d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
acf5b0bacb
freebsd-nq/sys/amd64/pci/pci_cfgreg.c

517 lines
12 KiB
C
Raw Normal View History

Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/*
* Copyright (c) 1997, Stefan Esser <se@freebsd.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
$Id$ -> $FreeBSD$
1999-08-28 01:08:13 +00:00
* $FreeBSD$
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
*
*/
Move pcibus (host -> pci bus) probe/attach routines from nexus to pcibus.c. pci_cfgopen() becomes static and there are no more bus #ifdef's in nexus.c.
1999-05-18 20:48:43 +00:00
#include <sys/param.h>
Replace all remaining instances of `i386/include' by `machine' and fix nearby #include inconsistencies.
1995-02-26 05:14:53 +00:00
#include <sys/systm.h>
Move pcibus (host -> pci bus) probe/attach routines from nexus to pcibus.c. pci_cfgopen() becomes static and there are no more bus #ifdef's in nexus.c.
1999-05-18 20:48:43 +00:00
#include <sys/bus.h>
#include <sys/kernel.h>
Reviewed by: se Submitted by: wolf (Wolfgang Stanglmeier) New ISA dependend file for PCI bus support. Replaces sys/i386/pci/pcibios.c.
1995-02-01 23:06:58 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
#include <pci/pcivar.h>
Add support for multiple PCI busses directly connected to the nexus. This is only partially complete, but allows 450NX-based systems with more than one PCI bus to be used again. Submitted by: dfr
1999-07-16 01:00:30 +00:00
#include <pci/pcireg.h>
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
#include <i386/isa/pcibus.h>
Reviewed by: se Submitted by: wolf (Wolfgang Stanglmeier) New ISA dependend file for PCI bus support. Replaces sys/i386/pci/pcibios.c.
1995-02-01 23:06:58 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
#ifdef PCI_COMPAT
/* XXX this is a terrible hack, which keeps the Tekram AMD SCSI driver happy */
#define cfgmech pci_mechanism
int cfgmech;
#else
static int cfgmech;
#endif /* PCI_COMPAT */
static int devmax;
Reviewed by: se Submitted by: wolf (Wolfgang Stanglmeier) New ISA dependend file for PCI bus support. Replaces sys/i386/pci/pcibios.c.
1995-02-01 23:06:58 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* enable configuration space accesses and return data port address */
New ISA specific PCI code. Supports shared PCI interrupts. Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:06:07 +00:00
static int
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
pci_cfgenable(unsigned bus, unsigned slot, unsigned func, int reg, int bytes)
{
int dataport = 0;
if (bus <= PCI_BUSMAX
&& slot < devmax
&& func <= PCI_FUNCMAX
&& reg <= PCI_REGMAX
&& bytes != 3
&& (unsigned) bytes <= 4
&& (reg & (bytes -1)) == 0) {
switch (cfgmech) {
case 1:
Yet another fix for configuration mechanism 1 register accesses: Adjust the data port address by adding the two low order bits of the register number. The address port takes only a word address (i.e. ignores the two low order bits written to it).
1997-05-26 21:52:41 +00:00
outl(CONF1_ADDR_PORT, (1 << 31)
| (bus << 16) | (slot << 11)
| (func << 8) | (reg & ~0x03));
dataport = CONF1_DATA_PORT + (reg & 0x03);
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
break;
case 2:
outb(CONF2_ENABLE_PORT, 0xf0 | (func << 1));
outb(CONF2_FORWARD_PORT, bus);
dataport = 0xc000 | (slot << 8) | reg;
break;
}
}
return (dataport);
}
New ISA specific PCI code. Supports shared PCI interrupts. Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:06:07 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* disable configuration space accesses */
New ISA specific PCI code. Supports shared PCI interrupts. Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:06:07 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
static void
pci_cfgdisable(void)
{
switch (cfgmech) {
case 1:
outl(CONF1_ADDR_PORT, 0);
break;
case 2:
outb(CONF2_ENABLE_PORT, 0);
outb(CONF2_FORWARD_PORT, 0);
break;
}
}
Reviewed by: se Submitted by: wolf (Wolfgang Stanglmeier) New ISA dependend file for PCI bus support. Replaces sys/i386/pci/pcibios.c.
1995-02-01 23:06:58 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* read configuration space register */
Reviewed by: se Submitted by: wolf (Wolfgang Stanglmeier) New ISA dependend file for PCI bus support. Replaces sys/i386/pci/pcibios.c.
1995-02-01 23:06:58 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
int
pci_cfgread(pcicfgregs *cfg, int reg, int bytes)
{
int data = -1;
int port;
Reviewed by: se Submitted by: wolf (Wolfgang Stanglmeier) New ISA dependend file for PCI bus support. Replaces sys/i386/pci/pcibios.c.
1995-02-01 23:06:58 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
port = pci_cfgenable(cfg->bus, cfg->slot, cfg->func, reg, bytes);
Reviewed by: se Submitted by: wolf (Wolfgang Stanglmeier) New ISA dependend file for PCI bus support. Replaces sys/i386/pci/pcibios.c.
1995-02-01 23:06:58 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
if (port != 0) {
switch (bytes) {
case 1:
data = inb(port);
break;
case 2:
data = inw(port);
break;
case 4:
data = inl(port);
break;
}
pci_cfgdisable();
}
return (data);
}
Reviewed by: se Submitted by: wolf (Wolfgang Stanglmeier) New ISA dependend file for PCI bus support. Replaces sys/i386/pci/pcibios.c.
