freebsd-nq/sbin/fsck_ffs/pass5.c

624 lines
18 KiB
C
Raw Normal View History

/*-
* SPDX-License-Identifier: BSD-3-Clause
*
* Copyright (c) 1980, 1986, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#if 0
#ifndef lint
static const char sccsid[] = "@(#)pass5.c 8.9 (Berkeley) 4/28/95";
#endif /* not lint */
#endif
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/sysctl.h>
#include <ufs/ufs/dinode.h>
#include <ufs/ffs/fs.h>
#include <err.h>
#include <inttypes.h>
#include <limits.h>
#include <string.h>
#include <libufs.h>
#include "fsck.h"
static void check_maps(u_char *, u_char *, int, ufs2_daddr_t, const char *,
int *, int, int, int);
static void clear_blocks(ufs2_daddr_t start, ufs2_daddr_t end);
void
pass5(void)
{
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
int c, i, j, blk, frags, basesize, mapsize;
int inomapsize, blkmapsize;
struct fs *fs = &sblock;
ufs2_daddr_t d, dbase, dmax, start;
The goal of this change is to prevent accidental foot shooting by folks running filesystems created on check-hash enabled kernels (which I will call "new") on a non-check-hash enabled kernels (which I will call "old). The idea here is to detect when a filesystem is run on an old kernel and flag the filesystem so that when it gets moved back to a new kernel, it will not start getting a slew of check-hash errors. Back when the UFS version 2 filesystem was created, it added a file flag FS_INDEXDIRS that was to be set on any filesystem that kept some sort of on-disk indexing for directories. The idea was precisely to solve the issue we have today. Specifically that a newer kernel that supported indexing would be able to tell that the filesystem had been run on an older non-indexing kernel and that the indexes should not be used until they had been rebuilt. Since we have never implemented on-disk directory indicies, the FS_INDEXDIRS flag is cleared every time any UFS version 2 filesystem ever created is mounted for writing. This commit repurposes the FS_INDEXDIRS flag as the FS_METACKHASH flag. Thus, the FS_METACKHASH is definitively known to have always been cleared. The FS_INDEXDIRS flag has been moved to a new block of flags that will always be cleared starting with this commit (until they get used to implement some future feature which needs to detect that the filesystem was mounted on a kernel that predates the new feature). If a filesystem with check-hashes enabled is mounted on an old kernel the FS_METACKHASH flag is cleared. When that filesystem is mounted on a new kernel it will see that the FS_METACKHASH has been cleared and clears all of the fs_metackhash flags. To get them re-enabled the user must run fsck (in interactive mode without the -y flag) which will ask for each supported check hash whether it should be rebuilt and enabled. When fsck is run in its default preen mode, it will just ignore the check hashes so they will remain disabled. The kernel has always disabled any check hash functions that it does not support, so as more types of check hashes are added, we will get a non-surprising result. Specifically if filesystems get moved to kernels supporting fewer of the check hashes, those that are not supported will be disabled. If the filesystem is moved back to a kernel with more of the check-hashes available and fsck is run interactively to rebuild them, then their checking will resume. Otherwise just the smaller subset will be checked. A side effect of this commit is that filesystems running with cylinder-group check hashes will stop having them checked until fsck is run to re-enable them (since none of them currently have the FS_METACKHASH flag set). So, if you want check hashes enabled on your filesystems after booting a kernel with these changes, you need to run fsck to enable them. Any newly created filesystems will have check hashes enabled. If in doubt as to whether you have check hashes emabled, run dumpfs and look at the list of enabled flags at the end of the superblock details.
