d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
f848d08e45
freebsd-nq/sys/arm64/rockchip/if_dwc_rk.c

626 lines
17 KiB
C
Raw Normal View History

if_dwc_rk: Add DesignWare driver for RockChip SoCs. Add driver for the designware ethernet controller found in some RockChip SoCs. The driver still rely on a lot of things setup by the bootloader like clocks and phy mode. But since netbooting is the only/easiest way to boot rockchip board at the moment add the driver so other people can test/dev on thoses boards.
2018-06-14 06:28:09 +00:00
/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 2018 Emmanuel Vadot <manu@freebsd.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
Improve Rockchip's integration of if_dwc - Do not rely on U-Boot for clocks configuration, enable and set frequencies in the driver's attach method. - Adjust MAC settings according to detected linespeed on RK3399 and RK3328. - Add support for RMII PHY mode on RK3328. Reviewed by: manu Differential Revision: https://reviews.freebsd.org/D26006
2020-08-10 19:37:06 +00:00
*/
if_dwc_rk: Add DesignWare driver for RockChip SoCs. Add driver for the designware ethernet controller found in some RockChip SoCs. The driver still rely on a lot of things setup by the bootloader like clocks and phy mode. But since netbooting is the only/easiest way to boot rockchip board at the moment add the driver so other people can test/dev on thoses boards.
2018-06-14 06:28:09 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/module.h>
Improve Rockchip's integration of if_dwc - Do not rely on U-Boot for clocks configuration, enable and set frequencies in the driver's attach method. - Adjust MAC settings according to detected linespeed on RK3399 and RK3328. - Add support for RMII PHY mode on RK3328. Reviewed by: manu Differential Revision: https://reviews.freebsd.org/D26006
2020-08-10 19:37:06 +00:00
#include <sys/socket.h>
if_dwc_rk: Add DesignWare driver for RockChip SoCs. Add driver for the designware ethernet controller found in some RockChip SoCs. The driver still rely on a lot of things setup by the bootloader like clocks and phy mode. But since netbooting is the only/easiest way to boot rockchip board at the moment add the driver so other people can test/dev on thoses boards.
2018-06-14 06:28:09 +00:00
#include <machine/bus.h>
Improve Rockchip's integration of if_dwc - Do not rely on U-Boot for clocks configuration, enable and set frequencies in the driver's attach method. - Adjust MAC settings according to detected linespeed on RK3399 and RK3328. - Add support for RMII PHY mode on RK3328. Reviewed by: manu Differential Revision: https://reviews.freebsd.org/D26006
2020-08-10 19:37:06 +00:00
#include <net/if.h>
#include <net/if_media.h>
if_dwc_rk: Add DesignWare driver for RockChip SoCs. Add driver for the designware ethernet controller found in some RockChip SoCs. The driver still rely on a lot of things setup by the bootloader like clocks and phy mode. But since netbooting is the only/easiest way to boot rockchip board at the moment add the driver so other people can test/dev on thoses boards.
2018-06-14 06:28:09 +00:00
#include <dev/dwc/if_dwc.h>
#include <dev/dwc/if_dwcvar.h>
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>
#include <dev/extres/clk/clk.h>
Improve Rockchip's integration of if_dwc - Do not rely on U-Boot for clocks configuration, enable and set frequencies in the driver's attach method. - Adjust MAC settings according to detected linespeed on RK3399 and RK3328. - Add support for RMII PHY mode on RK3328. Reviewed by: manu Differential Revision: https://reviews.freebsd.org/D26006
2020-08-10 19:37:06 +00:00
#include <dev/extres/hwreset/hwreset.h>
if_dwc_rk: Add DesignWare driver for RockChip SoCs. Add driver for the designware ethernet controller found in some RockChip SoCs. The driver still rely on a lot of things setup by the bootloader like clocks and phy mode. But since netbooting is the only/easiest way to boot rockchip board at the moment add the driver so other people can test/dev on thoses boards.
2018-06-14 06:28:09 +00:00
#include <dev/extres/regulator/regulator.h>
#include <dev/extres/syscon/syscon.h>
#include "if_dwc_if.h"
Improve Rockchip's integration of if_dwc - Do not rely on U-Boot for clocks configuration, enable and set frequencies in the driver's attach method. - Adjust MAC settings according to detected linespeed on RK3399 and RK3328. - Add support for RMII PHY mode on RK3328. Reviewed by: manu Differential Revision: https://reviews.freebsd.org/D26006
2020-08-10 19:37:06 +00:00
#include "syscon_if.h"
if_dwc_rk: Add DesignWare driver for RockChip SoCs. Add driver for the designware ethernet controller found in some RockChip SoCs. The driver still rely on a lot of things setup by the bootloader like clocks and phy mode. But since netbooting is the only/easiest way to boot rockchip board at the moment add the driver so other people can test/dev on thoses boards.
2018-06-14 06:28:09 +00:00
#define RK3328_GRF_MAC_CON0 0x0900
Improve Rockchip's integration of if_dwc - Do not rely on U-Boot for clocks configuration, enable and set frequencies in the driver's attach method. - Adjust MAC settings according to detected linespeed on RK3399 and RK3328. - Add support for RMII PHY mode on RK3328. Reviewed by: manu Differential Revision: https://reviews.freebsd.org/D26006
2020-08-10 19:37:06 +00:00
#define MAC_CON0_GMAC2IO_TX_DL_CFG_MASK 0x7F
#define MAC_CON0_GMAC2IO_TX_DL_CFG_SHIFT 0
#define MAC_CON0_GMAC2IO_RX_DL_CFG_MASK 0x7F
#define MAC_CON0_GMAC2IO_RX_DL_CFG_SHIFT 7
if_dwc_rk: Add DesignWare driver for RockChip SoCs. Add driver for the designware ethernet controller found in some RockChip SoCs. The driver still rely on a lot of things setup by the bootloader like clocks and phy mode. But since netbooting is the only/easiest way to boot rockchip board at the moment add the driver so other people can test/dev on thoses boards.
