Make it possible to retrieve mmc parameters via the XPT_GET_ADVINFO
call instead. Convert camcontrol to the new scheme.
Reviewed by: imp. kibab
Sponsored by: Netflix
Differential Revision: D13868
Now it is possible to use UDPLite's port numbers in rules,
create dynamic states for UDPLite packets and see "UDPLite" for matched
packets in log.
Obtained from: Yandex LLC
MFC after: 2 weeks
Sponsored by: Yandex LLC
different access rights.
By default there are two community strings with index 1 and 2, one for
read-only access and second for read-write access:
begemotSnmpdCommunityString.0.1 = $(read)
begemotSnmpdCommunityString.0.2 = $(write)
Now it is possible to define additional community strings using different
indexes:
begemotSnmpdCommunityString.0.3 = "SomeString1"
begemotSnmpdCommunityPermission.0.3 = 1
begemotSnmpdCommunityString.0.4 = "SomeString2"
begemotSnmpdCommunityPermission.0.4 = 2
begemotSnmpdCommunityString.0.5 = "SomeString3"
begemotSnmpdCommunityString.0.6 = "SomeString4"
New attribute begemotSnmpdCommunityPermission can be used to specify access
rights: 1 means "read-only" access, 2 means "read-write" access. If
attribute is not specified for some index this means "read-only" rights.
Community strings must be unique, i.e. must not be the same for different
indexes.
Obtained from: Yandex LLC
MFC after: 2 weeks
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D13785
The logical result of a right shift >= the width of a type is zero, but our
compiler decides this is a warning (and thus, error). Just remove ccp(4)
from i386.
Reported by: cy
Sponsored by: Dell EMC Isilon
Similar to NMIs, machine check exceptions can fire at any time and are
not masked by IF. This means that machine checks can fire when the
kstack is too deep to hold a trap frame, or at critical sections in
trap handlers when a user %gs is used with a kernel %cs. Use the same
strategy used for NMIs of using a dedicated per-CPU stack configured
in IST 3. Store the CPU's pcpu pointer at the stop of the stack so
that the machine check handler can reliably find the proper value for
%gs (also borrowed from NMIs).
This should also fix a similar issue with PTI with a MC# occurring
while the CPU is executing on the trampoline stack.
While here, bypass trap() entirely and just call mca_intr(). This
avoids a bogus call to kdb_reenter() (there's no reason to try to
reenter kdb if a MC# is raised).
Reviewed by: kib
Tested by: avg (on AMD without PTI)
Differential Revision: https://reviews.freebsd.org/D13962
When building loader bits, lld fails with the following error:
"ld: error: section: .dynamic is not contiguous with other relro sections"
on both ubldr and EFI loader.
Move .dynamic up to make ld.lld happy, adjust .got as necessary for ubldr.
Tested on: OrangePi One (ld.lld, ubldr)
Tested on: Banana Pi-M3 (ld.lld, ubldr)
Tested on: qemu-armv7 (ld.lld, EFI)
Tested on: qemu-armv7 (ld.bfd, EFI)
Tested on: Raspberry Pi 2 (ld.bfd, ubldr) [manu]
Tested on: Banana Pi-M2 (ld.bfd, ubldr) [manu]
Reviewed by: andrew, emaste, imp
Differential Revision: https://reviews.freebsd.org/D13942
* Registers TRNG source for random(4)
* Finds available queues, LSBs; allocates static objects
* Allocates a shared MSI-X for all queues. The hardware does not have
separate interrupts per queue. Working interrupt mode driver.
* Computes SHA hashes, HMAC. Passes cryptotest.py, cryptocheck tests.
* Does AES-CBC, CTR mode, and XTS. cryptotest.py and cryptocheck pass.
* Support for "authenc" (AES + HMAC). (SHA1 seems to result in
"unaligned" cleartext inputs from cryptocheck -- which the engine
cannot handle. SHA2 seems to work fine.)
* GCM passes for block-multiple AAD, input lengths
Largely based on ccr(4), part of cxgbe(4).