2018-02-08 23:06:58 +00:00
int rewritecg = 0;
struct csum *cs;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
struct csum_total cstotal;
struct inodesc idesc[3];
char buf[MAXBSIZE];
struct cg *cg, *newcg = (struct cg *)buf;
struct bufarea *cgbp;
inoinfo(UFS_WINO)->ino_state = USTATE;
memset(newcg, 0, (size_t)fs->fs_cgsize);
newcg->cg_niblk = fs->fs_ipg;
The goal of this change is to prevent accidental foot shooting by folks running filesystems created on check-hash enabled kernels (which I will call "new") on a non-check-hash enabled kernels (which I will call "old). The idea here is to detect when a filesystem is run on an old kernel and flag the filesystem so that when it gets moved back to a new kernel, it will not start getting a slew of check-hash errors. Back when the UFS version 2 filesystem was created, it added a file flag FS_INDEXDIRS that was to be set on any filesystem that kept some sort of on-disk indexing for directories. The idea was precisely to solve the issue we have today. Specifically that a newer kernel that supported indexing would be able to tell that the filesystem had been run on an older non-indexing kernel and that the indexes should not be used until they had been rebuilt. Since we have never implemented on-disk directory indicies, the FS_INDEXDIRS flag is cleared every time any UFS version 2 filesystem ever created is mounted for writing. This commit repurposes the FS_INDEXDIRS flag as the FS_METACKHASH flag. Thus, the FS_METACKHASH is definitively known to have always been cleared. The FS_INDEXDIRS flag has been moved to a new block of flags that will always be cleared starting with this commit (until they get used to implement some future feature which needs to detect that the filesystem was mounted on a kernel that predates the new feature). If a filesystem with check-hashes enabled is mounted on an old kernel the FS_METACKHASH flag is cleared. When that filesystem is mounted on a new kernel it will see that the FS_METACKHASH has been cleared and clears all of the fs_metackhash flags. To get them re-enabled the user must run fsck (in interactive mode without the -y flag) which will ask for each supported check hash whether it should be rebuilt and enabled. When fsck is run in its default preen mode, it will just ignore the check hashes so they will remain disabled. The kernel has always disabled any check hash functions that it does not support, so as more types of check hashes are added, we will get a non-surprising result. Specifically if filesystems get moved to kernels supporting fewer of the check hashes, those that are not supported will be disabled. If the filesystem is moved back to a kernel with more of the check-hashes available and fsck is run interactively to rebuild them, then their checking will resume. Otherwise just the smaller subset will be checked. A side effect of this commit is that filesystems running with cylinder-group check hashes will stop having them checked until fsck is run to re-enable them (since none of them currently have the FS_METACKHASH flag set). So, if you want check hashes enabled on your filesystems after booting a kernel with these changes, you need to run fsck to enable them. Any newly created filesystems will have check hashes enabled. If in doubt as to whether you have check hashes emabled, run dumpfs and look at the list of enabled flags at the end of the superblock details.
2018-02-08 23:06:58 +00:00
/* check to see if we are to add a cylinder group check hash */
if ((ckhashadd & CK_CYLGRP) != 0)
Continuing efforts to provide hardening of FFS, this change adds a check hash to cylinder groups. If a check hash fails when a cylinder group is read, no further allocations are attempted in that cylinder group until it has been fixed by fsck. This avoids a class of filesystem panics related to corrupted cylinder group maps. The hash is done using crc32c. Check hases are added only to UFS2 and not to UFS1 as UFS1 is primarily used in embedded systems with small memories and low-powered processors which need as light-weight a filesystem as possible. Specifics of the changes: sys/sys/buf.h: Add BX_FSPRIV to reserve a set of eight b_xflags that may be used by individual filesystems for their own purpose. Their specific definitions are found in the header files for each filesystem that uses them. Also add fields to struct buf as noted below. sys/kern/vfs_bio.c: It is only necessary to compute a check hash for a cylinder group when it is actually read from disk. When calling bread, you do not know whether the buffer was found in the cache or read. So a new flag (GB_CKHASH) and a pointer to a function to perform the hash has been added to breadn_flags to say that the function should be called to calculate a hash if the data has been read. The check hash is placed in b_ckhash and the B_CKHASH flag is set to indicate that a read was done and a check hash calculated. Though a rather elaborate mechanism, it should also work for check hashing other metadata in the future. A kernel internal API change was to change breada into a static fucntion and add flags and a function pointer to a check-hash function. sys/ufs/ffs/fs.h: Add flags for types of check hashes; stored in a new word in the superblock. Define corresponding BX_ flags for the different types of check hashes. Add a check hash word in the cylinder