Commit Graph

669 Commits

Author SHA1 Message Date
Marius Strobl
efd4fc3fb3 o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control
support in mii(4):
  - Merge generic flow control advertisement (which can be enabled by
    passing by MIIF_DOPAUSE to mii_attach(9)) and parsing support from
    NetBSD into mii_physubr.c and ukphy_subr.c. Unlike as in NetBSD,
    IFM_FLOW isn't implemented as a global option via the "don't care
    mask" but instead as a media specific option this. This has the
    following advantages:
    o allows flow control advertisement with autonegotiation to be
      turned on and off via ifconfig(8) with the default typically
      being off (though MIIF_FORCEPAUSE has been added causing flow
      control to be always advertised, allowing to easily MFC this
      changes for drivers that previously used home-grown support for
      flow control that behaved that way without breaking POLA)
    o allows to deal with PHY drivers where flow control advertisement
      with manual selection doesn't work or at least isn't implemented,
      like it's the case with brgphy(4), e1000phy(4) and ip1000phy(4),
      by setting MIIF_NOMANPAUSE
    o the available combinations of media options are readily available
      from the `ifconfig -m` output
  - Add IFM_FLOW to IFM_SHARED_OPTION_DESCRIPTIONS and IFM_ETH_RXPAUSE
    and IFM_ETH_TXPAUSE to IFM_SUBTYPE_ETHERNET_OPTION_DESCRIPTIONS so
    these are understood by ifconfig(8).
o Make the master/slave support in mii(4) actually usable:
  - Change IFM_ETH_MASTER from being implemented as a global option via
    the "don't care mask" to a media specific one as it actually is only
    applicable to IFM_1000_T to date.
  - Let mii_phy_setmedia() set GTCR_MAN_MS in IFM_1000_T slave mode to
    actually configure manually selected slave mode (like we also do in
    the PHY specific implementations).
  - Add IFM_ETH_MASTER to IFM_SUBTYPE_ETHERNET_OPTION_DESCRIPTIONS so it
    is understood by ifconfig(8).
o Switch bge(4), bce(4), msk(4), nfe(4) and stge(4) along with brgphy(4),
  e1000phy(4) and ip1000phy(4) to use the generic flow control support
  instead of home-grown solutions via IFM_FLAGs. This includes changing
  these PHY drivers and smcphy(4) to no longer unconditionally advertise
  support for flow control but only if the selected media has IFM_FLOW
  set (or MIIF_FORCEPAUSE is set) and implemented for these media variants,
  i.e. typically only for copper.
o Switch brgphy(4), ciphy(4), e1000phy(4) and ip1000phy(4) to report and
  set IFM_1000_T master mode via IFM_ETH_MASTER instead of via IFF_LINK0
  and some IFM_FLAGn.
o Switch brgphy(4) to add at least the the supported copper media based on
  the contents of the BMSR via mii_phy_add_media() instead of hardcoding
  them. The latter approach seems to have developed historically, besides
  causing unnecessary code duplication it was also undesirable because
  brgphy_mii_phy_auto() already based the capability advertisement on the
  contents of the BMSR though.
o Let brgphy(4) set IFM_1000_T master mode on all supported PHY and not
  just BCM5701. Apparently this was a misinterpretation of a workaround
  in the Linux tg3 driver; BCM5701 seem to require RGPHY_1000CTL_MSE and
  BRGPHY_1000CTL_MSC to be set when configuring autonegotiation but
  this doesn't mean we can't set these as well on other PHYs for manual
  media selection.
o Let ukphy_status() report IFM_1000_T master mode via IFM_ETH_MASTER so
  IFM_1000_T master mode support now is generally available with all PHY
  drivers.
o Don't let e1000phy(4) set master/slave bits for IFM_1000_SX as it's
  not applicable there.

Reviewed by:	yongari (plus additional testing)
Obtained from:	NetBSD (partially), OpenBSD (partially)
MFC after:	2 weeks
2010-11-14 13:26:10 +00:00
Lawrence Stewart
dbc4240942 This commit marks the first formal contribution of the "Five New TCP Congestion
Control Algorithms for FreeBSD" FreeBSD Foundation funded project. More details
about the project are available at: http://caia.swin.edu.au/freebsd/5cc/

- Add a KPI and supporting infrastructure to allow modular congestion control
  algorithms to be used in the net stack. Algorithms can maintain per-connection
  state if required, and connections maintain their own algorithm pointer, which
  allows different connections to concurrently use different algorithms. The
  TCP_CONGESTION socket option can be used with getsockopt()/setsockopt() to
  programmatically query or change the congestion control algorithm respectively
  from within an application at runtime.

- Integrate the framework with the TCP stack in as least intrusive a manner as
  possible. Care was also taken to develop the framework in a way that should
  allow integration with other congestion aware transport protocols (e.g. SCTP)
  in the future. The hope is that we will one day be able to share a single set
  of congestion control algorithm modules between all congestion aware transport
  protocols.

