Commit Graph

629 Commits

Author SHA1 Message Date
Matt Jacob
74c7cee09a Add wx and ispfw loadable module defaults. 2000-06-17 23:09:51 +00:00
John Baldwin
1ddb0ab555 Add support for emulating the RDMSR and WRMSR instructions into BTX. In
theory, this should allow the K7V Athlon motherboard to boot ok with boot
virus protection enabled.  However, I have no hardware to test this.  It
shouldn't break anything though. :)

Prodded by:	Kelly Yancey <kbyanc@posi.net>
2000-06-17 06:45:40 +00:00
Daniel C. Sobral
f102f87438 Fix vocabulary juggling so that builtins voc is always searched before
forth vocabulary when initially creating the builtins. FICL 2.05 has a
better way to do this, but this works for now.

Fixes "?".
2000-06-16 05:04:05 +00:00
Daniel C. Sobral
ef34e89ba2 Revert to 1.8 2000-06-14 19:39:31 +00:00
Daniel C. Sobral
18ee60a576 Remove the setting of sourceid from bf_vm(), as bf_vm() really has
no clue.

Set sourceid to 0 when booting, which is the correct setting for stdin.

Set sourceid to an arbitrary fd when include'ing, preserving and restoring
the previous sourceid. This is possibly broken(), as 0 is a valid fd. Maybe
we should +1 to this value.

This fixes the version problem widely reported.
2000-06-14 19:37:00 +00:00
Paul Saab
cc3d937224 Delay calling the device cleanup routines until the absolute last
moment.  We were cleaning up after PXE too early and the module
dependancy code would not be able to load any files if it needed
too.
2000-06-14 10:34:29 +00:00
Paul Saab
f98558ff74 Make typing 'q' or 'Q' work for the show command as the pager prompt
says it should.
2000-06-14 09:05:03 +00:00
Peter Wemm
49e7f72d87 With apologies to dcs, temporarily comment out the version check code. It
is failing for everybody that I have spoken with that has tried it.

FreeBSD/i386 bootstrap loader, Revision 0.8
(root@outback.netplex.com.au, Tue Jun 13 23:26:49 PDT 2000)
Loader version 0.3+ required
Aborted!
start not found

Note that the 0.3+ message is from inside the arch-alpha block, not the
i386 block of code.  And even then, 0.8 is higher than 0.3.

This prevents the rest of the loader.conf stuff working. :-/
2000-06-14 07:18:18 +00:00
Peter Wemm
f71c01cc52 Borrow phk's axe and apply the next stage of config(8)'s evolution.
Use Warner Losh's "hint" driver to decode ascii strings to fill the
resource table at boot time.

config(8) no longer generates an ioconf.c table - ie: the configuration
no longer has to be compiled into the kernel.  You can reconfigure your
isa devices with the likes of this at loader(8) time:
  set hint.ed.0.port=0x320

userconfig will be rewritten to use this style interface one day and will
move to /boot/userconfig.4th or something like that.

It is still possible to statically compile in a set of hints into a kernel
if you do not wish to use loader(8).  See the "hints" directive in GENERIC
as an example.

All device wiring has been moved out of config(8).  There is a set of
helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98)
that extract the 'at isa? port foo irq bar' from the old files and produces
a hints file.  If you install this file as /boot/device.hints (and update
/boot/defaults/loader.conf - You can do a build/install in sys/boot) then
loader will load it automatically for you.  You can also compile in the
hints directly with:  hints "device.hints"  as well.

There are a few things that I'm not too happy with yet.  Under this scheme,
things like LINT would no longer be useful as "documentation" of settings.
I have renamed this file to 'NOTES' and stored the example hints strings
in it.  However... this is not something that config(8) understands, so
there is a script that extracts the build-specific data from the
documentation file (NOTES) to produce a LINT that can be config'ed and
built.  A stack of man4 pages will need updating. :-/

Also, since there is no longer a difference between 'device' and
'pseudo-device' I collapsed the two together, and the resulting 'device'
takes a 'number of units' for devices that still have it statically
allocated.  eg:  'device fe 4' will compile the fe driver with NFE set
to 4.  You can then set hints for 4 units (0 - 3).  Also note that
'device fe0' will be interpreted as "zero units of 'fe'" which would be
bad, so there is a config warning for this.  This is only needed for
old drivers that still have static limits on numbers of units.
All the statically limited drivers that I could find were marked.

Please exercise EXTREME CAUTION when transitioning!

