parse() is destructive to cmd[] and we also want
* to honor RBX_QUIET option that could be present in cmd[].
*/
memcpy(cmddup, cmd, sizeof(cmd));
if (parse())
autoboot = 0;
if (!OPT_CHECK(RBX_QUIET))
printf("%s: %s", PATH_CONFIG, cmddup);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
/* Do not process this command twice */
*cmd = 0;
}
/*
* Try to exec stage 3 boot loader. If interrupted by a keypress,
* or in case of failure, try to load a kernel directly instead.
*/
if (autoboot && !*kname) {
memcpy(kname, PATH_BOOT3, sizeof(PATH_BOOT3));
- Split code shared by almost any boot loader into separate files and clean up most layering violations: sys/boot/i386/common/rbx.h: RBX_* defines OPT_SET() OPT_CHECK() sys/boot/common/util.[ch]: memcpy() memset() memcmp() bcpy() bzero() bcmp() strcmp() strncmp() [new] strcpy() strcat() strchr() strlen() printf() sys/boot/i386/common/cons.[ch]: ioctrl putc() xputc() putchar() getc() xgetc() keyhit() [now takes number of seconds as an argument] getstr() sys/boot/i386/common/drv.[ch]: struct dsk drvread() drvwrite() [new] drvsize() [new] sys/boot/common/crc32.[ch] [new] sys/boot/common/gpt.[ch] [new] - Teach gptboot and gptzfsboot about new files. I haven't touched the rest, but there is still a lot of code duplication to be removed. - Implement full GPT support. Currently we just read primary header and partition table and don't care about checksums, etc. After this change we verify checksums of primary header and primary partition table and if there is a problem we fall back to backup header and backup partition table. - Clean up most messages to use prefix of boot program, so in case of an error we know where the error comes from, eg.: gptboot: unable to read primary GPT header - If we can't boot, print boot prompt only once and not every five seconds. - Honour newly added GPT attributes: bootme - this is bootable partition bootonce - try to boot from this partition only once bootfailed - we failed to boot from this partition - Change boot order of gptboot to the following: 1. Try to boot from all the partitions that have both 'bootme' and 'bootonce' attributes one by one. 2. Try to boot from all the partitions that have only 'bootme' attribute one by one. 3. If there are no partitions with 'bootme' attribute, boot from the first UFS partition. - The 'bootonce' functionality is implemented in the following way: 1. Walk through all the partitions and when 'bootonce' attribute is found without 'bootme' attribute, remove 'bootonce' attribute and set 'bootfailed' attribute. 'bootonce' attribute alone means that we tried to boot from this partition, but boot failed after leaving gptboot and machine was restarted. 2. Find partition with both 'bootme' and 'bootonce' attributes. 3. Remove 'bootme' attribute. 4. Try to execute /boot/loader or /boot/kernel/kernel from that partition. If succeeded we stop here. 5. If execution failed, remove 'bootonce' and set 'bootfailed'. 6. Go to 2. If whole boot succeeded there is new /etc/rc.d/gptboot script coming that will log all partitions that we failed to boot from (the ones with 'bootfailed' attribute) and will remove this attribute. It will also find partition with 'bootonce' attribute - this is the partition we booted from successfully. The script will log success and remove the attribute. All the GPT updates we do here goes to both primary and backup GPT if they are valid. We don't touch headers or partition tables when checksum doesn't match. Reviewed by: arch (Message-ID: <20100917234542.GE1902@garage.freebsd.pl>) Obtained from: Wheel Systems Sp. z o.o. http://www.wheelsystems.com MFC after: 2 weeks