2018-06-14 06:28:09 +00:00
#define RK3328_GRF_MAC_CON1 0x0904
Improve Rockchip's integration of if_dwc - Do not rely on U-Boot for clocks configuration, enable and set frequencies in the driver's attach method. - Adjust MAC settings according to detected linespeed on RK3399 and RK3328. - Add support for RMII PHY mode on RK3328. Reviewed by: manu Differential Revision: https://reviews.freebsd.org/D26006
2020-08-10 19:37:06 +00:00
#define MAC_CON1_GMAC2IO_GMAC_TXCLK_DLY_ENA (1 << 0)
#define MAC_CON1_GMAC2IO_GMAC_RXCLK_DLY_ENA (1 << 1)
#define MAC_CON1_GMAC2IO_GMII_CLK_SEL_MASK (3 << 11)
#define MAC_CON1_GMAC2IO_GMII_CLK_SEL_125 (0 << 11)
#define MAC_CON1_GMAC2IO_GMII_CLK_SEL_25 (3 << 11)
#define MAC_CON1_GMAC2IO_GMII_CLK_SEL_2_5 (2 << 11)
#define MAC_CON1_GMAC2IO_RMII_MODE_MASK (1 << 9)
#define MAC_CON1_GMAC2IO_RMII_MODE (1 << 9)
#define MAC_CON1_GMAC2IO_INTF_SEL_MASK (7 << 4)
#define MAC_CON1_GMAC2IO_INTF_RMII (4 << 4)
#define MAC_CON1_GMAC2IO_INTF_RGMII (1 << 4)
#define MAC_CON1_GMAC2IO_RMII_CLK_SEL_MASK (1 << 7)
#define MAC_CON1_GMAC2IO_RMII_CLK_SEL_25 (1 << 7)
#define MAC_CON1_GMAC2IO_RMII_CLK_SEL_2_5 (0 << 7)
#define MAC_CON1_GMAC2IO_MAC_SPEED_MASK (1 << 2)
#define MAC_CON1_GMAC2IO_MAC_SPEED_100 (1 << 2)
#define MAC_CON1_GMAC2IO_MAC_SPEED_10 (0 << 2)
if_dwc_rk: Add DesignWare driver for RockChip SoCs. Add driver for the designware ethernet controller found in some RockChip SoCs. The driver still rely on a lot of things setup by the bootloader like clocks and phy mode. But since netbooting is the only/easiest way to boot rockchip board at the moment add the driver so other people can test/dev on thoses boards.
2018-06-14 06:28:09 +00:00
#define RK3328_GRF_MAC_CON2 0x0908
#define RK3328_GRF_MACPHY_CON0 0x0B00
Improve Rockchip's integration of if_dwc - Do not rely on U-Boot for clocks configuration, enable and set frequencies in the driver's attach method. - Adjust MAC settings according to detected linespeed on RK3399 and RK3328. - Add support for RMII PHY mode on RK3328. Reviewed by: manu Differential Revision: https://reviews.freebsd.org/D26006
2020-08-10 19:37:06 +00:00
#define MACPHY_CON0_CLK_50M_MASK (1 << 14)
#define MACPHY_CON0_CLK_50M (1 << 14)
#define MACPHY_CON0_RMII_MODE_MASK (3 << 6)
#define MACPHY_CON0_RMII_MODE (1 << 6)
if_dwc_rk: Add DesignWare driver for RockChip SoCs. Add driver for the designware ethernet controller found in some RockChip SoCs. The driver still rely on a lot of things setup by the bootloader like clocks and phy mode. But since netbooting is the only/easiest way to boot rockchip board at the moment add the driver so other people can test/dev on thoses boards.
2018-06-14 06:28:09 +00:00
#define RK3328_GRF_MACPHY_CON1 0x0B04
Improve Rockchip's integration of if_dwc - Do not rely on U-Boot for clocks configuration, enable and set frequencies in the driver's attach method. - Adjust MAC settings according to detected linespeed on RK3399 and RK3328. - Add support for RMII PHY mode on RK3328. Reviewed by: manu Differential Revision: https://reviews.freebsd.org/D26006
2020-08-10 19:37:06 +00:00
#define MACPHY_CON1_RMII_MODE_MASK (1 << 9)
#define MACPHY_CON1_RMII_MODE (1 << 9)
if_dwc_rk: Add DesignWare driver for RockChip SoCs. Add driver for the designware ethernet controller found in some RockChip SoCs. The driver still rely on a lot of things setup by the bootloader like clocks and phy mode. But since netbooting is the only/easiest way to boot rockchip board at the moment add the driver so other people can test/dev on thoses boards.
2018-06-14 06:28:09 +00:00
#define RK3328_GRF_MACPHY_CON2 0x0B08
#define RK3328_GRF_MACPHY_CON3 0x0B0C
#define RK3328_GRF_MACPHY_STATUS 0x0B10
Improve Rockchip's integration of if_dwc - Do not rely on U-Boot for clocks configuration, enable and set frequencies in the driver's attach method. - Adjust MAC settings according to detected linespeed on RK3399 and RK3328. - Add support for RMII PHY mode on RK3328. Reviewed by: manu Differential Revision: https://reviews.freebsd.org/D26006
2020-08-10 19:37:06 +00:00
#define RK3399_GRF_SOC_CON5 0xc214
#define SOC_CON5_GMAC_CLK_SEL_MASK (3 << 4)
#define SOC_CON5_GMAC_CLK_SEL_125 (0 << 4)
#define SOC_CON5_GMAC_CLK_SEL_25 (3 << 4)
#define SOC_CON5_GMAC_CLK_SEL_2_5 (2 << 4)
#define RK3399_GRF_SOC_CON6 0xc218
#define SOC_CON6_GMAC_TXCLK_DLY_ENA (1 << 7)
#define SOC_CON6_TX_DL_CFG_MASK 0x7F
#define SOC_CON6_TX_DL_CFG_SHIFT 0
#define SOC_CON6_RX_DL_CFG_MASK 0x7F
#define SOC_CON6_GMAC_RXCLK_DLY_ENA (1 << 15)
#define SOC_CON6_RX_DL_CFG_SHIFT 8
struct if_dwc_rk_softc;
typedef void (*if_dwc_rk_set_delaysfn_t)(struct if_dwc_rk_softc *);
typedef int (*if_dwc_rk_set_speedfn_t)(struct if_dwc_rk_softc *, int);
typedef void (*if_dwc_rk_set_phy_modefn_t)(struct if_dwc_rk_softc *);
typedef void (*if_dwc_rk_phy_powerupfn_t)(struct if_dwc_rk_softc *);
struct if_dwc_rk_ops {
if_dwc_rk_set_delaysfn_t set_delays;
if_dwc_rk_set_speedfn_t set_speed;
if_dwc_rk_set_phy_modefn_t set_phy_mode;
if_dwc_rk_phy_powerupfn_t phy_powerup;
};
struct if_dwc_rk_softc {
struct dwc_softc base;
uint32_t tx_delay;
uint32_t rx_delay;
bool integrated_phy;
bool clock_in;
phandle_t phy_node;
struct syscon *grf;
struct if_dwc_rk_ops *ops;
/* Common clocks */
clk_t mac_clk_rx;
clk_t mac_clk_tx;
clk_t aclk_mac;
clk_t pclk_mac;
clk_t clk_stmmaceth;
/* RMII clocks */
clk_t clk_mac_ref;
