and t_maxseg. This dualism emerged with T/TCP, but was not properly cleaned
up after T/TCP removal. After all permutations over the years the result is
that t_maxopd stores a minimum of peer offered MSS and MTU reduced by minimum
protocol header. And t_maxseg stores (t_maxopd - TCPOLEN_TSTAMP_APPA) if
timestamps are in action, or is equal to t_maxopd otherwise. That's a very
rough estimate of MSS reduced by options length. Throughout the code it
was used in places, where preciseness was not important, like cwnd or
ssthresh calculations.
With this change:
- t_maxopd goes away.
- t_maxseg now stores MSS not adjusted by options.
- new function tcp_maxseg() is provided, that calculates MSS reduced by
options length. The functions gives a better estimate, since it takes
into account SACK state as well.
Reviewed by: jtl
Differential Revision: https://reviews.freebsd.org/D3593
Fix const conversion warning in lz4_decompress which shows when warnings
are enabled (to be done later).
MFC after: 2 weeks
X-MFC-With: r293268
Sponsored by: Multiplay
Although we don't use it in tree yet libstand is installed as user-
facing /usr/liblibstand.a, and some work in progress makes use of it.
Instead of conflicting with ongoing libstand Makefile deduplication,
just add it now.
case they accidentally get created as directories or with flags that
prevent their removal. While I wouldn't normally go the extra mile
here and let the normal unix rules prevail, the effects of failure are
large enough that extra care is warranted.
This is based on the vidconsole implementation.
Submitted by: Toomas Soome <tsoome@me.com>
Reviewed by: adrian
MFC after: 2 weeks
Relnotes: Yes
Differential Revision: https://reviews.freebsd.org/D4797
indicates the 'release' target has run (in order to prevent
subsequent invocations that may clobber original build output).
As is, the 'release' target is a dummy target that does nothing
more than depend on subsequent targets. Unless 'make obj' is
invoked prior to 'make release', .OBJDIR and .CURDIR will always
be '/usr/src/release' (or wherever /usr/src is located).
When 'make release' invokes 'make real-release' (and subsequent
targets), .OBJDIR is not updated, which still leads to src/ tree
pollution.
While arguably a hack, 'make release' will invoke the original
dummy targets as originally intended, but instead of touching an
empty file (or returing @true), will call a 'release-done' target
that will trigger the behavior that was intended to prevent
a subsequent invocation.
Discussed with: hrs
MFC after: 3 days
X-MFC-With: r293173
Sponsored by: The FreeBSD Foundation
Fix a bug in rpcbind for multihomed hosts. If the server had interfaces on
two separate subnets, and a client on the first subnet contacted rpcbind at
the address on the second subnet, rpcbind would advertise addresses on the
first subnet. This is a bug, because it should prefer to advertise the
address where it was contacted. The requested service might be firewalled
off from the address on the first subnet, for example.
usr.sbin/rpcbind/check_bound.c
If the address on which a request was received is known, pass that
to addrmerge as the clnt_uaddr parameter. That is what addrmerge's
comment indicates the parameter is supposed to mean. The previous
behavior is that clnt_uaddr would contain the address from which the
client sent the request.
usr.sbin/rpcbind/util.c
Modify addrmerge to prefer to use an IP that is equal to clnt_uaddr,
if one is found. Refactor the relevant portion of the function for
clarity, and to reduce the number of ifdefs.
etc/mtree/BSD.tests.dist
usr.sbin/rpcbind/tests/Makefile
usr.sbin/rpcbind/tests/addrmerge_test.c
Add unit tests for usr.sbin/rpcbind/util.c:addrmerge.
usr.sbin/rpcbind/check_bound.c
usr.sbin/rpcbind/rpcbind.h
usr.sbin/rpcbind/util.c
Constify some function arguments
Reviewed by: imp
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D4690
- Rework MANIFEST generation and parsing via bsdinstall(8).
- Allow selecting debugging distribution sets during install.
- Rework bsdinstall(8) to fetch remote debug distribution sets
when they are not available on the local install medium.
- Allow selecting additional non-GENERIC kernels during install.
At present, GENERIC is still required, and installed by default.