2010-09-24 19:49:12 +00:00
if (!keyhit(3)) {
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
load();
memcpy(kname, PATH_KERNEL, sizeof(PATH_KERNEL));
}
}
/* Present the user with the boot2 prompt. */
for (;;) {
if (!autoboot || !OPT_CHECK(RBX_QUIET))
printf("\nFreeBSD/x86 boot\n"
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
"Default: %s:%s\n"
"boot: ",
spa->spa_name, kname);
if (ioctrl & IO_SERIAL)
sio_flush();
- Split code shared by almost any boot loader into separate files and clean up most layering violations: sys/boot/i386/common/rbx.h: RBX_* defines OPT_SET() OPT_CHECK() sys/boot/common/util.[ch]: memcpy() memset() memcmp() bcpy() bzero() bcmp() strcmp() strncmp() [new] strcpy() strcat() strchr() strlen() printf() sys/boot/i386/common/cons.[ch]: ioctrl putc() xputc() putchar() getc() xgetc() keyhit() [now takes number of seconds as an argument] getstr() sys/boot/i386/common/drv.[ch]: struct dsk drvread() drvwrite() [new] drvsize() [new] sys/boot/common/crc32.[ch] [new] sys/boot/common/gpt.[ch] [new] - Teach gptboot and gptzfsboot about new files. I haven't touched the rest, but there is still a lot of code duplication to be removed. - Implement full GPT support. Currently we just read primary header and partition table and don't care about checksums, etc. After this change we verify checksums of primary header and primary partition table and if there is a problem we fall back to backup header and backup partition table. - Clean up most messages to use prefix of boot program, so in case of an error we know where the error comes from, eg.: gptboot: unable to read primary GPT header - If we can't boot, print boot prompt only once and not every five seconds. - Honour newly added GPT attributes: bootme - this is bootable partition bootonce - try to boot from this partition only once bootfailed - we failed to boot from this partition - Change boot order of gptboot to the following: 1. Try to boot from all the partitions that have both 'bootme' and 'bootonce' attributes one by one. 2. Try to boot from all the partitions that have only 'bootme' attribute one by one. 3. If there are no partitions with 'bootme' attribute, boot from the first UFS partition. - The 'bootonce' functionality is implemented in the following way: 1. Walk through all the partitions and when 'bootonce' attribute is found without 'bootme' attribute, remove 'bootonce' attribute and set 'bootfailed' attribute. 'bootonce' attribute alone means that we tried to boot from this partition, but boot failed after leaving gptboot and machine was restarted. 2. Find partition with both 'bootme' and 'bootonce' attributes. 3. Remove 'bootme' attribute. 4. Try to execute /boot/loader or /boot/kernel/kernel from that partition. If succeeded we stop here. 5. If execution failed, remove 'bootonce' and set 'bootfailed'. 6. Go to 2. If whole boot succeeded there is new /etc/rc.d/gptboot script coming that will log all partitions that we failed to boot from (the ones with 'bootfailed' attribute) and will remove this attribute. It will also find partition with 'bootonce' attribute - this is the partition we booted from successfully. The script will log success and remove the attribute. All the GPT updates we do here goes to both primary and backup GPT if they are valid. We don't touch headers or partition tables when checksum doesn't match. Reviewed by: arch (Message-ID: <20100917234542.GE1902@garage.freebsd.pl>) Obtained from: Wheel Systems Sp. z o.o. http://www.wheelsystems.com MFC after: 2 weeks
2010-09-24 19:49:12 +00:00
