Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
/*-
|
|
|
|
* Copyright (c) 2009 The FreeBSD Foundation
|
|
|
|
* All rights reserved.
|
|
|
|
*
|
|
|
|
* This software was developed by Rui Paulo under sponsorship from the
|
|
|
|
* FreeBSD Foundation.
|
|
|
|
*
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
* are met:
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
|
|
|
*
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
|
|
* SUCH DAMAGE.
|
|
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
|
|
#ifdef __FreeBSD__
|
|
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/*
|
|
|
|
* IEEE 802.11s Hybrid Wireless Mesh Protocol, HWMP.
|
2012-01-21 00:38:18 +00:00
|
|
|
*
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
* Based on March 2009, D3.0 802.11s draft spec.
|
|
|
|
*/
|
|
|
|
#include "opt_inet.h"
|
|
|
|
#include "opt_wlan.h"
|
|
|
|
|
|
|
|
#include <sys/param.h>
|
2012-01-21 00:38:18 +00:00
|
|
|
#include <sys/systm.h>
|
|
|
|
#include <sys/mbuf.h>
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
#include <sys/malloc.h>
|
|
|
|
#include <sys/kernel.h>
|
|
|
|
|
|
|
|
#include <sys/socket.h>
|
|
|
|
#include <sys/sockio.h>
|
|
|
|
#include <sys/endian.h>
|
|
|
|
#include <sys/errno.h>
|
|
|
|
#include <sys/proc.h>
|
|
|
|
#include <sys/sysctl.h>
|
|
|
|
|
|
|
|
#include <net/if.h>
|
|
|
|
#include <net/if_media.h>
|
|
|
|
#include <net/if_llc.h>
|
|
|
|
#include <net/ethernet.h>
|
|
|
|
|
|
|
|
#include <net/bpf.h>
|
|
|
|
|
|
|
|
#include <net80211/ieee80211_var.h>
|
|
|
|
#include <net80211/ieee80211_action.h>
|
|
|
|
#include <net80211/ieee80211_input.h>
|
|
|
|
#include <net80211/ieee80211_mesh.h>
|
|
|
|
|
|
|
|
static void hwmp_vattach(struct ieee80211vap *);
|
|
|
|
static void hwmp_vdetach(struct ieee80211vap *);
|
|
|
|
static int hwmp_newstate(struct ieee80211vap *,
|
|
|
|
enum ieee80211_state, int);
|
2013-02-07 21:26:40 +00:00
|
|
|
static int hwmp_send_action(struct ieee80211vap *,
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
const uint8_t [IEEE80211_ADDR_LEN],
|
|
|
|
uint8_t *, size_t);
|
|
|
|
static uint8_t * hwmp_add_meshpreq(uint8_t *,
|
|
|
|
const struct ieee80211_meshpreq_ie *);
|
|
|
|
static uint8_t * hwmp_add_meshprep(uint8_t *,
|
|
|
|
const struct ieee80211_meshprep_ie *);
|
|
|
|
static uint8_t * hwmp_add_meshperr(uint8_t *,
|
|
|
|
const struct ieee80211_meshperr_ie *);
|
|
|
|
static uint8_t * hwmp_add_meshrann(uint8_t *,
|
|
|
|
const struct ieee80211_meshrann_ie *);
|
|
|
|
static void hwmp_rootmode_setup(struct ieee80211vap *);
|
|
|
|
static void hwmp_rootmode_cb(void *);
|
|
|
|
static void hwmp_rootmode_rann_cb(void *);
|
|
|
|
static void hwmp_recv_preq(struct ieee80211vap *, struct ieee80211_node *,
|
|
|
|
const struct ieee80211_frame *,
|
|
|
|
const struct ieee80211_meshpreq_ie *);
|
2013-02-07 21:26:40 +00:00
|
|
|
static int hwmp_send_preq(struct ieee80211vap *,
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
const uint8_t [IEEE80211_ADDR_LEN],
|
2012-05-01 16:03:27 +00:00
|
|
|
struct ieee80211_meshpreq_ie *,
|
|
|
|
struct timeval *, struct timeval *);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
static void hwmp_recv_prep(struct ieee80211vap *, struct ieee80211_node *,
|
|
|
|
const struct ieee80211_frame *,
|
|
|
|
const struct ieee80211_meshprep_ie *);
|
2013-02-07 21:26:40 +00:00
|
|
|
static int hwmp_send_prep(struct ieee80211vap *,
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
const uint8_t [IEEE80211_ADDR_LEN],
|
|
|
|
struct ieee80211_meshprep_ie *);
|
|
|
|
static void hwmp_recv_perr(struct ieee80211vap *, struct ieee80211_node *,
|
|
|
|
const struct ieee80211_frame *,
|
|
|
|
const struct ieee80211_meshperr_ie *);
|
2013-02-07 21:26:40 +00:00
|
|
|
static int hwmp_send_perr(struct ieee80211vap *,
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
const uint8_t [IEEE80211_ADDR_LEN],
|
|
|
|
struct ieee80211_meshperr_ie *);
|
2012-05-01 16:12:39 +00:00
|
|
|
static void hwmp_senderror(struct ieee80211vap *,
|
|
|
|
const uint8_t [IEEE80211_ADDR_LEN],
|
|
|
|
struct ieee80211_mesh_route *, int);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
static void hwmp_recv_rann(struct ieee80211vap *, struct ieee80211_node *,
|
|
|
|
const struct ieee80211_frame *,
|
|
|
|
const struct ieee80211_meshrann_ie *);
|
2013-02-07 21:26:40 +00:00
|
|
|
static int hwmp_send_rann(struct ieee80211vap *,
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
const uint8_t [IEEE80211_ADDR_LEN],
|
|
|
|
struct ieee80211_meshrann_ie *);
|
|
|
|
static struct ieee80211_node *
|
|
|
|
hwmp_discover(struct ieee80211vap *,
|
|
|
|
const uint8_t [IEEE80211_ADDR_LEN], struct mbuf *);
|
|
|
|
static void hwmp_peerdown(struct ieee80211_node *);
|
|
|
|
|
2009-07-21 19:38:22 +00:00
|
|
|
static struct timeval ieee80211_hwmp_preqminint = { 0, 100000 };
|
|
|
|
static struct timeval ieee80211_hwmp_perrminint = { 0, 100000 };
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
|
|
|
/* unalligned little endian access */
|
|
|
|
#define LE_WRITE_2(p, v) do { \
|
|
|
|
((uint8_t *)(p))[0] = (v) & 0xff; \
|
|
|
|
((uint8_t *)(p))[1] = ((v) >> 8) & 0xff; \
|
|
|
|
} while (0)
|
|
|
|
#define LE_WRITE_4(p, v) do { \
|
|
|
|
((uint8_t *)(p))[0] = (v) & 0xff; \
|
|
|
|
((uint8_t *)(p))[1] = ((v) >> 8) & 0xff; \
|
|
|
|
((uint8_t *)(p))[2] = ((v) >> 16) & 0xff; \
|
|
|
|
((uint8_t *)(p))[3] = ((v) >> 24) & 0xff; \
|
|
|
|
} while (0)
|
|
|
|
|
|
|
|
|
|
|
|
/* NB: the Target Address set in a Proactive PREQ is the broadcast address. */
|
|
|
|
static const uint8_t broadcastaddr[IEEE80211_ADDR_LEN] =
|
|
|
|
{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
|
|
|
|
|
|
|
|
typedef uint32_t ieee80211_hwmp_seq;
|
2009-07-27 14:22:09 +00:00
|
|
|
#define HWMP_SEQ_LT(a, b) ((int32_t)((a)-(b)) < 0)
|
|
|
|
#define HWMP_SEQ_LEQ(a, b) ((int32_t)((a)-(b)) <= 0)
|
2012-01-21 00:42:28 +00:00
|
|
|
#define HWMP_SEQ_EQ(a, b) ((int32_t)((a)-(b)) == 0)
|
2009-07-27 14:22:09 +00:00
|
|
|
#define HWMP_SEQ_GT(a, b) ((int32_t)((a)-(b)) > 0)
|
|
|
|
#define HWMP_SEQ_GEQ(a, b) ((int32_t)((a)-(b)) >= 0)
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
2012-05-01 15:56:26 +00:00
|
|
|
#define HWMP_SEQ_MAX(a, b) (a > b ? a : b)
|
|
|
|
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
/*
|
|
|
|
* Private extension of ieee80211_mesh_route.
|
|
|
|
*/
|
|
|
|
struct ieee80211_hwmp_route {
|
2009-07-27 14:22:09 +00:00
|
|
|
ieee80211_hwmp_seq hr_seq; /* last HWMP seq seen from dst*/
|
|
|
|
ieee80211_hwmp_seq hr_preqid; /* last PREQ ID seen from dst */
|
2009-10-19 11:17:46 +00:00
|
|
|
ieee80211_hwmp_seq hr_origseq; /* seq. no. on our latest PREQ*/
|
2012-05-01 16:03:27 +00:00
|
|
|
struct timeval hr_lastpreq; /* last time we sent a PREQ */
|
2012-05-01 16:13:22 +00:00
|
|
|
struct timeval hr_lastrootconf; /* last sent PREQ root conf */
|
2012-05-01 16:05:09 +00:00
|
|
|
int hr_preqretries; /* number of discoveries */
|
|
|
|
int hr_lastdiscovery; /* last discovery in ticks */
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
};
|
|
|
|
struct ieee80211_hwmp_state {
|
|
|
|
ieee80211_hwmp_seq hs_seq; /* next seq to be used */
|
|
|
|
ieee80211_hwmp_seq hs_preqid; /* next PREQ ID to be used */
|
|
|
|
int hs_rootmode; /* proactive HWMP */
|
2012-05-01 16:03:27 +00:00
|
|
|
struct timeval hs_lastperr; /* last time we sent a PERR */
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
struct callout hs_roottimer;
|
|
|
|
uint8_t hs_maxhops; /* max hop count */
|
|
|
|
};
|
|
|
|
|
2011-11-07 15:43:11 +00:00
|
|
|
static SYSCTL_NODE(_net_wlan, OID_AUTO, hwmp, CTLFLAG_RD, 0,
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
"IEEE 802.11s HWMP parameters");
|
2009-07-21 19:38:22 +00:00
|
|
|
static int ieee80211_hwmp_targetonly = 0;
|
2014-10-21 07:31:21 +00:00
|
|
|
SYSCTL_INT(_net_wlan_hwmp, OID_AUTO, targetonly, CTLFLAG_RW,
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
&ieee80211_hwmp_targetonly, 0, "Set TO bit on generated PREQs");
|
2009-07-21 19:38:22 +00:00
|
|
|
static int ieee80211_hwmp_pathtimeout = -1;
|
|
|
|
SYSCTL_PROC(_net_wlan_hwmp, OID_AUTO, pathlifetime, CTLTYPE_INT | CTLFLAG_RW,
|
|
|
|
&ieee80211_hwmp_pathtimeout, 0, ieee80211_sysctl_msecs_ticks, "I",
|
|
|
|
"path entry lifetime (ms)");
|
2012-05-01 16:05:09 +00:00
|
|
|
static int ieee80211_hwmp_maxpreq_retries = -1;
|
|
|
|
SYSCTL_PROC(_net_wlan_hwmp, OID_AUTO, maxpreq_retries, CTLTYPE_INT | CTLFLAG_RW,
|
|
|
|
&ieee80211_hwmp_maxpreq_retries, 0, ieee80211_sysctl_msecs_ticks, "I",
|
|
|
|
"maximum number of preq retries");
|
|
|
|
static int ieee80211_hwmp_net_diameter_traversaltime = -1;
|
|
|
|
SYSCTL_PROC(_net_wlan_hwmp, OID_AUTO, net_diameter_traversal_time,
|
|
|
|
CTLTYPE_INT | CTLFLAG_RW, &ieee80211_hwmp_net_diameter_traversaltime, 0,
|
|
|
|
ieee80211_sysctl_msecs_ticks, "I",
|
|
|
|
"estimate travelse time across the MBSS (ms)");
|
2009-07-21 19:38:22 +00:00
|
|
|
static int ieee80211_hwmp_roottimeout = -1;
|
|
|
|
SYSCTL_PROC(_net_wlan_hwmp, OID_AUTO, roottimeout, CTLTYPE_INT | CTLFLAG_RW,
|
|
|
|
&ieee80211_hwmp_roottimeout, 0, ieee80211_sysctl_msecs_ticks, "I",
|
|
|
|
"root PREQ timeout (ms)");
|
|
|
|
static int ieee80211_hwmp_rootint = -1;
|
|
|
|
SYSCTL_PROC(_net_wlan_hwmp, OID_AUTO, rootint, CTLTYPE_INT | CTLFLAG_RW,
|
|
|
|
&ieee80211_hwmp_rootint, 0, ieee80211_sysctl_msecs_ticks, "I",
|
|
|
|
"root interval (ms)");
|
|
|
|
static int ieee80211_hwmp_rannint = -1;
|
|
|
|
SYSCTL_PROC(_net_wlan_hwmp, OID_AUTO, rannint, CTLTYPE_INT | CTLFLAG_RW,
|
|
|
|
&ieee80211_hwmp_rannint, 0, ieee80211_sysctl_msecs_ticks, "I",
|
|
|
|
"root announcement interval (ms)");
|
2012-05-01 16:13:22 +00:00
|
|
|
static struct timeval ieee80211_hwmp_rootconfint = { 0, 0 };
|
|
|
|
static int ieee80211_hwmp_rootconfint_internal = -1;
|
|
|
|
SYSCTL_PROC(_net_wlan_hwmp, OID_AUTO, rootconfint, CTLTYPE_INT | CTLFLAG_RD,
|
|
|
|
&ieee80211_hwmp_rootconfint_internal, 0, ieee80211_sysctl_msecs_ticks, "I",
|
|
|
|
"root confirmation interval (ms) (read-only)");
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
|
|
|
#define IEEE80211_HWMP_DEFAULT_MAXHOPS 31
|
|
|
|
|
2009-09-22 18:18:14 +00:00
|
|
|
static ieee80211_recv_action_func hwmp_recv_action_meshpath;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
2009-07-21 19:38:22 +00:00
|
|
|
static struct ieee80211_mesh_proto_path mesh_proto_hwmp = {
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
.mpp_descr = "HWMP",
|
2009-10-12 10:08:58 +00:00
|
|
|
.mpp_ie = IEEE80211_MESHCONF_PATH_HWMP,
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
.mpp_discover = hwmp_discover,
|
|
|
|
.mpp_peerdown = hwmp_peerdown,
|
2012-05-01 16:12:39 +00:00
|
|
|
.mpp_senderror = hwmp_senderror,
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
.mpp_vattach = hwmp_vattach,
|
|
|
|
.mpp_vdetach = hwmp_vdetach,
|
|
|
|
.mpp_newstate = hwmp_newstate,
|
|
|
|
.mpp_privlen = sizeof(struct ieee80211_hwmp_route),
|
|
|
|
};
|
2009-07-21 19:38:22 +00:00
|
|
|
SYSCTL_PROC(_net_wlan_hwmp, OID_AUTO, inact, CTLTYPE_INT | CTLFLAG_RW,
|
|
|
|
&mesh_proto_hwmp.mpp_inact, 0, ieee80211_sysctl_msecs_ticks, "I",
|
|
|
|
"mesh route inactivity timeout (ms)");
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
|
|
|
|
|
|
|
static void
|
|
|
|
ieee80211_hwmp_init(void)
|
|
|
|
{
|
2012-05-01 16:05:09 +00:00
|
|
|
/* Default values as per amendment */
|
2009-07-21 19:38:22 +00:00
|
|
|
ieee80211_hwmp_pathtimeout = msecs_to_ticks(5*1000);
|
|
|
|
ieee80211_hwmp_roottimeout = msecs_to_ticks(5*1000);
|
|
|
|
ieee80211_hwmp_rootint = msecs_to_ticks(2*1000);
|
|
|
|
ieee80211_hwmp_rannint = msecs_to_ticks(1*1000);
|
2012-05-01 16:13:22 +00:00
|
|
|
ieee80211_hwmp_rootconfint_internal = msecs_to_ticks(2*1000);
|
2012-05-01 16:05:09 +00:00
|
|
|
ieee80211_hwmp_maxpreq_retries = 3;
|
|
|
|
/*
|
|
|
|
* (TU): A measurement of time equal to 1024 μs,
|
|
|
|
* 500 TU is 512 ms.
|
|
|
|
*/
|
|
|
|
ieee80211_hwmp_net_diameter_traversaltime = msecs_to_ticks(512);
|
2009-07-21 19:38:22 +00:00
|
|
|
|
2012-05-01 16:13:22 +00:00
|
|
|
/*
|
|
|
|
* NB: I dont know how to make SYSCTL_PROC that calls ms to ticks
|
|
|
|
* and return a struct timeval...
|
|
|
|
*/
|
|
|
|
ieee80211_hwmp_rootconfint.tv_usec =
|
|
|
|
ieee80211_hwmp_rootconfint_internal * 1000;
|
|
|
|
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
/*
|
2009-09-22 18:18:14 +00:00
|
|
|
* Register action frame handler.
