This was previously working by accident because BUSDMA_COHERENT_MEMORY has
always been set to strongly-ordered on arm. Now we're moving towards
normal-uncacheable (what might be called write-combining on other platforms)
and using the proper sync ops will be more important. Of course, that
opens the question of just what is the "proper" sync op for shared
concurrent dma access as opposed to accesses where the handoff of control
of the memory has well-defined sequence points that match the available
busdma sync operations.
ath kernel module:
sys/dev/ath/ath_hal/ar5212/ar5212_reset.c:2642:7: error: taking the absolute value of unsigned type 'unsigned int' has no effect [-Werror,-Wabsolute-value]
if (abs(lp[0] * EEP_SCALE - target) < EEP_DELTA) {
^
sys/dev/ath/ah_osdep.h:74:18: note: expanded from macro 'abs'
#define abs(_a) __builtin_abs(_a)
^
sys/dev/ath/ath_hal/ar5212/ar5212_reset.c:2642:7: note: remove the call to '__builtin_abs' since unsigned values cannot be negative
sys/dev/ath/ah_osdep.h:74:18: note: expanded from macro 'abs'
#define abs(_a) __builtin_abs(_a)
^
1 error generated.
This warning occurs because both lp[0] and target are unsigned, so the
subtraction expression is also unsigned, and calling abs() is a no-op.
However, the intention was to look at the absolute difference between
the two unsigned quantities. Introduce a small static function to
clarify what we're doing, and call that instead.
Reviewed by: adrian
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D1212
isochronous endpoint descriptor used for the data transfers, hence the
synchronization feature might not be supposed to be supported [yet].
This makes seamless playback synced with the USB HOST clock work with
the DN32-USB module for Midas audio systems and possibly other similar
products from Klark Teknik.
MFC after: 1 week
SAF1761 OTG driver. Currently the driver logic is very simple and
double buffering the USB transactions is not done. Also you need to
use an external USB high speed USB HUB for reliable FULL speed
outgoing ISOCHRONOUS traffic, because the internal one chokes on
so-called split transfers above 188 bytes.
establishing connection.
This is a workaround for Chelsio TOE driver, that does not update socket
buffer size in hardware after connection established, and unless that is
done beforehand, kernel code will stuck, attempting to send/receive full
PDU at once.
MFC after: 1 week
I've missed that iscsi_outstanding_remove() frees the second pointer,
so it should no longer be used. And in fact we don't really need to.
MFC after: 2 weeks
During heavy reads data copying in icl_pdu_get_data() may consume large
percent of CPU time. Moving it out of the lock significantly reduces
lock hold time and respectively lock congestion on read operations.
MFC after: 2 weeks
commit 6d3c4c09226ad6bdd662e3e52489ef294a6ce298
Add terasic_mtl vt(4) framebuffer driver
terasic_mtl can be built with syscons(4) and vt(4) attachments, selected
at compile time.
commit 33240259b47a7c990a5a88a19f133a5600432a4c
Clear terasic_mtl text buffer on attach
commit d188c2d2412953f949624aa35cd07082830943c9
Update terasic vt(4) driver for FreeBSD r269783
commit d1cc54eee852fa4fc9d359d5bb2171d24ec73369
Safety belt to ensure vt(4) fb parameters are correct
commit 76e6d468ef45711d7952786095fc4791289ebb4b
Improve terasic_mtl_vt fdt parsing
- Use OF_getencprop to avoid need for explicit endian handling
(submitted by ray@freebsd.org)
- Check for expected length and correct pointer type
commit 3e2524b8995ab66e8a9295e4c87cbc7126eeddf4
Correct device_printf usage
commit 9e53e3c8e0766414e25662c95b09cc51c92443b0
Switch framebuffer to match host endianness
Xorg and xf86-video-scfb work much better with a native-endian
framebuffer.
commit 0f49259d596321ed85288ac0e1fb4ee1c966df48
Switch DE4 to vt(4) and enable kbdmux
commit 5bc96ebc89db7d134ad478335090c8477c1677c7
Add missing \n in device_printf calls
Submitted by: emaste
Sponsored by: DARPA, AFRL
commit d0c7d235c09fc65dbdb278e7016a96f79c6a49cc
Make the Altera JTAG UART device driver slightly more forgiving of
the foibles of a sub-par hrdware interface by increasing the timeout
for spotting JTAG polling from one to two seconds.
commit 19ed45a18832560dab967c179d83b71081c3a220
Update comment.
commit 8edfe803f033cc8e33229f99894c2b7496a44d5f
Add a comment about a device-driver race condition that could cause the BERI
pipeline to wedge awaiting JTAG in the event that both the low-level console
and the tty layer decide to write to the JTAG FIFO just before JTAG is
disconnected. Resolving this race is a bit tricky as it looks like there
isn't a way to 'give the character back' to the tty layer when we discover
the race. The easy fix is to drop the character, which we don't yet do, but
perhaps should as that is a better outcome than wedging the pipeline.
commit 2ea26cf579c9defcf31e413e7c9b0fbc159237fc
Add a comment about an inherent race with hardware in the Altera JTAG
UART's low-level console code.
Submitted by: rwatson
MFC after: 1 week
Sponsored by: DARPA, AFRL
Previously, any timeout value for which (timeout * hz) will overflow the
signed integer, will give weird results, since callout(9) routines will
convert negative values of ticks to '1'. For unsigned integer overflow we
will get sufficiently smaller timeout values than expected.