group. sys/ufs/ffs/ffs_alloc.c: In ffs_getcg do the dance with breadn_flags to get a check hash and if one is provided, check it. sys/ufs/ffs/ffs_vfsops.c: Copy across the BX_FFSTYPES flags in background writes. Update the check hash when writing out buffers that need them. sys/ufs/ffs/ffs_snapshot.c: Recompute check hash when updating snapshot cylinder groups. sys/libkern/crc32.c: lib/libufs/Makefile: lib/libufs/libufs.h: lib/libufs/cgroup.c: Include libkern/crc32.c in libufs and use it to compute check hashes when updating cylinder groups. Four utilities are affected: sbin/newfs/mkfs.c: Add the check hashes when building the cylinder groups. sbin/fsck_ffs/fsck.h: sbin/fsck_ffs/fsutil.c: Verify and update check hashes when checking and writing cylinder groups. sbin/fsck_ffs/pass5.c: Offer to add check hashes to existing filesystems. Precompute check hashes when rebuilding cylinder group (although this will be done when it is written in fsutil.c it is necessary to do it early before comparing with the old cylinder group) sbin/dumpfs/dumpfs.c Print out the new check hash flag(s) sbin/fsdb/Makefile: Needs to add libufs now used by pass5.c imported from fsck_ffs. Reviewed by: kib Tested by: Peter Holm (pho)
2017-09-22 12:45:15 +00:00
rewritecg = 1;
if (cvtlevel >= 3) {
if (fs->fs_maxcontig < 2 && fs->fs_contigsumsize > 0) {
if (preen)
pwarn("DELETING CLUSTERING MAPS\n");
if (preen || reply("DELETE CLUSTERING MAPS")) {
fs->fs_contigsumsize = 0;
rewritecg = 1;
sbdirty();
}
}
if (fs->fs_maxcontig > 1) {
const char *doit = NULL;
if (fs->fs_contigsumsize < 1) {
doit = "CREAT";
} else if (fs->fs_contigsumsize < fs->fs_maxcontig &&
fs->fs_contigsumsize < FS_MAXCONTIG) {
doit = "EXPAND";
}
if (doit) {
i = fs->fs_contigsumsize;
fs->fs_contigsumsize =
MIN(fs->fs_maxcontig, FS_MAXCONTIG);
if (CGSIZE(fs) > (u_int)fs->fs_bsize) {
pwarn("CANNOT %s CLUSTER MAPS\n", doit);
fs->fs_contigsumsize = i;
} else if (preen ||
reply("CREATE CLUSTER MAPS")) {
if (preen)
pwarn("%sING CLUSTER MAPS\n",
doit);
fs->fs_cgsize =
fragroundup(fs, CGSIZE(fs));
rewritecg = 1;
sbdirty();
}
}
}
}
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
basesize = &newcg->cg_space[0] - (u_char *)(&newcg->cg_firstfield);
if (sblock.fs_magic == FS_UFS2_MAGIC) {
newcg->cg_iusedoff = basesize;
} else {
/*
* We reserve the space for the old rotation summary
* tables for the benefit of old kernels, but do not
* maintain them in modern kernels. In time, they can
* go away.
*/
newcg->cg_old_btotoff = basesize;
newcg->cg_old_boff = newcg->cg_old_btotoff +
fs->fs_old_cpg * sizeof(int32_t);
newcg->cg_iusedoff = newcg->cg_old_boff +
fs->fs_old_cpg * fs->fs_old_nrpos * sizeof(u_int16_t);
memset(&newcg->cg_space[0], 0, newcg->cg_iusedoff - basesize);
}
inomapsize = howmany(fs->fs_ipg, CHAR_BIT);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
newcg->cg_freeoff = newcg->cg_iusedoff + inomapsize;
blkmapsize = howmany(fs->fs_fpg, CHAR_BIT);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
newcg->cg_nextfreeoff = newcg->cg_freeoff + blkmapsize;
if (fs->fs_contigsumsize > 0) {
newcg->cg_clustersumoff = newcg->cg_nextfreeoff -
sizeof(u_int32_t);
newcg->cg_clustersumoff =
roundup(newcg->cg_clustersumoff, sizeof(u_int32_t));
newcg->cg_clusteroff = newcg->cg_clustersumoff +
(fs->fs_contigsumsize + 1) * sizeof(u_int32_t);
newcg->cg_nextfreeoff = newcg->cg_clusteroff +
howmany(fragstoblks(fs, fs->fs_fpg), CHAR_BIT);
}
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
newcg->cg_magic = CG_MAGIC;
mapsize = newcg->cg_nextfreeoff - newcg->cg_iusedoff;
memset(&idesc[0], 0, sizeof idesc);
for (i = 0; i < 3; i++)
idesc[i].id_type = ADDR;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
memset(&cstotal, 0, sizeof(struct csum_total));
dmax = blknum(fs, fs->fs_size + fs->fs_frag - 1);
for (d = fs->fs_size; d < dmax; d++)
setbmap(d);
for (c = 0; c < fs->fs_ncg; c++) {
if (got_siginfo) {
printf("%s: phase 5: cyl group %d of %d (%d%%)\n",
cdevname, c, sblock.fs_ncg,
c * 100 / sblock.fs_ncg);
got_siginfo = 0;
}
if (got_sigalarm) {
setproctitle("%s p5 %d%%", cdevname,
c * 100 / sblock.fs_ncg);
got_sigalarm = 0;
}
cgbp = cglookup(c);
cg = cgbp->b_un.b_cg;
if (!cg_chkmagic(cg))
pfatal("CG %d: BAD MAGIC NUMBER\n", c);
The goal of this change is to prevent accidental foot shooting by folks running filesystems created on check-hash enabled kernels (which I will call "new") on a non-check-hash enabled kernels (which I will call "old). The idea here is to detect when a filesystem is run on an old kernel and flag the filesystem so that when it gets moved back to a new kernel, it will not start getting a slew of check-hash errors. Back when the UFS version 2 filesystem was created, it added a file flag FS_INDEXDIRS that was to be set on any filesystem that kept some sort of on-disk indexing for directories. The idea was precisely to solve the issue we have today. Specifically that a newer kernel that supported indexing would be able to tell that the filesystem had been run on an older non-indexing kernel and that the indexes should not be used until they had been rebuilt. Since we have never implemented on-disk directory indicies, the FS_INDEXDIRS flag is cleared every time any UFS version 2 filesystem ever created is mounted for writing. This commit repurposes the FS_INDEXDIRS flag as the FS_METACKHASH flag. Thus, the FS_METACKHASH is definitively known to have always been