Without this the user has to mess with 'make -f Makefile.inc1 ...' to figure
out where the files are installed in the OBJDIR and then they need to copy them
to where they really wanted them. Using DESTDIR may be problematic after
r325001 as well.
The files will be installed to DESTDIR/NXTP where NXTP defaults to /nxb-bin.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
The top of Makefile.inc1 requires TARGET/TARGET_ARCH be defined. Just
building 'make xdev' would already set them, so this error was never
triggered. Moving it to Makefile fixes the problem.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Make armv7 as a new MACHINE_ARCH.
Copy all the places we do armv6 and add armv7 as basically an
alias. clang appears to generate code for armv7 by default. armv7 hard
float isn't supported by the the in-tree gcc, so it hasn't been
updated to have a new default.
Support armv7 as a new valid MACHINE_ARCH (and by extension
TARGET_ARCH).
Add armv7 to the universe build.
Differential Revision: https://reviews.freebsd.org/D12010
Consolidate all the regular expressions to convert from MACHINE_ARCH
to MACHINE_CPUARCH into a variable and use that variable in preference
to the almost identical copies in the tree (which should have been
identical).
Differential Revision: https://reviews.freebsd.org/D11986
Previously we excluded riscv from make universe / tinderbox if the
required xtoolchain package was not installed. Make that logic generic
so that we can loop over multiple architectures, in preparation to test
patches to have other architectures rely on external toolchain.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D11652
It appears that the same arches that lack GENERIC kernel configs also lack
LINT. But enough different arches get built to ensure a kernel change
should build everywhere (32 and 64 bit, clang and old gcc, little and big
endian).
just the GENERIC kernels for each arch (including variations such as
GENERIC-NODEBUG, GENERIC64, etc).
This helps with quickly doing a test build for all[*] arches without
building dozens of variant kernels for the arches that have lots of
hardware/board/system variations.
[*] Not all arches have a generic kernel (but they probably should for
test-building purposes, even if it can't boot on any real hardware).
Normally META_MODE ignores host files for "meta mode" decisions on whether a
file should be rebuilt or not. This is because a simple installworld can
update timestamps and cause the next build to rebuild all host tools, when the
previous ones may not have any changes in the source tree. These tools are
normally still ABI compatible. They are only rebuilt if NO_META_IGNORE_HOST is
set from the workaround/hack in r301467.
One of the major problems with this is when a host tool has objects spread
across many revisions that have mixed-ABI. For example, if struct stat were to
change on the host, some objects for a tool may have different ideas of that
struct's definition. If just 1 source file were modified and rebuilt and
linked into the tool, then that toll will have mixed-ABI objects and crash.
This exact thing happened with the ino64 commit in r301467 followed by a
trivial update to libbfd in r318750. The resulting binary would crash in
buildworld.
Sponsored by: Dell EMC Isilon
Right after cross-tools, a compiler-metadata.mk file is created that
stores all of the bsd.compiler.mk metadata. It is then read in
with a fail-safe during installworld time.
The file is explicitly removed when invoking cross-tools to ensure that
a stale file is not left around from odd manual 'make _cross-tools' ->
'make installworld' invocations.
This fixes several issues:
- With WITH_SYSTEM_COMPILER (default yes on head and no on releng/11.0):
If you build on a system where the bootstrap compiler does not
build due to the host compiler matching the in-tree one, but then
installworld on another system where that logic fails (a
bootstrap compiler is needed), the installworld immediately fails
with:
sh: cc: not found
Note that fixing this logic may then hit a case where a rebuild is
attempted in installworld. Normally cc would be ran with
'CFLAGS+=ERROR-tried-to-rebuild-during-make-install' to cause an
error such as:
cc: error: no such file or directory: 'ERROR-tried-to-rebuild-during-make-install'
However, now it will just fail with the 'cc: not found' error.
Inspection of the compile line will show
'ERROR-tried-to-rebuild-during-make-install'; It's not useful to
set CC to anything other than 'cc' during install as it is more
helpful to see the attempted compile rather than some other bogus
error.
- This now avoids running bsd.compiler.mk (cc executions) even more
during installworld. There are compiler-dependent SUBDIR in the
tree which required having a compiler during install.
There is at least 1 case where CC is still executed in the install,
such as from a LOOKUP!= in secure/lib/libcrypto/Makefile.inc checking
for 'vzeroall' support. This is not significant for installworld
as the lookup has a fallback (and hides its error) and only modifies CFLAGS,
thus it's not worth fixing.
