This keeps the existing El Torito entries for BIOS and UEFI boot code and
adds a GPT in the ISO image's System Area containing boot code for BIOS that
will load /boot/loader from the ISO filesystem and execute it. We then use
etdump to find the EFI System Partition image in the El Torito catalog and
add an entry to the GPT that allows EFI to find it.
Reviewed by: gjb, imp
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D15051
Pages allocated from a given reservation may belong to different
objects. It is therefore possible for vm_page_ps_test() to be called
with the base page's object unlocked. Check for this case before
asserting that the object lock is held.
Reported by: jhb
Reviewed by: kib
MFC after: 1 week
fget_cap() tries to do a cheaper snapshot of a file descriptor without
holding the file descriptor lock. This snapshot does not do a deep
copy of the ioctls capability array, but instead uses a different
return value to inform the caller to retry the copy with the lock
held. However, filecaps_copy() was returning 1 to indicate that a
retry was required, and fget_cap() was checking for 0 (actually
'!filecaps_copy()'). As a result, fget_cap() did not do a deep copy
of the ioctls array and just reused the original pointer. This cause
multiple file descriptor entries to think they owned the same pointer
and eventually resulted in duplicate frees.
The only code path that I'm aware of that triggers this is to create a
listen socket that has a restricted list of ioctls and then call
accept() which calls fget_cap() with a valid filecaps structure from
getsock_cap().
To fix, change the return value of filecaps_copy() to return true if
it succeeds in copying the caps and false if it fails because the lock
is required. I find this more intuitive than fixing the caller in
this case. While here, change the return type from 'int' to 'bool'.
Finally, make filecaps_copy() more robust in the failure case by not
copying any of the source filecaps structure over. This avoids the
possibility of leaking a pointer into a structure if a similar future
caller doesn't properly handle the return value from filecaps_copy()
at the expense of one more branch.
I also added a test case that panics before this change and now passes.
Reviewed by: kib
Discussed with: mjg (not a fan of the extra branch)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D15047
Half of implementations always failed (returned (-1)) and they were
previously used in only one place.
Reviewed by: kib, andrew
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15102
Also remove the commented out documentation. The documentation arrived
with the import of the copy.9 manpage. I suspect the implementations
came from NetBSD while bootstrapping the Arm and MIPS ports.
Reviewed by: andrew, jmallett
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15108
When ixgbe was converted to iflib, it lost the SIOCGI2C support
that allows ifconfig to print SFP state, optical light levels, etc.
Restore this by plugging in to the ifdi_i2c_req iflib method. Note
that the sanity checking on dev_addr that used to be done in ixgbe is
now done in iflib.
Reviewed by: erj, Matthew Macy <mmacy@mattmacy.io>
Sponsored by: Netflix
Adjust sys/conf/files and sys/modules/puc/Makefile to omit
pucdata.c now tht it's included by puc_pci.c.
Submitted by: Lakhan Shiva Kamireddy (with build fixes by me)
Pull Request: https://github.com/freebsd/freebsd/pull/136
Always take the AST path rather than calling MD functions which are
often implemented as always failing. The is the case on amd64, arm,
i386, and powerpc. This optimization (inherited from 4.4 Lite) is a
pessimization on those architectures and is the sole use of these
functions. They will be removed in a seperate commit.
Reviewed by: kib
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15101
This will faciliate a WITH_SYSTEM_LINKER option.
Reviewed by: dim
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15110
- Warn, don't exit, when SIOCSLAGGPORT returns an error.
When we exit with an error during lagg creation, a single
failed NIC (which no longer attaches) can prevent lagg
creation and other configuration, such as adding an IPv4
address, and thus leave a machine unreachable.
- Preserve non-EEXISTS errors for exit status from SIOCSLAGGPORT,
in case scripts are looking for it. Hopefully this can be
extended if other parts of ifconfig can allow a "soft" failure.
- Improve the warning message to mention what lagg and what
member are problematic.
Reviewed by: jtl, glebius
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D15046
For very large quotas, do the multiplication as a 64 bit value to avoid
overflow.
For very small block sizes (smaller than DEV_BSIZE), multiple first
before dividing by block size to avoid underflow.
PR: 227496
Submitted by: Per Andersson <pa AT chalmers.se>
Sponsored by: Dell EMC Isilon
This behavior is already documented by the man page, and suggested by POSIX.
Reviewed by: jhb
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D15099
Harry Schmalzbauer reports that some firmware, in his experience, trips
over the ESP we install due to the volume label. It has been theorized that
this is due to some confusion with the label and the path on the ESP to
boot1.efi.
Regardless, Harry found that renaming the label seems to fix it.
PR: 214282
MFC after: 3 days
Since we do free subtopic and desc in help_getnext(), we need to set them also
NULL, so we make sure we dont get double free().