clk_t clk_mac_refout;
/* PHY clock */
clk_t clk_phy;
};
static void rk3328_set_delays(struct if_dwc_rk_softc *sc);
static int rk3328_set_speed(struct if_dwc_rk_softc *sc, int speed);
static void rk3328_set_phy_mode(struct if_dwc_rk_softc *sc);
static void rk3328_phy_powerup(struct if_dwc_rk_softc *sc);
static void rk3399_set_delays(struct if_dwc_rk_softc *sc);
static int rk3399_set_speed(struct if_dwc_rk_softc *sc, int speed);
static struct if_dwc_rk_ops rk3288_ops = {
};
static struct if_dwc_rk_ops rk3328_ops = {
.set_delays = rk3328_set_delays,
.set_speed = rk3328_set_speed,
.set_phy_mode = rk3328_set_phy_mode,
.phy_powerup = rk3328_phy_powerup,
};
static struct if_dwc_rk_ops rk3399_ops = {
.set_delays = rk3399_set_delays,
.set_speed = rk3399_set_speed,
};
Add support for RK3288 into existing RockChip drivers. This patch ensures only minimal level of compatibility necessary to boot on RK3288 based boards. GPIO and pinctrl interaction, missing in current implementation, will be improved by own patch in the near future. MFC after: 2 weeks MFC with: r351452
2019-08-27 09:20:01 +00:00
static struct ofw_compat_data compat_data[] = {
Improve Rockchip's integration of if_dwc - Do not rely on U-Boot for clocks configuration, enable and set frequencies in the driver's attach method. - Adjust MAC settings according to detected linespeed on RK3399 and RK3328. - Add support for RMII PHY mode on RK3328. Reviewed by: manu Differential Revision: https://reviews.freebsd.org/D26006
2020-08-10 19:37:06 +00:00
{"rockchip,rk3288-gmac", (uintptr_t)&rk3288_ops},
{"rockchip,rk3328-gmac", (uintptr_t)&rk3328_ops},
{"rockchip,rk3399-gmac", (uintptr_t)&rk3399_ops},
Add support for RK3288 into existing RockChip drivers. This patch ensures only minimal level of compatibility necessary to boot on RK3288 based boards. GPIO and pinctrl interaction, missing in current implementation, will be improved by own patch in the near future. MFC after: 2 weeks MFC with: r351452
2019-08-27 09:20:01 +00:00
{NULL, 0}
};
if_dwc_rk: Add DesignWare driver for RockChip SoCs. Add driver for the designware ethernet controller found in some RockChip SoCs. The driver still rely on a lot of things setup by the bootloader like clocks and phy mode. But since netbooting is the only/easiest way to boot rockchip board at the moment add the driver so other people can test/dev on thoses boards.
2018-06-14 06:28:09 +00:00
static void
Improve Rockchip's integration of if_dwc - Do not rely on U-Boot for clocks configuration, enable and set frequencies in the driver's attach method. - Adjust MAC settings according to detected linespeed on RK3399 and RK3328. - Add support for RMII PHY mode on RK3328. Reviewed by: manu Differential Revision: https://reviews.freebsd.org/D26006
2020-08-10 19:37:06 +00:00
rk3328_set_delays(struct if_dwc_rk_softc *sc)
if_dwc_rk: Add DesignWare driver for RockChip SoCs. Add driver for the designware ethernet controller found in some RockChip SoCs. The driver still rely on a lot of things setup by the bootloader like clocks and phy mode. But since netbooting is the only/easiest way to boot rockchip board at the moment add the driver so other people can test/dev on thoses boards.
2018-06-14 06:28:09 +00:00
{
Improve Rockchip's integration of if_dwc - Do not rely on U-Boot for clocks configuration, enable and set frequencies in the driver's attach method. - Adjust MAC settings according to detected linespeed on RK3399 and RK3328. - Add support for RMII PHY mode on RK3328. Reviewed by: manu Differential Revision: https://reviews.freebsd.org/D26006
2020-08-10 19:37:06 +00:00
uint32_t reg;
if_dwc_rk: Add DesignWare driver for RockChip SoCs. Add driver for the designware ethernet controller found in some RockChip SoCs. The driver still rely on a lot of things setup by the bootloader like clocks and phy mode. But since netbooting is the only/easiest way to boot rockchip board at the moment add the driver so other people can test/dev on thoses boards.
2018-06-14 06:28:09 +00:00
uint32_t tx, rx;
Improve Rockchip's integration of if_dwc - Do not rely on U-Boot for clocks configuration, enable and set frequencies in the driver's attach method. - Adjust MAC settings according to detected linespeed on RK3399 and RK3328. - Add support for RMII PHY mode on RK3328. Reviewed by: manu Differential Revision: https://reviews.freebsd.org/D26006
2020-08-10 19:37:06 +00:00
if (sc->base.phy_mode != PHY_MODE_RGMII)
return;
reg = SYSCON_READ_4(sc->grf, RK3328_GRF_MAC_CON0);
tx = ((reg >> MAC_CON0_GMAC2IO_TX_DL_CFG_SHIFT) & MAC_CON0_GMAC2IO_TX_DL_CFG_MASK);
rx = ((reg >> MAC_CON0_GMAC2IO_RX_DL_CFG_SHIFT) & MAC_CON0_GMAC2IO_RX_DL_CFG_MASK);
reg = SYSCON_READ_4(sc->grf, RK3328_GRF_MAC_CON1);
if (bootverbose) {
device_printf(sc->base.dev, "current delays settings: tx=%u(%s) rx=%u(%s)\n",
tx, ((reg & MAC_CON1_GMAC2IO_GMAC_TXCLK_DLY_ENA) ? "enabled" : "disabled"),
rx, ((reg & MAC_CON1_GMAC2IO_GMAC_RXCLK_DLY_ENA) ? "enabled" : "disabled"));
if_dwc_rk: Add DesignWare driver for RockChip SoCs. Add driver for the designware ethernet controller found in some RockChip SoCs. The driver still rely on a lot of things setup by the bootloader like clocks and phy mode. But since netbooting is the only/easiest way to boot rockchip board at the moment add the driver so other people can test/dev on thoses boards.