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
*/
|
2012-03-04 05:49:39 +00:00
|
|
|
ieee80211_recv_action_register(IEEE80211_ACTION_CAT_MESH,
|
|
|
|
IEEE80211_ACTION_MESH_HWMP, hwmp_recv_action_meshpath);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
2009-07-21 19:38:22 +00:00
|
|
|
/* NB: default is 5 secs per spec */
|
|
|
|
mesh_proto_hwmp.mpp_inact = msecs_to_ticks(5*1000);
|
|
|
|
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
/*
|
|
|
|
* Register HWMP.
|
|
|
|
*/
|
|
|
|
ieee80211_mesh_register_proto_path(&mesh_proto_hwmp);
|
|
|
|
}
|
|
|
|
SYSINIT(wlan_hwmp, SI_SUB_DRIVERS, SI_ORDER_SECOND, ieee80211_hwmp_init, NULL);
|
|
|
|
|
|
|
|
void
|
|
|
|
hwmp_vattach(struct ieee80211vap *vap)
|
|
|
|
{
|
|
|
|
struct ieee80211_hwmp_state *hs;
|
|
|
|
|
|
|
|
KASSERT(vap->iv_opmode == IEEE80211_M_MBSS,
|
|
|
|
("not a mesh vap, opmode %d", vap->iv_opmode));
|
|
|
|
|
2015-05-25 19:18:16 +00:00
|
|
|
hs = IEEE80211_MALLOC(sizeof(struct ieee80211_hwmp_state), M_80211_VAP,
|
|
|
|
IEEE80211_M_NOWAIT | IEEE80211_M_ZERO);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
if (hs == NULL) {
|
|
|
|
printf("%s: couldn't alloc HWMP state\n", __func__);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
hs->hs_maxhops = IEEE80211_HWMP_DEFAULT_MAXHOPS;
|
2015-05-22 17:05:21 +00:00
|
|
|
callout_init(&hs->hs_roottimer, 1);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
vap->iv_hwmp = hs;
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
hwmp_vdetach(struct ieee80211vap *vap)
|
|
|
|
{
|
|
|
|
struct ieee80211_hwmp_state *hs = vap->iv_hwmp;
|
|
|
|
|
2009-07-20 19:12:08 +00:00
|
|
|
callout_drain(&hs->hs_roottimer);
|
2015-05-25 19:18:16 +00:00
|
|
|
IEEE80211_FREE(vap->iv_hwmp, M_80211_VAP);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
vap->iv_hwmp = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
hwmp_newstate(struct ieee80211vap *vap, enum ieee80211_state ostate, int arg)
|
|
|
|
{
|
|
|
|
enum ieee80211_state nstate = vap->iv_state;
|
|
|
|
struct ieee80211_hwmp_state *hs = vap->iv_hwmp;
|
|
|
|
|
|
|
|
IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE, "%s: %s -> %s (%d)\n",
|
|
|
|
__func__, ieee80211_state_name[ostate],
|
|
|
|
ieee80211_state_name[nstate], arg);
|
|
|
|
|
|
|
|
if (nstate != IEEE80211_S_RUN && ostate == IEEE80211_S_RUN)
|
|
|
|
callout_drain(&hs->hs_roottimer);
|
2009-07-20 19:12:08 +00:00
|
|
|
if (nstate == IEEE80211_S_RUN)
|
|
|
|
hwmp_rootmode_setup(vap);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2012-03-06 21:20:16 +00:00
|
|
|
/*
|
|
|
|
* Verify the length of an HWMP PREQ and return the number
|
|
|
|
* of destinations >= 1, if verification fails -1 is returned.
|
|
|
|
*/
|
|
|
|
static int
|
|
|
|
verify_mesh_preq_len(struct ieee80211vap *vap,
|
|
|
|
const struct ieee80211_frame *wh, const uint8_t *iefrm)
|
|
|
|
{
|
|
|
|
int alloc_sz = -1;
|
|
|
|
int ndest = -1;
|
|
|
|
if (iefrm[2] & IEEE80211_MESHPREQ_FLAGS_AE) {
|
|
|
|
/* Originator External Address present */
|
|
|
|
alloc_sz = IEEE80211_MESHPREQ_BASE_SZ_AE;
|
|
|
|
ndest = iefrm[IEEE80211_MESHPREQ_TCNT_OFFSET_AE];
|
|
|
|
} else {
|
|
|
|
/* w/o Originator External Address */
|
|
|
|
alloc_sz = IEEE80211_MESHPREQ_BASE_SZ;
|
|
|
|
ndest = iefrm[IEEE80211_MESHPREQ_TCNT_OFFSET];
|
|
|
|
}
|
|
|
|
alloc_sz += ndest * IEEE80211_MESHPREQ_TRGT_SZ;
|
|
|
|
|
|
|
|
if(iefrm[1] != (alloc_sz)) {
|
|
|
|
IEEE80211_DISCARD(vap,
|
|
|
|
IEEE80211_MSG_ACTION | IEEE80211_MSG_HWMP,
|
|
|
|
wh, NULL, "PREQ (AE=%s) with wrong len",
|
|
|
|
iefrm[2] & IEEE80211_MESHPREQ_FLAGS_AE ? "1" : "0");
|
|
|
|
return (-1);
|
|
|
|
}
|
|
|
|
return ndest;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Verify the length of an HWMP PREP and returns 1 on success,
|
|
|
|
* otherwise -1.
|
|
|
|
*/
|
|
|
|
static int
|
|
|
|
verify_mesh_prep_len(struct ieee80211vap *vap,
|
|
|
|
const struct ieee80211_frame *wh, const uint8_t *iefrm)
|
|
|
|
{
|
|
|
|
int alloc_sz = -1;
|
|
|
|
if (iefrm[2] & IEEE80211_MESHPREP_FLAGS_AE) {
|
|
|
|
if (iefrm[1] == IEEE80211_MESHPREP_BASE_SZ_AE)
|
|
|
|
alloc_sz = IEEE80211_MESHPREP_BASE_SZ_AE;
|
|
|
|
} else if (iefrm[1] == IEEE80211_MESHPREP_BASE_SZ)
|
|
|
|
alloc_sz = IEEE80211_MESHPREP_BASE_SZ;
|
|
|
|
if(alloc_sz < 0) {
|
|
|
|
IEEE80211_DISCARD(vap,
|
|
|
|
IEEE80211_MSG_ACTION | IEEE80211_MSG_HWMP,
|
|
|
|
wh, NULL, "PREP (AE=%s) with wrong len",
|
|
|
|
iefrm[2] & IEEE80211_MESHPREP_FLAGS_AE ? "1" : "0");
|
|
|
|
return (-1);
|
|
|
|
}
|
|
|
|
return (1);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Verify the length of an HWMP PERR and return the number
|
|
|
|
* of destinations >= 1, if verification fails -1 is returned.
|
|
|
|
*/
|
|
|
|
static int
|
|
|
|
verify_mesh_perr_len(struct ieee80211vap *vap,
|
|
|
|
const struct ieee80211_frame *wh, const uint8_t *iefrm)
|
|
|
|
{
|
|
|
|
int alloc_sz = -1;
|
|
|
|
const uint8_t *iefrm_t = iefrm;
|
|
|
|
uint8_t ndest = iefrm_t[IEEE80211_MESHPERR_NDEST_OFFSET];
|
|
|
|
int i;
|
|
|
|
|
|
|
|
if(ndest > IEEE80211_MESHPERR_MAXDEST) {
|
|
|
|
IEEE80211_DISCARD(vap,
|
|
|
|
IEEE80211_MSG_ACTION | IEEE80211_MSG_HWMP,
|
|
|
|
wh, NULL, "PERR with wrong number of destionat (>19), %u",
|
|
|
|
ndest);
|
|
|
|
return (-1);
|
|
|
|
}
|
|
|
|
|
|
|
|
iefrm_t += IEEE80211_MESHPERR_NDEST_OFFSET + 1; /* flag is next field */
|
|
|
|
/* We need to check each destionation flag to know size */
|
|
|
|
for(i = 0; i<ndest; i++) {
|
|
|
|
if ((*iefrm_t) & IEEE80211_MESHPERR_FLAGS_AE)
|
|
|
|
iefrm_t += IEEE80211_MESHPERR_DEST_SZ_AE;
|
|
|
|
else
|
|
|
|
iefrm_t += IEEE80211_MESHPERR_DEST_SZ;
|
|
|
|
}
|
|
|
|
|
|
|
|
alloc_sz = (iefrm_t - iefrm) - 2; /* action + code */
|
|
|
|
if(alloc_sz != iefrm[1]) {
|
|
|
|
IEEE80211_DISCARD(vap,
|
|
|
|
IEEE80211_MSG_ACTION | IEEE80211_MSG_HWMP,
|
|
|
|
wh, NULL, "%s", "PERR with wrong len");
|
|
|
|
return (-1);
|
|
|
|
}
|
|
|
|
return ndest;
|
|
|
|
}
|
|
|
|
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
static int
|
2009-09-22 18:18:14 +00:00
|
|
|
hwmp_recv_action_meshpath(struct ieee80211_node *ni,
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
const struct ieee80211_frame *wh,
|
|
|
|
const uint8_t *frm, const uint8_t *efrm)
|
|
|
|
{
|
|
|
|
struct ieee80211vap *vap = ni->ni_vap;
|
2012-03-06 21:20:16 +00:00
|
|
|
struct ieee80211_meshpreq_ie *preq;
|
|
|
|
struct ieee80211_meshprep_ie *prep;
|
|
|
|
struct ieee80211_meshperr_ie *perr;
|
2009-09-22 18:18:14 +00:00
|
|
|
struct ieee80211_meshrann_ie rann;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
const uint8_t *iefrm = frm + 2; /* action + code */
|
2012-03-06 21:20:16 +00:00
|
|
|
const uint8_t *iefrm_t = iefrm; /* temporary pointer */
|
|
|
|
int ndest = -1;
|
2009-09-22 18:18:14 +00:00
|
|
|
int found = 0;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
|
|
|
while (efrm - iefrm > 1) {
|
|
|
|
IEEE80211_VERIFY_LENGTH(efrm - iefrm, iefrm[1] + 2, return 0);
|
2009-09-22 18:18:14 +00:00
|
|
|
switch (*iefrm) {
|
|
|
|
case IEEE80211_ELEMID_MESHPREQ:
|
|
|
|
{
|
2012-03-06 21:20:16 +00:00
|
|
|
int i = 0;
|
|
|
|
|
|
|
|
iefrm_t = iefrm;
|
|
|
|
ndest = verify_mesh_preq_len(vap, wh, iefrm_t);
|
|
|
|
if (ndest < 0) {
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
vap->iv_stats.is_rx_mgtdiscard++;
|
2009-09-22 18:18:14 +00:00
|
|
|
break;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
2015-05-25 19:18:16 +00:00
|
|
|
preq = IEEE80211_MALLOC(sizeof(*preq) +
|
2012-03-06 21:20:16 +00:00
|
|
|
(ndest - 1) * sizeof(*preq->preq_targets),
|
2015-05-25 19:18:16 +00:00
|
|
|
M_80211_MESH_PREQ,
|
|
|
|
IEEE80211_M_NOWAIT | IEEE80211_M_ZERO);
|
2012-03-06 21:20:16 +00:00
|
|
|
KASSERT(preq != NULL, ("preq == NULL"));
|
|
|
|
|
|
|
|
preq->preq_ie = *iefrm_t++;
|
|
|
|
preq->preq_len = *iefrm_t++;
|
|
|
|
preq->preq_flags = *iefrm_t++;
|
|
|
|
preq->preq_hopcount = *iefrm_t++;
|
|
|
|
preq->preq_ttl = *iefrm_t++;
|
|
|
|
preq->preq_id = LE_READ_4(iefrm_t); iefrm_t += 4;
|
|
|
|
IEEE80211_ADDR_COPY(preq->preq_origaddr, iefrm_t);
|
|
|
|
iefrm_t += 6;
|
|
|
|
preq->preq_origseq = LE_READ_4(iefrm_t); iefrm_t += 4;
|
|
|
|
/* NB: may have Originator Proxied Address */
|
|
|
|
if (preq->preq_flags & IEEE80211_MESHPREQ_FLAGS_AE) {
|
|
|
|
IEEE80211_ADDR_COPY(
|
|
|
|
preq->preq_orig_ext_addr, iefrm_t);
|
|
|
|
iefrm_t += 6;
|
|
|
|
}
|
|
|
|
preq->preq_lifetime = LE_READ_4(iefrm_t); iefrm_t += 4;
|
|
|
|
preq->preq_metric = LE_READ_4(iefrm_t); iefrm_t += 4;
|
|
|
|
preq->preq_tcount = *iefrm_t++;
|
|
|
|
|
|
|
|
for (i = 0; i < preq->preq_tcount; i++) {
|
|
|
|
preq->preq_targets[i].target_flags = *iefrm_t++;
|
|
|
|
IEEE80211_ADDR_COPY(
|
|
|
|
preq->preq_targets[i].target_addr, iefrm_t);
|
|
|
|
iefrm_t += 6;
|
|
|
|
preq->preq_targets[i].target_seq =
|
|
|
|
LE_READ_4(iefrm_t);
|
|
|
|
iefrm_t += 4;
|
|
|
|
}
|
|
|
|
|
|
|
|
hwmp_recv_preq(vap, ni, wh, preq);
|
2015-05-25 19:18:16 +00:00
|
|
|
IEEE80211_FREE(preq, M_80211_MESH_PREQ);
|
2009-09-22 18:18:14 +00:00
|
|
|
found++;
|
2012-03-06 21:20:16 +00:00
|
|
|
break;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
2009-09-22 18:18:14 +00:00
|
|
|
case IEEE80211_ELEMID_MESHPREP:
|
|
|
|
{
|
2012-03-06 21:20:16 +00:00
|
|
|
iefrm_t = iefrm;
|
|
|
|
ndest = verify_mesh_prep_len(vap, wh, iefrm_t);
|
|
|
|
if (ndest < 0) {
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
vap->iv_stats.is_rx_mgtdiscard++;
|
2009-09-22 18:18:14 +00:00
|
|
|
break;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
2015-05-25 19:18:16 +00:00
|
|
|
prep = IEEE80211_MALLOC(sizeof(*prep),
|
|
|
|
M_80211_MESH_PREP,
|
|
|
|
IEEE80211_M_NOWAIT | IEEE80211_M_ZERO);
|
2012-03-06 21:20:16 +00:00
|
|
|
KASSERT(prep != NULL, ("prep == NULL"));
|
|
|
|
|
|
|
|
prep->prep_ie = *iefrm_t++;
|
|
|
|
prep->prep_len = *iefrm_t++;
|
|
|
|
prep->prep_flags = *iefrm_t++;
|
|
|
|
prep->prep_hopcount = *iefrm_t++;
|
|
|
|
prep->prep_ttl = *iefrm_t++;
|
|
|
|
IEEE80211_ADDR_COPY(prep->prep_targetaddr, iefrm_t);
|
|
|
|
iefrm_t += 6;
|
|
|
|
prep->prep_targetseq = LE_READ_4(iefrm_t); iefrm_t += 4;
|
|
|
|
/* NB: May have Target Proxied Address */
|
|
|
|
if (prep->prep_flags & IEEE80211_MESHPREP_FLAGS_AE) {
|
|
|
|
IEEE80211_ADDR_COPY(
|
|
|
|
prep->prep_target_ext_addr, iefrm_t);
|
|
|
|
iefrm_t += 6;
|
|
|
|
}
|
|
|
|
prep->prep_lifetime = LE_READ_4(iefrm_t); iefrm_t += 4;
|
|
|
|
prep->prep_metric = LE_READ_4(iefrm_t); iefrm_t += 4;
|
|
|
|
IEEE80211_ADDR_COPY(prep->prep_origaddr, iefrm_t);
|
|
|
|
iefrm_t += 6;
|
|
|
|
prep->prep_origseq = LE_READ_4(iefrm_t); iefrm_t += 4;
|
|
|
|
|
|
|
|
hwmp_recv_prep(vap, ni, wh, prep);
|
2015-05-25 19:18:16 +00:00
|
|
|
IEEE80211_FREE(prep, M_80211_MESH_PREP);
|
2009-09-22 18:18:14 +00:00
|
|
|
found++;
|
|
|
|
break;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
2009-09-22 18:18:14 +00:00
|
|
|
case IEEE80211_ELEMID_MESHPERR:
|
|
|
|
{
|
2012-03-06 21:20:16 +00:00
|
|
|
int i = 0;
|
|
|
|
|
|
|
|
iefrm_t = iefrm;
|
|
|
|
ndest = verify_mesh_perr_len(vap, wh, iefrm_t);
|
|
|
|
if (ndest < 0) {
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
vap->iv_stats.is_rx_mgtdiscard++;
|
2009-09-22 18:18:14 +00:00
|
|
|
break;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
2015-05-25 19:18:16 +00:00
|
|
|
perr = IEEE80211_MALLOC(sizeof(*perr) +
|
2012-03-06 21:20:16 +00:00
|
|
|
(ndest - 1) * sizeof(*perr->perr_dests),
|
2015-05-25 19:18:16 +00:00
|
|
|
M_80211_MESH_PERR,
|
|
|
|
IEEE80211_M_NOWAIT | IEEE80211_M_ZERO);
|
2012-03-06 21:20:16 +00:00
|
|
|
KASSERT(perr != NULL, ("perr == NULL"));
|
|
|
|
|
|
|
|
perr->perr_ie = *iefrm_t++;
|
|
|
|
perr->perr_len = *iefrm_t++;
|
|
|
|
perr->perr_ttl = *iefrm_t++;
|
|
|
|
perr->perr_ndests = *iefrm_t++;
|
|
|
|
|
|
|
|
for (i = 0; i<perr->perr_ndests; i++) {
|
|
|
|
perr->perr_dests[i].dest_flags = *iefrm_t++;
|
|
|
|
IEEE80211_ADDR_COPY(
|
|
|
|
perr->perr_dests[i].dest_addr, iefrm_t);
|
|
|
|
iefrm_t += 6;
|
|
|
|
perr->perr_dests[i].dest_seq = LE_READ_4(iefrm_t);
|
|
|
|
iefrm_t += 4;
|
|
|
|
/* NB: May have Target Proxied Address */
|
|
|
|
if (perr->perr_dests[i].dest_flags &
|
|
|
|
IEEE80211_MESHPERR_FLAGS_AE) {
|
|
|
|
IEEE80211_ADDR_COPY(
|
|
|
|
perr->perr_dests[i].dest_ext_addr,
|
|
|
|
iefrm_t);
|
|
|
|
iefrm_t += 6;
|
|
|
|
}
|
|
|
|
perr->perr_dests[i].dest_rcode =
|
|
|
|
LE_READ_2(iefrm_t);
|
|
|
|
iefrm_t += 2;
|
|
|
|
}
|
|
|
|
|
|
|
|
hwmp_recv_perr(vap, ni, wh, perr);
|
2015-05-25 19:18:16 +00:00
|
|
|
IEEE80211_FREE(perr, M_80211_MESH_PERR);
|
2009-09-22 18:18:14 +00:00
|
|
|
found++;
|
|
|
|
break;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
2009-09-22 18:18:14 +00:00
|
|
|
case IEEE80211_ELEMID_MESHRANN:
|
|
|
|
{
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
const struct ieee80211_meshrann_ie *mrann =
|
|
|
|
(const struct ieee80211_meshrann_ie *) iefrm;
|
|
|
|
if (mrann->rann_len !=
|
|
|
|
sizeof(struct ieee80211_meshrann_ie) - 2) {
|
|
|
|
IEEE80211_DISCARD(vap,
|
|
|
|
IEEE80211_MSG_ACTION | IEEE80211_MSG_HWMP,
|
|
|
|
wh, NULL, "%s", "RAN with wrong len");
|
2012-03-06 21:20:16 +00:00
|
|
|
vap->iv_stats.is_rx_mgtdiscard++;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
memcpy(&rann, mrann, sizeof(rann));
|
|
|
|
rann.rann_seq = LE_READ_4(&mrann->rann_seq);
|
2012-05-01 16:13:22 +00:00
|
|
|
rann.rann_interval = LE_READ_4(&mrann->rann_interval);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
rann.rann_metric = LE_READ_4(&mrann->rann_metric);
|
|
|
|
hwmp_recv_rann(vap, ni, wh, &rann);
|
2009-09-22 18:18:14 +00:00
|
|
|
found++;
|
|
|
|
break;
|
|
|
|
}
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
|
|
|
iefrm += iefrm[1] + 2;
|
|
|
|
}
|
2009-09-22 18:18:14 +00:00
|
|
|
if (!found) {
|
|
|
|
IEEE80211_DISCARD(vap,
|
|
|
|
IEEE80211_MSG_ACTION | IEEE80211_MSG_HWMP,
|
|
|
|
wh, NULL, "%s", "PATH SEL action without IE");
|
|
|
|
vap->iv_stats.is_rx_mgtdiscard++;
|
|
|
|
}
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
2013-02-07 21:26:40 +00:00
|
|
|
hwmp_send_action(struct ieee80211vap *vap,
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
const uint8_t da[IEEE80211_ADDR_LEN],
|
|
|
|
uint8_t *ie, size_t len)
|
|
|
|
{
|
2013-02-07 21:26:40 +00:00
|
|
|
struct ieee80211_node *ni;
|
|
|
|
struct ieee80211com *ic;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
struct ieee80211_bpf_params params;
|
|
|
|
struct mbuf *m;
|
|
|
|
uint8_t *frm;
|
Bring over my initial work from the net80211 TX locking branch.