1995-02-01 23:06:58 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* write configuration space register */
Reviewed by: se Submitted by: wolf (Wolfgang Stanglmeier) New ISA dependend file for PCI bus support. Replaces sys/i386/pci/pcibios.c.
1995-02-01 23:06:58 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
void
pci_cfgwrite(pcicfgregs *cfg, int reg, int data, int bytes)
{
int port;
Reviewed by: se Submitted by: wolf (Wolfgang Stanglmeier) New ISA dependend file for PCI bus support. Replaces sys/i386/pci/pcibios.c.
1995-02-01 23:06:58 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
port = pci_cfgenable(cfg->bus, cfg->slot, cfg->func, reg, bytes);
if (port != 0) {
switch (bytes) {
case 1:
outb(port, data);
break;
case 2:
outw(port, data);
break;
case 4:
outl(port, data);
break;
}
pci_cfgdisable();
}
}
Reviewed by: se Submitted by: wolf (Wolfgang Stanglmeier) New ISA dependend file for PCI bus support. Replaces sys/i386/pci/pcibios.c.
1995-02-01 23:06:58 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* check whether the configuration mechanism has been correct identified */
Reviewed by: se Submitted by: wolf (Wolfgang Stanglmeier) New ISA dependend file for PCI bus support. Replaces sys/i386/pci/pcibios.c.
1995-02-01 23:06:58 +00:00
Revert most changes of previous commit. Changes relative to 1.12: - Put extra instruction between outl()/inl() sequence to prevent the old value being read back because of the bus capacitance. - Additional check for existence of register at CONF2_ENABLE_PORT.
1995-09-18 21:48:39 +00:00
static int
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
pci_cfgcheck(int maxdev)
Revert most changes of previous commit. Changes relative to 1.12: - Put extra instruction between outl()/inl() sequence to prevent the old value being read back because of the bus capacitance. - Additional check for existence of register at CONF2_ENABLE_PORT.
1995-09-18 21:48:39 +00:00
{
u_char device;
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
if (bootverbose)
printf("pci_cfgcheck:\tdevice ");
New approach to the PCI bus configuration mechanism probe problem: - try to make sure there is any kind of PCI device - if there is anything at port 0x0cf8, then check for mech. 1 or 2
1995-09-22 19:10:54 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
for (device = 0; device < maxdev; device++) {
unsigned id, class, header;
Fix bad typo: CONF1_ENABLE_RES1 was written CONF1_ENABLE_CHK1 ...
1995-10-09 21:56:24 +00:00
if (bootverbose)
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
printf("%d ", device);
id = inl(pci_cfgenable(0, device, 0, 0, 4));
if (id == 0 || id == -1)
improve pcibus_check: Only assume PCI if at least one PCI to anything bridge on bus 0. This fixes problems with EISA-only systems mistakenly being assumed to support PCI.
1997-03-05 20:52:00 +00:00
continue;
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
class = inl(pci_cfgenable(0, device, 0, 8, 4)) >> 8;
improve pcibus_check: Only assume PCI if at least one PCI to anything bridge on bus 0. This fixes problems with EISA-only systems mistakenly being assumed to support PCI.
1997-03-05 20:52:00 +00:00
if (bootverbose)
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
printf("[class=%06x] ", class);
Make the class code checks in function pci_cfgcheck less strict. It failed to recognize the PCI bus in a system that had only an old chip-set (class code 000000) and a Cyclom multiport serial card on PCI bus 0, but no VGA card or disk or network controller. PR: i386/5300 Submitted by: Nickolay N. Dudorov <nnd@itfs.nsk.su>
1997-12-20 09:04:25 +00:00
if (class == 0 || (class & 0xf870ff) != 0)
improve pcibus_check: Only assume PCI if at least one PCI to anything bridge on bus 0. This fixes problems with EISA-only systems mistakenly being assumed to support PCI.
1997-03-05 20:52:00 +00:00
continue;
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
header = inb(pci_cfgenable(0, device, 0, 14, 1));
improve pcibus_check: Only assume PCI if at least one PCI to anything bridge on bus 0. This fixes problems with EISA-only systems mistakenly being assumed to support PCI.
1997-03-05 20:52:00 +00:00
if (bootverbose)
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
printf("[hdr=%02x] ", header);
if ((header & 0x7e) != 0)
improve pcibus_check: Only assume PCI if at least one PCI to anything bridge on bus 0. This fixes problems with EISA-only systems mistakenly being assumed to support PCI.
1997-03-05 20:52:00 +00:00
continue;
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
if (bootverbose)
printf("is there (id=%08x)\n", id);
pci_cfgdisable();
return (1);
Revert most changes of previous commit. Changes relative to 1.12: - Put extra instruction between outl()/inl() sequence to prevent the old value being read back because of the bus capacitance. - Additional check for existence of register at CONF2_ENABLE_PORT.
1995-09-18 21:48:39 +00:00
}
Fix bad typo: CONF1_ENABLE_RES1 was written CONF1_ENABLE_CHK1 ...
1995-10-09 21:56:24 +00:00
if (bootverbose)
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
printf("-- nothing found\n");
pci_cfgdisable();
return (0);
Revert most changes of previous commit. Changes relative to 1.12: - Put extra instruction between outl()/inl() sequence to prevent the old value being read back because of the bus capacitance. - Additional check for existence of register at CONF2_ENABLE_PORT.
1995-09-18 21:48:39 +00:00
}
Improved verification of configuration space accesses working: Scan for devices instead of assuming that device 0 is present on bus 0 of every PCI motherboard.
1995-09-14 20:27:31 +00:00
Move pcibus (host -> pci bus) probe/attach routines from nexus to pcibus.c. pci_cfgopen() becomes static and there are no more bus #ifdef's in nexus.c.
