After progressively folding away null cases, it turns out there's
/literally/ nothing there, even if some things are part of the
Solaris SPARC DDI/DKI or the seventeen module types (some doubled for
32-bit userland), or the entire modctl syscall definition.
Nothing.
Initialisation is handled in illumos-crypto.c,
which calls all the initialisers directly
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Attila Fülöp <attila@fueloep.org>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#12895Closes#12902
This reverts commit f6a0dac84a.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes#12938
It turns out that we still need xlocal.h protection for when we're
cross building on Linux. Linux doesn't have this file, but os/x
does. Before, we'd assume we didn't have it, like old FreeBSD, when
cross compiling. After the latest update, all that code was removed so
cross compiling needs to be handled separaetly. Do so by defining
HAVE_XLOCALE_H only when we're not building on linux. This allows us
to build the mkmagic build tool needed to build file(1).
Sponsored by: Netflix
Reviewed by: jrtc27
Differential Revision: https://reviews.freebsd.org/D33741
in handling the cpuset sizes different from sizeof(cpuset_t).
For both cases, cpuset size shorter than sizeof(cpuset_t) results
in EINVAL on Linux.
For sched_getaffinity(), be more permissive and accept cpuset size
larger than our cpuset_t, by clipping the syscall argument and zeroing
the rest of the output buffer. For sched_setaffinity(), we should allow
shorter cpusets than current ABI size, again zeroing the rest of the bits.
With this change, python os.sched_get/setaffinity functions work.
Reported by: se
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The MINIMUM_SUPPORTED_OSREL is 1002501 (FreeBSD 10.3), and xlocale is
supported there.
While I'm there, explicitly use config.h generated with --disable-bzlib
--disable-xzlib instead of deleting them manually.
MFC after: 2 weeks
Do not redefine the fallthrough macro when building with libcpp.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Martin Matuska <mm@FreeBSD.org>
Closes#12880
Any error from lzc_send_redacted is overwritten by the error of
send_conclusion_record; skip writing the conclusion record if there
was an earlier error.
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Philipp Riederer <philipp@riederer.email>
Closes#12766
If I'm not mistaken, the underlying sendmsg() for nvlist_send() is
failing with ENOBUFS. In turn, nvlist_recv() returns NULL because it
didn't receive the expected number of file descriptors.
Adjusting net.local.dgram.recvspace worked on my local machine, but on
CI the test still fails consistently.
PR: 260891
This is a re-application of commit
2d82b47a5b, which was reverted since it
broke with syslog daemons that don't adjust the /dev/log recv buffer
size. Now that the default is large enough to accomodate 8KB messages,
restore support for large messages.
PR: 260126
As with other runtime components like libc or libcxxrt.
If desired we can stop linking devd statically after this change (to
achive approximately no net change in required root filesystem size).
We must set SHLIBDIR with ?= before including <src.opts.mk>, otherwise
that will have set SHBLIDIR to its default value of /usr/lib.
Otherwise, "make delete-old-libs" would suggest to delete libc++.so.1
from /usr/lib, while there was not yet a copy in /lib.
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33123
The introduction of <sched.h> improved compatibility with some 3rd
party software, but caused the configure scripts of some ports to
assume that they were run in a GLIBC compatible environment.
Parts of sched.h were made conditional on -D_WITH_CPU_SET_T being
added to ports, but there still were compatibility issues due to
invalid assumptions made in autoconfigure scripts.
The differences between the FreeBSD version of macros like CPU_AND,
CPU_OR, etc. and the GLIBC versions was in the number of arguments:
FreeBSD used a 2-address scheme (one source argument is also used as
the destination of the operation), while GLIBC uses a 3-adderess
scheme (2 source operands and a separately passed destination).
The GLIBC scheme provides a super-set of the functionality of the
FreeBSD macros, since it does not prevent passing the same variable
as source and destination arguments. In code that wanted to preserve
both source arguments, the FreeBSD macros required a temporary copy of
one of the source arguments.
This patch set allows to unconditionally provide functions and macros
expected by 3rd party software written for GLIBC based systems, but
breaks builds of externally maintained sources that use any of the
following macros: CPU_AND, CPU_ANDNOT, CPU_OR, CPU_XOR.