2018-06-14 06:28:09 +00:00
Improve Rockchip's integration of if_dwc - Do not rely on U-Boot for clocks configuration, enable and set frequencies in the driver's attach method. - Adjust MAC settings according to detected linespeed on RK3399 and RK3328. - Add support for RMII PHY mode on RK3328. Reviewed by: manu Differential Revision: https://reviews.freebsd.org/D26006
2020-08-10 19:37:06 +00:00
device_printf(sc->base.dev, "setting new RK3328 RX/TX delays: %d/%d\n",
sc->tx_delay, sc->rx_delay);
}
reg = (MAC_CON1_GMAC2IO_GMAC_TXCLK_DLY_ENA | MAC_CON1_GMAC2IO_GMAC_RXCLK_DLY_ENA) << 16;
reg |= (MAC_CON1_GMAC2IO_GMAC_TXCLK_DLY_ENA | MAC_CON1_GMAC2IO_GMAC_RXCLK_DLY_ENA);
SYSCON_WRITE_4(sc->grf, RK3328_GRF_MAC_CON1, reg);
if_rk_dwc: Fix delays handling The property are named {t,r}x_delay and not {t,r}-delay. The upper bits of the register are a mask of which bits is allowed to be written, set it otherwise we write nothing. OF_getencprop returns <0 = for an error. Pointy Hat: myself Reported by: jmcneill (delay and mask bits)
2018-06-20 14:45:26 +00:00
Improve Rockchip's integration of if_dwc - Do not rely on U-Boot for clocks configuration, enable and set frequencies in the driver's attach method. - Adjust MAC settings according to detected linespeed on RK3399 and RK3328. - Add support for RMII PHY mode on RK3328. Reviewed by: manu Differential Revision: https://reviews.freebsd.org/D26006
2020-08-10 19:37:06 +00:00
reg = 0xffff << 16;
reg |= ((sc->tx_delay & MAC_CON0_GMAC2IO_TX_DL_CFG_MASK) <<
MAC_CON0_GMAC2IO_TX_DL_CFG_SHIFT);
reg |= ((sc->rx_delay & MAC_CON0_GMAC2IO_TX_DL_CFG_MASK) <<
MAC_CON0_GMAC2IO_RX_DL_CFG_SHIFT);
SYSCON_WRITE_4(sc->grf, RK3328_GRF_MAC_CON0, reg);
arm64/rockchip: add RK3399 support Add CRU (Clock and Reset Unit) driver for RK3399. Add support in rk_pinctrl driver. Submitted by: Greg V <greg@unrelenting.technology> (Original version) Differential Revision: https://reviews.freebsd.org/D16732 MFC after: 1 month
2018-12-01 20:28:16 +00:00
}
Improve Rockchip's integration of if_dwc - Do not rely on U-Boot for clocks configuration, enable and set frequencies in the driver's attach method. - Adjust MAC settings according to detected linespeed on RK3399 and RK3328. - Add support for RMII PHY mode on RK3328. Reviewed by: manu Differential Revision: https://reviews.freebsd.org/D26006
2020-08-10 19:37:06 +00:00
static int
rk3328_set_speed(struct if_dwc_rk_softc *sc, int speed)
{
uint32_t reg;
switch (sc->base.phy_mode) {
case PHY_MODE_RGMII:
switch (speed) {
case IFM_1000_T:
case IFM_1000_SX:
reg = MAC_CON1_GMAC2IO_GMII_CLK_SEL_125;
break;
case IFM_100_TX:
reg = MAC_CON1_GMAC2IO_GMII_CLK_SEL_25;
break;
case IFM_10_T:
reg = MAC_CON1_GMAC2IO_GMII_CLK_SEL_2_5;
break;
default:
device_printf(sc->base.dev, "unsupported RGMII media %u\n", speed);
return (-1);
}
SYSCON_WRITE_4(sc->grf, RK3328_GRF_MAC_CON1,
((MAC_CON1_GMAC2IO_GMII_CLK_SEL_MASK << 16) | reg));
break;
case PHY_MODE_RMII:
switch (speed) {
case IFM_100_TX:
reg = MAC_CON1_GMAC2IO_RMII_CLK_SEL_25 |
MAC_CON1_GMAC2IO_MAC_SPEED_100;
break;
case IFM_10_T:
reg = MAC_CON1_GMAC2IO_RMII_CLK_SEL_2_5 |
MAC_CON1_GMAC2IO_MAC_SPEED_10;
break;
default:
device_printf(sc->base.dev, "unsupported RMII media %u\n", speed);
return (-1);
}
SYSCON_WRITE_4(sc->grf,
sc->integrated_phy ? RK3328_GRF_MAC_CON2 : RK3328_GRF_MAC_CON1,
reg |
((MAC_CON1_GMAC2IO_RMII_CLK_SEL_MASK | MAC_CON1_GMAC2IO_MAC_SPEED_MASK) << 16));
break;
}
return (0);
}
arm64/rockchip: add RK3399 support Add CRU (Clock and Reset Unit) driver for RK3399. Add support in rk_pinctrl driver. Submitted by: Greg V <greg@unrelenting.technology> (Original version) Differential Revision: https://reviews.freebsd.org/D16732 MFC after: 1 month
2018-12-01 20:28:16 +00:00
static void
Improve Rockchip's integration of if_dwc - Do not rely on U-Boot for clocks configuration, enable and set frequencies in the driver's attach method. - Adjust MAC settings according to detected linespeed on RK3399 and RK3328. - Add support for RMII PHY mode on RK3328. Reviewed by: manu Differential Revision: https://reviews.freebsd.org/D26006
2020-08-10 19:37:06 +00:00
rk3328_set_phy_mode(struct if_dwc_rk_softc *sc)
arm64/rockchip: add RK3399 support Add CRU (Clock and Reset Unit) driver for RK3399. Add support in rk_pinctrl driver. Submitted by: Greg V <greg@unrelenting.technology> (Original version) Differential Revision: https://reviews.freebsd.org/D16732 MFC after: 1 month
2018-12-01 20:28:16 +00:00
{
Improve Rockchip's integration of if_dwc - Do not rely on U-Boot for clocks configuration, enable and set frequencies in the driver's attach method. - Adjust MAC settings according to detected linespeed on RK3399 and RK3328. - Add support for RMII PHY mode on RK3328. Reviewed by: manu Differential Revision: https://reviews.freebsd.org/D26006