- Introduce a new congestion recovery (TF_CONGRECOVERY) state into the TCP stack
  and use it to decouple the meaning of recovery from a congestion event and
  recovery from packet loss (TF_FASTRECOVERY) a la RFC2581. ECN and delay based
  congestion control protocols don't generally need to recover from packet loss
  and need a different way to note a congestion recovery episode within the
  stack.

- Remove the net.inet.tcp.newreno sysctl, which simplifies some portions of code
  and ensures the stack always uses the appropriate mechanisms for recovering
  from packet loss during a congestion recovery episode.

- Extract the NewReno congestion control algorithm from the TCP stack and
  massage it into module form. NewReno is always built into the kernel and will
  remain the default algorithm for the forseeable future. Implementations of
  additional different algorithms will become available in the near future.

- Bump __FreeBSD_version to 900025 and note in UPDATING that rebuilding code
  that relies on the size of "struct tcpcb" is required.

Many thanks go to the Cisco University Research Program Fund at Community
Foundation Silicon Valley and the FreeBSD Foundation. Their support of our work
at the Centre for Advanced Internet Architectures, Swinburne University of
Technology is greatly appreciated.

In collaboration with:	David Hayes <dahayes at swin edu au> and
			Grenville Armitage <garmitage at swin edu au>
Sponsored by:	Cisco URP, FreeBSD Foundation
Reviewed by:	rpaulo
Tested by:	David Hayes (and many others over the years)
MFC after:	3 months
2010-11-12 06:41:55 +00:00
Andriy Gapon
130a081563 add dates along with revision numbers in UPDATING entry for 20100915 2010-10-25 07:39:05 +00:00
Ed Maste
337299c66d Add a note on the removal of copyright strings from login(1) and sshd(8). 2010-10-07 17:26:22 +00:00
Gordon Tetlow
fd77eab9e0 Add updating entry for manpath.config deprecation.
Approved by:	wes (mentor)
2010-10-04 15:39:53 +00:00
Andriy Gapon
f8fc818b9d UPDATING entry for r212647 2010-09-15 10:04:41 +00:00
Hiroki Sato
d3a8a8b9fa Split $ipv6_prefer into $ip6addrctl_policy and $ipv6_activate_all_interfaces.
The $ip6addrctl_policy is a variable to choose a pre-defined address
selection policy set by ip6addrctl(8).
The keyword "ipv4_prefer" sets IPv4-preferred one described in Section 10.3,
the keyword "ipv6_prefer" sets IPv6-preferred one in Section 2.1 in RFC 3484,
respectively.  When "AUTO" is specified, it attempts to read
/etc/ip6addrctl.conf first.  If it is found, it reads and installs it as
a policy table.  If not, either of the two pre-defined policy tables is
chosen automatically according to $ipv6_activate_all_interfaces.

When $ipv6_activate_all_interfaces=NO, interfaces which have no corresponding
$ifconfig_IF_ipv6 is marked as IFDISABLED for security reason.

The default values are ip6addrctl_policy=AUTO and
ipv6_activate_all_interfaces=NO.

Discussed with:	ume and bz
2010-09-13 19:55:40 +00:00
Rui Paulo
d69eb5201d Add a note about userland DTracing.
Sponsored by:	The FreeBSD Foundation
2010-09-13 17:49:39 +00:00
Rui Paulo
4065045502 Mention the removal of acpi_aiboost. 2010-07-25 18:32:59 +00:00
Gabor Kovesdan
4dc88ebedf Add BSD grep to the base system and make it our default grep.
Deliverables: Small and clean code (1,4 KSLOC vs GNU's 8,5 KSLOC),
              lower memory usage than GNU grep, GNU compatibility,
              BSD license.

TODO:         Performance is somewhat behind GNU grep but it is only
              significant for bigger searches.  The reason is complex, the
              most important factor is that GNU grep uses lots of
              optimizations to improve the speed of the regex library.
              First, we need a modern regex library (practically by adopting
              TRE), add support for GNU-style non-standard regexes and then
              reevalute the performance issues and look for bottlenecks.  In
              the meantime, for those, who need better performance, it is
              possible to build GNU grep by setting WITH_GNU_GREP.

Approved by:            delphij (mentor)
Obtained from:          OpenBSD (http://www.openbsd.org/cgi-bin/cvsweb/src/usr.bin/grep/),
                        freegrep (http://github.com/howardjp/freegrep)
Sponsored by:           Google SoC 2008
Portbuild tests run by: kris, pav, erwin
Acknowledgements to:    fjoe (as SoC 2008 mentor),
                        everyone who helped in reviewing and testing
2010-07-22 19:11:57 +00:00
Nathan Whitehorn
c3e289e1ce MFppc64:
Kernel sources for 64-bit PowerPC, along with build-system changes to keep
32-bit kernels compiling (build system changes for 64-bit kernels are
coming later). Existing 32-bit PowerPC kernel configurations must be
updated after this change to specify their architecture.
2010-07-13 05:32:19 +00:00
Martin Matuska
8fc257994d Merge ZFS version 15 and almost all OpenSolaris bugfixes referenced
in Solaris 10 updates 141445-09 and 142901-14.

