Commit Graph

48941 Commits

Author SHA1 Message Date
KATO Takenori
031491c0a6 Merged from sys/i386/isa/npx.c revision 1.81. 2000-06-06 08:12:17 +00:00
David Nugent
6a1eaeca35 Fix db syncronization when username is changed with -l under usermod.
pw(8) was calling pwd_mkdb -u oldusername instead of newusername, so
the update appears to have failed until the next full pwd_mkdb
syncronization.

PR:		bin/16418
2000-06-06 07:33:00 +00:00
Andrey A. Chernov
82dd3eab13 Don't replace TABs with spaces for COLORLS because "some terminals get confused"
as comment says. I know no terminal confused by this. If even such terminal
exists, it must be termcap flag for this, not hardcoded in ls.
2000-06-06 07:32:20 +00:00
Andrey A. Chernov
a04eaf5b2e Add -G to usage: if COLORLS 2000-06-06 07:29:43 +00:00
Andrey A. Chernov
1bf1478a9f Staticize more functions 2000-06-06 07:19:50 +00:00
Andrey A. Chernov
fd4e4d608f Move colorquit() prototype to extern.h
Add "extern" to variables declarations in extern.h to not make them
commons into each compiled file.
2000-06-06 07:14:01 +00:00
Andrey A. Chernov
38782c258d Make signal handler safe - don't use stdio (pointed by bde)
Staticize some color functions
Add yet one tolower() call which is forgotten after check
Don't check for OOPS - not really needed
2000-06-06 06:52:03 +00:00
Brian Feldman
2803b77e52 Allow "DenyUsers" to function. 2000-06-06 06:16:55 +00:00
Andrey A. Chernov
c661df54c3 Wording: reset to normal ANSI value -> reset to the normal color 2000-06-06 06:14:37 +00:00
Bill Paul
4d1f3470e3 - Call mii_pollstat() after we bring up the link on a 1000baseTX card
after autoneg so we make sure to set the link state and duplex mode
  correctly.
- Make sure to set the 'ignore pause frames' bit on the XMAC.
- Small linewrap fix.
2000-06-06 02:56:37 +00:00
Andrey A. Chernov
4304e142c2 Reflect reality:
yellow -> brown
white -> light grey
2000-06-06 00:42:24 +00:00
Chris Costello
f574046378 Instead of completely disallowing VOP_SETATTR, just do it where there is
an underlying vnode.

Suggested by:	bde
2000-06-06 00:35:39 +00:00
Andrey A. Chernov
d2cb162e9c ANSI attribute -> video attribute, was confused by wrong syscons comment 2000-06-06 00:19:51 +00:00
Andrey A. Chernov
4d9a01eba4 Cosmetique: fix comments - don't use 'ansi' word for non-ansi (adapter) colors 2000-06-06 00:13:40 +00:00
Robert Watson
0c167ea96c o Minor spelling/grammar nits in intro header about conference
- s/netoworking/Networking/
    - s/are/is/
2000-06-06 00:08:26 +00:00
Andrey A. Chernov
9d95519b5b initial -> normal (since this term used in syscons too)
Explicitly mark ANSI colors from non-ANSI
2000-06-06 00:03:38 +00:00
Andrey A. Chernov
30c768bd37 Properly mark all sequences which set initial colors.
Clean color tables.
2000-06-05 23:50:00 +00:00
Andrey A. Chernov
96a7b7f843 Specify parameters ranges for E[...x 2000-06-05 23:24:37 +00:00
David E. O'Brien
7a0e3a90cb Consistently protect f28 with noat/at pairs.
This may be be necessary.  But we are taking the conservative approach at
the moment.

Reviewed by:	mjacob, gallatin
2000-06-05 23:05:22 +00:00
Andrey A. Chernov
f396b96167 Document E[39m and E[49m
Describe whole E[...x set
2000-06-05 23:01:58 +00:00
Andrey A. Chernov
5da0ba24b7 cons25*: fix "op" to set initial (and not default) color pair.
NOTE: you need to recompile old kernel first, "op" will not work otherwise
2000-06-05 22:21:31 +00:00
Andrey A. Chernov
f9641ac41e Implement ANSI E[39m and E[49m to set fg and bg to initial (not to default!)
values. E[x is bad because set them to default values and should be used only
in reset sequence.
2000-06-05 22:16:11 +00:00
Andrey A. Chernov
c85e2c8e57 Get rid of curses completely - use tgoto instead of tparm 2000-06-05 20:54:46 +00:00
Martin Cracauer
ab08444f95 Do SIGINT cleanup for SIGQUIT as well. 2000-06-05 20:38:47 +00:00
Andrey A. Chernov
faebfe2e07 Kill yourself in ^C handler, not exit(1) to allow script to sense signal 2000-06-05 20:08:50 +00:00
Andrey A. Chernov
47bb6b11f3 Cosmetique of prev. optimization - don't use global variable 2000-06-05 19:56:52 +00:00
Andrey A. Chernov
cf0feaeee9 Don't use curses includes, include termcap.h instead
Don't use curses functions, use tputs instead
Add ^C reaction - reset colors
Optimization - don't turn off colors after EACH file printed.
Fix wrong ctype macro arg type in LSCOLORS parsing
2000-06-05 19:39:39 +00:00
Bill Paul
b6a1416d3a Don't bother checking the link state in dcphy_status() if the interface
isn't up.
2000-06-05 19:37:15 +00:00
Andrey A. Chernov
bd82d8ab8f Don't use curses includes, include termcap.h instead
Add ^C reaction set
2000-06-05 19:36:06 +00:00
Andrey A. Chernov
ecb7192ace Don't use ncurses, use termcap
Add DPADD
2000-06-05 19:34:31 +00:00
Robert Watson
579f4eb4cd o bde suggested moving the SYSCTL from kern_mib to the more appropriate
kern_prot, which cleans up some namespace issues
o Don't need a special handler to limit un-setting, as suser is used to
  protect suser_permitted, making it one-way by definition.