Switch from callout_reset, which requires conversion to int based ticks
to callout_reset_sbt to avoid this.
Also correct isci to correctly resolve ccb timeout.
This was based on the original work done by Eygene Ryabinkin
<rea@freebsd.org> back in 5 Aug 2011 which used a macro to help avoid
the overlow.
Differential Revision: https://reviews.freebsd.org/D1157
Reviewed by: mav, davide
MFC after: 1 month
Sponsored by: Multiplay
related cleanups:
- Require each driver to initalize a mutex in the scsi_low_softc that
is shared with the scsi_low code. This mutex is used for CAM SIMs,
timers, and interrupt handlers.
- Replace the osdep function switch with direct calls to the relevant
CAM functions and direct manipulation of timers via callout(9).
- Collapse the CAM-specific scsi_low_osdep_interface substructure
directly into scsi_low_softc.
- Use bus_*() instead of bus_space_*().
- Return BUS_PROBE_DEFAULT from probe routines instead of 0.
- No need to zero softcs.
- Pass 0ul and ~0ul instead of 0 and ~0 to bus_alloc_resource().
- Spell "dettach" as "detach".
- Remove unused 'dvname' variables.
- De-spl().
Tested by: no one
- Don't recurse driver mutex.
- Don't hold driver mutex across fubyte/subyte.
- Replace fubyte/subyte loops with copyin/copyout calls.
- Use relatively sane locking in wl_ioctl().
- Use bus space accessors instead of in*()/out*().
- Use callout(9) instead of timeout(9).
- Stop watchdog timer in detach and don't hold mutex across
bus_teardown_intr().
- Use device_printf() and if_printf().
- De-spl().
Tested by: no one
node. Take this in to account by searching until we find the range for the
root node.
Differential Revision: https://reviews.freebsd.org/D1160
Reviewed by: ian
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
- Add per-softc mutex.
- Use mutex for CAM SIM lock.
- Use bus_*() instead of inb() and outb().
- Use bus_alloc_resource_any() when reasonable.
Tested by: no one
- Actually use existing per-softc mutex.
- Use mutex in cdev routines and remove D_NEEDGIANT.
- Use callout(9) instead of timeout(9).
- Don't check for impossible conditions (e.g. SCDINIT being clear).
- Use bus_*() instead of bus_space_*().
Tested by: no one
- Add a per-softc mutex.
- Use mutex as CAM sim lock.
- Use taskqueue_thread instead of taskqueue_swi_giant.
- Use callout(9) instead of timeout(9).
- Use bus_*() instead of bus_space_*().
Tested by: no one
- Actually use existing per-softc mutex.
- Use mutex in cdev routines and remove D_NEEDGIANT.
- Use callout(9) instead of timeout(9).
- Don't check for impossible conditions (e.g. MCDINIT being clear).
- Remove critical_enter/exit when sending a PIO command.
- Use bus_*() instead of bus_space_*().
Tested by: no one
The current support for controlling i2c bus speed is an inconsistant mess.
There are 4 symbolic speed values defined, UNKNOWN, SLOW, FAST, FASTEST.
It seems to be universally assumed that SLOW means the standard 100KHz
rate from the original spec. Nothing ever calls iicbus_reset() with a
speed of FAST, although some drivers would treat it as the 400KHz standard
speed. Mostly iicbus_reset() is called with the speed set to UNKNOWN or
FASTEST, and there's really no telling what any individual driver will do
with those.
The speed of an i2c bus is limited by the speed of the slowest device on
the bus. This means that generally the bus speed needs to be configured
based on the board/system and the components within it. Historically for
i2c we've configured with device hints. Newer systems use FDT data and it
documents a clock-frequency property for i2c busses. Hobbyists and
developers are likely to want on the fly changes. These changes provide
all 3 methods, but do not require any existing drivers to change to use
the new facilities.
This adds an iicbus method, iicbus_get_frequency(dev, speed) that gets the
frequency for the requested symbolic speed. If the symbolic speed is SLOW
or if there is no speed configured for the bus, the returned value is
100KHz, always. Otherwise, if bus speed is configured by hints, fdt,
tunable, or sysctl, that speed is returned. It also adds a helper
function, iicbus_init_frequency() that any bus driver subclassed from
iicbus can initialize the frequency from some other source of info.
Initial driver implementations are provided for Freescale and TI.
Differential Revision: https://reviews.freebsd.org/D1174
PR: 195009
This is the general support to allow the use of GPIO pins as interrupt
sources for direct gpiobus children.
The use of GPIO pins as generic interrupt sources (for an ethernet driver
for example) will only be possible when arm/intrng is complete. Then, most
of this code will need to be rewritten, but it works for now, is better
than what we have and will allow further developments.
Tested on: ar71xx (RSPRO), am335x (BBB), bcm2835 (Raspberry pi)
Differential Revision: https://reviews.freebsd.org/D999
Reviewed by: rpaulo
Due to adapter->hw.fc.requested_mode is filled with default value
after ixgbe_initialize_receive_units(), this leads to enabling
DROP_EN in most cases.
Tested by: ae
MFC after: 1 week
Like in r259717, the prority goes from "error" to "debug" to avoid
spamming logs when the connectors are polled.
PR: 194770
Submitted by: Larry Rosenman <ler@lerctr.org>
MFC after: 1 week
I did this wrong - I should've included a state flag for each callout
to see if it was supposed to run or not. I didn't do that.
Instead, just use mutexes anyway.
Suggested by: jhb