1999-05-18 20:48:43 +00:00
static int
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
pci_cfgopen(void)
Reviewed by: se Submitted by: wolf (Wolfgang Stanglmeier) New ISA dependend file for PCI bus support. Replaces sys/i386/pci/pcibios.c.
1995-02-01 23:06:58 +00:00
{
Go back to separate tests for configuration mechanism 1 and mechanism 2. Require the state of the configuration enable bits to be OFF assuming that the BIOS left them that way, as it should anyway to avoid bad things to happen. The tests themselves are copied from the previous release, with the exception of CONF1_ENABLE_MSK1 having the LSB set. This bit should be read back as '0', since only DWORD addresses are legal.
1995-10-15 23:43:08 +00:00
unsigned long mode1res,oldval1;
unsigned char mode2res,oldval2;
New approach to the PCI bus configuration mechanism probe problem: - try to make sure there is any kind of PCI device - if there is anything at port 0x0cf8, then check for mech. 1 or 2
1995-09-22 19:10:54 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
oldval1 = inl(CONF1_ADDR_PORT);
New approach to the PCI bus configuration mechanism probe problem: - try to make sure there is any kind of PCI device - if there is anything at port 0x0cf8, then check for mech. 1 or 2
1995-09-22 19:10:54 +00:00
if (bootverbose) {
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
printf("pci_open(1):\tmode 1 addr port (0x0cf8) is 0x%08lx\n",
oldval1);
New approach to the PCI bus configuration mechanism probe problem: - try to make sure there is any kind of PCI device - if there is anything at port 0x0cf8, then check for mech. 1 or 2
1995-09-22 19:10:54 +00:00
}
At least the ASUS Triton motherboards don't disable the PCI bus configuration accesses after the BIOS bus scan. The previous revision made the assumption, that every PCI motherboard did ... Change the test on the initial value of the CONF1_ADDR_PORT register in a way that makes the probe succeed on triton based motherboards, without breaking the EISA motherboard that has some non-PCI register at the same address.
1995-10-17 15:23:14 +00:00
if ((oldval1 & CONF1_ENABLE_MSK) == 0) {
New approach to the PCI bus configuration mechanism probe problem: - try to make sure there is any kind of PCI device - if there is anything at port 0x0cf8, then check for mech. 1 or 2
1995-09-22 19:10:54 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
cfgmech = 1;
devmax = 32;
Reviewed by: se Submitted by: wolf (Wolfgang Stanglmeier) New ISA dependend file for PCI bus support. Replaces sys/i386/pci/pcibios.c.
1995-02-01 23:06:58 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
outl(CONF1_ADDR_PORT, CONF1_ENABLE_CHK);
outb(CONF1_ADDR_PORT +3, 0);
mode1res = inl(CONF1_ADDR_PORT);
outl(CONF1_ADDR_PORT, oldval1);
New approach to the PCI bus configuration mechanism probe problem: - try to make sure there is any kind of PCI device - if there is anything at port 0x0cf8, then check for mech. 1 or 2
1995-09-22 19:10:54 +00:00
Go back to separate tests for configuration mechanism 1 and mechanism 2. Require the state of the configuration enable bits to be OFF assuming that the BIOS left them that way, as it should anyway to avoid bad things to happen. The tests themselves are copied from the previous release, with the exception of CONF1_ENABLE_MSK1 having the LSB set. This bit should be read back as '0', since only DWORD addresses are legal.
1995-10-15 23:43:08 +00:00
if (bootverbose)
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
printf("pci_open(1a):\tmode1res=0x%08lx (0x%08lx)\n",
mode1res, CONF1_ENABLE_CHK);
Reviewed by: se Submitted by: wolf (Wolfgang Stanglmeier) New ISA dependend file for PCI bus support. Replaces sys/i386/pci/pcibios.c.
1995-02-01 23:06:58 +00:00
Go back to separate tests for configuration mechanism 1 and mechanism 2. Require the state of the configuration enable bits to be OFF assuming that the BIOS left them that way, as it should anyway to avoid bad things to happen. The tests themselves are copied from the previous release, with the exception of CONF1_ENABLE_MSK1 having the LSB set. This bit should be read back as '0', since only DWORD addresses are legal.
1995-10-15 23:43:08 +00:00
if (mode1res) {
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
if (pci_cfgcheck(32))
return (cfgmech);
}
New approach to the PCI bus configuration mechanism probe problem: - try to make sure there is any kind of PCI device - if there is anything at port 0x0cf8, then check for mech. 1 or 2
1995-09-22 19:10:54 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
outl(CONF1_ADDR_PORT, CONF1_ENABLE_CHK1);
Go back to separate tests for configuration mechanism 1 and mechanism 2. Require the state of the configuration enable bits to be OFF assuming that the BIOS left them that way, as it should anyway to avoid bad things to happen. The tests themselves are copied from the previous release, with the exception of CONF1_ENABLE_MSK1 having the LSB set. This bit should be read back as '0', since only DWORD addresses are legal.
1995-10-15 23:43:08 +00:00
mode1res = inl(CONF1_ADDR_PORT);
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
outl(CONF1_ADDR_PORT, oldval1);
PCI configuration mechanism now determined by a method, that doesn't fail on new hardware (Compaq Prolinea and Compaq Prosignea), and that doesn't erroneously identify old mech. 2 chip sets as using mech. 1. (See section 3.6.4.1.1 of the PCI bus specs rev. 2.0)
1995-06-28 15:54:57 +00:00
Go back to separate tests for configuration mechanism 1 and mechanism 2. Require the state of the configuration enable bits to be OFF assuming that the BIOS left them that way, as it should anyway to avoid bad things to happen. The tests themselves are copied from the previous release, with the exception of CONF1_ENABLE_MSK1 having the LSB set. This bit should be read back as '0', since only DWORD addresses are legal.