This patchset implements a new TX lock, covering both the per-VAP (and
thus per-node) TX locking and the serialisation through to the underlying
physical device.
This implements the hard requirement that frames to the underlying physical
device are scheduled to the underlying device in the same order that they
are processed at the VAP layer. This includes adding extra encapsulation
state (such as sequence numbers and CCMP IV numbers.) Any order mismatch
here will result in dropped packets at the receiver.
There are multiple transmit contexts from the upper protocol layers as well
as the "raw" interface via the management and BPF transmit paths.
All of these need to be correctly serialised or bad behaviour will result
under load.
The specifics:
* add a new TX IC lock - it will eventually just be used for serialisation
to the underlying physical device but for now it's used for both the
VAP encapsulation/serialisation and the physical device dispatch.
This lock is specifically non-recursive.
* Methodize the parent transmit, vap transmit and ic_raw_xmit function
pointers; use lock assertions in the parent/vap transmit routines.
* Add a lock assertion in ieee80211_encap() - the TX lock must be held
here to guarantee sensible behaviour.
* Refactor out the packet sending code from ieee80211_start() - now
ieee80211_start() is just a loop over the ifnet queue and it dispatches
each VAP packet send through ieee80211_start_pkt().
Yes, I will likely rename ieee80211_start_pkt() to something that
better reflects its status as a VAP packet transmit path. More on
that later.
* Add locking around the management and BAR TX sending - to ensure that
encapsulation and TX are done hand-in-hand.
* Add locking in the mesh code - again, to ensure that encapsulation
and mesh transmit are done hand-in-hand.
* Add locking around the power save queue and ageq handling, when
dispatching to the parent interface.
* Add locking around the WDS handoff.
* Add a note in the mesh dispatch code that the TX path needs to be
re-thought-out - right now it's doing a direct parent device transmit
rather than going via the vap layer. It may "work", but it's likely
incorrect (as it bypasses any possible per-node power save and
aggregation handling.)
Why not a per-VAP or per-node lock?
Because in order to ensure per-VAP ordering, we'd have to hold the
VAP lock across parent->if_transmit(). There are a few problems
with this:
* There's some state being setup during each driver transmit - specifically,
the encryption encap / CCMP IV setup. That should eventually be dragged
back into the encapsulation phase but for now it lives in the driver TX path.
This should be locked.
* Two drivers (ath, iwn) re-use the node->ni_txseqs array in order to
allocate sequence numbers when doing transmit aggregation. This should
also be locked.
* Drivers may have multiple frames queued already - so when one calls
if_transmit(), it may end up dispatching multiple frames for different
VAPs/nodes, each needing a different lock when handling that particular
end destination.
So to be "correct" locking-wise, we'd end up needing to grab a VAP or
node lock inside the driver TX path when setting up crypto / AMPDU sequence
numbers, and we may already _have_ a TX lock held - mostly for the same
destination vap/node, but sometimes it'll be for others. That could lead
to LORs and thus deadlocks.
So for now, I'm sticking with an IC TX lock. It has the advantage of
papering over the above and it also has the added advantage that I can
assert that it's being held when doing a parent device transmit.
I'll look at splitting the locks out a bit more later on.
General outstanding net80211 TX path issues / TODO:
* Look into separating out the VAP serialisation and the IC handoff.
It's going to be tricky as parent->if_transmit() doesn't give me the
opportunity to split queuing from driver dispatch. See above.
* Work with monthadar to fix up the mesh transmit path so it doesn't go via
the parent interface when retransmitting frames.
* Push the encryption handling back into the driver, if it's at all
architectually sane to do so. I know it's possible - it's what mac80211
in Linux does.
* Make ieee80211_raw_xmit() queue a frame into VAP or parent queue rather
than doing a short-cut direct into the driver. There are QoS issues
here - you do want your management frames to be encapsulated and pushed
onto the stack sooner than the (large, bursty) amount of data frames
that are queued. But there has to be a saner way to do this.
* Fragments are still broken - drivers need to be upgraded to an if_transmit()
implementation and then fragmentation handling needs to be properly fixed.
Tested:
* STA - AR5416, AR9280, Intel 5300 abgn wifi
* Hostap - AR5416, AR9160, AR9280
* Mesh - some testing by monthadar@, more to come.
2013-03-08 20:23:55 +00:00
|
|
|
int ret;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
2013-02-07 21:26:40 +00:00
|
|
|
if (IEEE80211_IS_MULTICAST(da)) {
|
|
|
|
ni = ieee80211_ref_node(vap->iv_bss);
|
|
|
|
#ifdef IEEE80211_DEBUG_REFCNT
|
|
|
|
IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE,
|
|
|
|
"ieee80211_ref_node (%s:%u) %p<%s> refcnt %d\n",
|
|
|
|
__func__, __LINE__,
|
|
|
|
ni, ether_sprintf(ni->ni_macaddr),
|
|
|
|
ieee80211_node_refcnt(ni)+1);
|
|
|
|
#endif
|
|
|
|
ieee80211_ref_node(ni);
|
|
|
|
}
|
|
|
|
else
|
|
|
|
ni = ieee80211_mesh_find_txnode(vap, da);
|
|
|
|
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
if (vap->iv_state == IEEE80211_S_CAC) {
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_OUTPUT, ni,
|
|
|
|
"block %s frame in CAC state", "HWMP action");
|
|
|
|
vap->iv_stats.is_tx_badstate++;
|
|
|
|
return EIO; /* XXX */
|
|
|
|
}
|
|
|
|
|
|
|
|
KASSERT(ni != NULL, ("null node"));
|
2013-02-07 21:26:40 +00:00
|
|
|
ic = ni->ni_ic;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
|
|
|
m = ieee80211_getmgtframe(&frm,
|
|
|
|
ic->ic_headroom + sizeof(struct ieee80211_frame),
|
|
|
|
sizeof(struct ieee80211_action) + len
|
|
|
|
);
|
|
|
|
if (m == NULL) {
|
|
|
|
ieee80211_free_node(ni);
|
|
|
|
vap->iv_stats.is_tx_nobuf++;
|
|
|
|
return ENOMEM;
|
|
|
|
}
|
2012-03-04 05:49:39 +00:00
|
|
|
*frm++ = IEEE80211_ACTION_CAT_MESH;
|
|
|
|
*frm++ = IEEE80211_ACTION_MESH_HWMP;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
switch (*ie) {
|
|
|
|
case IEEE80211_ELEMID_MESHPREQ:
|
|
|
|
frm = hwmp_add_meshpreq(frm,
|
|
|
|
(struct ieee80211_meshpreq_ie *)ie);
|
|
|
|
break;
|
|
|
|
case IEEE80211_ELEMID_MESHPREP:
|
|
|
|
frm = hwmp_add_meshprep(frm,
|
|
|
|
(struct ieee80211_meshprep_ie *)ie);
|
|
|
|
break;
|
|
|
|
case IEEE80211_ELEMID_MESHPERR:
|
|
|
|
frm = hwmp_add_meshperr(frm,
|
|
|
|
(struct ieee80211_meshperr_ie *)ie);
|
|
|
|
break;
|
|
|
|
case IEEE80211_ELEMID_MESHRANN:
|
|
|
|
frm = hwmp_add_meshrann(frm,
|
|
|
|
(struct ieee80211_meshrann_ie *)ie);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *);
|
2012-12-05 08:04:20 +00:00
|
|
|
M_PREPEND(m, sizeof(struct ieee80211_frame), M_NOWAIT);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
if (m == NULL) {
|
|
|
|
ieee80211_free_node(ni);
|
|
|
|
vap->iv_stats.is_tx_nobuf++;
|
|
|
|
return ENOMEM;
|
|
|
|
}
|
Bring over my initial work from the net80211 TX locking branch.
This patchset implements a new TX lock, covering both the per-VAP (and
thus per-node) TX locking and the serialisation through to the underlying
physical device.
This implements the hard requirement that frames to the underlying physical
device are scheduled to the underlying device in the same order that they
are processed at the VAP layer. This includes adding extra encapsulation
state (such as sequence numbers and CCMP IV numbers.) Any order mismatch
here will result in dropped packets at the receiver.
There are multiple transmit contexts from the upper protocol layers as well
as the "raw" interface via the management and BPF transmit paths.
All of these need to be correctly serialised or bad behaviour will result
under load.
The specifics:
* add a new TX IC lock - it will eventually just be used for serialisation
to the underlying physical device but for now it's used for both the
VAP encapsulation/serialisation and the physical device dispatch.
This lock is specifically non-recursive.
* Methodize the parent transmit, vap transmit and ic_raw_xmit function
pointers; use lock assertions in the parent/vap transmit routines.
* Add a lock assertion in ieee80211_encap() - the TX lock must be held
here to guarantee sensible behaviour.
* Refactor out the packet sending code from ieee80211_start() - now
ieee80211_start() is just a loop over the ifnet queue and it dispatches
each VAP packet send through ieee80211_start_pkt().
Yes, I will likely rename ieee80211_start_pkt() to something that
better reflects its status as a VAP packet transmit path. More on
that later.
* Add locking around the management and BAR TX sending - to ensure that
encapsulation and TX are done hand-in-hand.
* Add locking in the mesh code - again, to ensure that encapsulation
and mesh transmit are done hand-in-hand.
* Add locking around the power save queue and ageq handling, when
dispatching to the parent interface.
* Add locking around the WDS handoff.
* Add a note in the mesh dispatch code that the TX path needs to be
re-thought-out - right now it's doing a direct parent device transmit
rather than going via the vap layer. It may "work", but it's likely
incorrect (as it bypasses any possible per-node power save and
aggregation handling.)
Why not a per-VAP or per-node lock?
Because in order to ensure per-VAP ordering, we'd have to hold the
VAP lock across parent->if_transmit(). There are a few problems
with this:
* There's some state being setup during each driver transmit - specifically,
the encryption encap / CCMP IV setup. That should eventually be dragged
back into the encapsulation phase but for now it lives in the driver TX path.
This should be locked.
* Two drivers (ath, iwn) re-use the node->ni_txseqs array in order to
allocate sequence numbers when doing transmit aggregation. This should
also be locked.
* Drivers may have multiple frames queued already - so when one calls
if_transmit(), it may end up dispatching multiple frames for different
VAPs/nodes, each needing a different lock when handling that particular
end destination.
So to be "correct" locking-wise, we'd end up needing to grab a VAP or
node lock inside the driver TX path when setting up crypto / AMPDU sequence
numbers, and we may already _have_ a TX lock held - mostly for the same
destination vap/node, but sometimes it'll be for others. That could lead
to LORs and thus deadlocks.
So for now, I'm sticking with an IC TX lock. It has the advantage of
papering over the above and it also has the added advantage that I can
assert that it's being held when doing a parent device transmit.
I'll look at splitting the locks out a bit more later on.
General outstanding net80211 TX path issues / TODO:
* Look into separating out the VAP serialisation and the IC handoff.
It's going to be tricky as parent->if_transmit() doesn't give me the
opportunity to split queuing from driver dispatch. See above.
* Work with monthadar to fix up the mesh transmit path so it doesn't go via
the parent interface when retransmitting frames.
* Push the encryption handling back into the driver, if it's at all
architectually sane to do so. I know it's possible - it's what mac80211
in Linux does.
* Make ieee80211_raw_xmit() queue a frame into VAP or parent queue rather
than doing a short-cut direct into the driver. There are QoS issues
here - you do want your management frames to be encapsulated and pushed
onto the stack sooner than the (large, bursty) amount of data frames
that are queued. But there has to be a saner way to do this.
* Fragments are still broken - drivers need to be upgraded to an if_transmit()
implementation and then fragmentation handling needs to be properly fixed.
Tested:
* STA - AR5416, AR9280, Intel 5300 abgn wifi
* Hostap - AR5416, AR9160, AR9280
* Mesh - some testing by monthadar@, more to come.
2013-03-08 20:23:55 +00:00
|
|
|
|
|
|
|
IEEE80211_TX_LOCK(ic);
|
|
|
|
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
ieee80211_send_setup(ni, m,
|
|
|
|
IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_ACTION,
|
2013-02-07 21:26:40 +00:00
|
|
|
IEEE80211_NONQOS_TID, vap->iv_myaddr, da, vap->iv_myaddr);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
|
|
|
m->m_flags |= M_ENCAP; /* mark encapsulated */
|
|
|
|
IEEE80211_NODE_STAT(ni, tx_mgmt);
|
|
|
|
|
|
|
|
memset(¶ms, 0, sizeof(params));
|
|
|
|
params.ibp_pri = WME_AC_VO;
|
|
|
|
params.ibp_rate0 = ni->ni_txparms->mgmtrate;
|
|
|
|
if (IEEE80211_IS_MULTICAST(da))
|
|
|
|
params.ibp_try0 = 1;
|
|
|
|
else
|
|
|
|
params.ibp_try0 = ni->ni_txparms->maxretry;
|
|
|
|
params.ibp_power = ni->ni_txpower;
|
Bring over my initial work from the net80211 TX locking branch.
This patchset implements a new TX lock, covering both the per-VAP (and
thus per-node) TX locking and the serialisation through to the underlying
physical device.
This implements the hard requirement that frames to the underlying physical
device are scheduled to the underlying device in the same order that they
are processed at the VAP layer. This includes adding extra encapsulation
state (such as sequence numbers and CCMP IV numbers.) Any order mismatch
here will result in dropped packets at the receiver.
There are multiple transmit contexts from the upper protocol layers as well
as the "raw" interface via the management and BPF transmit paths.
All of these need to be correctly serialised or bad behaviour will result
under load.
The specifics:
* add a new TX IC lock - it will eventually just be used for serialisation
to the underlying physical device but for now it's used for both the
VAP encapsulation/serialisation and the physical device dispatch.
This lock is specifically non-recursive.
* Methodize the parent transmit, vap transmit and ic_raw_xmit function
pointers; use lock assertions in the parent/vap transmit routines.
* Add a lock assertion in ieee80211_encap() - the TX lock must be held
here to guarantee sensible behaviour.
* Refactor out the packet sending code from ieee80211_start() - now
ieee80211_start() is just a loop over the ifnet queue and it dispatches
each VAP packet send through ieee80211_start_pkt().
Yes, I will likely rename ieee80211_start_pkt() to something that
better reflects its status as a VAP packet transmit path. More on
that later.
* Add locking around the management and BAR TX sending - to ensure that
encapsulation and TX are done hand-in-hand.
* Add locking in the mesh code - again, to ensure that encapsulation
and mesh transmit are done hand-in-hand.
* Add locking around the power save queue and ageq handling, when
dispatching to the parent interface.
* Add locking around the WDS handoff.
* Add a note in the mesh dispatch code that the TX path needs to be
re-thought-out - right now it's doing a direct parent device transmit
rather than going via the vap layer. It may "work", but it's likely
incorrect (as it bypasses any possible per-node power save and
aggregation handling.)
Why not a per-VAP or per-node lock?
Because in order to ensure per-VAP ordering, we'd have to hold the
VAP lock across parent->if_transmit(). There are a few problems
with this:
* There's some state being setup during each driver transmit - specifically,
the encryption encap / CCMP IV setup. That should eventually be dragged
back into the encapsulation phase but for now it lives in the driver TX path.
This should be locked.
* Two drivers (ath, iwn) re-use the node->ni_txseqs array in order to
allocate sequence numbers when doing transmit aggregation. This should
also be locked.
* Drivers may have multiple frames queued already - so when one calls
if_transmit(), it may end up dispatching multiple frames for different
VAPs/nodes, each needing a different lock when handling that particular
end destination.
So to be "correct" locking-wise, we'd end up needing to grab a VAP or
node lock inside the driver TX path when setting up crypto / AMPDU sequence
numbers, and we may already _have_ a TX lock held - mostly for the same
destination vap/node, but sometimes it'll be for others. That could lead
to LORs and thus deadlocks.
So for now, I'm sticking with an IC TX lock. It has the advantage of
papering over the above and it also has the added advantage that I can
assert that it's being held when doing a parent device transmit.
I'll look at splitting the locks out a bit more later on.
General outstanding net80211 TX path issues / TODO:
* Look into separating out the VAP serialisation and the IC handoff.
It's going to be tricky as parent->if_transmit() doesn't give me the
opportunity to split queuing from driver dispatch. See above.
* Work with monthadar to fix up the mesh transmit path so it doesn't go via
the parent interface when retransmitting frames.
* Push the encryption handling back into the driver, if it's at all
architectually sane to do so. I know it's possible - it's what mac80211
in Linux does.
* Make ieee80211_raw_xmit() queue a frame into VAP or parent queue rather
than doing a short-cut direct into the driver. There are QoS issues
here - you do want your management frames to be encapsulated and pushed
onto the stack sooner than the (large, bursty) amount of data frames
that are queued. But there has to be a saner way to do this.
* Fragments are still broken - drivers need to be upgraded to an if_transmit()
implementation and then fragmentation handling needs to be properly fixed.
Tested:
* STA - AR5416, AR9280, Intel 5300 abgn wifi
* Hostap - AR5416, AR9160, AR9280
* Mesh - some testing by monthadar@, more to come.