Moral support by: phk, msmith, dfr, asmodai, imp, and others
2000-06-13 22:28:50 +00:00
Ruslan Ermilov
5737d0e1d4 Treat \t and \n inside /boot.config as whitespaces.
PR:		19215
2000-06-13 13:07:53 +00:00
Daniel C. Sobral
70e1899762 Fix REFILL. It must throw RESTART instead of OUTOFTEXT so that
execution can take place at the point where it stopped after the
input buffer has been refilled.

Add ANS Forth CORE EXT and FILE word SOURCE-ID.
2000-06-12 16:46:28 +00:00
Daniel C. Sobral
d742bdfc76 The word environment? returns a flag indicating whether the variable
was found or not. Fix it's usage. Alas, it caused no problem before,
besides leaving garbage in the stack, because refill, used by [if]
[else] [then], was broken.
2000-06-12 16:45:01 +00:00
Daniel C. Sobral
23bab6002c Make abort" functional in interpret mode. This behavior is undefined
by ANS Forth standard, but it's useful.

Also, define the constant true in a more strict way. C might garantee
2-complement math, but Forth doesn't.
2000-06-12 16:42:02 +00:00
Daniel C. Sobral
d2083bf417 Make comment reflect reality. 2000-06-12 16:40:00 +00:00
Daniel C. Sobral
e0d83caeed Put some version checking. 2000-06-07 22:19:49 +00:00
Daniel C. Sobral
a6a1d6e852 Bump loader version due to FICL (duh!) and copyin, copyout, setenv&cia. 2000-06-07 22:14:09 +00:00
Daniel C. Sobral
5ae8a644f6 Bump loader version due to copyin, copyout, setenv&cia. 2000-06-07 22:12:21 +00:00
Daniel C. Sobral
c1312289dd Modify boot-conf so it can take a kernel or directory name as
a parameter and dtrt.

Also, make boot-conf always unload first. There wasn't really any
point in not doing this, as the kernel _has_ to be loaded before
any other modules.

Tested by: dwhite
2000-06-07 22:10:05 +00:00
Daniel C. Sobral
f0b972df2f Add setenv, getenv, setenv?, unsetenv, copyin and copyout to FICL. 2000-06-07 22:07:01 +00:00
Daniel C. Sobral
14a7c31a0c Remove AGAIN definition, as FICL 2.04 provides it.
Add strlen, to help handling data generated by C code.

Add 2>r 2r>, because OO programming without them sucks.
2000-06-07 22:03:37 +00:00
Daniel C. Sobral
7015e7c9a1 Remove a bug that caused local variables declarations in the format
{ | internal -- } to be rejected.
2000-06-07 22:00:10 +00:00
Daniel C. Sobral
7632c12363 Place original builtins in a vocabulary called "builtins". This
is intended mainly for debuging purposes, but it can be used by
other words if done carefully.
2000-06-07 21:57:23 +00:00
Daniel C. Sobral
7302acac1c Remove residual printf.
Prodded by: msmith
2000-06-07 03:33:12 +00:00
Doug Rabson
e347aadd85 Record the new PALcode revision in the pcs structure after changing to
run OSF/1 PALcode.

Obtained from: NetBSD
2000-06-03 08:24:37 +00:00
Daniel C. Sobral
11b96475f7 Apply a number of fixes for the Alpha platform. 2000-06-02 20:07:56 +00:00
Daniel C. Sobral
b8e8da45a9 Add something that was missing from the original 2.04 distribution. 2000-06-02 13:49:09 +00:00
Daniel C. Sobral
b270590aeb Add "int" sized manipulation words. 2000-06-01 18:10:44 +00:00
Yoshihiro Takahashi
c787eb8a72 Sync with the following changes.
sys/boot/i386/btx/btx/Makefile          1.8
sys/boot/i386/btx/btx/btx.s             1.16 and 1.17
sys/boot/i386/btx/btxldr/btxldr.s       1.10
sys/boot/i386/loader/Makefile           1.45
2000-05-29 11:58:01 +00:00
Daniel C. Sobral
b6b204a98b Strip spaces and comments more agressively. 2000-05-26 22:58:10 +00:00
Daniel C. Sobral
7795d19132 Bring in FICL 2.04. No bump of loader version is required by this
commit.
2000-05-26 21:35:08 +00:00
Jake Burkholder
e39756439c Back out the previous change to the queue(3) interface.
It was not discussed and should probably not happen.