1995-10-15 23:43:08 +00:00
if (bootverbose)
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
printf("pci_open(1b):\tmode1res=0x%08lx (0x%08lx)\n",
mode1res, CONF1_ENABLE_CHK1);
Go back to separate tests for configuration mechanism 1 and mechanism 2. Require the state of the configuration enable bits to be OFF assuming that the BIOS left them that way, as it should anyway to avoid bad things to happen. The tests themselves are copied from the previous release, with the exception of CONF1_ENABLE_MSK1 having the LSB set. This bit should be read back as '0', since only DWORD addresses are legal.
1995-10-15 23:43:08 +00:00
if ((mode1res & CONF1_ENABLE_MSK1) == CONF1_ENABLE_RES1) {
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
if (pci_cfgcheck(32))
return (cfgmech);
}
Go back to separate tests for configuration mechanism 1 and mechanism 2. Require the state of the configuration enable bits to be OFF assuming that the BIOS left them that way, as it should anyway to avoid bad things to happen. The tests themselves are copied from the previous release, with the exception of CONF1_ENABLE_MSK1 having the LSB set. This bit should be read back as '0', since only DWORD addresses are legal.
1995-10-15 23:43:08 +00:00
}
PCI configuration mechanism now determined by a method, that doesn't fail on new hardware (Compaq Prolinea and Compaq Prosignea), and that doesn't erroneously identify old mech. 2 chip sets as using mech. 1. (See section 3.6.4.1.1 of the PCI bus specs rev. 2.0)
1995-06-28 15:54:57 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
oldval2 = inb(CONF2_ENABLE_PORT);
Fix bad typo: CONF1_ENABLE_RES1 was written CONF1_ENABLE_CHK1 ...
1995-10-09 21:56:24 +00:00
Go back to separate tests for configuration mechanism 1 and mechanism 2. Require the state of the configuration enable bits to be OFF assuming that the BIOS left them that way, as it should anyway to avoid bad things to happen. The tests themselves are copied from the previous release, with the exception of CONF1_ENABLE_MSK1 having the LSB set. This bit should be read back as '0', since only DWORD addresses are legal.
1995-10-15 23:43:08 +00:00
if (bootverbose) {
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
printf("pci_open(2):\tmode 2 enable port (0x0cf8) is 0x%02x\n",
oldval2);
Go back to separate tests for configuration mechanism 1 and mechanism 2. Require the state of the configuration enable bits to be OFF assuming that the BIOS left them that way, as it should anyway to avoid bad things to happen. The tests themselves are copied from the previous release, with the exception of CONF1_ENABLE_MSK1 having the LSB set. This bit should be read back as '0', since only DWORD addresses are legal.
1995-10-15 23:43:08 +00:00
}
if ((oldval2 & 0xf0) == 0) {
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
cfgmech = 2;
devmax = 16;
outb(CONF2_ENABLE_PORT, CONF2_ENABLE_CHK);
Go back to separate tests for configuration mechanism 1 and mechanism 2. Require the state of the configuration enable bits to be OFF assuming that the BIOS left them that way, as it should anyway to avoid bad things to happen. The tests themselves are copied from the previous release, with the exception of CONF1_ENABLE_MSK1 having the LSB set. This bit should be read back as '0', since only DWORD addresses are legal.
1995-10-15 23:43:08 +00:00
mode2res = inb(CONF2_ENABLE_PORT);
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
outb(CONF2_ENABLE_PORT, oldval2);
Revert most changes of previous commit. Changes relative to 1.12: - Put extra instruction between outl()/inl() sequence to prevent the old value being read back because of the bus capacitance. - Additional check for existence of register at CONF2_ENABLE_PORT.
1995-09-18 21:48:39 +00:00
Go back to separate tests for configuration mechanism 1 and mechanism 2. Require the state of the configuration enable bits to be OFF assuming that the BIOS left them that way, as it should anyway to avoid bad things to happen. The tests themselves are copied from the previous release, with the exception of CONF1_ENABLE_MSK1 having the LSB set. This bit should be read back as '0', since only DWORD addresses are legal.
1995-10-15 23:43:08 +00:00
if (bootverbose)
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
printf("pci_open(2a):\tmode2res=0x%02x (0x%02x)\n",
mode2res, CONF2_ENABLE_CHK);
Go back to separate tests for configuration mechanism 1 and mechanism 2. Require the state of the configuration enable bits to be OFF assuming that the BIOS left them that way, as it should anyway to avoid bad things to happen. The tests themselves are copied from the previous release, with the exception of CONF1_ENABLE_MSK1 having the LSB set. This bit should be read back as '0', since only DWORD addresses are legal.
1995-10-15 23:43:08 +00:00
if (mode2res == CONF2_ENABLE_RES) {
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
if (bootverbose)
printf("pci_open(2a):\tnow trying mechanism 2\n");
Count PCI irqs in up to 4 ISAish counters named `pci irqnn' instead of in the clk0 counter. Reviewed by: s
1996-03-29 15:01:51 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
if (pci_cfgcheck(16))
return (cfgmech);
Count PCI irqs in up to 4 ISAish counters named `pci irqnn' instead of in the clk0 counter. Reviewed by: s
1996-03-29 15:01:51 +00:00
}
}
Reviewed by: se Submitted by: wolf (Wolfgang Stanglmeier) New ISA dependend file for PCI bus support. Replaces sys/i386/pci/pcibios.c.
