d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
ee320f98a9
freebsd-nq/sys/amd64/include/pcb.h

136 lines
4.4 KiB
C
Raw Normal View History

Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
/*-
Update the graffiti.
2003-11-08 04:39:22 +00:00
* Copyright (c) 2003 Peter Wemm.
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
* Copyright (c) 1990 The Regents of the University of California.
* All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* William Jolitz.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
All: Remove patch kit headers, and add $Id$ This is mostly to align some more code with NetBSD. cpu.h: Remove the old function vs. include configuration stuff that was ifdefed out when we went to inline functions. Remove the define of resettodr that made it a nop, there is already a function that makes it a nop, no need to #define one. Remove the #defines of processor types, they are now defined in cputypes.h, #include that file. Add struct cpu_nameclass for support of cpu types. frame.h: include sys/signal.h, it will be needed in the future. put the sigframe structure here that was in machdep.c pcb.h: Add multiple inclusion protection. Add pcb_ldt and pcb_ldt_len to pcb structure, this is for the user mode ldt.
1993-10-08 20:51:00 +00:00
* from: @(#)pcb.h 5.10 (Berkeley) 5/12/91
$Id$ -> $FreeBSD$
1999-08-28 01:08:13 +00:00
* $FreeBSD$
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
*/
Update the graffiti.
2003-11-08 04:39:22 +00:00
#ifndef _AMD64_PCB_H_
#define _AMD64_PCB_H_
All: Remove patch kit headers, and add $Id$ This is mostly to align some more code with NetBSD. cpu.h: Remove the old function vs. include configuration stuff that was ifdefed out when we went to inline functions. Remove the define of resettodr that made it a nop, there is already a function that makes it a nop, no need to #define one. Remove the #defines of processor types, they are now defined in cputypes.h, #include that file. Add struct cpu_nameclass for support of cpu types. frame.h: include sys/signal.h, it will be needed in the future. put the sigframe structure here that was in machdep.c pcb.h: Add multiple inclusion protection. Add pcb_ldt and pcb_ldt_len to pcb structure, this is for the user mode ldt.
1993-10-08 20:51:00 +00:00
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
/*
Rename npx* to fpu*. I haven't done the flags/function names yet.
2003-11-08 02:39:46 +00:00
* AMD64 process control block
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
*/
Rename npx* to fpu*. I haven't done the flags/function names yet.
2003-11-08 02:39:46 +00:00
#include <machine/fpu.h>
MFP4: Linux set_thread_area syscall (aka TLS) support for amd64. Initial version was submitted by Divacky Roman and mostly rewritten by me. Tested by: emulation
2007-03-30 00:06:21 +00:00
#include <machine/segments.h>
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
struct pcb {
Commit MD parts of a loosely functional AMD64 port. This is based on a heavily stripped down FreeBSD/i386 (brutally stripped down actually) to attempt to get a stable base to start from. There is a lot missing still. Worth noting: - The kernel runs at 1GB in order to cheat with the pmap code. pmap uses a variation of the PAE code in order to avoid having to worry about 4 levels of page tables yet. - It boots in 64 bit "long mode" with a tiny trampoline embedded in the i386 loader. This simplifies locore.s greatly. - There are still quite a few fragments of i386-specific code that have not been translated yet, and some that I cheated and wrote dumb C versions of (bcopy etc). - It has both int 0x80 for syscalls (but using registers for argument passing, as is native on the amd64 ABI), and the 'syscall' instruction for syscalls. int 0x80 preserves all registers, 'syscall' does not. - I have tried to minimize looking at the NetBSD code, except in a couple of places (eg: to find which register they use to replace the trashed %rcx register in the syscall instruction). As a result, there is not a lot of similarity. I did look at NetBSD a few times while debugging to get some ideas about what I might have done wrong in my first attempt.
