most often used with network interfaces.
The SFF-8472 standard defines the information that can be retrieved
from an optic or a copper cable plugged into a NIC, most often
referred to as SFP+. Examples of values that can be read
include the cable vendor's name, part number, date of manufacture
as well as running data such as temperature, voltage and tx
and rx power.
Copious comments on how to use these values with an I2C interface
are given in the header file itself.
MFC after: 2 weeks
There are good reasons for this to happen, such as recursion prevention, etc.
and they are not fatal since buckets are just an optimization mechanism.
Real bucket allocation failures are any way counted by the bucket zones
themselves, and we don't need double accounting there.
was used without making sure first that it was really passed for us.
On some of my systems this bug made user argument passed by ZFS code to
uma_zalloc_arg() unexpectedly block UMA per-CPU caches for those zones.
sys/boot/fdt/dts/bindings-gpio.txt. Make the led pin an output, add the
missing flag field. No functional change (gpioled(4) isn’t supported on
FDT systems yet).
Approved by: adrian (mentor)
given process.
Note that the correctness of the trampoline length returned for ABIs
which do not use shared page depends on the correctness of the struct
sysvec sv_szsigcodebase member, which will be fixed on as-need basis.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
compilation results in inclusion of the header, a confict arises due
to savefpu being union for i386, but used as struct in the pcb
definition. The 32bit code should not need amd64 variant of the
struct pcb anyway.
For struct region_descriptor, use __uint64_t instead of unsigned long,
as the base type for bit-fields. Unsigned long cannot have width 64
for -m32.
The changes allowed to use sys/sysctl.h for cc -m32.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
4080 zpool clear fails to clear pool
4081 need zfs_mg_noalloc_threshold
illumos/illumos-gate@22e30981d8
MFC after: 10 days
Sponsored by: HybridCluster [merge]
illumos/illumos-gate@69962b5647
Please note the following changes:
- zio_ioctl has lost its priority parameter and now TRIM is executed
with 'now' priority
- some knobs are gone and some new knobs are added; not all of them are
exposed as tunables / sysctls yet
MFC after: 10 days
Sponsored by: HybridCluster [merge]
943 zio_interrupt ends up calling taskq_dispatch with TQ_SLEEP
illumos/illumos-gate@5aeb94743e
Essentially FreeBSD taskqueues already operate in a mode that
was added to Illumos with taskq_dispatch_ent change.
We even exposed the superior FreeBSD interface as taskq_dispatch_safe.
Now we just rename taskq_dispatch_safe to taskq_dispatch_ent and
struct struct ostask to taskq_ent_t, so that code differences will be
minimal.
After this change sys/cddl/compat/opensolaris/sys/taskq.h header is no
longer needed.
Note that this commit is not an MFV because the upstream change was not
individually committed to the vendor area.
MFC after: 8 days
The new macros are implemented in terms of SDT_PROBE_DEFINE and SDT_PROBE.
Probes defined in this way will appear under SDT provider named "sdt".
Parameter types are exposed via SDT_PROBE_ARGTYPE.
This is something that illumos does not have by default.
This kind of SDT probes is already present in ZFS code, so those probes
will now be available if KDTRACE_HOOKS options is enabled.
A potential future illumos compatibility enhancement is to encode a provider
name as a prefix in a probe name.
Reviewed by: markj
MFC after: 3 weeks
X-MFC after: r258622
In its stead use the Solaris / illumos approach of emulating '-' (dash)
in probe names with '__' (two consecutive underscores).
Reviewed by: markj
MFC after: 3 weeks
callable from the kernel.
Right now vn_sendfile() can't be called from anything other than
a syscall handler _and_ return the number of bytes queued.
This simply moves the copyout() to do_sendfile() so that any kernel
code can initiate vn_sendfile() outside of a syscall context.
Tested:
* tiny little sendfile program spitting things out a tcp socket
Sponsored by: Netflix, Inc.
