Commit Graph

254774 Commits

Author SHA1 Message Date
Mateusz Piotrowski
16e1abe4e0 libprocstat.3: Correct two occurrences of kvm_getprocs to procstat_getprocs
Submitted by:	otis_sk.freebsd.org
Reviewed by:	markj
MFC after:	3 days
Differential Revision:	https://reviews.freebsd.org/D26151
2020-11-26 22:49:05 +00:00
Konstantin Belousov
1a1b8b1cb3 Remove stray column.
Sponsored by:	The FreeBSD Foundation
MFC after: 3 days
2020-11-26 20:27:23 +00:00
Konstantin Belousov
20b8e1a25c Style.
Sponsored by:	The FreeBSD Foundation
MFC after: 3 days
2020-11-26 20:23:17 +00:00
Emmanuel Vadot
df15910266 arm64: Do not rely on SPCR table to detect acpi
Since EDK2 commit d8e36289cef7bde628b023219cd65fa8e8d4562a, the Graphical console may
completely hide SPCR, causing panics later when locating timers.
As such simply rely on the ACPI Root pointer presence.

Submitted by:	dan.kotowski@a9development.com
Reviewed by:	andrew, mw
Differential Revision:	https://reviews.freebsd.org/D27306
2020-11-26 20:22:34 +00:00
Stefan Eßer
891bc22d39 Update Makefile for new version 3.2.0 2020-11-26 19:38:02 +00:00
Alexander Motin
b760d2eca9 More cleanup in response queue and reset code. 2020-11-26 18:47:23 +00:00
Alan Somers
d262451715 ping: add a ping6 hard link for backwards compatibility
When invoked as "ping6", ping will now attempt to use ICMPv6 for hostnames
that resolve both IPv4 and IPv6 addresses.

Reviewed by:	bz, manu
MFC-With:	r368045
Differential Revision:	https://reviews.freebsd.org/D27384
2020-11-26 18:33:04 +00:00
Konstantin Belousov
f7af6e5e54 nullfs: provide custom bypass for VOP_READ_PGCACHE().
Normal bypass expects locked vnode, which is not true for
VOP_READ_PGCACHE().  Ensure liveness of the lower vnode by taking the
upper vnode interlock, which is also taked by null_reclaim() when
setting v_data to NULL.

Reported and tested by:	pho
Reviewed by:	markj, mjg
Sponsored by:	The FreeBSD Foundation
Differential revision:	https://reviews.freebsd.org/D27327
2020-11-26 18:16:32 +00:00
Konstantin Belousov
99c66d3acf vn_read_from_obj(): fix handling of doomed vnodes.
There is no reason why vp->v_object cannot be NULL. If it is, it's
fine, handle it by delegating to VOP_READ().

Tested by:	pho
Reviewed by:	markj, mjg
Sponsored by:	The FreeBSD Foundation
Differential revision:	https://reviews.freebsd.org/D27327
2020-11-26 18:13:33 +00:00
Konstantin Belousov
164438a7b9 More careful handling of the mount failure.
- VFS_UNMOUNT() requires vn_start_write() around it [*].
- call VFS_PURGE() before unmount.
- do not destroy mp if cleanup unmount did not succeed.
- set MNTK_UNMOUNT, and indicate forced unmount with MNTK_UNMOUNTF
  for VFS_UNMOUNT() in cleanup.

PR:	251320 [*]
Reported by:	Tong Zhang <ztong0001@gmail.com>
Reviewed by:	markj, mjg
Discussed with:	rmacklem
Sponsored by:	The FreeBSD Foundation
Differential revision:	https://reviews.freebsd.org/D27327
2020-11-26 18:08:42 +00:00
Konstantin Belousov
92bcefd1d2 clear_inodedeps: handle ERELOOKUP from ffs_syncvnode().
Reported and tested by:	pho
Sponsored by:	The FreeBSD Foundation
2020-11-26 18:03:24 +00:00
Konstantin Belousov
3b1f974bfb Make max ticks for pause in vn_lock_pair() adjustable at runtime.
Reduce default value from hz / 10 to hz / 100.

