d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
c3e9dd893b
freebsd-nq/sys/dev/ixgbe/ixgbe_api.h

180 lines
8.3 KiB
C
Raw Normal View History

This is driver version 1.4.4 of the Intel ixgbe driver. -It has new hardware support -It uses a new method of TX cleanup called Head Write Back -It includes the provisional generic TCP LRO feature contributed by Myricom and made general purpose by me. This should move into the stack upon approval but for this driver drop its in here. -Also bug fixes and etc... MFC in a week if no serious issues arise.
2008-05-16 18:46:30 +00:00
/******************************************************************************
Add the actual source too :) Approved by: re
2007-07-11 23:03:16 +00:00
First, sync to internal shared code, and then Fixes: - flow control - don't override user value on re-init - fix to make 1G optics work correctly - change to interrupt enabling - some bits were incorrect for certain hardware. - certain stats fixes, remove a duplicate increment of ierror, thanks to Scott Long for pointing these out. - shared code link interface changed, requiring some core code changes to accomodate this. - add an m_adj() to ETHER_ALIGN on the recieve side, this was requested by Mike Karels, thanks Mike. - Multicast code corrections also thanks to Mike Karels.
2013-03-04 23:07:40 +00:00
Copyright (c) 2001-2013, Intel Corporation
Add the actual source too :) Approved by: re
2007-07-11 23:03:16 +00:00
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. Neither the name of the Intel Corporation nor the names of its
contributors may be used to endorse or promote products derived from
this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
This is driver version 1.4.4 of the Intel ixgbe driver. -It has new hardware support -It uses a new method of TX cleanup called Head Write Back -It includes the provisional generic TCP LRO feature contributed by Myricom and made general purpose by me. This should move into the stack upon approval but for this driver drop its in here. -Also bug fixes and etc... MFC in a week if no serious issues arise.
2008-05-16 18:46:30 +00:00
******************************************************************************/
/*$FreeBSD$*/
Add the actual source too :) Approved by: re
2007-07-11 23:03:16 +00:00
#ifndef _IXGBE_API_H_
#define _IXGBE_API_H_
#include "ixgbe_type.h"
Add quad port probe support, this gives the admin proper information about the slot (which should be a PCIE Gen 3 slot for this adapter) by looking back thru the PCI parent devices to the slot device. The fix above also corrects the bandwidth display to GT/s rather than the incorrect Gb/s Next, allow the use of ALTQ if you select the compile option IXGBE_LEGACY_TX. Allow the use of 'unsupported' optic modules by a compile option as well. Add a phy reset capability into the stop code, this is so a static configured driver will still behave properly when taken down (not being able to unload it). This revision synchronizes the shared code with Intel internal current code, and note that it now includes DCB supporting code, this was necessitated by some internal changes with the code, but it also will provide the opportunity to develop this feature in the core driver down the road. I have edited the README to get rid of some of the worse anachronisms in it as well, its by no means as robust as I might wish at this point however. Oh, I also have included some conditional stuff in the code so it will be compatible in both the 9.X and 10 environments. Performance has been a focus in recent changes and I believe this revision driver will perform very well in most workloads. MFC after: 2 weeks
2013-06-18 21:28:19 +00:00
void ixgbe_dcb_get_rtrup2tc(struct ixgbe_hw *hw, u8 *map);
Add the actual source too :) Approved by: re
2007-07-11 23:03:16 +00:00
s32 ixgbe_init_shared_code(struct ixgbe_hw *hw);
New hardware support: Intel X540 adapter support added. Some shared code reorganization along with the new adapter. Sync changes to OACTIVE in igb into this driver. Misc small fixes.