2020-08-10 19:37:06 +00:00
switch (sc->base.phy_mode) {
case PHY_MODE_RGMII:
SYSCON_WRITE_4(sc->grf, RK3328_GRF_MAC_CON1,
((MAC_CON1_GMAC2IO_INTF_SEL_MASK | MAC_CON1_GMAC2IO_RMII_MODE_MASK) << 16) |
MAC_CON1_GMAC2IO_INTF_RGMII);
break;
case PHY_MODE_RMII:
SYSCON_WRITE_4(sc->grf, sc->integrated_phy ? RK3328_GRF_MAC_CON2 : RK3328_GRF_MAC_CON1,
((MAC_CON1_GMAC2IO_INTF_SEL_MASK | MAC_CON1_GMAC2IO_RMII_MODE_MASK) << 16) |
MAC_CON1_GMAC2IO_INTF_RMII | MAC_CON1_GMAC2IO_RMII_MODE);
break;
}
}
static void
rk3328_phy_powerup(struct if_dwc_rk_softc *sc)
{
SYSCON_WRITE_4(sc->grf, RK3328_GRF_MACPHY_CON1,
(MACPHY_CON1_RMII_MODE_MASK << 16) |
MACPHY_CON1_RMII_MODE);
}
static void
rk3399_set_delays(struct if_dwc_rk_softc *sc)
{
uint32_t reg, tx, rx;
if (sc->base.phy_mode != PHY_MODE_RGMII)
return;
arm64/rockchip: add RK3399 support Add CRU (Clock and Reset Unit) driver for RK3399. Add support in rk_pinctrl driver. Submitted by: Greg V <greg@unrelenting.technology> (Original version) Differential Revision: https://reviews.freebsd.org/D16732 MFC after: 1 month
2018-12-01 20:28:16 +00:00
Improve Rockchip's integration of if_dwc - Do not rely on U-Boot for clocks configuration, enable and set frequencies in the driver's attach method. - Adjust MAC settings according to detected linespeed on RK3399 and RK3328. - Add support for RMII PHY mode on RK3328. Reviewed by: manu Differential Revision: https://reviews.freebsd.org/D26006
2020-08-10 19:37:06 +00:00
reg = SYSCON_READ_4(sc->grf, RK3399_GRF_SOC_CON6);
tx = ((reg >> SOC_CON6_TX_DL_CFG_SHIFT) & SOC_CON6_TX_DL_CFG_MASK);
rx = ((reg >> SOC_CON6_RX_DL_CFG_SHIFT) & SOC_CON6_RX_DL_CFG_MASK);
arm64/rockchip: add RK3399 support Add CRU (Clock and Reset Unit) driver for RK3399. Add support in rk_pinctrl driver. Submitted by: Greg V <greg@unrelenting.technology> (Original version) Differential Revision: https://reviews.freebsd.org/D16732 MFC after: 1 month
2018-12-01 20:28:16 +00:00
Improve Rockchip's integration of if_dwc - Do not rely on U-Boot for clocks configuration, enable and set frequencies in the driver's attach method. - Adjust MAC settings according to detected linespeed on RK3399 and RK3328. - Add support for RMII PHY mode on RK3328. Reviewed by: manu Differential Revision: https://reviews.freebsd.org/D26006
2020-08-10 19:37:06 +00:00
if (bootverbose) {
device_printf(sc->base.dev, "current delays settings: tx=%u(%s) rx=%u(%s)\n",
tx, ((reg & SOC_CON6_GMAC_TXCLK_DLY_ENA) ? "enabled" : "disabled"),
rx, ((reg & SOC_CON6_GMAC_RXCLK_DLY_ENA) ? "enabled" : "disabled"));
device_printf(sc->base.dev, "setting new RK3399 RX/TX delays: %d/%d\n",
sc->rx_delay, sc->tx_delay);
}
reg = 0xFFFF << 16;
reg |= ((sc->tx_delay & SOC_CON6_TX_DL_CFG_MASK) <<
SOC_CON6_TX_DL_CFG_SHIFT);
reg |= ((sc->rx_delay & SOC_CON6_RX_DL_CFG_MASK) <<
SOC_CON6_RX_DL_CFG_SHIFT);
reg |= SOC_CON6_GMAC_TXCLK_DLY_ENA | SOC_CON6_GMAC_RXCLK_DLY_ENA;
SYSCON_WRITE_4(sc->grf, RK3399_GRF_SOC_CON6, reg);
}
static int
rk3399_set_speed(struct if_dwc_rk_softc *sc, int speed)
{
uint32_t reg;
switch (speed) {
case IFM_1000_T:
case IFM_1000_SX:
reg = SOC_CON5_GMAC_CLK_SEL_125;
break;
case IFM_100_TX:
reg = SOC_CON5_GMAC_CLK_SEL_25;
break;
case IFM_10_T:
reg = SOC_CON5_GMAC_CLK_SEL_2_5;
break;
default:
device_printf(sc->base.dev, "unsupported media %u\n", speed);
return (-1);
}
SYSCON_WRITE_4(sc->grf, RK3399_GRF_SOC_CON5,
((SOC_CON5_GMAC_CLK_SEL_MASK << 16) | reg));
return (0);
}
static int
if_dwc_rk_sysctl_delays(SYSCTL_HANDLER_ARGS)
{
struct if_dwc_rk_softc *sc;
int rv;
uint32_t rxtx;
sc = arg1;
rxtx = ((sc->rx_delay << 8) | sc->tx_delay);
rv = sysctl_handle_int(oidp, &rxtx, 0, req);
if (rv != 0 || req->newptr == NULL)
return (rv);
sc->tx_delay = rxtx & 0xff;
sc->rx_delay = (rxtx >> 8) & 0xff;
if (sc->ops->set_delays)
sc->ops->set_delays(sc);
return (0);
}
static int
if_dwc_rk_init_sysctl(struct if_dwc_rk_softc *sc)
{
struct sysctl_oid *child;
struct sysctl_ctx_list *ctx_list;
ctx_list = device_get_sysctl_ctx(sc->base.dev);
child = device_get_sysctl_tree(sc->base.dev);
SYSCTL_ADD_PROC(ctx_list,
SYSCTL_CHILDREN(child), OID_AUTO, "delays",
CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_RWTUN | CTLFLAG_MPSAFE, sc, 0,
if_dwc_rk_sysctl_delays, "", "RGMII RX/TX delays: ((rx << 8) | tx)");
return (0);
if_dwc_rk: Add DesignWare driver for RockChip SoCs. Add driver for the designware ethernet controller found in some RockChip SoCs. The driver still rely on a lot of things setup by the bootloader like clocks and phy mode. But since netbooting is the only/easiest way to boot rockchip board at the moment add the driver so other people can test/dev on thoses boards.