2003-05-01 01:05:25 +00:00
register_t pcb_r15;
register_t pcb_r14;
register_t pcb_r13;
register_t pcb_r12;
register_t pcb_rbp;
register_t pcb_rsp;
register_t pcb_rbx;
register_t pcb_rip;
Give a %fs and %gs to userland. Use swapgs to obtain the kernel %GS.base value on entry and exit. This isn't as easy as it sounds because when we recursively trap or interrupt, we have to avoid duplicating the swapgs instruction or we end up back with the userland %gs. I implemented this by testing TF_CS to see if we're coming from supervisor mode already, and check for returning to supervisor. To avoid a race with interrupts in the brief period after beginning executing the handler and before the swapgs, convert all trap gates to interrupt gates, and reenable interrupts immediately after the swapgs. I am not happy with this. There are other possible ways to do this that should be investigated. (eg: storing the GS.base MSR value in the trapframe) Add some sysarch functions to let the userland code get to this. Approved by: re (blanket amd64/*)
2003-05-12 02:37:29 +00:00
register_t pcb_fsbase;
register_t pcb_gsbase;
- Merge savectx2() with savectx() and struct xpcb with struct pcb. [1] savectx() is only used for panic dump (dumppcb) and kdb (stoppcbs). Thus, saving additional information does not hurt and it may be even beneficial. Unfortunately, struct pcb has grown larger to accommodate more data. Move 512-byte long pcb_user_save to the end of struct pcb while I am here. - savectx() now saves FPU state unconditionally and copy it to the PCB of FPU thread if necessary. This gives panic dump and kdb a chance to take a look at the current FPU state even if the FPU is "supposedly" not used. - Resuming CPU now unconditionally reinitializes FPU. If the saved FPU state was irrelevant, it could be in an unknown state. Suggested by: bde [1]
2010-08-02 17:35:00 +00:00
register_t pcb_kgsbase;
register_t pcb_cr0;
register_t pcb_cr2;
register_t pcb_cr3;
register_t pcb_cr4;
register_t pcb_dr0;
register_t pcb_dr1;
register_t pcb_dr2;
register_t pcb_dr3;
register_t pcb_dr6;
register_t pcb_dr7;
Implement support for hardware debug registers on the i386. Submitted by: Brian Dean <brdean@unx.sas.com>
1999-07-09 04:16:00 +00:00
Improve PCB flags handling and make it more robust. Add two new functions for manipulating pcb_flags. These inline functions are very similar to atomic_set_char(9) and atomic_clear_char(9) but without unnecessary LOCK prefix for SMP. Add comments about the rationale[1]. Use these functions wherever possible. Although there are some places where it is not strictly necessary (e.g., a PCB is copied to create a new PCB), it is done across the board for sake of consistency. Turn pcb_full_iret into a PCB flag as it is safe now. Move rarely used fields before pcb_flags and reduce size of pcb_flags to one byte. Fix some style(9) nits in pcb.h while I am in the neighborhood. Reviewed by: kib Submitted by: kib[1] MFC after: 2 months
2010-12-22 00:18:42 +00:00
struct region_descriptor pcb_gdt;
struct region_descriptor pcb_idt;
struct region_descriptor pcb_ldt;
uint16_t pcb_tr;
Increase size of pcb_flags to four bytes. Requested by: bde, jhb
2010-12-22 19:57:03 +00:00
u_int pcb_flags;
Improve PCB flags handling and make it more robust. Add two new functions for manipulating pcb_flags. These inline functions are very similar to atomic_set_char(9) and atomic_clear_char(9) but without unnecessary LOCK prefix for SMP. Add comments about the rationale[1]. Use these functions wherever possible. Although there are some places where it is not strictly necessary (e.g., a PCB is copied to create a new PCB), it is done across the board for sake of consistency. Turn pcb_full_iret into a PCB flag as it is safe now. Move rarely used fields before pcb_flags and reduce size of pcb_flags to one byte. Fix some style(9) nits in pcb.h while I am in the neighborhood. Reviewed by: kib Submitted by: kib[1] MFC after: 2 months
2010-12-22 00:18:42 +00:00
#define PCB_FULL_IRET 0x01 /* full iret is required */
Rearrange struct pcb. r177532 (CVS r1.64 of pcb.h) moved pcb_flags to make better use of cache lines by placing it before pcb_save (now pcb_user_save), which is moved to the end of pcb since r210777.
2010-08-02 18:12:30 +00:00
#define PCB_DBREGS 0x02 /* process using debug registers */
#define PCB_KERNFPU 0x04 /* kernel uses fpu */
#define PCB_FPUINITDONE 0x08 /* fpu state is initialized */
#define PCB_USERFPUINITDONE 0x10 /* fpu user state is initialized */
#define PCB_GS32BIT 0x20 /* linux gs switch */
#define PCB_32BIT 0x40 /* process has 32 bit context (segs etc) */
A better fix for handling different FPU initial control words for different ABIs: - Store the FPU initial control word in the pcb for each thread. - When first using the FPU, load the initial control word after restoring the clean state if it is not the standard control word. - Provide a correct control word for Linux/i386 binaries under FreeBSD/amd64. - Adjust the control word returned for fpugetregs()/npxgetregs() when a thread hasn't used the FPU yet to reflect the real initial control word for the current ABI. - The Linux/i386 ABI for FreeBSD/i386 now properly sets the right control word instead of trashing whatever the current state of the FPU is. Reviewed by: bde
2009-03-05 19:42:11 +00:00
uint16_t pcb_initial_fpucw;
1.Fix smp race between kernel vm86 BIOS calling and userland vm86 mode code, remove global variable in_vm86call, set vm86 calling flag in PCB flags. 2.Fix vm86 BIOS calling preempted problem by changing vm86_lock mutex type from MTX_DEF to MTX_SPIN. vm86pcb is not remembered in thread struct, when the thread calling vm86 BIOS is preempted by interrupt thread, and later switching back to the thread would cause incorrect context be loaded into CPU registers, this leads to kernel crash.