if (!autoboot || keyhit(5))
getstr(cmd, sizeof(cmd));
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
else if (!autoboot || !OPT_CHECK(RBX_QUIET))
putchar('\n');
autoboot = 0;
if (parse())
putchar('\a');
else
load();
}
}
/* XXX - Needed for btxld to link the boot2 binary; do not remove. */
void
exit(int x)
{
}
static void
load(void)
{
union {
struct exec ex;
Elf32_Ehdr eh;
} hdr;
static Elf32_Phdr ep[2];
static Elf32_Shdr es[2];
caddr_t p;
dnode_phys_t dn;
off_t off;
uint32_t addr, x;
int fmt, i, j;
if (zfs_lookup(spa, kname, &dn)) {
return;
}
off = 0;
if (xfsread(&dn, &off, &hdr, sizeof(hdr)))
return;
if (N_GETMAGIC(hdr.ex) == ZMAGIC)
fmt = 0;
else if (IS_ELF(hdr.eh))
fmt = 1;
else {
printf("Invalid %s\n", "format");
return;
}
if (fmt == 0) {
addr = hdr.ex.a_entry & 0xffffff;
p = PTOV(addr);
off = PAGE_SIZE;
if (xfsread(&dn, &off, p, hdr.ex.a_text))
return;
p += roundup2(hdr.ex.a_text, PAGE_SIZE);
if (xfsread(&dn, &off, p, hdr.ex.a_data))
return;
p += hdr.ex.a_data + roundup2(hdr.ex.a_bss, PAGE_SIZE);
bootinfo.bi_symtab = VTOP(p);
memcpy(p, &hdr.ex.a_syms, sizeof(hdr.ex.a_syms));
p += sizeof(hdr.ex.a_syms);
if (hdr.ex.a_syms) {
if (xfsread(&dn, &off, p, hdr.ex.a_syms))
return;
p += hdr.ex.a_syms;
if (xfsread(&dn, &off, p, sizeof(int)))
return;
x = *(uint32_t *)p;
p += sizeof(int);
x -= sizeof(int);
if (xfsread(&dn, &off, p, x))
return;
p += x;
}
} else {
off = hdr.eh.e_phoff;
for (j = i = 0; i < hdr.eh.e_phnum && j < 2; i++) {
if (xfsread(&dn, &off, ep + j, sizeof(ep[0])))
return;
if (ep[j].p_type == PT_LOAD)
j++;
}
for (i = 0; i < 2; i++) {
p = PTOV(ep[i].p_paddr & 0xffffff);
off = ep[i].p_offset;
if (xfsread(&dn, &off, p, ep[i].p_filesz))
return;
}
p += roundup2(ep[1].p_memsz, PAGE_SIZE);
bootinfo.bi_symtab = VTOP(p);
if (hdr.eh.e_shnum == hdr.eh.e_shstrndx + 3) {
off = hdr.eh.e_shoff + sizeof(es[0]) *
(hdr.eh.e_shstrndx + 1);
if (xfsread(&dn, &off, &es, sizeof(es)))
return;
for (i = 0; i < 2; i++) {
memcpy(p, &es[i].sh_size, sizeof(es[i].sh_size));
p += sizeof(es[i].sh_size);
off = es[i].sh_offset;
if (xfsread(&dn, &off, p, es[i].sh_size))
return;
p += es[i].sh_size;
}
}
addr = hdr.eh.e_entry & 0xffffff;
}
bootinfo.bi_esymtab = VTOP(p);
bootinfo.bi_kernelname = VTOP(kname);
__exec((caddr_t)addr, RB_BOOTINFO | (opts & RBX_MASK),
bootdev,
KARGS_FLAGS_ZFS,
(uint32_t) spa->spa_guid,
(uint32_t) (spa->spa_guid >> 32),
VTOP(&bootinfo));
}
static int
- Split code shared by almost any boot loader into separate files and clean up most layering violations: sys/boot/i386/common/rbx.h: RBX_* defines OPT_SET() OPT_CHECK() sys/boot/common/util.[ch]: memcpy() memset() memcmp() bcpy() bzero() bcmp() strcmp() strncmp() [new] strcpy() strcat() strchr() strlen() printf() sys/boot/i386/common/cons.[ch]: ioctrl putc() xputc() putchar() getc() xgetc() keyhit() [now takes number of seconds as an argument] getstr() sys/boot/i386/common/drv.[ch]: struct dsk drvread() drvwrite() [new] drvsize() [new] sys/boot/common/crc32.[ch] [new] sys/boot/common/gpt.[ch] [new] - Teach gptboot and gptzfsboot about new files. I haven't touched the rest, but there is still a lot of code duplication to be removed. - Implement full GPT support. Currently we just read primary header and partition table and don't care about checksums, etc. After this change we verify checksums of primary header and primary partition table and if there is a problem we fall back to backup header and backup partition table. - Clean up most messages to use prefix of boot program, so in case of an error we know where the error comes from, eg.: gptboot: unable to read primary