The arm_physmem interface found in arm's MD code provides a convenient
set of routines for adding/excluding physical memory regions and
initializing important kernel globals such as Maxmem, realmem,
phys_avail[], and dump_avail[]. It is especially convenient for FDT
systems, since we can use FDT parsing functions and pass the result
directly to one of these physmem routines. This interface is already in
use on arm and arm64, and can be used to simplify this early
initialization on RISC-V as well.
This requires only a couple trivial changes:
- Move arm_physmem_kernel_addr to arm/machdep.c. It is unused on arm64,
and manipulated entirely in arm MD code.
- Convert arm32_btop/arm64_btop to atop. This is equivalently defined
on all architectures.
- Drop the "arm" prefix.
Reviewed by: manu, emaste ("looks reasonable")
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24153
Name each pcib driver uniquely.
This remove the warning printed at each arm boot :
module_register: cannot register simplebus/pcib from kernel; already loaded from kernel
While here, add a makefile in sys/modules/allwinner so it is built.
Also add the PNP info so devmatch will load this module automatically.
MFC after: 1 month
The upstream DTS now include the thermal device node and the SID
calibration entry.
Update our driver to cope with this change and remove the DTB
overlays that aren't needed anymore.
MFC after: 2 months
X-MFC-With: r359934
The fdt properties are now parsed via the help of mmc_fdt_helper functions.
This also adds card detection.
Note that on some boards (like the Pine64) card detection is broken due to
a missing resistor on the cd pin.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D23268
Honor ti,pmic-shutdown-controller option in DTS
Tested on stable r359316 @ Sleep mode on custom hw, Power off on BBB and PB
OFF bit [1] in status register control the pmic behaviour when PWR_EN pin
is pulled low.
On most AM335x hardware [beaglebone *] the desired behaviour are in fact
power off due to some hardware designs - read more in the comments around
pmic in sys/gnu/dts/arm/am335x-bone-common.dtsi
This patch let the device-tree decide with ti,pmic-shutdown-controller[2]
the state of off bit in status register.
[1] 8.6.12 table 12 http://www.ti.com/lit/ds/symlink/tps65217.pdf
[2] Documentation/devicetree/bindings/regulator/tps65217.txt
PR: 245159
Submitted by: Oskar Holmlund <oskar.holmlund@ohdata.se>
MFC after: 2 weeks
Modern debuggers and process tracers use ptrace() rather than procfs
for debugging. ptrace() has a supserset of functionality available
via procfs and new debugging features are only added to ptrace().
While the two debugging services share some fields in struct proc,
they each use dedicated fields and separate code. This results in
extra complexity to support a feature that hasn't been enabled in the
default install for several years.
PR: 244939 (exp-run)
Reviewed by: kib, mjg (earlier version)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D23837
The goal of this change is to make the atomic_load_acq_{8,16},
atomic_testandset{,_acq}_long, and atomic_testandclear_long primitives
available in MI-namespace.
The second goal is to get this draft out of my local tree, as anything that
requires a full tinderbox is a big burden out of tree. MD specifics can be
refined individually afterwards.
The generic implementations may not be ideal for your architecture; feel
free to implement better versions. If no subword_atomic definitions are
needed, the include can be removed from your arch's machine/atomic.h.
Generic definitions are guarded by defined macros of the same name. To
avoid picking up conflicting generic definitions, some macro defines are
added to various MD machine/atomic.h to register an existing implementation.
Include _atomic_subword.h in arm and arm64 machine/atomic.h.
For some odd reason, KCSAN only generates some versions of primitives.
Generate the _acq variants of atomic_load.*_8, atomic_load.*_16, and
atomic_testandset.*_long. There are other questionably disabled primitives,
but I didn't run into them, so I left them alone. KCSAN is only built for
amd64 in tinderbox for now.
Add atomic_subword implementations of atomic_load_acq_{8,16} implemented
using masking and atomic_load_acq_32.
Add generic atomic_subword implementations of atomic_testandset_long(),
atomic_testandclear_long(), and atomic_testandset_acq_long(), using
atomic_fcmpset_long() and atomic_fcmpset_acq_long().
On x86, add atomic_testandset_acq_long as an alias for
atomic_testandset_long.