cleared. The FS_INDEXDIRS flag has been moved to a new block of flags that will always be cleared starting with this commit (until they get used to implement some future feature which needs to detect that the filesystem was mounted on a kernel that predates the new feature). If a filesystem with check-hashes enabled is mounted on an old kernel the FS_METACKHASH flag is cleared. When that filesystem is mounted on a new kernel it will see that the FS_METACKHASH has been cleared and clears all of the fs_metackhash flags. To get them re-enabled the user must run fsck (in interactive mode without the -y flag) which will ask for each supported check hash whether it should be rebuilt and enabled. When fsck is run in its default preen mode, it will just ignore the check hashes so they will remain disabled. The kernel has always disabled any check hash functions that it does not support, so as more types of check hashes are added, we will get a non-surprising result. Specifically if filesystems get moved to kernels supporting fewer of the check hashes, those that are not supported will be disabled. If the filesystem is moved back to a kernel with more of the check-hashes available and fsck is run interactively to rebuild them, then their checking will resume. Otherwise just the smaller subset will be checked. A side effect of this commit is that filesystems running with cylinder-group check hashes will stop having them checked until fsck is run to re-enable them (since none of them currently have the FS_METACKHASH flag set). So, if you want check hashes enabled on your filesystems after booting a kernel with these changes, you need to run fsck to enable them. Any newly created filesystems will have check hashes enabled. If in doubt as to whether you have check hashes emabled, run dumpfs and look at the list of enabled flags at the end of the superblock details.
2018-02-08 23:06:58 +00:00
/*
* If we have a cylinder group check hash and are not adding
* it for the first time, verify that it is good.
*/
if ((fs->fs_metackhash & CK_CYLGRP) != 0 &&
(ckhashadd & CK_CYLGRP) == 0) {
uint32_t ckhash, thishash;
ckhash = cg->cg_ckhash;
cg->cg_ckhash = 0;
thishash = calculate_crc32c(~0L, cg, fs->fs_cgsize);
if (ckhash == thishash) {
cg->cg_ckhash = ckhash;
} else {
pwarn("CG %d: BAD CHECK-HASH %#x vs %#x\n",
The goal of this change is to prevent accidental foot shooting by folks running filesystems created on check-hash enabled kernels (which I will call "new") on a non-check-hash enabled kernels (which I will call "old). The idea here is to detect when a filesystem is run on an old kernel and flag the filesystem so that when it gets moved back to a new kernel, it will not start getting a slew of check-hash errors. Back when the UFS version 2 filesystem was created, it added a file flag FS_INDEXDIRS that was to be set on any filesystem that kept some sort of on-disk indexing for directories. The idea was precisely to solve the issue we have today. Specifically that a newer kernel that supported indexing would be able to tell that the filesystem had been run on an older non-indexing kernel and that the indexes should not be used until they had been rebuilt. Since we have never implemented on-disk directory indicies, the FS_INDEXDIRS flag is cleared every time any UFS version 2 filesystem ever created is mounted for writing. This commit repurposes the FS_INDEXDIRS flag as the FS_METACKHASH flag. Thus, the FS_METACKHASH is definitively known to have always been cleared. The FS_INDEXDIRS flag has been moved to a new block of flags that will always be cleared starting with this commit (until they get used to implement some future feature which needs to detect that the filesystem was mounted on a kernel that predates the new feature). If a filesystem with check-hashes enabled is mounted on an old kernel the FS_METACKHASH flag is cleared. When that filesystem is mounted on a new kernel it will see that the FS_METACKHASH has been cleared and clears all of the fs_metackhash flags. To get them re-enabled the user must run fsck (in interactive mode without the -y flag) which will ask for each supported check hash whether it should be rebuilt and enabled. When fsck is run in its default preen mode, it will just ignore the check hashes so they will remain disabled. The kernel has always disabled any check hash functions that it does not support, so as more types of check hashes are added, we will get a non-surprising result. Specifically if filesystems get moved to kernels supporting fewer of the check hashes, those that are not supported will be disabled. If the filesystem is moved back to a kernel with more of the check-hashes available and fsck is run interactively to rebuild them, then their checking will resume. Otherwise just the smaller subset will be checked. A side effect of this commit is that filesystems running with cylinder-group check hashes will stop having them checked until fsck is run to re-enable them (since none of them currently have the FS_METACKHASH flag set). So, if you want check hashes enabled on your filesystems after booting a kernel with these changes, you need to run fsck to enable them. Any newly created filesystems will have check hashes enabled. If in doubt as to whether you have check hashes emabled, run dumpfs and look at the list of enabled flags at the end of the superblock details.
