This was intended to test the locking used in the MacOS X kernel on a
FreeBSD system, to make use of WITNESS and other debugging infrastructure.
This hasn't been used for ages, to take it out to reduce the #ifdef
complexity.
MFC after: 1 week
This test should no longer provoke large amounts of traffic, which can
overwhelm single-core systems, preventing them from making progress in the
tests.
The test can now be re-enabled.
PR: 246448
An EXAMPLE section was adding with some basic examples that show the use of
uniq(1) with various flags.
Submitted by: fernape@
Approved by: bcr@
MFC after: 4 days
Relnotes: yes (EXAMPLE section for uniq(1))
Differential Revision: https://reviews.freebsd.org/D25149
As timeout(9) was removed and all consumers were converted to
callout(9), reference it instead for the description of sbt, pr,
and flags arguments.
Reviewed by: trasz
Differential Revision: https://reviews.freebsd.org/D25165
Use %hs (locale-based encoding) instead of %s (UTF-8) format for
strings that are expected to be in current locale encoding (date/time,
process names/argument list).
PR: 241491
Reviewed by: phil
Differential Revision: https://reviews.freebsd.org/D22160
This logic is running the beacon receive bits in STA+AP mode on both the
STA and AP side. The STA side sees its beacons from the BSS fine; the
AP side is seeing other beacons on the same channel but with the BSS
node for some odd reason. (I think it's a valid reason, but I currently
forget what that valid reason is.)
So, just to be cleaner about things, don't run the nexttbtt/etc bits
at all if we're in hostap mode. If I ever get mesh working then maybe
I'll make sure it works right on mesh+ap and mesh+sta modes.
Whilst here, log the VAP i'm being called on to make it clearer what
is going on. I may end up adding a VAP dprintf version of this at
some point.
Tested:
* AR9380, STA (DWDS client) + hostap on the same NIC
This removes the requirement to know what's in the ifp.
(If someone wants a quick clean-up task, it'd be nice to convert instances
of ifp dereferencing for if_xname over to this method.)
Somewhat predictably, software often wants to use \x27/\x24 among others so
that they can decline worrying about ugly escaping, if said escaping is even
possible. Right now, this software is using these and getting the wrong
results, as we'll interpret those as x27 and x24 respectively. Some examples
of this, when an exp-run was ran, were science/octopus and misc/vifm.
Go ahead and process these at all times. We allow either one or two digits,
and the tests account for both. If extra digits are specified, e.g. \x2727,
then the third and fourth digits are interpreted literally as one might
expect.
PR: 229925
MFC after: 2 weeks
As of r361857 all BINUTILS options are disabled by default - ports
have been changed to depend on binutils if they require GNU as, and
all base system assembly files have been switched to use Clang's
integrated assembler.
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
This updates the logic to allow:
* A-MPDU if available;
* A-MSDU if available and A-MPDU is off/NACKed;
* A-MPDU+A-MSDU if it's available and negotiated;
* Fast frames if the node is 11abg (and not HT/VHT.)
This allows for things to fail back to A-MSDU or fast frames
if A-MPDU isn't available rather than needing to be non-HT/non-VHT.
It also allows A-MPDU+A-MSDU to work if it's negotiated.
Tested:
* AR9380, STA + AP mode (A-MPDU, A-MSDU, FF, A-MPDU+A-MSDU)
* RT5350, STA mode (A-MSDU, FF)
* AR9170, STA mode (A-MSDU, FF)
synchronous inode update.
The IN_SIZEMOD and IN_IBLKDATA flags indicate changes to the
file size and block pointer fields in the inode. When these
fields have been changed, the fsync() and fsyncdata() system
calls must write the inode to ensure their semantics that the
file is on stable store.
The IN_SIZEMOD and IN_IBLKDATA flags cannot be cleared until
a synchronous write of the inode is done. If they are cleared
on an asynchronous write, then the inode may not yet have been
written to the disk when an fsync() or fsyncdata() call is done.
Absent these flags, these calls would not know that they needed
to write the inode. Thus, these flags only can be cleared on
synchronous writes of the inode. Since the inode will be locked
for the duration of the I/O that writes it to disk, no fsync()
or fsyncdata() will be able to run before the on-disk inode
is complete.
Reviewed by: kib
MFC with: -r361785
Differential revision: https://reviews.freebsd.org/D25072
Add xref to all SIM devices we currently have (including a rough indication
which ones are likely to fail).
Update to include all the CAM options.
Fix a few igor nits while I'm here.
Some automation tries to detect if nvd or nda is in used, and the presence of
both confuses it. Provide a knob to turn off nvd alias creation
(kern.cam.nda.nvd_compat=0) for these situations. The default is the same:
create the nvd compat link.
Summary:
Radix on AIM, and all of Book-E (currently), can do direct addressing of
user space, instead of needing to map user addresses into kernel space.
Take advantage of this to optimize the copy(9) functions for this
behavior, and avoid effectively NOP translations.
