The values of the d_slice and d_partition fields of a disk_devdesc have a
few values with special meanings in the disk_open() routine. Through various
evolutions of the loader code over time, a d_partition value of -1 has
meant both "use the first ufs partition found in the bsd label" and "don't
open a bsd partition at all, open the raw slice."
This defines a new special value of -2 to mean open the raw slice, and it
gives symbolic names to all the special values used in d_slice and
d_partition, and adjusts all existing uses of those fields to use the new
constants.
The phab review for this timed out without being accepted, but I'm still
citing it below because there is useful commentary there.
Differential Revision: https://reviews.freebsd.org/D19262
There are only 19 bytes available for the name of an interrupt plus the
name(s) of handlers/drivers using it. There is a mechanism from the days of
shared interrupts that replaces some of the handler names with '+' when they
don't all fit into 19 bytes.
In modern times there is typically only one device on an interrupt, but long
device names are the norm, especially with embedded systems. Also, in systems
with multiple interrupt controllers, the names of the interrupts themselves
can be long. For example, 'gic0,s54: imx6_anatop0' doesn't fit, and
replacing the device driver name with a '+' provides no useful info at all.
When there is only one handler but its name was too long to fit, this
change truncates enough leading chars of the handler name (replacing them
with a '-' char to indicate that some chars are missing) to use all 19
bytes, preserving the unit number typically on the end of the name. Using
the prior example, this results in: 'gic0,s54:-6_anatop0' which provides
plenty of info to figure out which device is involved.
PR: 211946
Reviewed by: gonzo@ (prior version without the '-' char)
Differential Revision: https://reviews.freebsd.org/D19675
args (neither MAP_PRIVATE nor MAP_SHARED). It was broken in r271635
and/or r271724 by stricter checking. The compatibility code in r271724
doesn't work for my old binaries (actually new binaries with old
libraries).
PR: needed to test the fix for PR 162373
For 32-bit Linuxulator, ipc() syscall was historically
the entry point for the IPC API. Starting in Linux 4.18, direct
syscalls are provided for the IPC. Enable it.
MFC after: 1 month
AMD64_SET_**BASE expects a pointer to a pointer, we just passing in the pointer value itself.
Set PCB_FULL_IRET for doreti to restore %fs, %gs and its correspondig base.
PR: 225105
Reported by: trasz@
MFC after: 1 month
SCTP_SENDALL flag. Allow also only one operation per SCTP endpoint.
This fixes an issue found by running syzkaller and is joint work with rrs@.
MFC after: 1 week
r343532 noted the difference between "hw.realmem" and "hw.physmem", which I
was previously unaware of. I discovered that neither sysctl had a
description visible via `sysctl -d', so I found where they were defined and
added suitable descriptions. While in the file, I went ahead and added
descriptions for all the others which lacked them. I also updated sysctl.3
accordingly
Reviewed by: kib, bcr
MFC after: 1 weeks
Sponsored by: Panasas
Differential Revision: https://reviews.freebsd.org/D19007
Otherwise resulting address from vm_map_find() migh not satisfy the
upper limit. For instance, it could affect MAP_32BIT flag from 64bit
processes.
Found by: Doug Moore <dougm@rice.edu>
Reviewed by: alc, Doug Moore <dougm@rice.edu>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D19688
modules by declaring corresponding variables in rc.conf. Also document
them in rc.conf(5).
Submitted by: Dries Michiels
Differential Revision: https://reviews.freebsd.org/D19673
[ARM] Don't form "ands" when it isn't scheduled correctly.
In r322972/r323136, the iteration here was changed to catch cases at
the beginning of a basic block... but we accidentally deleted an
important safety check. Restore that check to the way it was.
Fixes https://bugs.llvm.org/show_bug.cgi?id=41116
Differential Revision: https://reviews.llvm.org/D59680
This should fix "Assertion failed: (LiveCPSR && "CPSR liveness tracking
is wrong!"), function UpdateCPSRUse" errors when building the devel/xwpe
port for armv7.
PR: 236062, 236568
MFC after: 1 month
X-MFC-With: r344779
TPM has a built-in RNG, with its own entropy source.
The driver was extended to harvest 16 random bytes from TPM every 10 seconds.
A new build option "TPM_HARVEST" was introduced - for now, however, it
is not enabled by default in the GENERIC config.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: markm, delphij
Approved by: secteam
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D19620
Attempting to build www/firefox on POWER9 resulted in a HMI exception being
thrown, a fatal trap currently. This is typically caused by timer facility
errors, but examination of the Hypervisor Maintenance Exception Register
(HMER) yielded only that an exception had recovered, with no information of
the actual exception cause.