One contributed driver (contrib/ofed/libmlx5) has been patched to
support both the old and the new CPU_OR signatures. If this commit
is merged to -STABLE, the version test will have to be extended to
cover more ranges.
Ports that have added -D_WITH_CPU_SET_T to build on -CURRENT do
no longer require that option.
The FreeBSD version has been bumped to 1400046 to reflect this
incompatible change.
Reviewed by: kib
MFC after: 2 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D33451
Text requests and responses can span multiple PDUs. In that case, the
sender sets the Continue bit in non-final PDUs and the Final bit in
the last PDU. The receiver responds to non-final PDUs with an empty
text PDU.
To support this, add a more abstract API in libiscsi which accepts and
receives key sets rather than PDUs. These routines internally send or
receive one or more PDUs. Use these new functions to replace the
handling of TextRequest and TextResponse PDUs in discovery sessions in
both ctld and iscsid.
Note that there is not currently a use case for large Text requests
and those are still always sent as a single PDU. However, discovery
sessions can return a text response listing targets that spans
multiple PDUs, so the new API supports sending and receiving multi-PDU
responses.
Reported by: Jithesh Arakkan @ Chelsio
Reviewed by: mav
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D33548
As with other runtime components like libc or libcxxrt.
If desired we can stop linking devd statically after this change (to
achive approximately no net change in required root filesystem size).
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33123
The states macro is the type for engine.c to use, with states1 being a
local macro for regexec to use to determine whether it can use the small
matcher or not (by comparing nstates and 8*sizeof(states1)). However,
macro bodies are expanded in the context of their use, and so when
regexec uses states1 it uses the current value of states, which is left
over as char * from the large version (or, really, the multi-byte one,
but that reuses large's states). For all supported architectures in
FreeBSD, the two have the same size, and so this confusion is harmless.
However, for architectures like CHERI where that is not the case (or
Windows's LLP64 as discovered by LLVM and fixed in 2010 in 2e071faed8e2)
and sizeof(char *) is bigger than sizeof(long) regexec will erroneously
try to use the small matcher when nstates is between sizeof(long) and
sizeof(char *) (i.e. between 64 and 128 on CHERI, or 32 and 64 on LLP64)
and end up overflowing the number of bits in the underlying long if it
ever uses those high states. On weirder architectures where sizeof(long)
is greater than sizeof(char *) this also fixes it to not fall back on
the large matcher prematurely, but such architectures are likely limited
to the embedded space, if they exist at all.
Fix this by swapping round states and states1, so that states1 is
defined directly as being long and states is an alias for it for the
small matcher case.
Found by: CHERI
This will be used in future changes to support large text requests
spanning multiple PDUs.
Provide wrapper functions keys_load/save_pdu that operate use a PDU's
data buffer.
Reviewed by: mav
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D33547
When keys are loaded from a received PDU, a copy of the received keys
block is saved in the keys struct and the name and value pointers
point into that saved block. Freeing the keys frees this block.
However, when keys are added to a keys struct to build a set of keys
later sent in a PDU, the keys data block pointer is not used and
individual key names and values hold allocated strings. When the keys
structure was freed, all of these individual key name and value
strings were leaked.
Instead, allocate copies of strings for names and values when parsing
a set of keys from a received PDU and free all of the individual key
name and value strings when deleting a set of keys.
Reviewed by: mav
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D33545
Move some of the code duplicated between ctld(8) and iscsid(8) into a
libiscsiutil library.
Sharing the low-level PDU code did require having a
'struct connection' base class with a method table to permit separate
initiator vs target behavior (e.g. in handling proxy PDUs).
Reviewed by: mav, emaste
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D33544
Checking there are still bytes left must be done before dereferencing
the pointer, not the other way round. This is harmless on traditional
architectures since the result will immediately be thrown away, and all
callers are in separate translation units so there is no potential for
optimising based on this out-of-bounds read. However, on CHERI, pointers
are bounded, and so this will trap if fed a string that does not have a
NUL within the first len bytes.