Test Plan: Tested on powerpcspe, powerpc64/booke, powerpc64/AIM
Reviewed by: bdragon
Differential Revision: https://reviews.freebsd.org/D25129
Summary:
The point of this addition is to cache CPU behavior 'features', to avoid
having to recompute based on CPU, etc.
The first such use case is to avoid the unnecessary manipulation of the
SLBs (Segment Lookaside Buffers) when using the Radix pmap on POWER9.
Since we already get the PCPU pointer wherever we swap the SLB entries,
we can use a cached flag to check if it's necessary to perform the
operation anyway, and skip it when not.
Reviewed by: bdragon
Differential Revision: https://reviews.freebsd.org/D24908
Instead, just skip marking pages valid if the read fails. Future
attempts to access such pages will notice that they are not marked valid
and try to read them from disk again.
Reviewed by: kib, markj
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D25138
Without this patch, if a SIGHUP is handled while the process is executing
get_exportlist(), that SIGHUP is essentially ignored because the got_sighup
variable is reset to 0 after get_exportlist().
This results in the exports file(s) not being reloaded until another SIGHUP
signal is sent to mountd.
This patch fixes this by resetting got_sighup to zero before the
get_exportlist() call while SIGHUP is blocked.
It also defines a delay time of 250msec before doing another exports reload
if there are RPC request(s) to process. This prevents repeated exports reloads
from delaying handling of RPC requests significantly.
PR: 246597
Reported by: patrykkotlowski@gmail.com
Tested by: patrykkotlowski@gmail.com
Reviewed by: markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25127
Comparing the object files produced by GNU as 2.17.50 and Clang IAS
shows many immaterial changes in strtab etc., and one material change
in .text:
1bac: 4c 8b 4f 18 mov 0x18(%rdi),%r9
1bb0: eb 0e jmp 1bc0 <Skein1024_block_loop>
- 1bb2: 66 66 2e 0f 1f 84 00 data16 nopw %cs:0x0(%rax,%rax,1)
- 1bb9: 00 00 00 00
- 1bbd: 0f 1f 00 nopl (%rax)
+ 1bb2: 66 2e 0f 1f 84 00 00 nopw %cs:0x0(%rax,%rax,1)
+ 1bb9: 00 00 00
+ 1bbc: 0f 1f 40 00 nopl 0x0(%rax)
0000000000001bc0 <Skein1024_block_loop>:
Skein1024_block_loop():
1bc0: 4c 8b 47 10 mov 0x10(%rdi),%r8
1bc4: 4c 03 85 c0 00 00 00 add 0xc0(%rbp),%r8
That is, GNU as and Clang's integrated assembler use different multi-
byte NOPs for alignment (GNU as emits an 11 byte NOP + a 3 byte NOP,
while Clang IAS emits a 10 byte NOP + a 4 byte NOP).
Dependency cleanup hacks are not required, because we do not create
.depend files from GNU as.
Reviewed by: allanjude, arichardson, cem, tsoome
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8434
r359473 removed the page unbusy logic from sendfile_iodone() because when
vm_pager_get_pages_async() would return an error after failing to start
the async I/O (eg. because VOP_BMAP failed), sendfile_swapin() would also
unbusy the pages, and it was wrong to unbusy twice. However this breaks
the case where vm_pager_get_pages_async() succeeds in starting an async I/O
and the async I/O is what fails. In this case, sendfile_iodone() must
unbusy the pages, and because sendfile_iodone() doesn't know which case
it is in, sendfile_iodone() must always unbusy pages and relookup pages
which have been substituted with bogus_page, which in turn means that
sendfile_swapin() must never do unbusy or relookup for pages which have
been given to vm_pager_get_pages_async(), even if there is an error.
Reviewed by: kib, markj
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D25136
r360979 erroneously assumed that the lowest mapping in an address space
would be a file mapping, but of course this is not true in general.
Reported and tested by: Frederic Chardon <chardon.frederic@gmail.com>
MFC after: 3 days
Clang IAS does not support the --defsym argument, and
.ifndef SKEIN_USE_ASM
gets turned into
.ifndef 1792
by the preprocessor, which results in
error: expected identifier after '.ifdef'
.ifndef 1792
^
Use #ifdef instead, which still works with GNU as.
Reviewed by: cem
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25154
vfs.zfs.boot.primary_pool is only set on BIOS boot, use vfs.root.mountfrom
instead and update all vdevs on pool.
Reviewed by: allanjude
Sponsored by: Netflix, Klara Inc.
Differential Revision: https://reviews.freebsd.org/D25103
For synthetic aliases (just pseudonyms inferred from metadata like GPT or
UFS labels, GPT UUIDs, etc), use the GEOM provider aliasing system to create
a symlink to the real device instead of creating an independent device.
This makes it more clear which labels and devices correspond, and we can
safely have multiple labels to a single device accessed at once.
The confusingly named geom_label on-disk construct continues to behave
identically to how it did before.
This requires teaching GEOM's provider aliasing about the possibility
that aliases might be added later in time, and GEOM's devfs interaction
layer not to worry about existing aliases during retaste.
Discussed with: imp
Relnotes: sure, if we don't end up reverting it
Differential Revision: https://reviews.freebsd.org/D24968