2018-02-08 23:06:58 +00:00
c, ckhash, thishash);
cg->cg_ckhash = thishash;
cgdirty(cgbp);
}
}
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
newcg->cg_time = cg->cg_time;
newcg->cg_old_time = cg->cg_old_time;
newcg->cg_unrefs = cg->cg_unrefs;
newcg->cg_ckhash = cg->cg_ckhash;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
newcg->cg_cgx = c;
dbase = cgbase(fs, c);
dmax = dbase + fs->fs_fpg;
if (dmax > fs->fs_size)
dmax = fs->fs_size;
newcg->cg_ndblk = dmax - dbase;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (fs->fs_magic == FS_UFS1_MAGIC) {
if (c == fs->fs_ncg - 1)
newcg->cg_old_ncyl = howmany(newcg->cg_ndblk,
fs->fs_fpg / fs->fs_old_cpg);
else
newcg->cg_old_ncyl = fs->fs_old_cpg;
newcg->cg_old_niblk = fs->fs_ipg;
newcg->cg_niblk = 0;
}
if (fs->fs_contigsumsize > 0)
newcg->cg_nclusterblks = newcg->cg_ndblk / fs->fs_frag;
newcg->cg_cs.cs_ndir = 0;
newcg->cg_cs.cs_nffree = 0;
newcg->cg_cs.cs_nbfree = 0;
newcg->cg_cs.cs_nifree = fs->fs_ipg;
if (cg->cg_rotor >= 0 && cg->cg_rotor < newcg->cg_ndblk)
newcg->cg_rotor = cg->cg_rotor;
else
newcg->cg_rotor = 0;
if (cg->cg_frotor >= 0 && cg->cg_frotor < newcg->cg_ndblk)
newcg->cg_frotor = cg->cg_frotor;
else
newcg->cg_frotor = 0;
if (cg->cg_irotor >= 0 && cg->cg_irotor < fs->fs_ipg)
newcg->cg_irotor = cg->cg_irotor;
else
newcg->cg_irotor = 0;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (fs->fs_magic == FS_UFS1_MAGIC) {
newcg->cg_initediblk = 0;
} else {
if ((unsigned)cg->cg_initediblk > fs->fs_ipg)
newcg->cg_initediblk = fs->fs_ipg;
else
newcg->cg_initediblk = cg->cg_initediblk;
}
memset(&newcg->cg_frsum[0], 0, sizeof newcg->cg_frsum);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
memset(cg_inosused(newcg), 0, (size_t)(mapsize));
j = fs->fs_ipg * c;
for (i = 0; i < inostathead[c].il_numalloced; j++, i++) {
switch (inoinfo(j)->ino_state) {
case USTATE:
break;
case DSTATE:
case DCLEAR:
case DFOUND:
case DZLINK:
newcg->cg_cs.cs_ndir++;
/* FALLTHROUGH */
case FSTATE:
case FCLEAR:
case FZLINK:
newcg->cg_cs.cs_nifree--;
setbit(cg_inosused(newcg), i);
break;
default:
if (j < (int)UFS_ROOTINO)
break;
errx(EEXIT, "BAD STATE %d FOR INODE I=%d",
inoinfo(j)->ino_state, j);
}
}
if (c == 0)
for (i = 0; i < (int)UFS_ROOTINO; i++) {
setbit(cg_inosused(newcg), i);
newcg->cg_cs.cs_nifree--;
}
start = -1;
for (i = 0, d = dbase;
d < dmax;
d += fs->fs_frag, i += fs->fs_frag) {
frags = 0;
for (j = 0; j < fs->fs_frag; j++) {
if (testbmap(d + j)) {
if ((Eflag || Zflag) && start != -1) {
clear_blocks(start, d + j - 1);
start = -1;
}
continue;
}
if (start == -1)
start = d + j;
setbit(cg_blksfree(newcg), i + j);
frags++;
}
if (frags == fs->fs_frag) {
newcg->cg_cs.cs_nbfree++;
if (fs->fs_contigsumsize > 0)
setbit(cg_clustersfree(newcg),
i / fs->fs_frag);
} else if (frags > 0) {
newcg->cg_cs.cs_nffree += frags;
blk = blkmap(fs, cg_blksfree(newcg), i);
ffs_fragacct(fs, blk, newcg->cg_frsum, 1);
}
}
if ((Eflag || Zflag) && start != -1)
clear_blocks(start, d - 1);
if (fs->fs_contigsumsize > 0) {
int32_t *sump = cg_clustersum(newcg);
u_char *mapp = cg_clustersfree(newcg);
int map = *mapp++;
int bit = 1;
int run = 0;
for (i = 0; i < newcg->cg_nclusterblks; i++) {
if ((map & bit) != 0) {
run++;
} else if (run != 0) {
if (run > fs->fs_contigsumsize)
run = fs->fs_contigsumsize;
sump[run]++;
run = 0;
}
if ((i & (CHAR_BIT - 1)) != (CHAR_BIT - 1)) {
bit <<= 1;
} else {
map = *mapp++;
bit = 1;
}
}
if (run != 0) {
if (run > fs->fs_contigsumsize)
run = fs->fs_contigsumsize;
sump[run]++;
}
}