This lock gets deleted in sys/netpfil/ipfw/ip_fw2.c:vnet_ipfw_uninit().
Therefore, vnet_ipfw_nat_uninit() *must* be called before vnet_ipfw_uninit(),
but this doesn't always happen, because the VNET_SYSINIT order is the same for both functions.
In sys/net/netpfil/ipfw/ip_fw2.c and sys/net/netpfil/ipfw/ip_fw_nat.c,
IPFW_SI_SUB_FIREWALL == IPFW_NAT_SI_SUB_FIREWALL == SI_SUB_PROTO_IFATTACHDOMAIN
and
IPFW_MODULE_ORDER == IPFW_NAT_MODULE_ORDER
Consequently, if VIMAGE is enabled, and jails are created and destroyed,
the system sometimes crashes, because we are trying to use a deleted lock.
To reproduce the problem:
(1) Take a GENERIC kernel config, and add options for: VIMAGE, WITNESS,
INVARIANTS.
(2) Run this command in a loop:
jail -l -u root -c path=/ name=foo persist vnet && jexec foo ifconfig lo0 127.0.0.1/8 && jail -r foo
(see http://lists.freebsd.org/pipermail/freebsd-current/2010-November/021280.html )
Fix the problem by increasing the value of IPFW_NAT_SI_SUB_FIREWALL,
so that vnet_ipfw_nat_uninit() runs after vnet_ipfw_uninit().
3-clause BSD license as specified by Oracle America, Inc. in 2010.
This license change was approved by Wim Coekaerts, Senior Vice
President, Linux and Virtualization at Oracle Corporation.
bhyve supports a single timer block with 8 timers. The timers are all 32-bit
and capable of being operated in periodic mode. All timers support interrupt
delivery using MSI. Timers 0 and 1 also support legacy interrupt routing.
At the moment the timers are not connected to any ioapic pins but that will
be addressed in a subsequent commit.
This change is based on a patch from Tycho Nightingale (tycho.nightingale@pluribusnetworks.com).
In r208160, sctp_it_ctl was made a global variable, across all VNETs.
However, sctp_init() is called for every VNET that is created. This results
in the same global mutexes which are part of sctp_it_ctl being initialized. This can result
in crashes if many jails are created.
To reproduce the problem:
(1) Take a GENERIC kernel config, and add options for: VIMAGE, WITNESS,
INVARIANTS.
(2) Run this command in a loop:
jail -l -u root -c path=/ name=foo persist vnet && jexec foo ifconfig lo0 127.0.0.1/8 && jail -r foo
(see http://lists.freebsd.org/pipermail/freebsd-current/2010-November/021280.html )
Witness will warn about the same mutex being initialized.
Fix the problem by only initializing these mutexes in the default VNET.
The code was easier to read without __DECONST and clang didn't report
any error. I thought the cast was enough...
MFC after: 3 days
X-MFC-With: r258549
drm_le_cmp() (qsort_r()'s callback) receives pointers to elements in the
array passed to qsort_r(), not the elements themselves.
Before this fix, the use of qsort_r() shuffled the array, not sorted it,
because the compare callback accessed random memory locations, not the
expected elements.
This bug triggered an infinite loop in KDE/xserver:
1. KDE has a kded module called "randrmonitor" which queries xserver
for current monitors at startup and then listens to RandR
notifications from xserver.
2. xserver handles the query from "randrmonitor" by polling the
video device using the "drm_mode_getconnector()" ioctl. This
ioctl returns a list of connectors and, for those with a
connected monitor, the available modes. Each modes list is sorted
by the kernel before returning. When xserver gets the connectors
list, it sorts the modes lists again.
In the case of this bug, when two modes are equal (in xserver's
compare function PoV), their order is kept stable (ie. the
kernel order is kept for those two modes). And because the list
was shuffled by the kernel, the order of two equal modes was
frequently changed in the final modes list in xserver.