Detailed information:
(OpenSolaris revisions and Bug IDs, Solaris 10 patch numbers)

7844:effed23820ae
6755435	zfs_open() and zfs_close() needs to use ZFS_ENTER/ZFS_VERIFY_ZP (141445-01)

7897:e520d8258820
6748436	inconsistent zpool.cache in boot_archive could panic a zfs root filesystem upon boot-up (141445-01)

7965:b795da521357
6740164	zpool attach can create an illegal root pool (141909-02)

8084:b811cc60d650
6769612	zpool_import() will continue to write to cachefile even if altroot is set (N/A)

8121:7fd09d4ebd9c
6757430	want an option for zdb to disable space map loading and leak tracking (141445-01)

8129:e4f45a0bfbb0
6542860	ASSERT: reason != VDEV_LABEL_REMOVE||vdev_inuse(vd, crtxg, reason, 0) (141445-01)

8188:fd00c0a81e80
6761100	want zdb option to select older uberblocks (141445-01)

8190:6eeea43ced42
6774886	zfs_setattr() won't allow ndmp to restore SUNWattr_rw (141445-01)

8225:59a9961c2aeb
6737463	panic while trying to write out config file if root pool import fails (141445-01)

8227:f7d7be9b1f56
6765294	Refactor replay (141445-01)

8228:51e9ca9ee3a5
6572357	libzfs should do more to avoid mnttab lookups (141909-01)
6572376	zfs_iter_filesystems and zfs_iter_snapshots get objset stats twice (141909-01)

8241:5a60f16123ba
6328632	zpool offline is a bit too conservative (141445-01)
6739487	ASSERT: txg <= spa_final_txg due to scrub/export race (141445-01)
6767129	ASSERT: cvd->vdev_isspare, in spa_vdev_detach() (141445-01)
6747698	checksum failures after offline -t / export / import / scrub (141445-01)
6745863	ZFS writes to disk after it has been offlined (141445-01)
6722540	50% slowdown on scrub/resilver with certain vdev configurations (141445-01)
6759999	resilver logic rewrites ditto blocks on both source and destination (141445-01)
6758107	I/O should never suspend during spa_load() (141445-01)
6776548	codereview(1) runs off the page when faced with multi-line comments (N/A)
6761406	AMD errata 91 workaround doesn't work on 64-bit systems (141445-01)

8242:e46e4b2f0a03
6770866	GRUB/ZFS should require physical path or devid, but not both (141445-01)

8269:03a7e9050cfd
6674216	"zfs share" doesn't work, but "zfs set sharenfs=on" does (141445-01)
6621164	$SRC/cmd/zfs/zfs_main.c seems to have a syntax error in the translation note (141445-01)
6635482	i18n problems in libzfs_dataset.c and zfs_main.c (141445-01)
6595194	"zfs get" VALUE column is as wide as NAME (141445-01)
6722991	vdev_disk.c: error checking for ddi_pathname_to_dev_t() must test for NODEV (141445-01)
6396518	ASSERT strings shouldn't be pre-processed (141445-01)

8274:846b39508aff
6713916	scrub/resilver needlessly decompress data (141445-01)

8343:655db2375fed
6739553	libzfs_status msgid table is out of sync (141445-01)
6784104	libzfs unfairly rejects numerical values greater than 2^63 (141445-01)
6784108	zfs_realloc() should not free original memory on failure (141445-01)

8525:e0e0e525d0f8
6788830	set large value to reservation cause core dump (141445-01)
6791064	want sysevents for ZFS scrub (141445-01)
6791066	need to be able to set cachefile on faulted pools (141445-01)
6791071	zpool_do_import() should not enable datasets on faulted pools (141445-01)
6792134	getting multiple properties on a faulted pool leads to confusion (141445-01)

8547:bcc7b46e5ff7
6792884	Vista clients cannot access .zfs (141445-01)

8632:36ef517870a3
6798384	It can take a village to raise a zio (141445-01)

8636:7e4ce9158df3
6551866	deadlock between zfs_write(), zfs_freesp(), and zfs_putapage() (141909-01)
6504953	zfs_getpage() misunderstands VOP_GETPAGE() interface (141909-01)
6702206	ZFS read/writer lock contention throttles sendfile() benchmark (141445-01)
6780491	Zone on a ZFS filesystem has poor fork/exec performance (141445-01)
6747596	assertion failed: DVA_EQUAL(BP_IDENTITY(&zio->io_bp_orig), BP_IDENTITY(zio->io_bp))); (141445-01)

8692:692d4668b40d
6801507	ZFS read aggregation should not mind the gap (141445-01)

8697:e62d2612c14d
6633095	creating a filesystem with many properties set is slow (141445-01)

8768:dfecfdbb27ed
6775697	oracle crashes when overwriting after hitting quota on zfs (141909-01)

8811:f8deccf701cf
6790687	libzfs mnttab caching ignores external changes (141445-01)
6791101	memory leak from libzfs_mnttab_init (141445-01)

8845:91af0d9c0790
6800942	smb_session_create() incorrectly stores IP addresses (N/A)
6582163	Access Control List (ACL) for shares (141445-01)
6804954	smb_search - shortname field should be space padded following the NULL terminator (N/A)
6800184	Panic at smb_oplock_conflict+0x35() (N/A)