Suggested by:	bde
2000-06-05 18:30:55 +00:00
Wilko Bulte
4c859e8ae9 Correct info on AS2[01]00
Submitted by: Andrew Gallatin
2000-06-05 17:48:40 +00:00
Ruslan Ermilov
c5f8035bad /usr/mdec has gone 1.5 years ago. 2000-06-05 16:14:51 +00:00
Robert Watson
69a451890e o Mention kern.suser_permitted
Obtained from:	TrustedBSD Project
2000-06-05 14:56:01 +00:00
Robert Watson
0309554711 o Introduce kern.suser_permitted, a sysctl that disables the suser_xxx()
returning anything but EPERM.
o suser is enabled by default; once disabled, cannot be reenabled
o To be used in alternative security models where uid0 does not connote
  additional privileges
o Should be noted that uid0 still has some additional powers as it
  owns many important files and executables, so suffers from the same
  fundamental security flaws as securelevels.  This is fixed with
  MAC integrity protection code (in progress)
o Not safe for consumption unless you are *really* sure you don't want
  things like shutdown to work, et al :-)

Obtained from:	TrustedBSD Project
2000-06-05 14:53:55 +00:00
Robert Watson
192851dbff o Remove unneeded off_t variable to clean up compile warning
Obtained from:	TrustedBSD Project
2000-06-05 14:22:51 +00:00
Yoshihiro Takahashi
88916759e4 Re-support "wd" if PC98 is defined. Because PC-98 still uses the wd driver. 2000-06-05 13:33:39 +00:00
Yoshihiro Takahashi
ff1c1afb9f Sync with sbin/i386/fdisk/fdisk.c revision 1.37.
(Don't try to open the /dev/rXXX device.)
2000-06-05 13:28:49 +00:00
Yoshihiro Takahashi
a40915d750 - Remove obsolete PC-card boot.flp hack. It was for making both PC-card
boot.flp and plain boot.flp.
- Clean up crunchgen related routine.

- Add PC-98 support.
  TODO:
    o Documentation
    o Fix some messages for PC-98
    o Decrease the size of fixit.flp to 1.2MB
    o I18N (See: http://www.jp.FreeBSD.org/BootAsia/index.html)

No response from jkh
2000-06-05 13:17:23 +00:00
Brian Somers
3142868451 Specify a trigger address of 0.0.0.0 here so that we can sucessfully
negotiate with broken ppp implementations that won't supply an IP
number unless we suggest 0.0.0.0

Noted by:	Andrew Parry <andrew.parry@db.com>
2000-06-05 10:59:43 +00:00
Jeffrey Hsu
b10c4e187f Add missing increment of allocation counter. 2000-06-05 06:34:41 +00:00
Josef Karthauser
5a890e22bf Don't look up the ANSI sequences each time a colour is changed,
this is extremely inefficient, instead write them all down at the
beginning.

The correct sequence to switch colours off is to first use 'op' if
it exists, otherwise use 'oc'.  If neither of these exist then we
shouldn't be doing colour with this terminal.

Reviewed by:	ache
2000-06-05 03:51:29 +00:00
Greg Lehey
f68de48880 parity ops: Correctly recognize the end of the plex. Previously we
were running off the end and generating worrying but harmless messages
about parity errors that wouldn't go away.
2000-06-05 03:01:07 +00:00
Josef Karthauser
3ad254b3de Disable colour support in ls when building the fixit floppy, and make
a note of it in the release Makefile.
2000-06-05 02:25:55 +00:00
Josef Karthauser
74985094ef * Re-implement colour support using termcap's AF and AB capabilities
to manage the ANSI colour sequences.  Colour support is disabled
  unless the TERM environment variable references a valid termcap.

* Allow optional compilation of the colour support in the Makefile,
  defaulting to yes.  This allows us to switch it off for fixit
  floppies and other mediums where space is an issue and the extra
  bloat of statically linking with ncurses isn't acceptable.

* Display a warning if colour is requested with '-G' but support
  for it isn't compiled in.
2000-06-05 02:14:01 +00:00
Andrey A. Chernov
8db63bde5b Remove libxpg4 2000-06-04 23:16:14 +00:00
Robert Watson
9bcdb11de0 o Introduce libposix1e capability support routines, which provide a
standardized interface to the capability support in TrustedBSD.
o Not currently enabled in Makefile, as this code depends on syscalls
  and include files that will be committed at a later date.

Obtained from:	TrustedBSD Project
2000-06-04 22:17:11 +00:00
Robert Watson
4f15cc7406 o Fix incorrect descriptions of cap_get_flag() and cap_set_flag() in
capabilities summary manpage, cap(3).

Obtained from:	TrustedBSD Project
2000-06-04 22:14:10 +00:00
Robert Watson
ef9bbc7e4d o Build and install POSIX.1e capabilities man pages
o Add shared library version 2 to libposix1e given API changes, et al
o Commented out cap_*.c as that is not currently being compiled into
  the library (pending syscalls being committed)

Obtained from:	TrustedBSD Project
2000-06-04 21:25:31 +00:00
Robert Watson
db0e6ab267 o Add posix1e(3) references to acl.3 and cap.3
Obtained from:	TrustedBSD Project
2000-06-04 21:23:20 +00:00