Found by: CHERI
Reviewed by: brooks
__FBSDID() places the provided string in the output object's .comment
section. However, with the transition to Git $FreeBSD$ is no longer
expanded and so we emitted a literal $FreeBSD$.
$FreeBSD$ will be addressed in a holistic manner in the future, but at
least avoid embedding it into everything linked on FreeBSD (via csu).
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33594
It's useful for small image to fetch some data but we don't want to
install utilities nor bloat runtime.
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33463
Move some needed binaries/libs from FreeBSD-utilities to FreeBSD_runtime.
This is everything needed to boot to multiuser with FreeBSD-rc installed.
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33435
YP is less and less used, split them to users have the choice to not
install them.
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33441
This codepath used uint64_t's in place of pointers in structs and
arrays to allow 32-bit code to use 64-bit version of ioctls. Now
that we support 32-bit compat natively this is no longer needed.
Reviewed by: hselasky, jrtc27 (prior version)
This also works out to one syscall if the directory exists,
but is one syscall shorter if it doesn't.
Reviewed-by: Don Brady <don.brady@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#12067
The shares are publicly known anyway and can be interrogated by any
user, so this is a debugging aid more than anything.
Reviewed-by: Don Brady <don.brady@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#12067
pidfile_open() sets *pidptr to -1 if the process currently holding
the lock is between pidfile_open() and pidfile_write(),
the subsequent kill(mountdpid) would potentially SIGHUP all
non-system processes except init: just sleep for half a millisecond
and try again in that case
Reviewed-by: Don Brady <don.brady@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#12067
If sufficient memory (<2K, realistically) is available, libzfs_init()
can be significantly shorted by iterating over the correct sysfs
directory before registrations, we can turn 168 stats into 15/18
syscalls (3 opens (6 if built in), 3 fstats, 6 getdentses, and 3
closes), a tenfoldish reduction; this is probably a bit faster, too.
The list is always optional, and registration functions (and one-off
users) can simply pass NULL, which will fall back to the previous
mechanism
Also, don't allocate in zfs_mod_supported_impl, and use use access()
instead of stat(), since existence is really what we care about
Also, fix pre-prop-checking compat in fallback for built-in ZFS
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#12089
If the fields to be listed and sorted by are constrained
to those populated by dsl_dataset_fast_stat(), then
zfs list is much faster, as it does not need to open each
objset and reads its properties.
A previous optimization by Pawel Dawidek
(0cee24064a) took advantage
of this to make listing snapshot names sorted only by name
much faster.
However, it was limited to `-o name -s name`, this work
extends this optimization to work with:
- name
- guid
- createtxg
- numclones
- inconsistent
- redacted
- origin
and could be further extended to any other properties
supported by dsl_dataset_fast_stat() or similar, that do
not require extra locking or reading from disk.
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Closes#11080
. Disconnect imprecise.c from the build. This file can be deleted.
. Add b_tgammal.c to the build for ld80 and ld128 targets. The ld128
is a 'git mv' of imprecise.c to ld128/b_tgammal.c.
* lib/msun/ld80/b_expl.c:
. New file. Implement __exp__D for ld80 targets. This is based on
bsdsrc/b_exp.c.
* lib/msun/ld80/b_logl.c:
. New file. Implement __log__D for ld80 targets. This is based on
bsdsrc/b_log.c.
* lib/msun/ld80/b_tgammal.c b/lib/msun/ld80/b_tgammal.c
. New file. Implement tgammal(x) for ld80 targets.
Submitted by: Steve Kargl
Differential Revision: https://reviews.freebsd.org/D33444
Reviewed by: pfg
. Disconnect b_exp.c and b_log.c from the build.
* lib/msun/bsdsrc/b_exp.c:
. Replace scalb() usage with C99's ldexp().
. Replace finite(x) usage with C99's isfinite().
. Whitespace changes towards style(9).
. Remove include of "mathimpl.h". It is no longer needed.
. Remove #if 0 ... #endif code, which has been present since svn r93211
(2002-03-26).
. New minimax polynomial coefficients.
. Add comments to explain origins of some constants.