2012-01-30 16:42:02 +00:00
extern s32 ixgbe_init_ops_82598(struct ixgbe_hw *hw);
extern s32 ixgbe_init_ops_82599(struct ixgbe_hw *hw);
extern s32 ixgbe_init_ops_X540(struct ixgbe_hw *hw);
extern s32 ixgbe_init_ops_vf(struct ixgbe_hw *hw);
This is an update to the new Intel 10G 82598 driver. The first drop was Beta, this code is expected to be the release version. Note that this driver code will build in either 6.2 or 7. If you use the code in 6.2 you will not get TSO or MSI/X support but it will function in a legacy mode. Approved by: re
2007-09-04 02:31:35 +00:00
s32 ixgbe_set_mac_type(struct ixgbe_hw *hw);
Add the actual source too :) Approved by: re
2007-07-11 23:03:16 +00:00
s32 ixgbe_init_hw(struct ixgbe_hw *hw);
s32 ixgbe_reset_hw(struct ixgbe_hw *hw);
s32 ixgbe_start_hw(struct ixgbe_hw *hw);
Update the driver to Intel version 2.1.6 - add some new hardware support for 82599 - Big change to interrupt architecture, it now uses a queue which contains an RX/TX pair as the recipient of the interrupt. This will reduce overall system interrupts/msix usage. - Improved RX mbuf handling: the old get_buf routine is no longer synchronized with rxeof, this allows the elimination of packet discards due to mbuf allocation failure. - Much simplified and improved AIM code, it now happens in the queue interrupt context and takes into account both the traffic on the RX AND TX side. - variety of small tweaks, like ring size, that have been seen as performance improvements. - Thanks to those that provided feedback or suggested changes, I hope I've caught all of them.
2010-03-27 00:21:40 +00:00
void ixgbe_enable_relaxed_ordering(struct ixgbe_hw *hw);
Add the actual source too :) Approved by: re
2007-07-11 23:03:16 +00:00
s32 ixgbe_clear_hw_cntrs(struct ixgbe_hw *hw);
enum ixgbe_media_type ixgbe_get_media_type(struct ixgbe_hw *hw);
s32 ixgbe_get_mac_addr(struct ixgbe_hw *hw, u8 *mac_addr);
s32 ixgbe_get_bus_info(struct ixgbe_hw *hw);
u32 ixgbe_get_num_of_tx_queues(struct ixgbe_hw *hw);
u32 ixgbe_get_num_of_rx_queues(struct ixgbe_hw *hw);
s32 ixgbe_stop_adapter(struct ixgbe_hw *hw);
This is driver version 1.4.4 of the Intel ixgbe driver. -It has new hardware support -It uses a new method of TX cleanup called Head Write Back -It includes the provisional generic TCP LRO feature contributed by Myricom and made general purpose by me. This should move into the stack upon approval but for this driver drop its in here. -Also bug fixes and etc... MFC in a week if no serious issues arise.
2008-05-16 18:46:30 +00:00
s32 ixgbe_read_pba_num(struct ixgbe_hw *hw, u32 *pba_num);
Update ixgbe driver to verion 2.3.6 - This adds a VM SRIOV interface, ixv, it is however transparent to the user, it links with the ixgbe.ko, but when ixgbe is loaded in a virtualized guest with SRIOV configured this will be detected. - Sync shared code to latest - Many bug fixes and improvements, thanks to everyone who has been using the driver and reporting issues.
2010-11-26 22:46:32 +00:00
s32 ixgbe_read_pba_string(struct ixgbe_hw *hw, u8 *pba_num, u32 pba_num_size);
Add the actual source too :) Approved by: re
2007-07-11 23:03:16 +00:00
s32 ixgbe_identify_phy(struct ixgbe_hw *hw);
s32 ixgbe_reset_phy(struct ixgbe_hw *hw);
s32 ixgbe_read_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
New hardware support: Intel X540 adapter support added. Some shared code reorganization along with the new adapter. Sync changes to OACTIVE in igb into this driver. Misc small fixes.
2012-01-30 16:42:02 +00:00
u16 *phy_data);
Add the actual source too :) Approved by: re
2007-07-11 23:03:16 +00:00
s32 ixgbe_write_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
New hardware support: Intel X540 adapter support added. Some shared code reorganization along with the new adapter. Sync changes to OACTIVE in igb into this driver. Misc small fixes.