Requested by:		msmith and others
2000-05-26 02:09:24 +00:00
John Baldwin
e1efa49a84 Convert the short stub of real-mode code into 16-bit assembly. 2000-05-24 02:20:34 +00:00
Jake Burkholder
740a1973a6 Change the way that the queue(3) structures are declared; don't assume that
the type argument to *_HEAD and *_ENTRY is a struct.

Suggested by:	phk
Reviewed by:	phk
Approved by:	mdodd
2000-05-23 20:41:01 +00:00
John Baldwin
a1a611ed6b Grrr, fix a silly 'movl' -> 'movw' typo in both pxeldr and cdldr. Also,
remove unnecessary cruft from the Makefiles for both.
2000-05-23 12:31:32 +00:00
John Baldwin
af54a4fe47 Clean up some more 16-bit code and get rid of more m4 macros. 2000-05-23 12:28:31 +00:00
John Baldwin
638bac9fc0 Clean up all of the 16-bit assembly code in the x86 bootstrap to work
with the new binutils.  Now that we have a decent assembler, all the old
m4 macros are no longer needed.  Instead, straight assembly can be used
since as(1) now understands 16-bit addressing, branches, etc.  Also,
several bugs have been fixed in as(1), allowing boot0.s to be further
cleaned up.
2000-05-23 12:18:49 +00:00
Daniel C. Sobral
716f301734 Document abial's .#. 2000-05-23 11:47:23 +00:00
Tim Vanderhoek
b0d9eb06f9 Make this compile in case anyone ever wants to use the PC98 booter
on an IBM machine.  This fix matches i386/boot2/boot.c.

PR:	kern/7903
2000-05-21 05:27:56 +00:00
Daniel C. Sobral
aad477d890 One of loaders' bugs disappeared somewhere along the way. 2000-05-19 11:15:12 +00:00
Daniel C. Sobral
9ece4dbfe9 Move man page directives to common/Makefile.inc. 2000-05-19 08:52:16 +00:00
Daniel C. Sobral
536f89a623 This file got repo-copied to common/. 2000-05-19 08:44:48 +00:00
Daniel C. Sobral
a2aa3427cf Move man page directives to common/Makefile.inc. 2000-05-19 08:41:45 +00:00
Daniel C. Sobral
27391e65fd Remove INSTALL_FORTH stuff. 2000-05-19 08:40:37 +00:00
Daniel C. Sobral
6593d234e6 Move man page directives to common/Makefile.inc.
Remove INSTALL_FORTH stuff.
2000-05-19 08:40:11 +00:00
Daniel C. Sobral
d9f7c44adf Make corrections to allow for Alpha. 2000-05-18 12:44:50 +00:00
Doug Rabson
8bbd2c1e46 Only probe network settings on the first open of the network device.
The alpha firmware takes a seriously long time to open the network device
the first time.
2000-05-13 15:40:46 +00:00
David E. O'Brien
7f562b6673 The loader was written so that if /kernel was missing /kernel.old would
be booted.  Due to a bug, this wasn't happening.

There is still a lesser bug in that the loader decides which file to boot
after the 10sec count down.  This means the bootfile listed in the count
down in is wrong in the case where the loader will boot /kernel.old.
2000-05-13 02:45:11 +00:00
Peter Wemm
24d29b9649 Install the bootforth config files for the Alpha too. loader.conf should
be functional now.
2000-05-12 23:22:09 +00:00
Peter Wemm
dafe1ac0a0 Reactivate the FICL hooks to make it be compiled in, but also initialize
FICL.  bootforth is now live on the Alpha!

**BEWARE** - you *MUST* build and install a current libstand or you will
most likely get zfree() panics at loader startup.

We should now be able to set up the loader.conf stuff on the Alpha too.
2000-05-12 22:45:16 +00:00
Peter Wemm
4887dfcfd4 Stop libficl from using floating point registers - this was cauing
dictDelete() to fault early on the Alpha and was the original cause of
the Alpha ficl failures.
2000-05-12 21:51:20 +00:00
Peter Wemm
fa139a1ac3 Fix the Alpha loader the rest of the way. If FICL is present in
/boot/loader (even though it is 100% dormant in the Alpha version),
then the loader panics with a zfree error:Loading /boot/loader.test
  *** keyboard not plugged in...
  Console: SRM firmware console
  panic: zfree(0x2003cb58,4096): wild pointer
versus the exact same code but without FICL linked in:
  Loading /boot/loader
  Console: SRM firmware console
  VMS PAL rev: 0x1000600010114
  OSF PAL rev: 0x1000600020116
  Switch to OSF PAL code succeeded.