1995-02-01 23:06:58 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
cfgmech = 0;
devmax = 0;
return (cfgmech);
Reviewed by: se Submitted by: wolf (Wolfgang Stanglmeier) New ISA dependend file for PCI bus support. Replaces sys/i386/pci/pcibios.c.
1995-02-01 23:06:58 +00:00
}
Move pcibus (host -> pci bus) probe/attach routines from nexus to pcibus.c. pci_cfgopen() becomes static and there are no more bus #ifdef's in nexus.c.
1999-05-18 20:48:43 +00:00
static devclass_t pcib_devclass;
Add support for multiple PCI busses directly connected to the nexus. This is only partially complete, but allows 450NX-based systems with more than one PCI bus to be used again. Submitted by: dfr
1999-07-16 01:00:30 +00:00
static const char *
nexus_pcib_is_host_bridge(pcicfgregs *cfg,
u_int32_t id, u_int8_t class, u_int8_t subclass,
u_int8_t *busnum)
{
Fix nexus_pcib_is_host_bridge() so that it detects my 486's PCI bus correctly. It has the following code: if (class != PCIC_BRIDGE || subclass != PCIS_BRIDGE_HOST) return NULL; My 486 has an Integrated Micro Solutions PCI bridge which identifies itself as subclass PCIS_BRIDGE_OTHER, not PCIS_BRIDGE_HOST. Consequently, it gets ignored. In my opinion, the correct test should be: if ((class != PCIC_BRIDGE) && (subclass != PCIS_BRIDGE_HOST)) return NULL; That way the test still succeeds because the chip's class is PCIC_BRIDGE. Clearly it's not reasonable to expect all host to PCI bridges to always have a subclass of PCIS_BRIDGE_HOST since I've got one that doesn't. This way the sanity test should remain relatively sane while still allowing some oddball yet correct hardware to work. If somebody has a better way to do it, go ahead and tweak the test, but be aware that class == PCIC_BRIDGE and subclass == PCIS_BRIDGE_OTHER is a valid case. While I was here, I also added an explicit ID string for the IMS chipset. I also dealt with a minor style nit: it's bad karma not to have a default case for your switch statements, but the one in this routine doesn't have one. The default string of "Host to PCI bridge" is now assigned in a default case of the switch statement instead of initializing "s" with the string before the switch and then not having any default case.
1999-08-09 21:12:18 +00:00
const char *s = NULL;
Add support for multiple PCI busses directly connected to the nexus. This is only partially complete, but allows 450NX-based systems with more than one PCI bus to be used again. Submitted by: dfr
1999-07-16 01:00:30 +00:00
static u_int8_t pxb[4]; /* hack for 450nx */
*busnum = 0;
switch (id) {
case 0x12258086:
s = "Intel 824?? host to PCI bridge";
/* XXX This is a guess */
*busnum = pci_cfgread(cfg, 0x41, 1);
break;
case 0x71808086:
s = "Intel 82443LX (440 LX) host to PCI bridge";
break;
case 0x71908086:
s = "Intel 82443BX (440 BX) host to PCI bridge";
break;
case 0x71928086:
s = "Intel 82443BX host to PCI bridge (AGP disabled)";
break;
case 0x71a08086:
s = "Intel 82443GX host to PCI bridge";
break;
case 0x71a18086:
s = "Intel 82443GX host to AGP bridge";
break;
case 0x71a28086:
s = "Intel 82443GX host to PCI bridge (AGP disabled)";
break;
case 0x84c48086:
s = "Intel 82454KX/GX (Orion) host to PCI bridge";
*busnum = pci_cfgread(cfg, 0x4a, 1);
break;
case 0x84ca8086:
/*
* For the 450nx chipset, there is a whole bundle of
* things pretending to be host bridges. The MIOC will
* be seen first and isn't really a pci bridge (the
* actual busses are attached to the PXB's). We need to
* read the registers of the MIOC to figure out the
* bus numbers for the PXB channels.
*
* Since the MIOC doesn't have a pci bus attached, we
* pretend it wasn't there.
*/
pxb[0] = pci_cfgread(cfg, 0xd0, 1); /* BUSNO[0] */
pxb[1] = pci_cfgread(cfg, 0xd1, 1) + 1; /* SUBA[0]+1 */
pxb[2] = pci_cfgread(cfg, 0xd3, 1); /* BUSNO[1] */
pxb[3] = pci_cfgread(cfg, 0xd4, 1) + 1; /* SUBA[1]+1 */
return NULL;
case 0x84cb8086:
switch (cfg->slot) {
case 0x12:
s = "Intel 82454NX PXB#0, Bus#A";
*busnum = pxb[0];
break;
case 0x13:
s = "Intel 82454NX PXB#0, Bus#B";
*busnum = pxb[1];
break;
case 0x14:
s = "Intel 82454NX PXB#1, Bus#A";
*busnum = pxb[2];
break;
case 0x15:
s = "Intel 82454NX PXB#1, Bus#B";
*busnum = pxb[3];
break;
}
break;
Add text for the AMD-751 host-to-PCI and PCI-to-PCI (AGP) bridges.