2018-06-14 06:28:09 +00:00
}
static int
if_dwc_rk_probe(device_t dev)
{
if (!ofw_bus_status_okay(dev))
return (ENXIO);
Add support for RK3288 into existing RockChip drivers. This patch ensures only minimal level of compatibility necessary to boot on RK3288 based boards. GPIO and pinctrl interaction, missing in current implementation, will be improved by own patch in the near future. MFC after: 2 weeks MFC with: r351452
2019-08-27 09:20:01 +00:00
if (ofw_bus_search_compatible(dev, compat_data)->ocd_data == 0)
if_dwc_rk: Add DesignWare driver for RockChip SoCs. Add driver for the designware ethernet controller found in some RockChip SoCs. The driver still rely on a lot of things setup by the bootloader like clocks and phy mode. But since netbooting is the only/easiest way to boot rockchip board at the moment add the driver so other people can test/dev on thoses boards.
2018-06-14 06:28:09 +00:00
return (ENXIO);
device_set_desc(dev, "Rockchip Gigabit Ethernet Controller");
return (BUS_PROBE_DEFAULT);
}
Improve Rockchip's integration of if_dwc - Do not rely on U-Boot for clocks configuration, enable and set frequencies in the driver's attach method. - Adjust MAC settings according to detected linespeed on RK3399 and RK3328. - Add support for RMII PHY mode on RK3328. Reviewed by: manu Differential Revision: https://reviews.freebsd.org/D26006
2020-08-10 19:37:06 +00:00
static int
if_dwc_rk_init_clocks(device_t dev)
{
struct if_dwc_rk_softc *sc;
int error;
sc = device_get_softc(dev);
error = clk_set_assigned(dev, ofw_bus_get_node(dev));
if (error != 0) {
device_printf(dev, "clk_set_assigned failed\n");
return (error);
}
/* Enable clocks */
error = clk_get_by_ofw_name(dev, 0, "stmmaceth", &sc->clk_stmmaceth);
if (error != 0) {
device_printf(dev, "could not find clock stmmaceth\n");
return (error);
}
if (clk_get_by_ofw_name(dev, 0, "mac_clk_rx", &sc->mac_clk_rx) != 0) {
device_printf(sc->base.dev, "could not get mac_clk_rx clock\n");
sc->mac_clk_rx = NULL;
}
if (clk_get_by_ofw_name(dev, 0, "mac_clk_tx", &sc->mac_clk_tx) != 0) {
device_printf(sc->base.dev, "could not get mac_clk_tx clock\n");
sc->mac_clk_tx = NULL;
}
if (clk_get_by_ofw_name(dev, 0, "aclk_mac", &sc->aclk_mac) != 0) {
device_printf(sc->base.dev, "could not get aclk_mac clock\n");
sc->aclk_mac = NULL;
}
if (clk_get_by_ofw_name(dev, 0, "pclk_mac", &sc->pclk_mac) != 0) {
device_printf(sc->base.dev, "could not get pclk_mac clock\n");
sc->pclk_mac = NULL;
}
if (sc->base.phy_mode == PHY_MODE_RGMII) {
if (clk_get_by_ofw_name(dev, 0, "clk_mac_ref", &sc->clk_mac_ref) != 0) {
device_printf(sc->base.dev, "could not get clk_mac_ref clock\n");
sc->clk_mac_ref = NULL;
}
if (!sc->clock_in) {
if (clk_get_by_ofw_name(dev, 0, "clk_mac_refout", &sc->clk_mac_refout) != 0) {
device_printf(sc->base.dev, "could not get clk_mac_refout clock\n");
sc->clk_mac_refout = NULL;
}
clk_set_freq(sc->clk_stmmaceth, 50000000, 0);
}
}
if ((sc->phy_node != 0) && sc->integrated_phy) {
if (clk_get_by_ofw_index(dev, sc->phy_node, 0, &sc->clk_phy) != 0) {
device_printf(sc->base.dev, "could not get PHY clock\n");
sc->clk_phy = NULL;
}
if (sc->clk_phy) {
clk_set_freq(sc->clk_phy, 50000000, 0);
}
}
if (sc->base.phy_mode == PHY_MODE_RMII) {
if (sc->mac_clk_rx)
clk_enable(sc->mac_clk_rx);
if (sc->clk_mac_ref)
clk_enable(sc->clk_mac_ref);
if (sc->clk_mac_refout)
clk_enable(sc->clk_mac_refout);
}
if (sc->clk_phy)
clk_enable(sc->clk_phy);
if (sc->aclk_mac)
clk_enable(sc->aclk_mac);
if (sc->pclk_mac)
clk_enable(sc->pclk_mac);
if (sc->mac_clk_tx)
clk_enable(sc->mac_clk_tx);
DELAY(50);
return (0);
}
if_dwc_rk: Add DesignWare driver for RockChip SoCs. Add driver for the designware ethernet controller found in some RockChip SoCs. The driver still rely on a lot of things setup by the bootloader like clocks and phy mode. But since netbooting is the only/easiest way to boot rockchip board at the moment add the driver so other people can test/dev on thoses boards.