Reviewed by:	markj
Tested by:	pho
Sponsored by:	The FreeBSD Foundation
2020-11-26 18:00:26 +00:00
Stefan Eßer
50696a6e8c Update to version 3.2.0 2020-11-26 17:39:51 +00:00
Alex Richardson
dabbf11f97 bsd.lib.mk: Work around build system raciness
We are seeing regular build failures due to libc.so being installed again and
another parallel make job tries to read the partially written libc.so at the
same time. When building with -j32 or higher this almost always happens on
the first clean build (subsequent incremental builds always work fine).
Using -S should "fix" the "section header table goes past the end of the
file: e_shoff = 0x..." errors that have started to plague our builds.

We originally thought this only affected CheriBSD, but I just got the same
error while building the latest upstream FreeBSD.

The real fix should be to not install libraries twice, but until then this
workaround is needed.

Original patch by jrtc27@, I only made some minor changes to the comment.

Obtained from: CheriBSD (49837edd3e)
Reviewed By:	markj, bdrewery
Differential Revision: https://reviews.freebsd.org/D27102
2020-11-26 17:37:27 +00:00
Alex Richardson
acf8792067 Add .cfi_{start,end}proc for RISC-V assembly functions
This allows GDB to print more useful backtraces when setting a breakpoint
on an assembly function.

Reviewed By:	jhb
Differential Revision: https://reviews.freebsd.org/D27177
2020-11-26 17:37:22 +00:00
Stefan Eßer
2e4772e823 Import version 3.2.0 2020-11-26 17:27:07 +00:00
Emmanuel Vadot
978a8cccd8 arm: allwinner: a23 timer functions are only used for arm64 2020-11-26 17:19:47 +00:00
Emmanuel Vadot
e7d11d07e0 arm: tegra: Remove unused variable 2020-11-26 17:19:30 +00:00
Emmanuel Vadot
3c5e248d9d arm: mv: Remove unused code 2020-11-26 17:19:13 +00:00
Emmanuel Vadot
8704ae04f4 arm: ti: Remove unused function ti_first_gpio_bank 2020-11-26 17:18:54 +00:00
Stefan Eßer
907a6834f7 Revert incomplete import of version 3.2.0 2020-11-26 17:18:18 +00:00
Stefan Eßer
04f2650428 Update to version 3.2.0 2020-11-26 16:52:17 +00:00
Emmanuel Vadot
1a96c1434f sdhci: mmccam: Update vccq in the driver ios
Otherwise we always report that the card is running at 1.2V.
2020-11-26 16:40:39 +00:00
Emmanuel Vadot
b18f2ef413 sdhci: Only print mmccam debug code if hw.sdhci.debug is > 1 2020-11-26 16:40:20 +00:00
Emmanuel Vadot
2fe1b4ca42 mmccam: We can't sleep during sdda_add_part so use M_NOWAIT
Reviewed by:	kibab
Differential Revision:	https://reviews.freebsd.org/D25947
2020-11-26 16:39:56 +00:00
Hans Petter Selasky
05952067bb Ensure consistent error messages from ifconfig(8).
If multiple threads are invoking "ifconfig XXX create" a race may occur
which can lead to two different error messages for the same error.

a) ifconfig: SIOCIFCREATE2: File exists
b) ifconfig: interface XXX already exists

This patch ensures ifconfig prints the same error code
for the same case.

Reviewed by:	imp@ and kib@
Differential Revision:	https://reviews.freebsd.org/D27380
MFC after:	1 week
Sponsored by:	Mellanox Technologies // NVIDIA Networking
2020-11-26 16:36:50 +00:00
Ulrich Spörlein
accf961151 GH Actions: Use pre-installed clang packages
Also fix the run by setting up the environment in non-deprecated way.

Always run with --debug to understand better what sort of stuff is happening in
the background. Also split out the bmake bootstrap stage (takes about 31s on
ubuntu, but 1m14 on macOS?)

Drops the dependency on coreutils (realpath, nproc) and thus (?) fixes macOS to
be just as fast (4 logical cores vs 2 physical cores before, go figure.)

Reviewed by:		arichardson
2020-11-26 14:42:16 +00:00
Alex Richardson
371f152c7f Significantly speed up libthr/mutex_test and make more reliable
Instead of using a simple global++ as the data race, with this change we
perform the increment by loading the global, delaying for a bit and then
storing back the incremented value. If I move the increment outside of the
mutex protected range, I can now see the data race with only 100 iterations
on amd64 in almost all cases. Before this change such a racy test almost
always passed with < 100,000 iterations and only reliably failed with the
current limit of 10 million.