8876:59d2e67b4b65
6803822	Reboot after replacement of system disk in a ZFS mirror drops to grub> prompt (141445-01)

8924:5af812f84759
6789318	coredump when issue zdb -uuuu poolname/ (141445-01)
6790345 zdb -dddd -e poolname coredump (141445-01)
6797109 zdb: 'zdb -dddddd pool_name/fs_name inode' coredump if the file with inode was deleted (141445-01)
6797118 zdb: 'zdb -dddddd poolname inum' coredump if I miss the fs name (141445-01)
6803343 shareiscsi=on failed, iscsitgtd failed request to share (141445-01)

9030:243fd360d81f
6815893	hang mounting a dataset after booting into a new boot environment (141445-01)

9056:826e1858a846
6809691	'zpool create -f' no longer overwrites ufs infomation (141445-01)

9179:d8fbd96b79b3
6790064	zfs needs to determine uid and gid earlier in create process (141445-01)

9214:8d350e5d04aa
6604992	forced unmount + being in .zfs/snapshot/<snap1> = not happy (141909-01)
6810367	assertion failed: dvp->v_flag & VROOT, file: ../../common/fs/gfs.c, line: 426 (141909-01)

9229:e3f8b41e5db4
6807765	ztest_dsl_dataset_promote_busy needs to clean up after ENOSPC (141445-01)

9230:e4561e3eb1ef
6821169	offlining a device results in checksum errors (141445-01)
6821170	ZFS should not increment error stats for unavailable devices (141445-01)
6824006	need to increase issue and interrupt taskqs threads in zfs (141445-01)

9234:bffdc4fc05c4
6792139	recovering from a suspended pool needs some work (141445-01)
6794830	reboot command hangs on a failed zfs pool (141445-01)

9246:67c03c93c071
6824062	System panicked in zfs_mount due to NULL pointer dereference when running btts and svvs tests (141909-01)

9276:a8a7fc849933
6816124	System crash running zpool destroy on broken zpool (141445-03)

9355:09928982c591
6818183	zfs snapshot -r is slow due to set_snap_props() doing txg_wait_synced() for each new snapshot (141445-03)

9391:413d0661ef33
6710376	log device can show incorrect status when other parts of pool are degraded (141445-03)

9396:f41cf682d0d3 (part already merged)
6501037	want user/group quotas on ZFS (141445-03)
6827260	assertion failed in arc_read(): hdr == pbuf->b_hdr (141445-03)
6815592	panic: No such hold X on refcount Y from zfs_znode_move (141445-03)
6759986	zfs list shows temporary %clone when doing online zfs recv (141445-03)

9404:319573cd93f8
6774713	zfs ignores canmount=noauto when sharenfs property != off (141445-03)

9412:4aefd8704ce0
6717022	ZFS DMU needs zero-copy support (141445-03)

9425:e7ffacaec3a8
6799895	spa_add_spares() needs to be protected by config lock (141445-03)
6826466	want to post sysevents on hot spare activation (141445-03)
6826468	spa 'allowfaulted' needs some work (141445-03)
6826469	kernel support for storing vdev FRU information (141445-03)
6826470	skip posting checksum errors from DTL regions of leaf vdevs (141445-03)
6826471	I/O errors after device remove probe can confuse FMA (141445-03)
6826472	spares should enjoy some of the benefits of cache devices (141445-03)

9443:2a96d8478e95
6833711	gang leaders shouldn't have to be logical (141445-03)

9463:d0bd231c7518
6764124	want zdb to be able to checksum metadata blocks only (141445-03)

9465:8372081b8019
6830237	zfs panic in zfs_groupmember() (141445-03)

9466:1fdfd1fed9c4
6833162	phantom log device in zpool status (141445-03)

9469:4f68f041ddcd
6824968	add ZFS userquota support to rquotad (141445-03)

9470:6d827468d7b5
6834217	godfather I/O should reexecute (141445-03)

9480:fcff33da767f
6596237	Stop looking and start ganging (141909-02)

9493:9933d599bc93
6623978	lwb->lwb_buf != NULL, file ../../../uts/common/fs/zfs/zil.c, line 787, function zil_lwb_commit (141445-06)

9512:64cafcbcc337
6801810	Commit of aligned streaming rewrites to ZIL device causes unwanted disk reads (N/A)

9515:d3b739d9d043
6586537	async zio taskqs can block out userland commands (142901-09)

9554:787363635b6a
6836768	zfs_userspace() callback has no way to indicate failure (N/A)

9574:1eb6a6ab2c57
6838062	zfs panics when an error is encountered in space_map_load() (141909-02)

9583:b0696cd037cc
6794136	Panic BAD TRAP: type=e when importing degraded zraid pool. (141909-03)

9630:e25a03f552e0
6776104	"zfs import" deadlock between spa_unload() and spa_async_thread() (141445-06)

9653:a70048a304d1
6664765	Unable to remove files when using fat-zap and quota exceeded on ZFS filesystem (141445-06)

9688:127be1845343
6841321	zfs userspace / zfs get userused@ doesn't work on mounted snapshot (N/A)
6843069	zfs get userused@S-1-... doesn't work (N/A)