2012-01-30 16:42:02 +00:00
u16 phy_data);
Add the actual source too :) Approved by: re
2007-07-11 23:03:16 +00:00
This is driver version 1.4.4 of the Intel ixgbe driver. -It has new hardware support -It uses a new method of TX cleanup called Head Write Back -It includes the provisional generic TCP LRO feature contributed by Myricom and made general purpose by me. This should move into the stack upon approval but for this driver drop its in here. -Also bug fixes and etc... MFC in a week if no serious issues arise.
2008-05-16 18:46:30 +00:00
s32 ixgbe_setup_phy_link(struct ixgbe_hw *hw);
s32 ixgbe_check_phy_link(struct ixgbe_hw *hw,
New hardware support: Intel X540 adapter support added. Some shared code reorganization along with the new adapter. Sync changes to OACTIVE in igb into this driver. Misc small fixes.
2012-01-30 16:42:02 +00:00
ixgbe_link_speed *speed,
bool *link_up);
This is driver version 1.4.4 of the Intel ixgbe driver. -It has new hardware support -It uses a new method of TX cleanup called Head Write Back -It includes the provisional generic TCP LRO feature contributed by Myricom and made general purpose by me. This should move into the stack upon approval but for this driver drop its in here. -Also bug fixes and etc... MFC in a week if no serious issues arise.
2008-05-16 18:46:30 +00:00
s32 ixgbe_setup_phy_link_speed(struct ixgbe_hw *hw,
New hardware support: Intel X540 adapter support added. Some shared code reorganization along with the new adapter. Sync changes to OACTIVE in igb into this driver. Misc small fixes.
2012-01-30 16:42:02 +00:00
ixgbe_link_speed speed,
bool autoneg_wait_to_complete);
Update ixgbe driver to verion 2.3.6 - This adds a VM SRIOV interface, ixv, it is however transparent to the user, it links with the ixgbe.ko, but when ixgbe is loaded in a virtualized guest with SRIOV configured this will be detected. - Sync shared code to latest - Many bug fixes and improvements, thanks to everyone who has been using the driver and reporting issues.
2010-11-26 22:46:32 +00:00
void ixgbe_disable_tx_laser(struct ixgbe_hw *hw);
void ixgbe_enable_tx_laser(struct ixgbe_hw *hw);
void ixgbe_flap_tx_laser(struct ixgbe_hw *hw);
Update driver to Intel version 2.0.7: This adds new feature support for the 82599, a hardware assist to LRO, doing this required a large revamp to the RX cleanup code because the descriptor ring may not be processed out of order, this necessitated the elimination of global pointers. Additionally, the RX routine now does not refresh mbufs on every descriptor, rather it will do a range, and then update the hardware pointer at that time. These are performance oriented changes. The TX side now has a cleaner simpler watchdog algorithm as well, in TX cleanup a read of ticks is stored, that can then be compared in local_timer to determine if there is a hang. Various other cleanups along the way, thanks to all who have provided input and testing.
2009-12-07 21:30:54 +00:00
s32 ixgbe_setup_link(struct ixgbe_hw *hw, ixgbe_link_speed speed,
First, sync to internal shared code, and then Fixes: - flow control - don't override user value on re-init - fix to make 1G optics work correctly - change to interrupt enabling - some bits were incorrect for certain hardware. - certain stats fixes, remove a duplicate increment of ierror, thanks to Scott Long for pointing these out. - shared code link interface changed, requiring some core code changes to accomodate this. - add an m_adj() to ETHER_ALIGN on the recieve side, this was requested by Mike Karels, thanks Mike. - Multicast code corrections also thanks to Mike Karels.
2013-03-04 23:07:40 +00:00
bool autoneg_wait_to_complete);
Add the actual source too :) Approved by: re
2007-07-11 23:03:16 +00:00
s32 ixgbe_check_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
New hardware support: Intel X540 adapter support added. Some shared code reorganization along with the new adapter. Sync changes to OACTIVE in igb into this driver. Misc small fixes.
2012-01-30 16:42:02 +00:00
bool *link_up, bool link_up_wait_to_complete);
This is driver version 1.4.4 of the Intel ixgbe driver. -It has new hardware support -It uses a new method of TX cleanup called Head Write Back -It includes the provisional generic TCP LRO feature contributed by Myricom and made general purpose by me. This should move into the stack upon approval but for this driver drop its in here. -Also bug fixes and etc... MFC in a week if no serious issues arise.