I noticed this poorly written test because the mutex:mutex{2,3} and
timedmutex:mutex{2,3} tests were always timing out on our CheriBSD Jenkins.
Writing good concurrency tests is hard so I won't attempt to do so, but this
change should make the test more likely to fail if pthread_mutex_lock is not
implemented correctly while also significantly reducing the time it takes to
run these four tests. It will also reduce the time it takes for QEMU RISC-V
testsuite runs by almost 40 minutes (out of currently 7 hours).

Reviewed By:	brooks, ngie
Differential Revision: https://reviews.freebsd.org/D26473
2020-11-26 13:31:57 +00:00
Pawel Biernacki
569da02b0c libsysdecode: account for invalid protection flags
Reported by:	jhb
MFC with:	r368022
2020-11-26 09:07:45 +00:00
Poul-Henning Kamp
c0c2345432 Add support for Fintek F81803 SuperIO chip
Reviewed by:	avg
2020-11-26 07:34:20 +00:00
Mateusz Guzik
b83e94be53 thread: staticize thread_reap and move td_allocdomain
thread_init is a much better fit as the the value is constant after
initialization.
2020-11-26 06:59:27 +00:00
Peter Grehan
ddfc488c36 Remove manual instruction encodings for VMLOAD, VMRUN, and VMSAVE.
This is	a relic	from when these	instructions weren't supported by the toolchain.
No functional change.

Submitted by:	adam_fenn.io
Reviewed by:	grehan
Approved by:	grehan (bhyve)
MFC after:	3 days
Differential Revision:	https://reviews.freebsd.org/D27130
2020-11-26 05:58:55 +00:00
Alan Somers
01f3f35447 ping: fix some man pages and tests after r368045
MFC-with:	r368045
2020-11-26 04:55:02 +00:00
Alan Somers
3cde9171d2 Merge ping6 to ping
There is now a single ping binary, which chooses to use ICMP or ICMPv4
based on the -4 and -6 options, and the format of the address.

Submitted by:	Ján Sučan <sucanjan@gmail.com>
Sponsored by:	Google LLC (Google Summer of Code 2019)
MFC after:	Never
Differential Revision:	https://reviews.freebsd.org/D21377
2020-11-26 04:29:30 +00:00
Alexander Motin
b05f17a12f Some minor FCoE bits I had lying around. 2020-11-26 02:14:52 +00:00
Alexander Motin
8cb0d414a8 Remove some more dead code from pre-24xx. 2020-11-26 01:59:44 +00:00
Ian Lepore
a7623790fb Add the firmware blob required to use the sdma hardware in the imx6
processor, and its associated license text (which is similar to a
bsd-3-clause, but with a prohibition against decompiling).  Install a copy
of the license in /usr/share/doc/legal/imx, to comply with the license terms
that requires a copy of the license to be delivered along with the firmware.

Obtained from:	https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/imx/sdma/sdma-imx6q.bin https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/LICENSE.sdma_firmware
2020-11-26 01:40:04 +00:00
Maxim Sobolev
fd2ef8ef5a Unobfuscate "KERNLOAD" parameter on amd64. This change lines-up amd64 with the
i386 and the rest of supported architectures by defining KERNLOAD in the
vmparam.h and getting rid of magic constant in the linker script, which albeit
documented via comment but isn't programmatically accessible at a compile time.

Use KERNLOAD to eliminate another (matching) magic constant 100 lines down
inside unremarkable TU "copy.c" 3 levels deep in the EFI loader tree.

Reviewed by:	markj
Approved by:	markj
MFC after:	1 month
Differential Revision:	https://reviews.freebsd.org/D27355
2020-11-25 23:19:01 +00:00
John Baldwin
d1e0552937 Add a manpage for kernel TLS.
This subsumes some of the content from tcp(4) describing the socket
options but also adds additional notes.

Reviewed by:	gallatin, hselasky
Sponsored by:	Chelsio Communications
Differential Revision:	https://reviews.freebsd.org/D27272
2020-11-25 23:17:23 +00:00
Mateusz Guzik
2e51c2bfd1 pipe: follow up cleanup to previous
The commited patch was incomplete.

