Commit Graph

96009 Commits

Author SHA1 Message Date
Nathan Whitehorn
02ef3f33de Real OF systems have an ihandle under /chosen/stdout, not a phandle. Use
the right type.
2013-12-01 19:05:32 +00:00
Nathan Whitehorn
fb5b9994b3 Open Firmware mandates that certain cross-references, in particular those
in /chosen, be ihandles. The ePAPR spec makes those cross-reference phandles,
since FDT has no concept of ihandles. Have the OF FDT CI module interpret
queries about ihandles as cross-reference phandles.
2013-12-01 19:03:20 +00:00
Nathan Whitehorn
9d2c48c0e3 Remove unnecessary double-setting of the thread's onfault state in
copyinstr().
2013-12-01 17:29:07 +00:00
Nathan Whitehorn
3df046183e The kernel stack guard pages are only below the stack pointer, not above.
Prevent erroneous detection of stack overflows on legitimate faults on the
page after this thread's stack.

MFC after:	3 days
2013-12-01 17:28:28 +00:00
Nathan Whitehorn
49aba28afe Make uart_cpu_powerpc work on both FDT and OFW systems. This is the last
remaining modification required to build kernels that work with both on
PowerPC.
2013-12-01 16:02:22 +00:00
Edward Tomasz Napierala
c4dfe4abe2 Fix hang on reboot with active iSCSI connections.
MFC after:	3 days
Sponsored by:	The FreeBSD Foundation
2013-12-01 08:13:10 +00:00
Kirk McKusick
2e436d88a3 We needlessly panic when trying to flush MKDIR_PARENT dependencies.
We had previously tried to flush all MKDIR_PARENT dependencies (and
all the NEWBLOCK pagedeps) by calling ffs_update(). However this will
only resolve these dependencies in direct blocks. So very large
directories with MKDIR_PARENT dependencies in indirect blocks had
not yet gotten flushed. As the directory is in the midst of doing a
complete sync, we simply defer the checking of the MKDIR_PARENT
dependencies until the indirect blocks have been sync'ed.

Reported by: Shawn Wallbridge of imaginaryforces.com
Tested by:   John-Mark Gurney <jmg@funkthat.com>
PR:          183424
MFC after:   2 weeks
2013-12-01 07:34:21 +00:00
Adrian Chadd
79750e3b36 Migrate the sendfile_sync structure into a public(ish) API in preparation
for extending and reusing it.

The sendfile_sync wrapper is mostly just a "mbuf transaction" wrapper,
used to indicate that the backing store for a group of mbufs has completed.
It's only being used by sendfile for now and it's only implementing a
sleep/wakeup rendezvous.  However, there are other potential signaling
paths (kqueue) and other potential uses (socket zero-copy write) where the
same mechanism would also be useful.

So, with that in mind:

* extract the sendfile_sync code out into sf_sync_*() methods
* teach the sf_sync_alloc method about the current config flag -
  it will eventually know about kqueue.
* move the sendfile_sync code out of do_sendfile() - the only thing
  it now knows about is the sfs pointer.  The guts of the sync
  rendezvous (setup, rendezvous/wait, free) is now done in the
  syscall wrapper.
* .. and teach the 32-bit compat sendfile call the same.

This should be a no-op.  It's primarily preparation work for teaching
the sendfile_sync about kqueue notification.

Tested:

* Peter Holm's sendfile stress / regression scripts

Sponsored by:	Netflix, Inc.
2013-12-01 03:53:21 +00:00
Eitan Adler
4be4358fd1 r258780 should not have applied to .S files.
Reported by:	jmallett
2013-12-01 02:58:48 +00:00
Eitan Adler
7a22215c53 Fix undefined behavior: (1 << 31) is not defined as 1 is an int and this
shifts into the sign bit.  Instead use (1U << 31) which gets the
expected result.

This fix is not ideal as it assumes a 32 bit int, but does fix the issue
for most cases.

A similar change was made in OpenBSD.

Discussed with:	-arch, rdivacky
Reviewed by:	cperciva
2013-11-30 22:17:27 +00:00
Eitan Adler
c8aef31d30 Similar to the (1 << 31) case it is not defined to do (2 << 30). 2013-11-30 22:16:37 +00:00
Andreas Tobler
86b2b302f9 Add a printf to inform about the logical memory block size which is in use
by the system. This might give a hint why a pSeries system is not booting.
2013-11-30 21:54:55 +00:00
Pawel Jakub Dawidek
f2b525e6b9 Make process descriptors standard part of the kernel. rwhod(8) already
requires process descriptors to work and having PROCDESC in GENERIC
seems not enough, especially that we hope to have more and more consumers
in the base.