Reviewed by: kevans, rlibby (previous versions both)
Differential Revision: https://reviews.freebsd.org/D22963
As defined in atomic(9) and implemented on other architectures, the
atomic(9) functions all act on unsigned pointers and types. Prior to this
revision, arm implemented some atomic(9) 'long' sized routines with correct
unsigned type, but others were incorrectly signed.
Reviewed by: tinderbox
Sponsored by: Dell EMC Isilon
When I implemented MD DYNAMIC parsing, I was originally passing a
linker_file_t so that the MD code could relocate pointers.
However, it turns out this isn't even filled in until later, so it was
always 0.
Just pass the load base (ef->address) directly, as that's really the only
thing we were interested in in the first place.
This fixes a crash on RB800 where it was trying to write to an unmapped
address when updating the GOT.
Reviewed by: jhibbits
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D24105
sys/arm/arm/identcpu-v6.c:227:5: error: misleading indentation; statement is not part of the previous 'if' [-Werror,-Wmisleading-indentation]
if (val & CPUV7_CT_CTYPE_RA)
^
sys/arm/arm/identcpu-v6.c:225:4: note: previous statement is here
if (val & CPUV7_CT_CTYPE_WB)
^
This was due to an accidentally inserted tab before the if statement.
MFC after: 3 days
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Approved by: kib (mentor, blanket)
Differential Revision: https://reviews.freebsd.org/D23635
sys/arm/allwinner/clkng/aw_clk_mipi.c:144:6: error: misleading indentation; statement is not part of the previous 'if' [-Werror,-Wmisleading-indentation]
m++;
^
sys/arm/allwinner/clkng/aw_clk_mipi.c:142:5: note: previous statement is here
if (best == *fout)
^
Move the increment operations into the for loop headers instead.
Discussed with: manu
MFC after: 3 days
sys/arm/allwinner/aw_cir.c:208:41: error: converting the result of '<<' to a boolean; did you mean '((1 & 255) << 23) != 0'? [-Werror,-Wint-in-bool-context]
active_delay = (AW_IR_ACTIVE_T + 1) * (AW_IR_ACTIVE_T_C ? 128 : 1);
^
sys/arm/allwinner/aw_cir.c:130:39: note: expanded from macro 'AW_IR_ACTIVE_T_C'
#define AW_IR_ACTIVE_T_C ((1 & 0xff) << 23)
^
Add the != 0 part to indicate that we indeed want to compare against
zero.
This reverts r177661. The change is no longer very useful since
out-of-tree KLDs will be built to target SMP kernels anyway. Moveover
it breaks the KBI in !SMP builds since cpuset_t's layout depends on the
value of MAXCPU, and several kernel interfaces, notably
smp_rendezvous_cpus(), take a cpuset_t as a parameter.
PR: 243711
Reviewed by: jhb, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23512
Submitted by: Bora Özarslan <borako.ozarslan@gmail.com>
Submitted by: Yang Wang <2333@outlook.jp>
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19917
Now that armv5 is gone, we no longer need multiple LINT files. Kill
the odd-ball support here. From now on, we just have LINT built from
notes like all the other platforms. Keep the removal of LINT-V5/7
to remove stale files for a while still..
After r355784 the td_oncpu field is no longer synchronized by the thread
lock, so the stack capture interrupt cannot be delievered precisely.
Fix this using a loop which drops the thread lock and restarts if the
wrong thread was sampled from the stack capture interrupt handler.
Change the implementation to use a regular interrupt instead of an NMI.
Now that we drop the thread lock, there is no advantage to the latter.
Simplify the KPIs. Remove stack_save_td_running() and add a return
value to stack_save_td(). On platforms that do not support stack
capture of running threads, stack_save_td() returns EOPNOTSUPP. If the
target thread is running in user mode, stack_save_td() returns EBUSY.
Reviewed by: kib
Reported by: mjg, pho
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23355
This is a qspi driver for the Xilinx Zynq-7000 chip.
It could be useful for anyone wanting to boot a system from flash memory
instead of SD cards.
Submitted by: Thomas Skibo (thomasskibo@yahoo.com)
Differential Revision: https://reviews.freebsd.org/D14698
Not all pins in Allwinner have interrupts support so we rely
on the padconf data to add the proper caps when pin_getcaps is called.
The pin is switch to the specific "eint" function during setup_intr and
switched back to its old function in teardown_intr.