PR: 212877
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
As of r316629 FreeBSD/arm64 uses the in-tree LLD linker by default, and
does not require an external an aarch64-binutils port or package.
Sponsored by: The FreeBSD Foundation
Hardfloat is now default (use riscv64sf as TARGET_ARCH
for softfloat).
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D8529
Summary:
The Freescale e500v2 PowerPC core does not use a standard FPU.
Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor
unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the
stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this.
Additionaly, the SPE opcodes overlap with Altivec, so these are mutually
exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was
created with the same function set as in powerpc/powerpc/altivec.c, so it
becomes effectively a drop-in replacement. setjmp/longjmp were modified to save
the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by
the SPE).
Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not
support double-precision floating point.
Also, without a new MACHINE_ARCH it would be impossible to provide binary
packages which utilize the SPE.
Additionally, no work has been done to support ports, work is needed for this.
This also means no newer gcc can yet be used. However, gcc's powerpc support
has been refactored which would make adding a powerpcspe-freebsd target very
easy.
Test Plan:
This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222
(P1022-based) board, compiled against the new ABI. Base system utilities
(/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot
multiuser.
Reviewed By: bdrewery, imp
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D5683
1. Always calculate what the expected values are.
2. Add 'make test-system-compiler' to show all of the computed values
vs the wanted values.
3. Extend the .info line to buildkernel/kernel-toolchain/toolchain/_cross-tools.
4. Consolidate all of the logic to one condition.
MFC after: 3 days
Sponsored by: EMC / Isilon Storage Division
This also adds missing s/aarch64/arm64 to the sys.mk version and also
adds back armv6hf for universe since it was added to the sys.mk version
in r300438.
MFC after: 3 days
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D7159
installkernel is technically META_MODE safe but doesn't need an explicit
approval to use it since it's all disabled via .PHONY.
world uses 'make -B installworld' which already will disable META_MODE
via the -B (.MAKE.MODE=compat) usage.
Approved by: re (implicit)
Sponsored by: EMC / Isilon Storage Division
This was a flaw in my change in r287903 but also in the original change
in r282156 since it used empty(${TARGETS}) rather than empty(TARGETS).
Reported by: lidl
Approved by: re (gjb)
Sponsored by: EMC / Isilon Storage Division
This broke in r301887 with the meta mode whitelist. 'make showconfig'
still needs WITH_META_MODE support.
Approved by: re (implicit)
Sponsored by: EMC / Isilon Storage Division
This was broken in r301888.
fmake does not look in share/mk by default and thus does not yet
have MK_META_MODE set with default.
Pointyhat to: bdrewery
Approved by: re (implicit)
Sponsored by: EMC / Isilon Storage Division
- Move the sys.mk filemon requirement to bsd.init.mk as a warning.
This is intended only to show when building directly in a subdirectory
without filemon loaded.
- Move the error into Makefile and only apply it when building
from the META_TGT_WHITELIST target list.
-DNO_FILEMON can be used to suppress both the warning and the error but
makes WITH_META_MODE less useful. It will only compare build commands
in this mode rather than track all dependencies.
This fixes installing from a jail which doesn't need filemon in this
phase [1].
Reported by: Nikolai Lifanov <lifanov@mail.lifanov.com> [1]
Approved by: re (implicit)
Sponsored by: EMC / Isilon Storage Division
META_TGT_WHITELIST is added to define which build targets are safe for
meta mode. See comments for more details.
This fixes 'make delete-old-libs' to properly show the interactive
prompt.
Approved by: re (implicit)
Sponsored by: EMC / Isilon Storage Division
META_MODE may create cookies during staging of files to WORLDTMP that would
also prevent installation of the files to the final DESTDIR, since the cookie
already exists. This is not yet the case but will be soon. Prevent other
similar issues by disabling META_MODE for any top-level install targets.
Sponsored by: EMC / Isilon Storage Division
for the armv6 ABI switch. This also make WITH_LIBSOFT functional on
the arm platform. As a transition thing, this seems to work even
without switching the ABI (we basically build the same libraries
twice when MK_LIBSOFT=yes until the ABI cut over next
month). MK_LIBSOFT remains default no.
The inclusion of .MAKE.DEPENDFILE (.depend) has special logic in make
to ignore stale/missing dependencies. bmake 20160220 added a '.dinclude'
directive that uses the special logic for .depend when including the file.