Continuing efforts to provide hardening of FFS, this change adds a check hash to cylinder groups. If a check hash fails when a cylinder group is read, no further allocations are attempted in that cylinder group until it has been fixed by fsck. This avoids a class of filesystem panics related to corrupted cylinder group maps. The hash is done using crc32c. Check hases are added only to UFS2 and not to UFS1 as UFS1 is primarily used in embedded systems with small memories and low-powered processors which need as light-weight a filesystem as possible. Specifics of the changes: sys/sys/buf.h: Add BX_FSPRIV to reserve a set of eight b_xflags that may be used by individual filesystems for their own purpose. Their specific definitions are found in the header files for each filesystem that uses them. Also add fields to struct buf as noted below. sys/kern/vfs_bio.c: It is only necessary to compute a check hash for a cylinder group when it is actually read from disk. When calling bread, you do not know whether the buffer was found in the cache or read. So a new flag (GB_CKHASH) and a pointer to a function to perform the hash has been added to breadn_flags to say that the function should be called to calculate a hash if the data has been read. The check hash is placed in b_ckhash and the B_CKHASH flag is set to indicate that a read was done and a check hash calculated. Though a rather elaborate mechanism, it should also work for check hashing other metadata in the future. A kernel internal API change was to change breada into a static fucntion and add flags and a function pointer to a check-hash function. sys/ufs/ffs/fs.h: Add flags for types of check hashes; stored in a new word in the superblock. Define corresponding BX_ flags for the different types of check hashes. Add a check hash word in the cylinder group. sys/ufs/ffs/ffs_alloc.c: In ffs_getcg do the dance with breadn_flags to get a check hash and if one is provided, check it. sys/ufs/ffs/ffs_vfsops.c: Copy across the BX_FFSTYPES flags in background writes. Update the check hash when writing out buffers that need them. sys/ufs/ffs/ffs_snapshot.c: Recompute check hash when updating snapshot cylinder groups. sys/libkern/crc32.c: lib/libufs/Makefile: lib/libufs/libufs.h: lib/libufs/cgroup.c: Include libkern/crc32.c in libufs and use it to compute check hashes when updating cylinder groups. Four utilities are affected: sbin/newfs/mkfs.c: Add the check hashes when building the cylinder groups. sbin/fsck_ffs/fsck.h: sbin/fsck_ffs/fsutil.c: Verify and update check hashes when checking and writing cylinder groups. sbin/fsck_ffs/pass5.c: Offer to add check hashes to existing filesystems. Precompute check hashes when rebuilding cylinder group (although this will be done when it is written in fsutil.c it is necessary to do it early before comparing with the old cylinder group) sbin/dumpfs/dumpfs.c Print out the new check hash flag(s) sbin/fsdb/Makefile: Needs to add libufs now used by pass5.c imported from fsck_ffs. Reviewed by: kib Tested by: Peter Holm (pho)
2017-09-22 12:45:15 +00:00
if (bkgrdflag != 0) {
cstotal.cs_nffree += cg->cg_cs.cs_nffree;
cstotal.cs_nbfree += cg->cg_cs.cs_nbfree;
cstotal.cs_nifree += cg->cg_cs.cs_nifree;
cstotal.cs_ndir += cg->cg_cs.cs_ndir;
} else {
cstotal.cs_nffree += newcg->cg_cs.cs_nffree;
cstotal.cs_nbfree += newcg->cg_cs.cs_nbfree;
cstotal.cs_nifree += newcg->cg_cs.cs_nifree;
cstotal.cs_ndir += newcg->cg_cs.cs_ndir;
}
cs = &fs->fs_cs(fs, c);
if (cursnapshot == 0 &&
memcmp(&newcg->cg_cs, cs, sizeof *cs) != 0 &&
dofix(&idesc[0], "FREE BLK COUNT(S) WRONG IN SUPERBLK")) {
memmove(cs, &newcg->cg_cs, sizeof *cs);
sbdirty();
}
if (rewritecg) {
memmove(cg, newcg, (size_t)fs->fs_cgsize);
cgdirty(cgbp);
continue;
}
if (cursnapshot == 0 &&
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
memcmp(newcg, cg, basesize) != 0 &&
dofix(&idesc[2], "SUMMARY INFORMATION BAD")) {
memmove(cg, newcg, (size_t)basesize);
cgdirty(cgbp);
}
if (bkgrdflag != 0 || usedsoftdep || debug)
update_maps(cg, newcg, bkgrdflag);
if (cursnapshot == 0 &&
memcmp(cg_inosused(newcg), cg_inosused(cg), mapsize) != 0 &&
dofix(&idesc[1], "BLK(S) MISSING IN BIT MAPS")) {
memmove(cg_inosused(cg), cg_inosused(newcg),
(size_t)mapsize);
cgdirty(cgbp);
}
}
if (cursnapshot == 0 &&
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
memcmp(&cstotal, &fs->fs_cstotal, sizeof cstotal) != 0
&& dofix(&idesc[0], "SUMMARY BLK COUNT(S) WRONG IN SUPERBLK")) {
memmove(&fs->fs_cstotal, &cstotal, sizeof cstotal);
fs->fs_ronly = 0;
fs->fs_fmod = 0;
sbdirty();
}
/*
* When doing background fsck on a snapshot, figure out whether
* the superblock summary is inaccurate and correct it when
* necessary.