3. xserver compares the returned connectors list with the list
obtained earlier. In particular, it compares the sorted
modes lists for each connector. If a property of a connector
changes (eg. modes), xserver sends a "RRNotify_OutputChange"
notification.
Because of the change of order between equal modes, xserver sent
a notification after each polling of the connectors.
4. "randrmonitor" receives a notification, triggered by its query. The
notification doesn't contain the new connectors list, therefore, it
asks for the new list using the same function: go back to step #2.
MFC after: 3 days
option, unbreak the lock tracing release semantic by embedding
calls to LOCKSTAT_PROFILE_RELEASE_LOCK() direclty in the inlined
version of the releasing functions for mutex, rwlock and sxlock.
Failing to do so skips the lockstat_probe_func invokation for
unlocking.
- As part of the LOCKSTAT support is inlined in mutex operation, for
kernel compiled without lock debugging options, potentially every
consumer must be compiled including opt_kdtrace.h.
Fix this by moving KDTRACE_HOOKS into opt_global.h and remove the
dependency by opt_kdtrace.h for all files, as now only KDTRACE_FRAMES
is linked there and it is only used as a compile-time stub [0].
[0] immediately shows some new bug as DTRACE-derived support for debug
in sfxge is broken and it was never really tested. As it was not
including correctly opt_kdtrace.h before it was never enabled so it
was kept broken for a while. Fix this by using a protection stub,
leaving sfxge driver authors the responsibility for fixing it
appropriately [1].
Sponsored by: EMC / Isilon storage division
Discussed with: rstone
[0] Reported by: rstone
[1] Discussed with: philip
It turned out that on pSeries machines the call into OF modified the trap
vectors and this made further behaviour unpredictable.
With this commit I'm now able to boot multi user on a network booted
environment on my IntelliStation 285. This is a POWER5+ machine.
Discussed with: nwhitehorn
MFC after: 1 week
to inject edge triggered legacy interrupts into the guest.
Start using the new API in device models that use edge triggered interrupts:
viz. the 8254 timer and the LPC/uart device emulation.
Submitted by: Tycho Nightingale (tycho.nightingale@pluribusnetworks.com)
where "m" is number of source nodes and "n" is number of states. Thus,
on heavy loaded router its processing consumed a lot of CPU time.
Reimplement it with O(m+n) complexity. We first scan through source
nodes and disconnect matching ones, putting them on the freelist and
marking with a cookie value in their expire field. Then we scan through
the states, detecting references to source nodes with a cookie, and
disconnect them as well. Then the freelist is passed to pf_free_src_nodes().
In collaboration with: Kajetan Staszkiewicz <kajetan.staszkiewicz innogames.de>
PR: kern/176763
Sponsored by: InnoGames GmbH
Sponsored by: Nginx, Inc.
- Removed pf_remove_src_node().
- Introduce pf_unlink_src_node() and pf_unlink_src_node_locked().
These function do not proceed with freeing of a node, just disconnect
it from storage.
- New function pf_free_src_nodes() works on a list of previously
disconnected nodes and frees them.
- Utilize new API in pf_purge_expired_src_nodes().
In collaboration with: Kajetan Staszkiewicz <kajetan.staszkiewicz innogames.de>
Sponsored by: InnoGames GmbH
Sponsored by: Nginx, Inc.
This is a port from amd64 of r258436, and is intended to make diffs
(against amd64 and for future UEFI work) easier to review.
Reviewed by: jhb@
Sponsored by: The FreeBSD Foundation
so they can be used in the userspace version of ipfw/dummynet
(normally using netmap for the I/O path).
This is the first of a few commits to ease compiling the
ipfw kernel code in userspace.
The purpose of the PMBR is to have the disk appear in use to GPT
unaware utilities (like fdisk). However, if the PMBR has been changed
by a GPT unaware utlity then we must assume that this was deliberate
(as it involved removal of the special slice) and we should not treat
the unmodified GPT-specific sectors as being valid. By lowering the
probe priority in that case, the MBR scheme will take precedence and
the kernel will end up using the MBR and not the GPT. We will still
use the GPT if the kernel does not support the MBR scheme.
