Keep old CPUTYPEs around for compatibility. Also include
a list of typical values for FreeBSD.
# Split out from other changes in D4155
Differential Revision: https://reviews.freebsd.org/D4155
has not ran yet.
This fixes building objects directly, or skipping 'make depend', not generating
required headers first. This case did work without FAST_DEPEND so there's no
reason it should not work here as well.
An example of this can be seen building in gnu/usr.bin/binutils/libbfd
without running 'make depend' first to generate config.h.
Sponsored by: EMC / Isilon Storage Division
MFC after: 3 weeks
X-MFC-With: r290433
Analogously to r291040, in6_mc_get recurses on if_addr_lock if the
M_NOWAIT allocation fails. The fix is the same.
Suggested by: Andrey V. Elsukov
Reviewed by: jhb (ip4 version)
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D4138 (ip4 version)
When the M_NOWAIT allocation fails, we recurse the if_addr_lock trying
to clean up. Reorder the cleanup after dropping the if_addr_lock. The
obvious race is already possible between if_addmulti and IF_ADDR_WLOCK
above, so it must be ok.
Submitted by: Ryan Libby <rlibby@gmail.com>
Reviewed by: jhb
Found with: M_NOWAIT failure injection testing
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D4138
trying to do a mount. Given the backtrace,
it appears that the crash occurred when smb_vc_create() failed and then
called smb_vc_put() with vcp->vc_iod == NULL. smb_vc_put() subsequently
called smb_vc_disconnect() with vcp->vc_iod == NULL, causing the crash.
This patch adds a check for vcp->vc_iod != NULL in smb_vc_disconnect() to
avoid the crash. It also fixes the case in smb_vc_create() where
kproc_create() fails so that it destroys the mutexes and sets
vcp->vc_iod == NULL before free()'ing the iod structure.
The person who reported the PR tested the patch, but was not able
to reproduce the crash with or without the patch.
PR: 201912
Reviewed by: jhb
MFC after: 2 weeks
Discard the unused rx_free_q. Instead, reuse inputed packets by putting
them back on the *pend* queue after reinitialization.
If tx or rx handlers are unavailable, free mbufs rather than leaking
them.
With this change, if_ntb can receive more than 100
(NTB_QP_DEF_NUM_ENTRIES) packets.
Sponsored by: EMC / Isilon Storage Division
32-bit BARs can only address memory mapped in the low 32 bits of
physical RAM. Expose this as a 'plimit' out parameter from
ntb_mw_get_range().
Fix if_ntb to allocate memory within this limit.
Sponsored by: EMC / Isilon Storage Division
Sometimes they'll read spurious values (observed: 0xc on Broadwell-DE),
failing link negotiation.
Discussed with: Dave Jiang, Allen Hubbe
Sponsored by: EMC / Isilon Storage Division
The tunable 'hw.ntb.enable_writecombine' may be set to zero to
administratively disable write combining the mapped NTB region.
Sponsored by: EMC / Isilon Storage Division
Use bus_space_write instead of (non-volatile) C pointer writes via an
iowrite32() shim in the same places as the Dual BSD/GPL Linux driver.
Update some types to fixed 32-bit sizes.
Sponsored by: EMC / Isilon Storage Division
The _SKIP_BUILD is used while computing DIRDEPS. If MACHINE=host is passed in
then this logic was replacing 'MACHINE' with a literal value of the host arch,
which then caused the dirdeps graph to be wrong since it no longer had the
literal 'host' for any of include's dependencies.
This is a NOP currently since include/ is not usually built with MACHINE=host.
Sponsored by: EMC / Isilon Storage Division
The bootstrap-tools are supposed to be host tools, which in most cases, use
host headers and libraries. As such, directly including the src tree's headers
for libmd here causes the need to link libmd in since it will be built with
the new symbols (which /usr/lib/libmd.so) won't have unless it is new enough.
During the target build in buildworld the target headers are staged into
WORLDTMP and used via --sysroot, allowing the target xinstall to be built with
the new/target libmd.