MFC after:	3 days
2013-11-30 15:08:35 +00:00
Michael Tuexen
c302aeb123 In
http://svnweb.freebsd.org/changeset/base/258221
I introduced a bug which initialized global locks
whenever the SCTP stack initialized. This was fixed in
http://svnweb.freebsd.org/changeset/base/258574
by rodrigc@. He just initialized the locks for
the default vnet. This fix reverts to the old
behaviour before r258221, which explicitly makes
sure it is only called once, because this works also on
other platforms.
MFC after: 3 days
X-MFC with: r258574.
2013-11-30 12:51:19 +00:00
Adrian Chadd
011a151b50 Disable this debugging - it's far too verbose when doing TX rate debugging. 2013-11-29 22:36:00 +00:00
Adrian Chadd
2f1b79906d Use the correct endian-ness accessor for this TLV field.
(It's coming from firmware and thus it's defined as little-endian.)
2013-11-29 22:35:24 +00:00
Adrian Chadd
1db2772f43 Make sure any waiters on the scan results get notified if the scan task
decides to do nothing.

If this isn't done, then a scan request whilst a scan occurs in an active
channel set or a completed channel set will hang.

Tested:

* Intel 5100, STA mode
2013-11-29 22:24:57 +00:00
Nathan Whitehorn
e30a29aa7c Use the Open Firmware-based CPU frequency determination as a generic
fallback if we can't measure CPU frequency. This is also useful on a
variety of embedded systems using FDT.
2013-11-29 21:59:03 +00:00
Andreas Tobler
ac181a2130 Fix typo. 2013-11-29 20:19:00 +00:00
Eitan Adler
04660ed15f Fix typo
Reported by:	emaste
2013-11-29 20:14:26 +00:00
Eitan Adler
5c41c9d246 Fix typo
Reported by:	swildner@DragonFlyBSD.org
2013-11-29 20:12:02 +00:00
Andriy Gapon
f77ffe1b22 zfs: add zfs_freebsd_putpages
this should be more optimal than writing pages one-by-one via zfs_write ->
update_pages in the case of multi-page putpages call

MFC after:	16 days
2013-11-29 15:39:39 +00:00
Andriy Gapon
6c5b7fffce zfs: add dmu_write_pages variant for freebsd
The freebsd variant of dmu_write_pages is hidden under _KERNEL
to avoid needlessly pulling in vm_page_t declaration.
Besides, this function seems to be useless for ZFS userland counterpart.

MFC after:	15 days
2013-11-29 15:34:43 +00:00
Andriy Gapon
fdbcc95a47 zfs: make zfs_map_page / zfs_unmap_page public
MFC after:	15 days
2013-11-29 15:33:40 +00:00
Andriy Gapon
998a42756c drop ZUT_OBJ, zfs unit testing driver never materialzied in freebsd
MFC after:	5 days
2013-11-29 15:32:53 +00:00
Ian Lepore
4808bd047e Set the PGA_WRITEABLE flag when the protections indicate write access, not
just when the current access is a write.

Reviewed by:	zbb@
2013-11-29 15:06:11 +00:00
Ian Lepore
ff00fd81aa Look up a nand chip by id in the static table before trying to obtain
ONFI parameters.  This allows a static table entry to provide valid data
for chips known to provide invalid ONFI data.
2013-11-29 14:23:22 +00:00
Andriy Gapon
ac79eedf85 zfs mappedread_sf: assert that a page is never partially valid
ZFS never partially validates or invalidates a page.
The higher level VM should not do that either.
mappedread_sf correct operation depends on a page being either fully
valid or invalid.

MFC after:	7 days
2013-11-29 12:19:52 +00:00
Craig Rodrigues
a3845534a0 In keg_dtor(), print out the keg name in the "Freed UMA keg was not empty"
message printed to the console.  This makes it easier to track down
the source of certain memory leaks.

Suggested by: adrian
2013-11-29 08:04:45 +00:00
Rui Paulo
1a707877c1 Fix typo in comment. 2013-11-29 07:55:44 +00:00
Rui Paulo
30ff7b3820 Move KDTRACE_FRAME to "options" since it's used by kern.pre.mk. 2013-11-29 07:28:59 +00:00
Kevin Lo
5b7514646c Change run_rt2870_rf_write() prototype (no functional change) 2013-11-29 07:08:17 +00:00
Kevin Lo
5f7e329cec On the RT2870, rf registers are now 64-bit, not 32-bit after r257955.
Committed over a Buffalo WLI-UC-AG300N (RT2870).
2013-11-29 06:10:44 +00:00
Rui Paulo
19107ce5e7 Add an interface for the Wii IOS kernels.
Multiple IOS interfaces can exist at the same time.
2013-11-29 00:40:32 +00:00
Andreas Tobler
a07c08cea5 Give some output about the CPU clock on IBMPOWER machines, currently read
from OF. Linux does it similar, means they also read the OF values and
display them.

Tested under qemu and real hardware:

	cpu0: IBM POWER5+ revision 2.0, 1898.10 MHz
2013-11-28 21:57:17 +00:00
Andriy Gapon
be3d0087dc MFV r258665: 4347 ZPL can use dmu_tx_assign(TXG_WAIT)
illumos/illumos-gate@e722410c49

MFC after:	9 days
X-MFC after:	r258632
2013-11-28 19:44:36 +00:00
Ed Maste
ed4c8729a2 Purely cosmetic change: order DT_REL* and DT_RELA* consistently.
From projects/uefi, r246107

Sponsored by:	The FreeBSD Foundation
2013-11-28 19:41:03 +00:00
Peter Wemm
b5019bc45b jail_v0.ip_number was always in host byte order. This was handled
in one of the many layers of indirection and shims through stable/7
in jail_handle_ips().  When it was cleaned up and unified through
kern_jail() for 8.x, the byte order swap was lost.