Only INTR_MAP_DATA_GPIO is supported for now.
MFC after: 1 month
Add a eint_bank member to the allwinner_pins structure.
On Allwinner SoCs not all pins can do interrupt.
Older SoC (A10/A13 and A20) there is a maximum number of interrupts
set to 32 and all the configuration is done in the same registers.
While on "newer" SoCs (>=A31) interrupts registers are splitted per
pin bank (i.e. all interrupts available in bank B will be configured
with a sets of registers and the one in bank G in another set).
While here set the names to all interrupts function to
pX_eintY where X is the bank name and Y the interrupt number.
To whom ever in the future look at the H5 manual and notice that the bank F
have interrupts support : This isn't true, trust me.
MFC after: 1 month
r355473 vastly improved the readability and cleanliness of these Makefiles.
Every single one of them follows the same pattern and duplicates the exact
same logic.
Now that we have GENERATED/SRCS, split SRCS up into the two parameters we'll
use for ${MAKESYSCALLS} rather than assuming a specific ordering of SRCS and
include a common sysent.mk to handle the rest. This makes it less tedious to
make sweeping changes.
Some default values are provided for GENERATED/SYSENT_*; almost all of these
just use a 'syscalls.master' and 'syscalls.conf' in cwd, and they all use
effectively the same filenames with an arbitrary prefix. Most ABIs will be
able to get away with just setting GENERATED_PREFIX and including
^/sys/conf/sysent.mk, while others only need light additions. kern/Makefile
is the notable exception, as it doesn't take a SYSENT_CONF and the generated
files are spread out between ^/sys/kern and ^/sys/sys, but it otherwise fits
the pattern enough to use the common version.
Reviewed by: brooks, imp
Nice!: emaste
Differential Revision: https://reviews.freebsd.org/D23197
Raspberry Pi are all over the board, and the reality is that there's no harm
in including all of the definitions by default but plenty of harm in the
current situation. This change is safe because we match a definition by root
/compatible in the FDT, so there will be no false-positives because of it.
The main array of definitions grows, but it's only walked exactly once to
determine which we need to use.
The target-supply regulator is optional so don't fail if it's not present.
While here disable the clock on detach.
MFC after: 2 weeks
X-MFC-With: 356600
Each GPIO bank is powered by a different pin and so can be powered at different
voltage from different regulators.
Add a new config that now hold the pinmux data and the banks available on each
SoCs.
Since the aw_gpio driver being also the pinmux one it's attached before the PMIC
so add a config_intrhook_oneshot function that will enable the needed regulators
when the system is fully functional.
MFC after: 2 weeks
This method will set the desired voltaged based on values in the DTS.
It will not enable the regulator, this is the job of either a consumer
or regnode_set_constraint SYSINIT if the regulator is boot_on or always_on.
MFC after: 2 weeks
When either makesyscalls.lua or syscalls.master changes, all of the
${GENERATED} targets are now out-of-date. With make jobs > 1, this means we
will run the makesyscalls script in parallel for the same ABI, generating
the same set of output files.
Prior to r356603 , there is a large window for interlacing output for some
of the generated files that we were generating in-place rather than staging
in a temp dir. After that, we still should't need to run the script more
than once per-ABI as the first invocation should update all of them. Add
.ORDER to do so cleanly.
Reviewed by: brooks
Discussed with: sjg
Differential Revision: https://reviews.freebsd.org/D23099
This regulator is marked regulator-boot-on, but it will get shutdown if it's
not actually used/enabled by a driver. This should fix sata on the
cubieboard{1,2}.
Reported by: Ray White @ UWaterloo
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D23112
- Garbage collect UMA_ZONE_PAGEABLE & UMA_ZONE_STATIC.
- Move flag VTOSLAB from public to private.
- Introduce public NOTPAGE flag and make HASH private.
- Introduce public NOTOUCH flag and make OFFPAGE private.
- Update man page.
The net effect of this should be to make the contract with clients more
clear. Clients should choose constraints, UMA will figure out how to
implement them. This also breaks the confusing double meaning of
OFFPAGE.
Reviewed by: jeff, markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D23016
This is needed when the driver is compiled into the kernel.
When compiled as a module this will be called from another
code path as we also depend on ofw_spibus.
MFC after: 1 week