2018-06-14 06:28:09 +00:00
static int
if_dwc_rk_init(device_t dev)
{
Improve Rockchip's integration of if_dwc - Do not rely on U-Boot for clocks configuration, enable and set frequencies in the driver's attach method. - Adjust MAC settings according to detected linespeed on RK3399 and RK3328. - Add support for RMII PHY mode on RK3328. Reviewed by: manu Differential Revision: https://reviews.freebsd.org/D26006
2020-08-10 19:37:06 +00:00
struct if_dwc_rk_softc *sc;
if_dwc_rk: Add DesignWare driver for RockChip SoCs. Add driver for the designware ethernet controller found in some RockChip SoCs. The driver still rely on a lot of things setup by the bootloader like clocks and phy mode. But since netbooting is the only/easiest way to boot rockchip board at the moment add the driver so other people can test/dev on thoses boards.
2018-06-14 06:28:09 +00:00
phandle_t node;
Improve Rockchip's integration of if_dwc - Do not rely on U-Boot for clocks configuration, enable and set frequencies in the driver's attach method. - Adjust MAC settings according to detected linespeed on RK3399 and RK3328. - Add support for RMII PHY mode on RK3328. Reviewed by: manu Differential Revision: https://reviews.freebsd.org/D26006
2020-08-10 19:37:06 +00:00
uint32_t rx, tx;
int err;
pcell_t phy_handle;
char *clock_in_out;
hwreset_t phy_reset;
regulator_t phy_supply;
sc = device_get_softc(dev);
if_dwc_rk: Add DesignWare driver for RockChip SoCs. Add driver for the designware ethernet controller found in some RockChip SoCs. The driver still rely on a lot of things setup by the bootloader like clocks and phy mode. But since netbooting is the only/easiest way to boot rockchip board at the moment add the driver so other people can test/dev on thoses boards.
2018-06-14 06:28:09 +00:00
node = ofw_bus_get_node(dev);
Improve Rockchip's integration of if_dwc - Do not rely on U-Boot for clocks configuration, enable and set frequencies in the driver's attach method. - Adjust MAC settings according to detected linespeed on RK3399 and RK3328. - Add support for RMII PHY mode on RK3328. Reviewed by: manu Differential Revision: https://reviews.freebsd.org/D26006
2020-08-10 19:37:06 +00:00
sc->ops = (struct if_dwc_rk_ops *)ofw_bus_search_compatible(dev, compat_data)->ocd_data;
if_dwc_rk: Add DesignWare driver for RockChip SoCs. Add driver for the designware ethernet controller found in some RockChip SoCs. The driver still rely on a lot of things setup by the bootloader like clocks and phy mode. But since netbooting is the only/easiest way to boot rockchip board at the moment add the driver so other people can test/dev on thoses boards.
2018-06-14 06:28:09 +00:00
if (OF_hasprop(node, "rockchip,grf") &&
syscon_get_by_ofw_property(dev, node,
Improve Rockchip's integration of if_dwc - Do not rely on U-Boot for clocks configuration, enable and set frequencies in the driver's attach method. - Adjust MAC settings according to detected linespeed on RK3399 and RK3328. - Add support for RMII PHY mode on RK3328. Reviewed by: manu Differential Revision: https://reviews.freebsd.org/D26006
2020-08-10 19:37:06 +00:00
"rockchip,grf", &sc->grf) != 0) {
if_dwc_rk: Add DesignWare driver for RockChip SoCs. Add driver for the designware ethernet controller found in some RockChip SoCs. The driver still rely on a lot of things setup by the bootloader like clocks and phy mode. But since netbooting is the only/easiest way to boot rockchip board at the moment add the driver so other people can test/dev on thoses boards.
2018-06-14 06:28:09 +00:00
device_printf(dev, "cannot get grf driver handle\n");
return (ENXIO);
}
Improve Rockchip's integration of if_dwc - Do not rely on U-Boot for clocks configuration, enable and set frequencies in the driver's attach method. - Adjust MAC settings according to detected linespeed on RK3399 and RK3328. - Add support for RMII PHY mode on RK3328. Reviewed by: manu Differential Revision: https://reviews.freebsd.org/D26006
2020-08-10 19:37:06 +00:00
if (OF_getencprop(node, "tx_delay", &tx, sizeof(tx)) <= 0)
tx = 0x30;
if (OF_getencprop(node, "rx_delay", &rx, sizeof(rx)) <= 0)
rx = 0x10;
sc->tx_delay = tx;
sc->rx_delay = rx;
sc->clock_in = true;
if (OF_getprop_alloc(node, "clock_in_out", (void **)&clock_in_out)) {
if (strcmp(clock_in_out, "input") == 0)
sc->clock_in = true;
else
sc->clock_in = false;
OF_prop_free(clock_in_out);
}
if (OF_getencprop(node, "phy-handle", (void *)&phy_handle,
sizeof(phy_handle)) > 0)
sc->phy_node = OF_node_from_xref(phy_handle);
if (sc->phy_node)
sc->integrated_phy = OF_hasprop(sc->phy_node, "phy-is-integrated");
if_dwc_rk: Add DesignWare driver for RockChip SoCs. Add driver for the designware ethernet controller found in some RockChip SoCs. The driver still rely on a lot of things setup by the bootloader like clocks and phy mode. But since netbooting is the only/easiest way to boot rockchip board at the moment add the driver so other people can test/dev on thoses boards.