This only matters for ancient binaries that call jail(2) themselves
internally.
2013-11-28 19:40:33 +00:00
Andriy Gapon
456a87bb3b MFV r258371,r258372: 4101 metaslab_debug should allow for fine-grained control
4101 metaslab_debug should allow for fine-grained control
4102 space_maps should store more information about themselves
4103 space map object blocksize should be increased
4104 ::spa_space no longer works
4105 removing a mirrored log device results in a leaked object
4106 asynchronously load metaslab

illumos/illumos-gate@0713e232b7

Note that some tunables have been removed and some new tunables have
been added.  Of particular note, FreeBSD-only knob
vfs.zfs.space_map_last_hope is removed as it was a nop for some time now
(after one of the previous merges from upstream).

MFC after:	11 days
Sponsored by:	HybridCluster [merge]
2013-11-28 19:37:22 +00:00
Alexander Motin
03175483c2 - Add bucket size column to show uma DDB command.
- Add `show umacache` command to show alike stats for cache-only UMA zones.
2013-11-28 19:20:49 +00:00
Andriy Gapon
02727275c5 opensolaris compat: add taskq_wait emulation
MFC after:	10 days
2013-11-28 19:17:11 +00:00
Andriy Gapon
73f82099ea add taskqueue_drain_all
This API has semantics similar to that of taskqueue_drain but acts on
all tasks that might be queued or running on a taskqueue.
A caller must ensure that no new tasks are being enqueued otherwise this
call would be totally meaningless.  For example, if the tasks are
enqueued by an interrupt filter then its interrupt must be disabled.

MFC after:	10 days
2013-11-28 18:56:34 +00:00
Alexander V. Chernikov
a19b3f74af Simplify O_NAT opcode handling.
MFC after:	2 weeks
Sponsored by:	Yandex LLC
2013-11-28 15:28:51 +00:00
Alexander V. Chernikov
1058f17749 Check ipfw table numbers in both user and kernel space before rule addition.
Found by:	Saychik Pavel <umka@localka.net>
MFC after:	2 weeks
Sponsored by:	Yandex LLC
2013-11-28 10:28:28 +00:00
Andriy Gapon
7bc07f0575 fix a serious bug in r258632: offset parameter must be set in zio
In illumos all ioctl zio-s are "global" at the moment.  That is they act
on a whole disk, e.g. a cache flush command, and thus do not need either
offset or size parameters.
FreeBSD, on the other hand, has support for TRIM command and that
command requires proper offset and size parameters.
Without this fix all TRIM commands act on the start of any disk or
partition used by ZFS destroying any data there.

Pointyhat to:	avg
Tested by:	sbruno
MFC after:	3 days
X-MFC with:	r258632
Sponsored by:	HybridCluster
2013-11-28 08:48:49 +00:00
Neel Natu
b5b28fc9dc Add support for level triggered interrupt pins on the vioapic. Prior to this
commit level triggered interrupts would work as long as the pin was not shared
among multiple interrupt sources.

The vlapic now keeps track of level triggered interrupts in the trigger mode
register and will forward the EOI for a level triggered interrupt to the
vioapic. The vioapic in turn uses the EOI to sample the level on the pin and
re-inject the vector if the pin is still asserted.

The vhpet is the first consumer of level triggered interrupts and advertises
that it can generate interrupts on pins 20 through 23 of the vioapic.

Discussed with:	grehan@
2013-11-27 22:18:08 +00:00
Nathan Whitehorn
9b00150b2c This driver doesn't need the /options node, so don't check for it. 2013-11-27 22:02:55 +00:00
Nathan Whitehorn
a0d0d6d88b badaddr() is used only in the grackle PCI driver, so move its definition
there. Clean up a spurious setfault() declaration as well.
2013-11-27 22:01:09 +00:00
Nathan Whitehorn
1679c30254 Make RTAS calls, which call setfault() to recover from machine checks,
preserve any existing fault buffer. RTAS calls are meant to be safe from
interrupt context (and are indeed used there to implement the xics PIC
drvier). Without this, calling into RTAS in interrupt context would have
the effect of clearing any existing onfault state of the interrupted
thread, potentially leading to a panic.
2013-11-27 21:51:34 +00:00
Alexander Motin
cec48e002a Make UMA to not blindly force offpage slab header allocation for large
(> PAGE_SIZE) zones.  If zone is not multiple to PAGE_SIZE, there may
be enough space for the header at the last page, so we may avoid extra
header memory allocation and hash table update/lookup.

ZFS creates bunch of odd-sized UMA zones (5120, 6144, 7168, 10240, 14336).
This change gives good use to at least some of otherwise lost memory there.

Reviewed by:	avg
2013-11-27 20:56:10 +00:00