just the GENERIC kernels for each arch (including variations such as
GENERIC-NODEBUG, GENERIC64, etc).
This helps with quickly doing a test build for all[*] arches without
building dozens of variant kernels for the arches that have lots of
hardware/board/system variations.
[*] Not all arches have a generic kernel (but they probably should for
test-building purposes, even if it can't boot on any real hardware).
The testcase fails today, so mark it with atf_expect_fail: in
particular, the target (B) isn't being unlinked and the documentation
doesn't suggest special handling for directories. Thus, there's either
a doc or an implementation bug in ln(1) that needs to be resolved.
MFC after: 1 month
MFC with: r319714, r319854, r319855
PR: 219943
Reviewed by: ngie
Submitted by: shivansh
Differential Revision: D11159 (part of a larger diff)
Sponsored by: Google, Inc (GSoC 2017)
file(1) can be compiled out of the system via MK_FILE == no, and the
output isn't guaranteed to be stable. It's better to use stat(1)/readlink(1)
instead to query symlink/file paths.
MFC after: 1 month
MFC with: r319714, r319854
Reported by: ngie
Submitted by: shivansh
Differential Revision: D11159 (part of a larger diff)
Sponsored by: Google, Inc (GSoC 2017)
This file does not exist in NetBSD's makefs, but make the chance for
consistency with memcpy/memset used in the rest of makefs.
Sponsored by: The FreeBSD Foundation
After r319369, the RPC code validates caller supplied buffer length in
taddr2uaddr. When no -h is specified, the sizeof(ai_addr) is used,
which is always smaller than the required size and therefore uaddr
would be NULL, causing the kernel to copyin() from userland NULL
and fail with EFAULT.
Reviewed by: kevlo (via Telegram)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D11151
Tests that exercise the following flags are added in this commit:
- -A
- -H
- -I
- -g
- -h
- -k
- -m
Additional tests will be added soon.
MFC after: 1 month
These are were created proactively, in anticipation of the support being
fully implemented sometime in the future.
The tests currently fail on ^/head@r319845, however. Expect them to fail.
PR: 219933
Tested with: gdiff
A previous iteration of the tests I added in r319844 involved free(3), but
that attempt didn't pan out, so I switched to stack allocated buffers instead
of heap allocated ones, making the #include unnecessary.
MFC after: 1 month
MFC with: r319844
gets output via warnx(3)
This helps set expectations for how one might deal with those messages, i.e.,
mute output from /dev/stderr today, since that's where vwarn(3) outputs messages
to today.
MFC after: 1 month
Testcases for -H, -L, and -f haven't been implemented yet, in part due
to additional complexity needed to validate the features:
* -H and -f will require an external "helper" program to display/modify
the state/permissions for a given path.
* -L is being covered partially via the -n testcase today.
MFC after: 1 month
The tests are largely symmetric with the tests for chmod(1)--added in r319642.
Remove chown-f_test (added in r268030) since the test coverage is now being
provided by `chown_test`.
MFC after: 1 month
Sponsored by: Dell EMC Isilon
When /etc/rc runs all /etc/rc.d scripts, it has already loaded /etc/rc.subr
but each /etc/rc.d script sources it again (since /etc/rc.d scripts must
also work when started stand-alone).
Therefore, if rc.subr is already loaded, return so sh need not parse the
rest of the file.
A second effect is that there is no longer a compound command around most of
rc.subr. This reduces memory usage while sh is loading rc.subr for the first
time (but this memory is free()d once rc.subr is loaded).
For purposes of porting this to other systems, I do not recommend porting
this to systems with shells that do not have the change to the return
special builtin like in r255215 (before FreeBSD 10.0-RELEASE). This change
ensures that return in the top level of a dot script returns from the dot
script, even if the dot script was sourced from a function.
A comparison of CPU time on an amd64 bhyve virtual machine from a times
command added near the end of /etc/rc, all four values summed:
x orig1
+ quickreturn
+--------------------------------------------------------------------------+
| + + + x x x|
||______M__A_________| |______M___A__________| |
+--------------------------------------------------------------------------+
N Min Max Median Avg Stddev
x 3 1.704 1.802 1.726 1.744 0.051419841
+ 3 1.467 1.559 1.487 1.5043333 0.048387326
Difference at 95.0% confidence
-0.239667 +/- 0.113163
-13.7424% +/- 6.48873%
(Student's t, pooled s = 0.0499266)
Some people may want to drop UFS-style ACLs for slimmer kernels.