2008-05-16 18:46:30 +00:00
s32 ixgbe_get_link_capabilities(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
New hardware support: Intel X540 adapter support added. Some shared code reorganization along with the new adapter. Sync changes to OACTIVE in igb into this driver. Misc small fixes.
2012-01-30 16:42:02 +00:00
bool *autoneg);
Add the actual source too :) Approved by: re
2007-07-11 23:03:16 +00:00
s32 ixgbe_led_on(struct ixgbe_hw *hw, u32 index);
s32 ixgbe_led_off(struct ixgbe_hw *hw, u32 index);
s32 ixgbe_blink_led_start(struct ixgbe_hw *hw, u32 index);
s32 ixgbe_blink_led_stop(struct ixgbe_hw *hw, u32 index);
s32 ixgbe_init_eeprom_params(struct ixgbe_hw *hw);
s32 ixgbe_write_eeprom(struct ixgbe_hw *hw, u16 offset, u16 data);
New hardware support: Intel X540 adapter support added. Some shared code reorganization along with the new adapter. Sync changes to OACTIVE in igb into this driver. Misc small fixes.
2012-01-30 16:42:02 +00:00
s32 ixgbe_write_eeprom_buffer(struct ixgbe_hw *hw, u16 offset,
u16 words, u16 *data);
Add the actual source too :) Approved by: re
2007-07-11 23:03:16 +00:00
s32 ixgbe_read_eeprom(struct ixgbe_hw *hw, u16 offset, u16 *data);
New hardware support: Intel X540 adapter support added. Some shared code reorganization along with the new adapter. Sync changes to OACTIVE in igb into this driver. Misc small fixes.
2012-01-30 16:42:02 +00:00
s32 ixgbe_read_eeprom_buffer(struct ixgbe_hw *hw, u16 offset,
u16 words, u16 *data);
Add the actual source too :) Approved by: re
2007-07-11 23:03:16 +00:00
s32 ixgbe_validate_eeprom_checksum(struct ixgbe_hw *hw, u16 *checksum_val);
s32 ixgbe_update_eeprom_checksum(struct ixgbe_hw *hw);
Update the ixgbe driver to 1.7.4, this includes support for the new 82599 adapter family, adds header split, and many small fixes. The driver should now be added to the GENERIC kernel. MFC after: 2 weeks
2009-04-10 00:22:48 +00:00
s32 ixgbe_insert_mac_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq);
This is driver version 1.4.4 of the Intel ixgbe driver. -It has new hardware support -It uses a new method of TX cleanup called Head Write Back -It includes the provisional generic TCP LRO feature contributed by Myricom and made general purpose by me. This should move into the stack upon approval but for this driver drop its in here. -Also bug fixes and etc... MFC in a week if no serious issues arise.
2008-05-16 18:46:30 +00:00
s32 ixgbe_set_rar(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
New hardware support: Intel X540 adapter support added. Some shared code reorganization along with the new adapter. Sync changes to OACTIVE in igb into this driver. Misc small fixes.
2012-01-30 16:42:02 +00:00
u32 enable_addr);
This updates the ixgbe driver to Intel internal version 1.4.7 Shared code changes, core driver fixes, vlan event/filter support Also Kip Macy's fix to allow any number of queues, thanks Kip!
2008-07-30 18:15:18 +00:00
s32 ixgbe_clear_rar(struct ixgbe_hw *hw, u32 index);
This is driver version 1.4.4 of the Intel ixgbe driver. -It has new hardware support -It uses a new method of TX cleanup called Head Write Back -It includes the provisional generic TCP LRO feature contributed by Myricom and made general purpose by me. This should move into the stack upon approval but for this driver drop its in here. -Also bug fixes and etc... MFC in a week if no serious issues arise.