2013-03-08 20:23:55 +00:00
|
|
|
ret = ieee80211_raw_output(vap, ni, m, ¶ms);
|
|
|
|
IEEE80211_TX_UNLOCK(ic);
|
|
|
|
return (ret);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
|
|
|
|
2009-09-22 18:18:14 +00:00
|
|
|
#define ADDSHORT(frm, v) do { \
|
|
|
|
frm[0] = (v) & 0xff; \
|
|
|
|
frm[1] = (v) >> 8; \
|
|
|
|
frm += 2; \
|
|
|
|
} while (0)
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
#define ADDWORD(frm, v) do { \
|
|
|
|
LE_WRITE_4(frm, v); \
|
|
|
|
frm += 4; \
|
|
|
|
} while (0)
|
|
|
|
/*
|
|
|
|
* Add a Mesh Path Request IE to a frame.
|
|
|
|
*/
|
2012-03-06 21:20:16 +00:00
|
|
|
#define PREQ_TFLAGS(n) preq->preq_targets[n].target_flags
|
|
|
|
#define PREQ_TADDR(n) preq->preq_targets[n].target_addr
|
|
|
|
#define PREQ_TSEQ(n) preq->preq_targets[n].target_seq
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
static uint8_t *
|
|
|
|
hwmp_add_meshpreq(uint8_t *frm, const struct ieee80211_meshpreq_ie *preq)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
*frm++ = IEEE80211_ELEMID_MESHPREQ;
|
2012-03-06 21:20:16 +00:00
|
|
|
*frm++ = preq->preq_len; /* len already calculated */
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
*frm++ = preq->preq_flags;
|
|
|
|
*frm++ = preq->preq_hopcount;
|
|
|
|
*frm++ = preq->preq_ttl;
|
|
|
|
ADDWORD(frm, preq->preq_id);
|
|
|
|
IEEE80211_ADDR_COPY(frm, preq->preq_origaddr); frm += 6;
|
|
|
|
ADDWORD(frm, preq->preq_origseq);
|
2012-03-06 21:20:16 +00:00
|
|
|
if (preq->preq_flags & IEEE80211_MESHPREQ_FLAGS_AE) {
|
|
|
|
IEEE80211_ADDR_COPY(frm, preq->preq_orig_ext_addr);
|
|
|
|
frm += 6;
|
|
|
|
}
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
ADDWORD(frm, preq->preq_lifetime);
|
|
|
|
ADDWORD(frm, preq->preq_metric);
|
|
|
|
*frm++ = preq->preq_tcount;
|
|
|
|
for (i = 0; i < preq->preq_tcount; i++) {
|
2012-03-06 21:20:16 +00:00
|
|
|
*frm++ = PREQ_TFLAGS(i);
|
|
|
|
IEEE80211_ADDR_COPY(frm, PREQ_TADDR(i));
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
frm += 6;
|
2012-03-06 21:20:16 +00:00
|
|
|
ADDWORD(frm, PREQ_TSEQ(i));
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
|
|
|
return frm;
|
|
|
|
}
|
2012-03-06 21:20:16 +00:00
|
|
|
#undef PREQ_TFLAGS
|
|
|
|
#undef PREQ_TADDR
|
|
|
|
#undef PREQ_TSEQ
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Add a Mesh Path Reply IE to a frame.
|
|
|
|
*/
|
|
|
|
static uint8_t *
|
|
|
|
hwmp_add_meshprep(uint8_t *frm, const struct ieee80211_meshprep_ie *prep)
|
|
|
|
{
|
|
|
|
*frm++ = IEEE80211_ELEMID_MESHPREP;
|
2012-03-06 21:20:16 +00:00
|
|
|
*frm++ = prep->prep_len; /* len already calculated */
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
*frm++ = prep->prep_flags;
|
|
|
|
*frm++ = prep->prep_hopcount;
|
|
|
|
*frm++ = prep->prep_ttl;
|
|
|
|
IEEE80211_ADDR_COPY(frm, prep->prep_targetaddr); frm += 6;
|
|
|
|
ADDWORD(frm, prep->prep_targetseq);
|
2012-03-06 21:20:16 +00:00
|
|
|
if (prep->prep_flags & IEEE80211_MESHPREP_FLAGS_AE) {
|
|
|
|
IEEE80211_ADDR_COPY(frm, prep->prep_target_ext_addr);
|
|
|
|
frm += 6;
|
|
|
|
}
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
ADDWORD(frm, prep->prep_lifetime);
|
|
|
|
ADDWORD(frm, prep->prep_metric);
|
|
|
|
IEEE80211_ADDR_COPY(frm, prep->prep_origaddr); frm += 6;
|
|
|
|
ADDWORD(frm, prep->prep_origseq);
|
|
|
|
return frm;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Add a Mesh Path Error IE to a frame.
|
|
|
|
*/
|
2012-03-06 21:20:16 +00:00
|
|
|
#define PERR_DFLAGS(n) perr->perr_dests[n].dest_flags
|
|
|
|
#define PERR_DADDR(n) perr->perr_dests[n].dest_addr
|
|
|
|
#define PERR_DSEQ(n) perr->perr_dests[n].dest_seq
|
|
|
|
#define PERR_EXTADDR(n) perr->perr_dests[n].dest_ext_addr
|
|
|
|
#define PERR_DRCODE(n) perr->perr_dests[n].dest_rcode
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
static uint8_t *
|
|
|
|
hwmp_add_meshperr(uint8_t *frm, const struct ieee80211_meshperr_ie *perr)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
*frm++ = IEEE80211_ELEMID_MESHPERR;
|
2012-03-06 21:20:16 +00:00
|
|
|
*frm++ = perr->perr_len; /* len already calculated */
|
2009-09-22 18:18:14 +00:00
|
|
|
*frm++ = perr->perr_ttl;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
*frm++ = perr->perr_ndests;
|
|
|
|
for (i = 0; i < perr->perr_ndests; i++) {
|
2012-03-06 21:20:16 +00:00
|
|
|
*frm++ = PERR_DFLAGS(i);
|
|
|
|
IEEE80211_ADDR_COPY(frm, PERR_DADDR(i));
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
frm += 6;
|
2012-03-06 21:20:16 +00:00
|
|
|
ADDWORD(frm, PERR_DSEQ(i));
|
|
|
|
if (PERR_DFLAGS(i) & IEEE80211_MESHPERR_FLAGS_AE) {
|
|
|
|
IEEE80211_ADDR_COPY(frm, PERR_EXTADDR(i));
|
|
|
|
frm += 6;
|
|
|
|
}
|
|
|
|
ADDSHORT(frm, PERR_DRCODE(i));
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
|
|
|
return frm;
|
|
|
|
}
|
2012-03-06 21:20:16 +00:00
|
|
|
#undef PERR_DFLAGS
|
|
|
|
#undef PERR_DADDR
|
|
|
|
#undef PERR_DSEQ
|
|
|
|
#undef PERR_EXTADDR
|
|
|
|
#undef PERR_DRCODE
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Add a Root Annoucement IE to a frame.
|
|
|
|
*/
|
|
|
|
static uint8_t *
|
|
|
|
hwmp_add_meshrann(uint8_t *frm, const struct ieee80211_meshrann_ie *rann)
|
|
|
|
{
|
|
|
|
*frm++ = IEEE80211_ELEMID_MESHRANN;
|
2012-03-06 21:20:16 +00:00
|
|
|
*frm++ = rann->rann_len;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
*frm++ = rann->rann_flags;
|
|
|
|
*frm++ = rann->rann_hopcount;
|
|
|
|
*frm++ = rann->rann_ttl;
|
|
|
|
IEEE80211_ADDR_COPY(frm, rann->rann_addr); frm += 6;
|
|
|
|
ADDWORD(frm, rann->rann_seq);
|
2012-03-06 21:20:16 +00:00
|
|
|
ADDWORD(frm, rann->rann_interval);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
ADDWORD(frm, rann->rann_metric);
|
|
|
|
return frm;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
hwmp_rootmode_setup(struct ieee80211vap *vap)
|
|
|
|
{
|
|
|
|
struct ieee80211_hwmp_state *hs = vap->iv_hwmp;
|
2013-02-07 21:23:43 +00:00
|
|
|
struct ieee80211_mesh_state *ms = vap->iv_mesh;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
|
|
|
switch (hs->hs_rootmode) {
|
|
|
|
case IEEE80211_HWMP_ROOTMODE_DISABLED:
|
|
|
|
callout_drain(&hs->hs_roottimer);
|
2013-02-07 21:23:43 +00:00
|
|
|
ms->ms_flags &= ~IEEE80211_MESHFLAGS_ROOT;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
break;
|
|
|
|
case IEEE80211_HWMP_ROOTMODE_NORMAL:
|
|
|
|
case IEEE80211_HWMP_ROOTMODE_PROACTIVE:
|
2009-07-21 19:38:22 +00:00
|
|
|
callout_reset(&hs->hs_roottimer, ieee80211_hwmp_rootint,
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
hwmp_rootmode_cb, vap);
|
2013-02-07 21:23:43 +00:00
|
|
|
ms->ms_flags |= IEEE80211_MESHFLAGS_ROOT;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
break;
|
|
|
|
case IEEE80211_HWMP_ROOTMODE_RANN:
|
2009-07-21 19:38:22 +00:00
|
|
|
callout_reset(&hs->hs_roottimer, ieee80211_hwmp_rannint,
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
hwmp_rootmode_rann_cb, vap);
|
2013-02-07 21:23:43 +00:00
|
|
|
ms->ms_flags |= IEEE80211_MESHFLAGS_ROOT;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Send a broadcast Path Request to find all nodes on the mesh. We are
|
|
|
|
* called when the vap is configured as a HWMP root node.
|
|
|
|
*/
|
|
|
|
#define PREQ_TFLAGS(n) preq.preq_targets[n].target_flags
|
|
|
|
#define PREQ_TADDR(n) preq.preq_targets[n].target_addr
|
|
|
|
#define PREQ_TSEQ(n) preq.preq_targets[n].target_seq
|
|
|
|
static void
|
|
|
|
hwmp_rootmode_cb(void *arg)
|
|
|
|
{
|
|
|
|
struct ieee80211vap *vap = (struct ieee80211vap *)arg;
|
|
|
|
struct ieee80211_hwmp_state *hs = vap->iv_hwmp;
|
|
|
|
struct ieee80211_mesh_state *ms = vap->iv_mesh;
|
|
|
|
struct ieee80211_meshpreq_ie preq;
|
|
|
|
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, vap->iv_bss,
|
2009-07-20 19:12:08 +00:00
|
|
|
"%s", "send broadcast PREQ");
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
2012-07-31 07:31:47 +00:00
|
|
|
preq.preq_flags = 0;
|
2012-05-01 16:14:18 +00:00
|
|
|
if (ms->ms_flags & IEEE80211_MESHFLAGS_GATE)
|
|
|
|
preq.preq_flags |= IEEE80211_MESHPREQ_FLAGS_GATE;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
if (hs->hs_rootmode == IEEE80211_HWMP_ROOTMODE_PROACTIVE)
|
|
|
|
preq.preq_flags |= IEEE80211_MESHPREQ_FLAGS_PP;
|
|
|
|
preq.preq_hopcount = 0;
|
|
|
|
preq.preq_ttl = ms->ms_ttl;
|
|
|
|
preq.preq_id = ++hs->hs_preqid;
|
|
|
|
IEEE80211_ADDR_COPY(preq.preq_origaddr, vap->iv_myaddr);
|
|
|
|
preq.preq_origseq = ++hs->hs_seq;
|
2009-07-21 19:38:22 +00:00
|
|
|
preq.preq_lifetime = ticks_to_msecs(ieee80211_hwmp_roottimeout);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
preq.preq_metric = IEEE80211_MESHLMETRIC_INITIALVAL;
|
|
|
|
preq.preq_tcount = 1;
|
|
|
|
IEEE80211_ADDR_COPY(PREQ_TADDR(0), broadcastaddr);
|
2012-05-01 16:08:46 +00:00
|
|
|
PREQ_TFLAGS(0) = IEEE80211_MESHPREQ_TFLAGS_TO |
|
|
|
|
IEEE80211_MESHPREQ_TFLAGS_USN;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
PREQ_TSEQ(0) = 0;
|
|
|
|
vap->iv_stats.is_hwmp_rootreqs++;
|
2013-02-07 21:26:40 +00:00
|
|
|
/* NB: we enforce rate check ourself */
|
|
|
|
hwmp_send_preq(vap, broadcastaddr, &preq, NULL, NULL);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
hwmp_rootmode_setup(vap);
|
|
|
|
}
|
|
|
|
#undef PREQ_TFLAGS
|
|
|
|
#undef PREQ_TADDR
|
|
|
|
#undef PREQ_TSEQ
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Send a Root Annoucement (RANN) to find all the nodes on the mesh. We are
|
|
|
|
* called when the vap is configured as a HWMP RANN root node.
|
|
|
|
*/
|
|
|
|
static void
|
|
|
|
hwmp_rootmode_rann_cb(void *arg)
|
|
|
|
{
|
|
|
|
struct ieee80211vap *vap = (struct ieee80211vap *)arg;
|
|
|
|
struct ieee80211_hwmp_state *hs = vap->iv_hwmp;
|
|
|
|
struct ieee80211_mesh_state *ms = vap->iv_mesh;
|
|
|
|
struct ieee80211_meshrann_ie rann;
|
|
|
|
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, vap->iv_bss,
|
2009-07-20 19:12:08 +00:00
|
|
|
"%s", "send broadcast RANN");
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
2009-10-22 17:30:22 +00:00
|
|
|
rann.rann_flags = 0;
|
2012-05-01 16:14:18 +00:00
|
|
|
if (ms->ms_flags & IEEE80211_MESHFLAGS_GATE)
|
|
|
|
rann.rann_flags |= IEEE80211_MESHFLAGS_GATE;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
rann.rann_hopcount = 0;
|
|
|
|
rann.rann_ttl = ms->ms_ttl;
|
|
|
|
IEEE80211_ADDR_COPY(rann.rann_addr, vap->iv_myaddr);
|
|
|
|
rann.rann_seq = ++hs->hs_seq;
|
2012-05-01 16:13:22 +00:00
|
|
|
rann.rann_interval = ieee80211_hwmp_rannint;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
rann.rann_metric = IEEE80211_MESHLMETRIC_INITIALVAL;
|
|
|
|
|
|
|
|
vap->iv_stats.is_hwmp_rootrann++;
|
2013-02-07 21:26:40 +00:00
|
|
|
hwmp_send_rann(vap, broadcastaddr, &rann);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
hwmp_rootmode_setup(vap);
|
|
|
|
}
|
|
|
|
|
2013-02-07 21:31:37 +00:00
|
|
|
/*
|
|
|
|
* Update forwarding information to TA if metric improves.
|
|
|
|
*/
|
|
|
|
static void
|
|
|
|
hwmp_update_transmitter(struct ieee80211vap *vap, struct ieee80211_node *ni,
|
|
|
|
const char *hwmp_frame)
|
|
|
|
{
|
|
|
|
struct ieee80211_mesh_state *ms = vap->iv_mesh;
|
|
|
|
struct ieee80211_mesh_route *rttran = NULL; /* Transmitter */
|
|
|
|
int metric = 0;
|
|
|
|
|
|
|
|
rttran = ieee80211_mesh_rt_find(vap, ni->ni_macaddr);
|
|
|
|
if (rttran == NULL) {
|
|
|
|
rttran = ieee80211_mesh_rt_add(vap, ni->ni_macaddr);
|
|
|
|
if (rttran == NULL) {
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
|
|
|
"unable to add path to transmitter %6D of %s",
|
|
|
|
ni->ni_macaddr, ":", hwmp_frame);
|
|
|
|
vap->iv_stats.is_mesh_rtaddfailed++;
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
metric = ms->ms_pmetric->mpm_metric(ni);
|
|
|
|
if (!(rttran->rt_flags & IEEE80211_MESHRT_FLAGS_VALID) ||
|
|
|
|
rttran->rt_metric > metric)
|
|
|
|
{
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
|
|
|
"%s path to transmiter %6D of %s, metric %d:%d",
|
|
|
|
rttran->rt_flags & IEEE80211_MESHRT_FLAGS_VALID ?
|
|
|
|
"prefer" : "update", ni->ni_macaddr, ":", hwmp_frame,
|
|
|
|
rttran->rt_metric, metric);
|
|
|
|
IEEE80211_ADDR_COPY(rttran->rt_nexthop, ni->ni_macaddr);
|
|
|
|
rttran->rt_metric = metric;
|
|
|
|
rttran->rt_nhops = 1;
|
|
|
|
ieee80211_mesh_rt_update(rttran, ms->ms_ppath->mpp_inact);
|
|
|
|
rttran->rt_flags = IEEE80211_MESHRT_FLAGS_VALID;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
#define PREQ_TFLAGS(n) preq->preq_targets[n].target_flags
|
|
|
|
#define PREQ_TADDR(n) preq->preq_targets[n].target_addr
|
|
|
|
#define PREQ_TSEQ(n) preq->preq_targets[n].target_seq
|
|
|
|
static void
|
|
|
|
hwmp_recv_preq(struct ieee80211vap *vap, struct ieee80211_node *ni,
|
|
|
|
const struct ieee80211_frame *wh, const struct ieee80211_meshpreq_ie *preq)
|
|
|
|
{
|
|
|
|
struct ieee80211_mesh_state *ms = vap->iv_mesh;
|
2009-07-27 14:22:09 +00:00
|
|
|
struct ieee80211_mesh_route *rtorig = NULL;
|
2012-05-01 16:10:32 +00:00
|
|
|
struct ieee80211_mesh_route *rtorig_ext = NULL;
|
2012-01-21 00:42:28 +00:00
|
|
|
struct ieee80211_mesh_route *rttarg = NULL;
|
|
|
|
struct ieee80211_hwmp_route *hrorig = NULL;
|
|
|
|
struct ieee80211_hwmp_route *hrtarg = NULL;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
struct ieee80211_hwmp_state *hs = vap->iv_hwmp;
|
|
|
|
struct ieee80211_meshprep_ie prep;
|
2012-05-01 16:10:32 +00:00
|
|
|
ieee80211_hwmp_seq preqid; /* last seen preqid for orig */
|
2012-07-31 07:36:27 +00:00
|
|
|
uint32_t metric = 0;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Ignore PREQs from us. Could happen because someone forward it
|
|
|
|
* back to us.
|
|
|
|
*/
|
|
|
|
if (IEEE80211_ADDR_EQ(vap->iv_myaddr, preq->preq_origaddr))
|
|
|
|
return;
|
|
|
|
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
2012-05-01 16:02:31 +00:00
|
|
|
"received PREQ, orig %6D, targ(0) %6D", preq->preq_origaddr, ":",
|
|
|
|
PREQ_TADDR(0), ":");
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
|
|
|
/*
|
2012-05-01 16:09:44 +00:00
|
|
|
* Acceptance criteria: (if the PREQ is not for us or not broadcast,
|
|
|
|
* or an external mac address not proxied by us),
|
2012-01-21 00:42:28 +00:00
|
|
|
* AND forwarding is disabled, discard this PREQ.
