the same vmspace, decrement the reference count of the shared LDT instead
of a newly-made copy. Code factually removed LDT from the process that
did rfork(0).
Introduce user_ldt_deref() function that does decrement of refcount for
the struct proc_ldt, and call it in the rfork(0) case on the shared LDT.
Reviewed by: jhb
MFC after: 1 week
The user_ldt_free() function shall return with dt_lock unlocked.
Error handling code in both functions do not handle this, fix it by
doing necessary lock/unlock.
While there, fix minor style nits.
MFC after: 1 week
code. We only attempt a single reset using this method (a "hard" reset),
and we use two writes to ensure there is a 0 -> 1 transition in bit 2 to
force a reset.
MFC after: 1 week
- Fix nexus_setup_intr() abuse of setting up multiple IRQs in one go. Calling
arm_setup_irqhandler() in loop is bogus, as there's just one cookie given
from the caller and it is overwritten in each iteration so that only the
last handler's cookie value prevails.
- Proper intr masking/unmasking handling: the IRQ source is masked at PIC level
only after the last handler has been removed from the list.
Reviewed by: cognet, imp, sam, stass
Obtained from: Grzegorz Bernacki gjb ! semihalf dot com
isn't fixed to only open the network device once and not do a open
and close dance on every file access; the firmwares of newer sparc64
machines perform an auto-negotiation with every open which in turn
causes netbooting to take horribly long if we open and close the
device over and over again.
Safari- and JBus-based machines. Currently the main purpose of
these drivers is debugging of the resource allocation on nexus(4)
and the register content of these devices though.
ttydevsw_outwakeup(). This should fix panics which occur after remote
login sessions timeout during moderate TTY activity. An example of
where this might occur is where a pending write to the terminal is
occurring while sshd(8) is shutting down the TTY after a TCP timeout.
Submitted by: ed
the locked entry in it16 slot 0, which typically is occupied by the
PROM, and manually entering locked entries in slots != 0.
Thanks to Hubert Feyrer for donating the Blade 2000 this change was
developed on.
of spurious witness warnings since lockmgr grew witness support. Before
this, every time you passed an interlock to a lockmgr lock WITNESS treated
it as a LOR.
Reviewed by: attilio
memory-mapped config access. Add a workaround for these systems by
checking the first function of each slot on bus 0 using both the
memory-mapped config access and the older type 1 I/O port config access.
If we find a slot that is only visible via the type 1 I/O port config
access, we flag that slot. Future PCI config transactions to flagged
slots on bus 0 use type 1 I/O port config access rather than memory mapped
config access.
detaching that when the USB is pulled out forcibly during the driver is
running background scan, a page fault can be occurred even if we called
usb_rem_task() when detaching. It looks like a kind of races.
as with getdents64. The last byte is used for storing
the d_type, add this to plain getdents case where it was
missing before. Also change the code to use strlcpy instead
of plain strcpy. This changes fix the getdents crash we
had reports about (hl2 server etc.)
PR: kern/117010
MFC after: 1 week
Submitted by: Dmitry Chagin (dchagin@)
Tested by: MITA Yoshio <mita ee.t.u-tokyo.ac jp>
Approved by: kib (mentor)
congestion window not being incremented, if cwnd > maxseg^2.
As suggested in RFC2581 increment the cwnd by 1 in this case.
See http://caia.swin.edu.au/reports/080829A/CAIA-TR-080829A.pdf
for more details.
Submitted by: Alana Huebner, Lawrence Stewart,
Grenville Armitage (caia.swin.edu.au)
Reviewed by: dwmalone, gnn, rpaulo
MFC After: 3 days
be un-cached. Our previous memory barrier was not sufficient. This patch
allocates the IGP GART tables using the BUS_DMA_NOCACHE flag to get these
cards working.
Approved by: kib
calls to bus_dma. There were multiple paths that held different locks or
no locks at all. This patch ensures that all of the calling paths drop
their lock(s) before calling drm_pci_alloc().
Reviewed by: kib
- Set UMA_ZONE_NOFREE so that the per-turnstile spin locks are type stable
to avoid a race where one thread might dereference a lock in a free'd
turnstile that was previously used by another thread.
Theorized by: tegge (2)
MFC after: 1 week
for all three contexts and configure the dt512_1 to hold 4MB pages for
them (e.g. for direct mappings).
This might allow for additional optimization by using the faulting
page sizes provided by AA_DMMU_TAG_ACCESS_EXT for bypassing the page
size walker for the dt512 in the superpage support code.
Submitted by: nwhitehorn (initial patch)
to synchronization needed after stores to internal ASIs in order
to make side-effects visible. This mainly requires the MEMBAR #Sync
after such stores to be replaced with a FLUSH. We use KERNBASE as
the address to FLUSH as it is guaranteed to not trap. Actually,
the USII synchronization rules also already require a FLUSH in
pretty much all of the cases changed.
