Oops, I missed these when I imported the Stallion drivers.
Add samples and some info to LINT (and a pointer to the real docs)
This commit is contained in:
Peter Wemm
parent
08f4fc1aa8
commit
c9da1b81d5
@ -2,7 +2,7 @@
|
||||
# LINT -- config file for checking all the sources, tries to pull in
|
||||
# as much of the source tree as it can.
|
||||
#
|
||||
# $Id: LINT,v 1.254 1996/05/02 10:41:18 phk Exp $
|
||||
# $Id: LINT,v 1.255 1996/05/03 05:44:44 asami Exp $
|
||||
#
|
||||
# NB: You probably don't want to try running a kernel built from this
|
||||
# file. Instead, you should start from GENERIC, and add options from
|
||||
@ -726,6 +726,8 @@ device pca0 at isa? port IO_TIMER1 tty
|
||||
# rc: RISCom/8 multiport card
|
||||
# tw: TW-523 power line interface for use with X-10 home control products
|
||||
# si: Specialix SI/XIO 4-32 port terminal multiplexor
|
||||
# stl: Stallion EasyIO and EasyConnection 8/32 (cd1400 based)
|
||||
# stli: Stallion EasyConnection 8/64, ONboard, Brumby (intelligent)
|
||||
|
||||
#
|
||||
# Notes on APM
|
||||
@ -761,6 +763,21 @@ device pca0 at isa? port IO_TIMER1 tty
|
||||
# The Rev 2 host cards use a 32K chunk, on a 32K boundary.
|
||||
# The cards can use an IRQ of 11, 12 or 15.
|
||||
|
||||
# Notes on the Stallion stl and stli drivers:
|
||||
# See src/i386/isa/README.stl for complete instructions.
|
||||
# This is version 0.0.5alpha, unsupported by Stallion.
|
||||
# The stl driver has a secondary IO port hard coded at 0x280. You need
|
||||
# to change src/i386/isa/stallion.c if you reconfigure this on the boards.
|
||||
# The "flags" and "iosiz" settings on the stli driver depend on the board:
|
||||
# EasyConnection 8/64 ISA: flags 23 iosiz 0x1000
|
||||
# EasyConnection 8/64 EISA: flags 24 iosiz 0x10000
|
||||
# EasyConnection 8/64 MCA: flags 25 iosiz 0x1000
|
||||
# ONboard ISA: flags 4 iosiz 0x10000
|
||||
# ONboard EISA: flags 7 iosiz 0x10000
|
||||
# ONboard MCA: flags 3 iosiz 0x10000
|
||||
# Brumby: flags 2 iosiz 0x4000
|
||||
# Stallion: flags 1 iosiz 0x10000
|
||||
|
||||
device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr
|
||||
# for the Sony CDU31/33A CDROM
|
||||
device scd0 at isa? port 0x230 bio
|
||||
@ -784,6 +801,8 @@ device tw0 at isa? port 0x380 tty irq 11 vector twintr
|
||||
device si0 at isa? iomem 0xd0000 tty irq 12 vector siintr
|
||||
device asc0 at isa? port IO_ASC1 tty drq 3 irq 10 vector ascintr
|
||||
device bqu0 at isa? port 0x150
|
||||
device stl0 at isa? port 0x2a0 tty irq 10 vector stlintr
|
||||
device stli0 at isa? port 0x2a0 tty iomem 0xcc000 flags 23 iosiz 0x1000
|
||||
|
||||
#
|
||||
# EISA devices:
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
# LINT -- config file for checking all the sources, tries to pull in
|
||||
# as much of the source tree as it can.
|
||||
#
|
||||
# $Id: LINT,v 1.254 1996/05/02 10:41:18 phk Exp $
|
||||
# $Id: LINT,v 1.255 1996/05/03 05:44:44 asami Exp $
|
||||
#
|
||||
# NB: You probably don't want to try running a kernel built from this
|
||||
# file. Instead, you should start from GENERIC, and add options from
|
||||
@ -726,6 +726,8 @@ device pca0 at isa? port IO_TIMER1 tty
|
||||
# rc: RISCom/8 multiport card
|
||||
# tw: TW-523 power line interface for use with X-10 home control products
|
||||
# si: Specialix SI/XIO 4-32 port terminal multiplexor
|
||||
# stl: Stallion EasyIO and EasyConnection 8/32 (cd1400 based)
|
||||
# stli: Stallion EasyConnection 8/64, ONboard, Brumby (intelligent)
|
||||
|
||||
#
|
||||
# Notes on APM
|
||||
@ -761,6 +763,21 @@ device pca0 at isa? port IO_TIMER1 tty
|
||||
# The Rev 2 host cards use a 32K chunk, on a 32K boundary.
|
||||
# The cards can use an IRQ of 11, 12 or 15.
|
||||
|
||||
# Notes on the Stallion stl and stli drivers:
|
||||
# See src/i386/isa/README.stl for complete instructions.
|
