must first attach to the traced process. If the tracing process
exits without detaching, the traced process will be killed rather
than continued. For the duration of the tracing session, the traced
process is reparented to the tracing process (with resulting expected
behaviors). It is permissible to trace more than one other process
at a time. When using waitpid() to monitor the behavior of the traced
process, signals are intercepted: they may optionally then be
forwarded using ptrace(). Signals are generated normally by and for
the process, but also by the tracing facility (SIGTRAP).
Product of: Suffering
Sponsored by: DARPA, AFRL
to sendfile(2) being erroneously automatically restarted after a signal
is delivered. Fixed by converting ERESTART to EINTR prior to exiting.
Updated manual page to indicate the potential EINTR error, its cause
and consequences.
Approved by: re@freebsd.org
closer to reality. More work remains to be done. st_mtime should
be the most complete based on IEEE Std 1003.1, 2003 Edition, a
review of ufs_vnops.c, and some experimentation.
specified directory is not found in the mount list. Before the
MNT_BYFSID changes, unmount(2) used to return ENOENT for a nonexistent
path and EINVAL for a non-mountpoint, but we can no longer distinguish
between these cases. Of the two error codes, EINVAL was more likely
to occur in practice, and it was the only one of the two that was
documented.
Update the manual page to match the current behaviour.
Suggested by: tjr
Reviewed by: tjr
no peer address information is desired.
PR: 56044
Submitted by: Felix Opatz <felix@zotteljedi.de> and
Bernd Luevelsmeyer <bdluevel@heitec.net>
MFC after: 1 month
- All those diffs to syscalls.master for each architecture *are*
necessary. This needed clarification; the stub code generation for
mlockall() was disabled, which would prevent applications from
linking to this API (suggested by mux)
- Giant has been quoshed. It is no longer held by the code, as
the required locking has been pushed down within vm_map.c.
- Callers must specify VM_MAP_WIRE_HOLESOK or VM_MAP_WIRE_NOHOLES
to express their intention explicitly.
- Inspected at the vmstat, top and vm pager sysctl stats level.
Paging-in activity is occurring correctly, using a test harness.
- The RES size for a process may appear to be greater than its SIZE.
This is believed to be due to mappings of the same shared library
page being wired twice. Further exploration is needed.
- Believed to back out of allocations and locks correctly
(tested with WITNESS, MUTEX_PROFILING, INVARIANTS and DIAGNOSTIC).
PR: kern/43426, standards/54223
Reviewed by: jake, alc
Approved by: jake (mentor)
MFC after: 2 weeks
system by specifying the file system ID instead of a path. Use this
by default in umount(8). This avoids the need to perform any vnode
operations to look up the mount point, so it makes it possible to
unmount a file system whose root vnode cannot be looked up (e.g.
due to a dead NFS server, or a file system that has become detached
from the hierarchy because an underlying file system was unmounted).
It also provides an unambiguous way to specify which file system is
to be unmunted.
Since the ability to unmount using a path name is retained only for
compatibility, that case now just uses a simple string comparison
of the supplied path against f_mntonname of each mounted file system.
Discussed on: freebsd-arch
mdoc help from: ru
to clarify which system call accepts which arguments. Previously
the manual page gave the impression that calling unmount() with
flags of (MNT_FORCE | MNT_UPDATE | MNT_RDONLY) would downgrade a
read-write mount to read-only, which is clearly untrue; to do that,
these flags should be passed to mount() instead.
and sigsuspend(2), all three of which operate or depend on the
process signal mask.
Add a missing xref to sigsetops(3), without which the above three
syscalls would be useless.
TAI is a timescale, just like UTC. The tai field returns the offset
between the two, and isn't really used for precision time keeping.
Explain in brief what a positive and a negative leap seconds are. Add
some URLs to very useful web pages about time and time keeping for
more information on using this API.
Reviewed by: phk
or -1 on failure. The manual used to say it returned 0 or -1. Both
examination of the kernel sources, and ntpd show that this is the case.
MFC After: 3 days
that the old API (passing "" as the attribute name to the _get_
interface) is now deprecated (and was probably a bad idea).
Pointed out by: Dominic Giampaolo <dbg@apple.com>
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
Those who really need this information can find it in the include file.
* Include a succinct description of the st_birthtime field.
Approved by: re (bmah)
by allprison_mtx), a unique prison/jail identifier field, two path
fields (pr_path for reporting and pr_root vnode instance) to store
the chroot() point of each jail.
o Add jail_attach(2) to allow a process to bind to an existing jail.
o Add change_root() to perform the chroot operation on a specified
vnode.
o Generalize change_dir() to accept a vnode, and move namei() calls
to callers of change_dir().
o Add a new sysctl (security.jail.list) which is a group of
struct xprison instances that represent a snapshot of active jails.
Reviewed by: rwatson, tjr
critical and should not be killed when pageout is looking for more
memory pages in all the wrong places.