This fixes a build error when a file is moved or deleted that exists in a
.depend.OBJ file. This happened in r292782 when sha512c.c "moved" and an
incremental build of lib/libmd would fail with:
make: don't know how to make /usr/src/lib/libcrypt/../libmd/sha512c.c. Stop
Now this will just be seen as a stale dependency and cause a rebuild:
make: /usr/obj/usr/src/lib/libmd/.depend.sha512c.o, 13: ignoring stale .depend for /usr/src/lib/libcrypt/../libmd/sha512c.c
--- sha512c.o ---
...
This rebuild will only be done once since the .depend.sha512c.o will
be updated on the build with the -MF flags.
This also removes -MP being passed for the .depend.OBJ generation (which
would create fake targets for system headers) since the logic is no
longer needed to protect from missing files.
Sponsored by: EMC / Isilon Storage Division
architectures we do not provide upstream pkg(8) packages.
This is not tied to anything as-is, and likely will break
your system if used (based on experience with testing with
powerpc).
There is an overwhelming amount of evil happening here,
so until the issues are fixed, it will not be tied into the
'packages' target.
Sponsored by: The FreeBSD Foundation
Replace `make regress` (legacy test make target) and `make test` (incomplete
test make target added with the FreeBSD test suite) with make check as it's
consistent with other open source projects.
`make check` defaults to running tests from `.OBJDIR`, but can be overridden
with the `CHECKDIR` variable.
Add `make checkworld` target to simplify running the FreeBSD test suite from
`TESTSBASE` (i.e. the top-level tests directory), similar to buildworld.
Document `make check` and `make checkworld` in build(7).
Other minor changes:
- Rename intermediate file (`Kyuafile.auto`) to `Kyuafile` to simplify
`make check`.
- Remove terse warnings attached to `beforetest`/`aftertest`.
- Add kyua binary check to check target in suite.test.mk; error out if it's
not found
The MFC is [partly] contingent on other build related changes being MFCed.
Differential Revision: https://reviews.freebsd.org/D4406
MFC after: 2 months
X-MFC to: stable/10
Relnotes: yes
Reviewed by: bdrewery, Evan Cramer <eccramer@gmail.com>
Sponsored by: EMC / Isilon Storage Division
"make kernels" is now shorthand for "make universe -DMAKE_JUST_KERNELS"
"make worlds" is now shorthand for "make universe -DMAKE_JUST_WORLDS"
The kernels target includes modules (unless you add -DNO_MODULES).
And of course you can still add all the other universe options, such as
"make kernels TARGETS=arm" to build kernels for all arm arches, or
TARGET_ARCH=armv6 to build all armv6 kernels, etc.
Reviewed by: imp
with -DNO_ROOT to create the METALOG mtree(8) file.
Separate the default STAGEDIR for world (WSTAGEDIR) and kernel
(KSTAGEDIR).
Fix the 'create-kernel-packages' target to work properly.
Evaluate if 'kernel' is set when invoking mtree-to-plist.awk,
which splits the kernel and kernel.debug into separate plist
files.
Fix METALOG creation when building/packaging multiple kernels.
Sponsored by: The FreeBSD Foundation
This is mostly targetting stable/10 which requires bmake to build and
has issues upgrading from <10.
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
PR: 198062
This will ensure that the variable was not set as a make override, in
make.conf, src.conf or src-env.conf. It allows setting the value in
src-env.conf when using WITH_AUTO_OBJ since that case properly handles
changing .OBJDIR (except if MAKEOBJDIRPREFIX does not yet exist which is
being discussed to be changed).
This change allows setting a default MAKEOBJDIRPREFIX via local.sys.env.mk.
Sponsored by: EMC / Isilon Storage Division
RISC-V is a new ISA designed to support computer research and education, and
is now become a standard open architecture for industry implementations.
This is a minimal set of changes required to run 'make kernel-toolchain'
using external (GNU) toolchain.
The FreeBSD/RISC-V project home: https://wiki.freebsd.org/riscv.
Reviewed by: andrew, bdrewery, emaste, imp
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
Differential Revision: https://reviews.freebsd.org/D4445
Say it with me, "I will not chain commands with && in Makefiles"
This was originally fixed and explained quite well by bde@ in r36074. The
initial bmake integration caused 'set -e' to stop being used which lead to
r252419. Later 'set -e' expectations were fixed with bmake in r254980.
Because of the && here, errors would be ignored when building in parallel and
a dependency failed. Such as bootstrap-tools since it builds everything in
parallel. If any tool failed in obj/depend/all, it would just ignore the error
and continue to build. This later would result in cascaded errors that only
confused the real issue. This could also cause commands after the failed
command to still execute, leading to more confusion.