. Use ansi-C prototype. Remove K&R prototype. Add static to prototype.
* lib/msun/bsdsrc/b_log.c:
. Remove include of "mathimpl.h". It is no longer needed.
. Fix comments to actually describe the code.
. Reduce minimax polynomial from degree 4 to degree 3.
This uses newly computed coefficients.
. Use ansi-C prototype. Remove K&R prototype. Add static to prototype.
. Remove volatile in declaration of u1.
. Alphabetize decalaration list.
. Whitespace changes towards style(9).
. In argument reduction of x to g and m, replace use of logb() and
ldexp() with a single call to frexp(). Add code to get 1 <= g < 2.
. Remove #if 0 ... #endif code, which has been present since svn r93211
(2002-03-26).
. The special case m == -1022, replace logb() with ilogb().
* lib/msun/bsdsrc/b_tgamma.c:
. Update comments. Fix comments where needed.
. Add float.h to get LDBL_MANT_DIG for weak reference of tgammal to tgamma.
. Remove include of "mathimpl.h". It is no longer needed.
. Use "math.h" instead of <math.h>.
. Add '#include math_private.h"
. Add struct Double from mathimpl.h and include b_log.c and b_exp.c.
. Remove forward declarations of neg_gam(), small_gam(), smaller_gam,
large_gam() and ratfun_gam() by re-arranging the code to move these
function above their first reference.
. New minimax coefficients for polynomial in large_gam().
. New splitting of a0 into a0hi nd a0lo, which include additional
bits of precision.
. Use ansi-C prototype. Remove K&R prototype.
. Replace the TRUNC() macro with a simple cast of a double entities
to float before assignment (functional changes).
. Replace sin(M_PI*z) with sinpi(z) and cos(M_PI*(0.5-z)) with cospi(0.5-z).
Submitted by: Steve Kargl
Differential Revision: https://reviews.freebsd.org/D33444
Reviewed by: pfg
hwpmc has been utterly broken for userspace binaries, and has been
labeling all samples from userspace binaries as dubious frames. The
issues are that:
-The check for ph.p_offset & (-ph.p_align) == 0 was mostly bogus. The
intent was to ignore all executable segments other than the first,
which when using BFD appeared in the first page, but with current LLD
a read-only data segment appears before the executable segment,
pushing the latter into the second page or later. This meant no
executable segment was ever found, and thus pi_vaddr remained
0. Instead of relying on BFD's layout, track whether we've seen an
executable segment explicitly with a local bool.
-Shared libraries were not parsing the segments to calculate pi_vaddr,
resulting in it always being 0. Again, when using BFD, the executable
segment started at the first page, and so pi_vaddr was genuinely
meant to be 0, but not with LLD's current layout. This meant that
pmcstat_image_link's offset calculation gave the base address of the
segment in memory, rather than the base address of the whole library
in memory, and so when adding that to pi_start/pi_end to get the
range of the executable sections in memory it double-counted the
offset of the first executable segment within the library. Thus we
need to do the exact same parsing for ET_DYN as we do for ET_EXEC,
which is simpler to write as special-casing ET_REL to not look for
segments. Note that, whilst PT_INTERP isn't needed for shared
libraries, it will be for PIEs, which pmcstat still fails to handle
due to not knowing the base address of the PIE; we get the base
address for libraries by MAP_IN events, and for rtld by virtue of the
process's entry address being rtld's, but have no equivalent for the
executable.
Fixes courtesy of jrtc27@.
Reviewed by: jrtc27, jhb (earlier version)
Differential Revision: https://reviews.freebsd.org/D33055
Sponsored by: Netflix
This look like a copy and paste leftover.
Reported by: enh@google.com (via freebsd-numerics@)
Reviewed by: Steve Kargl <sgk@troutmask.apl.washington.edu>
MFC after: 3 days
Found by clang 14 with -Wunused-but-set-variable
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rich Ercolani <rincebrain@gmail.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#12829
This works around brokenness in buildworld's bootstrapping logic: it
uses the source tree's metadata to collect dependency info (such as,
"libdwarf depends on libz") but links against static host libraries.