1999-10-25 06:28:04 +00:00
/* AMD -- vendor 0x1022 */
case 0x70061022:
s = "AMD-751 host to PCI bridge";
break;
Add support for multiple PCI busses directly connected to the nexus. This is only partially complete, but allows 450NX-based systems with more than one PCI bus to be used again. Submitted by: dfr
1999-07-16 01:00:30 +00:00
/* SiS -- vendor 0x1039 */
case 0x04961039:
s = "SiS 85c496";
break;
case 0x04061039:
s = "SiS 85c501";
break;
case 0x06011039:
s = "SiS 85c601";
break;
case 0x55911039:
s = "SiS 5591 host to PCI bridge";
break;
case 0x00011039:
s = "SiS 5591 host to AGP bridge";
break;
Don't probe if pci_cfgopen() fails to find pci hardware, like we used to to. This might have caused interesting things on non-PCI hardware if PCI was compiled in.
1999-08-04 13:38:24 +00:00
Add support for multiple PCI busses directly connected to the nexus. This is only partially complete, but allows 450NX-based systems with more than one PCI bus to be used again. Submitted by: dfr
1999-07-16 01:00:30 +00:00
/* VLSI -- vendor 0x1004 */
case 0x00051004:
s = "VLSI 82C592 Host to PCI bridge";
break;
/* XXX Here is MVP3, I got the datasheet but NO M/B to test it */
/* totally. Please let me know if anything wrong. -F */
/* XXX need info on the MVP3 -- any takers? */
case 0x05981106:
s = "VIA 82C598MVP (Apollo MVP3) host bridge";
break;
/* AcerLabs -- vendor 0x10b9 */
/* Funny : The datasheet told me vendor id is "10b8",sub-vendor */
/* id is '10b9" but the register always shows "10b9". -Foxfair */
case 0x154110b9:
s = "AcerLabs M1541 (Aladdin-V) PCI host bridge";
break;
/* OPTi -- vendor 0x1045 */
case 0xc8221045:
s = "OPTi 82C822 host to PCI Bridge";
break;
Hopefully fix the previous commit, it caused *all* bridges to be detected as PCI->HOST bridges on my (440BX) box. My change is to remove the test at the beginning entirely, letting the switch on the device ID happen first. If the device ID is unknown, then (in the default case) check for the generic PCIS_BRIDGE_HOST tag. This should allow wierd cases (eg: wpaul's IMS VL bridge) to work by using the id override. This strategy is more in line with the other PCI match methods we use elsewhere, I only have a limited testbed, but having my USB etc devices detected as PCI->HOST bridges doesn't look good.
1999-08-10 09:22:21 +00:00
/* Ross (?) -- vendor 0x1166 */
Add support for multiple PCI busses directly connected to the nexus. This is only partially complete, but allows 450NX-based systems with more than one PCI bus to be used again. Submitted by: dfr
1999-07-16 01:00:30 +00:00
case 0x00051166:
s = "Ross (?) host to PCI bridge";
/* just guessing the secondary bus register number ... */
Don't use a bogus bus number for Ross host-pci bridges. PR: kern/15278 Submitted by: Ahmed Benani <ahmed_benani@urbanet.ch>
1999-12-05 18:41:34 +00:00
#if 0
Add support for multiple PCI busses directly connected to the nexus. This is only partially complete, but allows 450NX-based systems with more than one PCI bus to be used again. Submitted by: dfr
1999-07-16 01:00:30 +00:00
*busnum = pci_cfgread(cfg, 0x45, 1);
Don't use a bogus bus number for Ross host-pci bridges. PR: kern/15278 Submitted by: Ahmed Benani <ahmed_benani@urbanet.ch>
1999-12-05 18:41:34 +00:00
#endif
Add support for multiple PCI busses directly connected to the nexus. This is only partially complete, but allows 450NX-based systems with more than one PCI bus to be used again. Submitted by: dfr
1999-07-16 01:00:30 +00:00
break;
Hopefully fix the previous commit, it caused *all* bridges to be detected as PCI->HOST bridges on my (440BX) box. My change is to remove the test at the beginning entirely, letting the switch on the device ID happen first. If the device ID is unknown, then (in the default case) check for the generic PCIS_BRIDGE_HOST tag. This should allow wierd cases (eg: wpaul's IMS VL bridge) to work by using the id override. This strategy is more in line with the other PCI match methods we use elsewhere, I only have a limited testbed, but having my USB etc devices detected as PCI->HOST bridges doesn't look good.
1999-08-10 09:22:21 +00:00
/* Integrated Micro Solutions -- vendor 0x10e0 */
Fix nexus_pcib_is_host_bridge() so that it detects my 486's PCI bus correctly. It has the following code: if (class != PCIC_BRIDGE || subclass != PCIS_BRIDGE_HOST) return NULL; My 486 has an Integrated Micro Solutions PCI bridge which identifies itself as subclass PCIS_BRIDGE_OTHER, not PCIS_BRIDGE_HOST. Consequently, it gets ignored. In my opinion, the correct test should be: if ((class != PCIC_BRIDGE) && (subclass != PCIS_BRIDGE_HOST)) return NULL; That way the test still succeeds because the chip's class is PCIC_BRIDGE. Clearly it's not reasonable to expect all host to PCI bridges to always have a subclass of PCIS_BRIDGE_HOST since I've got one that doesn't. This way the sanity test should remain relatively sane while still allowing some oddball yet correct hardware to work. If somebody has a better way to do it, go ahead and tweak the test, but be aware that class == PCIC_BRIDGE and subclass == PCIS_BRIDGE_OTHER is a valid case. While I was here, I also added an explicit ID string for the IMS chipset. I also dealt with a minor style nit: it's bad karma not to have a default case for your switch statements, but the one in this routine doesn't have one. The default string of "Host to PCI bridge" is now assigned in a default case of the switch statement instead of initializing "s" with the string before the switch and then not having any default case.