Reviewed by: arch@
Sponsored by: St. Bernard Software
The background info in this man page needs rewriting
in some parts since the last major changes
to the code, however it still accuratly reflects how to use the
API.
Only warnings that could be fixed without changing the generated object
code and without restructuring the source code have been handled.
Reviewed by: /sbin/md5
checks, including the "open directory" check or a MAC check fail,
after the working directory of the process has been changed, then
the cwd of the process will be left as the target directory rather
than the original directory.
At some point, this bug might be fixable by performing the directory
change only after permission is granted for the change. In the
mean time document it (it's been there for a while).
so that multiple opens of the same semaphore without an intervening
sem_close() return the same object, and so that sem_close() does not
segfault while trying to remove the item from the list.
Stop calling system calls "function calls".
Use "The .Fn system call" a-la "The .Nm utility".
When referring to a non-BSD implementation in
the HISTORY section, call syscall a function,
to be safe.
namely uuidgen(1), uuidgen(2) and uuid(3), the following division
has been choosen:
uuidgen(1) A description of the command line utility,
and other user oriented UUID information.
uuidgen(2) A mostly technical description of UUIDs.
uuid(3) A description of the functions and other
programmer oriented UUID information.
According to the division: add more technical contents.
Contributed by: Hiten Pandya <hiten@uk.FreeBSD.org>
Edited and enhanced: marcel
the page myself. The new language is more accurate than what was there
before, but the most accurate way of describing the funcionality eludes
me.
PR: kern/33904
MFC after: 1 month
the data value returned by kevent()'s EVFILT_READ filter on non-TCP
sockets accurately reflects the amount of data that can be read from the
sockets by applications.
PR: 30634
Reviewed by: -net, -arch
Sponsored by: NTT Multimedia Communications Labs
MFC after: 2 weeks
linking.
* Fix disorder in the SEE ALSO sections of aio_*(2).
* Remove unnecessary cross-references from the SEE ALSO sections of
aio_*(2); config(8), kldload(8) and kldunload(8) are cross-referenced
from aio(4).
* Remove the KERNEL OPTIONS sections from aio_*(2), now that these
pages cross-reference aio(4), which contains suitable kernel linking
reference material.
`sigprocmask', `sigaltstack', and `sigwait' as well as to the
prototypes of the apparantly unimplemented functions `sigtimedwait'
and `sigwaitinfo'. This complies with IEEE Std 1003.1-2001.
ceased to be useful when the number of "special processes" went from 3
to one per device. I considered replacing it with a "kernel threads"
section, but this seemed like the wrong place for that.
PR: 40969
doesn't do this, and it wouldn't be very useful if it did, since the
caller supplies us with that number.
PR: 41329
Submitted by: Michael Galassi <nerd@xyz.com>
support creation times such as UFS2) to the value of the
modification time if the value of the modification time is older
than the current creation time. See utimes(2) for further details.
Sponsored by: DARPA & NAI Labs.
file descriptors does not change upon dropping privilege, and include
a likely case of `setuid(non_superuser); exec(...);'.
Sponsored by: DARPA, NAI Labs
Obtained from: TrustedBSD Project
The uuidgen command, by means of the uuidgen syscall, generates one
or more Universally Unique Identifiers compatible with OSF/DCE 1.1
version 1 UUIDs.
From the Perforce logs (change 11995):
Round of cleanups:
o Give uuidgen() the correct prototype in syscalls.master
o Define struct uuid according to DCE 1.1 in sys/uuid.h
o Use struct uuid instead of uuid_t. The latter is defined
in sys/uuid.h but should not be used in kernel land.
o Add snprintf_uuid(), printf_uuid() and sbuf_printf_uuid()
to kern_uuid.c for use in the kernel (currently geom_gpt.c).
o Rename the non-standard struct uuid in kern/kern_uuid.c
to struct uuid_private and give it a slightly better definition
for better byte-order handling. See below.
o In sys/gpt.h, fix the broken uuid definitions to match the now
compliant struct uuid definition. See below.
o In usr.bin/uuidgen/uuidgen.c catch up with struct uuid change.
A note about byte-order:
The standard failed to provide a non-conflicting and
unambiguous definition for the binary representation. My initial
implementation always wrote the timestamp as a 64-bit little-endian
(2s-complement) integral. The clock sequence was always written
as a 16-bit big-endian (2s-complement) integral. After a good
nights sleep and couple of Pan Galactic Gargle Blasters (not
necessarily in that order :-) I reread the spec and came to the
conclusion that the time fields are always written in the native
by order, provided the the low, mid and hi chopping still occurs.
The spec mentions that you "might need to swap bytes if you talk
to a machine that has a different byte-order". The clock sequence
is always written in big-endian order (as is the IEEE 802 address)
because its division is resulting in bytes, making the ordering
unambiguous.