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
*/
|
2012-05-01 16:09:44 +00:00
|
|
|
rttarg = ieee80211_mesh_rt_find(vap, PREQ_TADDR(0));
|
|
|
|
if (!(ms->ms_flags & IEEE80211_MESHFLAGS_FWD) &&
|
|
|
|
(!IEEE80211_ADDR_EQ(vap->iv_myaddr, PREQ_TADDR(0)) ||
|
|
|
|
!IEEE80211_IS_MULTICAST(PREQ_TADDR(0)) ||
|
|
|
|
(rttarg != NULL &&
|
|
|
|
rttarg->rt_flags & IEEE80211_MESHRT_FLAGS_PROXY &&
|
|
|
|
IEEE80211_ADDR_EQ(vap->iv_myaddr, rttarg->rt_mesh_gate)))) {
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_HWMP,
|
|
|
|
preq->preq_origaddr, NULL, "%s", "not accepting PREQ");
|
|
|
|
return;
|
|
|
|
}
|
2012-01-21 00:42:28 +00:00
|
|
|
/*
|
|
|
|
* Acceptance criteria: if unicast addressed
|
|
|
|
* AND no valid forwarding for Target of PREQ, discard this PREQ.
|
|
|
|
*/
|
|
|
|
if(rttarg != NULL)
|
|
|
|
hrtarg = IEEE80211_MESH_ROUTE_PRIV(rttarg,
|
|
|
|
struct ieee80211_hwmp_route);
|
|
|
|
/* Address mode: ucast */
|
2012-07-31 07:31:47 +00:00
|
|
|
if(preq->preq_flags & IEEE80211_MESHPREQ_FLAGS_AM &&
|
2012-01-21 00:42:28 +00:00
|
|
|
rttarg == NULL &&
|
|
|
|
!IEEE80211_ADDR_EQ(vap->iv_myaddr, PREQ_TADDR(0))) {
|
|
|
|
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_HWMP,
|
|
|
|
preq->preq_origaddr, NULL,
|
|
|
|
"unicast addressed PREQ of unknown target %6D",
|
|
|
|
PREQ_TADDR(0), ":");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* PREQ ACCEPTED */
|
|
|
|
|
2009-07-27 14:22:09 +00:00
|
|
|
rtorig = ieee80211_mesh_rt_find(vap, preq->preq_origaddr);
|
2012-01-21 00:42:28 +00:00
|
|
|
if (rtorig == NULL) {
|
2009-07-27 14:22:09 +00:00
|
|
|
rtorig = ieee80211_mesh_rt_add(vap, preq->preq_origaddr);
|
2012-05-01 16:10:32 +00:00
|
|
|
if (rtorig == NULL) {
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
|
|
|
"unable to add orig path to %6D",
|
|
|
|
preq->preq_origaddr, ":");
|
|
|
|
vap->iv_stats.is_mesh_rtaddfailed++;
|
|
|
|
return;
|
|
|
|
}
|
2012-01-21 00:42:28 +00:00
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
|
|
|
"adding originator %6D", preq->preq_origaddr, ":");
|
|
|
|
}
|
2009-07-27 14:22:09 +00:00
|
|
|
hrorig = IEEE80211_MESH_ROUTE_PRIV(rtorig, struct ieee80211_hwmp_route);
|
2012-01-21 00:42:28 +00:00
|
|
|
|
2012-05-01 16:10:32 +00:00
|
|
|
/* record last seen preqid */
|
|
|
|
preqid = hrorig->hr_preqid;
|
|
|
|
hrorig->hr_preqid = HWMP_SEQ_MAX(hrorig->hr_preqid, preq->preq_id);
|
|
|
|
|
2012-01-21 00:42:28 +00:00
|
|
|
/* Data creation and update of forwarding information
|
|
|
|
* according to Table 11C-8 for originator mesh STA.
|
2009-07-27 14:22:09 +00:00
|
|
|
*/
|
2012-07-31 07:36:27 +00:00
|
|
|
metric = preq->preq_metric + ms->ms_pmetric->mpm_metric(ni);
|
2012-05-01 15:47:30 +00:00
|
|
|
if (HWMP_SEQ_GT(preq->preq_origseq, hrorig->hr_seq) ||
|
2012-01-21 00:42:28 +00:00
|
|
|
(HWMP_SEQ_EQ(preq->preq_origseq, hrorig->hr_seq) &&
|
2012-07-31 07:36:27 +00:00
|
|
|
metric < rtorig->rt_metric)) {
|
2012-01-21 00:42:28 +00:00
|
|
|
hrorig->hr_seq = preq->preq_origseq;
|
|
|
|
IEEE80211_ADDR_COPY(rtorig->rt_nexthop, wh->i_addr2);
|
2012-07-31 07:36:27 +00:00
|
|
|
rtorig->rt_metric = metric;
|
2012-01-21 00:42:28 +00:00
|
|
|
rtorig->rt_nhops = preq->preq_hopcount + 1;
|
2012-05-01 15:47:30 +00:00
|
|
|
ieee80211_mesh_rt_update(rtorig, preq->preq_lifetime);
|
2013-02-07 21:17:35 +00:00
|
|
|
/* Path to orig is valid now.
|
|
|
|
* NB: we know it can't be Proxy, and if it is GATE
|
|
|
|
* it will be marked below.
|
|
|
|
*/
|
|
|
|
rtorig->rt_flags = IEEE80211_MESHRT_FLAGS_VALID;
|
2013-02-07 21:29:14 +00:00
|
|
|
} else if ((hrtarg != NULL &&
|
|
|
|
!HWMP_SEQ_EQ(hrtarg->hr_seq, PREQ_TSEQ(0))) ||
|
|
|
|
(rtorig->rt_flags & IEEE80211_MESHRT_FLAGS_VALID &&
|
|
|
|
preqid >= preq->preq_id)) {
|
2009-07-27 14:22:09 +00:00
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
2012-05-01 16:10:32 +00:00
|
|
|
"discard PREQ from %6D, old seqno %u <= %u,"
|
|
|
|
" or old preqid %u < %u",
|
2012-01-21 00:38:18 +00:00
|
|
|
preq->preq_origaddr, ":",
|
2012-05-01 16:10:32 +00:00
|
|
|
preq->preq_origseq, hrorig->hr_seq,
|
|
|
|
preq->preq_id, preqid);
|
2009-07-27 14:22:09 +00:00
|
|
|
return;
|
|
|
|
}
|
2012-01-21 00:42:28 +00:00
|
|
|
|
2013-02-07 21:31:37 +00:00
|
|
|
/* Update forwarding information to TA if metric improves. */
|
|
|
|
hwmp_update_transmitter(vap, ni, "PREQ");
|
2009-07-27 14:22:09 +00:00
|
|
|
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
/*
|
|
|
|
* Check if the PREQ is addressed to us.
|
2013-02-07 21:27:40 +00:00
|
|
|
* or a Proxy currently gated by us.
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
*/
|
2012-05-01 15:56:26 +00:00
|
|
|
if (IEEE80211_ADDR_EQ(vap->iv_myaddr, PREQ_TADDR(0)) ||
|
2013-02-07 21:27:40 +00:00
|
|
|
(ms->ms_flags & IEEE80211_MESHFLAGS_GATE &&
|
|
|
|
rttarg != NULL &&
|
|
|
|
IEEE80211_ADDR_EQ(vap->iv_myaddr, rttarg->rt_mesh_gate) &&
|
2012-05-01 15:56:26 +00:00
|
|
|
rttarg->rt_flags & IEEE80211_MESHRT_FLAGS_PROXY &&
|
|
|
|
rttarg->rt_flags & IEEE80211_MESHRT_FLAGS_VALID)) {
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
/*
|
2012-05-01 15:56:26 +00:00
|
|
|
* When we are the target we shall update our own HWMP seq
|
|
|
|
* number with max of (current and preq->seq) + 1
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
*/
|
2012-05-01 15:56:26 +00:00
|
|
|
hs->hs_seq = HWMP_SEQ_MAX(hs->hs_seq, PREQ_TSEQ(0)) + 1;
|
|
|
|
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
prep.prep_flags = 0;
|
2012-07-31 07:31:47 +00:00
|
|
|
prep.prep_hopcount = 0;
|
2013-02-07 21:27:40 +00:00
|
|
|
prep.prep_metric = IEEE80211_MESHLMETRIC_INITIALVAL;
|
2012-07-31 07:31:47 +00:00
|
|
|
IEEE80211_ADDR_COPY(prep.prep_targetaddr, vap->iv_myaddr);
|
2012-05-01 15:56:26 +00:00
|
|
|
if (rttarg != NULL && /* if NULL it means we are the target */
|
|
|
|
rttarg->rt_flags & IEEE80211_MESHRT_FLAGS_PROXY) {
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
|
|
|
"reply for proxy %6D", rttarg->rt_dest, ":");
|
|
|
|
prep.prep_flags |= IEEE80211_MESHPREP_FLAGS_AE;
|
|
|
|
IEEE80211_ADDR_COPY(prep.prep_target_ext_addr,
|
|
|
|
rttarg->rt_dest);
|
|
|
|
/* update proxy seqno to HWMP seqno */
|
|
|
|
rttarg->rt_ext_seq = hs->hs_seq;
|
2012-07-31 07:31:47 +00:00
|
|
|
prep.prep_hopcount = rttarg->rt_nhops;
|
2013-02-07 21:27:40 +00:00
|
|
|
prep.prep_metric = rttarg->rt_metric;
|
2012-07-31 07:31:47 +00:00
|
|
|
IEEE80211_ADDR_COPY(prep.prep_targetaddr, rttarg->rt_mesh_gate);
|
2012-05-01 15:56:26 +00:00
|
|
|
}
|
|
|
|
/*
|
|
|
|
* Build and send a PREP frame.
|
|
|
|
*/
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
prep.prep_ttl = ms->ms_ttl;
|
2012-05-01 15:56:26 +00:00
|
|
|
prep.prep_targetseq = hs->hs_seq;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
prep.prep_lifetime = preq->preq_lifetime;
|
2009-10-19 11:17:46 +00:00
|
|
|
IEEE80211_ADDR_COPY(prep.prep_origaddr, preq->preq_origaddr);
|
|
|
|
prep.prep_origseq = preq->preq_origseq;
|
2012-05-01 15:56:26 +00:00
|
|
|
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
|
|
|
"reply to %6D", preq->preq_origaddr, ":");
|
2013-02-07 21:26:40 +00:00
|
|
|
hwmp_send_prep(vap, wh->i_addr2, &prep);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
return;
|
|
|
|
}
|
2012-05-01 16:10:32 +00:00
|
|
|
/* we may update our proxy information for the orig external */
|
|
|
|
else if (preq->preq_flags & IEEE80211_MESHPREQ_FLAGS_AE) {
|
|
|
|
rtorig_ext =
|
|
|
|
ieee80211_mesh_rt_find(vap, preq->preq_orig_ext_addr);
|
|
|
|
if (rtorig_ext == NULL) {
|
|
|
|
rtorig_ext = ieee80211_mesh_rt_add(vap,
|
|
|
|
preq->preq_orig_ext_addr);
|
|
|
|
if (rtorig_ext == NULL) {
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
|
|
|
"unable to add orig ext proxy to %6D",
|
|
|
|
preq->preq_orig_ext_addr, ":");
|
|
|
|
vap->iv_stats.is_mesh_rtaddfailed++;
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
IEEE80211_ADDR_COPY(rtorig_ext->rt_mesh_gate,
|
|
|
|
preq->preq_origaddr);
|
|
|
|
}
|
|
|
|
rtorig_ext->rt_ext_seq = preq->preq_origseq;
|
|
|
|
ieee80211_mesh_rt_update(rtorig_ext, preq->preq_lifetime);
|
|
|
|
}
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
/*
|
|
|
|
* Proactive PREQ: reply with a proactive PREP to the
|
|
|
|
* root STA if requested.
|
|
|
|
*/
|
|
|
|
if (IEEE80211_ADDR_EQ(PREQ_TADDR(0), broadcastaddr) &&
|
2012-05-01 16:02:31 +00:00
|
|
|
(PREQ_TFLAGS(0) & IEEE80211_MESHPREQ_TFLAGS_TO)) {
|
2009-07-20 19:12:08 +00:00
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
2012-05-01 16:18:38 +00:00
|
|
|
"root mesh station @ %6D", preq->preq_origaddr, ":");
|
2009-07-20 19:12:08 +00:00
|
|
|
|
2013-02-07 21:24:52 +00:00
|
|
|
/* Check if root is a mesh gate, mark it */
|
|
|
|
if (preq->preq_flags & IEEE80211_MESHPREQ_FLAGS_GATE) {
|
|
|
|
struct ieee80211_mesh_gate_route *gr;
|
|
|
|
|
|
|
|
rtorig->rt_flags |= IEEE80211_MESHRT_FLAGS_GATE;
|
|
|
|
gr = ieee80211_mesh_mark_gate(vap, preq->preq_origaddr,
|
|
|
|
rtorig);
|
|
|
|
gr->gr_lastseq = 0; /* NOT GANN */
|
|
|
|
}
|
|
|
|
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
/*
|
|
|
|
* Reply with a PREP if we don't have a path to the root
|
|
|
|
* or if the root sent us a proactive PREQ.
|
|
|
|
*/
|
2012-05-01 16:18:38 +00:00
|
|
|
if ((rtorig->rt_flags & IEEE80211_MESHRT_FLAGS_VALID) == 0 ||
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
(preq->preq_flags & IEEE80211_MESHPREQ_FLAGS_PP)) {
|
|
|
|
prep.prep_flags = 0;
|
|
|
|
prep.prep_hopcount = 0;
|
|
|
|
prep.prep_ttl = ms->ms_ttl;
|
2012-05-01 16:18:38 +00:00
|
|
|
IEEE80211_ADDR_COPY(prep.prep_origaddr,
|
|
|
|
preq->preq_origaddr);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
prep.prep_origseq = preq->preq_origseq;
|
|
|
|
prep.prep_lifetime = preq->preq_lifetime;
|
|
|
|
prep.prep_metric = IEEE80211_MESHLMETRIC_INITIALVAL;
|
2009-10-19 11:17:46 +00:00
|
|
|
IEEE80211_ADDR_COPY(prep.prep_targetaddr,
|
|
|
|
vap->iv_myaddr);
|
|
|
|
prep.prep_targetseq = ++hs->hs_seq;
|
2013-02-07 21:26:40 +00:00
|
|
|
hwmp_send_prep(vap, rtorig->rt_nexthop, &prep);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Forwarding and Intermediate reply for PREQs with 1 target.
|
|
|
|
*/
|
2012-05-01 16:10:32 +00:00
|
|
|
if ((preq->preq_tcount == 1) && (preq->preq_ttl > 1) &&
|
|
|
|
(ms->ms_flags & IEEE80211_MESHFLAGS_FWD)) {
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
struct ieee80211_meshpreq_ie ppreq; /* propagated PREQ */
|
|
|
|
|
|
|
|
memcpy(&ppreq, preq, sizeof(ppreq));
|
2012-05-01 16:10:32 +00:00
|
|
|
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
/*
|
|
|
|
* We have a valid route to this node.
|
2013-02-07 21:28:25 +00:00
|
|
|
* NB: if target is proxy dont reply.
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
*/
|
2012-05-01 16:03:27 +00:00
|
|
|
if (rttarg != NULL &&
|
2013-02-07 21:28:25 +00:00
|
|
|
rttarg->rt_flags & IEEE80211_MESHRT_FLAGS_VALID &&
|
|
|
|
!(rttarg->rt_flags & IEEE80211_MESHRT_FLAGS_PROXY)) {
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
/*
|
|
|
|
* Check if we can send an intermediate Path Reply,
|
2012-05-01 16:10:32 +00:00
|
|
|
* i.e., Target Only bit is not set and target is not
|
|
|
|
* the MAC broadcast address.
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
*/
|
2012-05-01 16:02:31 +00:00
|
|
|
if (!(PREQ_TFLAGS(0) & IEEE80211_MESHPREQ_TFLAGS_TO) &&
|
2012-05-01 16:10:32 +00:00
|
|
|
!IEEE80211_ADDR_EQ(PREQ_TADDR(0), broadcastaddr)) {
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
struct ieee80211_meshprep_ie prep;
|
|
|
|
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
2012-01-21 00:38:18 +00:00
|
|
|
"intermediate reply for PREQ from %6D",
|
|
|
|
preq->preq_origaddr, ":");
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
prep.prep_flags = 0;
|
2012-05-01 16:02:31 +00:00
|
|
|
prep.prep_hopcount = rttarg->rt_nhops;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
prep.prep_ttl = ms->ms_ttl;
|
|
|
|
IEEE80211_ADDR_COPY(&prep.prep_targetaddr,
|
2009-10-19 11:17:46 +00:00
|
|
|
PREQ_TADDR(0));
|
2012-05-01 16:02:31 +00:00
|
|
|
prep.prep_targetseq = hrtarg->hr_seq;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
prep.prep_lifetime = preq->preq_lifetime;
|
2012-05-01 16:02:31 +00:00
|
|
|
prep.prep_metric =rttarg->rt_metric;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
IEEE80211_ADDR_COPY(&prep.prep_origaddr,
|
2009-10-19 11:17:46 +00:00
|
|
|
preq->preq_origaddr);
|
2009-07-27 14:22:09 +00:00
|
|
|
prep.prep_origseq = hrorig->hr_seq;
|
2013-02-07 21:26:40 +00:00
|
|
|
hwmp_send_prep(vap, rtorig->rt_nexthop, &prep);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
2012-05-01 16:10:32 +00:00
|
|
|
/*
|
|
|
|
* Set TO and unset RF bits because we have
|
|
|
|
* sent a PREP.
|
|
|
|
*/
|
|
|
|
ppreq.preq_targets[0].target_flags |=
|
|
|
|
IEEE80211_MESHPREQ_TFLAGS_TO;
|
|
|
|
}
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
2012-05-01 16:10:32 +00:00
|
|
|
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
|
|
|
"forward PREQ from %6D",
|
|
|
|
preq->preq_origaddr, ":");
|
|
|
|
ppreq.preq_hopcount += 1;
|
|
|
|
ppreq.preq_ttl -= 1;
|
|
|
|
ppreq.preq_metric += ms->ms_pmetric->mpm_metric(ni);
|
|
|
|
|
|
|
|
/* don't do PREQ ratecheck when we propagate */
|
2013-02-07 21:26:40 +00:00
|
|
|
hwmp_send_preq(vap, broadcastaddr, &ppreq, NULL, NULL);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
#undef PREQ_TFLAGS
|
|
|
|
#undef PREQ_TADDR
|
|
|
|
#undef PREQ_TSEQ
|
|
|
|
|
|
|
|
static int
|
2013-02-07 21:26:40 +00:00
|
|
|
hwmp_send_preq(struct ieee80211vap *vap,
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
const uint8_t da[IEEE80211_ADDR_LEN],
|
2012-05-01 16:03:27 +00:00
|
|
|
struct ieee80211_meshpreq_ie *preq,
|
|
|
|
struct timeval *last, struct timeval *minint)
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
{
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Enforce PREQ interval.
|
2012-05-01 16:03:27 +00:00
|
|
|
* NB: Proactive ROOT PREQs rate is handled by cb task.