*/
if (cursnapshot != 0) {
cmd.size = 1;
cmd.value = cstotal.cs_ndir - fs->fs_cstotal.cs_ndir;
if (cmd.value != 0) {
if (debug)
printf("adjndir by %+" PRIi64 "\n", cmd.value);
if (bkgrdsumadj == 0 || sysctl(adjndir, MIBSIZE, 0, 0,
&cmd, sizeof cmd) == -1)
rwerror("ADJUST NUMBER OF DIRECTORIES", cmd.value);
}
cmd.value = cstotal.cs_nbfree - fs->fs_cstotal.cs_nbfree;
if (cmd.value != 0) {
if (debug)
printf("adjnbfree by %+" PRIi64 "\n", cmd.value);
if (bkgrdsumadj == 0 || sysctl(adjnbfree, MIBSIZE, 0, 0,
&cmd, sizeof cmd) == -1)
rwerror("ADJUST NUMBER OF FREE BLOCKS", cmd.value);
}
cmd.value = cstotal.cs_nifree - fs->fs_cstotal.cs_nifree;
if (cmd.value != 0) {
if (debug)
printf("adjnifree by %+" PRIi64 "\n", cmd.value);
if (bkgrdsumadj == 0 || sysctl(adjnifree, MIBSIZE, 0, 0,
&cmd, sizeof cmd) == -1)
rwerror("ADJUST NUMBER OF FREE INODES", cmd.value);
}
cmd.value = cstotal.cs_nffree - fs->fs_cstotal.cs_nffree;
if (cmd.value != 0) {
if (debug)
printf("adjnffree by %+" PRIi64 "\n", cmd.value);
if (bkgrdsumadj == 0 || sysctl(adjnffree, MIBSIZE, 0, 0,
&cmd, sizeof cmd) == -1)
rwerror("ADJUST NUMBER OF FREE FRAGS", cmd.value);
}
cmd.value = cstotal.cs_numclusters - fs->fs_cstotal.cs_numclusters;
if (cmd.value != 0) {
if (debug)
printf("adjnumclusters by %+" PRIi64 "\n", cmd.value);
if (bkgrdsumadj == 0 || sysctl(adjnumclusters, MIBSIZE, 0, 0,
&cmd, sizeof cmd) == -1)
rwerror("ADJUST NUMBER OF FREE CLUSTERS", cmd.value);
}
}
}
/*
* Compare the original cylinder group inode and block bitmaps with the
* updated cylinder group inode and block bitmaps. Free inodes and blocks
* that have been added. Complain if any previously freed inodes blocks
* are now allocated.