Approved by: bapt
Differential Revision: https://reviews.freebsd.org/D15082
Previously the code only warned about the condition and then happily
proceeded to use the too large value resulting in the array
out-of-bounds access.
Obtained from: Panzura (Chuanbo Zheng)
MFC after: 10 days
Sponsored by: Panzura
With r328289 we attempt to make sure we free the resources allocated in
help_getnext(), however, it is possible that we get no resources allocated
and help_getnext() will return early.
Make sure we have pointers set to NULL early in help_getnext().
Reported by: Andy Fiddaman
This makes it more consistent with FreeBSD norms, rather than using Linux's
norms. Now, instead of needing an environment variable
video-mode=fslfb:1280x1024@60
Now one would use a hint:
hint.fb.0.mode=1280x1024@60
When the compressed ARC feature was added in commit d3c2ae1
the method of reference counting in the ARC was modified. As
part of this accounting change the arc_buf_add_ref() function
was removed entirely.
This would have be fine but the arc_buf_add_ref() function
served a second undocumented purpose of updating the ARC access
information when taking a hold on a dbuf. Without this logic
in place a cached dbuf would not migrate its associated
arc_buf_hdr_t to the MFU list. This would negatively impact
the ARC hit rate, particularly on systems with a small ARC.
This change reinstates the missing call to arc_access() from
dbuf_hold() by implementing a new arc_buf_access() function.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
supervised program. The existing -r option has a hard-coded delay of one
second. This change adds a -R option which takes a delay in seconds. This
can be used to prevent log spam and rapid restarts, similar to init(8)'s
behavior of adding a delay between rapid restarts when it's supervising a
program.
- Move all of the code responsible for transmitting log messages into a
separate function, fprintlog_write().
- Instead of manually modifying a list of iovecs, add a structure
iovlist with some helper functions.
- Alter the F_FORW (UDP message forwarding) case to also use iovecs like
the other cases. Use sendmsg() instead of sendto().
- In the case of F_FORW, truncate the message to a size dependent on the
address family (AF_INET, AF_INET6), as proposed by RFC 5426.
- Move all traditional message formatting into fprintlog_bsd(). Get rid
of some of the string copying and snprintf()'ing. Simply emit more
iovecs to get the job done.
- Increase ttymsg()'s limit of 7 iovecs to 32. Add a definition for this
limit, so it can be reused by iovlist.
- Add fprintlog_rfc5424() to emit RFC 5424 formatted log entries.
- Add a "-O" command line option to enable RFC 5424 formatting. It would
have been nicer if we supported "-o rfc5424", just like on NetBSD.
Unfortunately, the "-o" flag is already used for a different purpose
on FreeBSD.
- Don't truncate hostnames in the RFC 5424 case, as suggested by that
specific RFC.
For people interested in using this, this feature can be enabled by
adding the following line to /etc/rc.conf:
syslogd_flags="-s -O rfc5424"
Differential Revision: https://reviews.freebsd.org/D15011
'bool' is preferred to 'boolean_t'. We only get the boolean_t
definition by header pollution (though the same is true for
bool). Since we use both, switch entirely to bool.
Note: We still have TRUE/FALSE instead of true/false in heavy use in
the rest of the file. These are with ints of various flavors, so
that's appropriate, even though we should eventually migrate to bool
and true/false (though the tables they are in are nicely packed with
short and wouldn't be so nicely packed with bool, another reason
to leave it alone for now).
COP allows fine-grained control on whether to offload a TCP connection
using t4_tom, and what settings to apply to a connection selected for
offload. t4_tom must still be loaded and IFCAP_TOE must still be
enabled for full TCP offload to take place on an interface. The
difference is that IFCAP_TOE used to be the only knob and would enable
TOE for all new connections on the inteface, but now the driver will
also consult the COP, if any, before offloading to the hardware TOE.
A policy is a plain text file with any number of rules, one per line.
Each rule has a "match" part consisting of a socket-type (L = listen,
A = active open, P = passive open, D = don't care) and a pcap-filter(7)
expression, and a "settings" part that specifies whether to offload the
connection or not and the parameters to use if so. The general format
of a rule is: [socket-type] expr => settings
Example. See cxgbetool(8) for more information.
[L] ip && port http => offload
[L] port 443 => !offload
[L] port ssh => offload
[P] src net 192.168/16 && dst port ssh => offload !nagle !timestamp cong newreno
[P] dst port ssh => offload !nagle ecn cong tahoe
[P] dst port http => offload
[A] dst port 443 => offload tls
[A] dst net 192.168/16 => offload !timestamp cong highspeed
The driver processes the rules for each new listen, active open, or
passive open and stops at the first match. There is an implicit rule at
the end of every policy that prohibits offload when no rule in the
policy matches:
[D] all => !offload
This is a reworked and expanded version of a patch submitted by
Krishnamraju Eraparaju @ Chelsio.