2002-11-07 01:34:23 +00:00
Improve PCB flags handling and make it more robust. Add two new functions for manipulating pcb_flags. These inline functions are very similar to atomic_set_char(9) and atomic_clear_char(9) but without unnecessary LOCK prefix for SMP. Add comments about the rationale[1]. Use these functions wherever possible. Although there are some places where it is not strictly necessary (e.g., a PCB is copied to create a new PCB), it is done across the board for sake of consistency. Turn pcb_full_iret into a PCB flag as it is safe now. Move rarely used fields before pcb_flags and reduce size of pcb_flags to one byte. Fix some style(9) nits in pcb.h while I am in the neighborhood. Reviewed by: kib Submitted by: kib[1] MFC after: 2 months
2010-12-22 00:18:42 +00:00
/* copyin/out fault recovery */
caddr_t pcb_onfault;
MFP4: Linux set_thread_area syscall (aka TLS) support for amd64. Initial version was submitted by Divacky Roman and mostly rewritten by me. Tested by: emulation
2007-03-30 00:06:21 +00:00
/* 32-bit segment descriptor */
- Merge savectx2() with savectx() and struct xpcb with struct pcb. [1] savectx() is only used for panic dump (dumppcb) and kdb (stoppcbs). Thus, saving additional information does not hurt and it may be even beneficial. Unfortunately, struct pcb has grown larger to accommodate more data. Move 512-byte long pcb_user_save to the end of struct pcb while I am here. - savectx() now saves FPU state unconditionally and copy it to the PCB of FPU thread if necessary. This gives panic dump and kdb a chance to take a look at the current FPU state even if the FPU is "supposedly" not used. - Resuming CPU now unconditionally reinitializes FPU. If the saved FPU state was irrelevant, it could be in an unknown state. Suggested by: bde [1]
2010-08-02 17:35:00 +00:00
struct user_segment_descriptor pcb_gs32sd;
Improve PCB flags handling and make it more robust. Add two new functions for manipulating pcb_flags. These inline functions are very similar to atomic_set_char(9) and atomic_clear_char(9) but without unnecessary LOCK prefix for SMP. Add comments about the rationale[1]. Use these functions wherever possible. Although there are some places where it is not strictly necessary (e.g., a PCB is copied to create a new PCB), it is done across the board for sake of consistency. Turn pcb_full_iret into a PCB flag as it is safe now. Move rarely used fields before pcb_flags and reduce size of pcb_flags to one byte. Fix some style(9) nits in pcb.h while I am in the neighborhood. Reviewed by: kib Submitted by: kib[1] MFC after: 2 months
2010-12-22 00:18:42 +00:00
Save and restore segment registers on amd64 when entering and leaving the kernel on amd64. Fill and read segment registers for mcontext and signals. Handle traps caused by restoration of the invalidated selectors. Implement user-mode creation and manipulation of the process-specific LDT descriptors for amd64, see sysarch(2). Implement support for TSS i/o port access permission bitmap for amd64. Context-switch LDT and TSS. Do not save and restore segment registers on the context switch, that is handled by kernel enter/leave trampolines now. Remove segment restore code from the signal trampolines for freebsd/amd64, freebsd/ia32 and linux/i386 for the same reason. Implement amd64-specific compat shims for sysarch. Linuxolator (temporary ?) switched to use gsbase for thread_area pointer. TODO: Currently, gdb is not adapted to show segment registers from struct reg. Also, no machine-depended ptrace command is added to set segment registers for debugged process. In collaboration with: pho Discussed with: peter Reviewed by: jhb Linuxolator tested by: dchagin
2009-04-01 13:09:26 +00:00
/* local tss, with i/o bitmap; NULL for common */
struct amd64tss *pcb_tssp;
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
Improve PCB flags handling and make it more robust. Add two new functions for manipulating pcb_flags. These inline functions are very similar to atomic_set_char(9) and atomic_clear_char(9) but without unnecessary LOCK prefix for SMP. Add comments about the rationale[1]. Use these functions wherever possible. Although there are some places where it is not strictly necessary (e.g., a PCB is copied to create a new PCB), it is done across the board for sake of consistency. Turn pcb_full_iret into a PCB flag as it is safe now. Move rarely used fields before pcb_flags and reduce size of pcb_flags to one byte. Fix some style(9) nits in pcb.h while I am in the neighborhood. Reviewed by: kib Submitted by: kib[1] MFC after: 2 months
2010-12-22 00:18:42 +00:00
struct savefpu *pcb_save;
struct savefpu pcb_user_save;
Initial suspend/resume support for amd64. This code is heavily inspired by Takanori Watanabe's experimental SMP patch for i386 and large portion was shamelessly cut and pasted from Peter Wemm's AP boot code.