Let's just not assume everyone needs ACLs.
Reported by: bde
Submitted by: Fedor Uporov
Differential Revision: https://reviews.freebsd.org/D11145
Do not try to set LMA bit while CPU is still in legacy mode.
Apparently Intel CPUs ignore non-id writes to LMA, while AMD's
(over-)react with #GP.
Reported and tested by: danfe
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Zap trailing white and double spaces
Remove extra coma which is not required.
Bump date.
Reviewed by: gnn
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D11142
system retrieve its config data from the fdt data.
The properties that are common to all phys are decoded and returned in a
structure. The fdt node handles for the mac and phy devices are also
returned in the config data struct, so a driver can easily obtain additional
hardware-specific config values from the fdt data.
While the initial need for this is to help support phy drivers which are
configured with FDT data, there is nothing devicetree-specific about the
concept or the names, so they are available for use even on non-FDT systems.
The initial list of connection types comes from the current devicetree
bindings documentation, but values not documented there can be added to
the list in the future as needed, the values could be sorted into a
different order without perturbing FDT code, etc. The only invariant
is that MII_CONTYPE_UNKNOWN should be first (so it has a value of zero,
so that a con-type variable in a softc, for example, is initialized to
MII_CONTYPE_UNKNOWN by default).
After harvesting the hardware statistics counters and summing them into the
interface stats, properly clear the hardware counters back to zero. On imx5
and earlier hardware it is necessary to disable collection of stats while
writing zeroes to all the registers. On imx6 and newer it turns out it's
not even possible to write zeroes, instead you have to toggle a special
"zero everything" control bit in a register.
Count incoming packets with a bad start frame delim as input errors, and
incoming packets dropped due to no fifo space as input drops.
Remove all code related to harvesting the hardware stats less often than
once per second. It turns out the 32-bit stats registers are backed by
16-bit counters under the hood, and they can easily roll over if you only
harvest them once every 3 seconds like the old code was doing. Now we just
read all the regs once a second.
The combination of not properly zeroing the stats registers and 16-bit
counters sometimes wrapping between harvest calls resulted in basically
unusable statistics before these changes.
- Always unlink $cmd after exit via END block.
- The tests don't function well if kern.geom.debugflags != 0. Save debugflags,
then restore them at the end of the test.
MFC after: 1 month
Sponsored by: Dell EMC Isilon
This will allow the tool to be used with arbitrary geom(4) classes, like GEOM.
Specify class=PART explicitly in the tester to keep existing behavior.
MFC after: 1 month
Sponsored by: Dell EMC Isilon
in /boot/defaults/loader.conf to something that's actually commonly used,
"mdroot". It's arbitrary, but it's easier to find this way.
MFC after: 2 weeks
Description from Brett:
"The busdma tags used to create mappings for the tx and rx rings did not have
the device's tag as parents, meaning that they did not respect the device's
busdma properties. The other tags used in the driver had their parents set
appropriately.
Also, the dma maps for each buffer in ixl_txeof() were being NULLed after
being unloaded, which is an error because those maps are then reused without
being recreated (I believe this also leaked resources since the maps were not
destroyed). Simply removing the line that sets the maps to NULL gives the
desired behavior. There does not seem to be a similar problem with ixl_rxeof().
Functions to free the tx and rx rings also NULL out the dma maps for each
buffer, but this seems okay because the maps are destroyed and not reused in
this case.
With these fixes, my ixl card seems to be working with the IOMMU enabled."
Submitted by: Brett Gutstein <bgutstein@rice.edu>
Reviewed by: erj
Approved by: Alan Cox <alc@rice.edu>
MFC after: 1 week
now. The option does not presently work. However, similar functions in
ipfstat (for state) and ipnat (for nat) do work and provide outputs that
can be easily parsed by shell scripts or subsequently loaded into CSV
files. The intention here is to return to this option to make it work.
I suspect the problem is in printpoolfields.c.