2008-05-16 18:46:30 +00:00
s32 ixgbe_set_vmdq(struct ixgbe_hw *hw, u32 rar, u32 vmdq);
Update to the ixgbe driver: - Add a couple of new devices - Flow control changes in shared and core code - Bug fix to Flow Director for 82598 - Shared code sync to internal with required core change Thanks to those helping in the testing and improvements to this driver! MFC after:5 days
2012-07-05 20:51:44 +00:00
s32 ixgbe_set_vmdq_san_mac(struct ixgbe_hw *hw, u32 vmdq);
This updates the ixgbe driver to Intel internal version 1.4.7 Shared code changes, core driver fixes, vlan event/filter support Also Kip Macy's fix to allow any number of queues, thanks Kip!
2008-07-30 18:15:18 +00:00
s32 ixgbe_clear_vmdq(struct ixgbe_hw *hw, u32 rar, u32 vmdq);
Add the actual source too :) Approved by: re
2007-07-11 23:03:16 +00:00
s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw);
u32 ixgbe_get_num_rx_addrs(struct ixgbe_hw *hw);
This is driver version 1.4.4 of the Intel ixgbe driver. -It has new hardware support -It uses a new method of TX cleanup called Head Write Back -It includes the provisional generic TCP LRO feature contributed by Myricom and made general purpose by me. This should move into the stack upon approval but for this driver drop its in here. -Also bug fixes and etc... MFC in a week if no serious issues arise.
2008-05-16 18:46:30 +00:00
s32 ixgbe_update_uc_addr_list(struct ixgbe_hw *hw, u8 *addr_list,
New hardware support: Intel X540 adapter support added. Some shared code reorganization along with the new adapter. Sync changes to OACTIVE in igb into this driver. Misc small fixes.
2012-01-30 16:42:02 +00:00
u32 addr_count, ixgbe_mc_addr_itr func);
Add the actual source too :) Approved by: re
2007-07-11 23:03:16 +00:00
s32 ixgbe_update_mc_addr_list(struct ixgbe_hw *hw, u8 *mc_addr_list,
New hardware support: Intel X540 adapter support added. Some shared code reorganization along with the new adapter. Sync changes to OACTIVE in igb into this driver. Misc small fixes.
2012-01-30 16:42:02 +00:00
u32 mc_addr_count, ixgbe_mc_addr_itr func,
bool clear);
Update driver to Intel version 2.0.7: This adds new feature support for the 82599, a hardware assist to LRO, doing this required a large revamp to the RX cleanup code because the descriptor ring may not be processed out of order, this necessitated the elimination of global pointers. Additionally, the RX routine now does not refresh mbufs on every descriptor, rather it will do a range, and then update the hardware pointer at that time. These are performance oriented changes. The TX side now has a cleaner simpler watchdog algorithm as well, in TX cleanup a read of ticks is stored, that can then be compared in local_timer to determine if there is a hang. Various other cleanups along the way, thanks to all who have provided input and testing.
2009-12-07 21:30:54 +00:00
void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr_list, u32 vmdq);
Add the actual source too :) Approved by: re
2007-07-11 23:03:16 +00:00
s32 ixgbe_enable_mc(struct ixgbe_hw *hw);
s32 ixgbe_disable_mc(struct ixgbe_hw *hw);
s32 ixgbe_clear_vfta(struct ixgbe_hw *hw);
s32 ixgbe_set_vfta(struct ixgbe_hw *hw, u32 vlan,
New hardware support: Intel X540 adapter support added. Some shared code reorganization along with the new adapter. Sync changes to OACTIVE in igb into this driver. Misc small fixes.
2012-01-30 16:42:02 +00:00
u32 vind, bool vlan_on);
s32 ixgbe_set_vlvf(struct ixgbe_hw *hw, u32 vlan, u32 vind,
bool vlan_on, bool *vfta_changed);
Update to the ixgbe driver: - Add a couple of new devices - Flow control changes in shared and core code - Bug fix to Flow Director for 82598 - Shared code sync to internal with required core change Thanks to those helping in the testing and improvements to this driver! MFC after:5 days
2012-07-05 20:51:44 +00:00
s32 ixgbe_fc_enable(struct ixgbe_hw *hw);
New hardware support: Intel X540 adapter support added. Some shared code reorganization along with the new adapter. Sync changes to OACTIVE in igb into this driver. Misc small fixes.