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
*/
|
2012-05-01 16:03:27 +00:00
|
|
|
if (last != NULL && minint != NULL) {
|
|
|
|
if (ratecheck(last, minint) == 0)
|
|
|
|
return EALREADY; /* XXX: we should postpone */
|
|
|
|
getmicrouptime(last);
|
|
|
|
}
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* mesh preq action frame format
|
|
|
|
* [6] da
|
2012-01-21 00:42:28 +00:00
|
|
|
* [6] sa
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
* [6] addr3 = sa
|
|
|
|
* [1] action
|
|
|
|
* [1] category
|
|
|
|
* [tlv] mesh path request
|
|
|
|
*/
|
|
|
|
preq->preq_ie = IEEE80211_ELEMID_MESHPREQ;
|
2012-03-06 21:20:16 +00:00
|
|
|
preq->preq_len = (preq->preq_flags & IEEE80211_MESHPREQ_FLAGS_AE ?
|
|
|
|
IEEE80211_MESHPREQ_BASE_SZ_AE : IEEE80211_MESHPREQ_BASE_SZ) +
|
|
|
|
preq->preq_tcount * IEEE80211_MESHPREQ_TRGT_SZ;
|
2013-02-07 21:26:40 +00:00
|
|
|
return hwmp_send_action(vap, da, (uint8_t *)preq, preq->preq_len+2);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
hwmp_recv_prep(struct ieee80211vap *vap, struct ieee80211_node *ni,
|
|
|
|
const struct ieee80211_frame *wh, const struct ieee80211_meshprep_ie *prep)
|
|
|
|
{
|
2012-05-01 16:02:31 +00:00
|
|
|
#define IS_PROXY(rt) (rt->rt_flags & IEEE80211_MESHRT_FLAGS_PROXY)
|
|
|
|
#define PROXIED_BY_US(rt) \
|
|
|
|
(IEEE80211_ADDR_EQ(vap->iv_myaddr, rt->rt_mesh_gate))
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
struct ieee80211_mesh_state *ms = vap->iv_mesh;
|
|
|
|
struct ieee80211_hwmp_state *hs = vap->iv_hwmp;
|
|
|
|
struct ieee80211_mesh_route *rt = NULL;
|
2012-05-01 15:56:26 +00:00
|
|
|
struct ieee80211_mesh_route *rtorig = NULL;
|
|
|
|
struct ieee80211_mesh_route *rtext = NULL;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
struct ieee80211_hwmp_route *hr;
|
|
|
|
struct ieee80211com *ic = vap->iv_ic;
|
|
|
|
struct mbuf *m, *next;
|
2012-01-21 00:42:28 +00:00
|
|
|
uint32_t metric = 0;
|
2012-05-01 15:56:26 +00:00
|
|
|
const uint8_t *addr;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
2012-05-01 16:02:31 +00:00
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
|
|
|
"received PREP, orig %6D, targ %6D", prep->prep_origaddr, ":",
|
|
|
|
prep->prep_targetaddr, ":");
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Acceptance criteria: (If the corresponding PREP was not generated
|
|
|
|
* by us OR not generated by an external mac that is not proxied by us)
|
|
|
|
* AND forwarding is disabled, discard this PREP.
|
|
|
|
*/
|
2012-05-01 15:56:26 +00:00
|
|
|
rtorig = ieee80211_mesh_rt_find(vap, prep->prep_origaddr);
|
2012-05-01 16:02:31 +00:00
|
|
|
if ((!IEEE80211_ADDR_EQ(vap->iv_myaddr, prep->prep_origaddr) ||
|
|
|
|
(rtorig != NULL && IS_PROXY(rtorig) && !PROXIED_BY_US(rtorig))) &&
|
|
|
|
!(ms->ms_flags & IEEE80211_MESHFLAGS_FWD)){
|
2012-05-01 15:56:26 +00:00
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
2012-05-01 16:02:31 +00:00
|
|
|
"discard PREP, orig(%6D) not proxied or generated by us",
|
|
|
|
prep->prep_origaddr, ":");
|
2012-05-01 15:56:26 +00:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* PREP ACCEPTED */
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
2009-07-27 14:22:09 +00:00
|
|
|
/*
|
2012-05-01 15:56:26 +00:00
|
|
|
* If accepted shall create or update the active forwarding information
|
|
|
|
* it maintains for the target mesh STA of the PREP (according to the
|
|
|
|
* rules defined in 13.10.8.4). If the conditions for creating or
|
|
|
|
* updating the forwarding information have not been met in those
|
|
|
|
* rules, no further steps are applied to the PREP.
|
2009-07-27 14:22:09 +00:00
|
|
|
*/
|
2012-05-01 15:56:26 +00:00
|
|
|
rt = ieee80211_mesh_rt_find(vap, prep->prep_targetaddr);
|
|
|
|
if (rt == NULL) {
|
|
|
|
rt = ieee80211_mesh_rt_add(vap, prep->prep_targetaddr);
|
|
|
|
if (rt == NULL) {
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
|
|
|
"unable to add PREP path to %6D",
|
|
|
|
prep->prep_targetaddr, ":");
|
|
|
|
vap->iv_stats.is_mesh_rtaddfailed++;
|
|
|
|
return;
|
|
|
|
}
|
2012-05-01 16:02:31 +00:00
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
|
|
|
"adding target %6D", prep->prep_targetaddr, ":");
|
2012-05-01 15:56:26 +00:00
|
|
|
}
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
hr = IEEE80211_MESH_ROUTE_PRIV(rt, struct ieee80211_hwmp_route);
|
2012-05-01 15:56:26 +00:00
|
|
|
/* update path metric */
|
|
|
|
metric = prep->prep_metric + ms->ms_pmetric->mpm_metric(ni);
|
2012-01-29 19:35:40 +00:00
|
|
|
if ((rt->rt_flags & IEEE80211_MESHRT_FLAGS_VALID)) {
|
|
|
|
if (HWMP_SEQ_LT(prep->prep_targetseq, hr->hr_seq)) {
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
|
|
|
"discard PREP from %6D, old seq no %u < %u",
|
|
|
|
prep->prep_targetaddr, ":",
|
|
|
|
prep->prep_targetseq, hr->hr_seq);
|
|
|
|
return;
|
|
|
|
} else if (HWMP_SEQ_LEQ(prep->prep_targetseq, hr->hr_seq) &&
|
2012-05-01 15:56:26 +00:00
|
|
|
metric > rt->rt_metric) {
|
2012-01-29 19:35:40 +00:00
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
|
|
|
"discard PREP from %6D, new metric %u > %u",
|
|
|
|
prep->prep_targetaddr, ":",
|
2012-07-31 08:05:40 +00:00
|
|
|
metric, rt->rt_metric);
|
2012-01-29 19:35:40 +00:00
|
|
|
return;
|
|
|
|
}
|
2009-07-27 14:22:09 +00:00
|
|
|
}
|
2012-01-21 00:42:28 +00:00
|
|
|
|
2012-05-01 15:56:26 +00:00
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
|
|
|
"%s path to %6D, hopcount %d:%d metric %d:%d",
|
|
|
|
rt->rt_flags & IEEE80211_MESHRT_FLAGS_VALID ?
|
|
|
|
"prefer" : "update",
|
|
|
|
prep->prep_targetaddr, ":",
|
2012-07-31 08:05:40 +00:00
|
|
|
rt->rt_nhops, prep->prep_hopcount + 1,
|
2012-05-01 15:56:26 +00:00
|
|
|
rt->rt_metric, metric);
|
|
|
|
|
2009-10-19 11:17:46 +00:00
|
|
|
hr->hr_seq = prep->prep_targetseq;
|
2012-05-01 16:05:09 +00:00
|
|
|
hr->hr_preqretries = 0;
|
2012-05-01 15:56:26 +00:00
|
|
|
IEEE80211_ADDR_COPY(rt->rt_nexthop, ni->ni_macaddr);
|
|
|
|
rt->rt_metric = metric;
|
|
|
|
rt->rt_nhops = prep->prep_hopcount + 1;
|
|
|
|
ieee80211_mesh_rt_update(rt, prep->prep_lifetime);
|
2012-05-01 16:18:38 +00:00
|
|
|
if (rt->rt_flags & IEEE80211_MESHRT_FLAGS_DISCOVER) {
|
|
|
|
/* discovery complete */
|
|
|
|
rt->rt_flags &= ~IEEE80211_MESHRT_FLAGS_DISCOVER;
|
|
|
|
}
|
|
|
|
rt->rt_flags |= IEEE80211_MESHRT_FLAGS_VALID; /* mark valid */
|
2012-05-01 15:56:26 +00:00
|
|
|
|
2013-02-07 21:31:37 +00:00
|
|
|
/* Update forwarding information to TA if metric improves */
|
|
|
|
hwmp_update_transmitter(vap, ni, "PREP");
|
|
|
|
|
2009-07-27 14:22:09 +00:00
|
|
|
/*
|
2012-05-01 16:02:31 +00:00
|
|
|
* If it's NOT for us, propagate the PREP
|
2009-07-27 14:22:09 +00:00
|
|
|
*/
|
2009-10-19 11:17:46 +00:00
|
|
|
if (!IEEE80211_ADDR_EQ(vap->iv_myaddr, prep->prep_origaddr) &&
|
2012-05-01 16:02:31 +00:00
|
|
|
prep->prep_ttl > 1 &&
|
|
|
|
prep->prep_hopcount < hs->hs_maxhops) {
|
2009-07-27 14:22:09 +00:00
|
|
|
struct ieee80211_meshprep_ie pprep; /* propagated PREP */
|
2012-05-01 16:02:31 +00:00
|
|
|
/*
|
|
|
|
* NB: We should already have setup the path to orig
|
|
|
|
* mesh STA when we propagated PREQ to target mesh STA,
|
|
|
|
* no PREP is generated without a corresponding PREQ.
|
|
|
|
* XXX: for now just ignore.
|
|
|
|
*/
|
|
|
|
if (rtorig == NULL) {
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
|
|
|
"received PREP for an unknown orig(%6D)",
|
|
|
|
prep->prep_origaddr, ":");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2009-07-27 14:22:09 +00:00
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
2012-01-21 00:38:18 +00:00
|
|
|
"propagate PREP from %6D",
|
|
|
|
prep->prep_targetaddr, ":");
|
2009-07-27 14:22:09 +00:00
|
|
|
|
|
|
|
memcpy(&pprep, prep, sizeof(pprep));
|
|
|
|
pprep.prep_hopcount += 1;
|
|
|
|
pprep.prep_ttl -= 1;
|
|
|
|
pprep.prep_metric += ms->ms_pmetric->mpm_metric(ni);
|
2013-02-07 21:26:40 +00:00
|
|
|
hwmp_send_prep(vap, rtorig->rt_nexthop, &pprep);
|
2012-05-01 15:56:26 +00:00
|
|
|
|
|
|
|
/* precursor list for the Target Mesh STA Address is updated */
|
2009-07-27 14:22:09 +00:00
|
|
|
}
|
2012-05-01 16:02:31 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Check if we received a PREP w/ AE and store target external address.
|
|
|
|
* We may store target external address if recevied PREP w/ AE
|
|
|
|
* and we are not final destination
|
|
|
|
*/
|
|
|
|
if (prep->prep_flags & IEEE80211_MESHPREP_FLAGS_AE) {
|
2012-05-01 15:56:26 +00:00
|
|
|
rtext = ieee80211_mesh_rt_find(vap,
|
|
|
|
prep->prep_target_ext_addr);
|
|
|
|
if (rtext == NULL) {
|
|
|
|
rtext = ieee80211_mesh_rt_add(vap,
|
|
|
|
prep->prep_target_ext_addr);
|
|
|
|
if (rtext == NULL) {
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
|
|
|
"unable to add PREP path to proxy %6D",
|
|
|
|
prep->prep_targetaddr, ":");
|
|
|
|
vap->iv_stats.is_mesh_rtaddfailed++;
|
|
|
|
return;
|
|
|
|
}
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
2012-05-01 15:56:26 +00:00
|
|
|
"%s path to %6D, hopcount %d:%d metric %d:%d",
|
|
|
|
rtext->rt_flags & IEEE80211_MESHRT_FLAGS_VALID ?
|
|
|
|
"prefer" : "update",
|
|
|
|
prep->prep_target_ext_addr, ":",
|
2012-07-31 08:05:40 +00:00
|
|
|
rtext->rt_nhops, prep->prep_hopcount + 1,
|
2012-05-01 15:56:26 +00:00
|
|
|
rtext->rt_metric, metric);
|
|
|
|
|
|
|
|
rtext->rt_flags = IEEE80211_MESHRT_FLAGS_PROXY |
|
|
|
|
IEEE80211_MESHRT_FLAGS_VALID;
|
|
|
|
IEEE80211_ADDR_COPY(rtext->rt_dest,
|
|
|
|
prep->prep_target_ext_addr);
|
|
|
|
IEEE80211_ADDR_COPY(rtext->rt_mesh_gate,
|
|
|
|
prep->prep_targetaddr);
|
|
|
|
IEEE80211_ADDR_COPY(rtext->rt_nexthop, wh->i_addr2);
|
|
|
|
rtext->rt_metric = metric;
|
|
|
|
rtext->rt_lifetime = prep->prep_lifetime;
|
|
|
|
rtext->rt_nhops = prep->prep_hopcount + 1;
|
2012-05-01 16:02:31 +00:00
|
|
|
rtext->rt_ext_seq = prep->prep_origseq; /* new proxy seq */
|
|
|
|
/*
|
|
|
|
* XXX: proxy entries have no HWMP priv data,
|
|
|
|
* nullify them to be sure?
|
|
|
|
*/
|
2012-01-21 00:42:28 +00:00
|
|
|
}
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
/*
|
|
|
|
* Check for frames queued awaiting path discovery.
|
|
|
|
* XXX probably can tell exactly and avoid remove call
|
|
|
|
* NB: hash may have false matches, if so they will get
|
|
|
|
* stuck back on the stageq because there won't be
|
|
|
|
* a path.
|
|
|
|
*/
|
2012-05-01 15:56:26 +00:00
|
|
|
addr = prep->prep_flags & IEEE80211_MESHPREP_FLAGS_AE ?
|
|
|
|
prep->prep_target_ext_addr : prep->prep_targetaddr;
|
2012-01-21 00:42:28 +00:00
|
|
|
m = ieee80211_ageq_remove(&ic->ic_stageq,
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
(struct ieee80211_node *)(uintptr_t)
|
2012-05-01 15:56:26 +00:00
|
|
|
ieee80211_mac_hash(ic, addr)); /* either dest or ext_dest */
|
Bring over my initial work from the net80211 TX locking branch.
This patchset implements a new TX lock, covering both the per-VAP (and
thus per-node) TX locking and the serialisation through to the underlying
physical device.
This implements the hard requirement that frames to the underlying physical
device are scheduled to the underlying device in the same order that they
are processed at the VAP layer. This includes adding extra encapsulation
state (such as sequence numbers and CCMP IV numbers.) Any order mismatch
here will result in dropped packets at the receiver.
There are multiple transmit contexts from the upper protocol layers as well
as the "raw" interface via the management and BPF transmit paths.
All of these need to be correctly serialised or bad behaviour will result
under load.
The specifics:
* add a new TX IC lock - it will eventually just be used for serialisation
to the underlying physical device but for now it's used for both the
VAP encapsulation/serialisation and the physical device dispatch.
This lock is specifically non-recursive.
* Methodize the parent transmit, vap transmit and ic_raw_xmit function
pointers; use lock assertions in the parent/vap transmit routines.
* Add a lock assertion in ieee80211_encap() - the TX lock must be held
here to guarantee sensible behaviour.
* Refactor out the packet sending code from ieee80211_start() - now
ieee80211_start() is just a loop over the ifnet queue and it dispatches
each VAP packet send through ieee80211_start_pkt().
Yes, I will likely rename ieee80211_start_pkt() to something that
better reflects its status as a VAP packet transmit path. More on
that later.
* Add locking around the management and BAR TX sending - to ensure that
encapsulation and TX are done hand-in-hand.
* Add locking in the mesh code - again, to ensure that encapsulation
and mesh transmit are done hand-in-hand.
* Add locking around the power save queue and ageq handling, when
dispatching to the parent interface.
* Add locking around the WDS handoff.
* Add a note in the mesh dispatch code that the TX path needs to be
re-thought-out - right now it's doing a direct parent device transmit
rather than going via the vap layer. It may "work", but it's likely
incorrect (as it bypasses any possible per-node power save and
aggregation handling.)
Why not a per-VAP or per-node lock?
Because in order to ensure per-VAP ordering, we'd have to hold the
VAP lock across parent->if_transmit(). There are a few problems
with this:
* There's some state being setup during each driver transmit - specifically,
the encryption encap / CCMP IV setup. That should eventually be dragged
back into the encapsulation phase but for now it lives in the driver TX path.
This should be locked.
* Two drivers (ath, iwn) re-use the node->ni_txseqs array in order to
allocate sequence numbers when doing transmit aggregation. This should
also be locked.
* Drivers may have multiple frames queued already - so when one calls
if_transmit(), it may end up dispatching multiple frames for different
VAPs/nodes, each needing a different lock when handling that particular
end destination.
So to be "correct" locking-wise, we'd end up needing to grab a VAP or
node lock inside the driver TX path when setting up crypto / AMPDU sequence
numbers, and we may already _have_ a TX lock held - mostly for the same
destination vap/node, but sometimes it'll be for others. That could lead
to LORs and thus deadlocks.
So for now, I'm sticking with an IC TX lock. It has the advantage of
papering over the above and it also has the added advantage that I can
assert that it's being held when doing a parent device transmit.
I'll look at splitting the locks out a bit more later on.
General outstanding net80211 TX path issues / TODO:
* Look into separating out the VAP serialisation and the IC handoff.
It's going to be tricky as parent->if_transmit() doesn't give me the
opportunity to split queuing from driver dispatch. See above.
* Work with monthadar to fix up the mesh transmit path so it doesn't go via
the parent interface when retransmitting frames.
* Push the encryption handling back into the driver, if it's at all
architectually sane to do so. I know it's possible - it's what mac80211
in Linux does.
* Make ieee80211_raw_xmit() queue a frame into VAP or parent queue rather
than doing a short-cut direct into the driver. There are QoS issues
here - you do want your management frames to be encapsulated and pushed
onto the stack sooner than the (large, bursty) amount of data frames
that are queued. But there has to be a saner way to do this.
* Fragments are still broken - drivers need to be upgraded to an if_transmit()
implementation and then fragmentation handling needs to be properly fixed.
Tested:
* STA - AR5416, AR9280, Intel 5300 abgn wifi
* Hostap - AR5416, AR9160, AR9280
* Mesh - some testing by monthadar@, more to come.