2009-03-17 00:48:11 +00:00
};
Change #ifdef KERNEL to #ifdef _KERNEL in the public headers. "KERNEL" is an application space macro and the applications are supposed to be free to use it as they please (but cannot). This is consistant with the other BSD's who made this change quite some time ago. More commits to come.
1999-12-29 04:46:21 +00:00
#ifdef _KERNEL
Implement makectx(). The makectx() function is used by KDB to create a PCB from a trapframe for purposes of unwinding the stack. The PCB is used as the thread context and all but the thread that entered the debugger has a valid PCB. This function can also be used to create a context for the threads running on the CPUs that have been stopped when the debugger got entered. This however is not done at the time of this commit.
2004-07-10 19:56:00 +00:00
struct trapframe;
Improve PCB flags handling and make it more robust. Add two new functions for manipulating pcb_flags. These inline functions are very similar to atomic_set_char(9) and atomic_clear_char(9) but without unnecessary LOCK prefix for SMP. Add comments about the rationale[1]. Use these functions wherever possible. Although there are some places where it is not strictly necessary (e.g., a PCB is copied to create a new PCB), it is done across the board for sake of consistency. Turn pcb_full_iret into a PCB flag as it is safe now. Move rarely used fields before pcb_flags and reduce size of pcb_flags to one byte. Fix some style(9) nits in pcb.h while I am in the neighborhood. Reviewed by: kib Submitted by: kib[1] MFC after: 2 months
2010-12-22 00:18:42 +00:00
/*
* The pcb_flags is only modified by current thread, or by other threads
* when current thread is stopped. However, current thread may change it
* from the interrupt context in cpu_switch(), or in the trap handler.
* When we read-modify-write pcb_flags from C sources, compiler may generate
* code that is not atomic regarding the interrupt handler. If a trap or
* interrupt happens and any flag is modified from the handler, it can be
* clobbered with the cached value later. Therefore, we implement setting
* and clearing flags with single-instruction functions, which do not race
* with possible modification of the flags from the trap or interrupt context,
* because traps and interrupts are executed only on instruction boundary.
*/
static __inline void
Increase size of pcb_flags to four bytes. Requested by: bde, jhb
2010-12-22 19:57:03 +00:00
set_pcb_flags(struct pcb *pcb, const u_int flags)
Improve PCB flags handling and make it more robust. Add two new functions for manipulating pcb_flags. These inline functions are very similar to atomic_set_char(9) and atomic_clear_char(9) but without unnecessary LOCK prefix for SMP. Add comments about the rationale[1]. Use these functions wherever possible. Although there are some places where it is not strictly necessary (e.g., a PCB is copied to create a new PCB), it is done across the board for sake of consistency. Turn pcb_full_iret into a PCB flag as it is safe now. Move rarely used fields before pcb_flags and reduce size of pcb_flags to one byte. Fix some style(9) nits in pcb.h while I am in the neighborhood. Reviewed by: kib Submitted by: kib[1] MFC after: 2 months
2010-12-22 00:18:42 +00:00
{
Increase size of pcb_flags to four bytes. Requested by: bde, jhb
2010-12-22 19:57:03 +00:00
__asm __volatile("orl %1,%0"
: "=m" (pcb->pcb_flags) : "ir" (flags), "m" (pcb->pcb_flags)
Improve PCB flags handling and make it more robust. Add two new functions for manipulating pcb_flags. These inline functions are very similar to atomic_set_char(9) and atomic_clear_char(9) but without unnecessary LOCK prefix for SMP. Add comments about the rationale[1]. Use these functions wherever possible. Although there are some places where it is not strictly necessary (e.g., a PCB is copied to create a new PCB), it is done across the board for sake of consistency. Turn pcb_full_iret into a PCB flag as it is safe now. Move rarely used fields before pcb_flags and reduce size of pcb_flags to one byte. Fix some style(9) nits in pcb.h while I am in the neighborhood. Reviewed by: kib Submitted by: kib[1] MFC after: 2 months