GPT header - If we can't boot, print boot prompt only once and not every five seconds. - Honour newly added GPT attributes: bootme - this is bootable partition bootonce - try to boot from this partition only once bootfailed - we failed to boot from this partition - Change boot order of gptboot to the following: 1. Try to boot from all the partitions that have both 'bootme' and 'bootonce' attributes one by one. 2. Try to boot from all the partitions that have only 'bootme' attribute one by one. 3. If there are no partitions with 'bootme' attribute, boot from the first UFS partition. - The 'bootonce' functionality is implemented in the following way: 1. Walk through all the partitions and when 'bootonce' attribute is found without 'bootme' attribute, remove 'bootonce' attribute and set 'bootfailed' attribute. 'bootonce' attribute alone means that we tried to boot from this partition, but boot failed after leaving gptboot and machine was restarted. 2. Find partition with both 'bootme' and 'bootonce' attributes. 3. Remove 'bootme' attribute. 4. Try to execute /boot/loader or /boot/kernel/kernel from that partition. If succeeded we stop here. 5. If execution failed, remove 'bootonce' and set 'bootfailed'. 6. Go to 2. If whole boot succeeded there is new /etc/rc.d/gptboot script coming that will log all partitions that we failed to boot from (the ones with 'bootfailed' attribute) and will remove this attribute. It will also find partition with 'bootonce' attribute - this is the partition we booted from successfully. The script will log success and remove the attribute. All the GPT updates we do here goes to both primary and backup GPT if they are valid. We don't touch headers or partition tables when checksum doesn't match. Reviewed by: arch (Message-ID: <20100917234542.GE1902@garage.freebsd.pl>) Obtained from: Wheel Systems Sp. z o.o. http://www.wheelsystems.com MFC after: 2 weeks
2010-09-24 19:49:12 +00:00
parse(void)
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
{
char *arg = cmd;
char *ep, *p, *q;
const char *cp;
//unsigned int drv;
int c, i, j;
while ((c = *arg++)) {
if (c == ' ' || c == '\t' || c == '\n')
continue;
for (p = arg; *p && *p != '\n' && *p != ' ' && *p != '\t'; p++);
ep = p;
if (*p)
*p++ = 0;
if (c == '-') {
while ((c = *arg++)) {
if (c == 'P') {
if (*(uint8_t *)PTOV(0x496) & 0x10) {
cp = "yes";
} else {
opts |= OPT_SET(RBX_DUAL) | OPT_SET(RBX_SERIAL);
cp = "no";
}
printf("Keyboard: %s\n", cp);
continue;
} else if (c == 'S') {
j = 0;
while ((unsigned int)(i = *arg++ - '0') <= 9)
j = j * 10 + i;
if (j > 0 && i == -'0') {
comspeed = j;
break;
}
/* Fall through to error below ('S' not in optstr[]). */
}
for (i = 0; c != optstr[i]; i++)
if (i == NOPT - 1)
return -1;
opts ^= OPT_SET(flags[i]);
}
ioctrl = OPT_CHECK(RBX_DUAL) ? (IO_SERIAL|IO_KEYBOARD) :
OPT_CHECK(RBX_SERIAL) ? IO_SERIAL : IO_KEYBOARD;
if (ioctrl & IO_SERIAL)
sio_init(115200 / comspeed);
} if (c == '?') {
dnode_phys_t dn;
if (zfs_lookup(spa, arg, &dn) == 0) {
zap_list(spa, &dn);
}
return -1;
} else {
arg--;
/*
* Report pool status if the comment is 'status'. Lets
* hope no-one wants to load /status as a kernel.
*/
if (!strcmp(arg, "status")) {
spa_all_status();
return -1;
}
/*
* If there is a colon, switch pools.
*/
q = (char *) strchr(arg, ':');
if (q) {
spa_t *newspa;
*q++ = 0;
newspa = spa_find_by_name(arg);
if (newspa) {
spa = newspa;
zfs_mount_pool(spa);
} else {
printf("\nCan't find ZFS pool %s\n", arg);
return -1;
}
arg = q;
}
if ((i = ep - arg)) {
if ((size_t)i >= sizeof(kname))
return -1;
memcpy(kname, arg, i + 1);
}
}
arg = p;
}
return 0;
}