If these two are out of sync, as is the case if one builds a commit
prior to the introduction of the libz dependency, then the build fails
when trying to statically link nm(1).
Mitigate the problem by defining a weak uncompress() symbol which simply
returns an error. This ensures that the build won't fail when
statically linking libdwarf without zlib. The downside is that any
tools using libdwarf without zlib will now hit a runtime error if they
attempt to decode compressed sections, but at least they'll fail
deterministically, and compressed debug info is only enabled by default
in main.
In particular, this fixes building of branches lacking commit
dbf05458e3, such as releng branches, stable/12 and 13 and old
revisions of main. Previously the nm(1) build would fail with:
ld: error: undefined symbol: uncompress
>>> referenced by libdwarf_elf_init.c:233
>>> (/usr/src/contrib/elftoolchain/libdwarf/libdwarf_elf_init.c:233)
>>> libdwarf_elf_init.o:(_dwarf_elf_init) in archive
>>> /usr/lib/libdwarf.a
Reported by: dim, ler, krion
Reviewed by: imp, emaste
Fixes: dbf05458e3 ("libdwarf: Support consumption of compressed ELF sections")
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33419
As with sha256 add support for accelerated sha512 support to libmd on
arm64. This depends on clang 13+ to build as this is the first release
with the needed intrinsics. Gcc should also support them, however from
a currently unknown release.
Reviewed by: cem
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33373
Add an idletime user group that allows non-root users to run processes
with idle scheduling priority. Privileges are granted by a MAC policy in
the mac_priority module. For this purpose, the kernel privilege
PRIV_SCHED_IDPRIO was added to sys/priv.h (kernel module ABI change).
Deprecate the system wide sysctl(8) knob
security.bsd.unprivileged_idprio which lets any user run idle priority
processes, regardless of context. While the knob is still working, it is
marked as deprecated in the description and in the man pages.
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D33338
Their uses have been replaced by _tcb_get() and _tcb_set() from
<machine/tls.h>.
Reviewed by: kib, jrtc27
Sponsored by: The University of Cambridge, Google Inc.
Differential Revision: https://reviews.freebsd.org/D33354
- Include <machine/tls.h> in MD rtld_machdep.h headers.
- Remove local definitions of TLS_* constants from rtld_machdep.h
headers and libc using the values from <machine/tls.h> instead.
- Use _tcb_set() instead of inlined versions in MD
allocate_initial_tls() routines in rtld. The one exception is amd64
whose _tcb_set() invokes the amd64_set_fsbase ifunc. rtld cannot
use ifuncs, so amd64 inlines the logic to optionally write to fsbase
directly.
- Use _tcb_set() instead of _set_tp() in libc.
- Use '&_tcb_get()->tcb_dtv' instead of _get_tp() in both rtld and libc.
This permits removing _get_tp.c from rtld.
- Use TLS_TCB_SIZE and TLS_TCB_ALIGN with allocate_tls() in MD
allocate_initial_tls() routines in rtld.
Reviewed by: kib, jrtc27 (earlier version)
Differential Revision: https://reviews.freebsd.org/D33353
Note that on amd64 this effectively removes the unused tcb_spare field
from the end of struct tcb since the definition of struct tcb in
<x86/tls.h> does not include that field.
Reviewed by: kib, jrtc27
Sponsored by: The University of Cambridge, Google Inc.
Differential Revision: https://reviews.freebsd.org/D33352
- Use 16 byte alignment rather than 8 for aarch64, powerpc64, and RISC-V.
- Use 8 byte alignment rather than 4 for 32-bit arm, mips, and powerpc.
I suspect that mips64 should be using 16 byte alignment, but both libc
and rtld currently use 8 byte alignment.
Reviewed by: kib, jrtc27
Sponsored by: The University of Cambridge, Google Inc.
Differential Revision: https://reviews.freebsd.org/D33350
This macro is confusing as it is not related to the similarly named
TLS_DTV_OFFSET. Instead, replace its one use with the desired
expression which is the same on all platforms.
Reviewed by: kib, emaste, jrtc27
Sponsored by: The University of Cambridge, Google Inc.