2012-01-30 16:42:02 +00:00
s32 ixgbe_set_fw_drv_ver(struct ixgbe_hw *hw, u8 maj, u8 min, u8 build,
u8 ver);
Add the actual source too :) Approved by: re
2007-07-11 23:03:16 +00:00
void ixgbe_set_mta(struct ixgbe_hw *hw, u8 *mc_addr);
This is driver version 1.4.4 of the Intel ixgbe driver. -It has new hardware support -It uses a new method of TX cleanup called Head Write Back -It includes the provisional generic TCP LRO feature contributed by Myricom and made general purpose by me. This should move into the stack upon approval but for this driver drop its in here. -Also bug fixes and etc... MFC in a week if no serious issues arise.
2008-05-16 18:46:30 +00:00
s32 ixgbe_get_phy_firmware_version(struct ixgbe_hw *hw,
New hardware support: Intel X540 adapter support added. Some shared code reorganization along with the new adapter. Sync changes to OACTIVE in igb into this driver. Misc small fixes.
2012-01-30 16:42:02 +00:00
u16 *firmware_version);
This is an update to the new Intel 10G 82598 driver. The first drop was Beta, this code is expected to be the release version. Note that this driver code will build in either 6.2 or 7. If you use the code in 6.2 you will not get TSO or MSI/X support but it will function in a legacy mode. Approved by: re
2007-09-04 02:31:35 +00:00
s32 ixgbe_read_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 *val);
s32 ixgbe_write_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 val);
This updates the ixgbe driver to Intel internal version 1.4.7 Shared code changes, core driver fixes, vlan event/filter support Also Kip Macy's fix to allow any number of queues, thanks Kip!
2008-07-30 18:15:18 +00:00
s32 ixgbe_init_uta_tables(struct ixgbe_hw *hw);
Updated ixgbe driver - version 1.6.2 -This version has header split, and as a result a number of aspects of the code have been improved/simplified. - Interrupt handling refined for performance - Many small bugs fixed along the way MFC after: ASAP - in time for 7.1
2008-11-26 23:41:18 +00:00
s32 ixgbe_read_i2c_eeprom(struct ixgbe_hw *hw, u8 byte_offset, u8 *eeprom_data);
u32 ixgbe_get_supported_physical_layer(struct ixgbe_hw *hw);
Update the ixgbe driver to 1.7.4, this includes support for the new 82599 adapter family, adds header split, and many small fixes. The driver should now be added to the GENERIC kernel. MFC after: 2 weeks
2009-04-10 00:22:48 +00:00
s32 ixgbe_enable_rx_dma(struct ixgbe_hw *hw, u32 regval);
New hardware support: Intel X540 adapter support added. Some shared code reorganization along with the new adapter. Sync changes to OACTIVE in igb into this driver. Misc small fixes.
2012-01-30 16:42:02 +00:00
s32 ixgbe_disable_sec_rx_path(struct ixgbe_hw *hw);
s32 ixgbe_enable_sec_rx_path(struct ixgbe_hw *hw);
Add quad port probe support, this gives the admin proper information about the slot (which should be a PCIE Gen 3 slot for this adapter) by looking back thru the PCI parent devices to the slot device. The fix above also corrects the bandwidth display to GT/s rather than the incorrect Gb/s Next, allow the use of ALTQ if you select the compile option IXGBE_LEGACY_TX. Allow the use of 'unsupported' optic modules by a compile option as well. Add a phy reset capability into the stop code, this is so a static configured driver will still behave properly when taken down (not being able to unload it). This revision synchronizes the shared code with Intel internal current code, and note that it now includes DCB supporting code, this was necessitated by some internal changes with the code, but it also will provide the opportunity to develop this feature in the core driver down the road. I have edited the README to get rid of some of the worse anachronisms in it as well, its by no means as robust as I might wish at this point however. Oh, I also have included some conditional stuff in the code so it will be compatible in both the 9.X and 10 environments. Performance has been a focus in recent changes and I believe this revision driver will perform very well in most workloads. MFC after: 2 weeks
2013-06-18 21:28:19 +00:00
s32 ixgbe_mng_fw_enabled(struct ixgbe_hw *hw);
Update the ixgbe driver to 1.7.4, this includes support for the new 82599 adapter family, adds header split, and many small fixes. The driver should now be added to the GENERIC kernel. MFC after: 2 weeks
2009-04-10 00:22:48 +00:00
s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw);
New hardware support: Intel X540 adapter support added. Some shared code reorganization along with the new adapter. Sync changes to OACTIVE in igb into this driver. Misc small fixes.