The .PATH here was also not doing anything since xinstall does not use libmd
source files.
Sponsored by: EMC / Isilon Storage Division
MFC after: 2 weeks
Current Xen resume code clears all pending bitmap IPIs on resume, which is
not correct. Instead re-inject bitmap IPI vectors on resume to all CPUs in
order to acknowledge any pending bitmap IPIs.
Sponsored by: Citrix Systems R&D
MFC after: 2 weeks
All event channels are torn down when performing a migration on Xen, make
sure all handlers are also removed and the event channel structure is
properly disposed so it can be reused.
Sponsored by: Citrix Systems R&D
MFC after: 2 weeks
This is needed so interrupt handlers can be removed while the PIC is
resuming, it was previously not possible due to intr_resume holding the
intr_table_lock and intr_remove_handler recursing on it.
Sponsored by: Citrix Systems R&D
Reviewed by: kib (previous version)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D4114
branded as well as unbranded binaries. This will be required to add
support for the new ELFv2 ABI on powerpc64, which is distinguished from
ELFv1 by the contents of the ELF header's flags field.
Reviewed by: imp
MFC after: 2 weeks
Drivers can request DMA to buffers that are not in memory represented
in the vm page arrays. Because of this, store KVA of already mapped
buffer to synclist and use it in dma_dcache_sync().
Reviewed by: jah
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D4120
pmcstat(8) contains an option to output sampling data in a gmon format
compatible with gprof(1). Currently, it uses the default histcounter,
which is an (unsigned short). With large sets of sampling data, it
is possible to overflow the maximum value provided by an (unsigned
short).
This change adds the -e argument to pmcstat. If -e and -g are both
specified, pmcstat will use a histcounter type of uint64_t.
Differential Revision: https://reviews.freebsd.org/D4151
Reviewed by: jhb, bjk
Approved by: gnn (mentor)
MFC after: 1 month
Sponsored by: Juniper Networks
They are emitting characters which are triggering
a kyua bug which causes kyua to emit invalid XML.
This invalid XML is causing false failures in Jenkins.
On a separate note, kyua needs to be fixed with this:
https://github.com/jmmv/kyua/pull/148
or something similar.
Modern cards in most cases operate abstract port handles, that have no
any relation to real loop IDs. Leave loopid used only where it really
goes about local loop IDs.
While there, fix few more cases where LUNs were still printed in decimal.
for the AP143.
Wifi doesn't work on the QCA9533 board, but basic ethernet/ethernet
and ethernet switch support does work.
The AP143 has 32MB RAM and 4MB flash, so this was tested with a USB
rootfs.
Tested:
* QCA9533v2, AP143 reference design board.
It turns out on a 16550 w/ a 25MHz SoC reference clock you get a little
over 3% error at 115200 baud, which causes this to fail.
Just .. cope. Things cope these days.
Default to 30 (3.0%) as before, but allow UART_DEV_TOLERANCE_PCT to be
set at build time to change that.
QorIQ SoCs (e5500 core, P5 family) have 2 BARs for local access windows, while
MPC85XX, and P1/P2 families use only a single BAR register.
This also adds the QORIQ_DPAA option, mutually exclusive to MPC85XX, to handle
this difference.
Obtained from: Semihalf
Sponsored by: Alex Perez/Inertial Computing
Small $25 IoT device, 400mhz Atheros cpu, Atheros WiFi and Ethernet
18 GPIOs, and support for Relay, Servo, and OLED expansion
https://onion.io/omega/
Reviewed by: adrian
Approved by: bapt (mentor)
Relnotes: yes
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D4188
Setting the dumpdev via env e.g. loader.conf provides the ability to
configure the kernel dump device during early boot. When using this
g_io_getattr was returning EPERM due to cp->acr == 0.
Fix this by calling g_access to ensure we're a read consumer prior
to calling g_dev_setdumpdev.
MFC after: 2 weeks
Sponsored by: Multiplay