||||
# This is version 0.0.5alpha, unsupported by Stallion.
|
||||
# The stl driver has a secondary IO port hard coded at 0x280. You need
|
||||
# to change src/i386/isa/stallion.c if you reconfigure this on the boards.
|
||||
# The "flags" and "iosiz" settings on the stli driver depend on the board:
|
||||
# EasyConnection 8/64 ISA: flags 23 iosiz 0x1000
|
||||
# EasyConnection 8/64 EISA: flags 24 iosiz 0x10000
|
||||
# EasyConnection 8/64 MCA: flags 25 iosiz 0x1000
|
||||
# ONboard ISA: flags 4 iosiz 0x10000
|
||||
# ONboard EISA: flags 7 iosiz 0x10000
|
||||
# ONboard MCA: flags 3 iosiz 0x10000
|
||||
# Brumby: flags 2 iosiz 0x4000
|
||||
# Stallion: flags 1 iosiz 0x10000
|
||||
|
||||
device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr
|
||||
# for the Sony CDU31/33A CDROM
|
||||
device scd0 at isa? port 0x230 bio
|
||||
@ -784,6 +801,8 @@ device tw0 at isa? port 0x380 tty irq 11 vector twintr
|
||||
device si0 at isa? iomem 0xd0000 tty irq 12 vector siintr
|
||||
device asc0 at isa? port IO_ASC1 tty drq 3 irq 10 vector ascintr
|
||||
device bqu0 at isa? port 0x150
|
||||
device stl0 at isa? port 0x2a0 tty irq 10 vector stlintr
|
||||
device stli0 at isa? port 0x2a0 tty iomem 0xcc000 flags 23 iosiz 0x1000
|
||||
|
||||
#
|
||||
# EISA devices:
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
# LINT -- config file for checking all the sources, tries to pull in
|
||||
# as much of the source tree as it can.
|
||||
#
|
||||
# $Id: LINT,v 1.254 1996/05/02 10:41:18 phk Exp $
|
||||
# $Id: LINT,v 1.255 1996/05/03 05:44:44 asami Exp $
|
||||
#
|
||||
# NB: You probably don't want to try running a kernel built from this
|
||||
# file. Instead, you should start from GENERIC, and add options from
|
||||
@ -726,6 +726,8 @@ device pca0 at isa? port IO_TIMER1 tty
|
||||
# rc: RISCom/8 multiport card
|
||||
# tw: TW-523 power line interface for use with X-10 home control products
|
||||
# si: Specialix SI/XIO 4-32 port terminal multiplexor
|
||||
# stl: Stallion EasyIO and EasyConnection 8/32 (cd1400 based)
|
||||
# stli: Stallion EasyConnection 8/64, ONboard, Brumby (intelligent)
|
||||
|
||||
#
|
||||
# Notes on APM
|
||||
@ -761,6 +763,21 @@ device pca0 at isa? port IO_TIMER1 tty
|
||||
# The Rev 2 host cards use a 32K chunk, on a 32K boundary.
|
||||
# The cards can use an IRQ of 11, 12 or 15.
|
||||
|
||||
# Notes on the Stallion stl and stli drivers:
|
||||
# See src/i386/isa/README.stl for complete instructions.
|
||||
# This is version 0.0.5alpha, unsupported by Stallion.
|
||||
# The stl driver has a secondary IO port hard coded at 0x280. You need
|
||||
# to change src/i386/isa/stallion.c if you reconfigure this on the boards.
|
||||
# The "flags" and "iosiz" settings on the stli driver depend on the board:
|
||||
# EasyConnection 8/64 ISA: flags 23 iosiz 0x1000
|
||||
# EasyConnection 8/64 EISA: flags 24 iosiz 0x10000
|
||||
# EasyConnection 8/64 MCA: flags 25 iosiz 0x1000
|
||||
# ONboard ISA: flags 4 iosiz 0x10000
|
||||
# ONboard EISA: flags 7 iosiz 0x10000
|
||||
# ONboard MCA: flags 3 iosiz 0x10000
|
||||
# Brumby: flags 2 iosiz 0x4000
|
||||
# Stallion: flags 1 iosiz 0x10000
|
||||
|
||||
device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr
|
||||
# for the Sony CDU31/33A CDROM
|
||||
device scd0 at isa? port 0x230 bio
|
||||
@ -784,6 +801,8 @@ device tw0 at isa? port 0x380 tty irq 11 vector twintr
|
||||
device si0 at isa? iomem 0xd0000 tty irq 12 vector siintr
|
||||
device asc0 at isa? port IO_ASC1 tty drq 3 irq 10 vector ascintr
|
||||
device bqu0 at isa? port 0x150
|
||||
device stl0 at isa? port 0x2a0 tty irq 10 vector stlintr
|
||||
device stli0 at isa? port 0x2a0 tty iomem 0xcc000 flags 23 iosiz 0x1000
|
||||
|
||||
#
|
||||
# EISA devices:
|
||||
|
||||
Loading…
Reference in New Issue
Block a user