2012-01-30 16:42:02 +00:00
s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 fdirctrl);
s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 fdirctrl);
Update the ixgbe driver to 1.7.4, this includes support for the new 82599 adapter family, adds header split, and many small fixes. The driver should now be added to the GENERIC kernel. MFC after: 2 weeks
2009-04-10 00:22:48 +00:00
s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw,
New hardware support: Intel X540 adapter support added. Some shared code reorganization along with the new adapter. Sync changes to OACTIVE in igb into this driver. Misc small fixes.
2012-01-30 16:42:02 +00:00
union ixgbe_atr_hash_dword input,
Update driver to version 2.3.8: CRITICAL FIX - with stats changes the older 82598 will panic and trash the stack on driver load, FCOE registers ONLY exist in 82599 and must not be read otherwise. kern/153951 - to correct incorrect media type on adapters with pluggable modules I have eliminated the old static table in favor of a new dynamic shared code routine. This also has the benefit of detecting changes when a different module is inserted. Performance/enhancement to the Flow Director code from my linux coworker (the developer of the code). Fixes from Michael Tuexen - a data corruption problem on the 82599 (CRITICAL), fix so the buf size correctly adjusts as the cluster changes, and max descriptors are set properly. Also added 16K clusters for those REALLY big jumbos :) In the RX path, the RX LOCK was not being released, and this causes LOR problems. Add the code that igb already has. Sync with in house shared code, this was necessary for the Flow Director fix. MFC in 2 days
2011-01-19 19:36:27 +00:00
union ixgbe_atr_hash_dword common,
New hardware support: Intel X540 adapter support added. Some shared code reorganization along with the new adapter. Sync changes to OACTIVE in igb into this driver. Misc small fixes.
2012-01-30 16:42:02 +00:00
u8 queue);
s32 ixgbe_fdir_set_input_mask_82599(struct ixgbe_hw *hw,
union ixgbe_atr_input *input_mask);
s32 ixgbe_fdir_write_perfect_filter_82599(struct ixgbe_hw *hw,
union ixgbe_atr_input *input,
u16 soft_id, u8 queue);
s32 ixgbe_fdir_erase_perfect_filter_82599(struct ixgbe_hw *hw,
union ixgbe_atr_input *input,
u16 soft_id);
Update the ixgbe driver to 1.7.4, this includes support for the new 82599 adapter family, adds header split, and many small fixes. The driver should now be added to the GENERIC kernel. MFC after: 2 weeks
2009-04-10 00:22:48 +00:00
s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw,
New hardware support: Intel X540 adapter support added. Some shared code reorganization along with the new adapter. Sync changes to OACTIVE in igb into this driver. Misc small fixes.
2012-01-30 16:42:02 +00:00
union ixgbe_atr_input *input,
union ixgbe_atr_input *mask,
u16 soft_id,
u8 queue);
void ixgbe_atr_compute_perfect_hash_82599(union ixgbe_atr_input *input,
union ixgbe_atr_input *mask);
u32 ixgbe_atr_compute_sig_hash_82599(union ixgbe_atr_hash_dword input,
union ixgbe_atr_hash_dword common);
First, sync to internal shared code, and then Fixes: - flow control - don't override user value on re-init - fix to make 1G optics work correctly - change to interrupt enabling - some bits were incorrect for certain hardware. - certain stats fixes, remove a duplicate increment of ierror, thanks to Scott Long for pointing these out. - shared code link interface changed, requiring some core code changes to accomodate this. - add an m_adj() to ETHER_ALIGN on the recieve side, this was requested by Mike Karels, thanks Mike. - Multicast code corrections also thanks to Mike Karels.