Rough performance averages on AMD Ryzen 1950X (4kB buffer):
aesni: SHA1: ~8300 Mb/s SHA256: ~8000 Mb/s
ccp: ~630 Mb/s SHA256: ~660 Mb/s SHA512: ~700 Mb/s
cryptosoft: ~1800 Mb/s SHA256: ~1800 Mb/s SHA512: ~2700 Mb/s
As you can see, performance is poor in comparison to aesni(4) and even
cryptosoft (due to high setup cost). At a larger buffer size (128kB),
throughput is a little better (but still worse than aesni(4)):
aesni: SHA1:~10400 Mb/s SHA256: ~9950 Mb/s
ccp: ~2200 Mb/s SHA256: ~2600 Mb/s SHA512: ~3800 Mb/s
cryptosoft: ~1750 Mb/s SHA256: ~1800 Mb/s SHA512: ~2700 Mb/s
AES performance has a similar story:
aesni: 4kB: ~11250 Mb/s 128kB: ~11250 Mb/s
ccp: ~350 Mb/s 128kB: ~4600 Mb/s
cryptosoft: ~1750 Mb/s 128kB: ~1700 Mb/s
This driver is EXPERIMENTAL. You should verify cryptographic results on
typical and corner case inputs from your application against a known- good
implementation.
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12723
[COST]Fix PR35865: Fix cost model evaluation for shuffle on X86.
Summary:
If the vector type is transformed to non-vector single type, the
compile may crash trying to get vector information about non-vector
type.
Reviewers: RKSimon, spatel, mkuper, hfinkel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41862
This should fix "Not a vector MVT!" errors when building the
games/dhewm3 port.
Reported by: jbeich
PR: 225271
[ValueTracking] remove overzealous assert
The test is derived from a failing fuzz test:
https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=5008
Credit to @rksimon for pointing out the problem.
This should fix "Bad flavor while matching min/max" errors when building
the graphics/libsixel and science/kst2 ports.
Reported by: jbeich
PR: 225268, 225269
When a section placement (AT) command references the section itself,
the physical address of the section in the ELF header was calculated
incorrectly due to alignment happening right after the location
pointer's value was captured.
The problem was diagnosed and the first version of the patch written
by Erick Reyes.
Obtained from: LLVM r322421 by Rafael Espindola
The problem we had with it is that anything inside an AT is an
expression, so we failed to parse the section name because of the - in
it.
Requested by: royger
Obtained from: LLVM r322801 by Rafael Espindola
AT> lma_region expression allows to specify the memory region
for section load address.
Should fix [upstream LLVM] PR35684.
LLVM review: https://reviews.llvm.org/D41397
Obtained from: LLVM r322359 by George Rimar
In the !PTI case the NMI handler jumped past the instructions that set
%rdi to point to the current PCB, but the target instructions assumed %rdi
were set.
Reviewed by: kib
Tested by: pho
- The process stats are actually thread counts rather than process
counts.
- Simplify various descriptions to remove mention of stats that are
updated every 5 seconds (all VM related stats are now "instant",
only the load average is updated every 5 seconds).
- Don't make any mention of special treatment for processes that have
been active in the last 20 seconds. We don't track that stat.
- Rework the description of active virtual memory. Call it mapped
virtual memory and explicitly point out it is not the same as the
active page queue (which corresponds to "Active" in top(1)), and
also hint at the possible bogusness of the value (e.g. if a process
maps a single page out of a multiple GB file, the entire file's size
is considered mapped).
- Simplify a few descriptions that implied their output was a value
per interval. All of the "rate" values are per-second rates scaled
across the interval.
- Update a few comments for 'struct vmtotal' along similar lines.
Reported by: mwlucas (indirectly)
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D13905
This fixes operation on Qualcomm Snapdragon and some other platforms.
During boot time on subsystems initialization we have some amount of
kernel threads created, then scheduler gives CPU time to each thread.
Eventually scheduler returns CPU execution back to thread 0. In this
case writing zero to ttbr0 in cpu_switch leads Qualcomm board to
reboot (asynchronously, CPU continues execution).
Similar to other kernel threads install a valid physical address
(kernel pmap) to user page table base register ttbr0.
Reviewed by: andrew
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D13536
Apparently machinde/cpu.h is supposed to contain MD implementations of
MI interfaces. Also, remove kernphys declaration from machdep.c,
since it is already provided by md_var.h.
Requested and reviewed by: bde
MFC after: 13 days
Previously the calculations were done as if the requested region
ended at the start of the last requested page, not its end.
The problem as actually quite minor as it affected only stats and
page prefaulting, not the actual page data, and only with specific
parameters.