Tested with: head@r293203
Sponsored by: The FreeBSD Foundation
This optimization is not proper (and causes kernel panic),
since driver checks fw_status to optimize away parsing stage
if it was already done.
Reported by: dchagin
Set _PATH_DEFPATH to
/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin. This is the
path in the default class in the default /etc/login.conf,
excluding ~/bin which would not be expanded properly in a string
constant.
For normal logins, _PATH_DEFPATH is overridden by /etc/login.conf,
~/.login_conf or shell startup files. _PATH_DEFPATH is still used as a
default by execlp(), execvp(), posix_spawnp() and sh if PATH is not set, and
by cron. Especially the latter is a common trap (most recently in PR
204813).
PR: 204813
Reviewed by: secteam (delphij), alfred
MIPS has/had a read-only DYNAMIC segment, and uses an extra level of
indirection (through MIPS_RLD_MAP) to locate the debugger rendezvous
data.
Some linkers (e.g. LLVM's lld) may produce MIPS binaries with a writable
DYNAMIC segment, which would allow us to eventually drop a special case.
Therefore, instead of hardcoding knowledge that DYNAMIC is not writable
on MIPS just check the permissions on the segment.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D4791
Advance the logical block number to the lblkno of the found block plus
one, instead of incrementing the block number which was used for
lookup. This change skips sparcely populated buffer ranges, similar
to r292325, instead of doing useless lookups.
Do not restart the bnoreuselist() from the start of the range if
buffer lock cannot be obtained without sleep. Only retry lookup and
lock for the same queue and same logical block number.
Reported by: benno
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
It was returning a pointer to stack-allocated memory, so make the
allocation at the caller instead.
Found by: clang static analyzer
Coverity: CID 1245774
Reviewed by: ed, rpaulo
Review URL: https://reviews.freebsd.org/D4740
the root filesystem read-write. This causes problems booting
the memstick installation medium from write-protected USB flash
drives.
Submitted by: A.J. Kehoe IV [1], Oliver Jones [2]
PR: 187161 [1], 205886 [2]
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
The fd is closed later in this case. This fixes a "SS_NOFDREF on enter"
panic.
Submitted by: Krishnamraju Eraparaju @ Chelsio
Reviewed by: Steve Wise @ Open Grid Computing
- Separate 'firmware_put(sc->fw_fp, FIRMWARE_UNLOAD); sc->fw_fp = NULL;'
into iwn_unload_firmware().
- Move error handling to the end of iwn_read_firmware().
No functional changes.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D4768
iwn(4) / wpi(4) works in the same way
(read_firmware() -> hw_init() -> firmware_put())
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D4766
rtwnfw got added in r293009 and depends on source-less and
non-free microcode in sys/contrib/dev/rtwn.
PR: 205874
Submitted by: Fabian Keil
Obtained from: ElectroBSD
entries data in unified format.
There are control plane functions that require information other than
just next-hop data (e.g. individual rtentry fields like flags or
prefix/mask). Given that the goal is to avoid rte reference/refcounting,
re-use rt_addrinfo structure to store most rte fields. If caller wants
to retrieve key/mask or gateway (which are sockaddrs and are allocated
separately), it needs to provide sufficient-sized sockaddrs structures
w/ ther pointers saved in passed rt_addrinfo.
Convert:
* lltable new records checks (in_lltable_rtcheck(),
nd6_is_new_addr_neighbor().
* rtsock pre-add/change route check.
* IPv6 NS ND-proxy check (RADIX_MPATH code was eliminated because
1) we don't support RTF_ANNOUNCE ND-proxy for networks and there should
not be multiple host routes for such hosts 2) if we have multiple
routes we should inspect them (which is not done). 3) the entire idea
of abusing KRT as storage for ND proxy seems odd. Userland programs
should be used for that purpose).
Just remove it completely from the test as it's initialized but unused apart
from the free(3) call
Differential Revision: https://reviews.freebsd.org/D4769 (part of larger diff)
MFC after: 5 days
Reported by: cppcheck
Reviewed by: oshogbo
Sponsored by: EMC / Isilon Storage Division