Sponsored by: Chelsio Communications
Trampoline mappings are better treated as global since they are valid
in all address spaces, even for PTI. pmap_invalidate_range() must work
on global mappings for pti since kernel_pmap invalidations are really
same as for non-PTI.
Reviewed by: alc, markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
Differential revision: https://reviews.freebsd.org/D15052
[X86] Add 'sahf' CPU feature to frontend
Summary:
Make clang accept `-msahf` (and `-mno-sahf`) flags to activate the
`+sahf` feature for the backend, for bug 36028 (Incorrect use of
pushf/popf enables/disables interrupts on amd64 kernels). This was
originally submitted in bug 36037 by Jonathan Looney
<jonlooney@gmail.com>.
As described there, GCC also uses `-msahf` for this feature, and the
backend already recognizes the `+sahf` feature. All that is needed is
to teach clang to pass this on to the backend.
The mapping of feature support onto CPUs may not be complete; rather,
it was chosen to match LLVM's idea of which CPUs support this feature
(see lib/Target/X86/X86.td).
I also updated the affected test case (CodeGen/attr-target-x86.c) to
match the emitted output.
Reviewers: craig.topper, coby, efriedma, rsmith
Reviewed By: craig.topper
Subscribers: emaste, cfe-commits
Differential Revision: https://reviews.llvm.org/D43394
Pull in r328944 from upstream llvm trunk (by Chandler Carruth):
[x86] Expose more of the condition conversion routines in the public
API for X86's instruction information. I've now got a second patch
under review that needs these same APIs. This bit is nicely
orthogonal and obvious, so landing it. NFC.
Pull in r329414 from upstream llvm trunk (by Craig Topper):
[X86] Merge itineraries for CLC, CMC, and STC.
These are very simple flag setting instructions that appear to only
be a single uop. They're unlikely to need this separation.
Pull in r329657 from upstream llvm trunk (by Chandler Carruth):
[x86] Introduce a pass to begin more systematically fixing PR36028
and similar issues.
The key idea is to lower COPY nodes populating EFLAGS by scanning the
uses of EFLAGS and introducing dedicated code to preserve the
necessary state in a GPR. In the vast majority of cases, these uses
are cmovCC and jCC instructions. For such cases, we can very easily
save and restore the necessary information by simply inserting a
setCC into a GPR where the original flags are live, and then testing
that GPR directly to feed the cmov or conditional branch.
However, things are a bit more tricky if arithmetic is using the
flags. This patch handles the vast majority of cases that seem to
come up in practice: adc, adcx, adox, rcl, and rcr; all without
taking advantage of partially preserved EFLAGS as LLVM doesn't
currently model that at all.
There are a large number of operations that techinaclly observe
EFLAGS currently but shouldn't in this case -- they typically are
using DF. Currently, they will not be handled by this approach.
However, I have never seen this issue come up in practice. It is
already pretty rare to have these patterns come up in practical code
with LLVM. I had to resort to writing MIR tests to cover most of the
logic in this pass already. I suspect even with its current amount
of coverage of arithmetic users of EFLAGS it will be a significant
improvement over the current use of pushf/popf. It will also produce
substantially faster code in most of the common patterns.
This patch also removes all of the old lowering for EFLAGS copies,
and the hack that forced us to use a frame pointer when EFLAGS copies
were found anywhere in a function so that the dynamic stack
adjustment wasn't a problem. None of this is needed as we now lower
all of these copies directly in MI and without require stack
adjustments.
Lots of thanks to Reid who came up with several aspects of this
approach, and Craig who helped me work out a couple of things
tripping me up while working on this.
Differential Revision: https://reviews.llvm.org/D45146
Pull in r329673 from upstream llvm trunk (by Chandler Carruth):
[x86] Model the direction flag (DF) separately from the rest of
EFLAGS.
This cleans up a number of operations that only claimed te use EFLAGS
due to using DF. But no instructions which we think of us setting
EFLAGS actually modify DF (other than things like popf) and so this
needlessly creates uses of EFLAGS that aren't really there.
In fact, DF is so restrictive it is pretty easy to model. Only STD,
CLD, and the whole-flags writes (WRFLAGS and POPF) need to model
this.
I've also somewhat cleaned up some of the flag management instruction
definitions to be in the correct .td file.
Adding this extra register also uncovered a failure to use the
correct datatype to hold X86 registers, and I've corrected that as
necessary here.
Differential Revision: https://reviews.llvm.org/D45154
Together, these should ensure clang does not use pushf/popf sequences to
save and restore flags, avoiding problems with unrelated flags (such as
the interrupt flag) being restored unexpectedly.
Requested by: jtl
PR: 225330
MFC after: 1 week