  FreeBSD/alpha SRM disk boot, Revision 0.1

This is almost certainly an alpha infrastructure bug, not a FICL
problem.  It's probably the same thing that made FICL fail for no
apparent reason on the Alpha.
2000-05-12 07:47:47 +00:00
Boris Popov
cf448cb2c9 long != int on Alphas. 2000-05-12 05:16:37 +00:00
Doug White
325bde0fb7 Remove metion of the 'magic options.' Apparently PXE doesn't require the
special options on 0.99c (it mumbles something about 'PXE server not found'
but works anyway), and it won't work at all with PXE 2.0.
2000-05-09 18:28:07 +00:00
Mike Smith
1fd777e1d5 Teach the alpha loader install process to make backup copies of the
boot programs when installing new versions.
2000-05-06 18:31:26 +00:00
John Baldwin
773065b3b8 Switch to using the .code16 as(1) directive and using 16-bit assembly
code instead of using 32-bit code and having to just "know" that it's
really 16-bit instructions when things run.  This also allows the code
to use fewer macros and more actual assembly statements, which eases
maintenance.  Unfortunately, due to as(1) brokenness, we still use m4
macros for all 16-bit addresses, and all short jumps (i.e., 8-bit
relative addresses in the jump instruction) must be wrapped in .code32
directives to avoid useless bloat by as(1).  This also fixes a few
problems that were preventing boot0 from compiling with the latest
and greatest version of as(1).
2000-05-05 13:22:10 +00:00
Paul Saab
90c25bd74a Remove the static heap. It is unknown why it was needed in the
beginning, but it no longer is required.  This has been tested with
many different revisions of the PXE rom from Intel.
2000-05-05 07:24:03 +00:00
Daniel C. Sobral
ff7e939c43 Lay the groundwork for on-demand dictionary expansion. 2000-05-05 02:06:38 +00:00
Daniel C. Sobral
20689aa3d4 Correct a bug whereby allocations to the dictionary would not be allowed
unless four times the space requested was available.
2000-05-04 23:23:13 +00:00
Daniel C. Sobral
4eb5b7979d Make documentation on recently added heap? command reflect reality. 2000-05-04 22:51:21 +00:00
Daniel C. Sobral
a1d54dfc62 Add "heap?" to loader's man page. 2000-05-04 21:26:26 +00:00
Daniel C. Sobral
19c80876dc Further improve ordering. 2000-05-04 21:22:55 +00:00
Daniel C. Sobral
c45393b59c Sort entries in FreeBSD-specific FICL commands. 2000-05-04 21:18:26 +00:00
Daniel C. Sobral
1ca3a0ce6a Add heap?, so we can tell how much free space we have left. 2000-05-04 20:41:30 +00:00
Yoshihiro Takahashi
86a5a8c251 - Removed hi-resolution mode supports.
- Added a dummy partition table.
2000-05-03 04:35:25 +00:00
Nick Hibma
65b674a33b Add the udbp module 2000-05-02 11:51:07 +00:00
Doug White
55ebf88553 Add man page for pxeboot.
Reviewed By:	asmodai
2000-05-02 05:01:38 +00:00
Peter Wemm
365c5db0a7 Add $FreeBSD$ 2000-05-01 20:32:07 +00:00
Peter Wemm
62470170de GC unused variable (size) 2000-05-01 18:03:15 +00:00
Peter Wemm
cd2d859cee Fix some warnings on the Alpha. sizeof() returns different things on
x86 and Alpha. Sigh.
2000-05-01 18:02:38 +00:00
Paul Saab
482cb52dcb Wrap the failure warnings around PXE_DEBUG in the cleanup routine.
It does not matter if they fail, so dont print anything about it
unless we are debugging.
2000-05-01 17:55:05 +00:00
Boris Popov
801e789e01 Update loader logic to distinguish modules vs. files.
Add support for module metadata. The old way of dependancy
handling will be supported for a while.

Reviewed by:	peter
2000-05-01 17:41:25 +00:00
Yoshihiro Takahashi
292feef381 Sync with sys/boot/i386/libi386/biosdisk.c revision 1.30. 2000-04-30 08:24:36 +00:00
Paul Saab
95394e643f Fall back to /pxeroot as the location of the NFS exported directory
if we are not given one by dhcp.
Remove extra includes while I am here.