1999-08-09 21:12:18 +00:00
case 0x884910e0:
s = "Integrated Micro Solutions VL Bridge";
break;
Hopefully fix the previous commit, it caused *all* bridges to be detected as PCI->HOST bridges on my (440BX) box. My change is to remove the test at the beginning entirely, letting the switch on the device ID happen first. If the device ID is unknown, then (in the default case) check for the generic PCIS_BRIDGE_HOST tag. This should allow wierd cases (eg: wpaul's IMS VL bridge) to work by using the id override. This strategy is more in line with the other PCI match methods we use elsewhere, I only have a limited testbed, but having my USB etc devices detected as PCI->HOST bridges doesn't look good.
1999-08-10 09:22:21 +00:00
Fix nexus_pcib_is_host_bridge() so that it detects my 486's PCI bus correctly. It has the following code: if (class != PCIC_BRIDGE || subclass != PCIS_BRIDGE_HOST) return NULL; My 486 has an Integrated Micro Solutions PCI bridge which identifies itself as subclass PCIS_BRIDGE_OTHER, not PCIS_BRIDGE_HOST. Consequently, it gets ignored. In my opinion, the correct test should be: if ((class != PCIC_BRIDGE) && (subclass != PCIS_BRIDGE_HOST)) return NULL; That way the test still succeeds because the chip's class is PCIC_BRIDGE. Clearly it's not reasonable to expect all host to PCI bridges to always have a subclass of PCIS_BRIDGE_HOST since I've got one that doesn't. This way the sanity test should remain relatively sane while still allowing some oddball yet correct hardware to work. If somebody has a better way to do it, go ahead and tweak the test, but be aware that class == PCIC_BRIDGE and subclass == PCIS_BRIDGE_OTHER is a valid case. While I was here, I also added an explicit ID string for the IMS chipset. I also dealt with a minor style nit: it's bad karma not to have a default case for your switch statements, but the one in this routine doesn't have one. The default string of "Host to PCI bridge" is now assigned in a default case of the switch statement instead of initializing "s" with the string before the switch and then not having any default case.
1999-08-09 21:12:18 +00:00
default:
Hopefully fix the previous commit, it caused *all* bridges to be detected as PCI->HOST bridges on my (440BX) box. My change is to remove the test at the beginning entirely, letting the switch on the device ID happen first. If the device ID is unknown, then (in the default case) check for the generic PCIS_BRIDGE_HOST tag. This should allow wierd cases (eg: wpaul's IMS VL bridge) to work by using the id override. This strategy is more in line with the other PCI match methods we use elsewhere, I only have a limited testbed, but having my USB etc devices detected as PCI->HOST bridges doesn't look good.
1999-08-10 09:22:21 +00:00
if (class == PCIC_BRIDGE && subclass == PCIS_BRIDGE_HOST)
s = "Host to PCI bridge";
Fix nexus_pcib_is_host_bridge() so that it detects my 486's PCI bus correctly. It has the following code: if (class != PCIC_BRIDGE || subclass != PCIS_BRIDGE_HOST) return NULL; My 486 has an Integrated Micro Solutions PCI bridge which identifies itself as subclass PCIS_BRIDGE_OTHER, not PCIS_BRIDGE_HOST. Consequently, it gets ignored. In my opinion, the correct test should be: if ((class != PCIC_BRIDGE) && (subclass != PCIS_BRIDGE_HOST)) return NULL; That way the test still succeeds because the chip's class is PCIC_BRIDGE. Clearly it's not reasonable to expect all host to PCI bridges to always have a subclass of PCIS_BRIDGE_HOST since I've got one that doesn't. This way the sanity test should remain relatively sane while still allowing some oddball yet correct hardware to work. If somebody has a better way to do it, go ahead and tweak the test, but be aware that class == PCIC_BRIDGE and subclass == PCIS_BRIDGE_OTHER is a valid case. While I was here, I also added an explicit ID string for the IMS chipset. I also dealt with a minor style nit: it's bad karma not to have a default case for your switch statements, but the one in this routine doesn't have one. The default string of "Host to PCI bridge" is now assigned in a default case of the switch statement instead of initializing "s" with the string before the switch and then not having any default case.
1999-08-09 21:12:18 +00:00
break;
Add support for multiple PCI busses directly connected to the nexus. This is only partially complete, but allows 450NX-based systems with more than one PCI bus to be used again. Submitted by: dfr
1999-07-16 01:00:30 +00:00
}
return s;
}
/*
* Scan the first pci bus for host-pci bridges and add pcib instances
* to the nexus for each bridge.
*/
static void
nexus_pcib_identify(driver_t *driver, device_t parent)
{
pcicfgregs probe;
If we have found pci devices via pci_cfgopen(), but don't find a host->pci bridge specifically, then add a pcib0 device on the motherboard for the pci bus to hang off. Requested by: Anders Andersson <anders@sanyusan.se> Obtained from: dfr
1999-11-18 08:58:37 +00:00
int found = 0;
Add support for multiple PCI busses directly connected to the nexus. This is only partially complete, but allows 450NX-based systems with more than one PCI bus to be used again. Submitted by: dfr
1999-07-16 01:00:30 +00:00
Don't probe if pci_cfgopen() fails to find pci hardware, like we used to to. This might have caused interesting things on non-PCI hardware if PCI was compiled in.