2013-03-08 20:23:55 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* All frames in the stageq here should be non-M_ENCAP; or things
|
|
|
|
* will get very unhappy.
|
|
|
|
*/
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
for (; m != NULL; m = next) {
|
|
|
|
next = m->m_nextpkt;
|
|
|
|
m->m_nextpkt = NULL;
|
2009-07-20 19:12:08 +00:00
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
|
|
|
"flush queued frame %p len %d", m, m->m_pkthdr.len);
|
2013-01-06 04:38:31 +00:00
|
|
|
/*
|
|
|
|
* If the mbuf has M_ENCAP set, ensure we free it.
|
|
|
|
* Note that after if_transmit() is called, m is invalid.
|
|
|
|
*/
|
2013-08-08 05:09:35 +00:00
|
|
|
(void) ieee80211_vap_xmitpkt(vap, m);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
2012-05-01 16:02:31 +00:00
|
|
|
#undef IS_PROXY
|
|
|
|
#undef PROXIED_BY_US
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
2013-02-07 21:26:40 +00:00
|
|
|
hwmp_send_prep(struct ieee80211vap *vap,
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
const uint8_t da[IEEE80211_ADDR_LEN],
|
|
|
|
struct ieee80211_meshprep_ie *prep)
|
|
|
|
{
|
2009-07-20 19:12:08 +00:00
|
|
|
/* NB: there's no PREP minimum interval. */
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* mesh prep action frame format
|
|
|
|
* [6] da
|
2012-01-21 00:42:28 +00:00
|
|
|
* [6] sa
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
* [6] addr3 = sa
|
|
|
|
* [1] action
|
|
|
|
* [1] category
|
|
|
|
* [tlv] mesh path reply
|
|
|
|
*/
|
|
|
|
prep->prep_ie = IEEE80211_ELEMID_MESHPREP;
|
2012-03-06 21:20:16 +00:00
|
|
|
prep->prep_len = prep->prep_flags & IEEE80211_MESHPREP_FLAGS_AE ?
|
|
|
|
IEEE80211_MESHPREP_BASE_SZ_AE : IEEE80211_MESHPREP_BASE_SZ;
|
2013-02-07 21:26:40 +00:00
|
|
|
return hwmp_send_action(vap, da, (uint8_t *)prep, prep->prep_len + 2);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
|
|
|
|
2009-09-22 18:18:14 +00:00
|
|
|
#define PERR_DFLAGS(n) perr.perr_dests[n].dest_flags
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
#define PERR_DADDR(n) perr.perr_dests[n].dest_addr
|
|
|
|
#define PERR_DSEQ(n) perr.perr_dests[n].dest_seq
|
2009-09-22 18:18:14 +00:00
|
|
|
#define PERR_DRCODE(n) perr.perr_dests[n].dest_rcode
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
static void
|
|
|
|
hwmp_peerdown(struct ieee80211_node *ni)
|
|
|
|
{
|
|
|
|
struct ieee80211vap *vap = ni->ni_vap;
|
2009-09-22 18:18:14 +00:00
|
|
|
struct ieee80211_mesh_state *ms = vap->iv_mesh;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
struct ieee80211_meshperr_ie perr;
|
|
|
|
struct ieee80211_mesh_route *rt;
|
|
|
|
struct ieee80211_hwmp_route *hr;
|
|
|
|
|
|
|
|
rt = ieee80211_mesh_rt_find(vap, ni->ni_macaddr);
|
|
|
|
if (rt == NULL)
|
|
|
|
return;
|
|
|
|
hr = IEEE80211_MESH_ROUTE_PRIV(rt, struct ieee80211_hwmp_route);
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
2009-07-20 19:12:08 +00:00
|
|
|
"%s", "delete route entry");
|
2009-09-22 18:18:14 +00:00
|
|
|
perr.perr_ttl = ms->ms_ttl;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
perr.perr_ndests = 1;
|
2009-10-19 23:11:43 +00:00
|
|
|
PERR_DFLAGS(0) = 0;
|
2009-09-22 18:18:14 +00:00
|
|
|
if (hr->hr_seq == 0)
|
|
|
|
PERR_DFLAGS(0) |= IEEE80211_MESHPERR_DFLAGS_USN;
|
|
|
|
PERR_DFLAGS(0) |= IEEE80211_MESHPERR_DFLAGS_RC;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
IEEE80211_ADDR_COPY(PERR_DADDR(0), rt->rt_dest);
|
2012-05-01 16:11:47 +00:00
|
|
|
PERR_DSEQ(0) = ++hr->hr_seq;
|
2009-09-22 18:18:14 +00:00
|
|
|
PERR_DRCODE(0) = IEEE80211_REASON_MESH_PERR_DEST_UNREACH;
|
2009-07-27 14:22:09 +00:00
|
|
|
/* NB: flush everything passing through peer */
|
|
|
|
ieee80211_mesh_rt_flush_peer(vap, ni->ni_macaddr);
|
2013-02-07 21:26:40 +00:00
|
|
|
hwmp_send_perr(vap, broadcastaddr, &perr);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
2009-09-22 18:18:14 +00:00
|
|
|
#undef PERR_DFLAGS
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
#undef PERR_DADDR
|
|
|
|
#undef PERR_DSEQ
|
2009-09-22 18:18:14 +00:00
|
|
|
#undef PERR_DRCODE
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
2012-05-01 16:11:47 +00:00
|
|
|
#define PERR_DFLAGS(n) perr->perr_dests[n].dest_flags
|
|
|
|
#define PERR_DADDR(n) perr->perr_dests[n].dest_addr
|
|
|
|
#define PERR_DSEQ(n) perr->perr_dests[n].dest_seq
|
|
|
|
#define PERR_DEXTADDR(n) perr->perr_dests[n].dest_ext_addr
|
|
|
|
#define PERR_DRCODE(n) perr->perr_dests[n].dest_rcode
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
static void
|
|
|
|
hwmp_recv_perr(struct ieee80211vap *vap, struct ieee80211_node *ni,
|
|
|
|
const struct ieee80211_frame *wh, const struct ieee80211_meshperr_ie *perr)
|
|
|
|
{
|
|
|
|
struct ieee80211_mesh_state *ms = vap->iv_mesh;
|
|
|
|
struct ieee80211_mesh_route *rt = NULL;
|
2012-05-01 16:11:47 +00:00
|
|
|
struct ieee80211_mesh_route *rt_ext = NULL;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
struct ieee80211_hwmp_route *hr;
|
2012-05-01 16:11:47 +00:00
|
|
|
struct ieee80211_meshperr_ie *pperr = NULL;
|
|
|
|
int i, j = 0, forward = 0;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
2012-05-01 16:11:47 +00:00
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
|
|
|
"received PERR from %6D", wh->i_addr2, ":");
|
|
|
|
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
/*
|
2012-05-01 16:11:47 +00:00
|
|
|
* if forwarding is true, prepare pperr
|
|
|
|
*/
|
|
|
|
if (ms->ms_flags & IEEE80211_MESHFLAGS_FWD) {
|
|
|
|
forward = 1;
|
2015-05-25 19:18:16 +00:00
|
|
|
pperr = IEEE80211_MALLOC(sizeof(*perr) + 31*sizeof(*perr->perr_dests),
|
|
|
|
M_80211_MESH_PERR, IEEE80211_M_NOWAIT); /* XXX: magic number, 32 err dests */
|
2012-05-01 16:11:47 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Acceptance criteria: check if we have forwarding information
|
|
|
|
* stored about destination, and that nexthop == TA of this PERR.
|
|
|
|
* NB: we also build a new PERR to propagate in case we should forward.
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
*/
|
|
|
|
for (i = 0; i < perr->perr_ndests; i++) {
|
|
|
|
rt = ieee80211_mesh_rt_find(vap, PERR_DADDR(i));
|
2013-02-07 21:19:44 +00:00
|
|
|
if (rt == NULL)
|
2012-05-01 16:11:47 +00:00
|
|
|
continue;
|
|
|
|
if (!IEEE80211_ADDR_EQ(rt->rt_nexthop, wh->i_addr2))
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
continue;
|
2012-05-01 16:11:47 +00:00
|
|
|
|
|
|
|
/* found and accepted a PERR ndest element, process it... */
|
|
|
|
if (forward)
|
|
|
|
memcpy(&pperr->perr_dests[j], &perr->perr_dests[i],
|
|
|
|
sizeof(*perr->perr_dests));
|
2009-09-22 18:18:14 +00:00
|
|
|
hr = IEEE80211_MESH_ROUTE_PRIV(rt, struct ieee80211_hwmp_route);
|
2012-05-01 16:11:47 +00:00
|
|
|
switch(PERR_DFLAGS(i)) {
|
|
|
|
case (IEEE80211_REASON_MESH_PERR_NO_FI):
|
|
|
|
if (PERR_DSEQ(i) == 0) {
|
|
|
|
hr->hr_seq++;
|
|
|
|
if (forward) {
|
|
|
|
pperr->perr_dests[j].dest_seq =
|
|
|
|
hr->hr_seq;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
hr->hr_seq = PERR_DSEQ(i);
|
|
|
|
}
|
|
|
|
rt->rt_flags &= ~IEEE80211_MESHRT_FLAGS_VALID;
|
|
|
|
j++;
|
|
|
|
break;
|
|
|
|
case (IEEE80211_REASON_MESH_PERR_DEST_UNREACH):
|
|
|
|
if(HWMP_SEQ_GT(PERR_DSEQ(i), hr->hr_seq)) {
|
|
|
|
hr->hr_seq = PERR_DSEQ(i);
|
|
|
|
rt->rt_flags &= ~IEEE80211_MESHRT_FLAGS_VALID;
|
|
|
|
j++;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case (IEEE80211_REASON_MESH_PERR_NO_PROXY):
|
|
|
|
rt_ext = ieee80211_mesh_rt_find(vap, PERR_DEXTADDR(i));
|
|
|
|
if (rt_ext != NULL) {
|
|
|
|
rt_ext->rt_flags &=
|
|
|
|
~IEEE80211_MESHRT_FLAGS_VALID;
|
|
|
|
j++;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
IEEE80211_DISCARD(vap, IEEE80211_MSG_HWMP, wh, NULL,
|
|
|
|
"PERR, unknown reason code %u\n", PERR_DFLAGS(i));
|
|
|
|
goto done; /* XXX: stats?? */
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
2013-02-07 21:30:58 +00:00
|
|
|
ieee80211_mesh_rt_flush_peer(vap, PERR_DADDR(i));
|
2012-05-01 16:11:47 +00:00
|
|
|
KASSERT(j < 32, ("PERR, error ndest >= 32 (%u)", j));
|
|
|
|
}
|
|
|
|
if (j == 0) {
|
|
|
|
IEEE80211_DISCARD(vap, IEEE80211_MSG_HWMP, wh, NULL, "%s",
|
|
|
|
"PERR not accepted");
|
|
|
|
goto done; /* XXX: stats?? */
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
2012-05-01 16:11:47 +00:00
|
|
|
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
/*
|
|
|
|
* Propagate the PERR if we previously found it on our routing table.
|
|
|
|
*/
|
2009-09-22 18:18:14 +00:00
|
|
|
if (forward && perr->perr_ttl > 1) {
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
2012-01-21 00:38:18 +00:00
|
|
|
"propagate PERR from %6D", wh->i_addr2, ":");
|
2012-05-01 16:11:47 +00:00
|
|
|
pperr->perr_ndests = j;
|
|
|
|
pperr->perr_ttl--;
|
2013-02-07 21:26:40 +00:00
|
|
|
hwmp_send_perr(vap, broadcastaddr, pperr);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
2012-05-01 16:11:47 +00:00
|
|
|
done:
|
|
|
|
if (pperr != NULL)
|
2015-05-25 19:18:16 +00:00
|
|
|
IEEE80211_FREE(pperr, M_80211_MESH_PERR);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
2012-03-06 21:20:16 +00:00
|
|
|
#undef PERR_DFLAGS
|
2012-05-01 16:12:39 +00:00
|
|
|
#undef PERR_DADDR
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
#undef PERR_DSEQ
|
2012-05-01 16:11:47 +00:00
|
|
|
#undef PERR_DEXTADDR
|
2012-03-06 21:20:16 +00:00
|
|
|
#undef PERR_DRCODE
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
|
|
|
static int
|
2013-02-07 21:26:40 +00:00
|
|
|
hwmp_send_perr(struct ieee80211vap *vap,
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
const uint8_t da[IEEE80211_ADDR_LEN],
|
|
|
|
struct ieee80211_meshperr_ie *perr)
|
|
|
|
{
|
2013-02-07 21:26:40 +00:00
|
|
|
struct ieee80211_hwmp_state *hs = vap->iv_hwmp;
|
2012-03-06 21:20:16 +00:00
|
|
|
int i;
|
|
|
|
uint8_t length = 0;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Enforce PERR interval.
|
|
|
|
*/
|
|
|
|
if (ratecheck(&hs->hs_lastperr, &ieee80211_hwmp_perrminint) == 0)
|
|
|
|
return EALREADY;
|
|
|
|
getmicrouptime(&hs->hs_lastperr);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* mesh perr action frame format
|
|
|
|
* [6] da
|
|
|
|
* [6] sa
|
|
|
|
* [6] addr3 = sa
|
|
|
|
* [1] action
|
|
|
|
* [1] category
|
|
|
|
* [tlv] mesh path error
|
|
|
|
*/
|
|
|
|
perr->perr_ie = IEEE80211_ELEMID_MESHPERR;
|
2012-03-06 21:20:16 +00:00
|
|
|
length = IEEE80211_MESHPERR_BASE_SZ;
|
|
|
|
for (i = 0; i<perr->perr_ndests; i++) {
|
|
|
|
if (perr->perr_dests[i].dest_flags &
|
|
|
|
IEEE80211_MESHPERR_FLAGS_AE) {
|
|
|
|
length += IEEE80211_MESHPERR_DEST_SZ_AE;
|
|
|
|
continue ;
|
|
|
|
}
|
|
|
|
length += IEEE80211_MESHPERR_DEST_SZ;
|
|
|
|
}
|
|
|
|
perr->perr_len =length;
|
2013-02-07 21:26:40 +00:00
|
|
|
return hwmp_send_action(vap, da, (uint8_t *)perr, perr->perr_len+2);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
|
|
|
|
2012-05-01 16:12:39 +00:00
|
|
|
/*
|
|
|
|
* Called from the rest of the net80211 code (mesh code for example).
|
|
|
|
* NB: IEEE80211_REASON_MESH_PERR_DEST_UNREACH can be trigger by the fact that
|
|
|
|
* a mesh STA is unable to forward an MSDU/MMPDU to a next-hop mesh STA.
|
|
|
|
*/
|
|
|
|
#define PERR_DFLAGS(n) perr.perr_dests[n].dest_flags
|
|
|
|
#define PERR_DADDR(n) perr.perr_dests[n].dest_addr
|
|
|
|
#define PERR_DSEQ(n) perr.perr_dests[n].dest_seq
|
|
|
|
#define PERR_DEXTADDR(n) perr.perr_dests[n].dest_ext_addr
|
|
|
|
#define PERR_DRCODE(n) perr.perr_dests[n].dest_rcode
|
|
|
|
static void
|
|
|
|
hwmp_senderror(struct ieee80211vap *vap,
|
|
|
|
const uint8_t addr[IEEE80211_ADDR_LEN],
|
|
|
|
struct ieee80211_mesh_route *rt, int rcode)
|
|
|
|
{
|
|
|
|
struct ieee80211_mesh_state *ms = vap->iv_mesh;
|
|
|
|
struct ieee80211_hwmp_route *hr = NULL;
|
|
|
|
struct ieee80211_meshperr_ie perr;
|
|
|
|
|
|
|
|
if (rt != NULL)
|
|
|
|
hr = IEEE80211_MESH_ROUTE_PRIV(rt,
|
|
|
|
struct ieee80211_hwmp_route);
|
|
|
|
|
|
|
|
perr.perr_ndests = 1;
|
|
|
|
perr.perr_ttl = ms->ms_ttl;
|
|
|
|
PERR_DFLAGS(0) = 0;
|
|
|
|
PERR_DRCODE(0) = rcode;
|
|
|
|
|
|
|
|
switch (rcode) {
|
|
|
|
case IEEE80211_REASON_MESH_PERR_NO_FI:
|
|
|
|
IEEE80211_ADDR_COPY(PERR_DADDR(0), addr);
|
|
|
|
PERR_DSEQ(0) = 0; /* reserved */
|
|
|
|
break;
|
|
|
|
case IEEE80211_REASON_MESH_PERR_NO_PROXY:
|
|
|
|
KASSERT(rt != NULL, ("no proxy info for sending PERR"));
|
|
|
|
KASSERT(rt->rt_flags & IEEE80211_MESHRT_FLAGS_PROXY,
|
|
|
|
("route is not marked proxy"));
|
|
|
|
PERR_DFLAGS(0) |= IEEE80211_MESHPERR_FLAGS_AE;
|
|
|
|
IEEE80211_ADDR_COPY(PERR_DADDR(0), vap->iv_myaddr);
|
|
|
|
PERR_DSEQ(0) = rt->rt_ext_seq;
|
|
|
|
IEEE80211_ADDR_COPY(PERR_DEXTADDR(0), addr);
|
|
|
|
break;
|
|
|
|
case IEEE80211_REASON_MESH_PERR_DEST_UNREACH:
|
|
|
|
KASSERT(rt != NULL, ("no route info for sending PERR"));
|
|
|
|
IEEE80211_ADDR_COPY(PERR_DADDR(0), addr);
|
|
|
|
PERR_DSEQ(0) = hr->hr_seq;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
KASSERT(0, ("unknown reason code for HWMP PERR (%u)", rcode));
|
|
|
|
}
|
2013-02-07 21:26:40 +00:00
|
|
|
hwmp_send_perr(vap, broadcastaddr, &perr);
|
2012-05-01 16:12:39 +00:00
|
|
|
}
|
|
|
|
#undef PERR_DFLAGS
|
|
|
|
#undef PEER_DADDR
|
|
|
|
#undef PERR_DSEQ
|
|
|
|
#undef PERR_DEXTADDR
|
|
|
|
#undef PERR_DRCODE
|
|
|
|
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
static void
|
|
|
|
hwmp_recv_rann(struct ieee80211vap *vap, struct ieee80211_node *ni,
|
|
|
|
const struct ieee80211_frame *wh, const struct ieee80211_meshrann_ie *rann)
|
|
|
|
{
|
|
|
|
struct ieee80211_mesh_state *ms = vap->iv_mesh;
|
|
|
|
struct ieee80211_hwmp_state *hs = vap->iv_hwmp;
|
|
|
|
struct ieee80211_mesh_route *rt = NULL;
|
|
|
|
struct ieee80211_hwmp_route *hr;
|
2012-05-01 16:13:22 +00:00
|
|
|
struct ieee80211_meshpreq_ie preq;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
struct ieee80211_meshrann_ie prann;
|
2012-05-01 16:13:22 +00:00
|
|
|
uint32_t metric = 0;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
2013-02-07 21:21:40 +00:00
|
|
|
if (IEEE80211_ADDR_EQ(rann->rann_addr, vap->iv_myaddr))
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
return;
|
|
|
|
|
|
|
|
rt = ieee80211_mesh_rt_find(vap, rann->rann_addr);
|
2012-05-01 16:13:22 +00:00
|
|
|
if (rt != NULL && rt->rt_flags & IEEE80211_MESHRT_FLAGS_VALID) {
|
|
|
|
hr = IEEE80211_MESH_ROUTE_PRIV(rt, struct ieee80211_hwmp_route);
|
|
|
|
|
|
|
|
/* Acceptance criteria: if RANN.seq < stored seq, discard RANN */
|
|
|
|
if (HWMP_SEQ_LT(rann->rann_seq, hr->hr_seq)) {
|
|
|
|
IEEE80211_DISCARD(vap, IEEE80211_MSG_HWMP, wh, NULL,
|
|
|
|
"RANN seq %u < %u", rann->rann_seq, hr->hr_seq);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Acceptance criteria: if RANN.seq == stored seq AND