2018-06-14 06:28:09 +00:00
Improve Rockchip's integration of if_dwc - Do not rely on U-Boot for clocks configuration, enable and set frequencies in the driver's attach method. - Adjust MAC settings according to detected linespeed on RK3399 and RK3328. - Add support for RMII PHY mode on RK3328. Reviewed by: manu Differential Revision: https://reviews.freebsd.org/D26006
2020-08-10 19:37:06 +00:00
if (sc->integrated_phy)
device_printf(sc->base.dev, "PHY is integrated\n");
if_dwc_rk_init_clocks(dev);
if (sc->ops->set_phy_mode)
sc->ops->set_phy_mode(sc);
if (sc->ops->set_delays)
sc->ops->set_delays(sc);
/*
* this also sets delays if tunable is defined
*/
err = if_dwc_rk_init_sysctl(sc);
if (err != 0)
return (err);
if (regulator_get_by_ofw_property(sc->base.dev, 0,
"phy-supply", &phy_supply) == 0) {
if (regulator_enable(phy_supply)) {
device_printf(sc->base.dev,
"cannot enable 'phy' regulator\n");
}
}
else
device_printf(sc->base.dev, "no phy-supply property\n");
/* Power up */
if (sc->integrated_phy) {
if (sc->ops->phy_powerup)
sc->ops->phy_powerup(sc);
SYSCON_WRITE_4(sc->grf, RK3328_GRF_MACPHY_CON0,
(MACPHY_CON0_CLK_50M_MASK << 16) |
MACPHY_CON0_CLK_50M);
SYSCON_WRITE_4(sc->grf, RK3328_GRF_MACPHY_CON0,
(MACPHY_CON0_RMII_MODE_MASK << 16) |
MACPHY_CON0_RMII_MODE);
SYSCON_WRITE_4(sc->grf, RK3328_GRF_MACPHY_CON2, 0xffff1234);
SYSCON_WRITE_4(sc->grf, RK3328_GRF_MACPHY_CON3, 0x003f0035);
if (hwreset_get_by_ofw_idx(dev, sc->phy_node, 0, &phy_reset) == 0) {
hwreset_assert(phy_reset);
DELAY(20);
hwreset_deassert(phy_reset);
DELAY(20);
}
}
if_dwc_rk: Add DesignWare driver for RockChip SoCs. Add driver for the designware ethernet controller found in some RockChip SoCs. The driver still rely on a lot of things setup by the bootloader like clocks and phy mode. But since netbooting is the only/easiest way to boot rockchip board at the moment add the driver so other people can test/dev on thoses boards.
2018-06-14 06:28:09 +00:00
return (0);
}
static int
if_dwc_rk_mac_type(device_t dev)
{
Finish renaming in if_dwc. By using DWC TRM terminology, normal descriptor format should be named extended and alternate descriptor format should be named normal. Should not been functional change. MFC after: 4 weeks
2020-06-19 18:34:27 +00:00
return (DWC_GMAC_NORMAL_DESC);
if_dwc_rk: Add DesignWare driver for RockChip SoCs. Add driver for the designware ethernet controller found in some RockChip SoCs. The driver still rely on a lot of things setup by the bootloader like clocks and phy mode. But since netbooting is the only/easiest way to boot rockchip board at the moment add the driver so other people can test/dev on thoses boards.
2018-06-14 06:28:09 +00:00
}
static int
if_dwc_rk_mii_clk(device_t dev)
{
/* Should be calculated from the clock */
return (GMAC_MII_CLK_150_250M_DIV102);
}
Improve Rockchip's integration of if_dwc - Do not rely on U-Boot for clocks configuration, enable and set frequencies in the driver's attach method. - Adjust MAC settings according to detected linespeed on RK3399 and RK3328. - Add support for RMII PHY mode on RK3328. Reviewed by: manu Differential Revision: https://reviews.freebsd.org/D26006
2020-08-10 19:37:06 +00:00
static int
if_dwc_rk_set_speed(device_t dev, int speed)
{
struct if_dwc_rk_softc *sc;
sc = device_get_softc(dev);
if (sc->ops->set_speed)
return sc->ops->set_speed(sc, speed);
return (0);
}
if_dwc_rk: Add DesignWare driver for RockChip SoCs. Add driver for the designware ethernet controller found in some RockChip SoCs. The driver still rely on a lot of things setup by the bootloader like clocks and phy mode. But since netbooting is the only/easiest way to boot rockchip board at the moment add the driver so other people can test/dev on thoses boards.
2018-06-14 06:28:09 +00:00
static device_method_t if_dwc_rk_methods[] = {
DEVMETHOD(device_probe, if_dwc_rk_probe),
DEVMETHOD(if_dwc_init, if_dwc_rk_init),
DEVMETHOD(if_dwc_mac_type, if_dwc_rk_mac_type),
DEVMETHOD(if_dwc_mii_clk, if_dwc_rk_mii_clk),
Improve Rockchip's integration of if_dwc - Do not rely on U-Boot for clocks configuration, enable and set frequencies in the driver's attach method. - Adjust MAC settings according to detected linespeed on RK3399 and RK3328. - Add support for RMII PHY mode on RK3328. Reviewed by: manu Differential Revision: https://reviews.freebsd.org/D26006
2020-08-10 19:37:06 +00:00
DEVMETHOD(if_dwc_set_speed, if_dwc_rk_set_speed),
if_dwc_rk: Add DesignWare driver for RockChip SoCs. Add driver for the designware ethernet controller found in some RockChip SoCs. The driver still rely on a lot of things setup by the bootloader like clocks and phy mode. But since netbooting is the only/easiest way to boot rockchip board at the moment add the driver so other people can test/dev on thoses boards.
2018-06-14 06:28:09 +00:00
DEVMETHOD_END
};
static devclass_t dwc_rk_devclass;
extern driver_t dwc_driver;
DEFINE_CLASS_1(dwc, dwc_rk_driver, if_dwc_rk_methods,
Improve Rockchip's integration of if_dwc - Do not rely on U-Boot for clocks configuration, enable and set frequencies in the driver's attach method. - Adjust MAC settings according to detected linespeed on RK3399 and RK3328. - Add support for RMII PHY mode on RK3328. Reviewed by: manu Differential Revision: https://reviews.freebsd.org/D26006
2020-08-10 19:37:06 +00:00
sizeof(struct if_dwc_rk_softc), dwc_driver);
if_dwc_rk: Add DesignWare driver for RockChip SoCs. Add driver for the designware ethernet controller found in some RockChip SoCs. The driver still rely on a lot of things setup by the bootloader like clocks and phy mode. But since netbooting is the only/easiest way to boot rockchip board at the moment add the driver so other people can test/dev on thoses boards.
2018-06-14 06:28:09 +00:00
DRIVER_MODULE(dwc_rk, simplebus, dwc_rk_driver, dwc_rk_devclass, 0, 0);
MODULE_DEPEND(dwc_rk, dwc, 1, 1, 1);
Reference in New Issue Copy Permalink