9873:8ddc892eca6e
6847229	assertion failed: refcount_count(&tx->tx_space_written) + delta <= tx->tx_space_towrite in dmu_tx.c (141445-06)

9904:d260bd3fd47c
6838344	kernel heap corruption detected on zil while stress testing (141445-06)

9951:a4895b3dd543
6844900	zfs_ioc_userspace_upgrade leaks (N/A)

10040:38b25aeeaf7a
6857012	zfs panics on zpool import (141445-06)

10000:241a51d8720c
6848242	zdb -e no longer works as expected (N/A)

10100:4a6965f6bef8
6856634	snv_117 not booting: zfs_parse_bootfs: error2 (141445-07)

10160:a45b03783d44
6861983	zfs should use new name <-> SID interfaces (N/A)
6862984	userquota commands can hang (141445-06)

10299:80845694147f
6696858	zfs receive of incremental replication stream can dereference NULL pointer and crash (N/A)

10302:a9e3d1987706
6696858	zfs receive of incremental replication stream can dereference NULL pointer and crash (fix lint) (N/A)

10575:2a8816c5173b (partial merge)
6882227 spa_async_remove() shouldn't do a full clear (142901-14)

10800:469478b180d9
6880764	fsync on zfs is broken if writes are greater than 32kb on a hard crash and no log attached (142901-09)
6793430 zdb -ivvvv assertion failure: bp->blk_cksum.zc_word[2] == dmu_objset_id(zilog->zl_os) (N/A)

10801:e0bf032e8673 (partial merge)
6822816 assertion failed: zap_remove_int(ds_next_clones_obj) returns ENOENT (142901-09)

10810:b6b161a6ae4a
6892298 buf->b_hdr->b_state != arc_anon, file: ../../common/fs/zfs/arc.c, line: 2849 (142901-09)

10890:499786962772
6807339	spurious checksum errors when replacing a vdev (142901-13)

11249:6c30f7dfc97b
6906110 bad trap panic in zil_replay_log_record (142901-13)
6906946 zfs replay isn't handling uid/gid correctly (142901-13)

11454:6e69bacc1a5a
6898245 suspended zpool should not cause rest of the zfs/zpool commands to hang (142901-10)

11546:42ea6be8961b (partial merge)
6833999 3-way deadlock in dsl_dataset_hold_ref() and dsl_sync_task_group_sync() (142901-09)

Discussed with:	pjd
Approved by:	delphij (mentor)
Obtained from:	OpenSolaris (multiple Bug IDs)
MFC after:	2 months
2010-07-12 23:49:04 +00:00
Christian Brueffer
e409c5c823 Note 8.0-RELEASE.
PR:		143824
Submitted by:	pluknet <pluknet@gmail.com>
2010-05-12 21:20:04 +00:00
Kip Macy
2965a45315 On Alan's advice, rather than do a wholesale conversion on a single
architecture from page queue lock to a hashed array of page locks
(based on a patch by Jeff Roberson), I've implemented page lock
support in the MI code and have only moved vm_page's hold_count
out from under page queue mutex to page lock. This changes
pmap_extract_and_hold on all pmaps.

Supported by: Bitgravity Inc.

Discussed with: alc, jeffr, and kib
2010-04-30 00:46:43 +00:00
Alexander Leidinger
21edb039c6 WITH_CTF can now be specified in src.conf (not recommended, there
are some problems with static executables), make.conf (would also
affect ports which do not use GNU make and do not override the
compile targets) or in the kernel config (via "makeoptions
WITH_CTF=yes").

Additional (related) changes:
 - propagate WITH_CTF to module builds
 - do not add -g to the linker flags, it's a noop there anyway
   (at least according to the man page of ld)
 - do not add -g to CFLAGS unconditionally
   we need to have a look if it is really needed (IMO not) or if there
   is a way to add it only when WITH_CTF is used

Note: ctfconvert / ctfmerge lines will not appear in the build output,
to protect the innocent (those which do not build with WITH_CTF would
see the shell-test and may think WITH_CTF is used).

Reviewed by:	imp, jhb, scottl (earlier version)
Discussed on:	arch@
2010-04-02 06:55:31 +00:00
Nathan Whitehorn
841c0c7ec7 Provide groundwork for 32-bit binary compatibility on non-x86 platforms,
for upcoming 64-bit PowerPC and MIPS support. This renames the COMPAT_IA32
option to COMPAT_FREEBSD32, removes some IA32-specific code from MI parts
of the kernel and enhances the freebsd32 compatibility code to support
big-endian platforms.

Reviewed by:	kib, jhb
2010-03-11 14:49:06 +00:00
David E. O'Brien
8fb1e03807 Use more proper terms (from official documents) for AMD CPU's.
Reviewed by:	imp
2010-03-10 06:10:39 +00:00
Doug Barton
50e8eca680 Add -i to the first post-install mergemaster example to make
it consistent with the other. [1]

Add a note about -U to the mergemaster footnote.

Submitted by:	obrien [1]
2010-03-10 05:44:57 +00:00
Ed Schouten
5ab7f1fc40 Add wtmpcvt(1).
This utility allows users to convert their wtmp databases to the new
format. It makes no sense for users to keep their wtmp log files if they
are unable to view them.