Differential Revision: https://reviews.freebsd.org/D33345
COMPILER_TYPE is not set during cleandir and perhaps other non-build
targets, and a build with ASAN or UBSAN enabled failed with an error
reporting that runtime libraries could not be built.
PR: 260099
Reviewed by: dim
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32805
Fix kvm_getloadavg() to work correctly on vmcores for modern kernel
versions. The kernels no longer include the `_fscale` symbol causing
the kvm_nlist() invocation to fail. The code seemed to already assume
that `_fscale` could be missing but the early kvm_nlist() result check
has caused the function to fail if any symbol were missing. Modify
it to only treat `_averunnable` as obligatory, and handle missing
`_fscale` gracefully.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32884
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes#12728
There's no point in a knob to avoid installing a half dozen manpages.
It's undocumented and unused in the tree. Online, the only metions
I've found are the FreeBSD source tree, a commit in DragonFly BSD
removing it, and some lists of build options for small systems where
it's inevitably redundant due to an accompanying NO_MAN.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D33310
Otherwise the asm stub is used and libthr interposition does not work.
Reviewed by: kib
Fixes: 21f749da82 ("libthr: wrap pdfork(2), same as fork(2).")
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Also use the term operation consistently, over the command.
Reviewed by: emaste, jhb, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D33277
that returns struct kinfo_file for the given file descriptor. Among
other data, it also returns kf_path, if file op was able to restore file
path.
Reviewed by: jhb, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D33277
When SOCK_DGRAM is used, a portion of the datagram is discarded during
the initial recv() when getting the nvlist_header.
To workaround this, use MSG_PEEK for the initial recv() when using a
datagram socket.
Add tests for SOCK_DGRAM with nvlist_send()/nvlist_recv().
Differential Revision: https://reviews.freebsd.org/D32722
Add two underscore characters "__" to names of BIT_* and BITSET_*
macros to move them to the implementation name space and to prevent
a name space pollution due to BIT_* macros in 3rd party programs with
conflicting parameter signatures.
These prefixed macro names are used in kernel header files to define
macros in e.g. sched.h, sys/cpuset.h and sys/domainset.h.
If C programs are built with either -D_KERNEL (automatically passed
when building a kernel or kernel modules) or -D_WANT_FREENBSD_BITSET
(or this macros is defined in the source code before including the
bitset macros), then all macros are made visible with their previous
names, too. E.g., both __BIT_SET() and BIT_SET() are visible with
either of _KERNEL or _WANT_FREEBSD_BITSET defined.
The main reason for this change is that some 3rd party sources
including sched.h have been found to contain conflicting BIT_*
macros.
As a work-around, parts of shed.h have been made conditional and
depend on _WITH_CPU_SET_T being set when sched.h is included.
Ports that expect the full functionality provided by sched.h need
to be built with -D_WITH_CPU_SET_T. But this leads to conflicts if
BIT_* macros are defined in that program, too.
This patch set makes all of sched.h visible again without this
parameter being passed and without any name space pollution due
to BIT_* macros becoming visible when sched.h is included.
This patch set will be backported to the STABLE branches, but ports
will need to use -D_WITH_CPU_SET_T as long as there are supported
releases that do not contain these patches.
Reviewed by: kib, markj
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D33235
This is a MAC policy module that grants scheduling privileges based on
group membership. Users or processes in the group realtime (gid 47) are
allowed to run threads and processes with realtime scheduling priority.
For timing-sensitive, low-latency software like audio/jack, running with
realtime priority helps to avoid stutter and gaps.
PR: 239125
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D33191
Some shared libraries specify mappings that leave a gap (actually a
MAP_GUARD mapping) in between the file mappings (libcrypto.so was
the one I found), and this would cause rd_loadobj_iter() to report
the mapping info incorrectly, leaving out rdl_path and misreporting
rdl_offset for file mappings after the gap. Fix rd_loadobj_iter()
to handle this situation.
Reviewed by: markj
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D32950
ki_fd is legitimately NULL when 32bit process requests process data
from 64bit host kernel. The field is not used by the code for sysctl
case; procstat_getfiles_kvm() checks ki_fd.