- add back missing goto retry, noted by jhb
- 'if (error)'  -> 'if (error != 0)'
- consistently do:

if (error != 0)
    break;
continue;

instead of:

if (error != 0)
    break;
else
    continue;

This adds some 'continue' uses which are not needed, but line up with the
rest of pipe_write.
2020-11-25 22:53:21 +00:00
Mateusz Guzik
c8df8543fd pipe: drop spurious pipeunlock/pipelock cycle on write 2020-11-25 21:41:23 +00:00
Bjoern A. Zeeb
dd4d5a5ffb IPv6: set ifdisabled in the kernel rather than in rc
Enable ND6_IFF_IFDISABLED when the interface is created in the
kernel before return to user space.

This avoids a race when an interface is create by a program which
also calls ifconfig IF inet6 -ifdisabled and races with the
devd -> /etc/pccard_ether -> .. netif start IF -> ifdisabled
calls (the devd/rc framework disabling IPv6 again after the program
had enabled it already).

In case the global net.inet6.ip6.accept_rtadv was turned on,
we also default to enabling IPv6 on the interfaces, rather than
disabling them.

PR:		248172
Reported by:	Gert Doering (gert greenie.muc.de)
Reviewed by:	glebius (, phk)
MFC after:	2 weeks
Differential Revision:	https://reviews.freebsd.org/D27324
2020-11-25 20:58:01 +00:00
Ian Lepore
2814e68675 Extend the imx6 gpc->gic interrupt controller fixup of fdt data at runtime
to work with the pmu and tempmon nodes as well as the soc node.  This allows
interrupts to work on the pmu and tempmon devices even though we don't have
a driver for the low-power gpc interrupt controller (which is not a problem
because we also don't have support for entering deep power-down modes where
it gets used).
2020-11-25 20:05:05 +00:00
Ian Lepore
0ffeeb414f Convert the imx6_snvs RTC driver to access registers via the syscon device.
This is required for it to work correctly in the GENERIC kernel.
2020-11-25 19:10:20 +00:00
Ian Lepore
253dde678e Add the standard extres pseudo devices to the IMX6 kernel config.
Some imx6 drivers are being converted to use features that weren't available
when they were first written (such as accessing shared device registers via
the syscon pseudo-device), so imx6 custom kernels that reference those
devices will now need this infrastructure in place.
2020-11-25 19:08:22 +00:00
Ian Lepore
4b7ae525a8 A couple small fixes for the imx6_sdma driver...
Attach after interrupt controllers, since the attach function tries to
set up an interrupt handler.

Check for the availability of the required firmware early in the attach
code (before allocating resources).  If the firmware is not available, set
a static var to remember that, so that if the device is re-probed on later
passes it won't repeatedly try to attach and then complain again about
missing firmware.
2020-11-25 18:09:01 +00:00
Kristof Provost
bca0e1d2ac if: Fix non-VIMAGE build
if_link_ifnet() and if_unlink_ifnet() are needed even when VIMAGE is not
enabled.

MFC after:	2 weeks
Sponsored by:	Modirum MDPay
2020-11-25 17:15:24 +00:00
Konstantin Belousov
07ef907f6e ffs_softdep.c: get_parent_vp(): Fix bp lock leak when inum inode was already freed.
Reported by:	markj, pho
Tested by:	pho
Sponsored by:	The FreeBSD Foundation
MFC after:	1 week
2020-11-25 17:12:21 +00:00
Konstantin Belousov
f2148ee019 Use designated initializers for libc pthread stubs' jump table.
Sponsored by:	The FreeBSD Foundation
MFC after:	1 week
2020-11-25 17:04:26 +00:00
Pawel Biernacki
4cbec44397 libsysdecode: correctly decode mmap flags
r352913 added decoding of mmap PROT_MAX()'d flags but didn’t account for the
case where different values were specified for PROT_MAX and regular flags.
Fix it.

Submitted by:	sigsys_gmail.com
Reported by:	sigsys_gmail.com
MFC after:	7 days
Differential Revision:	https://reviews.freebsd.org/D27312
2020-11-25 16:30:57 +00:00