Reminded by:	jlemon
2000-04-29 23:08:49 +00:00
Jonathan Lemon
8e30378f89 Teach the loader about the ext2fs filesystem, extended partitions, and
the new readdir function.
2000-04-29 20:49:33 +00:00
Paul Saab
f14ad6978f Make PXE do a dhcp request to find out where its files are. The
DHCP server is no longer required to also act as the NFS/TFTP
server.
2000-04-27 12:30:28 +00:00
Paul Saab
e7fd6f003e Don't report errors when we UDP_WRITE fails with a status of 1. 2000-04-27 03:23:50 +00:00
John Baldwin
eeb5db2946 Now that we are compiling PXE into libi386, we don't need ../libi386 in
.PATH anymore.
2000-04-26 19:54:49 +00:00
Paul Saab
d08ae64b1d Bring support in for Intel Wired for Management 1.1 (PXE 0.99 and
below).  This did not work previously because interrupts were
disabled when PXE calls were being made, and they must be enabled.
This should also allow us to be compliant with all newer PXE rom's
from Intel.

For PXE 0.99, this has been tested using the Intel N440BX motherboard
and I am confident it will work on the Intel L440GX motherboard.

Lots of help/information from: jhb, peter

I would like to thank Michael Johnston <michael.johnston@intel.com>,
Mike Henry <mike.henry@intel.com>, and all the other PXE developers
at Intel for their help, and information in helping solve this
problem.
2000-04-26 07:38:40 +00:00
John Baldwin
36273c5d79 Don't disable interrupts when calling a vm86 mode interrupt or routine
from user mode.  Don't disable interrupts when returning from vm86 mode
to user mode either.  Now, we only disable interrupts before calling a
hardware interrupt handler, which is the only time we _should_ be
disabling interrupts.

Because of this, err, feature, any routine that one called in vm86 mode
had to re-enable interrupts by setting the interrupt flag or interrupts
would remain disabled even after the routine returned.  For example, I
have a simple debugging routine that uses a vm86 mode function to dump
any arbitrary memory word that I use to read the BIOS timer or any other
memory location.  This function does 1 load instruction from memory and
then returns.  Since it didn't re-enable interrupts, the first time I
called it to read the BIOS timer, it disabled interrupts.   This also
affected the PXE bootstrap as it needs interrupts enabled while it is
processing.  This patch fixes both of those situations so that those
functions do not worry about having to enable interrupts.  Hardware
interrupt handlers worked fine with the old code because they always
enable interrupts as part of their routine.

If you have any problems with the loader after this commit, please
let me know.  I'd like to MFC it in a week or two since PXE support
needs it.

Noticed by:	ps, Michael Johnston <michael.johnston@intel.com>
2000-04-26 04:35:25 +00:00
Yoshihiro Takahashi
41088a06e7 Sync with the following changes.
sys/boot/i386/libi386/Makefile	1.16 and 1.17
sys/boot/i386/loader/Makefile	1.44
sys/boot/i386/loader/main.c	1.20
2000-04-23 09:33:31 +00:00
Paul Saab
43e797fd31 Move the building of the PXE module into libi386. 2000-04-21 22:06:02 +00:00
Paul Saab
2339dc037f Make the loader a little smarter about when it is and is not allowed
to call PXE.
2000-04-21 04:58:51 +00:00
Paul Saab
5d5b2077f1 Don't call the PXE cleanup routine if PXE is not enabled. This
should fix the "Invalid partition table" error people were seeing.
2000-04-21 03:04:16 +00:00
Paul Saab
6450dd3cb4 Add a cleanup function. This is needed for PXE where you should
shutdown the UNDI and unload the stack.
2000-04-20 00:06:15 +00:00
Paul Saab
e938899cc3 Use !PXE api over PXENV+ api.
Magic trampoline by: peter (at 4am and after a good whipping at airhockey)
Do a better job of returning and detecting errors.
2000-04-19 11:22:38 +00:00
Mike Smith
300451c472 Some more i386-only BIOS-friendliness:
- Add support for using the PCI BIOS functions for configuration space
   accesses, and make this the default.

 - Make PNPBIOS the default (obsoletes the PNPBIOS config option).