When an HMI occurs, OPAL_HANDLE_HMI or OPAL_HANDLE_HMI2 must be called to
handle the exception at the firmware level. If the exception is handled, we
can continue.
This adds only the preliminary handler, enough to prevent package building
from panicking. An enhancement in the future is to use the flags returned
by OPAL_HANDLE_HMI2 to print more useful error messages, and log maintenance
events.
Reviewed by: luporl
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D19634
After latest binding update, this patch enables usage of
the switch on Armada 3720 EspressoBin, so compile it
by default with arm64 GENERIC.
A patch was extracted from https://reviews.freebsd.org/D19036
Submitted by: Bert JW Regeer <xistence@0x58.com>
Reviewed by: manu
In the latest Linux kernel revisions the DSA (Distributed
Switch Architecture) device tree binding was changed.
Instead of the top level dsa@ node, the switch and its
ports is represented as a child node of the mdio bus.
With that other modifications were added, such as
relation with the ethernet port of the SoC. Adjust
e6000sw etherswitch and mvneta drivers to that.
Tested on Armada 3720 EspressoBin and Armada 388 Clearfog Pro boards.
Submitted by: Bert JW Regeer <xistence@0x58.com>
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D19036
If we returning 32 bits value it's hard to distinguish if the returned value
is a valid one or if its an error (in case of EOF). For that reason separate
exit code of the function from the returned character.
Reported by: cem, se
r345402 fixed the bug that led to the split of the ISA 3.0 HPT handling from
the existing manager. The cause of the bug was gcc moving the register
holding VPN to a different register (not r0), which triggered bizarre
behaviors. With the fix, things work, so they can be re-merged. No
performance lost with the merge.
I overlooked the fact that that VOP_FSYNC() call is not a FreeBSD VFS
call, but a macro that provides an illumos-compatible wrapper for the
FreeBSD operation.
PR: 236475
Reported by: lwhsu
Pointyhat to: avg
PIIX4_SMBHSTSTAT_ERR can be set for several reasons that, unfortunately,
cannot be distinguished, but the most typical case is a missing or hung
slave (SMB_ENOACK).
PIIX4_SMBHSTSTAT_FAIL means failed or killed / aborted transaction, so
it's previous mapping to SMB_ENOACK was not ideal.
After this change an smb(4) access to a missing slave results in ENXIO
rather than EIO. To me, that seems to be more appropriate.
MFC after: 3 weeks
This module provides support for the Amazon Elastic Network Adapter; it
was previously only built on x86 architectures, but Amazon EC2 now also
has ARM64 instances with this hardware.
Submitted by: Greg V
This value was being used uninitialized, resulting in predictable issues
on systems with memory-mapped UART registers.
A case could be made that memmap_bus should be declared in a header
rather than being declared in each .c file which needs to refer to it,
but that's a broader style question.
This commit unbreaks hw.uart.console="mm:..." on ARM64.
Submitted by: Greg V
The "access width" value was hard-coded as 2, indicating 32-bit accesses;
instead, use the value specified in the SPCR table.
This unbreaks the console on EC2 "A1" family instances.
Submitted by: Greg V
By happenstance gcc4 puts 'vpn' into r0 in all uses of TLBIE(), but modern
gcc does not. Also, the single-argument form of tlbie zeros all unused
arguments, making the modern tlbie instruction use r0 as the RS field
(LPID).
The vpn argument has the bottom 12 bits cleared (the input having been
left-shifted by 12 bits), which just so happens, on the POWER9 and previous
incarnations, to be the number of LPID bits supported. With those bits
being zero, the instruction:
tlbie r0, r0
will invalidate the VPN in r0, in LPAR 0 (ignoring the upper bits of r0 for
the RS field). One build with gcc8 yields:
tlbie r9, r0
with r0 having arbitrary contents, not equal to r9. This leads to strange
crashes, behaviors, and panics, due to the requested TLB entry not actually
being invalidated.
As the moea64_native must work on both old and new, we explicitly zero out
r0 so that it can work with only the single argument, built with base gcc
and modern gcc. isa3_hashtb takes a different approach, encoding the
two-argument form, soas not to explicitly clobber r0, and instead let the
compiler decide.
Reported by: Brandon Bergren
Tested by: Brandon Bergren
MFC after: 1 week