1999-08-04 13:38:24 +00:00
if (pci_cfgopen() == 0)
return;
Add support for multiple PCI busses directly connected to the nexus. This is only partially complete, but allows 450NX-based systems with more than one PCI bus to be used again. Submitted by: dfr
1999-07-16 01:00:30 +00:00
probe.hose = 0;
probe.bus = 0;
for (probe.slot = 0; probe.slot <= PCI_SLOTMAX; probe.slot++) {
int pcifunchigh = 0;
for (probe.func = 0;
probe.func <= pcifunchigh;
probe.func++) {
/*
* Read the IDs and class from the device.
*/
u_int32_t id;
u_int8_t class, subclass, busnum;
device_t child;
const char *s;
id = pci_cfgread(&probe, PCIR_DEVVENDOR, 4);
if (id == -1)
continue;
class = pci_cfgread(&probe, PCIR_CLASS, 1);
subclass = pci_cfgread(&probe, PCIR_SUBCLASS, 1);
s = nexus_pcib_is_host_bridge(&probe, id,
class, subclass,
&busnum);
if (s) {
Make the identify routine add itself with priority 100 to make sure it goes after the npx/apm devices and any other motherboard devices that may get added down the track.
1999-08-22 19:54:11 +00:00
/*
* Add at priority 100 to make sure we
* go after any motherboard resources
*/
child = BUS_ADD_CHILD(parent, 100,
Add support for multiple PCI busses directly connected to the nexus. This is only partially complete, but allows 450NX-based systems with more than one PCI bus to be used again. Submitted by: dfr
1999-07-16 01:00:30 +00:00
"pcib", busnum);
device_set_desc(child, s);
If we have found pci devices via pci_cfgopen(), but don't find a host->pci bridge specifically, then add a pcib0 device on the motherboard for the pci bus to hang off. Requested by: Anders Andersson <anders@sanyusan.se> Obtained from: dfr
1999-11-18 08:58:37 +00:00
found = 1;
Add support for multiple PCI busses directly connected to the nexus. This is only partially complete, but allows 450NX-based systems with more than one PCI bus to be used again. Submitted by: dfr
1999-07-16 01:00:30 +00:00
}
}
}
If we have found pci devices via pci_cfgopen(), but don't find a host->pci bridge specifically, then add a pcib0 device on the motherboard for the pci bus to hang off. Requested by: Anders Andersson <anders@sanyusan.se> Obtained from: dfr
1999-11-18 08:58:37 +00:00
/*
* Make sure we add at least one bridge since some old
* hardware doesn't actually have a host-pci bridge device.
* Note that pci_cfgopen() thinks we have PCI devices..
*/
if (!found) {
if (bootverbose)
printf(
"nexus_pcib_identify: no bridge found, adding pcib0 anyway\n");
BUS_ADD_CHILD(parent, 100, "pcib", 0);
}
Add support for multiple PCI busses directly connected to the nexus. This is only partially complete, but allows 450NX-based systems with more than one PCI bus to be used again. Submitted by: dfr
1999-07-16 01:00:30 +00:00
}
Move pcibus (host -> pci bus) probe/attach routines from nexus to pcibus.c. pci_cfgopen() becomes static and there are no more bus #ifdef's in nexus.c.
1999-05-18 20:48:43 +00:00
static int
nexus_pcib_probe(device_t dev)
{
if (pci_cfgopen() != 0) {
Remove the 'ivars' arguement to device_add_child() and device_add_child_ordered(). 'ivars' may now be set using the device_set_ivars() function. This makes it easier for us to change how arbitrary data structures are associated with a device_t. Eventually we won't be modifying device_t to add additional pointers for ivars, softc data etc. Despite my best efforts I've probably forgotten something so let me know if this breaks anything. I've been running with this change for months and its been quite involved actually isolating all the changes from the rest of the local changes in my tree. Reviewed by: peter, dfr
1999-12-03 08:41:24 +00:00
device_add_child(dev, "pci", device_get_unit(dev));
Move pcibus (host -> pci bus) probe/attach routines from nexus to pcibus.c. pci_cfgopen() becomes static and there are no more bus #ifdef's in nexus.c.
1999-05-18 20:48:43 +00:00
return 0;
}
return ENXIO;
}
static device_method_t nexus_pcib_methods[] = {
/* Device interface */
Add support for multiple PCI busses directly connected to the nexus. This is only partially complete, but allows 450NX-based systems with more than one PCI bus to be used again. Submitted by: dfr
1999-07-16 01:00:30 +00:00
DEVMETHOD(device_identify, nexus_pcib_identify),
Move pcibus (host -> pci bus) probe/attach routines from nexus to pcibus.c. pci_cfgopen() becomes static and there are no more bus #ifdef's in nexus.c.
1999-05-18 20:48:43 +00:00
DEVMETHOD(device_probe, nexus_pcib_probe),
DEVMETHOD(device_attach, bus_generic_attach),
DEVMETHOD(device_shutdown, bus_generic_shutdown),
DEVMETHOD(device_suspend, bus_generic_suspend),
DEVMETHOD(device_resume, bus_generic_resume),
/* Bus interface */
DEVMETHOD(bus_print_child, bus_generic_print_child),
DEVMETHOD(bus_alloc_resource, bus_generic_alloc_resource),
DEVMETHOD(bus_release_resource, bus_generic_release_resource),
DEVMETHOD(bus_activate_resource, bus_generic_activate_resource),
DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource),
DEVMETHOD(bus_setup_intr, bus_generic_setup_intr),
DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr),
{ 0, 0 }
};
static driver_t nexus_pcib_driver = {
"pcib",
nexus_pcib_methods,
1,
};
DRIVER_MODULE(pcib, nexus, nexus_pcib_driver, pcib_devclass, 0, 0);
Reference in New Issue Copy Permalink