 - Add two new boot-time tunables to disable each of the above.
2000-04-16 20:48:33 +00:00
Yoshihiro Takahashi
b638de134f The printf function of boot2 can't recognize "%lx" format.
Submitted by:	Nobuyuki Koganemaru <kogane@koganemaru.co.jp>
2000-04-14 14:25:13 +00:00
Yoshihiro Takahashi
1e6081a12f Merged from sys/boot/i386/loader/Makefile revision 1.43. 2000-04-14 13:51:14 +00:00
KATO Takenori
117a0be4e9 Merged from sys/boot/i386/loader/main.c rev 1.19. 2000-04-12 11:17:08 +00:00
John Baldwin
2cb6d95d48 Add a missing dependency: boot2 depends on the BTX kernel. 2000-04-11 14:49:13 +00:00
Jordan K. Hubbard
4fbd258bcc Nuke duplicate struct declaration from somebody's paste-o 2000-04-08 22:50:18 +00:00
Paul Saab
d8af287caf Make PXE use the UDP API. This allows for both TFTP and NFS support.
You may specify TFTP or NFS via compile time options in the loader,
but not both at this time.

Also, remove a warning about not knowing how to boot from network
devices.  We can obviously do that now.
2000-04-08 01:22:14 +00:00
Paul Saab
dbe3e0f575 Add a missing PXE API call and structure. 2000-04-04 07:28:54 +00:00
Paul Saab
2efc827d19 Add all the PXE related structures from the 2.1 PXE spec from Intel.
Fix exsisting code to match the spec.
2000-04-04 00:38:59 +00:00
KATO Takenori
c1cdadfffe Synced with following files:
src/sys/boot/i386/Makefile.inc	1.1
  src/sys/boot/i386/btx/btx/btx.s	1.15
  src/sys/boot/i386/btx/btxldr/Makefile	1.8
  src/sys/boot/i386/btx/btxldr/btxldr.s	1.9
  src/sys/boot/i386/libi386/biosdisk.c	1.29
  src/sys/boot/i386/loader/Makefile	1.42
  src/sys/boot/i386/loader/main.c	1.18
(entry point address of loader was not changed.)

Reviewed by:	nyan
2000-03-31 16:03:02 +00:00
KATO Takenori
fdf884ea55 Separated serial boot block interface routine into NS16550 stuff and
i8251 stuff.
2000-03-30 09:25:03 +00:00
John Baldwin
48a0c4ea04 Mega i386 loader commit.
- Don't hard code 0x10000 as the entry point for the loader.  Instead add
  src/sys/boot/i386/Makefile.inc which defines a make variable with the
  entry point for the loader.  Move the loader's entry point up to
  0x20000, which makes PXE happy.
- Don't try to use cpp to parse btxldr for the optional BTXLDR_VERBOSE,
  instead use m4 to achieve this.  Also, add a BTXLDR_VERBOSE knob in the
  btxldr Makefile to turn this option on.
- Redo parts of cdldr's Makefile so that it now builds and installs cdboot
  instead of having i386/loader/Makefile do that.  Also, add in some more
  variables to make the pxeldr Makefile almost identical and thus to ease
  maintainability.
- Teach cdldr about the a.out format.  Cdldr now parsers the a.out header
  of the loader binary and relocates it based on that.  The entry point of
  the loader no longer has to be hardcoded into cdldr.  Also, the boot
  info table from mkisofs is no longer required to get a useful cdboot.
- Update the lsdev function for BIOS disks to parse other file systems
  (such as DOS FAT) that we currently support.  This is still buggy as
  it assumes that a floppy with a DOS boot sector actually has a MBR and
  parses it as such.  I'll be fixing this in the future.
- The biggie:  Add in support for booting off of PXE-enabled network
  adapters.  Currently, we use the TFTP API provided by the PXE BIOS.
  Eventually we will switch to using the low-level NIC driver thus
  allowing both TFTP and NFS to be used, but for now it's just TFTP.

Submitted by:	ps, alfred
Testing by:	Benno Rice <benno@netizen.com.au>
2000-03-28 01:19:53 +00:00
Yoshihiro Takahashi
b0198bb46f Sync with sys/boot/i386/libi386/biosdisk.c revision 1.27 and 1.28.
Submitted by:	Kaho Toshikazu <kaho@elam.kais.kyoto-u.ac.jp>
2000-03-17 12:38:36 +00:00
John Baldwin
7be31bb1b2 Remove some extra spammage that made it into this commit. This will be
revisited later with a better fix, or at least one that compiles. :)

Approved by:	dcs
2000-03-15 16:36:55 +00:00
Daniel C. Sobral
7b12e51659 Pass an unit number to bcache_strategy, so it can flush the cache when
necessary. Pass an absolute block number too, instead of receiving a
relative one in realstrategy(), as bcache_strategy() requires this.

The fix is sligthly different from the one in the PR.

PR:		17098
Submitted by:	John Hood <jhood@sitaranetworks.com>
2000-03-15 01:58:45 +00:00