2013-03-04 23:07:40 +00:00
bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw);
Update the ixgbe driver to 1.7.4, this includes support for the new 82599 adapter family, adds header split, and many small fixes. The driver should now be added to the GENERIC kernel. MFC after: 2 weeks
2009-04-10 00:22:48 +00:00
s32 ixgbe_read_i2c_byte(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr,
New hardware support: Intel X540 adapter support added. Some shared code reorganization along with the new adapter. Sync changes to OACTIVE in igb into this driver. Misc small fixes.
2012-01-30 16:42:02 +00:00
u8 *data);
Update the ixgbe driver to 1.7.4, this includes support for the new 82599 adapter family, adds header split, and many small fixes. The driver should now be added to the GENERIC kernel. MFC after: 2 weeks
2009-04-10 00:22:48 +00:00
s32 ixgbe_write_i2c_byte(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr,
New hardware support: Intel X540 adapter support added. Some shared code reorganization along with the new adapter. Sync changes to OACTIVE in igb into this driver. Misc small fixes.
2012-01-30 16:42:02 +00:00
u8 data);
Update the ixgbe driver to 1.7.4, this includes support for the new 82599 adapter family, adds header split, and many small fixes. The driver should now be added to the GENERIC kernel. MFC after: 2 weeks
2009-04-10 00:22:48 +00:00
s32 ixgbe_write_i2c_eeprom(struct ixgbe_hw *hw, u8 byte_offset, u8 eeprom_data);
s32 ixgbe_get_san_mac_addr(struct ixgbe_hw *hw, u8 *san_mac_addr);
s32 ixgbe_set_san_mac_addr(struct ixgbe_hw *hw, u8 *san_mac_addr);
s32 ixgbe_get_device_caps(struct ixgbe_hw *hw, u16 *device_caps);
Update for the Intel 10G driver, this adds support for newest hardware, adds multiqueue tx interface, infrastructure cleanup to allow up to 32 MSIX vectors on newer Nehalem systems. Bug fixes, etc.
2009-06-24 18:27:07 +00:00
s32 ixgbe_acquire_swfw_semaphore(struct ixgbe_hw *hw, u16 mask);
void ixgbe_release_swfw_semaphore(struct ixgbe_hw *hw, u16 mask);
Update driver to Intel version 2.0.7: This adds new feature support for the 82599, a hardware assist to LRO, doing this required a large revamp to the RX cleanup code because the descriptor ring may not be processed out of order, this necessitated the elimination of global pointers. Additionally, the RX routine now does not refresh mbufs on every descriptor, rather it will do a range, and then update the hardware pointer at that time. These are performance oriented changes. The TX side now has a cleaner simpler watchdog algorithm as well, in TX cleanup a read of ticks is stored, that can then be compared in local_timer to determine if there is a hang. Various other cleanups along the way, thanks to all who have provided input and testing.
2009-12-07 21:30:54 +00:00
s32 ixgbe_get_wwn_prefix(struct ixgbe_hw *hw, u16 *wwnn_prefix,
New hardware support: Intel X540 adapter support added. Some shared code reorganization along with the new adapter. Sync changes to OACTIVE in igb into this driver. Misc small fixes.
2012-01-30 16:42:02 +00:00
u16 *wwpn_prefix);
Update ixgbe driver to verion 2.3.6 - This adds a VM SRIOV interface, ixv, it is however transparent to the user, it links with the ixgbe.ko, but when ixgbe is loaded in a virtualized guest with SRIOV configured this will be detected. - Sync shared code to latest - Many bug fixes and improvements, thanks to everyone who has been using the driver and reporting issues.
2010-11-26 22:46:32 +00:00
s32 ixgbe_get_fcoe_boot_status(struct ixgbe_hw *hw, u16 *bs);
Update for the Intel 10G driver, this adds support for newest hardware, adds multiqueue tx interface, infrastructure cleanup to allow up to 32 MSIX vectors on newer Nehalem systems. Bug fixes, etc.
2009-06-24 18:27:07 +00:00
Add the actual source too :) Approved by: re
2007-07-11 23:03:16 +00:00
#endif /* _IXGBE_API_H_ */
Reference in New Issue Copy Permalink