*/
void
update_maps(
struct cg *oldcg, /* cylinder group of claimed allocations */
struct cg *newcg, /* cylinder group of determined allocations */
int usesysctl) /* 1 => use sysctl interface to update maps */
{
int inomapsize, excessdirs;
struct fs *fs = &sblock;
inomapsize = howmany(fs->fs_ipg, CHAR_BIT);
excessdirs = oldcg->cg_cs.cs_ndir - newcg->cg_cs.cs_ndir;
if (excessdirs < 0) {
pfatal("LOST %d DIRECTORIES\n", -excessdirs);
excessdirs = 0;
}
if (excessdirs > 0)
check_maps(cg_inosused(newcg), cg_inosused(oldcg), inomapsize,
oldcg->cg_cgx * (ufs2_daddr_t)fs->fs_ipg, "DIR", freedirs,
0, excessdirs, usesysctl);
check_maps(cg_inosused(newcg), cg_inosused(oldcg), inomapsize,
oldcg->cg_cgx * (ufs2_daddr_t)fs->fs_ipg, "FILE", freefiles,
excessdirs, fs->fs_ipg, usesysctl);
check_maps(cg_blksfree(oldcg), cg_blksfree(newcg),
howmany(fs->fs_fpg, CHAR_BIT),
oldcg->cg_cgx * (ufs2_daddr_t)fs->fs_fpg, "FRAG",
freeblks, 0, fs->fs_fpg, usesysctl);
}
static void
check_maps(
u_char *map1, /* map of claimed allocations */
u_char *map2, /* map of determined allocations */
int mapsize, /* size of above two maps */
ufs2_daddr_t startvalue, /* resource value for first element in map */
const char *name, /* name of resource found in maps */
int *opcode, /* sysctl opcode to free resource */
int skip, /* number of entries to skip before starting to free */
int limit, /* limit on number of entries to free */
int usesysctl) /* 1 => use sysctl interface to update maps */
{
# define BUFSIZE 16
char buf[BUFSIZE];
long i, j, k, l, m, size;
ufs2_daddr_t n, astart, aend, ustart, uend;
void (*msg)(const char *fmt, ...);
if (usesysctl)
msg = pfatal;
else
msg = pwarn;
astart = ustart = aend = uend = -1;
for (i = 0; i < mapsize; i++) {
j = *map1++;
k = *map2++;
if (j == k)
continue;
for (m = 0, l = 1; m < CHAR_BIT; m++, l <<= 1) {
if ((j & l) == (k & l))
continue;
n = startvalue + i * CHAR_BIT + m;
if ((j & l) != 0) {
if (astart == -1) {
astart = aend = n;
continue;
}
if (aend + 1 == n) {
aend = n;
continue;
}
if (astart == aend)
(*msg)("ALLOCATED %s %" PRId64
" MARKED FREE\n",
name, astart);
else
(*msg)("%s %sS %" PRId64 "-%" PRId64
" MARKED FREE\n",
"ALLOCATED", name, astart, aend);
astart = aend = n;
} else {
if (ustart == -1) {
ustart = uend = n;
continue;
}
if (uend + 1 == n) {
uend = n;
continue;
}
size = uend - ustart + 1;
if (size <= skip) {
skip -= size;
ustart = uend = n;
continue;
}
if (skip > 0) {
ustart += skip;
size -= skip;
skip = 0;
}
if (size > limit)
size = limit;
if (debug && size == 1)
pwarn("%s %s %" PRId64
" MARKED USED\n",
"UNALLOCATED", name, ustart);
else if (debug)
pwarn("%s %sS %" PRId64 "-%" PRId64
" MARKED USED\n",
"UNALLOCATED", name, ustart,
ustart + size - 1);
if (usesysctl != 0) {
cmd.value = ustart;
cmd.size = size;
if (sysctl(opcode, MIBSIZE, 0, 0,
&cmd, sizeof cmd) == -1) {
snprintf(buf, BUFSIZE,
"FREE %s", name);
rwerror(buf, cmd.value);
}
}
limit -= size;
if (limit <= 0)
return;
ustart = uend = n;
}
}
}
if (astart != -1) {
if (astart == aend)
(*msg)("ALLOCATED %s %" PRId64
" MARKED FREE\n", name, astart);
else
(*msg)("ALLOCATED %sS %" PRId64 "-%" PRId64
" MARKED FREE\n",
name, astart, aend);
}
if (ustart != -1) {
size = uend - ustart + 1;
if (size <= skip)
return;
if (skip > 0) {
ustart += skip;
size -= skip;
}
if (size > limit)
size = limit;
if (debug) {
if (size == 1)
pwarn("UNALLOCATED %s %" PRId64
" MARKED USED\n",
name, ustart);
else
pwarn("UNALLOCATED %sS %" PRId64 "-%" PRId64
" MARKED USED\n",
name, ustart, ustart + size - 1);
}
if (usesysctl != 0) {
cmd.value = ustart;
cmd.size = size;
if (sysctl(opcode, MIBSIZE, 0, 0, &cmd,
sizeof cmd) == -1) {
snprintf(buf, BUFSIZE, "FREE %s", name);
rwerror(buf, cmd.value);
}
}
}
}
2013-04-29 20:14:11 +00:00
static void
clear_blocks(ufs2_daddr_t start, ufs2_daddr_t end)
{
if (debug)
printf("Zero frags %jd to %jd\n", start, end);
if (Zflag)
blzero(fswritefd, fsbtodb(&sblock, start),
lfragtosize(&sblock, end - start + 1));
if (Eflag)
blerase(fswritefd, fsbtodb(&sblock, start),
lfragtosize(&sblock, end - start + 1));
}