Reviewed by: kib (previous version)
MFC after: 2 weeks
When demoting DMAP pages curthread may be pointing to data within the
page we are demoting. Create a new invalidate that doesn't pin and use
it in the demote case.
As the demote has both interrupts disabled, and is within a critical section
this is safe from having the scheduler from switching to another CPU.
Reported by: loos
Reviewed by: loos
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D13955
In platform_smp_ap_init we are doing some crucial code (eg. set LPCR register)
which have influence over further execution.
Practiculary in PowerNV platform we have experienced Data Storage Interrupt
before we set apropriate LPCR. It caused code execution from location which was
legal in bootloader (petitboot based on linux) but illegal in FreeBSD
Set stack pointer to correct value after thread's stack pointer restore
Restoring new thread's stack pointer caused stack corruption because
restored stack pointer didn't point to callee (cpu_switch) stack frame but
caller stack frame.
As a result we had mysterious errors in caller function (sched_switch).
Solution: simply set stack pointer to correct value
Also, initialize TOC to a valid pointer once the thread is being
created.
Created by: Patryk Duda <pdk@semihalf.com>
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Reviewed by: nwhitehorn
Differential revision: https://reviews.freebsd.org/D13947
Sponsored by: QCM Technologies
Zero BSS always. The only case when this operation is
ommitted is when booting on BookE.
Created by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Reviewed by: imp, nwhitehorn
Differential revision: https://reviews.freebsd.org/D13948
Sponsored by: QCM Technologies
There is a case when not all CPUs went online. In that situation,
restart only APs which were operational before entering KDB.
Created by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Reviewed by: nwhitehorn
Differential revision: https://reviews.freebsd.org/D13949
Sponsored by: QCM Technologies
This matches directory structure used commonly in Linux-land, and it's
cleaner than mixing overlays into the existing module paths. Overlays are
still mixed in by specifying fdt_overlays in loader.conf(5).
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D13922
libfdt highlights since 1.4.3:
- fdt_property_placeholder added to create a property without specifying its
value at creation time
- stringlist helper functions added to libfdt
- Improved overlay support
- Various internal cleanup
Also switch stand/fdt over to using libfdt for overlay support with this
update. Our current overlay implementation works only for limited use cases
with overlays generated only by some specific versions of our dtc(1). Swap
it out for the libfdt implementation, which supports any properly generated
overlay being applied to a properly generated base.
This will be followed up fairly soon with an update to dtc(1) in tree to
properly generate overlays.
MFC note: the <stdlib.h> include this update introduces in libfdt_env.h is
apparently not necessary in the context we use this in. It's not immediately
clear to me the motivation for it being introduced, but it came in with
overlay support. I've left it in for the sake of accuracy and because it's
not harmful here on HEAD, but MFC'ing this to stable/11 will require
wrapping the #include in an `#ifndef _STANDALONE` block or else it will
cause build failures.
Tested on: Banana Pi-M3 (ARMv7)
Tested on: Pine64 (aarch64)
Tested on: PowerPC [nwhitehorn]
Reviewed by: manu, nwhitehorn
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D13893
Currently most of the debug registers are not saved and restored
during VM transitions allowing guest and host debug register values to
leak into the opposite context. One result is that hardware
watchpoints do not work reliably within a guest under VT-x.
Due to differences in SVM and VT-x, slightly different approaches are
used.
For VT-x:
- Enable debug register save/restore for VM entry/exit in the VMCS for
DR7 and MSR_DEBUGCTL.
- Explicitly save DR0-3,6 of the guest.
- Explicitly save DR0-3,6-7, MSR_DEBUGCTL, and the trap flag from
%rflags for the host. Note that because DR6 is "software" managed
and not stored in the VMCS a kernel debugger which single steps
through VM entry could corrupt the guest DR6 (since a single step
trap taken after loading the guest DR6 could alter the DR6
register). To avoid this, explicitly disable single-stepping via
the trace flag before loading the guest DR6. A determined debugger
could still defeat this by setting a breakpoint after the guest DR6
was loaded and then single-stepping.
For SVM:
- Enable debug register caching in the VMCB for DR6/DR7.
- Explicitly save DR0-3 of the guest.
- Explicitly save DR0-3,6-7, and MSR_DEBUGCTL for the host. Since SVM
saves the guest DR6 in the VMCB, the race with single-stepping
described for VT-x does not exist.