We're also hitting an additional USIII synchronization rule which
requires stores to AA_IMMU_SFSR to be immediately followed by a DONE,
FLUSH or RETRY. Doing so triggers a RED state exception though so
leave the MEMBAR #Sync. Linux apparently also has gotten away with
doing the same for quite some time now, apart from the fact that
it's not clear to me why we need to clear the valid bit from the
SFSR in the first place.
Reviewed by: nwhitehorn
the ncr53c9x.c core where it actually belongs so future front-ends
don't need to add it.
o Use the correct OFW property when looking for the initiator ID of the
SBus device.
o Don't specify an alignment when creating the parent DMA tag for
SUNW,fas; their DMA engine doesn't require an alignment constraint
and it's no inherited by the child DMA tags anyway (which probably
is a bug though).
o Drop the superfluous sc_maxsync and use sc_minsync instead. The
former apparently was added due to a confusion with the maximum
frequency used in cam(4), which basically corresponds to the
inverse of minimum sync period.
o Merge ncr53c9x.c from NetBSD:
1.116: NCRDMA_SETUP() should be called before NCR_SET_COUNT() and
NCRCMD_DMA command in ncr53c9x_select().
1.125: free allocated resources on detach.
o Static'ize ncr53c9x_action(), ncr53c9x_init() and ncr53c9x_reset()
as these are not required outside of ncr53c9x.c.
o In ncr53c9x_attach() don't leak the device mutex in case attaching
fails.
o Register an asynchronous notification handler so in case cam(4)
reports a lost device we can cancel outstanding commands and
restore the default parameters for the target in question.
o For FAS366 correctly support 16-bit target IDs and let it know
that we use 32-bit transfers.
o Overhaul the negotiation of transfer settings. This includes
distinguishing between current and goal transfer settings of the
target so we can renegotiate their goal settings when necessary
and correcting the order in which tagged, wide and synchronous
transfers are negotiated.
o If we are requesting sense, force a renegotiation if we are
currently using anything different from asynchronous at 8 bit
as the target might have lost our transfer negotiations.
o In case of an XPT_RESET_BUS just directly call ncr53c9x_init()
instead of issuing a NCRCMD_RSTSCSI, which in turn will issue an
interrupt that is treated as an unexpected SCSI bus reset by
ncr53c9x_intr() and thus calls ncr53c9x_init(). Remove the now
no longer used ncr53c9x_scsi_reset().
o Correct an off-by-one error when setting cpi->max_lun.
o In replace printf(9) with device_printf(9) calls where appropriate
and in ncr53c9x_action() remove some unnecessarily verbose messages.
o In ncr53c9x_sched() use TAILQ_FOREACH() instead of reimplementing
it and consolidate two tagging-related target info checks into one.
o In ncr53c9x_done() set the CAM status to CAM_SCSI_STATUS_ERROR when
appropriate, respect CAM_DIS_AUTOSENSE and teach it to return SCSI
status information.
o In ncr53c9x_dequeue() ensure the tags are cleared.
o Use ulmin() instead of min() where appropriate.
o In ncr53c9x_msgout() consistently use the reset label.
o When we're interrupted during a data phase and the DMA engine is
still active, don't panic but reset the core and the DMA engine as
this should be sufficient. Also, the typical problem for triggering
this was the lack of renegotiation when requesting sense.
o Correctly handle DEVICE RESETs.
o Adapt the locking of esp(4) to MPSAFE cam(4). This includes moving
the calls of lsi64854_attach() to the bus front-ends so it can pass
the esp(4) mutex to bus_dma_tag_create(9).
o Change the LSI64854 driver to not create a DMA tag and map for the
Ethernet channel as le(4) will handle these on its own as well as
sync and unload the DMA maps for the SCSI and parallel port channel
after a DMA transfer.
o Cam(4)'ify some NetBSD-centric comments.
o Use bus_{read,write}_*(9) instead of bus_space_{read,write}_*(9)
and take advantage of rman_get_rid(9) in order to save some softc
members.
Reviewed by: scottl
MFC after: 1 month
it had been assigned to the last sleeping thread. That thread might have
started running on another CPU and have reused that sleep queue. Fix it
by just walking the thread queue using TAILQ_FOREACH_SAFE() rather than
a while loop.
PR: amd64/124200
Discovered by: tegge
Tested by: benjsc
MFC after: 1 week
but needs a lot more work. In particular, it has no flow control and has
a tendency to race when giving commands. It still uses Giant for the
tty and driver lock, but this is a keep-it-simple feature for now.
Some of the [temporary] proliferation of messages lines are way too long.
