it to a random value between 100 and 1123, rather than 0 as before.
Submitted by: Marie Helene Kvello-Aune <marieheleneka@gmail.com>
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D5336
Since the efipart rewrite, the chain command was looking for device
handle using interface applicable only for net devices. Disk
partitions and zfs pools need their own approach to find the proper handle.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D12287
namecache_ts differs from mere namecache by few fields placed mid struct.
The access to the last element (the name) is thus special-cased.
The standard solution is to put new fields at the very beginning anad
embedd the original struct. The pointer shuffled around points to the
embedded part. If needed, access to new fields can be gained through
__containerof.
MFC after: 1 week
Permit a deflateParams() parameter change as soon as possible.
This change fixes compression errors seen when the embedded Tomcat
web server of a UniFi Controller zlib compresses responses. Given
that Tomcat just uses Java/OpenJDK which in turn employs zlib for
its compression/decompression support, this bug might very well
affect other applications, too.
PR: 222136
This commit allows a parameter change even if the input data has
not all been compressed and copied to the application output
buffer, so long as all of the input data has been compressed to
the internal pending output buffer. This also allows an immediate
deflateParams change so long as there have been no deflate calls
since initialization or reset.
Obtained from: upstream (f9694097dd69354b03cb8af959094c7f260db0a1)
This module is specific to a single Marvel board that we currently
only support in 64-bit mode. Remove it from the build otherwise. It
likely should be completely removed, but this unbreaks x86 building.
Noticed by: sbruno@
the driver in a place where it will be built for all targets. x86 doesn't
have all the required build bits for this device.
Move the uart(4) device mvebu to arm64 only.
lock if both old and new pages use the same underlying lock. Convert
existing places to use the helper instead of inlining it. Use the
optimization in vm_object_page_remove().
Suggested and reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
have a scope ID. Change size of the searched scope ID to the full
16-bits. There can typically be more than 255 interfaces.
Suggested by: ae @
MFC after: 1 week
Sponsored by: Mellanox Technologies
This patch enables using NETA driver on Marvell Armada 3700 SoC
by introducing new compatible string, modifying clock source
obtaining and also excluding unnecessary parts.
The driver is added as a build option for arm64 platforms as well.
Submitted by: Patryk Duda <pdk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Semihalf
Differential Revision: https://reviews.freebsd.org/D12258
Now the virtual address of received buffer is taken from a software ring.
Thanks to this, we can use the NETA driver on 64 bits architecture and
avoid 32-bit buf_cookie descriptor field limitation.
Submitted by: Patryk Duda <pdk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Semihalf
Differential Revision: https://reviews.freebsd.org/D12257
This patch adds support for UART in Armada 3700 family.
It exposes both low-level UART interface, as well as
standard driver methods.
Submitted by: Patryk Duda <pdk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Semihalf
Differential Revision: https://reviews.freebsd.org/D12250
Enabled driver can be used on boards equipped with Marvell Armada 3700 SoC.
Submitted by: Patryk Duda <pdk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Semihalf
Differential Revision: https://reviews.freebsd.org/D12256
This patch reuses ehci_mv driver by adding a support for the new
compatible string and adding ehci_mv.c to list of available options
for arm64 platforms.
Submitted by: Patryk Duda <pdk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Semihalf
Differential Revision: https://reviews.freebsd.org/D12255
illumos/illumos-gate@1702cce7511702cce751
FreeBSD note: rather than merging the zpool.8 update I copied the zpool
scrub section from the illumos zpool.1m to FreeBSD zpool.8 almost
verbatim. Now that the illumos page uses the mdoc format, it was an
easier option. Perhaps the change is not in perfect compliance with the
FreeBSD style, but I think that it is acceptible.
https://www.illumos.org/issues/8414
This issue tracks the port of scrub pause from ZoL: https://github.com/zfsonlinux/zfs/pull/6167
Currently, there is no way to pause a scrub. Pausing may be useful when
the pool is busy with other I/O to preserve bandwidth.
Description
This patch adds the ability to pause and resume scrubbing. This is achieved
by maintaining a persistent on-disk scrub state. While the state is 'paused'
we do not scrub any more blocks. We do however perform regular scan
housekeeping such as freeing async destroyed and deadlist blocks while paused.
Motivation and Context
Scrub pausing can be an I/O intensive operation and people have been asking
for the ability to pause a scrub for a while. This allows one to preserve scrub
progress while freeing up bandwidth for other I/O.
Reviewed by: George Melikov <mail@gmelikov.ru>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Alek Pinchuk <apinchuk@datto.com>
MFC after: 2 weeks
Enabled driver can be used on boards equipped with Marvell Armada
3700/7k/8k SoCs.
Submitted by: Patryk Duda <pdk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Semihalf
Differential Revision: https://reviews.freebsd.org/D12253
This driver will be used by Marvell Armada 3700 and 7k/8k SoC families.
The same, generic xhci device also appears in Armada 380, so we are reusing
driver.
This patch also adds xhci_mv.c entry to the arm64 files list.
Submitted by: Patryk Duda <pdk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Semihalf
Differential Revision: https://reviews.freebsd.org/D12252
Workaround problem that ifa_ifwithaddr() also matches the scope ID of
the IPv6 address when searching for a maching IPv6 address. For now
simply try all valid scope IDs until a match is found.
MFC after: 1 week
Sponsored by: Mellanox Technologies
use of the linux_poll_wakeup() function from unsafe contexts, which
can lead to use-after-free issues.
Instead of calling linux_poll_wakeup() directly use the wake_up()
family of functions in the LinuxKPI to do this.
Bump the FreeBSD version to force recompilation of external kernel modules.
MFC after: 1 week
Sponsored by: Mellanox Technologies
- Capture exit code in pipeline and test in output.
- Drop awk use in favor of `sleep 2`. This helps guarantee the EPIPE
behavior without the potential race.
- start_wrq_wr must not drain the wr_list if there are incomplete_wrs
pending. This can happen when a t4_wrq_tx runs between two
start_wrq_wr.
- commit_wrq_wr must examine the cookie's pidx and ndesc with the
queue's lock held. Otherwise there is a bad race when incomplete WRs
are being completed and commit_wrq_wr for the WR that is ahead in the
queue updates the next incomplete WR's cookie's pidx/ndesc but the
commit_wrq_wr for the second one is using stale values that it read
without the lock.
MFC after: 1 week
Sponsored by: Chelsio Communications
code. I think it is safe to say it's not going to be. I'm also working to
de-orbit catman, so remove the reference in the manpage.
Reviewed by: allanjude
P5040/P5021 have the same number of LAWs as P5020. There may be a better way of
getting the count from the FDT (fsl,num-laws property on soc/corenet-law or
soc/ecm-law), but that's not supported everywhere, so we still need this check
for those other cases.
These processors may not be supported yet, but add them for completion.
POWER9 is planned for support. e300 may work (based on 603e core).
P5040/P5021 are similar to P5020, so should work as well. One addition is
needed for P5040, to support the number of LAWs, and will be a separate commit.