PR: 260174
Reported by: Damjan Jovanovic <damjan.jov@gmail.com>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This reverts commit 266f97b5e9, reversing
changes made to a10253cffe.
A mismerge of a merge to catch up to main resulted in files being
committed which should not have been.
Section 9.5 of RFC 6458 (SCTP Socket API) requires that
sctp_getladdrs() returns 0 in case the socket is unbound. This
is the cause of reporting 0 addresses. So don't indicate an
error, just report this case as required.
PR: 260117
MFC after: 1 week
When calling getsockopt() with SCTP_GET_LOCAL_ADDR_SIZE, use a
pointer to a 32-bit variable, since this is what the kernel
expects.
While there, do some cleanups.
MFC after: 1 week
Reviewed-by: Felix Dörre <felix@dogcraft.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes#12765
The restriction that an encryption key must be at least
MIN_PASSPHRASE_LEN characters long make sense when changing the
encryption key, but not when loading: as this restriction is not
enforced in the libraries, it is possible to bypass zfs change-key's
restrictions and end up with a key that becomes impossible to load with
zfs load-key, for example through pam_zfs_key.
Reviewed-by: Felix Dörre <felix@dogcraft.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Harald van Dijk <harald@gigawatt.nl>
Closes#12765
After interrupting ZTS runs that errored out, I found that
"zpool export testpool2" was segfaulting.
This seems unnecessary.
Reviewed-by: szubersk <szuberskidamian@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes#12804
- Allocate ve_search on the stack, so we avoid allocating memory for
every I/O even if the VDEV cache is disabled.
- Reduce lock scope.
- Avoid locking in vdev_cache_read() when the VDEV cache is disabled.
- Sort file names properly.
- Correct comment.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Closes#12749
This reverts commit 2886c93d1b.
The original commit has two problems:
* It sets SO_SNDBUF to be as large as MAXLINE. But for unix domain
sockets, the send buffer is bypassed. Packets go directly to the
peer's receive buffer, so setting and querying SO_SNDBUF is
ineffective. To ensure that the socket can accept messages of a
certain size, it would be necessary to add a SO_PEERRCVBUF socket
option that could query the connected peer's receive buffer size.
* It sets MAXLINE to 8 kB, which is larger than the default sockbuf size
of 4 kB. That's ok for the builtin syslogd, which sets its recvbuf
to 80 kB, but not ok for alternative sysloggers, like rsyslogd, which
use the default size.
As a consequence, writing messages of more than 4 kB with syslog() as a
non-root user while running rsyslogd would cause the logging application
to spin indefinitely within syslog().
PR: 260126
MFC: 2 weeks
Sponsored by: Axcient
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D33199
Add properties, similar to pool properties, to each vdev.
This makes use of the existing per-vdev ZAP that was added as
part of device evacuation/removal.
A large number of read-only properties are exposed,
many of the members of struct vdev_t, that provide useful
statistics.
Adds support for read-only "removing" vdev property.
Adds the "allocating" property that defaults to "on" and
can be set to "off" to prevent future allocations from that
top-level vdev.
Supports user-defined vdev properties.
Includes support for properties.vdev in SYSFS.
Co-authored-by: Allan Jude <allan@klarasystems.com>
Co-authored-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Closes#11711
Namely posix_spawn_file_actions_addclosefrom_np, in the form it is
provided by glibc.
Reviewed by: kevans, ngie (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D33143
to wrap too long lines with function prototypes.
Reviewed by: kevans, ngie (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D33143
In _citrus_prop_read_TYPE_func_ generated functions, do not ignore parsed
'-' sign, negate the value as appropriate.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D33146
It receives the malloc() result, and we do not want the malloc() call
to be optimized out, which is allowed for hosted compiler. Use dummy
for actual write though.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The variables clang13 complains about take the results of var_arg() calls.
I decided to kept variables around, annotating their definitions with
__unused, to keep clear expected types of the varargs.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
bsddialog is an attempt to write in permissive license a replacement for
libdialog.
While it is still in early stage it is good enough to already be used in
many areas, it is imported as private lib until it matures enough to be
considered as having a stable ABI