For both platforms, expose all of the guest DRx values via --get-drX
and --set-drX flags to bhyvectl.
Discussed with: avg, grehan
Tested by: avg (SVM), myself (VT-x)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D13229
ELF object files can contain program sections which are not supposed
to be loaded into memory (e.g. .comment). Normally the static linker
uses these flags to decide which sections are allocated to loadable
program segments in ELF binaries and shared objects (including kernels
on all architectures and kernel modules on architectures other than
amd64).
Mapping ELF object files (such as amd64 kernel modules) into memory
directly is a bit of a grey area. ELF object files are intended to be
used as inputs to the static linker. As a result, there is not a
standardized definition for what the memory layout of an ELF object
should be (none of the section headers have valid virtual memory
addresses for example).
The kernel and loader were not checking the SHF_ALLOC flag but loading
any program sections with certain types such as SHT_PROGBITS. As a
result, the kernel and loader would load into RAM some sections that
weren't marked with SHF_ALLOC such as .comment that are not loaded
into RAM for kernel modules on other architectures (which are
implemented as ELF shared objects). Aside from possibly requiring
slightly more RAM to hold a kernel module this does not affect runtime
correctness as the kernel relocates symbols based on the layout it
uses.
Debuggers such as gdb and lldb do not extract symbol tables from a
running process or kernel. Instead, they replicate the memory layout
of ELF executables and shared objects and use that to construct their
own symbol tables. For executables and shared objects this works
fine. For ELF objects the current logic in kgdb (and probably lldb
based on a simple reading) assumes that only sections with SHF_ALLOC
are memory resident when constructing a memory layout. If the
debugger constructs a different memory layout than the kernel, then it
will compute different addresses for symbols causing symbols in the
debugger to appear to have the wrong values (though the kernel itself
is working fine). The current port of mdb does not check SHF_ALLOC as
it replicates the kernel's logic in its existing kernel support.
The bfd linker sorts the sections in ELF object files such that all of
the allocated sections (sections with SHF_ALLOCATED) are placed first
followed by unallocated sections. As a result, when kgdb composed a
memory layout using only the allocated sections, this layout happened
to match the layout used by the kernel and loader. The lld linker
does not sort the sections in ELF object files and mixed allocated and
unallocated sections. This resulted in kgdb composing a different
memory layout than the kernel and loader.
We could either patch kgdb (and possibly in the future lldb) to use
custom handling when generating memory layouts for kernel modules that
are ELF objects, or we could change the kernel and loader to check
SHF_ALLOCATED. I chose the latter as I feel we shouldn't be loading
things into RAM that the module won't use. This should mostly be a
NOP when linking with bfd but will allow the existing kgdb to work
with amd64 kernel modules linked with lld.
Note that we only require SHF_ALLOC for "program" sections for types
like SHT_PROGBITS and SHT_NOBITS. Other section types such as symbol
tables, string tables, and relocations must also be loaded and are not
marked with SHF_ALLOC.
Reported by: np
Reviewed by: kib, emaste
MFC after: 1 month
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D13926
libxo imposes a large burden on system utilities. In the case of ls, that
burden is difficult to justify -- any language that can interact with json
output can use readdir(3) and stat(2).
Logically, this reverts r291607, r285857, r285803, r285734, r285425,
r284494, r284489, r284252, and r284198.
Kyua tests continue to pass (libxo integration was entirely untested).
Reported by: many
Reviewed by: imp
Discussed with: manu, bdrewery
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13959
pathconf(2) and fpathconf(2) both return a long. The kern_[f]pathconf()
functions now accept a pointer to a long value rather than modifying
td_retval directly. Instead, the system calls explicitly store the
returned long value in td_retval[0].
Requested by: bde
Reviewed by: kib
Sponsored by: Chelsio Communications
r326454.
bwn(4)/bhnd(4) has been tested with most chipsets currently supported by
bwn(4), and this change should be transparent to existing bwn(4) users;
please report any regressions that you do encounter.
To revert to using siba_bwn(4) instead of bhnd(4), place the following
lines in loader.conf(5):
hw.bwn_pci.preferred="0"
Once we're satisfied that the switch to bhnd(4) has seen sufficient broader
testing, bwn(4) will be migrated to use the native bhnd(9) interface
directly, and support for siba_bwn(4) will be dropped (see D13518).
Sponsored by: The FreeBSD Foundation