It basically copies ut_line into ut_id as well. This makes it possible
for last(1) and ac(8) to match login records with their corresponding
logout record.
2010-01-14 20:58:45 +00:00
Ed Schouten
279d8efe8d Complete the migration towards utmpx.
- Add a notice to UPDATING, explaining users may need to recompile
  applications that use the old database.
- Bump __FreeBSD_version.
2010-01-13 19:25:03 +00:00
Attilio Rao
f7829d0d5c Introduce the new kernel thread called "deadlock resolver".
While the name is pretentious, a good explanation of its targets is
reported in this 17 months old presentation e-mail:
http://lists.freebsd.org/pipermail/freebsd-arch/2008-August/008452.html

In order to implement it, the sq_type in sleepqueues is mandatory and not
only compiled along with INVARIANTS option. Additively, a new sleepqueue
function, sleepq_type() is added, returning the type of the sleepqueue
linked to a wchan.
Three new sysctls are added in order to configure the thread:
debug.deadlkres.slptime_threshold
debug.deadlkres.blktime_threshold
debug.deadlkres.sleepfreq

rappresenting the thresholds for sleep and block time that will lead to
a deadlock matching (when exceeded), while the sleepfreq rappresents the
number of seconds between 2 consecutive thread runnings.
In order to enable the deadlock resolver thread recompile your kernel
with the option DEADLKRES.

Reviewed by:	jeff
Tested by:	pho, Giovanni Trematerra
Sponsored by:	Nokia Incorporated, Sandvine Incorporated
MFC after:	2 weeks
2010-01-09 01:46:38 +00:00
Ruslan Ermilov
1733d35c9c Fixed two typos.
Submitted by:	Maxim Dounin <mdounin@mdounin.ru>
2009-12-25 21:14:34 +00:00
Hajimu UMEMOTO
f2cb5f03a9 Mention the unification of rc.firewall and rc.firewall6.
Suggested by:	David Horn <dhorn2000__at__gmail.com>
2009-12-18 16:35:28 +00:00
Doug Barton
96b4300c62 Add a note that wpa_supplicant(8) may require a full world build to
sync up with 20091109.
2009-11-21 01:43:22 +00:00
Ed Schouten
4b2361f811 Convert syscons on i386 to TERM=xterm.
TEKEN_XTERM is now gone. Because we always use xterm mode now, we only
need a TEKEN_CONS25 switch to go back to cons25.
2009-11-13 11:28:54 +00:00
Ed Schouten
e42fc36867 Switch the default terminal emulation style to xterm for most platforms.
Right now syscons(4) uses a cons25-style terminal emulator. The
disadvantages of that are:

- Little compatibility with embedded devices with serial interfaces.
- Bad bandwidth efficiency, mainly because of the lack of scrolling
  regions.
- A very hard transition path to support for modern character sets like
  UTF-8.

Our terminal emulation library, libteken, has been supporting
xterm-style terminal emulation for months, so flip the switch and make
everyone use an xterm-style console driver.

I still have to enable this on i386. Right now pc98 and i386 share the
same /etc/ttys file. I'm not going to switch pc98, because it uses its
own Kanji-capable cons25 emulator.

IMPORTANT: What to do if things go wrong (i.e. graphical artifacts):

- Run the application inside script(1), try to reduce the problem and
  send me the log file.
- In the mean time, you can run `vidcontrol -T cons25' and `export
  TERM=cons25' so you can run applications the same way you did before.
  You can also build your kernel with `options TEKEN_CONS25' to make all
  virtual terminals use the cons25 emulator by default.

Discussed on:	current@
2009-11-13 05:54:55 +00:00
Rui Paulo
07ddebb5fb Mention the layout change of ieee80211req_scan_result. 2009-11-09 16:05:32 +00:00
Andrew Thompson
21293e7016 Belatedly add an UPDATING message for the usb ethernet ifnet naming in r188412.
MFC after:	3 days
2009-11-03 21:06:19 +00:00
Alexander Motin
b868265d82 Document atapci kernel module split.
PR:		amd64/139859
MFC after:	3 days
2009-10-26 09:16:08 +00:00
Rui Paulo
63b49c2b8a Explain that iwn was updated and the firmware images are now split. 2009-10-25 10:29:37 +00:00
Hiroki Sato
2e77c5abfb Fix several logic bugs in the previous IPv6 variable change and
re-add $ipv6_enable support for backward compatibility.  From
UPDATING:

 1. To use IPv6, simply define $ifconfig_IF_ipv6 like $ifconfig_IF
    for IPv4.  For aliases, $ifconfig_IF_aliasN should be used.
    Note that both variables need the "inet6" keyword at the head.

    Do not set $ipv6_network_interfaces manually if you do not
    understand what you are doing.  It is not needed in most cases.

    $ipv6_ifconfig_IF and $ipv6_ifconfig_IF_aliasN still work, but
    they are obsolete.

 2. $ipv6_enable is obsolete.  Use $ipv6_prefer and/or
    "inet6 accept_rtadv" keyword in ifconfig(8) instead.

