in the man page and its header counterpart.
Submitted by: Christoph Mallon <christoph.mallon@gmx.de> (initial version)
Reviewed and further improved by: bde (previous version)
All bugs are: mine
picked the link that was installed last so as to not change the behavior.
The one exception is sr_YU.ISO8859-2/LC_MONETARY where a file was being
replaced by a link.
The changes are:
- the microcore code loaded into the NAE has to be byteswapped
in LE
- the descriptors in memory for a P2P NAE descriptor has to be
byteswapped in LE
- the m_data pointer is already cacheline aligned, so the
unnecessary m_adj to cacheline size can be removed
- fix mask used to obtain physical address from the Tx freeback
descriptor
- fix a compile error in code under #ifdef
Obtained from: Venkatesh J V <venkatesh.vivekanandan@broadcom.com>
The CMS output queue credit configuration register is 64 bit, so use
a 64 bit variable while updating it.
Obtained from: Venkatesh J V <venkatesh.vivekanandan@broadcom.com>
Update MDIO reset code to support Broadcom XLP B1 revisions.
Update nlm_xlpge_ioctl, nlm_xlpge_port_enable need not be
called after nlm_xlpge_init.
Obtained from: Venkatesh J V <venkatesh.vivekanandan@broadcom.com>
Support few more versions of board firmware. In case the security
block is disabled, enable it at boot. Also increase the excluded
memory region to cover the area used by the firmware to initialize
devices.
Update the function xlp_pcib_hardware_swap_enable() to do nothing
when BYTE_ORDER is not BIG_ENDIAN. PCIe hardware swap is not requred
in little-endian mode as the endianness matches that of CPU.
reading registers from other CPUs. As it turns out, the hardware doesn't
really like concurrent IPI'ing causing adverse effects. Also the thought
deadlock when using this spin lock here and the targeted CPU(s) are also
holding or in case of nested locks can't actually happen. This is due to
the fact that on sparc64, spinlock_enter() only raises the PIL but doesn't
disable interrupts completely. Thus direct cross calls as used for the
register reading (and all other MD IPI needs) still will be executed by
the targeted CPU(s) in that case.
MFC after: 3 days
FreeBSD TCP-level socket options (only the first two are). Instead,
using a mapping function and fail unsupported options as we do for other
socket option levels.
MFC after: 2 weeks
comconsole setup. Previously the hint would be set when if you set a
custom port, but it would not be updated if you later set a custom speed.
Also, leave the hw.uart.console hint mutable so it can be overridden or
unset by the user if needed.
Reviewed by: kib (earlier version)
MFC after: 1 week
The previous change accidentally left the substraction we
were trying to avoid in case that i_blocks could become
negative.
Reported by: bde
MFC after: 4 days
By setting dev.netmap.fwd=1 (or enabling the feature with a per-ring flag),
packets are forwarded between the NIC and the host stack unless the
netmap client clears the NS_FORWARD flag on the individual descriptors.
This feature greatly simplifies applications where some traffic
(think of ARP, control traffic, ssh sessions...) must be processed
by the host stack, whereas the bulk is handled by the netmap process
which simply (un)marks packets that should not be forwarded.
The default is chosen so that now a netmap receiver operates
in a mode very similar to bpf.
Of course there is no free lunch: traffic to/from the host stack
still operates at OS speed (or less, as there is one extra copy in
one direction).
HOWEVER, since traffic goes to the user process before being
reinjected, and reinjection occurs in a user context, you get some
form of livelock protection for free.
Otherwise with '-v' we print out the file name as if it was copied:
/tmp/2gb-card/M0132.CTG not overwritten
/mnt/DCIM/CANONMSC/M0132.CTG -> /tmp/2gb-card/M0132.CTG
targets to be run without root privilege.
Information about ownership, group, flags, and suid bits are stored in
the file specified by METALOG which defaults to ${DESTDIR}/METALOG.
This file can be used in conjunction with bsdtar or makefs to generate
archives or file system images with correct permissions.
The packageworld target has been altered to use this metadata allowing
non-root releases (subject to further changes in release/Makefile.)
Sponsored by: DARPA, AFRL
Reviewed by: ian, ray