Extracted from the projects/uefi branch, this change is a reasonable
cleanup and will reduce the diffs to review when bringing in the
UEFI work.
Reviewed by: kib@
Sponsored by: The FreeBSD Foundation
The page presence memory test takes a long time on large memory systems
and has little value on contemporary amd64 hardware.
Sponsored by: The FreeBSD Foundation
ibm,dma-window properties. This is especially a concern when
#ibm,dma-address-cells is not specified and we have to use the regular
#address-cells property.
MFC after: 1 week
context switch just to call the done callback... On my machine, this
improves geli/gzero decrypt performance by ~27% from 550MB/sec to
~700MB/sec...
MFC after: 3 days
compiler interprets this as an undefined behaviour. Instead, ensure
that the sum of uio_offset and uio_resid is below OFF_MAX using the
operation which cannot overflow.
Reported and tested by: pho
Discussed with: bde
Approved by: des (pseudofs maintainer)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
enables data cache and other chip-specific features. It was previously
done via an early SYSINIT, but it was being done after pmap and vm setup,
and those setups need to use mutexes. On some modern ARM platforms,
the ldrex/strex instructions that implement mutexes require the data cache
to be enabled.
A nice side effect of enabling caching earlier is that it eliminates the
multi-second pause that used to happen early in boot while physical memory
and pmap and vm were being set up. On boards with 1 GB or more of ram
this pause was very noticible, sometimes 5-6 seconds.
PR: arm/183740
big chunk of kernel memory. Validate size of data. Add error handling to
avoid calling copyout() when data has not been read correctly.
Reviewed by: zbb
Reported by: x90c <geinblues@gmail.com>
MFC after: 2 days
larger than the operational region. If the op region size is zero,
clipping would create a zero-sized map entry. The result is that vm
map splay starts behaving inconsistently, sometimes returning
zero-sized entry, sometimes the next (or previous) entry.
One step further, it could result in e.g. vm_map_wire() setting
MAP_ENTRY_IN_TRANSITION on the zero-sized entry, but failing to clear
it in the done part. The vm_map_delete() than hangs forever waiting
for the flag removal.
Verify for zero-length requests and act as if it is always successfull
without performing any action on the address space.
Diagnosed by: pho
Tested by: pho (previous version)
Reviewed by: alc (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
is chunked to pieces limited by integer io_hold_cnt tunable, while
vm_fault_quick_hold_pages() takes integer max_count as the upper bound.
Rearrange the checks to correctly handle overflowing address arithmetic.
Submitted by: bde
Tested by: pho
Discussed with: alc
MFC after: 1 week
When entering a mapping via pmap_enter() unmanaged pages ought to be
naturally excluded from the "modified" and "referenced" emulation.
RW permission should be granted implicitly when requested,
otherwise unmanaged page will not recover from the permission fault
since there will be no PV entry to indicate that the page can be written.
In addition, only managed pages that participate in "modified"
emulation need to be marked as "dirty" and "writeable" when entered
with RW permissions. Likewise with "referenced" flag for managed pages.
Unmanaged ones however should not be marked as such.
Reviewed by: cognet, gber
When emulating modified bit the executable attribute was cleared by
mistake when calling pmap_set_prot(). This was not a problem before
changes to ref/mod emulation since all the pages were created RW basing
on the "prot" argument in pmap_enter(). Now however not all pages are RW
and the RW permission can be cleared in the process.
Added proper KTRs accordingly.
Spotted by: cognet
Reviewed by: gber
Now it is easy to expand the size of the mirror when all its components
are replaced. Also add g_resize method to geom_mirror class. It will write
updated metadata to new last sector, when parent provider is resized.
Silence from: geom@
MFC after: 1 month