This should be fine if the command is in a sub-shell such as: (cmd1 && cmd2)
This reverts r252419.
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
This allows META_FILES option to be renamed META_MODE.
Also add META_COOKIE_TOUCH for use in targets that can benefit
from a cookie when in meta mode.
Differential Revision: https://reviews.freebsd.org/D4153
Reviewed by: bdrewery
This leads the way for fixing cross-build cleanup, and eventually replacing
'cleandir' with it during the build.
Sponsored by: EMC / Isilon Storage Division
MFC after: 2 weeks
ccache is mostly beneficial for frequent builds where -DNO_CLEAN is not
used to achieve a safe pseudo-incremental build. This is explained in
more detail upstream [1] [2]. It incurs about a 20%-28% hit to populate the
cache, but with a full cache saves 30-50% in build times. When combined with
the WITH_FAST_DEPEND feature it saves up to 65% since ccache does cache the
resulting dependency file, which it does not do when using mkdep(1)/'CC
-E'. Stats are provided at the end of this message.
This removes the need to modify /etc/make.conf with the CC:= and CXX:=
lines which conflicted with external compiler support [3] (causing the
bootstrap compiler to not be built which lead to obscure failures [4]),
incorrectly invoked ccache in various stages, required CCACHE_CPP2 to avoid
Clang errors with parenthesis, and did not work with META_MODE.
The option name was picked to match the existing option in ports. This
feature is available for both in-src and out-of-src builds that use
/usr/share/mk.
Linking, assembly compiles, and pre-processing avoid using ccache since it is
only overhead. ccache does nothing special in these modes, although there is
no harm in calling it for them.
CCACHE_COMPILERCHECK is set to 'content' when using the in-tree bootstrap
compiler to hash the content of the compiler binary to determine if it
should be a cache miss. For external compilers the 'mtime' option is used
as it is more efficient and likely to be correct. Future work may optimize the
'content' check using the same checks as whether a bootstrap compiler is needed
to be built.
The CCACHE_CPP2 pessimization is currently default in our devel/ccache
port due to Clang requiring it. Clang's -Wparentheses-equality,
-Wtautological-compare, and -Wself-assign warnings do not mix well with
compiling already-pre-processed code that may have expanded macros that
trigger the warnings. GCC has so far not had this issue so it is allowed to
disable the CCACHE_CPP2 default in our port.
Sharing a cache between multiple checkouts, or systems, is explained in
the ccache manual. Sharing a cache over NFS would likely not be worth
it, but syncing cache directories between systems may be useful for an
organization. There is also a memcached backend available [5]. Due to using
an object directory outside of the source directory though you will need to
ensure that both are in the same prefix and all users use the same layout. A
possible working layout is as follows:
Source: /some/prefix/src1
Source: /some/prefix/src2
Source: /some/prefix/src3
Objdir: /some/prefix/obj
Environment: CCACHE_BASEDIR='${SRCTOP:H}' MAKEOBJDIRPREFIX='${SRCTOP:H}/obj'
This will use src*/../obj as the MAKEOBJDIRPREFIX and tells ccache to replace
all absolute paths to be relative. Using something like this is required due
to -I and -o flags containing both SRC and OBJDIR absolute paths that ccache
adds into its hash for the object without CCACHE_BASEDIR.
distcc can be hooked into by setting CCACHE_PREFIX=/usr/local/bin/distcc.
I have not personally tested this and assume it will not mix well with
using the bootstrap compiler.
The cache from buildworld can be reused in a subdir by first running
'make buildenv' (from r290424).
Note that the cache is currently different depending on whether -j is
used or not due to ccache enabling -fdiagnostics-color automatically if
stderr is a TTY, which bmake only does if not using -j.
The system I used for testing was:
WITNESS
Build options: -j20 WITH_LLDB=yes WITH_DEBUG_FILES=yes WITH_CCACHE_BUILD=yes
DISK: ZFS 3-way mirror with very slow disks using SSD l2arc/log.
The arc was fully populated with src tree files and ccache objects.
