- Destroy mutex in case of attach failure. [1]
- Lock properly em_watchdog(). [1]
- Lock properly em_sysctl_int_delay(). [1]
- Remove unused global adapter linked list.
- Remove unused dma_size field from struct em_dma_alloc.
- Do not touch interface statistics, that must be edited
only by upper layers. [1]
Submitted by: yongari [1]
o Do not mask the RX overrun interrupt.
o Rewrite em_intr():
- Axe EM_MAX_INTR.
- Cycle acknowledging interrupts and processing
packets until zero interrupt cause register is
read.
- If RX overrun comes in log this fact. [ NetBSD also
resets adapter in this case, but my tests showed that
this is not needed and only pessimizes behavior under
heavy load. ]
- Since almost all functions is rewritten, style the
remaining lines.
This fixes em(4) interfaces wedging under high load.
In collaboration with: wpaul, cognet
Obtained from: NetBSD
readable on certain random memory configurations. If the libkvm consumer
tried to read something that was in the very last pdpe, pde or pte slot,
it would bogusly fail.
This is broken in RELENG_6 too.
the parent's signal mask. Once daemon() forked, signals would be ignored
in the child thread. While I'm here, check the return value of daemon().
This fixes termination in the daemon case (bug introduced in last commit).
Noticed by: Frederik Lindberg
to unload the usb.ko module after boot if it was originally preloaded
from "/boot/loader.conf". When processing preloaded modules, the
linker erroneously added self-dependencies the each module's reference
count. That prevented usb.ko's reference count from ever going to 0,
so it could not be unloaded.
Sponsored by Isilon Systems.
Reviewed by: pjd, peter
MFC after: 1 week
- disable IPv6 operation if DAD fails for some EUI-64 link-local addresses.
- export get_hw_ifid() (and rename it) as a subroutine for this process.
Obtained from: KAME
Reviewd by: ume, gnn
MFC after: 2 week
Fix a debugging printf to printf after a variable is first assigned,
not before.
These are purely build fixes, and need inspection to make sure they
were what the original author of the previous changes intended.
flag. This fixes panic, when 'ifconfig em0 down' was called and it calls
em_stop() while the em_process_receive_interrupts() has temporarily
dropped the lock.
- fixed typos
- improved some comment descriptions
- use NULL, instead of 0, to denote a NULL pointer
- avoid embedding a magic number in the code
- use nd6log() instead of log() to record NDP-specific logs
- nuked an unnecessay white space
Obtained from: KAME
MFC after: 1 day
status. Add a thread that waits for events on the named pipe instead of
polling the line status via apm or the ACPI sysctl. Additionally, use
robust error handling in case devd goes away or we temporarily can't set
a frequency (i.e., passive cooling has preempted our setting).
Later, this should be improved so that if adaptive control is not being used,
we will block while waiting for AC line events, saving a little CPU.
Submitted by: Frederik Lindberg <fli+freebsd-current/shapeshifter.se>
sampling rate:
- Improve vchan chn_setspeed() strategy. Try to avoid FEEDER_RATE
on parent channel if the requested value is not supported
by the hardware.
- Fix vchan default speed calculation. In any case, vchan should
rely on parent bufsoft speed instead of bufhard since it is
possible that the entire feeder chain might involve FEEDER_RATE.
This is possible under extreme, rare condition if the above
chn_setspeed() strategy failed.
Approved by: netchild (mentor)
- Change ndis_return() from a DPC to a workitem so that it doesn't
run at DISPATCH_LEVEL (with the dispatcher lock held).
- In if_ndis.c, submit packets to the stack via (*ifp->if_input)() in
a workitem instead of doing it directly in ndis_rxeof(), because
ndis_rxeof() runs in a DPC, and hence at DISPATCH_LEVEL. This
implies that the 'dispatch level' mutex for the current CPU is
being held, and we don't want to call if_input while holding
any locks.
- Reimplement IoConnectInterrupt()/IoDisconnectInterrupt(). The original
approach I used to track down the interrupt resource (by scanning
the device tree starting at the nexus) is prone to problems when
two devices share an interrupt. (E.g removing ndis1 might disable
interrupts for ndis0.) The new approach is to multiplex all the
NDIS interrupts through a common internal dispatcher (ntoskrnl_intr())
and allow IoConnectInterrupt()/IoDisconnectInterrupt() to add or
remove interrupts from the dispatch list.
- Implement KeAcquireInterruptSpinLock() and KeReleaseInterruptSpinLock().
- Change the DPC and workitem threads to use the KeXXXSpinLock
API instead of mtx_lock_spin()/mtx_unlock_spin().
- Simplify the NdisXXXPacket routines by creating an actual
packet pool structure and using the InterlockedSList routines
to manage the packet queue.
- Only honor the value returned by OID_GEN_MAXIMUM_SEND_PACKETS
for serialized drivers. For deserialized drivers, we now create
a packet array of 64 entries. (The Microsoft DDK documentation
says that for deserialized miniports, OID_GEN_MAXIMUM_SEND_PACKETS
is ignored, and the driver for the Marvell 8335 chip, which is
a deserialized miniport, returns 1 when queried.)
- Clean up timer handling in subr_ntoskrnl.
- Add the following conditional debugging code:
NTOSKRNL_DEBUG_TIMERS - add debugging and stats for timers
NDIS_DEBUG_PACKETS - add extra sanity checking for NdisXXXPacket API
NTOSKRNL_DEBUG_SPINLOCKS - add test for spinning too long
- In kern_ndis.c, always start the HAL first and shut it down last,
since Windows spinlocks depend on it. Ntoskrnl should similarly be
started second and shut down next to last.
called during early init before cninit().
Tested on: i386, alpha, sparc64
Reviewed by: phk, imp
Reported by: Divacky Roman xdivac02 at stud dot fit dot vutbr dot cz
MFC after: 1 week