|
|
|
|
* RANN.metric > stored metric, discard RANN */
|
|
|
|
if (HWMP_SEQ_EQ(rann->rann_seq, hr->hr_seq) &&
|
|
|
|
rann->rann_metric > rt->rt_metric) {
|
|
|
|
IEEE80211_DISCARD(vap, IEEE80211_MSG_HWMP, wh, NULL,
|
|
|
|
"RANN metric %u > %u", rann->rann_metric, rt->rt_metric);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* RANN ACCEPTED */
|
|
|
|
|
|
|
|
ieee80211_hwmp_rannint = rann->rann_interval; /* XXX: mtx lock? */
|
|
|
|
metric = rann->rann_metric + ms->ms_pmetric->mpm_metric(ni);
|
|
|
|
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
if (rt == NULL) {
|
2012-05-01 16:13:22 +00:00
|
|
|
rt = ieee80211_mesh_rt_add(vap, rann->rann_addr);
|
|
|
|
if (rt == NULL) {
|
|
|
|
IEEE80211_DISCARD(vap, IEEE80211_MSG_HWMP, wh, NULL,
|
|
|
|
"unable to add mac for RANN root %6D",
|
|
|
|
rann->rann_addr, ":");
|
|
|
|
vap->iv_stats.is_mesh_rtaddfailed++;
|
|
|
|
return;
|
|
|
|
}
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
|
|
|
hr = IEEE80211_MESH_ROUTE_PRIV(rt, struct ieee80211_hwmp_route);
|
2013-02-07 21:24:52 +00:00
|
|
|
/* Check if root is a mesh gate, mark it */
|
|
|
|
if (rann->rann_flags & IEEE80211_MESHRANN_FLAGS_GATE) {
|
|
|
|
struct ieee80211_mesh_gate_route *gr;
|
|
|
|
|
|
|
|
rt->rt_flags |= IEEE80211_MESHRT_FLAGS_GATE;
|
|
|
|
gr = ieee80211_mesh_mark_gate(vap, rann->rann_addr,
|
|
|
|
rt);
|
|
|
|
gr->gr_lastseq = 0; /* NOT GANN */
|
|
|
|
}
|
2012-05-01 16:13:22 +00:00
|
|
|
/* discovery timeout */
|
|
|
|
ieee80211_mesh_rt_update(rt,
|
|
|
|
ticks_to_msecs(ieee80211_hwmp_roottimeout));
|
|
|
|
|
|
|
|
preq.preq_flags = IEEE80211_MESHPREQ_FLAGS_AM;
|
|
|
|
preq.preq_hopcount = 0;
|
|
|
|
preq.preq_ttl = ms->ms_ttl;
|
|
|
|
preq.preq_id = 0; /* reserved */
|
|
|
|
IEEE80211_ADDR_COPY(preq.preq_origaddr, vap->iv_myaddr);
|
|
|
|
preq.preq_origseq = ++hs->hs_seq;
|
|
|
|
preq.preq_lifetime = ieee80211_hwmp_roottimeout;
|
|
|
|
preq.preq_metric = IEEE80211_MESHLMETRIC_INITIALVAL;
|
|
|
|
preq.preq_tcount = 1;
|
|
|
|
preq.preq_targets[0].target_flags = IEEE80211_MESHPREQ_TFLAGS_TO;
|
|
|
|
/* NB: IEEE80211_MESHPREQ_TFLAGS_USN = 0 implicitly implied */
|
|
|
|
IEEE80211_ADDR_COPY(preq.preq_targets[0].target_addr, rann->rann_addr);
|
|
|
|
preq.preq_targets[0].target_seq = rann->rann_seq;
|
|
|
|
/* XXX: if rootconfint have not passed, we built this preq in vain */
|
2013-02-07 21:26:40 +00:00
|
|
|
hwmp_send_preq(vap, wh->i_addr2, &preq, &hr->hr_lastrootconf,
|
|
|
|
&ieee80211_hwmp_rootconfint);
|
2012-05-01 16:13:22 +00:00
|
|
|
|
|
|
|
/* propagate a RANN */
|
|
|
|
if (rt->rt_flags & IEEE80211_MESHRT_FLAGS_VALID &&
|
|
|
|
rann->rann_ttl > 1 &&
|
|
|
|
ms->ms_flags & IEEE80211_MESHFLAGS_FWD) {
|
2009-10-29 12:19:10 +00:00
|
|
|
hr->hr_seq = rann->rann_seq;
|
2012-05-01 16:13:22 +00:00
|
|
|
memcpy(&prann, rann, sizeof(prann));
|
|
|
|
prann.rann_hopcount += 1;
|
|
|
|
prann.rann_ttl -= 1;
|
|
|
|
prann.rann_metric += ms->ms_pmetric->mpm_metric(ni);
|
2013-02-07 21:26:40 +00:00
|
|
|
hwmp_send_rann(vap, broadcastaddr, &prann);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
2013-02-07 21:26:40 +00:00
|
|
|
hwmp_send_rann(struct ieee80211vap *vap,
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
const uint8_t da[IEEE80211_ADDR_LEN],
|
|
|
|
struct ieee80211_meshrann_ie *rann)
|
|
|
|
{
|
|
|
|
/*
|
|
|
|
* mesh rann action frame format
|
|
|
|
* [6] da
|
2012-01-21 00:42:28 +00:00
|
|
|
* [6] sa
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
* [6] addr3 = sa
|
|
|
|
* [1] action
|
|
|
|
* [1] category
|
|
|
|
* [tlv] root annoucement
|
|
|
|
*/
|
|
|
|
rann->rann_ie = IEEE80211_ELEMID_MESHRANN;
|
2012-03-06 21:20:16 +00:00
|
|
|
rann->rann_len = IEEE80211_MESHRANN_BASE_SZ;
|
2013-02-07 21:26:40 +00:00
|
|
|
return hwmp_send_action(vap, da, (uint8_t *)rann, rann->rann_len + 2);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
#define PREQ_TFLAGS(n) preq.preq_targets[n].target_flags
|
|
|
|
#define PREQ_TADDR(n) preq.preq_targets[n].target_addr
|
|
|
|
#define PREQ_TSEQ(n) preq.preq_targets[n].target_seq
|
2012-05-01 16:16:20 +00:00
|
|
|
static void
|
|
|
|
hwmp_rediscover_cb(void *arg)
|
|
|
|
{
|
|
|
|
struct ieee80211_mesh_route *rt = arg;
|
|
|
|
struct ieee80211vap *vap = rt->rt_vap;
|
|
|
|
struct ieee80211_hwmp_state *hs = vap->iv_hwmp;
|
|
|
|
struct ieee80211_mesh_state *ms = vap->iv_mesh;
|
|
|
|
struct ieee80211_hwmp_route *hr;
|
|
|
|
struct ieee80211_meshpreq_ie preq; /* Optimize: storing first preq? */
|
|
|
|
|
|
|
|
if ((rt->rt_flags & IEEE80211_MESHRT_FLAGS_VALID))
|
|
|
|
return ; /* nothing to do */
|
|
|
|
|
|
|
|
hr = IEEE80211_MESH_ROUTE_PRIV(rt, struct ieee80211_hwmp_route);
|
|
|
|
if (hr->hr_preqretries >=
|
|
|
|
ieee80211_hwmp_maxpreq_retries) {
|
2013-02-07 21:25:32 +00:00
|
|
|
IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_ANY,
|
|
|
|
rt->rt_dest, "%s",
|
|
|
|
"max number of discovery, send queued frames to GATE");
|
|
|
|
ieee80211_mesh_forward_to_gates(vap, rt);
|
2012-05-01 16:16:20 +00:00
|
|
|
vap->iv_stats.is_mesh_fwd_nopath++;
|
|
|
|
return ; /* XXX: flush queue? */
|
|
|
|
}
|
|
|
|
|
|
|
|
hr->hr_preqretries++;
|
|
|
|
|
|
|
|
|
|
|
|
IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_HWMP, rt->rt_dest,
|
|
|
|
"start path rediscovery , target seq %u", hr->hr_seq);
|
|
|
|
/*
|
|
|
|
* Try to discover the path for this node.
|
|
|
|
* Group addressed PREQ Case A
|
|
|
|
*/
|
|
|
|
preq.preq_flags = 0;
|
|
|
|
preq.preq_hopcount = 0;
|
|
|
|
preq.preq_ttl = ms->ms_ttl;
|
|
|
|
preq.preq_id = ++hs->hs_preqid;
|
|
|
|
IEEE80211_ADDR_COPY(preq.preq_origaddr, vap->iv_myaddr);
|
|
|
|
preq.preq_origseq = hr->hr_origseq;
|
|
|
|
preq.preq_lifetime = ticks_to_msecs(ieee80211_hwmp_pathtimeout);
|
|
|
|
preq.preq_metric = IEEE80211_MESHLMETRIC_INITIALVAL;
|
|
|
|
preq.preq_tcount = 1;
|
|
|
|
IEEE80211_ADDR_COPY(PREQ_TADDR(0), rt->rt_dest);
|
|
|
|
PREQ_TFLAGS(0) = 0;
|
|
|
|
if (ieee80211_hwmp_targetonly)
|
|
|
|
PREQ_TFLAGS(0) |= IEEE80211_MESHPREQ_TFLAGS_TO;
|
|
|
|
PREQ_TFLAGS(0) |= IEEE80211_MESHPREQ_TFLAGS_USN;
|
|
|
|
PREQ_TSEQ(0) = 0; /* RESERVED when USN flag is set */
|
|
|
|
/* XXX check return value */
|
2013-02-07 21:26:40 +00:00
|
|
|
hwmp_send_preq(vap, broadcastaddr, &preq, &hr->hr_lastpreq,
|
|
|
|
&ieee80211_hwmp_preqminint);
|
2012-05-01 16:16:20 +00:00
|
|
|
callout_reset(&rt->rt_discovery,
|
|
|
|
ieee80211_hwmp_net_diameter_traversaltime * 2,
|
|
|
|
hwmp_rediscover_cb, rt);
|
|
|
|
}
|
|
|
|
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
static struct ieee80211_node *
|
|
|
|
hwmp_discover(struct ieee80211vap *vap,
|
|
|
|
const uint8_t dest[IEEE80211_ADDR_LEN], struct mbuf *m)
|
|
|
|
{
|
|
|
|
struct ieee80211_hwmp_state *hs = vap->iv_hwmp;
|
|
|
|
struct ieee80211_mesh_state *ms = vap->iv_mesh;
|
|
|
|
struct ieee80211_mesh_route *rt = NULL;
|
|
|
|
struct ieee80211_hwmp_route *hr;
|
|
|
|
struct ieee80211_meshpreq_ie preq;
|
|
|
|
struct ieee80211_node *ni;
|
|
|
|
int sendpreq = 0;
|
|
|
|
|
|
|
|
KASSERT(vap->iv_opmode == IEEE80211_M_MBSS,
|
|
|
|
("not a mesh vap, opmode %d", vap->iv_opmode));
|
|
|
|
|
|
|
|
KASSERT(!IEEE80211_ADDR_EQ(vap->iv_myaddr, dest),
|
|
|
|
("%s: discovering self!", __func__));
|
|
|
|
|
|
|
|
ni = NULL;
|
|
|
|
if (!IEEE80211_IS_MULTICAST(dest)) {
|
|
|
|
rt = ieee80211_mesh_rt_find(vap, dest);
|
|
|
|
if (rt == NULL) {
|
|
|
|
rt = ieee80211_mesh_rt_add(vap, dest);
|
|
|
|
if (rt == NULL) {
|
2009-07-20 19:12:08 +00:00
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP,
|
2012-01-21 00:38:18 +00:00
|
|
|
ni, "unable to add discovery path to %6D",
|
|
|
|
dest, ":");
|
2009-07-20 19:12:08 +00:00
|
|
|
vap->iv_stats.is_mesh_rtaddfailed++;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
goto done;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
hr = IEEE80211_MESH_ROUTE_PRIV(rt,
|
|
|
|
struct ieee80211_hwmp_route);
|
2013-02-07 21:25:32 +00:00
|
|
|
if (rt->rt_flags & IEEE80211_MESHRT_FLAGS_DISCOVER) {
|
|
|
|
IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_HWMP, dest,
|
|
|
|
"%s", "already discovering queue frame until path found");
|
|
|
|
sendpreq = 1;
|
|
|
|
goto done;
|
|
|
|
}
|
2009-07-20 19:12:08 +00:00
|
|
|
if ((rt->rt_flags & IEEE80211_MESHRT_FLAGS_VALID) == 0) {
|
2012-05-01 16:05:09 +00:00
|
|
|
if (hr->hr_lastdiscovery != 0 &&
|
|
|
|
(ticks - hr->hr_lastdiscovery <
|
|
|
|
(ieee80211_hwmp_net_diameter_traversaltime * 2))) {
|
|
|
|
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY,
|
|
|
|
dest, NULL, "%s",
|
|
|
|
"too frequent discovery requeust");
|
2013-02-07 21:25:32 +00:00
|
|
|
sendpreq = 1;
|
2012-05-01 16:05:09 +00:00
|
|
|
goto done;
|
|
|
|
}
|
|
|
|
hr->hr_lastdiscovery = ticks;
|
|
|
|
if (hr->hr_preqretries >=
|
|
|
|
ieee80211_hwmp_maxpreq_retries) {
|
|
|
|
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY,
|
|
|
|
dest, NULL, "%s",
|
|
|
|
"no valid path , max number of discovery");
|
|
|
|
vap->iv_stats.is_mesh_fwd_nopath++;
|
|
|
|
goto done;
|
|
|
|
}
|
2012-05-01 16:16:20 +00:00
|
|
|
rt->rt_flags = IEEE80211_MESHRT_FLAGS_DISCOVER;
|
2012-05-01 16:05:09 +00:00
|
|
|
hr->hr_preqretries++;
|
2009-10-19 11:17:46 +00:00
|
|
|
if (hr->hr_origseq == 0)
|
|
|
|
hr->hr_origseq = ++hs->hs_seq;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
rt->rt_metric = IEEE80211_MESHLMETRIC_INITIALVAL;
|
|
|
|
sendpreq = 1;
|
|
|
|
IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_HWMP, dest,
|
2012-01-21 00:42:28 +00:00
|
|
|
"start path discovery (src %s), target seq %u",
|
2009-07-20 19:12:08 +00:00
|
|
|
m == NULL ? "<none>" : ether_sprintf(
|
2012-01-21 00:42:28 +00:00
|
|
|
mtod(m, struct ether_header *)->ether_shost),
|
|
|
|
hr->hr_seq);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
/*
|
|
|
|
* Try to discover the path for this node.
|
2012-01-21 00:42:28 +00:00
|
|
|
* Group addressed PREQ Case A
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
*/
|
2012-05-01 16:06:20 +00:00
|
|
|
preq.preq_flags = 0;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
preq.preq_hopcount = 0;
|
|
|
|
preq.preq_ttl = ms->ms_ttl;
|
2009-07-27 14:22:09 +00:00
|
|
|
preq.preq_id = ++hs->hs_preqid;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
IEEE80211_ADDR_COPY(preq.preq_origaddr, vap->iv_myaddr);
|
2009-10-19 11:17:46 +00:00
|
|
|
preq.preq_origseq = hr->hr_origseq;
|
2012-05-01 15:47:30 +00:00
|
|
|
preq.preq_lifetime =
|
|
|
|
ticks_to_msecs(ieee80211_hwmp_pathtimeout);
|
2012-05-01 16:07:35 +00:00
|
|
|
preq.preq_metric = IEEE80211_MESHLMETRIC_INITIALVAL;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
preq.preq_tcount = 1;
|
|
|
|
IEEE80211_ADDR_COPY(PREQ_TADDR(0), dest);
|
|
|
|
PREQ_TFLAGS(0) = 0;
|
|
|
|
if (ieee80211_hwmp_targetonly)
|
|
|
|
PREQ_TFLAGS(0) |= IEEE80211_MESHPREQ_TFLAGS_TO;
|
|
|
|
PREQ_TFLAGS(0) |= IEEE80211_MESHPREQ_TFLAGS_USN;
|
2012-05-01 16:07:35 +00:00
|
|
|
PREQ_TSEQ(0) = 0; /* RESERVED when USN flag is set */
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
/* XXX check return value */
|
2013-02-07 21:26:40 +00:00
|
|
|
hwmp_send_preq(vap, broadcastaddr, &preq,
|
|
|
|
&hr->hr_lastpreq, &ieee80211_hwmp_preqminint);
|
2012-05-01 16:16:20 +00:00
|
|
|
callout_reset(&rt->rt_discovery,
|
|
|
|
ieee80211_hwmp_net_diameter_traversaltime * 2,
|
|
|
|
hwmp_rediscover_cb, rt);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
2009-07-20 19:12:08 +00:00
|
|
|
if (rt->rt_flags & IEEE80211_MESHRT_FLAGS_VALID)
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
ni = ieee80211_find_txnode(vap, rt->rt_nexthop);
|
|
|
|
} else {
|
|
|
|
ni = ieee80211_find_txnode(vap, dest);
|
2009-07-20 19:12:08 +00:00
|
|
|
/* NB: if null then we leak mbuf */
|
|
|
|
KASSERT(ni != NULL, ("leak mcast frame"));
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
return ni;
|
|
|
|
}
|
|
|
|
done:
|
|
|
|
if (ni == NULL && m != NULL) {
|
|
|
|
if (sendpreq) {
|
|
|
|
struct ieee80211com *ic = vap->iv_ic;
|
|
|
|
/*
|
|
|
|
* Queue packet for transmit when path discovery
|
|
|
|
* completes. If discovery never completes the
|
|
|
|
* frame will be flushed by way of the aging timer.
|
|
|
|
*/
|
2009-07-20 19:12:08 +00:00
|
|
|
IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_HWMP, dest,
|
|
|
|
"%s", "queue frame until path found");
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
m->m_pkthdr.rcvif = (void *)(uintptr_t)
|
|
|
|
ieee80211_mac_hash(ic, dest);
|
|
|
|
/* XXX age chosen randomly */
|
|
|
|
ieee80211_ageq_append(&ic->ic_stageq, m,
|
|
|
|
IEEE80211_INACT_WAIT);
|
2009-07-20 19:12:08 +00:00
|
|
|
} else {
|
|
|
|
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_HWMP,
|
|
|
|
dest, NULL, "%s", "no valid path to this node");
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
m_freem(m);
|
2009-07-20 19:12:08 +00:00
|
|
|
}
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
|
|
|
return ni;
|
|
|
|
}
|
|
|
|
#undef PREQ_TFLAGS
|
|
|
|
#undef PREQ_TADDR
|
|
|
|
#undef PREQ_TSEQ
|
|
|
|
|
|
|
|
static int
|
|
|
|
hwmp_ioctl_get80211(struct ieee80211vap *vap, struct ieee80211req *ireq)
|
|
|
|
{
|
|
|
|
struct ieee80211_hwmp_state *hs = vap->iv_hwmp;
|
|
|
|
int error;
|
2012-01-21 00:42:28 +00:00
|
|
|
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
if (vap->iv_opmode != IEEE80211_M_MBSS)
|
|
|
|
return ENOSYS;
|
|
|
|
error = 0;
|
|
|
|
switch (ireq->i_type) {
|
|
|
|
case IEEE80211_IOC_HWMP_ROOTMODE:
|
|
|
|
ireq->i_val = hs->hs_rootmode;
|
|
|
|
break;
|
|
|
|
case IEEE80211_IOC_HWMP_MAXHOPS:
|
|
|
|
ireq->i_val = hs->hs_maxhops;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return ENOSYS;
|
|
|
|
}
|
|
|
|
return error;
|
|
|
|
}
|
|
|
|
IEEE80211_IOCTL_GET(hwmp, hwmp_ioctl_get80211);
|
|
|
|
|
|
|
|
static int
|
|
|
|
hwmp_ioctl_set80211(struct ieee80211vap *vap, struct ieee80211req *ireq)
|
|
|
|
{
|
|
|
|
struct ieee80211_hwmp_state *hs = vap->iv_hwmp;
|
|
|
|
int error;
|
|
|
|
|
|
|
|
if (vap->iv_opmode != IEEE80211_M_MBSS)
|
|
|
|
return ENOSYS;
|
|
|
|
error = 0;
|
|
|
|
switch (ireq->i_type) {
|
|
|
|
case IEEE80211_IOC_HWMP_ROOTMODE:
|
|
|
|
if (ireq->i_val < 0 || ireq->i_val > 3)
|
|
|
|
return EINVAL;
|
|
|
|
hs->hs_rootmode = ireq->i_val;
|
|
|
|
hwmp_rootmode_setup(vap);
|
|
|
|
break;
|
|
|
|
case IEEE80211_IOC_HWMP_MAXHOPS:
|
|
|
|
if (ireq->i_val <= 0 || ireq->i_val > 255)
|
|
|
|
return EINVAL;
|
|
|
|
hs->hs_maxhops = ireq->i_val;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return ENOSYS;
|
|
|
|
}
|
|
|
|
return error;
|
|
|
|
}
|
|
|
|
IEEE80211_IOCTL_SET(hwmp, hwmp_ioctl_set80211);
|