    If you define $ipv6_enable=YES, it means $ipv6_prefer=YES and
    all configured interfaces have "inet6 accept_rtadv" in the
    $ifconfig_IF_ipv6.  These are for backward compatibility.

 3. A new variable $ipv6_prefer has been added.  If NO, IPv6
    functionality of interfaces with no corresponding
    $ifconfig_IF_ipv6 is disabled by using "inet6 ifdisabled" flag,
    and the default address selection policy of ip6addrctl(8)
    is the IPv4-preferred one (see rc.d/ip6addrctl for more details).
    Note that if you want to configure IPv6 functionality on the
    disabled interfaces after boot, first you need to clear the flag by
    using ifconfig(8) like:

         ifconfig em0 inet6 -ifdisabled

    If YES, the default address selection policy is set as
    IPv6-preferred.

    The default value of $ipv6_prefer is NO.

 4. If your system need to receive Router Advertisement messages,
    define "inet6 accept_rtadv" in $ifconfig_IF_ipv6.  The rc(8)
    scripts automatically invoke rtsol(8) when the interface becomes
    UP.  The Router Advertisement messages are used for SLAAC
    (State-Less Address AutoConfiguration).
2009-09-26 18:59:00 +00:00
Rui Paulo
350036a06d Note the D3.03 mesh changes.
MFC after:	1 week
2009-09-22 18:19:18 +00:00
Pawel Jakub Dawidek
63e1d3df27 - Mount ZFS snapshots with MNT_IGNORE flag, so they are not visible in regular
df(1) and mount(8) output. This is a bit smilar to OpenSolaris and follows
  ZFS route of not listing snapshots by default with 'zfs list' command.
- Add UPDATING entry to note that ZFS snapshots are no longer visible in
  mount(8) and df(1) output by default.

Reviewed by:	kib
MFC after:	3 days
2009-09-14 21:10:40 +00:00
Warner Losh
f6a4f4b521 Go ahead and mention the CVS branch name as well as the svn branch name. 2009-09-05 08:09:35 +00:00
Warner Losh
411c7658a8 Note migration of tunable from hw.bus.devctl_disable to
hw.bus.devctl_queue.  The sysctl interface provides legacys upport for
the latter sysctl, but the tunable support was removed.

MFC after:	1 day
2009-09-05 08:08:14 +00:00
Warner Losh
4a19f42fe7 Actually, stable/8 is what was created... 2009-09-03 17:13:54 +00:00
Warner Losh
456b5dd815 Time for house-cleaning:
o remove all entries before RELENG_7 was branched, as is tradition[*].
o Update examples...  nobody cares about 5.x upgrades.
o minor format tweaking in a few places.
o update copyright (although at best I hold an editors copyright these days).
o Remove giving people permission to buy me beer.  I don't do enough for
  this document for that anymore...
2009-09-03 17:04:42 +00:00
Ken Smith
cf48cc9f69 Make head 9.0-CURRENT in preparation for lifting code freeze.
Approved by:	re (implicit)
2009-08-22 23:44:37 +00:00
Attilio Rao
dc6fbf6545 * Completely Remove the option STOP_NMI from the kernel. This option
has proven to have a good effect when entering KDB by using a NMI,
but it completely violates all the good rules about interrupts
disabled while holding a spinlock in other occasions.  This can be the
cause of deadlocks on events where a normal IPI_STOP is expected.
* Adds an new IPI called IPI_STOP_HARD on all the supported architectures.
This IPI is responsible for sending a stop message among CPUs using a
privileged channel when disponible. In other cases it just does match a
normal IPI_STOP.
Right now the IPI_STOP_HARD functionality uses a NMI on ia32 and amd64
architectures, while on the other has a normal IPI_STOP effect. It is
responsibility of maintainers to eventually implement an hard stop
when necessary and possible.
* Use the new IPI facility in order to implement a new userend SMP kernel
function called stop_cpus_hard(). That is specular to stop_cpu() but
it does use the privileged channel for the stopping facility.
* Let KDB use the newly introduced function stop_cpus_hard() and leave
stop_cpus() for all the other cases
* Disable interrupts on CPU0 when starting the process of APs suspension.
* Style cleanup and comments adding

This patch should fix the reboot/shutdown deadlocks many users are
constantly reporting on mailing lists.

Please don't forget to update your config file with the STOP_NMI
option removal

Reviewed by:	jhb
Tested by:	pho, bz, rink
Approved by:	re (kib)
2009-08-13 17:09:45 +00:00
Konstantin Belousov
560bf6e4ae Note that COMPAT_43 requires COMPAT_FREEBSD7 too.
Submitted by:	Steve Kargl
Approved by:	re (kensmith)
2009-07-26 20:12:06 +00:00
Ken Smith
3ca3047aee Bump the version of all non-symbol-versioned shared libraries in
preparation for 8.0-RELEASE.  Add the previous version of those
libraries to ObsoleteFiles.inc and bump __FreeBSD_Version.