RAM: 76GiB
CPU: Intel(R) Xeon(R) CPU L5520 @2.27GHz
2 package(s) x 4 core(s) x 2 SMT threads = hw.ncpu=16
The WITH_FAST_DEPEND feature was used for comparison here as well to show
the dramatic time savings with a full cache.
buildworld:
x buildworld-before
+ buildworld-ccache-empty
* buildworld-ccache-full
% buildworld-ccache-full-fastdep
# buildworld-fastdep
+-------------------------------------------------------------------------------+
|% * # +|
|% * # +|
|% * # xxx +|
| |A |
| A|
| A |
|A |
| A |
+-------------------------------------------------------------------------------+
N Min Max Median Avg Stddev
x 3 3744.13 3794.31 3752.25 3763.5633 26.935139
+ 3 4519 4525.04 4520.73 4521.59 3.1104823
Difference at 95.0% confidence
758.027 +/- 43.4565
20.1412% +/- 1.15466%
(Student's t, pooled s = 19.1726)
* 3 1823.08 1827.2 1825.62 1825.3 2.0785572
Difference at 95.0% confidence
-1938.26 +/- 43.298
-51.5007% +/- 1.15045%
(Student's t, pooled s = 19.1026)
% 3 1266.96 1279.37 1270.47 1272.2667 6.3971113
Difference at 95.0% confidence
-2491.3 +/- 44.3704
-66.1952% +/- 1.17895%
(Student's t, pooled s = 19.5758)
# 3 3153.34 3155.16 3154.2 3154.2333 0.91045776
Difference at 95.0% confidence
-609.33 +/- 43.1943
-16.1902% +/- 1.1477%
(Student's t, pooled s = 19.0569)
buildkernel:
x buildkernel-before
+ buildkernel-ccache-empty
* buildkernel-ccache-empty-fastdep
% buildkernel-ccache-full
# buildkernel-ccache-full-fastdep
@ buildkernel-fastdep
+-------------------------------------------------------------------------------+
|# @ % * |
|# @ % * x + |
|# @ % * xx ++|
| MA |
| MA|
| A |
| A |
|A |
| A |
+-------------------------------------------------------------------------------+
N Min Max Median Avg Stddev
x 3 571.57 573.94 571.79 572.43333 1.3094401
+ 3 727.97 731.91 728.06 729.31333 2.2492295
Difference at 95.0% confidence
156.88 +/- 4.17129
27.4058% +/- 0.728695%
(Student's t, pooled s = 1.84034)
* 3 527.1 528.29 528.08 527.82333 0.63516402
Difference at 95.0% confidence
-44.61 +/- 2.33254
-7.79305% +/- 0.407478%
(Student's t, pooled s = 1.02909)
% 3 400.4 401.05 400.62 400.69 0.3306055
Difference at 95.0% confidence
-171.743 +/- 2.16453
-30.0023% +/- 0.378128%
(Student's t, pooled s = 0.954969)
# 3 201.94 203.34 202.28 202.52 0.73020545
Difference at 95.0% confidence
-369.913 +/- 2.40293
-64.6212% +/- 0.419774%
(Student's t, pooled s = 1.06015)
@ 3 369.12 370.57 369.3 369.66333 0.79033748
Difference at 95.0% confidence
-202.77 +/- 2.45131
-35.4225% +/- 0.428227%
(Student's t, pooled s = 1.0815)
[1] https://ccache.samba.org/performance.html
[2] http://www.mail-archive.com/ccache@lists.samba.org/msg00576.html
[3] https://reviews.freebsd.org/D3484
[5] https://github.com/jrosdahl/ccache/pull/30
PR: 182944 [4]
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
Relnotes: yes
Bmake has a documented feature of '-N' to skip executing commands which is
specifically intended for debugging top-level builds and not recursing into
sub-directories. This matches the older 'make -n' behavior we added which made
'-n -n' the recursing target and '-n' a non-recursing target.
Removing the '-n -n' feature allows the build to work as documented in
the bmake manpage with '-n' and '-N'. The older '-n -n' feature was also
not documented anywhere that I could see.
Note that the ${_+_} var is still needed as currently bmake incorrectly
executes '+' commands when '-N' is specified.
The '-n' and '-n -n' features were broken for several reasons prior to this.
r251748 made '_+_' never expand with '-n -n' which resulted in many
sub-directories not being visited until fixed 2 years later in r288391, and
many targets were given .MAKE over the past few years which resulted in
non-sub-make commands, such as rm and ln and mtree, to be executed.
This should also allow removing some indirection hacks in bsd.subdir.mk and
other cases of .USE that have a .MAKE by using '+'.
Sponsored by: EMC / Isilon Storage Division
Discussed on: arch@ (mostly silence)
The condition used matches the condition in sys.mk for setting _+_ to blank
or +.
With this -n will continue to not descend into Makefile.inc1, while -n -n will
and cause Makefile.inc1's target to run with -n.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
This is relevant for makeman using the 'make targets' output in src.conf(5).
This makes a _UNIVERSE_TARGETS that removes arm64 if the build
requirements are not met.