2010-12-22 00:18:42 +00:00
: "cc");
}
static __inline void
Increase size of pcb_flags to four bytes. Requested by: bde, jhb
2010-12-22 19:57:03 +00:00
clear_pcb_flags(struct pcb *pcb, const u_int flags)
Improve PCB flags handling and make it more robust. Add two new functions for manipulating pcb_flags. These inline functions are very similar to atomic_set_char(9) and atomic_clear_char(9) but without unnecessary LOCK prefix for SMP. Add comments about the rationale[1]. Use these functions wherever possible. Although there are some places where it is not strictly necessary (e.g., a PCB is copied to create a new PCB), it is done across the board for sake of consistency. Turn pcb_full_iret into a PCB flag as it is safe now. Move rarely used fields before pcb_flags and reduce size of pcb_flags to one byte. Fix some style(9) nits in pcb.h while I am in the neighborhood. Reviewed by: kib Submitted by: kib[1] MFC after: 2 months
2010-12-22 00:18:42 +00:00
{
Increase size of pcb_flags to four bytes. Requested by: bde, jhb
2010-12-22 19:57:03 +00:00
__asm __volatile("andl %1,%0"
: "=m" (pcb->pcb_flags) : "ir" (~flags), "m" (pcb->pcb_flags)
Improve PCB flags handling and make it more robust. Add two new functions for manipulating pcb_flags. These inline functions are very similar to atomic_set_char(9) and atomic_clear_char(9) but without unnecessary LOCK prefix for SMP. Add comments about the rationale[1]. Use these functions wherever possible. Although there are some places where it is not strictly necessary (e.g., a PCB is copied to create a new PCB), it is done across the board for sake of consistency. Turn pcb_full_iret into a PCB flag as it is safe now. Move rarely used fields before pcb_flags and reduce size of pcb_flags to one byte. Fix some style(9) nits in pcb.h while I am in the neighborhood. Reviewed by: kib Submitted by: kib[1] MFC after: 2 months
2010-12-22 00:18:42 +00:00
: "cc");
}
Implement makectx(). The makectx() function is used by KDB to create a PCB from a trapframe for purposes of unwinding the stack. The PCB is used as the thread context and all but the thread that entered the debugger has a valid PCB. This function can also be used to create a context for the threads running on the CPUs that have been stopped when the debugger got entered. This however is not done at the time of this commit.
2004-07-10 19:56:00 +00:00
void makectx(struct trapframe *, struct pcb *);
- Merge savectx2() with savectx() and struct xpcb with struct pcb. [1] savectx() is only used for panic dump (dumppcb) and kdb (stoppcbs). Thus, saving additional information does not hurt and it may be even beneficial. Unfortunately, struct pcb has grown larger to accommodate more data. Move 512-byte long pcb_user_save to the end of struct pcb while I am here. - savectx() now saves FPU state unconditionally and copy it to the PCB of FPU thread if necessary. This gives panic dump and kdb a chance to take a look at the current FPU state even if the FPU is "supposedly" not used. - Resuming CPU now unconditionally reinitializes FPU. If the saved FPU state was irrelevant, it could be in an unknown state. Suggested by: bde [1]
2010-08-02 17:35:00 +00:00
int savectx(struct pcb *);
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
#endif
All: Remove patch kit headers, and add $Id$ This is mostly to align some more code with NetBSD. cpu.h: Remove the old function vs. include configuration stuff that was ifdefed out when we went to inline functions. Remove the define of resettodr that made it a nop, there is already a function that makes it a nop, no need to #define one. Remove the #defines of processor types, they are now defined in cputypes.h, #include that file. Add struct cpu_nameclass for support of cpu types. frame.h: include sys/signal.h, it will be needed in the future. put the sigframe structure here that was in machdep.c pcb.h: Add multiple inclusion protection. Add pcb_ldt and pcb_ldt_len to pcb structure, this is for the user mode ldt.
1993-10-08 20:51:00 +00:00
Update the graffiti.
2003-11-08 04:39:22 +00:00
#endif /* _AMD64_PCB_H_ */
Reference in New Issue Copy Permalink