Reviewed by:    kib
Approved by:    re (rwatson)
2009-07-19 17:25:24 +00:00
Robert Watson
eddfbb763d Build on Jeff Roberson's linker-set based dynamic per-CPU allocator
(DPCPU), as suggested by Peter Wemm, and implement a new per-virtual
network stack memory allocator.  Modify vnet to use the allocator
instead of monolithic global container structures (vinet, ...).  This
change solves many binary compatibility problems associated with
VIMAGE, and restores ELF symbols for virtualized global variables.

Each virtualized global variable exists as a "reference copy", and also
once per virtual network stack.  Virtualized global variables are
tagged at compile-time, placing the in a special linker set, which is
loaded into a contiguous region of kernel memory.  Virtualized global
variables in the base kernel are linked as normal, but those in modules
are copied and relocated to a reserved portion of the kernel's vnet
region with the help of a the kernel linker.

Virtualized global variables exist in per-vnet memory set up when the
network stack instance is created, and are initialized statically from
the reference copy.  Run-time access occurs via an accessor macro, which
converts from the current vnet and requested symbol to a per-vnet
address.  When "options VIMAGE" is not compiled into the kernel, normal
global ELF symbols will be used instead and indirection is avoided.

This change restores static initialization for network stack global
variables, restores support for non-global symbols and types, eliminates
the need for many subsystem constructors, eliminates large per-subsystem
structures that caused many binary compatibility issues both for
monitoring applications (netstat) and kernel modules, removes the
per-function INIT_VNET_*() macros throughout the stack, eliminates the
need for vnet_symmap ksym(2) munging, and eliminates duplicate
definitions of virtualized globals under VIMAGE_GLOBALS.

Bump __FreeBSD_version and update UPDATING.

Portions submitted by:  bz
Reviewed by:            bz, zec
Discussed with:         gnn, jamie, jeff, jhb, julian, sam
Suggested by:           peter
Approved by:            re (kensmith)
2009-07-14 22:48:30 +00:00
Lawrence Stewart
237fbe0a1c Replace struct tcpopt with a proxy toeopt struct in the TOE driver interface to
the TCP syncache. This returns struct tcpopt to being private within the TCP
implementation, thus allowing it to be modified without ABI concerns.

The patch breaks the ABI. Bump __FreeBSD_version to 800103 accordingly. The cxgb
driver is the only TOE consumer affected by this change, and needs to be
recompiled along with the kernel.

Suggested by:	rwatson
Reviewed by:	rwatson, kmacy
Approved by:	re (kensmith), kensmith (mentor temporarily unavailable)
2009-07-13 11:51:02 +00:00
Lawrence Stewart
962ebef8c0 Pad the following TCP related structs to allow MFCs of upcoming features/fixes
back to the 8 branch:

tcp_var.h
- struct sackhint
- struct tcpcb
- struct tcpstat

The patch breaks the ABI. Bump __FreeBSD_version to 800102 accordingly. User
space tools that rely on the size of any of these structs (e.g. sockstat) need
to be recompiled.

Reviewed by:	rpaulo, sam, andre, rwatson
Approved by:	re & mentor (gnn)
2009-07-12 09:14:28 +00:00
Doug Rabson
81611ea7c6 Clarify the node about removing NFS_LEGACYRPC
Approved by: re
2009-07-01 18:12:50 +00:00
Doug Rabson
bab42aad98 Add an entry documenting removal of the NFS_LEGACYRPC option.
Submitted by: Steve Kargl
Approved by: re
2009-07-01 07:35:57 +00:00
Brooks Davis
6cb7f168db Remove support for the /dev/net/* per-interface devices. They serve
little purpose and are unused in the base system.

The IOCTL functionality is entirely duplicated and routing sockets
provide a richer interface than the kqueue functionality.

Further, it is not practical for these devices to be made sensible in
the face of VIMAGE.

Bump __FreeBSD_version on the off chance that there is any code out
there that actually uses this stuff.

Reviewed by:	rwatson
Discussed with:	bz, zec
Approved by:	re@ (kensmith)
2009-06-29 19:46:29 +00:00
Marc Fonvieille
944bc81da9 - release/* update to use freebsd-doc-* packages instead of building
FreeBSD docset during 'make release' this will speed up release
  builds;
- sysinstall(8) has also been updated to use these packages with a new
  menu allowing people to choose what localized doc to install;
- mention in UPDATING that docs from the FreeBSD Documentation project
  are now installed in /usr/local/share/doc/freebsd instead of
  /usr/share/doc.

Approved by:	re (kensmith)
2009-06-28 08:59:46 +00:00
John Baldwin
f5e4c1052a Note that as a result of the SYSV IPC changes, COMPAT_FREEBSD[456] now
require COMPAT_FREEBSD7.  Also, explicitly note in NOTES that any version
of COMPAT_FREEBSD<n> effectively requires for newer binaries (i.e.
COMPAT_FREEBSD<n+1>, etc.).  While this has been true in practice
previously, it used to compile ok before the commit earlier this week.

Discussed with:	peter
Approved by:	re (kensmith)
2009-06-26 17:50:52 +00:00
Doug Barton
b5820f18cc Revert the entry about pf and ipfw starting before netif 2009-06-26 01:10:10 +00:00